2000-11-30  Drew Moseley  <dmoseley@redhat.com>

	* include/hal_arch.h: Handle Cygmon interrupt stack.  ie For
	Cygmon we must switch to a new stack immediately on exception to
	make sure that we don't modify the application stack at all since
	GDB may be using it.
	* src/vectors.S: Ditto.

2000-10-20  Jesper Skov  <jskov@redhat.com>

	* src/hal_misc.c: Update __mem_fault_handler declaration.

2000-09-04  Jonathan Larmour  <jlarmour@redhat.com>

	* include/basetype.h (CYGARC_ALIGNMENT): mn10300 has 4 byte alignment
	(CYGARC_P2ALIGNMENT): Likewise

2000-08-29  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* src/vectors.S (__default_nmi_vsr): Fix quoting in comment problem

2000-08-15  Drew Moseley  <dmoseley@redhat.com>

	* src/mn10300_stub.c (__is_breakpoint_function): Prepend an _ to
	breakinst.  Apparently the symbol generation has changed requiring
	this.

2000-08-14  Drew Moseley  <dmoseley@redhat.com>

	* src/vectors.S: Use some generic MN10300 code rather than AM33-specific.

	* src/mn10300_stub.c (__computeSignal): Make sure SIGSYSCALL is
	defined before returning it.

2000-08-12  Drew Moseley  <dmoseley@redhat.com>

	* include/mn10300_stub.h: More rearranging of GDB regnames.

2000-08-11  Drew Moseley  <dmoseley@redhat.com>

	* include/mn10300_stub.h: Rearranged regnames to correspond to
	what GDB is expecting.

	* include/arch.inc: Fixed error in declaration of hal_intc_decode.

2000-08-10  Drew Moseley  <dmoseley@redhat.com>

	* src/vectors.S: Added syscall handling.
	Added HAL_EARLY_INIT.
	Added CTRLC_SUPPORT.
	Added CYGMON support.

	* src/mn10300_stub.c: Added breakpoint list handling.
	Added syscall handling.

	* src/hal_misc.c (cyg_hal_exception_handler): Added support for
	exceptions caused by the stubs which are passed transparently
	back.
	Also added VIRTUAL_VECTOR support.

	* include/hal_arch.h: Added HAL_BREAKINST_TYPE.
	Added Cygmon support.

	* cdl/hal_mn10300.cdl: Added option for CTRLC_SUPPORT.
	* include/pkgconf/hal_mn10300.h: Ditto.

2000-06-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h: Added underscores to label in
	HAL_BREAKINST().

	* include/basetype.h:
	Removed definition of CYG_LABEL_NAME() and added one for
	CYG_LABEL_DEFN().

2000-06-08  Jesper Skov  <jskov@redhat.com>

	* include/hal_arch.h (CYGARC_HAL_SAVE_GP, CYGARC_HAL_RESTORE_GP):
	Added.

2000-03-20  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* src/vectors.S (__default_interrupt_vsr): Pass variant-specific PC
	offset from register context into cyg_hal_gdb_isr()

	* include/hal_arch.h: Move HAL_SavedRegisters into variant HALs

2000-03-19  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* include/mn10300_stub.h: Make C++ safe

2000-02-16  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_mn10300.cdl: remove fix me.

1999-11-09  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_intr.h (HAL_RESTORE_INTERRUPTS): Ensure we restore the
	old state exactly, including "restoring" by disabling interrupts
	Requested by Matsushita in case 102544

1999-12-02  John Dallaway  <jld@cygnus.co.uk>

	* cdl/hal_mn10300.cdl:

	Use the <PACKAGE> token in custom rules.

1999-12-01  John Dallaway  <jld@cygnus.co.uk>

	* cdl/hal_mn10300.cdl:

	Use the <PREFIX> token in custom rules.

1999-11-04  John Dallaway  <jld@cygnus.co.uk>

	* cdl/hal_mn10300.cdl:

	Output custom rule dependency information to .deps files in
	the current directory.

