Mercurial > ecos
annotate README.host @ 1017:f1aa765500df
Update ChangeLog for redboot_installing.sgml, which was accidentally
checked in without a ChangeLog entry.
| author | nickg |
|---|---|
| date | Tue, 13 May 2003 18:42:02 +0000 |
| parents | c2d1fd823f09 |
| children | 8f5c64d663f7 |
| rev | line source |
|---|---|
| 290 | 1 eCos Host-side Software |
| 2 ======================= | |
| 3 | |
| 4 This README file only describes the eCos host-side software. For | |
| 5 details of the eCos target-side software or the required toolchains, | |
| 6 please see other documentation. A good starting point is | |
| 7 http://sources.redhat.com/ecos | |
| 8 | |
| 9 There are two categories of host-side software. The host subdirectory | |
| 10 contains generic software, primarily related to the eCos configuration | |
| 11 technology. All eCos users will need to use some of this technology to | |
| 12 configure and build eCos, either using pre-built binaries or by | |
| 13 building the host-side software from source. The generic software | |
| 14 should be portable to a wide range of host platforms. | |
| 15 | |
| 16 There is also package-specific host-side software. Much of this is I/O | |
| 17 related. For example the generic USB-slave package contains some | |
| 18 programs related to testing; a test application is run on a target | |
| 19 with suitable USB slave-side hardware, and needs to interact with | |
| 20 another program running on the USB host; the latter is | |
| 21 package-specific host-side software and can be found in the | |
| 22 subdirectory packages/io/usb/slave. Code like this may have | |
| 23 significant platform dependencies and may only work on a single | |
| 24 platform or on a small number of platforms. There may also be | |
| 25 special requirements, for example it may be necessary to install some | |
| 26 programs suid root so that they have appropriate access to the | |
| 27 hardware. | |
| 28 | |
| 29 | |
| 30 The host subdirectory includes the following: | |
| 31 | |
| 32 infra/ | |
| 33 This is an implementation of the eCos infrastructure that can be | |
| 34 used on the host-side, and provides assertion, tracing and | |
| 35 testcase support. | |
| 36 | |
| 37 NOTE: the eCos infrastructure facilities are not especially | |
| 38 well-suited to host-side development, in particular they are not | |
| 39 C++-oriented. There are plans to remove the current infrastructure | |
| 40 completely and replace it with something more suitable. People | |
| 41 planning new projects should be aware of this, and may wish to | |
| 42 avoid using the current infrastructure. | |
| 43 | |
| 44 libcdl/ | |
| 45 The CDL library lies at the heart of the eCos configuration | |
| 46 technology. | |
| 47 | |
| 48 tools/configtool/ | |
| 49 The sources to the various configuration tools can be found here. | |
| 50 | |
| 51 tools/configtool/common/common/ | |
| 52 Contains sources related to makefile generation, shared by the | |
| 53 command line and graphical tools. | |
| 54 | |
| 55 tools/configtool/standalone/common/ | |
| 56 Contains the command line ecosconfig tool. | |
| 57 | |
| 58 tools/configtool/standalone/wxwin/ | |
| 59 Contains sources for the wxWindows-based, Linux and Windows graphical | |
| 60 configuration tool. The Windows version can currently only be | |
| 61 built with Visual C++, not with cygwin g++. | |
| 62 | |
| 63 tools/configtool/common/win32/ | |
| 64 tools/configtool/standalone/win32/ | |
| 65 Contains sources for the older, MFC-based, Windows-only graphical | |
| 66 configuration tool. Again this can currently only be built with | |
| 67 Visual C++. | |
| 68 | |
| 69 The two graphical configuration tools have their own build procedures, | |
| 70 described in tools/configtool/standalone/wxwin/ReadMe and | |
| 71 tools/configtool/standalone/win32/ReadMe respectively. | |
| 72 | |
| 73 Package-specific host-side code lives in the host subdirectory of the | |
| 74 appropriate package, for example packages/io/usb/slave/<version>/host. | |
| 75 Most packages only provide target-side code and hence will not have a | |
| 76 host subdirectory. Users can install various packages from a variety | |
| 77 of sources, and where a package does have host-side software the | |
| 78 package documentation should be consulted for further information. | |
| 79 | |
| 80 | |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
81 Installing on Linux, Other Unix Systems, and Cygwin |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
82 --------------------------------------------------- |
| 290 | 83 |
| 84 Both generic host-side software (infra, libcdl and ecosconfig) and | |
| 85 package-specific software can be built with the conventional | |
| 86 "configure/make/make install" sequence. However the code does not | |
| 87 conform fully to GNU coding standards so some operations such as "make | |
| 88 dist" are not supported. There is limited support for DejaGnu-based | |
| 89 testing. | |
| 90 | |
| 91 Much of the host-side software has a dependency on Tcl. This is not | |
| 92 supplied with the sources since many users will already have a | |
|
345
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
93 suitable installation, for example it is shipped as standard with all |
|
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
94 major Linux distributions. The generic host-side software should work |
|
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
95 with any release of Tcl from 8.0 onwards. The package-specific |
|
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
96 software requires a more recent version, 8.3 or later. If no suitable |
|
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
