# ====================================================================
#
#      hal_sh_edk7708.cdl
#
#      EDK7708 board HAL package configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  jskov
# Contributors:
# Date:           1999-10-29
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_SH_EDK7708 {
    display       "Hitachi EDK/SH7708 board"
    parent        CYGPKG_HAL_SH
    define_header hal_sh_edk7708.h
    include_dir   cyg/hal
    description   "
        The edk HAL package provides the support needed to run
        eCos on a Hitachi SH3 EDK7708 board."

    compile       hal_diag.c plf_misc.c

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_sh.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_sh_edk7708.h>"

        puts $::cdl_header "#define CYGNUM_HAL_SH_SH3_SCI_PORTS 1"
        puts $::cdl_header "#define CYGHWR_HAL_VSR_TABLE 0x08000000"
        puts $::cdl_header "#define CYGHWR_HAL_VECTOR_TABLE 0x08000100"
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        legal_values  {"RAM" "ROM" "ROMRAM"}
        default_value {"RAM"}
	no_define
	define -file system.h CYG_HAL_STARTUP
        description   "
           When targetting the EDK7708 board it is possible to build
           the system for either RAM bootstrap or ROM bootstrap.
           RAM bootstrap generally requires that the board
           is equipped with ROMs containing a suitable ROM monitor or
           equivalent software that allows GDB to download the eCos
           application on to the board. The ROM bootstrap typically
           requires that the eCos application be blown into EPROMs or
           equivalent technology.  ROMRAM bootstrap is similar to ROM
           bootstrap, but everything is copied to RAM before execution 
           starts thus improving performace, but at the cost of an
           increased RAM footprint."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   1
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
           The EDK/7708 board has only one serial port. This option
           chooses which port will be used to connect to a host
           running GDB."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
        display          "Diagnostic serial port"
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
           The EDK/7708 board has only one serial port.  This option
           chooses which port will be used for diagnostic output."
    }

    cdl_option CYGHWR_HAL_SH_BOARD_SPEED {
        display          "Development board clock speed (MHz)"
        flavor           data
        calculated       15
        description      "
           The EDK/7708 board uses a 15MHz crystal."
   }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            Using TMU counter 0, clocked at p/4, with peripheral clock
            sourced directly from the 15MHz crystal (which is the
            default setup on the EDK).  This means 150000/4
            oscillations in 1/100 second."
        flavor        none
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            calculated    1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            calculated    100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            calculated    { CYGHWR_HAL_SH_BOARD_SPEED*1000000/CYGNUM_HAL_RTC_DENOMINATOR/4 }
        }
    }

    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        parent  CYGPKG_NONE
        description   "
	    Global build options including control over
	    compiler flags, linker flags and choice of toolchain."


        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
            display "Global command prefix"
            flavor  data
            no_define
            default_value { "sh-elf" }
            description "
                This option specifies the command prefix used when
                invoking the build tools."
        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {
            display "Global compiler flags"
            flavor  data
            no_define
              default_value { CYGHWR_HAL_SH_BIGENDIAN ? "-mb -m3 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" : "-ml -m3 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
            description   "
                This option controls the global compiler flags which
                are used to compile all packages by
                default. Individual packages may define
                options which override these global flags."
        }

        cdl_option CYGBLD_GLOBAL_LDFLAGS {
            display "Global linker flags"
            flavor  data
            no_define
            default_value { CYGHWR_HAL_SH_BIGENDIAN ? "-mb -m3 -nostdlib -Wl,--gc-sections -Wl,-static" : "-ml -m3 -nostdlib -Wl,--gc-sections -Wl,-static" }
            description   "
                This option controls the global linker flags. Individual
                packages may define options which override these global flags."
        }

        cdl_option CYGBLD_BUILD_GDB_STUBS {
            display "Build GDB stub ROM image"
            default_value 0
            requires { CYG_HAL_STARTUP == "ROM" }
            requires CYGSEM_HAL_ROM_MONITOR
            requires CYGBLD_BUILD_COMMON_GDB_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
            requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
            requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
            requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
            no_define
            description "
                This option enables the building of the GDB stubs for the
                board. The common HAL controls takes care of most of the
                build process, but the final conversion from ELF image to
                binary data is handled by the platform CDL, allowing
                relocation of the data if necessary."

            make -priority 320 {
                <PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
                $(OBJCOPY) -O binary $< $@
            }
        }
    }

    cdl_component CYGHWR_MEMORY_LAYOUT {
        display "Memory layout"
        flavor data
        no_define
        calculated { CYG_HAL_STARTUP == "RAM" ? "sh_edk7708_ram" : \
                     CYG_HAL_STARTUP == "ROM" ? "sh_edk7708_rom" : \
                                                "sh_edk7708_romram" }

        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
            display "Memory layout linker script fragment"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_sh_edk7708_ram.ldi>" : \
                         CYG_HAL_STARTUP == "ROM" ? "<pkgconf/mlt_sh_edk7708_rom.ldi>" : \
                                                    "<pkgconf/mlt_sh_edk7708_romram.ldi>" }
        }

        cdl_option CYGHWR_MEMORY_LAYOUT_H {
            display "Memory layout header file"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_H
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_sh_edk7708_ram.h>" : \
                         CYG_HAL_STARTUP == "ROM" ? "<pkgconf/mlt_sh_edk7708_rom.h>" : \
                                                    "<pkgconf/mlt_sh_edk7708_romram.h>" }
        }
    }

    cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
        display       "Work with a ROM monitor"
        flavor        booldata
        legal_values  { "GDB_stubs" }
        default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }
        requires      { CYG_HAL_STARTUP == "RAM" }
        parent        CYGPKG_HAL_ROM_MONITOR
        description   "
            Support can be enabled for boot ROMs or ROM monitors which contain
            GDB stubs. This support changes various eCos semantics such as
            the encoding of diagnostic output, and the overriding of hardware
            interrupt vectors."
    }

    cdl_option CYGSEM_HAL_ROM_MONITOR {
        display       "Behave as a ROM monitor"
        flavor        bool
        default_value 0
        parent        CYGPKG_HAL_ROM_MONITOR
        requires      { CYG_HAL_STARTUP == "ROM" }
        description   "
            Enable this option if this program is to be used as a ROM monitor,
            i.e. applications will be loaded into RAM on the board, and this
            ROM monitor may process exceptions or interrupts generated from the
            application. This enables features such as utilizing a separate
            interrupt stack when exceptions are generated."
    }
}