2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

	* cdl/hal_mips_vr4300_vrc437x.cdl: Indicate support of variable baud
	rates.

2001-10-30  Nick Garnett  <nickg@redhat.com>

	* include/platform.inc:
	Added local version of hal_intc_decode to make chaining work
	correctly.
	
	* include/plf_intr.h:
	Added local version of HAL_TRANSLATE_VECTOR() to make chaining
	work correctly.

2001-10-24  Nick Garnett  <nickg@redhat.com>

	* include/hal_diag.h: Fixed problem with support for virtual
	vector diagnostics.

	* include/platform.inc:
	Modify the ROM and ROMRAM version of hal_mon_copy_trampoline to
	copy the utlb trampoline to 0xa0000080 as well as 0xa0000000. This
	is necessary on 64 bit machines to catch 64 bit TLB exceptions.

2001-09-17  Nick Garnett  <nickg@redhat.com>

	* src/plf_misc.c:
	Added ISR for dealing with spurious interrupts from the VRC437X.
	Added PCI initialization routine.

	* src/platform.S: Change PCI IO base address setup to a more
	explicit value.

	* include/plf_io.h: Adjust PCI IO and memory base addresses to
	match the actual hardware setup.
	Add explicit PCI initialization routine.

	* include/platform.inc: Install bus error VSR in non-stub
	configurations too.

2001-09-07  Nick Garnett  <nickg@redhat.com>

	This package is newly created to contain code that is common to
	all VRC437X platforms. Most of the contents is derived from the
	original VRC4373 package. All ChangeLog entries other than this
	one were made when the files were in that package.  This ChangeLog
	entry describes any major changes that have occured to the files
	during the move.

	* include/platform.inc:
	Converted INITIAL_SR to INITIAL_SR_PLF to work with architecture
	and variant HALs.

	* src/plf_serial.c: File added to implement serial IO in a vector
	compatible manner.
		
	* cdl/hal_mips_vr4300_vrc437x.cdl: Generic configuration for all
	targets added. Platform specific configuration moved out to
	specific packages.
	
	* include/hal_diag.h:
	* include/plf_cache.h:
	* include/plf_intr.h:
	* include/plf_io.h:
	* include/plf_stub.h:
	* include/plf_z8530.h:
	* misc/stubrom.perm:
	* src/hal_diag.c:
	* src/plf_misc.c:
	* src/plf_stub.c:
	* src/pmon.S:
	Files move with minor changes only from original VRC4373 package.
	

2001-02-26  Jonathan Larmour  <jlarmour@redhat.com>

	* include/platform.inc: Always do unsigned arithmetic on addresses
	* src/platform.S: Ditto
	Reported by Chris Morrow <cmorrow@YottaYotta.com>

2001-02-05  Jesper Skov  <jskov@redhat.com>

	* include/plf_io.h: Ignore devices not on bus 0.

2001-01-31  Nick Garnett  <nickg@cygnus.co.uk>

	* src/platform.S: Added *va* (see mips/arch/.../arch.inc) macros
	when manipulating values that are potentially 64 bits.

2001-01-26  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h: Reset macros moved
	* include/plf_intr.h: to this file.

2000-10-20  Jonathan Larmour  <jlarmour@redhat.com>

	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.mlt:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt:
	Add heap1 section

	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
	Regenerated

2000-09-15  Nick Garnett  <nickg@cygnus.co.uk>

	* include/platform.inc: Added some extra ifdefs and code to try
	and get ROM startup working.

	* cdl/hal_mips_vr4300_vrc4373.cdl:
	Building GDB stubs was requiring ROM startup when it should have
	ROMRAM startup.

2000-08-31  Jonathan Larmour  <jlarmour@redhat.com>

	* src/platform.S (hal_pci_config_read): Prevent assembler reordering,
	the address is important

2000-08-16  Nick Garnett  <nickg@cygnus.co.uk>

	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h: 
	Fixed typo in last change. Forgot that the RAM base address
	appears twice in these files. Also fixed .h file to match.
	
2000-08-15  Nick Garnett  <nickg@cygnus.co.uk>

	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi:
	RAM start on these configurations should be 0x80000000 not
	0x80100000.

2000-05-22  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Removed CTRLC init hacks.

	* src/plf_misc.c (hal_ctrlc_isr_init): Made public.

2000-05-17  Jesper Skov  <jskov@redhat.com>

	* src/plf_misc.c: Let arch call ctrlc_init.

