new file mode 100644
--- /dev/null
+++ b/packages/services/gfx/mw/current/src/rtems/net_cfg.h
@@ -0,0 +1,121 @@
+/***************************************************************************
+ *
+ * $Header: /usr/cvs/microwin/src/rtems/net_cfg.h,v 1.1.1.1 2001/06/21 06:32:42 greg Exp $
+ *
+ * MODULE DESCRIPTION: This module specializes the RTEMS Network configuration 
+ *                     for the omniORB examples. It could be used as a starting
+ *                     point of an application using omniORB and RTEMS.
+ *
+ * This file was based on "networkconfig.h" that comes with the netdemos
+ * examples that ships with the RTEMS distribution.
+ *
+ * NOTE: This file must be modified to match your environment.
+ *
+ * by: Rosimildo da Silva:
+ *     rdasilva@connecttel.com
+ *     http://www.connecttel.com
+ *
+ * MODIFICATION/HISTORY:
+ *
+ * $Log: net_cfg.h,v $
+ * Revision 1.1.1.1  2001/06/21 06:32:42  greg
+ * Microwindows pre8 with patches
+ *
+ * Revision 1.1.1.1  2001/06/05 03:44:03  root
+ * First import of 5/5/2001 Microwindows to CVS
+ *
+ ****************************************************************************/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+#define RTEMS_USE_BOOTP
+*/
+
+#include <stdio.h>
+#include <rtems/rtems_bsdnet.h>
+
+/*
+ * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the
+ * Ethernet address here.  If RTEMS_SET_ETHERNET_ADDRESS is not
+ * defined the driver will choose an address.
+ */
+#define RTEMS_SET_ETHERNET_ADDRESS
+#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
+static char ethernet_address[6] = { 0x20, 0x00, 0x27, 0xAF, 0x03, 0x51 };
+#endif
+
+#undef  RTEMS_BSP_NETWORK_DRIVER_NAME
+#define RTEMS_BSP_NETWORK_DRIVER_NAME  "ep0"
+
+extern int rtems_3c509_driver_attach( struct rtems_bsdnet_ifconfig *config );
+#undef  RTEMS_BSP_NETWORK_DRIVER_ATTACH
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_3c509_driver_attach
+
+/*
+ * Default network interface
+ */
+static struct rtems_bsdnet_ifconfig netdriver_config = 
+{
+   RTEMS_BSP_NETWORK_DRIVER_NAME,      /* name */
+	RTEMS_BSP_NETWORK_DRIVER_ATTACH,    /* attach function */
+
+	NULL,				/* link to next interface */
+
+#if (defined (RTEMS_USE_BOOTP))
+	NULL,				/* BOOTP supplies IP address */
+	NULL,				/* BOOTP supplies IP net mask */
+#else
+	"192.168.0.11",		/* IP address */
+	"255.255.255.0",		/* IP net mask */
+#endif /* !RTEMS_USE_BOOTP */
+
+#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
+	ethernet_address,               /* Ethernet hardware address */
+#else
+	NULL,           /* Driver supplies hardware address */
+#endif
+	0				/* Use default driver parameters */
+};
+
+/*
+ * Network configuration
+ */
+struct rtems_bsdnet_config rtems_bsdnet_config = {
+	&netdriver_config,
+
+#if (defined (RTEMS_USE_BOOTP))
+	rtems_bsdnet_do_bootp,
+#else
+	NULL,
+#endif
+
+	0,			/* Default network task priority */
+	0,			/* Default mbuf capacity */
+	0,			/* Default mbuf cluster capacity */
+
+#if (!defined (RTEMS_USE_BOOTP))
+	"lucila",			/* Host name */
+	"rps.com",			/* Domain name */
+	"192.168.0.1",	/* Gateway */
+	"192.168.0.1",	/* Log host */
+	{"192.168.0.1" },	/* Name server(s) */
+#endif /* !RTEMS_USE_BOOTP */
+
+};
+
+/*
+ * For TFTP test application
+ */
+#if (!defined (RTEMS_USE_BOOTP))
+#define RTEMS_TFTP_TEST_HOST_NAME "192.168.0.2"
+#define RTEMS_TFTP_TEST_FILE_NAME "root/boot.bt"
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+ 
+/* end of include file */