	Dispense with the need to create a 'src' sub-directory.

1999-11-03  Jesper Skov  <jskov@cygnus.co.uk>

	* cdl/hal_mn10300.cdl: Added.

1999-09-10  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_cache.h: Change CYG_HAL_MN10300_SIM to
	CYG_HAL_MN10300_AM31_SIM
	Only include var_cache.h when not sim

1999-08-18  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_exception_handler):
	Use CYGNUM_HAL_EXCEPTION_WATCHDOG rather than
	CYGNUM_HAL_INTERRUPT_WATCHDOG in test for watchdog exceptions.

1999-08-17  Nick Garnett  <nickg@cygnus.co.uk>

	* include/arch.inc: Modified hal_cpu_int_merge to avoid corrupting
	any registers other than the one passed as an argument.

1999-08-16  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/arch.inc: rename CYGPKG_HAL_MN10300_AM32_STDEVAL1 to
	CYGPKG_HAL_MN10300_AM31_STDEVAL1

1999-08-13  Nick Garnett  <nickg@cygnus.co.uk>

	* include/arch.inc: Moved AM33 trace address to uncached memory
	window.

	* src/vectors.S (_start): Tidied away some superfluous trace
	code.
	
1999-08-12  Nick Garnett  <nickg@cygnus.co.uk>

	Imported following changed from development branch.
	
    1999-08-11  Nick Garnett  <nickg@cygnus.co.uk>	

	* src/vectors.S: Removed debug code.

	* include/hal_intr.h: Made mn10300_interrupt_control[] unsized
	since it is different sizes on different variants.

	* include/arch.inc:
	Changed hal_cpu_int_merge so that both the IE and IPL bits are
	changed across a thread switch.
	Some minor tweaks to trace code for AM32.

    1999-08-10  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/pkgconf/hal_mn10300.h:
	Move CYGPKG_HAL_MN10300's "target mn10300" under the variant
	packages instead.
	Add CYGPKG_HAL_MN10300_VARIANTS

    1999-07-30  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c: Added default ISR.

	* src/vectors.S:
	Added Ctrl-C support. Extended VSR table to include new
	exceptions. Install default ISR by default.

	* src/mn10300_stub.c:
	Added asynchronous breakpoint support.
	[Later] Tidied up install_async_breakpoint() and fixed indirection
	bug.

	* include/hal_intr.h:
	Added default ISR. Removed HAL_INTERRUPT_CONFIGURE(), this is now
	variant-specific.

    1999-07-27  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: 
	Some reorganization to make code more generic.
	Some diagnostic macros added.
	Note: some trace/debug code has been left in place temporarily,
	this will be removed eventually.

	* include/mn10300_stub.h: Added extra regnames for AM33.

	* include/hal_arch.h:
	Added macros to get and set extra registers for AM33.
	* include/arch.inc:
	Changed all *_MIPS_* to *_MN10300_*.
	Added some temporary trace/debug macros.

    1999-07-16  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c: 
	* include/hal_arch.h:
	Added hal_idle_thread_action();

	* include/arch.inc: Made hal_cpu_init definition optional.

    1999-07-08  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: 
	Moved some code to variant specific macros. Now pass ISR register
	to cyg_hal_exception_handler() to enable further decoding.
	
	* src/hal_misc.c (cyg_hal_exception_handler):
	Added extra argument to pass ISR register value. Now decodes ISR
	value to specify extra exceptions.

    1999-07-07  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	Added HAL_INTERRUPT_STACK_CALL_PENDING_DSRS() macro to support
	calling of DSRs on the interrupt stack.

	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT):
	Initialize the PSW to enable all interrupts on entry to thread.

	* include/arch.inc:
	Added implementations of CPU control macros.

	* src/context.S:
	Added code to preserve PSW across context switches.

	* src/vectors.S:
	Implemented mechanism to call DSRs on the interrupt stack.
	Refined condition for defining VSR table here.