2000-02-18  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* cdl/hal_mips_vr4300_vrc4373.cdl (CYGBLD_BUILD_GDB_STUBS): When
	building stubs, define every dependency required here rather than
	in the template

2000-02-10  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h: 
	Removed HAL_STUB_PLATFORM_STUBS_INIT.

	* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed stubs as a
	legal startup type.

2000-02-07  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_mips_vr4300_vrc4373.cdl: use cpu options when linking.

2000-02-03  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_mips_vr4300_vrc4373.cdl: Implements stubs.

2000-01-27  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_mips_vr4300_vrc4373.cdl: Moved part of stubs build rule to
	common HAL. Changed description.

2000-01-24  Jesper Skov  <jskov@cygnus.co.uk>

	* cdl/hal_mips_vr4300_vrc4373.cdl: Add stubs build rule.

2000-01-24  John Dallaway  <jld@cygnus.co.uk>

	* cdl/*.cdl:

	Remove obsolete option CYGTST_TESTING_IDENTIFIER.

2000-01-19  Hugo Tyson  <hmt@cygnus.co.uk>

	* cdl/*.cdl: Add descriptions to a number of options &c which were
	lacking same, also tidied up other typos as noticed en passant.

1999-12-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* misc/stubrom.perm: Rename CYG_HAL_ROM_MONITOR ->
	CYGSEM_HAL_ROM_MONITOR

	* include/platform.inc: Rename CYG_HAL_USE_ROM_MONITOR_PMON ->
	CYGSEM_HAL_USE_ROM_MONITOR_PMON throughout
	Rename CYG_HAL_USE_ROM_MONITOR_GDB_STUBS ->
	CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs throughout

	* src/hal_diag.c: Likewise

	* src/plf_misc.c: Likewise. Similarly CYG_HAL_USE_ROM_MONITOR_CYGMON
	-> CYGSEM_HAL_USE_ROM_MONITOR_CygMon

	* cdl/hal_mips_vr4300_vrc4373.cdl: Add new platform-specific
	CYGSEM_HAL_USE_ROM_MONITOR and CYGSEM_HAL_ROM_MONITOR options to
	control ROM monitor support

1999-12-20  Gary Thomas  <gthomas@cygnus.co.uk>

	* cdl/hal_mips_vr4300_vrc4373.cdl: Add -Wl for linker options.

1999-11-25  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/pkgconf/hal_mips_vr4300_vrc4373.h: 
	Reparent under HAL MIPS variants as for other MIPS targets

1999-11-25  John Dallaway  <jld@cygnus.co.uk>

	* cdl/hal_mips_vr4300_vrc4373.cdl:

	Remove references to obsolete 'STUBS' memory layout.

1999-11-25  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.h: New file.

	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: Real file.

	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.h: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.h: New file(s).

1999-11-02  Jesper Skov  <jskov@cygnus.co.uk>

	* cdl/hal_mips_vr4300_vrc4373.cdl: Added.

1999-10-29  Nick Garnett  <nickg@cygnus.co.uk>

	* include/plf_intr.h: 
	* src/plf_misc.c: 
	* src/hal_diag.c:
	Changed CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT to
	CYGDBG_HAL_MIPS_DEBUG_GDB_CTRLC_SUPPORT.

1999-10-05  Nick Garnett  <nickg@cygnus.co.uk>

	* src/platform.S: Swapped around the IOPROF registers for
	big-endian mode. These 16 bit registers end up in opposite halves
	of the 32 bit word in big endian mode.

	* include/plf_z8530.h: In big-endian mode the Z8530 registers are
	at the other end of the word. This is easily fixed by redefining
	the DUART_BASE only.

1999-09-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_diag.c (hal_diag_write_char): Ack VRC4373 interrupt to
	prevent spurious interrupts
	* include/pkgconf/hal_mips_vr4300_vrc4373.h: 
	Add new CYGSEM_HAL_MIPS_VR4300_VRC4373_DIAG_ACKS_INT_0 option to
	control the above behaviour

1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/plf_intr.h (HAL_INTERRUPT_UNMASK): Rephrase to silence warnings
	about left-shifting negative numbers. Equivalent when optimized.
	(HAL_INTERRUPT_ACKNOWLEDGE): Likewise
	(HAL_INTERRUPT_MASK): Likewise

1999-09-09  Nick Garnett  <nickg@cygnus.co.uk>

	* include/platform.inc: Changed end address for copy from
	__bss_end to __ram_data_end.

