//==========================================================================
//
//      assabet_misc.c
//
//      HAL misc board support code for StrongARM SA1110/Assabet
//
//==========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Red Hat eCos Public License
// Version 1.1 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://www.redhat.com/
//
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License. 
//
// The Original Code is eCos - Embedded Configurable Operating System,
// released September 30, 1998.
//
// The Initial Developer of the Original Code is Red Hat.
// Portions created by Red Hat are
// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.
// All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    gthomas
// Contributors: hmt
//               Travis C. Furrer <furrer@mit.edu>
// Date:         2000-05-21
// Purpose:      HAL board support
// Description:  Implementations of HAL board interfaces
//
//####DESCRIPTIONEND####
//
//========================================================================*/

#include <pkgconf/hal.h>
#include <pkgconf/system.h>
#include CYGBLD_HAL_PLATFORM_H

#include <cyg/infra/cyg_type.h>         // base types
#include <cyg/infra/cyg_trac.h>         // tracing macros
#include <cyg/infra/cyg_ass.h>          // assertion macros

#include <cyg/hal/hal_io.h>             // IO macros
#include <cyg/hal/hal_arch.h>           // Register state info
#include <cyg/hal/hal_diag.h>
#include <cyg/hal/hal_intr.h>           // Interrupt names
#include <cyg/hal/hal_cache.h>
#include <cyg/hal/hal_sa11x0.h>         // Hardware definitions
#include <cyg/hal/assabet.h>            // Platform specifics

#include <cyg/infra/diag.h>             // diag_printf

// -------------------------------------------------------------------------
// MMU initialization:
// 
// These structures are laid down in memory to define the translation
// table.
// 

/*
 * SA-1100 Translation Table Base Bit Masks */
#define ARM_TRANSLATION_TABLE_MASK               0xFFFFC000

/*
 * SA-1100 Domain Access Control Bit Masks
 */
#define ARM_ACCESS_TYPE_NO_ACCESS(domain_num)    (0x0 << (domain_num)*2)
#define ARM_ACCESS_TYPE_CLIENT(domain_num)       (0x1 << (domain_num)*2)
#define ARM_ACCESS_TYPE_MANAGER(domain_num)      (0x3 << (domain_num)*2)

struct ARM_MMU_FIRST_LEVEL_FAULT {
    int id : 2;
    int sbz : 30;
};
#define ARM_MMU_FIRST_LEVEL_FAULT_ID 0x0

struct ARM_MMU_FIRST_LEVEL_PAGE_TABLE {
    int id : 2;
    int imp : 2;
    int domain : 4;
    int sbz : 1;
    int base_address : 23;
};
#define ARM_MMU_FIRST_LEVEL_PAGE_TABLE_ID 0x1

struct ARM_MMU_FIRST_LEVEL_SECTION {
    int id : 2;
    int b : 1;
    int c : 1;
    int imp : 1;
    int domain : 4;
    int sbz0 : 1;
    int ap : 2;
    int sbz1 : 8;
    int base_address : 12;
};
#define ARM_MMU_FIRST_LEVEL_SECTION_ID 0x2

struct ARM_MMU_FIRST_LEVEL_RESERVED {
    int id : 2;
    int sbz : 30;
};
#define ARM_MMU_FIRST_LEVEL_RESERVED_ID 0x3

#define ARM_MMU_FIRST_LEVEL_DESCRIPTOR_ADDRESS(ttb_base, table_index) \
   (unsigned long *)((unsigned long)(ttb_base) + ((table_index) << 2))

#define ARM_FIRST_LEVEL_PAGE_TABLE_SIZE 0x4000

#define ARM_MMU_SECTION(ttb_base, actual_base, virtual_base,              \
                        cacheable, bufferable, perm)                      \
    CYG_MACRO_START                                                       \
        register union ARM_MMU_FIRST_LEVEL_DESCRIPTOR desc;               \
                                                                          \
        desc.word = 0;                                                    \
        desc.section.id = ARM_MMU_FIRST_LEVEL_SECTION_ID;                 \
        desc.section.domain = 0;                                          \
        desc.section.c = (cacheable);                                     \
        desc.section.b = (bufferable);                                    \
        desc.section.ap = (perm);                                         \
        desc.section.base_address = (actual_base);                        \
        *ARM_MMU_FIRST_LEVEL_DESCRIPTOR_ADDRESS(ttb_base, (virtual_base)) \
                            = desc.word;                                  \
    CYG_MACRO_END

#define X_ARM_MMU_SECTION(abase,vbase,size,cache,buff,access)      \
    { int i; int j = abase; int k = vbase;                         \
      for (i = size; i > 0 ; i--,j++,k++)                          \
      {                                                            \
        ARM_MMU_SECTION(ttb_base, j, k, cache, buff, access);      \
      }                                                            \
    }

union ARM_MMU_FIRST_LEVEL_DESCRIPTOR {
    unsigned long word;
    struct ARM_MMU_FIRST_LEVEL_FAULT fault;
    struct ARM_MMU_FIRST_LEVEL_PAGE_TABLE page_table;
    struct ARM_MMU_FIRST_LEVEL_SECTION section;
    struct ARM_MMU_FIRST_LEVEL_RESERVED reserved;
};