    1999-06-30  Nick Garnett  <nickg@cygnus.co.uk>

	* src/context.S: 
	* src/vectors.S:
	Use hal_cpu_save_all and hal_cpu_load_all macros to save and
	restore CPU register sets.

	* include/hal_arch.h:
	Modified HAL_THREAD_INIT_CONTEXT_EXTRA() to take some arguments.

    1999-06-29  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h:
	Added code in preparation for AM33 port.
	Added include of variant header.

	* include/hal_cache.h: 
	* include/hal_intr.h: 
	* src/vectors.S:
	* src/hal_misc.c: 
	Extensive changes to convert to new HAL organization. These mostly
	involve moving variant and platform specific stuff out to the
	appropriate headers in the variant and platform directories.

	* src/PKGconf.mak:
	* src/mn10300.ld (removed):
	Moved build of target.ld to variant directory.

	* include/arch.inc:
	Added this file to contain architecture specific macros.
	
1999-06-08  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_dcache_store): Only define for HW target.

1999-06-07  Jesper Skov  <jskov@cygnus.co.uk>
        PR 20136
	* src/hal_misc.c (cyg_hal_dcache_store): 
	* include/hal_cache.h (HAL_DCACHE_STORE):
	DCACHE store operation needs 4 register variables. Put it in a
	separate function to ensure registers are availble.

1999-05-21  Hugo Tyson  <hmt@masala.cygnus.co.uk>

	* include/hal_intr.h: Define HAL_INTERRUPT_STACK_BASE and
	HAL_INTERRUPT_STACK_TOP so that stack usage macros in
	kernel/.../stackmon.hxx can work.

	* src/vectors.S (cyg_interrupt_stack_base): Define this symbol for
	the interrupt stack and its friend for the stack top so that we
	can publish them with nice names.

1999-05-13  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Align stack
	(rather conservatively) before use.

1999-04-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak:
	Remove the -n argument to tail, it does not appear to be required
	on any supported host and causes problems with some
	implementations of tail.

1999-04-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_cache.h: 
	(HAL_DCACHE_IS_ENABLED) (HAL_ICACHE_IS_ENABLED): Add these new macros
	(HAL_DCACHE_DISABLE) (HAL_ICACHE_DISABLE): Make variables register
	variables
	Ensure the cache has finished its operation before exitting.
	(HAL_DCACHE_INVALIDATE_ALL) (HAL_ICACHE_INVALIDATE_ALL): Make
	variables register variables.
	Re-enable cache if it was enabled on entry.
	(HAL_DCACHE_WRITE_MODE): Make variables register variables.
	Re-enable data cache if it was enabled on entry.
	Ensure the cache has finished its operation before exitting.
	(HAL_DCACHE_STORE): Make variables register variables.
	Re-enable data cache if it was enabled on entry.

	These fix PR19887

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/mn10300.ld: Define __bss_end at the end of the BSS
	* src/vectors.S (_start): Use __bss_end rather than _end when clearing
	BSS
	These fix PR 19750

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c:
	* src/vectors.S:
	Separate parts of cyg_hal_invoke_constructors() out into new functions
	cyg_hal_enable_caches() and cyg_hal_debug_init() so that
	cyg_hal_invoke_constructors() can be called again safely if
	necessary
	Fix for PR19642

1999-04-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/PKGconf.mak (EXTRAS): Don't generate extras.o here any more
	But do define EXTRAS every time for the linker script.

1999-04-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/mn10300_stub.c: 
	Moved get_register and put_register to hal_stub.c.

1999-04-08  John Dallaway  <jld@cygnus.co.uk>

	* src/*.ld: Revised SECTION_* macro arguments to
	avoid padded output sections (PR 19787)

1999-03-31  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Align initial SP
	to a 4 byte boundary. Fixes PR 19695.

	* include/hal_cache.h: Added include of hal.h and a test that a
	valid set of macros have been added.