1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/platform.S (NTLBENTRIES): Fix typo: 0x32 -> 32

	* include/platform.inc (hal_mon_copy_trampoline): Use branch delay slot
	when copying - both for ROMRAM startup and CYG_HAL_USE_ROM_MONITOR_PMON
	(hal_mon_init_vsr_table): Don't init debug vector - not used on
	vr4300 CPUs

1999-09-02  Nick Garnett  <nickg@cygnus.co.uk>

	* include/platform.inc: Added code to monitor setup to copy
	other_vector in to correct RAM location.

1999-08-19  Nick Garnett  <nickg@cygnus.co.uk>

	* include/plf_io.h: Added this file to contain PCI access support.

	* include/platform.inc:
	* src/platform.S: 
	Added function to read data from the PCI data register together
	with a data load/store VSR which catches any exceptions and fixes
	them up so that the program can continue.

1999-07-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_diag.c: Add prototypes for cyg_hal_is_break and
	cyg_hal_user_break to silence warning

1999-06-21  Nick Garnett  <nickg@cygnus.co.uk>

	* src/plf_misc.c (hal_ctrlc_isr): Changed all return codes to 2 so
	that the interrupt is reported as handled.

1999-06-17  Nick Garnett  <nickg@cygnus.co.uk>

	* include/platform.inc: Added code to initialize VSR slots for
	debug, utlb and nmi vectors.

	* misc/stubrom.perm: Added disable of
	CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT when building ROM monitor.

1999-06-10  Jesper Skov  <jskov@cygnus.co.uk>

	* src/plf_stub.c (hal_plf_stub_init): Fix config problem.

1999-06-10  Nick Garnett  <nickg@cygnus.co.uk>

	* src/plf_stub.c: Added interrupt acknowledge calls to character
	IO routines to prevent spurious interrupts.

1999-06-08  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_diag.c: Ensure that reads and writes do not provoke
	spurious interrupts.

	* include/platform.inc: Tidied up debug version of
	hal_diag_intr_start a little.

1999-05-28  Nick Garnett  <nickg@cygnus.co.uk>

	* misc/stubrom.perm: Added this file to contain a permutation for
	building a stub ROM for the VRC4373 board.

	* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed redfinitions
	triggered by CYG_HAL_STARTUP_STUBS.

	* include/plf_stub.h: Added HAL_STUB_PLATFORM_INIT and voided
	HAL_STUB_PLATFORM_INIT_BREAK_IRQ and HAL_STUB_PLATFORM_STUBS_INIT.

	* src/plf_stub.c: 
	Moved all setup into hal_plf_stub_init(). Deleted
	hal_plf_init_break_irq().
	
1999-05-27  Nick Garnett  <nickg@cygnus.co.uk>

	* src/plf_stub.c: 
	Moved Z8530 definitions out to plf_z8530.h.
	Added setup of install_async_breakpoint() function is vector
	table.
	
	* src/platform.S: Some minor tidies to the code.

	* src/hal_diag.c:
	Moved Z8530 definitions out to plf_z8530.h.
	Added modifications for Control-C support - mostly removing some
	defunct code.

	* include/plf_z8530.h
	Added this file to contain definitions and access macros to the
	Z8530 DUART for use in the HAL.
	
	* include/pkgconf/hal_mips_vr4300_vrc4373.h: Removed some
	unnecessary defines.

	* include/plf_intr.h:
	* src/plf_misc.c: 
	Added Control-C support.

	* include/platform.inc: Some minor changes to diagnostic macros.

1999-05-21  Nick Garnett  <nickg@cygnus.co.uk>

	* src/plf_stub.c (hal_plf_init_serial): Tidied away some unused
	code.

	* src/platform.S:
	Made use of ROMRAM startup option where relevant.
	Modified code to be position independent since under ROMRAM
	startup it is linked to run in RAM but must actually run in ROM
	prior to the copy.
	Added some delay loops to try and get the hardware to settle on
	startup. Without these the machine sometimes wedges after
	power-on.

	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.ldi: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_romram.mlt: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.ldi: 
	* include/pkgconf/mlt_mips_vr4300_vrc4373_stubs.mlt:
	Added these files to support the new startup types.
	Note: at present the .mlt files do not match the .ldi files.

	* include/pkgconf/hal_mips_vr4300_vrc4373.h:
	Added ROMRAM and STUBS startup options to CDL. Moved default ports
	for DIAG and GDB to 0 at 38400 baud.
	Added an ifdef to modify the configuration for STUBS startup.

	* include/plf_stub.h: Removed spurious include.

	* include/platform.inc:
	Added version of INITIAL_SR for use with GDB stubs.
	Added implementation of "lar" macro and converted the relevant
	instances of "la" to use it.
	Made use of ROMRAM startup option where relevant.
	Implemented copy of ROM image to RAM and transfer of control to
	it.
	Tidied up trampoline copy and VSR table init in monitor init
	macros.
	Added code to generate messages to the GrammerEngine PromIce AI
	interface during initialization.