97 Tcl installation is available then the configure step will still |
|
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
98 succeed but some of the package-specific software will not be built. |
| 290 | 99 |
| 100 There are two main approaches to building the host-side software: | |
| 101 | |
| 102 1) build the generic and the package-specific code in one build tree. | |
| 103 This uses the top-level configure script. The script automatically | |
| 104 invokes the configure script in the main host subdirectory. In | |
| 105 addition it searches the packages hierarchy for host subdirectories | |
| 106 containing their own configure scripts and will invoke those. | |
| 107 | |
| 108 Note: the search for host subdirectories happens during configure | |
| 109 time, not during the make. If new packages with host-side code are | |
| 110 added to the repository then it will be necessary to re-run the | |
| 111 toplevel configure script. | |
| 112 | |
| 113 2) build the generic code in one build tree, using the configure | |
| 114 script in the toplevel's host subdirectory. Then build some or all | |
| 115 of the package-specific code in separate build trees, using the | |
| 116 configure scripts in each package's host subdirectory. | |
| 117 | |
| 118 The first approach is generally simpler. However some of the | |
| 119 package-specific code requires special installation, for example a | |
| 120 program may have to be installed suid root so that it has the right | |
| 121 privileges to access hardware, and hence the "make install" step has | |
| 122 to be run by the superuser. Also some of the package-specific code is | |
| 123 rather specialized and may be of no interest to many users. For | |
| 124 example, the USB testing code is only useful when developing | |
| 125 USB-based applications. Hence some users may prefer the second | |
| 126 approach, building just the generic code and a subset of the | |
| 127 package-specific code. | |
| 128 | |
| 129 It is necessary to use a separate build tree rather than build | |
| 130 directly in the source tree. This is enforced by the configure scripts. | |
| 131 | |
| 132 $ mkdir build | |
| 133 $ cd build | |
| 134 | |
| 135 The next step is to run the desired configure script. To build all | |
| 136 the host-side software this means the toplevel configure script: | |
| 137 | |
| 138 $ <path>/configure <args> | |
| 139 | |
| 140 Alternatively to build just the generic host-side software, use the | |
| 141 configure script in the host subdirectory. | |
| 142 | |
| 143 $ mkdir host | |
| 144 $ cd host | |
| 145 $ <path>/host/configure <args> | |
| 146 | |
| 147 Or, to build just one package's host-side code: | |
| 148 | |
| 149 $ mkdir -p packages/io/usb/slave/current/host | |
| 150 $ cd packages/io/usb/slave/current/host | |
| 151 $ <path>/packages/io/usb/slave/current/host/configure <args> | |
| 152 | |
| 153 (It is not actually necessary to use the same directory structure in | |
| 154 the build tree as in the source tree, but doing so can avoid | |
| 155 confusion). | |
| 156 | |
| 157 A list of all the command-line options can be obtained by running | |
| 158 "configure --help". The most important ones are as follows: | |
| 159 | |
| 160 1) --prefix. This can be used to specify the location of the install | |
| 161 tree, defaulting to /usr/local, so the ecosconfig program ends up | |
| 162 in /usr/local/bin/ecosconfig and the CDL library ends up in | |
| 163 /usr/local/lib/libcdl.a. If an alternative location is preferred | |
| 164 this can be specified with --prefix, for example: | |
| 165 | |
| 166 $ <path>/configure --prefix=/usr/local/ecos <args> | |
| 167 | |
| 168 2) --enable-debug. By default all assertions and tracing are disabled. | |
| 169 When debugging any of the generic host-side software these should | |
| 170 be enabled. Some package-specific code may not have any extra | |
| 171 debug support, in which case --enable-debug would be ignored. | |
| 172 | |
| 173 $ <path>/configure --enable-debug | |
| 174 | |
| 175 It is also possible to control most of the assertion and tracing | |
| 176 macros at a finer grain. This is intended mainly for use by the | |
| 177 developers. | |
| 178 | |
| 179 --disable-asserts disable all assertions | |
| 180 --disable-preconditions disable a subset of the assertions | |
| 181 --disable-postconditions disable a subset of the assertions | |
| 182 --disable-invariants disable a subset of the assertions | |
| 183 --disable-loopinvariants disable a subset of the assertions | |
| 184 --disable-tracing disable tracing | |
| 185 --disable-fntracing disable function entry/exit tracing | |
| 186 | |
| 187 3) --with-tcl=<path> | |
| 188 --with-tcl-version=<number> | |
| 189 | |
| 190 The host-side tools have a dependency on Tcl, which is not supplied | |
| 191 with the sources because many people will already have a suitable | |
| 192 installation. Specifically it is necessary to have the header file | |
| 193 tcl.h and appropriate libraries such that -ltcl will work - this | |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
194 can involve either static or shared libraries. Some tools may require |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
195 Tk as well as Tcl. |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
196 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
197 Unfortunately there is considerable variation in Tcl installations. |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
198 In theory all Tcl installations have a file tclConfig.sh which |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
199 defines exactly how to compile and link code that uses Tcl, and Tk |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
