2002-09-21  Bart Veer  <bartv@ecoscentric.com>

	* common/common/build.cxx:
	Avoid const compatibility problems with Tcl 8.4

2002-08-12  Bart Veer  <bartv@ecoscentric.com>

	* standalone/win32/ReadMe:
	Move build instructions here from the toplevel

2002-08-03  Bart Veer  <bartv@ecoscentric.com>

	* standalone/common/Makefile.am, configure.in, acinclude.m4:
	Rework host-side autoconf support

	* common/common/build.cxx: fix typo
	
2002-02-08  Julian Smart <julians@redhat.com>

	* common/common/build.cxx: Added two missing backslashes

2002-02-07  Jonathan Larmour  <jlarmour@redhat.com>

	* common/common/build.cxx: correctly substitute forward slashes
	for backslashes.

2002-01-02  Julian Smart <julians@redhat.com>

    * Modified these files:

      host/tools/configtool/standalone/win32/Configtool.rc
      host/tools/configtool/standalone/win32/res/Splsh16.bmp 
      host/tools/configtool/standalone/win32/res/Splsh16_template.bmp 
      host/tools/configtool/standalone/wxwin/README.txt 
      host/tools/configtool/standalone/wxwin/about.htm 
      host/tools/configtool/standalone/wxwin/ecoslogosmall.png 
      host/tools/configtool/standalone/wxwin/reposdlg.cpp 
      host/tools/configtool/standalone/wxwin/bitmaps/splash16.bmp 
      host/tools/configtool/standalone/wxwin/bitmaps/splash16.png 
      host/tools/configtool/standalone/wxwin/setup/configtool.iss 
      host/tools/configtool/standalone/wxwin/setup/innobott.txt 
      host/tools/configtool/standalone/wxwin/setup/innotop.txt 

      incrementing the copyright year to 2002.

2001-12-03  Julian Smart <julians@redhat.com>

    * standalone/wxwin/templatesdlg.cpp: hardware is now sorted alphabetically
    on UNIX.

2001-10-25  Julian Smart <julians@redhat.com>

    * common/common/build.cxx: now generates /ecos-x names under Windows
    both compiling with Cygwin and VC++.

2001-09-13  Jonathan Larmour  <jlarmour@redhat.com>

	* common/common/build.cxx: Test for active properly in below change.

2001-09-12  Jonathan Larmour  <jlarmour@redhat.com>

	* common/common/build.cxx: Only use tests value if enabled/active.

2001-07-08  Jonathan Larmour  <jlarmour@redhat.com>

	* common/common/flags.cxx: Include <cctype> for isspace()

2001-02-14  Julian Smart  <julians@redhat.com>

    * standalone/win32/configtool.cpp
    
    Added support for Cygwin 00r1 when searching for registry hints.     

2000-08-15  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* common/win32/memmap.cpp (export_files): In header file, wrap parts
	that aren't ASM safe in "#ifndef __ASSEMBLER__"
	(export_sections): Ditto

2000-07-25  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* common/win32/memmap.cpp (export_sections): 
	Use CYG_LABEL_DEFN to define linker symbols

2000-07-18  John Dallaway  <jld@redhat.com>

	* standalone/win32/Configtool.rc:

	Update IDS_ECOS_SOURCEWARE_URL.

2000-07-03  John Dallaway  <jld@redhat.com>

	* common/win32/CTCommonDoc.cpp:

	Modify SelectPackages() to inhibit option value refresh
	while changing the version of an eCos package.

2000-06-27  John Dallaway  <jld@redhat.com>

	* standalone/win32/Configtool.rc:

	Update menu item text:
	"eCos Services Page" -> "eCos Product Page".

2000-06-22  John Dallaway  <jld@redhat.com>

	* standalone/common/cdl_exec.cxx:

	Modify cdl_list() to restore printf line which
	mysteriously disappeared some time ago.

2000-06-20  John Dallaway  <jld@redhat.com>

	* common/common/build.cxx:

	Modify generate_toplevel_makefile() to make the generated
	makefile fragment more generic.
	
2000-06-19  John Dallaway  <jld@redhat.com>

	* common/common/build.cxx:

	Modify generate_toplevel_makefile() to generate a rule
	to export global flags and command prefix as a makefile
	fragment for optional use by application developers.

2000-06-19  John Dallaway  <jld@redhat.com>

	* common/win32/CTCommon.rc:

	Replace OK/Cancel buttons with 'Close' button in the
	Build Options dialog.

	* common/win32/CTCommonDoc.cpp:

	Modify OnFileImport() to specify a default file extension
	for the File Import dialog box.

	* common/win32/memmap.cpp:

	Modify add_relative_sections_to_list() to skip sections
	which have already been added and track whether sections
	should be skipped.

	* standalone/common/ecosconfig.cxx:

	Modify main() to return error codes in a consistent manner.

	* standalone/win32/Configtool.rc:

	Update engineering team list.

2000-06-15  John Dallaway  <jld@redhat.com>

	* standalone/win32/ConfigToolDoc.cpp:

	Modify RunTests() to check for simulator platforms and
	inhibit prompting for hardware reset as appropriate.

	* standalone/win32/Configtool.dsp,
	  standalone/win32/ecosconfig.dsp:

	Link debug builds against tcl82d.lib rather than
	tcl82.lib.