1999-03-26  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h (CYGNUM_HAL_STACK_SIZE_MINIMUM): Be a little
	more generous since this stack should allow at least a kernel API
	call which could be at least 4 levels deep.

1999-03-23  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h:
	Modified stack size definitions to be more accurate.

1999-03-22  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/mn10300_stub.h: Update copyright

	* src/mn10300_stub.c: Update copyright

1999-03-22  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_arch.h: 
	Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of
	CYGNUM_HAL_MINIMUM_STACK_SIZE.

1999-03-19  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	* src/vectors.S:
	Fixed problem with taking breakpoints after watchdog interrupts
	and memory access exceptions. See the comments in
	__default_nmi_vsr in vector.S for details.

1999-03-17  John Dallaway  <jld@cygnus.co.uk>

	* src/PKGconf.mak: Remove dependence on echo '-e' switch.

1999-03-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h: Add definition of 'CYGNUM_HAL_MINIMUM_STACK_SIZE'

1999-03-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_INTERRUPT_ATTACH): Added.

1999-03-08  Nick Garnett  <nickg@cygnus.co.uk>

	* src/mn10300.ld:
	Added alignment before definition of __DEVTAB__.

1999-03-05  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/PKGconf.mak: 
	* src/mn10300.ld: Clean up I/O package changes.

1999-03-04  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/mn10300.ld: 
	Unconditionalize use of libextras.a and add to GROUP()

1999-02-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Now tests for whether the kernel is present before trying to use
	patch_dbg_syscalls().

	* include/hal_intr.h (HAL_INTERRUPT_CONFIGURE): fixed some compile
	bugs in this macro.

	* src/vectors.S:
	Changed label used to access scheduler lock to one that is not
	mangled by C++. This is intended to make support for interrupt
	handling in non-kernel configurations easier.

1999-02-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_arch.h: 
	Rename deliver_exception() -> cyg_hal_deliver_exception()
	QA improvements

	* include/hal_intr.h:
	Reorganise vector/interrupt/exception names according to purpose
	QA improvements

	* src/hal_misc.c:
	Rename deliver_exception() -> cyg_hal_deliver_exception()
	Rename CYG_VECTOR_* according to hal_intr.h changes above
	QA improvements

	* src/vectors.S:
	Rename exception_handler() -> cyg_hal_exception_handler()
	
1999-02-16  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Changed set_debug_traps to initialize_stub.

	* src/mn10300_stub.c: 
	* include/mn10300_stub.h: 
	Cleaned up to only include arch specific stub code.

1999-02-15  Jesper Skov  <jskov@cygnus.co.uk>

	* include/basetype.h: Added CYG_LABEL_NAME macro.

1999-02-11  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_STORE):
	Added "register" keywords to the variables used in this macro. If
	these are not in registers then when the cache is disabled, they
	can be stranded in the cache and the random values in main memory
	are used instead. This is only a problem when optimization is
	disabled; under optimization the compiler puts these variables
	into registers as a matter of course.
	Fixes PR 19165.
	(HAL_DCACHE_SYNC): Divide cache size by number of ways to
	calculate correct size to pass to HAL_DCACHE_STORE().

1999-02-05  John Dallaway  <jld@cygnus.co.uk>

	* src/mn10300.ld: Add LMA_EQ_VMA macro definition.

1999-02-01  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h: Fixed implementation of HAL_DCACHE_STORE() so
	that it now works, and changed implementation of HAL_DCACHE_SYNC()
	to use it.
	Fixes PR 18577 and is a better fix to 18849.
	
1999-01-27  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	* src/vectors.S:
	Allow for NMI vectors in ISR table when using chained
	interrupts. This largely consists of moving the interrupt vector
	slots up by 3 entries.

1999-01-26  Hugo Tyson  <hmt@masala.cygnus.co.uk>

	* src/mn10300.ld:
	Add copyright notice.  (Though these files will later be generated
	by a tool and so not copyright, these default setups are.)