200 has a similar file tkConfig.sh. The eCos configure scripts look for |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
201 these files, first in $(prefix)/lib, then in /usr/lib. If the system |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
202 already has a Tcl installation in /usr then the configure script will |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
203 automatically find /usr/lib/tclConfig.sh and it is not necessary |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
204 to pass additional options when configuring the eCos host-side |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
205 software. Alternatively, if for example you have installed a more |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
206 recent version of Tcl/Tk in the same place that you want to install the |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
207 eCos software, e.g. /usr/local, then $(prefix)/lib/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
208 will be read in. |
| 290 | 209 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
210 It is also possible that a more recent version of Tcl has been installed |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
211 in a different location. For example, you may wish to install the eCos host |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
212 tools in /opt/ecos but use a version of Tcl installed in /usr/local. The |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
213 eCos configure scripts need to be told explicitly where to look for |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
214 the Tcl: |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
215 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
216 $ <path>/configure --with-tcl=/usr/local ... |
| 290 | 217 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
218 Some systems, for example Debian Linux 3.0, do not install tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
219 in /usr/lib because that makes it more difficult to have several different |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
220 versions of Tcl installed at the same time. Instead tclConfig.sh is found |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
221 in a versioned directory such as /usr/lib/tcl8.3. Since several versions |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
222 may be installed the desired one must be specified explicitly. |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
223 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
224 $ <path>/configure --with-tcl-version=8.3 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
225 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
226 The --with-tcl and --with-tcl-version options are combined to give a search path: |
| 290 | 227 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
228 <with>/lib/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
229 <with>/lib/tcl<vsn>/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
230 <prefix>/lib/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
231 <prefix>/lib/tcl<vsn>/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
232 /usr/lib/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
233 /usr/lib/tcl<vsn>/tclConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
234 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
235 If tclConfig.sh cannot be found in any of these places then it is assumed |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
236 that Tcl has not been properly installed and the eCos configure script will |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
237 fail. The --with-tcl and --with-tcl-version are also used to give a search |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
238 path for tkConfig.sh |
| 290 | 239 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
240 <with>/lib/tkConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
241 <with>/lib/tk<vsn>/tkConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
242 <prefix>/lib/tkConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
243 <prefix>/lib/tk<vsn>/tkConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
244 /usr/lib/tkConfig.sh |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
245 /usr/lib/tk<vsn>/tkConfig.sh |
| 290 | 246 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
247 Again, the configure scripts must be able to find tkConfig.sh |
| 290 | 248 |
|
595
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
249 Once tclConfig.sh and tkConfig.sh have been found and read in, the eCos |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
250 configure scripts should have all the information needed to compile and |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
251 link code that uses Tcl. First the location of key headers such as |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
252 <tcl.h> is needed. A tclConfig.sh file may define TCL_INC_DIR to give |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
253 a specific location, otherwise the header files should be in |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
254 $(TCL_PREFIX)/include. If <tcl.h> cannot be found then the eCos configure |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
255 scripts will fail. |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
256 |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
257 Next it is necessary to work out how to link applications with Tcl. This |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
258 information should be provided by a tclConfig.sh variable TCL_LIB_SPEC. |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
259 Unfortunately not all Tcl installations set this, for example the cygwin |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