	Look for libCDL in v:\cdl rather than v:\ide.

	* standalone/win32/Configtool.rc:

	Point to the eCos Product web page rather than the
	obsolete eCos Services web page.

2000-04-17  John Dallaway  <jld@cygnus.co.uk>

	* standalone/common/cdl_exec.cxx:

	Use PATH_MAX rather than _MAX_PATH in the Cygwin-hosted
	build.

2000-04-17  John Dallaway  <jld@cygnus.co.uk>

	* standalone/common/cdl_exec.cxx:

	Modify cmd_tree() to avoid non-standard use of
	getcwd().

2000-04-11  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CTCommonDoc.cpp:

	Modify OpenRepository() to pass error and warning
	handlers to CdlPackagesDatabaseBody::make(). This
	allows use of the config tool with repositories
	having missing packages.

2000-03-31  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp:

	Modify CygMount() to call the correct overloaded form
	of CSubprocess::Run().

2000-03-29  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/Configtool.rc,
	  standalone/common/ecosconfig.cxx,
	  standalone/win32/res/Splsh16.bmp:

	Update version strings.	

2000-03-28  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/cdl.sh,
	  standalone/win32/cdl.dsp:

	Remove obsolete files.

2000-03-28  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CTCommonDoc.cpp:

	Modify QualifyDocURL() to accommodate absolute HTML
	file paths returned by libCDL.

2000-03-22 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\MainFrm.cpp

  Include usr/bin in path.
  Use prefix-gcc rather than expect for test of validity of build tools path.

2000-03-21  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/ConfigItem.cpp:

	Modify GetURL() to return the correct default URL where
	the document has not been specified.

	* standalone/win32/Configtool.rc:

	Update IDS_RED_HAT_HOME_URL value.

	* common/win32/CTCommon.rc:

	Update context-sensitive help URLs.

2000-03-20  John Dallaway  <jld@cygnus.co.uk>

	* common/common/build.cxx:

	Modify resolve_tokens() to avoid breaking make variables
	specified in CDL custom rule targets and dependencies.

2000-03-15  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/Configtool.rc:

	Tweak main frame menu item text for eCos web pages.
	Tweak 'about' dialog box text for consistency.
	Update config tool version number to 1.3.2.

	* standalone/common/ecosconfig.cxx:

	Update ecosconfig version number to 1.3.2.

	* standalone/win32/res/Splsh16.bmp:

	Update config tool splash screen to version 1.3.2.

2000-03-13  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp,
	  standalone/win32/MainFrm.h:

	Modify PrepareEnvironment() to optionally prepare
	an environment without the build tools.

	* standalone/win32/ConfigToolDoc.cpp:

	Modify OnToolsAdministration() to prepare the environment
	for ecosadmin.tcl (without the build tools) before invoking
	the admin tool dialog.

2000-03-10 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp

	Move CeCosTrace class to its own file
  
2000-03-10  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp,
	  common/win32/CTCommon.rc:

	Modify OnToolsPaths() to provide a more accurate
	description of the contents of the build tools folder.

2000-03-08  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/Configtool.dsp:

	Remove obsolete files from the project.

2000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.cpp
  
	Eliminate GarbageCollector class in favor of CeCosTest::Init() and CeCosTest::Term()

2000-03-08  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/Configtool.dsw:

	Use relocated cdl project file.

2000-03-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp

  Do not use PCH on test tool files.

2000-03-03 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
  
  Thread-related eCosTest code extracted to new class CeCosThreadUtils  
  
2000-03-02 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
    standalone\win32\MainFrm.cpp

  Change to use common CSubprocess.

2000-03-02  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/Configtool.dsp:

	Add source and header for the admin tool
	'please wait' dialog.

2000-02-29  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CellView.cpp:

	Compare the current cell contents with the current
	value of the option when cancelling a cell edit.

	* common/common/build.cxx:

	Tidy source code.

2000-02-28  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp:

	Modify PrepareEnvironment() to add the bin directory
	of the install tree to the path as appropriate.

2000-02-28 Simon FitzMaurice <sdf@redhat.co.uk>
  * ChangeLog
    standalone\win32\MainFrm.cpp

  Correct logic in PrepareEnvironment()

2000-02-25  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp:

	Modify PrepareEnvironment() to add the Cygwin 1.0
	contrib/bin directory to the path as appropriate.

2000-02-24  John Dallaway  <jld@cygnus.co.uk>

	* standalone/win32/MainFrm.cpp:

	Modify PrepareEnvironment() to place the host tools
	directory at the head of the PATH and define the
	ECOS_REPOSITORY environment variable for use by the
	ecosconfig CLUI tool.

2000-02-24  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CdlTemplatesDialog.cpp,
	  common/win32/CdlTemplatesDialog.h:

	Add new UpdateDetails() member function to display the
	selected packages from both the hardware and non-hardware
	templates. The previous distinction was confusing.
  
	Sort the package aliases in the 'details' box.

	* common/win32/CTCommon.rc:
	
	Tweak static text in the template selection dialog to
	reflect the new functionality.

2000-02-24  John Dallaway  <jld@cygnus.co.uk>

	* standalone/common/cdl_exec.cxx:

	Modify cdl_exec::cmd_list() to sort the packages,
	targets and templates into alphabetical order.	