#define ARM_UNCACHEABLE                         0
#define ARM_CACHEABLE                           1
#define ARM_UNBUFFERABLE                        0
#define ARM_BUFFERABLE                          1

#define ARM_ACCESS_PERM_NONE_NONE               0
#define ARM_ACCESS_PERM_RO_NONE                 0
#define ARM_ACCESS_PERM_RO_RO                   0
#define ARM_ACCESS_PERM_RW_NONE                 1
#define ARM_ACCESS_PERM_RW_RO                   2
#define ARM_ACCESS_PERM_RW_RW                   3

void
hal_mmu_init(void)
{
    unsigned long ttb_base = SA11X0_RAM_BANK0_BASE + 0x4000;
    unsigned long i;

    /*
     * Set the TTB register
     */
    asm volatile ("mcr  p15,0,%0,c2,c0,0" : : "r"(ttb_base) /*:*/);

    /*
     * Set the Domain Access Control Register
     */
    i = ARM_ACCESS_TYPE_MANAGER(0)    | 
        ARM_ACCESS_TYPE_NO_ACCESS(1)  |
        ARM_ACCESS_TYPE_NO_ACCESS(2)  |
        ARM_ACCESS_TYPE_NO_ACCESS(3)  |
        ARM_ACCESS_TYPE_NO_ACCESS(4)  |
        ARM_ACCESS_TYPE_NO_ACCESS(5)  |
        ARM_ACCESS_TYPE_NO_ACCESS(6)  |
        ARM_ACCESS_TYPE_NO_ACCESS(7)  |
        ARM_ACCESS_TYPE_NO_ACCESS(8)  |
        ARM_ACCESS_TYPE_NO_ACCESS(9)  |
        ARM_ACCESS_TYPE_NO_ACCESS(10) |
        ARM_ACCESS_TYPE_NO_ACCESS(11) |
        ARM_ACCESS_TYPE_NO_ACCESS(12) |
        ARM_ACCESS_TYPE_NO_ACCESS(13) |
        ARM_ACCESS_TYPE_NO_ACCESS(14) |
        ARM_ACCESS_TYPE_NO_ACCESS(15);
    asm volatile ("mcr  p15,0,%0,c3,c0,0" : : "r"(i) /*:*/);

    /*
     * First clear all TT entries - ie Set them to Faulting
     */
    memset((void *)ttb_base, 0, ARM_FIRST_LEVEL_PAGE_TABLE_SIZE);

    /*               Actual  Virtual  Size   Attributes                                                    Function  */
    /*		     Base     Base     MB      cached?           buffered?        access permissions                 */
    /*             xxx00000  xxx00000                                                                                */
    X_ARM_MMU_SECTION(0x000,  0x500,    32,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Boot flash ROMspace */
    X_ARM_MMU_SECTION(0x080,  0x080,     4,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Application flash ROM */
    X_ARM_MMU_SECTION(0x100,  0x100,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SA-1101 Development Board Registers */
    X_ARM_MMU_SECTION(0x180,  0x180,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Ethernet Adaptor */
    X_ARM_MMU_SECTION(0x184,  0x184,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* XBusReg    */
    X_ARM_MMU_SECTION(0x188,  0x188,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SysRegA    */
    X_ARM_MMU_SECTION(0x18C,  0x18C,     1,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SysRegB    */
    X_ARM_MMU_SECTION(0x190,  0x190,     4,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* CPLD A     */
    X_ARM_MMU_SECTION(0x194,  0x194,     4,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* CPLD B     */
    X_ARM_MMU_SECTION(0x200,  0x200,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Socket A */
    X_ARM_MMU_SECTION(0x300,  0x300,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Sockets B */
    X_ARM_MMU_SECTION(0x400,  0x400,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* SA1111 Daughter card */
    X_ARM_MMU_SECTION(0x480,  0x480,   128,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Video Controller Daughter card */
    X_ARM_MMU_SECTION(0x800,  0x800, 0x400,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* StrongARM(R) Registers */
    X_ARM_MMU_SECTION(0xC00,      0,    32,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */
    X_ARM_MMU_SECTION(0xC00,  0xC00,    32,  ARM_UNCACHEABLE, ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */
    X_ARM_MMU_SECTION(0xE00,  0xE00,   128,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Zeros (Cache Clean) Bank */

}

//
// Board control register support
//   Update the board control register (write only).  Only the bits
// specified by 'mask' are changed to 'value'.
//

void
assabet_BCR(unsigned long mask, unsigned long value)
{
    _assabet_BCR = (_assabet_BCR & ~mask) | (mask & value);
    *SA1110_BOARD_CONTROL = _assabet_BCR;
}

//
// Platform specific initialization
//

void
plf_hardware_init(void)
{
    // Force "alternate" use of GPIO pins used for LCD screen
//    *SA11X0_GPIO_ALTERNATE_FUNCTION |= 0x000003FC;  // Bits 2..9
}