# ====================================================================
#
#      redboot.cdl
#
#      Redboot package configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  gthomas
# Contributors:
# Date:           1999-11-03
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_REDBOOT {
    display  "Redboot ROM monitor"
#    include_dir   cyg/redboot
    define_header redboot.h
    description   "
           This package supports the Redboot \[stand-alone debug monitor\]
           using eCos as the underlying board support mechanism."


    # Since the CYGDAT_REDBOOT_CONSOLE_DEV setting ends up in the platform
    # HAL header, we need to include that here (via hal.h).
    define_proc {
        puts $::cdl_header "#include <pkgconf/hal.h>"
    }

    cdl_option CYGBLD_BUILD_REDBOOT {
        display "Build Redboot ROM ELF image"
        default_value 0
#        requires { CYG_HAL_STARTUP == "ROM" }
        requires CYGPKG_INFRA
        requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
        requires ! CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
        requires ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
#        requires ! CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT

        no_define
        description "This option enables the building of the Redboot ELF image.
                     The image may require further relocation or symbol
                     stripping before being converted to a binary image.
                     This is handled by a rule in the target CDL."

	compile printf.c misc_funs.c io.c ticks.c
        compile -library=libextras.a load.c

        make -priority 320 {
            <PREFIX>/bin/redboot.elf : $(PREFIX)/lib/libtarget.a main.o
                    @sh -c "mkdir -p $(dir $@)"
	            $(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ $^
        }
	make -priority 319 {
           main.o: $(REPOSITORY)/$(PACKAGE)/src/main.c $(PREFIX)/lib/libtarget.a
             $(CC) -c $(INCLUDE_PATH) $(CFLAGS) -o main.o $(REPOSITORY)/$(PACKAGE)/src/main.c
	}
    }

    cdl_component CYGPKG_REDBOOT_NETWORKING {
        display       "Build Redboot ROM binary image"
        flavor        bool
        active_if     CYGBLD_BUILD_REDBOOT
        default_value 1
	compile net/bootp.c net/udp.c net/ip.c net/pktbuf.c net/cksum.c
	compile net/enet.c net/icmp.c net/tcp.c net/timers.c net/arp.c
	compile net/tftp_client.c net/net_io.c net/inet_addr.c
        description "This option includes networking support in RedBoot."
        define_proc {
            puts $::cdl_system_header "#define CYGNUM_HAL_VIRTUAL_VECTOR_AUX_CHANNELS 1"
        }

        cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
            display          "TCP port to listen for incoming connections"
            flavor data
            default_value    9000
            description      "
               RedBoot will 'listen' on this port for incoming TCP connections.
               This allows outside connections to be made to the platform, either
               for GDB or RedBoot commands."
        }

        cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
            display          "Number of \[network\] packet buffers"
            flavor data
            default_value    4
            legal_values     2 to 8
            description      "
               RedBoot may need to buffer network data to support various connections.
               This option allows control over the number of such buffered packets,
               and in turn, controls the amount of memory used by RedBoot (which
               is not available to user applications).  Each packet buffer takes up
               about 1514 bytes.  Note: there is little need to make this larger
               than the default."
        }
    }

    cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
        display       "Allow RedBoot to use any I/O channel for it's console."
        flavor        bool
        default_value 1
        description   "
          If this option is enabled then RedBoot will attempt to use all
          defined serial I/O channels for it's console device.  Once input
          arrives at one of these channels then the console will use only
          that port."
    }

    cdl_component CYGPKG_REDBOOT_FLASH {
        display       "Allow RedBoot to support FLASH programming"
        flavor        bool
        default_value 1
        active_if     CYGPKG_IO_FLASH
        description   "
          If this option is enabled then RedBoot will provide commands
          to manage images in FLASH memory.  These images can be loaded
          into memory for execution or executed in place."
        compile -library=libextras.a flash.c

        cdl_option CYGSEM_REDBOOT_FLASH_CONFIG {
            display       "Keep RedBoot configuration data in FLASH"
            flavor        bool
            default_value 1
            description "
              When this option is enabled, RedBoot will keep configuration
              data in a separate block of FLASH memory.  This data will
              include such items as the node IP address or startup scripts."
        }
    }
}