2000-02-23  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CTCommonDoc.cpp:

	Call SwitchMemoryLayout() rather than NewMemoryLayout()
	when importing a minimal save file or selecting new
	hardware since the required memory layout files may not yet
	be in the MLT directory.

	* standalone/win32/ConfigToolDoc.cpp:

	Modify SwitchMemoryLayout() to pass the MLT file paths to
	CFileFind::FindFile() correctly.

2000-02-22 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTUtils.*
 
  CTUtils has moved to utils folder.
  HTMLHelpLinkFileName and ShowHtmlHelp are now in doc class.

2000-02-22 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CellView.cpp
    common\win32\ControlView.cpp

  Fix problem with synchronization of cell and control views w/ mouse wheel movements.

2000-02-21 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.cpp
    common\win32\CTCommonres.h
    common\win32\CellView.cpp
    common\win32\ConfigToolDoc.h
    common\win32\cellview.h
    common\win32\stdafx.h
    standalone\common\ChangeLog
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp

  Move CTUtils and cell editing classes to Utils folder.
  Construct MultiLineEdit dialog from memory to avoid creating a Utils resource.

2000-02-18  Drew Moseley  <dmoseley@cygnus.com>

	* common/win32/ConfigItem.cpp: Support for CodeCoordinates

2000-02-18  John Dallaway  <jld@cygnus.co.uk>

	* common/win32/CTCommonDoc.cpp:

	Call UpdateAllViews(NULL, MemLayoutChanged) from
	NewMemoryLayout() instead of various other functions.
	The MLT view was not being updated correctly following
	a change of hardware template.

2000-02-18 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc

  Correct tab order in find dialog.

2000-02-18 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ControlView.cpp
    common\win32\FindDialog.cpp
    common\win32\stdafx.h

  Support searching in values.

2000-02-17 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp

  Do not disable callbacks during template selection (allow conflicts dialog to run)

2000-02-16 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\ConfigViewOptionsDialog.cpp
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Add support for adding platforms at run-time
  Ensure .chm file is only rebuild when necessary.

2000-02-15 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
    
  Avoid using html folder.
   
2000-02-15 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
    
  Use checked-in html files in HTMLHelp generation: include contents and index page generation.
   
2000-02-15 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp  
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\ConfigToolDoc.h
    common\win32\FolderDialog.cpp
    common\win32\NewFolderDialog.cpp
    standalone\win32\ConfigToolDoc.cpp
    
  Add error checking to the document-saving process.
  Emit meaningful error messages if save fails.    
  Restore document title and path if save fails.
  Fix Save As.  

2000-02-14 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\IdleMessage.cpp
    common\win32\Thermometer.cpp :

    More changes from Piet.

2000-02-14 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\common\build.cxx
    common\common\build.hxx
    common\common\flags.cxx
    common\common\flags.hxx
    standalone\common\cdl_exec.cxx
    standalone\common\cdl_exec.hxx
    standalone\common\ecosconfig.cxx  
    standalone\common\ecosconfig.hxx

  Update copyright headers in files with non-standard extensions :-).
    
2000-02-14 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\AddRemoveDialog.cpp
    common\win32\AddRemoveDialog.h
    common\win32\BuildOptionsDialog.cpp
    common\win32\BuildOptionsDialog.h
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.cpp
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\CTPropertiesDialog.cpp
    common\win32\CTPropertiesDialog.h
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\CdlPackagesDialog.cpp
    common\win32\CdlPackagesDialog.h
    common\win32\CdlTemplatesDialog.cpp
    common\win32\CdlTemplatesDialog.h
    common\win32\Cell.cpp
    common\win32\Cell.h
    common\win32\CellEdit.cpp
    common\win32\CellEdit.h
    common\win32\CellView.cpp
    common\win32\ComboEdit.cpp
    common\win32\ComboEdit.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\ConfigViewOptionsDialog.cpp
    common\win32\ConfigViewOptionsDialog.h
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\DescView.cpp
    common\win32\DescView.h
    common\win32\DoubleEdit.cpp
    common\win32\DoubleEdit.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\FindDialog.cpp
    common\win32\FindDialog.h
    common\win32\FolderDialog.cpp
    common\win32\FolderDialog.h
    common\win32\IdleMessage.cpp
    common\win32\IdleMessage.h
    common\win32\IncludeSTL.h
    common\win32\IntegerEdit.cpp
    common\win32\IntegerEdit.h
    common\win32\MultiLineEditDialog.cpp
    common\win32\MultiLineEditDialog.h
    common\win32\NewFolderDialog.cpp
    common\win32\NewFolderDialog.h
    common\win32\NotePage.cpp
    common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h
    common\win32\PropertiesView.cpp
    common\win32\PropertiesView.h
    common\win32\RegionGeneralPage.cpp
    common\win32\RegionGeneralPage.h
    common\win32\RulesList.cpp
    common\win32\RulesList.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    common\win32\SectionGeneralPage.cpp
    common\win32\SectionGeneralPage.h
    common\win32\SectionRelocationPage.cpp
    common\win32\SectionRelocationPage.h
    common\win32\SplitterWndEx.cpp
    common\win32\SplitterWndEx.h
    common\win32\StdAfx.cpp
    common\win32\StringEdit.cpp
    common\win32\StringEdit.h
    common\win32\TTListCtrl.cpp
    common\win32\TTListCtrl.h
    common\win32\Thermometer.cpp
    common\win32\Thermometer.h
    common\win32\cellview.h
    common\win32\memmap.cpp
    common\win32\memmap.h
    common\win32\messagebox.cpp
    common\win32\messagebox.h
    common\win32\mltview.cpp
    common\win32\mltview.h
    common\win32\notepage.h
    common\win32\resource.h
    common\win32\stdafx.h
    common\win32\thinsplitter.cpp
    common\win32\thinsplitter.h
    standalone\win32\BCMenu.cpp
    standalone\win32\BCMenu.h
    standalone\win32\BinDirDialog.cpp
    standalone\win32\BinDirDialog.h
    standalone\win32\CTres.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\MLTFrame.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp
    standalone\win32\OutputView.h
    standalone\win32\Splash.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
    standalone\win32\splash.cpp