1999-05-20  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/pkgconf/hal_mips_vr4300_vrc4373.h: Move RTC setup here.

1999-05-13  Nick Garnett  <nickg@cygnus.co.uk>

	Imported whole directory tree into main trunk of repository.
	
1999-05-11  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]	
	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi:
	Moved RAM and ROM back to their correct addresses.

	* include/pkgconf/hal_vr4300_vrc4373.h: 
	* include/pkgconf/hal_mips_vr4300_vrc4373.h:
	Renamed hal_vr4300_vrc4373.h to match file name synthesized by
	pkgconf.tcl.

	* src/hal_diag.c:
	* src/plf_stub.c: 
	Removed explicit include of vrc4372 pkgconf file.

1999-05-06  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]
	* include/pkgconf/hal_vr4300_vrc4373.h: Switched initial DIAG and
	GDB baud rates to 38400.

	* include/plf_stub.h:
	* src/plf_stub.c:
	Added hal_plf_stub_init() to initialize the virtual vector table
	for thread-aware debugging.

1999-05-05  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]	
	* include/platform.inc: Added code to plant interrupt VSR in table
	when using PMON.

1999-04-29  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]	
	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.ldi:
	* include/pkgconf/mlt_mips_vr4300_vrc4373_ram.mlt: 
	Load address moved to 0x80100000, which is the cacheable area (kseg0).

	* include/pkgconf/mlt_mips_vr4300_vrc4373_rom.ldi: For testing
	purposes ROM loaded code is put at 0x80680000 and its working RAM
	at 0x80600800. These will be moved back to the real addresses when
	we can build real ROMs.
	The corresponding .mlt file has NOT been changed.

	* src/plf_stub.c (hal_plf_init_serial): Re-enabled initialization
	of serial port.
	Temporarily made calls to PMON close function unconditional.

	* src/plf_misc.c (hal_platform_init): Added call to
	patch_dbg_syscalls().

	* src/platform.S: Lots of code, tables and definitions added to
	initialize the MMU and memory/bus controllers.

	* src/hal_diag.c: Added support for GDB protocol messages.

	* include/platform.inc: Added hal_mmu_init and hal_memc_init
	macros. Added code to initialize the VSR table in various
	configurations.	

1999-04-26  Gary Thomas  <gthomas@cygnus.co.uk>

	[VR4300 branch]	
	* include/pkgconf/hal_vr4300_vrc4373.h: Default diagnostics on port B.

	* src/hal_diag.c (hal_diag_init): Port initialization was incorrect.

1999-04-23  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]
	* include/platform.inc: Added some extra vsr table redirects for
	most other exceptions while we are running under PMON.

1999-04-22  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]		
	* include/plf_stub.h: 
	* src/plf_stub.c:
	* src/PKGconf.mak (COMPILE): 
	Files added to start work on GDB stub support.

1999-04-22  Gary Thomas  <gthomas@cygnus.co.uk>

	[VR4300 branch]	
	* src/hal_diag.c: 
	* include/pkgconf/hal_vr4300_vrc4373.h: Add diag/gdb serial
	port configury.

1999-04-22  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]	
	* include/platform.inc: Modified hal_intc_init to always enable
	IPL0..2 bits in CP0 status register.

1999-04-21  Nick Garnett  <nickg@cygnus.co.uk>

	[VR4300 branch]
	* src/plf_misc.c: Added this file to contain hal_platform_init().

	* src/pmon.S: Renamed pmon entry functions to avoid clashes with
	the C library. Removed unused code.

	* src/platform.S: Added this file. It contains an ISR springboard
	routine to decode interrupts via the vrc4372, a breakpoint
	springboard to allow breakpoints to continue being handled by
	PMON, and board specific versions of the ISR tables.
	[later] Fixed a bug in the ISR springboard, added a few comments
	too.
	
	* src/hal_diag.c: Implemented direct-to-hardware diagnostic
	output.

	* src/PKGconf.mak (COMPILE): Added platform.S.
	Added plf_misc.c.

	* include/plf_intr.h: Added extensive support for vr4372 interrupt
	controller.

	* include/platform.inc: Added an initial status register value to
	avoid upsetting PMON. Added plant of hal_breakpoint_springboard in
	VSR table. Added some diagnostic code to wiggle a led.
	Added an implementation of hal_intc_init. Changed initial status
	register value. Moved VRC4372 register definitions here.

