#ifndef CYGONCE_HAL_CACHE_H #define CYGONCE_HAL_CACHE_H //============================================================================= // // hal_cache.h // // HAL cache control API // //============================================================================= //####COPYRIGHTBEGIN#### // // ------------------------------------------- // The contents of this file are subject to the Red Hat eCos Public License // Version 1.1 (the "License"); you may not use this file except in // compliance with the License. You may obtain a copy of the License at // http://www.redhat.com/ // // Software distributed under the License is distributed on an "AS IS" // basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the // License for the specific language governing rights and limitations under // the License. // // The Original Code is eCos - Embedded Configurable Operating System, // released September 30, 1998. // // The Initial Developer of the Original Code is Red Hat. // Portions created by Red Hat are // Copyright (C) 1998, 1999, 2000 Red Hat, Inc. // All Rights Reserved. // ------------------------------------------- // //####COPYRIGHTEND#### //============================================================================= //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors:nickg, jskov, hmt // Date: 1998-02-17 // Purpose: Cache control API // Description: The macros defined here provide the HAL APIs for handling // cache control operations. // Usage: // #include // ... // // //####DESCRIPTIONEND#### // //============================================================================= #include #include #include #include //============================================================================= // Memory mapping typedef struct { CYG_ADDRESS virtual_addr; CYG_ADDRESS physical_addr; cyg_int32 size; cyg_uint8 flags; } cyg_memdesc_t; // each platform HAL must provide one of these to describe how memory // should be mapped/cached, ideally weak aliased so that apps can override: externC cyg_memdesc_t cyg_hal_mem_map[]; #define CYGARC_MEMDESC_CI 1 // cache inhibit #define CYGARC_MEMDESC_GUARDED 2 // guarded // these macros should ease that task, and ease any future extension of the // structure (physical == virtual addresses): #define CYGARC_MEMDESC_CACHE( _va_, _sz_ ) \ { (_va_), (_va_), (_sz_), 0 } #define CYGARC_MEMDESC_NOCACHE( _va_, _sz_ ) \ { (_va_), (_va_), (_sz_), CYGARC_MEMDESC_CI } #define CYGARC_MEMDESC_CACHEGUARD( _va_, _sz_ ) \ { (_va_), (_va_), (_sz_), CYGARC_MEMDESC_GUARDED } #define CYGARC_MEMDESC_NOCACHEGUARD( _va_, _sz_ ) \ { (_va_), (_va_), (_sz_), CYGARC_MEMDESC_GUARDED|CYGARC_MEMDESC_CI } #define CYGARC_MEMDESC_TABLE_END {0, 0, 0, 0} #define CYGARC_MEMDESC_TABLE cyg_memdesc_t cyg_hal_mem_map[] #define CYGARC_MEMDESC_EMPTY_TABLE { CYGARC_MEMDESC_TABLE_END } //============================================================================= // PowerPC simulator #ifdef CYGPKG_HAL_POWERPC_SIM //----------------------------------------------------------------------------- // Cache dimensions // Data cache #define HAL_DCACHE_SIZE 4096 // Size of data cache in bytes #define HAL_DCACHE_LINE_SIZE 16 // Size of a data cache line #define HAL_DCACHE_WAYS 2 // Associativity of the cache // Instruction cache #define HAL_ICACHE_SIZE 4096 // Size of cache in bytes #define HAL_ICACHE_LINE_SIZE 16 // Size of a cache line #define HAL_ICACHE_WAYS 2 // Associativity of the cache #define HAL_DCACHE_SETS (HAL_DCACHE_SIZE/(HAL_DCACHE_LINE_SIZE*HAL_DCACHE_WAYS)) #define HAL_ICACHE_SETS (HAL_ICACHE_SIZE/(HAL_ICACHE_LINE_SIZE*HAL_ICACHE_WAYS)) //----------------------------------------------------------------------------- // Global control of data cache // Enable the data cache #define HAL_DCACHE_ENABLE() // Disable the data cache #define HAL_DCACHE_DISABLE() // Invalidate the entire cache #define HAL_DCACHE_INVALIDATE_ALL() // Synchronize the contents of the cache with memory. #define HAL_DCACHE_SYNC() // Query the state of the data cache #define HAL_DCACHE_IS_ENABLED(_state_) \ CYG_MACRO_START \ (_state_) = 0; \ CYG_MACRO_END // Set the data cache refill burst size //#define HAL_DCACHE_BURST_SIZE(_size_) // Set the data cache write mode //#define HAL_DCACHE_WRITE_MODE( _mode_ ) //#define HAL_DCACHE_WRITETHRU_MODE 0 //#define HAL_DCACHE_WRITEBACK_MODE 1 // Load the contents of the given address range into the data cache // and then lock the cache so that it stays there. //#define HAL_DCACHE_LOCK(_base_, _size_) // Undo a previous lock operation //#define HAL_DCACHE_UNLOCK(_base_, _size_) // Unlock entire cache //#define HAL_DCACHE_UNLOCK_ALL() //----------------------------------------------------------------------------- // Data cache line control // Allocate cache lines for the given address range without reading its // contents from memory. //#define HAL_DCACHE_ALLOCATE( _base_ , _size_ ) // Write dirty cache lines to memory and invalidate the cache entries // for the given address range. //#define HAL_DCACHE_FLUSH( _base_ , _size_ ) // Invalidate cache lines in the given range without writing to memory. //#define HAL_DCACHE_INVALIDATE( _base_ , _size_ ) // Write dirty cache lines to memory for the given address range. //#define HAL_DCACHE_STORE( _base_ , _size_ ) // Preread the given range into the cache with the intention of reading // from it later. //#define HAL_DCACHE_READ_HINT( _base_ , _size_ ) // Preread the given range into the cache with the intention of writing // to it later. //#define HAL_DCACHE_WRITE_HINT( _base_ , _size_ ) // Allocate and zero the cache lines associated with the given range. //#define HAL_DCACHE_ZERO( _base_ , _size_ ) //----------------------------------------------------------------------------- // Global control of Instruction cache // Enable the instruction cache #define HAL_ICACHE_ENABLE() // Disable the instruction cache #define HAL_ICACHE_DISABLE() // Invalidate the entire cache #define HAL_ICACHE_INVALIDATE_ALL() // Synchronize the contents of the cache with memory. #define HAL_ICACHE_SYNC() // Query the state of the instruction cache #define HAL_ICACHE_IS_ENABLED(_state_) \ CYG_MACRO_START \ (_state_) = 0; \ CYG_MACRO_END // Set the instruction cache refill burst size //#define HAL_ICACHE_BURST_SIZE(_size_) // Load the contents of the given address range into the instruction cache // and then lock the cache so that it stays there. //#define HAL_ICACHE_LOCK(_base_, _size_) // Undo a previous lock operation //#define HAL_ICACHE_UNLOCK(_base_, _size_) // Unlock entire cache //#define HAL_ICACHE_UNLOCK_ALL() //----------------------------------------------------------------------------- // Instruction cache line control // Invalidate cache lines in the given range without writing to memory. //#define HAL_ICACHE_INVALIDATE( _base_ , _size_ ) #endif //----------------------------------------------------------------------------- #endif // ifndef CYGONCE_HAL_CACHE_H // End of hal_cache.h