  Update copyright headers

2000-02-11  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\ecosconfig.cxx:

  Update ecosconfig version string to "1.3.1".

2000-02-09 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    standalone\win32\Configtool.dsp

  Avoid crash in HTMLHelp 1.3 when "What's This?" windows deactivated.
  Provide hook to disable "What's This?" help for dialogs requiring context menus.

2000-02-08  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.rc:

  Update 'about' box version string for release 1.3.1.

2000-02-08 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\ConfigToolDoc.cpp

  Keep test list sorted

2000-02-08 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\ConfigItem.cpp
    common\win32\IdleMessage.cpp
    common\win32\Thermometer.cpp

  Changes from Piet for new ref counting interface.

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\BCMenu.cpp
    standalone\win32\BCMenu.h

  Reinsert copyright header

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc

  Remove unused bitmaps

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\CTres.h
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc

  Remove scrolling credits

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    standalone\win32\MainFrm.cpp

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp

  Introduce \D_WIN32_IE=0x0400

2000-02-07  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\res\Splsh16.bmp:

	Update splash screen for release 1.3.1.

2000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Remove unused variables (in particular, timer which was being killed but not created)

2000-02-04 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
  
  Remove MappedBitmapButton  
  
2000-02-04 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\MainFrm.h

  Ensure shortcuts for popup menus functional.

  * common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\FailingRulesDialog.cpp
    common\win32\RulesView.cpp
    common\win32\StdAfx.cpp
    common\win32\mltview.cpp
    common\win32\mltview.h
    common\win32\stdafx.h
    standalone\win32\OutputView.cpp
    standalone\win32\OutputView.h

  Correct for abnormal behaviour of vsnprintf under NT.

  * standalone\win32\Configtool.rc

  Output view context menu "Save" should have ellipsis.
    
  * standalone\win32\ecosconfig.dsp

  Use cdl from v:\ide 

2000-02-04 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommonres.h
    standalone\win32\CTres.h

  These files cannot have copyright banners.

2000-02-03 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h

  Allow overlapping solutions.
  Display dialog in respect of conflicts without solutions.

  * standalone\win32\ConfigToolDoc.cpp
    standalone\win32\MainFrm.cpp
    common\win32\RulesList.cpp
    common\win32\RulesView.cpp

  Remove unnecessary #includes

2000-02-03 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\ConfigToolDoc.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\RulesList.cpp
    common\win32\RulesView.cpp
    common\win32\RulesView.h

  Implement multiple selection in Resolve Conflicts dialog and conflicts window.
  Add "Resolve" context menu item to conflicts window.

2000-02-02 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\ConfigItem.cpp

  Ensure when package is unloaded stale tree handles are not accessed.

2000-02-02 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\FailingRulesDialog.cpp

  Rework to avoid use of CConfigItems (because fixes may involve packages not yet loaded)

2000-02-02 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\SectionGeneralPage.cpp
    common\win32\SectionRelocationPage.cpp

  Changes required by IDE API changes.

2000-02-02 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\MainFrm.cpp

  Make sure to reset the CSubProcess pointer to null if we fail to run the subprocess.

2000-02-01 Simon FitzMaurice <sdf@redhat.co.uk>
  * standalone\win32\BCMenu.cpp
    standalone\win32\BCMenu.h
    standalone\win32\CreditStatic.cpp
    standalone\win32\CreditStatic.h

  These files shouldn't have our copyright on them yet.

