# ====================================================================
#
#	ebsa285_eth_drivers.cdl
#
#	Ethernet drivers
#	Intel EBSA285 and PRO/100+ platform specific support
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      hmt
# Original data:  hmt
# Contributors:	  gthomas
# Date:           2000-02-01
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_DEVS_ETH_ARM_EBSA285 {
    display       "Intel EBSA285 with PRO/100+ ethernet driver"

    parent        CYGPKG_IO_ETH_DRIVERS
    active_if     CYGPKG_IO_ETH_DRIVERS
    active_if     CYGPKG_HAL_ARM_EBSA285

    include_dir   cyg/io

    # FIXME: This really belongs in the INTEL_I82559 package
    cdl_interface CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
        display   "Intel i82559 ethernet driver required"
    }

    define_proc {
        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_INL <cyg/io/devs_eth_ebsa285.inl>"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_CFG <pkgconf/devs_eth_arm_ebsa285.h>"
        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
    }

    cdl_component CYGPKG_DEVS_ETH_ARM_EBSA285_ETH0 {
        display       "EBSA-285 ethernet port 0 driver"
        flavor        bool
        default_value 1
        description   "
            This option includes the ethernet device driver for the
            PCI ethernet network devices."

        implements CYGHWR_NET_DRIVERS
        implements CYGHWR_NET_DRIVER_ETH0
        implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_ARM_EBSA285_ETH0_NAME {
            display       "Device name for the ethernet port 0 driver"
            flavor        data
            default_value {"\"eth0\""}
            description   "
                This option sets the name of the ethernet device for the
                first PCI ethernet card."
        }

        cdl_component CYGSEM_DEVS_ETH_ARM_EBSA285_ETH0_SET_ESA {
            display       "Set the ethernet station address"
            flavor        bool
	    default_value 0
            description   "Enabling this option will allow the ethernet
            station address to be forced to the value set by the
            configuration.  This may be required if the hardware does
            not include a serial EEPROM for the ESA."
            
            cdl_option CYGDAT_DEVS_ETH_ARM_EBSA285_ETH0_ESA {
                display       "The ethernet station address"
                flavor        data
                default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x11}"}
                description   "The ethernet station address"
            }
        }
    }

    cdl_component CYGPKG_DEVS_ETH_ARM_EBSA285_ETH1 {
        display       "EBSA-285 ethernet port 1 driver"
        flavor        bool
        default_value 1
        description   "
            This option includes the ethernet device driver for the
            nanoBridge port 1 - that is the connector on the corner of
            the board, far from the reset switch."

        implements CYGHWR_NET_DRIVERS
        implements CYGHWR_NET_DRIVER_ETH1
        implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_ARM_EBSA285_ETH1_NAME {
            display       "Device name for the ethernet port 1 driver"
            flavor        data
            default_value {"\"eth1\""}
            description   "
                This option sets the name of the ethernet device for the
                second PCI ethernet card."
        }

        cdl_component CYGSEM_DEVS_ETH_ARM_EBSA285_ETH1_SET_ESA {
            display       "Set the ethernet station address"
            flavor        bool
	    default_value 0
            description   "Enabling this option will allow the ethernet
            station address to be forced to the value set by the
            configuration.  This may be required if the hardware does
            not include a serial EEPROM for the ESA."
            
            cdl_option CYGDAT_DEVS_ETH_ARM_EBSA285_ETH1_ESA {
                display       "The ethernet station address"
                flavor        data
                default_value {"{0x00, 0xB5, 0xE0, 0xB5, 0xE0, 0x12}"}
                description   "The ethernet station address"
            }
        }
    }
}

# EOF ebsa285_eth_drivers.cdl