260 Tcl 8.4 release. If TCL_LIB_SPEC is not defined then instead the |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
261 configure script will look for a library libtcl<vsn>.a, where <vsn> is |
|
c2d1fd823f09
Update autoconf macro for Tcl, and regenerate affected files
bartv
parents:
491
diff
changeset
|
262 specified using --with-tcl-version, then for a library libtcl.a |
|
345
3f4258400ba5
Fix host-side configury problems which can occur if you are not using
bartv
parents:
290
diff
changeset
|
263 |
| 290 | 264 Following the configure step the build tree should be set up |
| 265 correctly. All that remains is the actual build and install: | |
| 266 | |
| 267 $ make | |
| 268 $ make install | |
| 269 | |
| 270 This should result in an ecosconfig executable, plus appropriate | |
| 271 libraries and header files. If the install prefix is a system | |
| 272 location, for example /usr/local/, then "make install" will normally | |
| 273 require root privileges. Also some of the package-specific software | |
| 274 has special installation requirements, for example programs that need | |
| 275 to be installed suid root, and this will also need root privileges. | |
| 276 | |
| 277 | |
| 278 Installing with Visual C++ | |
| 279 -------------------------- | |
| 280 | |
| 281 Under Windows it is possible to build the generic host-side software | |
| 282 (infra, libcdl and ecosconfig) with Visual C++ but this is deprecated. | |
| 283 Building with g++ under cygwin is preferred. | |
| 284 | |
| 285 It is still necessary to run the configure script and a suitable make | |
| 286 utility. That requires a shell and a Unix-like environment, as | |
| 287 provided by cygwin. The Visual C++ compiler cl.exe needs to be on the | |
| 288 shell's search path, and some environment variables such as INCLUDE | |
| 289 and LIB may need to be set to point at the Visual C++ installation - | |
| 290 the details may vary depending on the version of the compiler. Then | |
| 291 the configure command should be run like this: | |
| 292 | |
| 293 $ CC=cl CXX=cl <path>/host/configure <args> | |
| 294 | |
| 295 Note that the path should be a cygwin path: cygwin mount points are | |
| 296 accepted and forward slashes should be used. The various configure | |
| 297 scripts now detect that Visual C++ should be used, and adapt | |
| 298 accordingly. | |
| 299 | |
| 300 Depending on what cygwin mount points are set up, /usr/local may or | |
| 301 may not be an appropriate install location for VC++ applications. | |
| 302 If not, the install location should be specified with --prefix: | |
| 303 | |
| 304 $ CC=cl CXX=cl <path>/configure --prefix=<install-path> <args> | |
| 305 | |
| 306 It is also necessary to use the right version of Tcl. For a VC++ build | |
| 307 the cygwin release of Tcl should not be used. Instead a suitable | |
|
491
def85e4d96d2
http://dev.scriptics.com/ is now http://www.tcl.tk/
jlarmour
parents:
345
diff
changeset
|
308 prebuilt Tcl package can be obtained from http://www.tcl.tk/. |
| 290 | 309 It is necessary to tell the configure script where this has been |
| 310 installed, for example: | |
| 311 | |
| 312 $ CC=cl CXX=cl <path>/configure --prefix=<install-path> \ | |
| 313 --with-tcl=/cygdrive/d/local/scriptics/Tcl/tcl8.1 <args> | |
| 314 | |
| 315 The library name will be of the form tcl81.lib, and there will not be | |
| 316 a symbolic link from tcl.lib to the appropriate version. It will be | |
| 317 necessary to specify the Tcl version explicitly since the default | |
| 318 version is currently 8.0. | |
| 319 | |
| 320 $ CC=cl CXX=cl <path>/configure --prefix=<install-path> \ | |
| 321 --with-tcl=/d/local/scriptics/Tcl/tcl8.1 --with-tcl-version=81 <args> | |
| 322 | |
| 323 Following a successful configure, the tools can be built and installed | |
| 324 in the normal fashion: | |
| 325 | |
| 326 $ make | |
| 327 $ make install | |
| 328 | |
| 329 | |
| 330 More Information | |
| 331 ================ | |
| 332 | |
| 333 Please see the eCos web site, http://sources.redhat.com/ecos/, for | |
| 334 further details. This includes the FAQ, a form for reporting problems, | |
| 335 and details of the various mailing lists | |
| 336 (http://sources.redhat.com/ecos/intouch.html) At the time of writing | |
| 337 there are no separate mailing lists for the eCos host-side sources, | |
| 338 the main mailing list ecos-discuss@sources.redhat.com should be used | |
| 339 instead. | |
| 340 | |
| 341 //####COPYRIGHTBEGIN#### | |
| 342 // | |
| 343 //---------------------------------------------------------------------------- | |
| 344 // Copyright (C) 2002 Bart Veer | |
| 345 // Copyright (C) 2000, 2001 Red Hat, Inc. | |
| 346 // | |
| 347 // This file is part of the eCos host tools. | |
| 348 // | |
| 349 // This program is free software; you can redistribute it and/or modify it | |
| 350 // under the terms of the GNU General Public License as published by the Free | |
| 351 // Software Foundation; either version 2 of the License, or (at your option) | |
| 352 // any later version. | |
| 353 // | |
| 354 // This program is distributed in the hope that it will be useful, but WITHOUT | |
| 355 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 356 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| 357 // more details. | |
| 358 // | |
| 359 // You should have received a copy of the GNU General Public License along with | |
| 360 // this program; if not, write to the Free Software Foundation, Inc., | |
| 361 // 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| 362 // | |
| 363 // ---------------------------------------------------------------------------- | |
| 364 // | |
| 365 //####COPYRIGHTEND#### |