2000-02-01 Simon FitzMaurice <sdf@redhat.co.uk>
  * common\win32\AddRemoveDialog.cpp 
    common\win32\AddRemoveDialog.h 
    common\win32\BuildOptionsDialog.cpp 
    common\win32\BuildOptionsDialog.h 
    common\win32\CTCommonDoc.cpp 
    common\win32\CTCommonres.cpp 
    common\win32\CTCommonres.h 
    common\win32\CTOptionsDialog.cpp 
    common\win32\CTOptionsDialog.h 
    common\win32\CTPropertiesDialog.cpp 
    common\win32\CTPropertiesDialog.h 
    common\win32\CTUtils.cpp 
    common\win32\CTUtils.h 
    common\win32\CdlPackagesDialog.cpp 
    common\win32\CdlPackagesDialog.h 
    common\win32\CdlTemplatesDialog.cpp 
    common\win32\CdlTemplatesDialog.h 
    common\win32\Cell.cpp 
    common\win32\Cell.h 
    common\win32\CellEdit.cpp 
    common\win32\CellEdit.h 
    common\win32\CellView.cpp 
    common\win32\ComboEdit.cpp 
    common\win32\ComboEdit.h 
    common\win32\ConfigItem.cpp 
    common\win32\ConfigItem.h 
    common\win32\ConfigToolDoc.h 
    common\win32\ConfigViewOptionsDialog.cpp 
    common\win32\ConfigViewOptionsDialog.h 
    common\win32\ControlView.cpp 
    common\win32\ControlView.h 
    common\win32\DescView.cpp 
    common\win32\DescView.h 
    common\win32\DoubleEdit.cpp 
    common\win32\DoubleEdit.h 
    common\win32\FailingRulesDialog.cpp 
    common\win32\FailingRulesDialog.h 
    common\win32\FindDialog.cpp 
    common\win32\FindDialog.h 
    common\win32\FolderDialog.cpp 
    common\win32\FolderDialog.h 
    common\win32\IdleMessage.cpp 
    common\win32\IdleMessage.h 
    common\win32\IncludeSTL.h 
    common\win32\IntegerEdit.cpp 
    common\win32\IntegerEdit.h 
    common\win32\MultiLineEditDialog.cpp 
    common\win32\MultiLineEditDialog.h 
    common\win32\NewFolderDialog.cpp 
    common\win32\NewFolderDialog.h 
    common\win32\NotePage.cpp 
    common\win32\PropertiesList.cpp 
    common\win32\PropertiesList.h 
    common\win32\PropertiesView.cpp 
    common\win32\PropertiesView.h 
    common\win32\RegionGeneralPage.cpp 
    common\win32\RegionGeneralPage.h 
    common\win32\RulesList.cpp 
    common\win32\RulesList.h 
    common\win32\RulesView.cpp 
    common\win32\RulesView.h 
    common\win32\SectionGeneralPage.cpp 
    common\win32\SectionGeneralPage.h 
    common\win32\SectionRelocationPage.cpp 
    common\win32\SectionRelocationPage.h 
    common\win32\SplitterWndEx.cpp 
    common\win32\SplitterWndEx.h 
    common\win32\StdAfx.cpp 
    common\win32\StringEdit.cpp 
    common\win32\StringEdit.h 
    common\win32\TTListCtrl.cpp 
    common\win32\TTListCtrl.h 
    common\win32\Thermometer.cpp 
    common\win32\Thermometer.h 
    common\win32\cellview.h 
    common\win32\listctrltoview.inl 
    common\win32\memmap.cpp 
    common\win32\memmap.h 
    common\win32\messagebox.cpp 
    common\win32\messagebox.h 
    common\win32\mltview.cpp 
    common\win32\mltview.h 
    common\win32\notepage.h 
    common\win32\resource.h 
    common\win32\thinsplitter.cpp 
    common\win32\thinsplitter.h 
    common\win32\treectrltoview.inl 
    standalone\win32\BCMenu.cpp 
    standalone\win32\BCMenu.h 
    standalone\win32\BinDirDialog.cpp 
    standalone\win32\BinDirDialog.h 
    standalone\win32\CTres.cpp 
    standalone\win32\CTres.h 
    standalone\win32\ConfigToolDoc.cpp 
    standalone\win32\Configtool.cpp 
    standalone\win32\Configtool.h 
    standalone\win32\Configtool.rc 
    standalone\win32\CreditStatic.cpp 
    standalone\win32\CreditStatic.h 
    standalone\win32\MLTFrame.h 
    standalone\win32\MainFrm.cpp 
    standalone\win32\MainFrm.h 
    standalone\win32\MappedBitmapButton.cpp 
    standalone\win32\MappedBitmapButton.h 
    standalone\win32\OutputView.cpp 
    standalone\win32\OutputView.h 
    standalone\win32\Splash.h 
    standalone\win32\ViewOptions.cpp 
    standalone\win32\ViewOptions.h 
    standalone\win32\splash.cpp:

  Normalize copyright headers.

2000-01-31 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc

  Adjust help URLs in line with new doc layout.

2000-01-28 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc

  Adjust help URLs in line with new doc layout.

2000-01-28 Simon FitzMaurice  <sdf@redhat.co.uk>

  * standalone\win32\MainFrm.cpp

  Remove redundant status bar pane.  
  Allow LH pane to occupy all remaining space.

2000-01-28 Simon FitzMaurice  <sdf@redhat.co.uk>
  
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h

  Introduce resource IDs for Help menu help URLs

  * common\win32\CTCommonDoc.cpp

  Ensure global conflicts resolution considers all changes.

  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    standalone\win32\Configtool.cpp

  Provide function to return "link2.htm" full path name; delete this file on app exit.

  * common\win32\FailingRulesDialog.cpp

  Fix greying of All button; do not allow All and None buttons to affect non-visible items.

  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Introduce HTMLHelp navigation complete handler (not functional yet)

2000-01-28  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\ConfigtoolDoc.cpp:

	Modify OnBuildTemplates() to call SelectHardware()
	before SelectTemplate() rather than after it. This
	ensures that CDL option values specified in the
	template are applied to the new HAL rather than the
	old one.

