new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/arm/lpc2xxx/current/include/arm_lpc2xxx_ser.inl
@@ -0,0 +1,183 @@
+//==========================================================================
+//
+//      io/serial/arm/arm_lpc2xxx_ser.inl
+//
+//      ARM LPC2XXX Serial I/O definitions
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2004 eCosCentric Limited 
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):    jani 
+// Contributors: gthomas, jlarmour
+// Date:         1999-02-04
+// Purpose:      LPC2XXX Serial I/O module (interrupt driven version)
+// Description: 
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+
+#include <cyg/hal/hal_intr.h>
+
+//-----------------------------------------------------------------------------
+// Baud rate specification
+
+static unsigned int select_baud[] = {
+    9999,    // Unused
+    50,
+    75,
+    110,
+    134.5,
+    150,
+    200,
+    300,
+    600,
+    1200,
+    1800,
+    2400,
+    3600,
+    4800,
+    7200,
+    9600,
+    14400,
+    19200,
+    38400,
+    57600,
+    115200,
+    230400
+};
+
+// we need dynamically generated divider values because they depend on the 
+// value of pclk which in turn is changeable
+
+externC int cyg_var_baud_generator(int baud);
+#define CYG_IO_SERIAL_GENERIC_16X5X_BAUD_GENERATOR \
+            CYG_HAL_ARM_LPC2XXX_BAUD_GENERATOR 
+
+#ifdef CYGPKG_IO_SERIAL_ARM_LPC2XXX_SERIAL0
+static pc_serial_info lpc2xxx_serial_info0 = 
+  { CYGARC_HAL_LPC2XXX_REG_UART0_BASE,
+    CYGNUM_HAL_INTERRUPT_UART0
+  };
+
+#if CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL0_BUFSIZE > 0
+static unsigned char 
+lpc2xxx_serial_out_buf0[CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL0_BUFSIZE];
+static unsigned char 
+lpc2xxx_serial_in_buf0[CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL0_BUFSIZE];
+
+static SERIAL_CHANNEL_USING_INTERRUPTS(lpc2xxx_serial_channel0,
+                                       pc_serial_funs, 
+                                       lpc2xxx_serial_info0,
+                                       CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL0_BAUD),
+                                       CYG_SERIAL_STOP_DEFAULT,
+                                       CYG_SERIAL_PARITY_DEFAULT,
+                                       CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                                       CYG_SERIAL_FLAGS_DEFAULT,
+                                       &lpc2xxx_serial_out_buf0[0], 
+                                       sizeof(lpc2xxx_serial_out_buf0),
+                                       &lpc2xxx_serial_in_buf0[0], 
+                                       sizeof(lpc2xxx_serial_in_buf0)
+    );
+#else
+static SERIAL_CHANNEL(lpc2xxx_serial_channel0,
+                      pc_serial_funs, 
+                      lpc2xxx_serial_info0,
+                      CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL0_BAUD),
+                      CYG_SERIAL_STOP_DEFAULT,
+                      CYG_SERIAL_PARITY_DEFAULT,
+                      CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                      CYG_SERIAL_FLAGS_DEFAULT
+    );
+#endif
+
+DEVTAB_ENTRY(lpc2xxx_serial_io0, 
+             CYGDAT_IO_SERIAL_ARM_LPC2XXX_SERIAL0_NAME,
+             0,                     // Does not depend on a lower
+                                    // level interface
+             &cyg_io_serial_devio, 
+             pc_serial_init, 
+             pc_serial_lookup,     // Serial driver may need initializing
+             &lpc2xxx_serial_channel0
+    );
+#endif //  CYGPKG_IO_SERIAL_ARM_LPC2XXX_SERIAL0
+
+#ifdef CYGPKG_IO_SERIAL_ARM_LPC2XXX_SERIAL1
+static pc_serial_info lpc2xxx_serial_info1 = 
+  { CYGARC_HAL_LPC2XXX_REG_UART1_BASE,
+    CYGNUM_HAL_INTERRUPT_UART1
+  };
+#if CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL1_BUFSIZE > 0
+static unsigned char 
+lpc2xxx_serial_out_buf1[CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL1_BUFSIZE];
+static unsigned char 
+lpc2xxx_serial_in_buf1[CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL1_BUFSIZE];
+
+static SERIAL_CHANNEL_USING_INTERRUPTS(lpc2xxx_serial_channel1,
+                                       pc_serial_funs, 
+                                       lpc2xxx_serial_info1,
+                                       CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL1_BAUD),
+                                       CYG_SERIAL_STOP_DEFAULT,
+                                       CYG_SERIAL_PARITY_DEFAULT,
+                                       CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                                       CYG_SERIAL_FLAGS_DEFAULT,
+                                       &lpc2xxx_serial_out_buf1[0], 
+                                       sizeof(lpc2xxx_serial_out_buf1),
+                                       &lpc2xxx_serial_in_buf1[0], 
+                                       sizeof(lpc2xxx_serial_in_buf1)
+    );
+#else
+static SERIAL_CHANNEL(lpc2xxx_serial_channel1,
+                      pc_serial_funs, 
+                      lpc2xxx_serial_info1,
+                      CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_ARM_LPC2XXX_SERIAL1_BAUD),
+                      CYG_SERIAL_STOP_DEFAULT,
+                      CYG_SERIAL_PARITY_DEFAULT,
+                      CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                      CYG_SERIAL_FLAGS_DEFAULT
+    );
+#endif
+
+DEVTAB_ENTRY(lpc2xxx_serial_io1, 
+             CYGDAT_IO_SERIAL_ARM_LPC2XXX_SERIAL1_NAME,
+             0,                     // Does not depend on a lower
+                                    // level interface
+             &cyg_io_serial_devio, 
+             pc_serial_init, 
+             pc_serial_lookup,     // Serial driver may need initializing
+             &lpc2xxx_serial_channel1
+    );
+#endif //  CYGPKG_IO_SERIAL_ARM_LPC2XXX_SERIAL1
+
+// EOF arm_lpc2xxx_ser.inl