1999-01-25  Jesper Skov  <jskov@cygnus.co.uk>

	* src/mn10300_stub.c (__build_t_packet): Rewrote fix me text. Added PR
	number, but otherwise left the note.

1999-01-25  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_SYNC): Add implementation of
	this macro to enable test programs to work.
	Fixes PR 18849.	

1999-01-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_invoke_constructors): 
	Add code to deal with CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG
	Tidy up and update description header
	Shorten needlessly long lines
	Remove all traces of non-CYG_KERNEL_USE_INIT_PRIORITY code

1999-01-14  John Dallaway  <jld@cygnus.co.uk>

      * src/mn10300.ld: do not define _hal_vsr_table for minimal
      simulator builds

1999-01-13  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h: CYG_DOUBLE_BYTEORDER now in <infra/cyg_type.h>

1999-01-13  John Dallaway  <jld@cygnus.co.uk>

      * src/mn10300.ld: define FOLLOWING () macro to simplify
      hand editing of linker script fragments

1999-01-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h (CYG_DOUBLE_BYTEORDER): Define ordering
	for words within doubles.

1999-01-12  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c: Altered call to patch_dbg_syscalls() to pass
	pointer to base of vector rather than a single vector entry.

1999-01-12  John Dallaway  <jld@cygnus.co.uk>

      * src/mn10300.ld: new linker script for MLT
      * src/PKGconf.mak: add mn10300.ld rules for MLT

1998-12-15  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h: 
	* src/context.S (_hal_setjmp, _hal_longjmp):
        Added CYGARC definitions for jmpbuf entries.
	
1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_UNLOCK_ALL,
	HAL_ICACHE_UNLOCK_ALL): Added.

1998-11-25  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h (HAL_REORDER_BARRIER): Changed to same form
	as on the other archs.

1998-11-18  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_intr.h: Add support for interrupt latency
	measurement, controlled by CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY.

1998-11-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr): Added GDB break
	support.
	Added call to GDB initialization during startup.

	* src/mn10300_stub.c: Changed instruction word type.

1998-11-06  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/PKGconf.mak: 
	Added stub to object list.

	* include/mn10300_stub.h: 
	* src/mn10300_stub.c:
	Added GDB stub.
	
	* src/hal_misc.c (exception_handler): Added GDB stub call.

1998-11-06  Jesper Skov  <jskov@cygnus.co.uk>

	* include/basetype.h (CYG_BYTEORDER): Fixed comment.

1998-11-16  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h:
	Added volatile keyword to appropriate places to prevent compiler
	optimizing out cache control register access.

1998-10-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h (HAL_CLOCK_READ):
	Fixed this macro to return correct value.

1998-10-16  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S (__interrupt_stack):
	Made the interrupt stack size configurable.

1998-10-16  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Enabled caches by default.

1998-10-13  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Altered ifdefs to allow builds without kernel.

Thu Sep 24 18:14:19 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: Read the interrupt control registers back
	after writing to them to ensure that the value is not sitting in
	the store buffer.
	Also put _ around variable names in HAL_INTERRUPT_CONFIGURE for
	consistency.
	
1998-09-24  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	Inverted mask for level in HAL_INTERRUPT_SET_LEVEL().

	* src/vectors.S:
	Added correct implementations of decode_interrupt macro for
	chained interrupt processing.
	Modified call to cyg_instrument() to pass table offset as well as
	vector number.
	Include <pkgconf/kernel.h> to allow call to cyg_instrument() to be
	enabled.

1998-09-14  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak:
	Made vectors.o dependent on the various files that can contain
	makefile variables or rules. This is needed after changes to
	pkgconf.tcl for PRs 17195 and 17286.

Mon Sep 14 11:08:40 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>
        PR 17230
	
	* include/hal_intr.h: 
	* src/vectors.S: 
	Replaced CYGIMP_KERNEL_INTERRUPTS_CHAIN with new
	CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN.