2000-01-27  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx,
	  standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx:

	Use the inference callback function to report resolved
	conflicts for all commands, not just 'resolve'.

	Add '--no-resolve' qualifier to explicitly disable the
	inference engine.

2000-01-25  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\Configtool.cpp,
	  standalone\win32\Configtool.h:

	Add new GetInstallVersionKey() member function to
	retrieve the path to the eCos installation version
	key from the registry.

	Modify LoadStdProfileSettings() to observe the default
	build tools and user tools paths specified by the
	installer.

2000-01-25  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Fix cygpath() to use the no-space file path when built
	under Cygwin.

	* standalone\win32\Configtool.rc:

	Update version resource and copyright strings for
	release 1.3.

2000-01-21 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp

  Ensure modified flag is set following [hardware] template changes.

2000-01-21 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\mltview.h
    standalone\win32\CTres.h
    standalone\win32\Configtool.h

  Remove use of class CProperties

  * standalone\win32\Configtool.rc
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h

  Remove "expand\collapse tree" option

2000-01-21  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp:

	Modify CurrentTestingIdentifier() to return the CDL
	target identifier. This is now the _default_ testing
	identifier and should be overridable in one of the
	eCosTest dialogs.

2000-01-21  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp:

	Modify OnFileImport() to accommodate recent libCDL API
	change.

2000-01-21  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx:

	Add '--version' switch to show tool version, build time
	and copyright notice.

2000-01-19 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    standalone\win32\Configtool.rc

    Move help about text to standlone-specific resource and update.

2000-01-19  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\res\Splsh16.bmp:

	Update splash screen for release 1.3.

2000-01-18 Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\Configtool.rc

  Update version info.

2000-01-18 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    standalone\win32\CTres.h
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

    Cygnus -> Red Hat (excluding copyrights)

2000-01-18 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    standalone\win32\ConfigToolDoc.cpp

  Move code appropriate to package unloading etc... to common function RegenerateData()

  * standalone\win32\MainFrm.cpp

  Do not display toolbars too early.

2000-01-17 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ConfigToolDoc.h

  Correct accidental removal of RunTests() function.

2000-01-14 Simon FitzMaurice  <sdf@redhat.co.uk>?
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.cpp
    common\win32\CTCommonres.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h

  Slightly clearer text on conflicts dialog CSH.  Renamed *FAILING_RULES* resources *RESOLVE_CONFLICTS*.

  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp

  Grouped test running code in one place in standalone tool.  
  Corrected action on save document if user cancels from resolve conflicts dialog.

2000-01-13 Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\BCMenu.cpp
    standalone\win32\BCMenu.h

  Picked up later versions

  * standalone\win32\MainFrm.cpp

  Fix toolbar persistence

  * standalone\win32\Configtool.rc
    standalone\win32\res\Toolbar.bmp

  Adjust toolbar heights

2000-01-12  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp:

	Modify GenerateHeaders() to avoid copying non-config
	headers to the install tree in the standalone config
	tool. The make system does this copying.

	* standalone\win32\MainFrm.cpp:

	Modify OnToolsShell() to invoke the shell even if the
	build tree is not yet known.

	Modify PrepareEnvironment() to avoid mounting the
	logical drives containing the build, install and
	repository trees if this information is not yet known.

2000-01-11  John Dallaway  <jld@redhat.co.uk>

	* common\win32\ConfigToolDoc.h,
	  standalone\win32\ConfigToolDoc.cpp:

	Restrict use of short file paths to the generation of
	GNU makefiles only, now that the IDE will quote file paths
	containing spaces. A few additional short paths remain
	pending migration to the use of GnuCompiler::addInclude().

2000-01-11  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp:

	Modify SelectTemplate() and SelectHardware() to
	avoid copying new MLT files to the build tree if
	the document has not yet been saved.

2000-01-11 Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\DescView.cpp
    common\win32\PropertiesView.cpp
    common\win32\RulesView.cpp
    common\win32\mltview.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  * Restore missing string resource ID
    Continue top-level CSH implementation

2000-01-11 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.cpp
    common\win32\CTCommonres.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\StdAfx.cpp

  Update conflicts dialog to reflect EID.

  * standalone\win32\ConfigToolDoc.cpp
    common\win32\CellView.cpp
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\DescView.cpp
    common\win32\DescView.h
    common\win32\PropertiesView.cpp
    common\win32\PropertiesView.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    common\win32\cellview.h
    common\win32\mltview.cpp
    common\win32\mltview.h

  F1 help for top-level windows  

2000-01-11  John Dallaway  <jld@redhat.co.uk>

	* common\win32\RulesList.cpp,
	  common\win32\RulesList.h,
	  common\win32\RulesView.cpp,
	  common\win32\RulesView.h:

	Restore double-click handling to the conflicts view.

	Move the AssociatedItemName() function from the
	RulesView class to the RulesList class and rename
	to AssociatedItem() for use by the double-click
	handler.

2000-01-10  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommon.rc,
	  common\win32\CTCommonres.h,
	  
	Modify the constructor to calculate the default
	repository location from the plug-in installation
	location if the per-user registry value is not
	found.

