# ====================================================================
#
#      ser_arm_ebsa285.cdl
#
#      eCos serial ARM/EBSA285 configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      hmt
# Original data:  gthomas
# Contributors:   jskov
# Date:           2000-04-04
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_IO_SERIAL_ARM_EBSA285 {
    display       "Intel StrongARM/EBSA285 serial device drivers"

    parent        CYGPKG_IO_SERIAL_DEVICES
    active_if     CYGPKG_IO_SERIAL
    active_if     CYGPKG_HAL_ARM_EBSA285

    requires      CYGPKG_ERROR
    include_dir   cyg/io
    include_files ; # none _exported_ whatsoever
    description   "
           This option enables the serial device drivers for the
           StrongARM/EBSA285."
    doc           redirect/ecos-device-drivers.html

    compile       -library=libextras.a   ebsa285_serial.c

    define_proc {
        puts $::cdl_system_header "/***** serial driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_arm_ebsa285.h>"
        puts $::cdl_system_header "/*****  serial driver proc output end  *****/"
    }

    cdl_component CYGPKG_IO_SERIAL_ARM_EBSA285_SERIAL {
	display   "Intel StrongARM/EBSA285 serial driver"
	flavor    bool
	default_value 1
	description "
	    The serial device driver for the Intel StrongARM/EBSA285.
	    There is only one serial device on this board."

	cdl_option CYGDAT_IO_SERIAL_ARM_EBSA285_SERIAL_NAME {
	    display       "Device name for the Intel StrongARM/EBSA285 serial port"
	    flavor        data
	    default_value {"\"/dev/ser1\""}
	    description   "
	    This option specifies the name of serial device for the 
	    Intel StrongARM/EBSA285 serial port."
	}
	
	cdl_option CYGNUM_IO_SERIAL_ARM_EBSA285_SERIAL_BAUD {
	    display       "Baud rate for the Intel StrongARM/EBSA285 serial port"
	    flavor        data
	    legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 \
		    4800 7200 9600 14400 19200 38400 57600 115200 234000 }
	    default_value 38400
	    description   "
	    This option specifies the default baud rate (speed) for the
	    Intel StrongARM/EBSA285 serial port."
	}

	cdl_option CYGNUM_IO_SERIAL_ARM_EBSA285_SERIAL_BUFSIZE {
	    display       "Buffer size for the Intel StrongARM/EBSA285 serial driver"
	    flavor        data
	    default_value 128
	    legal_values  0 to 8192
	    description   "
	    This option specifies the size of the internal buffers used 
	    for the Intel StrongARM/EBSA285 serial port."
	}
    }

    cdl_component CYGPKG_IO_SERIAL_ARM_EBSA285_OPTIONS {
        display "Serial device driver build options"
        flavor  none
        description   "
	    Package specific build options including control over
	    compiler flags used only in building this package,
	    and details of which tests are built."


        cdl_option CYGPKG_IO_SERIAL_ARM_EBSA285_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building these serial device drivers. These flags are used in addition
                to the set of global flags."
        }

        cdl_option CYGPKG_IO_SERIAL_ARM_EBSA285_CFLAGS_REMOVE {
            display "Suppressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building these serial device drivers. These flags are removed from
                the set of global flags if present."
        }
    }
}

# EOF ser_arm_ebsa285.cdl