1998-09-12  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_mn10300.h:
	Added missing descriptions (PR 17184)

	* src/hal_misc.c (exception_handler): 
	Sort out exception handling options (PR 16953)

Thu Sep 10 20:24:02 1998  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr): 
	Fix a bug.  Wrong offset when restoring the PSW tends to screw
	things up rather.

Thu Sep 10 15:12:21 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>
        PR 17153

	* src/vectors.S (__default_interrupt_vsr): Pass correct vector
	value to isr.

1998-09-09  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h:
	Removed distinction between interrupt and thread switch contexts
	in HAL_SavedRegisters. Modified appropriate macros to reflect this.

	* src/hal_misc.c (cyg_hal_invoke_constructors):
	Added call to patch_dbg_syscalls() for Cygmon hosted builds.

	* src/context.S (_hal_thread_switch_context):
	Adjust thread context so that it has the same structure as the
	state saved by interrupt and exception handlers. This makes
	supporting thread-aware debugging easier.

	* src/vectors.S:
	Moved nmi and trap vectors to correct slots in vsr table.
	Now place arg3 of interrupt_end() in correct stack slot.

1998-09-04  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr):
	Fixed type in configuration option name.

Thu Sep  3 15:15:57 1998  Tim Goodwin  <tgoodwin@cygnus.co.uk>

	* hal/mn10300/arch/current/src/PKGconf.mak
	* hal/mn10300/arch/current/src/makefile
	* hal/mn10300/arch/current/tests/PKGconf.mak

	s/panx/mn10300/g

1998-09-03  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Fixed offset bug in __trap.
	Changed conditionals on runtime initialisation of VSR table to not
	do it in simulated targets.

1998-09-02  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_mn10300.h:
	New header file for architecture-specific configuration options

	* tests/PKGconf.mak: 
	* src/PKGconf.mak: 
	Sort out package naming conventions.

1998-09-02  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Moved NMI and TRAP VSRs down 1 word to match cygmon's use of the
	vector table. This may need to change back in the future.

1998-09-01  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	Added CYG_VSR_COUNT, CYG_EXCEPTION_COUNT and CYG_ISR_COUNT.
	Modified HAL_TRANSLATE_VECTOR() for mn103002 to provide slots
	for the NMI vectors at start of hal_interrupt_* tables.

	* src/hal_misc.c (exception_handler):
	Added support for decoding NMI vectors and for calling watchdog
	ISR if present.

	* src/vectors.S:
	Modified behaviour of __default_nmi_vsr to support watchdog timer
	properly.
	Fixed indirection bug in __nmi and __trap.
	Modified offsets in hal_interrupt_* tables to provide slots for
	NMI vectors at start in mn103002.

1998-08-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S, src/context.S, src/hal_misc.c, include/hal_intr.h: 
	Updated for new kernel configuration option symbol names
	
Fri Aug 28 10:09:03 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c: 
	rename __main() to cyg_hal_invoke_constructors() and remove
	initialised test

	* src/vectors.S (_start): 
	Change call of __main() to cyg_hal_invoke_constructors(), and call
	of main() to cyg_start()

1998-08-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Now pass pointer to saved registers as third argument to
	interrupt_end().

	* include/hal_arch.h:
	Added macros to support GDB.

1998-08-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h: 
	Now includes cyg_type.h rather than ktypes.h.
	
	* src/hal_misc.c:
	Added calls to turn the caches on. But disabled them
	since they interact poorly with Cygmon (Cygmon does not
	flush the caches when setting/clearing breakpoints).

Wed Aug 19 18:19:32 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (__main): 
	Add void to function prototypes to silence warnings

1998-08-18  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h: 
	* include/hal_intr.h:
	Now includes cyg_type.h rather than ktypes.h.

	* src/context.S: 
	* src/vectors.S: 
	* src/hal_misc.c:
	Now uses hal.h rather than kernel.h.

1998-08-17  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Reorgnized ifdefs to better support kernel porting.

//===========================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//===========================================================================