2000-01-10  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\CTres.h,
	  standalone\win32\CTres.cpp,
	  standalone\win32\CdlTemplatesDialog.cpp (remove),
	  standalone\win32\CdlTemplatesDialog.h (remove),
	  standalone\win32\Configtool.rc,
	  common\win32\CTCommon.rc,
	  common\win32\CTCommonres.cpp,
	  common\win32\CTCommonres.h,
	  common\win32\CdlTemplatesDialog.cpp (add),
	  common\win32\CdlTemplatesDialog.h (add),
	  standalone\win32\Configtool.dsp:

	Make the enhanced template selection dialog common
	between the standalone and plug-in versions of
	the eCos configuration tool.

2000-01-10  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\CTres.h,
	  standalone\win32\CdlTemplatesDialog.cpp,
	  standalone\win32\CdlTemplatesDialog.h,
	  standalone\win32\Configtool.rc:

	Add list of packages in the selected software template
	to the templates dialog box in preparation for commoning
	the standalone and plug-in versions of the dialog.

2000-01-07 Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\ConfigToolDoc.cpp

  Treat the result of ResolveGlobalConflicts correctly

2000-01-07 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\PropertiesList.cpp

  CR 901982

2000-01-06 Simon FitzMaurice  <sdf@redhat.co.uk>
  *  common\win32\ControlView.cpp

  CR 901981

2000-01-05  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp,
	  standalone\win32\ConfigToolDoc.cpp,
	  common\win32\ConfigTool.h:

	Modify SelectTemplate() to accommodate a template
	version parameter.

	Add a new member variable (m_template_version) to
	the document class to hold the version of currently
	selected template since this cannot be obtained from
	libCDL.

	Modify OpenRepository() to use the new template version
	member variable.

	* standalone\win32\ConfigToolDoc.cpp,

	Pass template version parameter in all calls to
	CConfigToolDoc::SelectTemplate().

	* standalone\win32\CdlTemplatesDialog.cpp,
	  standalone\win32\CdlTemplatesDialog.h,
	  standalone\win32\Configtool.rc,
	  standalone\win32\CTres.h,

	Add new template version combo box to the template selection
	dialog.

2000-01-04  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\Configtool.rc:

	Update copyright notices for the new year.

1999-12-22 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonres.cpp
    standalone\win32\CTres.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp

  Dummy CSH for dialogs.

1999-12-21 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.cpp
    
  Migrate mapping of common control IDs to eCosTestDialog

1999-12-21 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\ControlView.cpp
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\stdafx.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc
    
  Introduce separate help maps for each component.

1999-12-21 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\FileName.cpp

  Fix it.

1999-12-21  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp

	Provide an implementation of the minimal eCos
	configuration import function.

1999-12-21  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp
	  common\win32\ConfigToolDoc.h
	  standalone\win32\CTres.h
	  standalone\win32\ConfigToolDoc.cpp
	  standalone\win32\Configtool.rc

	Add new menu items for the import and export of
	minimal eCos configuration save files. Provide
	an implementation of the export function.

1999-12-17 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\FileName.cpp
    common\win32\FileName.h

  Move to Utils directory

1999-12-17 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\FileName.cpp
    common\win32\FileName.h

  Add ReplaceExtension() function

  * common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\eCosPropertyPage.cpp
    common\win32\eCosPropertyPage.h

  Use common code between Dialog and Property page variants of CSH classes.

  * standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.h
    standalone\win32\MainFrm.cpp

  Set default .chm file name from executable name

1999-12-20  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTUtils.cpp

	Fix CUtils::StripExtraWhitespace() to replace a sequence
	of whitespace characters with a single space character
	rather than preserving the first whitespace character in
	the sequence.

1999-12-20  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx,
	  standalone\common\ecosconfig.cxx:

	Enhance 'new' and 'template' commands to accept a template
	version argument.

	Add 'import' and 'export' commands for the manipulation of
	minimal save files.

1999-12-17 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h

  Fix problem of multiple requires properties not all displaying 
    
  * common\win32\CTUtils.cpp

  Speed up StripExtraWhitespace to allow properties view to paint nicely

  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp

  Ensure minimal work on saving an unmodified doc

  * standalone\win32\MainFrm.cpp

  Ensure current dir selected in build tools dialog

1999-12-17  John Dallaway  <jld@redhat.co.uk>

	* common\win32\memmap.cpp:

	Initialise the memory map size.

1999-12-17 Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Restore "automounting" of drives for install and build trees + repository

1999-12-16 Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\MainFrm.cpp
  
  Ensure standalone config tool view menu checkmarks assume state on app initialisation

1999-12-16 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\FailingRulesDialog.cpp

  Prevent crash in release build: ASSERT->VERIFY

  * common\win32\ControlView.cpp

  Prevent crash in release build: test on NULL!=GetFocus()

1999-12-14 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    common\win32\FileName.cpp
    common\win32\FileName.h
    standalone\win32\ConfigToolDoc.cpp

  Work around problem w\ spaces in filenames: remove spaces from install tree, build tree and repository

1999-12-14 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CSHDialog.cpp
    common\win32\CSHDialog.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h

  Add overridable GetInstanceHandle()

  * standalone\win32\ConfigToolDoc.cpp

  Close document before invoking pkgadmin dialog
        
1999-12-13 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CSHPropertyPage.cpp
    common\win32\CSHPropertyPage.h
    
  Match guicommon version 
    
  * standalone\win32\Configtool.dsp
    common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\eCosDialog.h
    common\win32\eCosPropertyPage.h
    standalone\win32\CTres.h
    standalone\win32\Configtool.rc

  Move IDR_MLTBAR and IDB_BITMAP2 to common resources

  * standalone\win32\ConfigToolDoc.cpp

  Improve handling when tools admin

1999-12-13  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp,
	  common\win32\ConfigItem.cpp,
	  common\win32\ConfigToolDoc.h,
	  standalone\win32\CdlTemplatesDialog.cpp:

	Synchronize with recent libCDL API changes.

1999-12-13  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx:

	Synchronize with recent libCDL API changes.

1999-12-13  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\MainFrm.cpp:

	Modify Build() function to form 'make <target>'	command
	strings correctly.

1999-12-10  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx.

	Define the make variable OBJCOPY for use by CDL custom
	rules.

1999-12-09 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonres.h
    standalone\win32\CTres.h
    
  Renumber resource IDs  (CR 901703)


  * common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h

  Disable buttons as appropriate on dialog initialization (CR 901688)

1999-12-09 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\MainFrm.cpp

  Move persistence of registry to Software\Cygnus Solutions\eCos\Common\Repository\folder.

1999-12-08 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Use IDE debugger as far as possible (not functional yet).
  Call pkgadmin as built-in dialog

1999-12-07 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp

  Remove reference to runtestssheet

1999-12-07 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    
    Restore standard app string ids
    
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp

    Use function to determine test executable names

  * common\win32\ControlView.cpp

    Remove unused variable

1999-12-07  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx,
	  standalone\common\ecosconfig.cxx:

	Add 'list' command to view the repository database.

1999-12-06 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\subprocess.cpp
    common\win32\subprocess.h
    common\win32\CTCommonDoc.cpp
    common\win32\Thermometer.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp
    standalone\win32\OutputView.h

  Overhaul CSubprocess class

1999-12-06  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx,
	  standalone\common\ecosconfig.cxx:

	Rename 'hardware' command to 'target' in line with
	libCDL error messages.

1999-12-03  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_toplevel_makefile() to honour the
	priorities of custom make rules.

	Modify generate_toplevel_makefile() to ignore the
	install tree during 'make clean'.

1999-12-03  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify cygpath() to use the Cygwin function
	cygwin_conv_to_posix_path() for Cygwin builds.

1999-12-02 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\StdAfx.cpp
    common\win32\stdafx.h

  Move trace fn to global namespace

1999-12-02 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\stdafx.h

  Circumvent 512 character limit in TRACE

1999-12-02  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_makefile() to resolve <PACKAGE> tokens.

1999-12-01  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_toplevel_makefile() and
	generate_makefile() to resolve <PREFIX> and
	<REPOSITORY> tokens.

	Modify generate_makefile() to use the VPATH with
	wildcard expansion to accommodate 'make -n' for
	custom rules.

1999-12-01 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\RulesView.cpp
    common\win32\RulesView.h

  Make locate work properly on both columns in conflicts view.

1999-12-01 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
  
  Place exception handler around get_build_info() call
  
1999-12-01 Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\ConfigToolDoc.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\MainFrm.cpp

  More conflict resolution work - for global conflicts

  * common\win32\FileName.cpp
    common\win32\FileName.h

  Introduce file-finding utility function.

1999-12-01  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommon.rc:

	Add Robert Erskine to the list of eCos team members in the
	'Help About' dialog box.

1999-12-01  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx:

	Add inference_callback() function to report resolved
	conflicts.

	Modify cmd_resolve() to use the new inference_callback()
	function.

1999-11-30  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_makefile() to make the 'headers' target
	dependent on the new 'mlt_headers' target defined in
	pkgconf\rules.mak.

1999-11-30  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_makefile() to generate separate rules
	for copying each header file to the install tree. This
	speeds up 'make headers' considerably.

1999-11-30  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Modify generate_makefile() to replicate the global
	variables in each package makefile. This facilitates the
	rebuilding of individual packages in isolation.

1999-11-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\ConfigToolDoc.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.rc

  Moved sourceware references to be standalone-specific

  * common\win32\CTCommonDoc.cpp

  Do not complain about failing rules if document already saved

  * standalone\win32\MainFrm.cpp

  Try global conflict resolution

1999-11-29  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx,
	  standalone\common\cdl_exec.cxx,
	  standalone\common\cdl_exec.hxx:

	Add experimental 'resolve' command to resolve global
	configuration conflicts.

1999-11-29  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx,
	  standalone\common\ecosconfig.h:

	Add new function trim_path() to remove the trailing
	directory separator char (if present) from a
	file path.

	Call trim_path() on the user-specified repository and
	install tree paths.

1999-11-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  *  common\win32\CellView.cpp

  Ignore empty strings in integer or floating cells - only are legal as intermediate values

1999-11-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Now using CDL test name values to find test executables.

  * standalone\win32\ViewOptions.cpp

  Test for existence of viewer is not enough: it must be a file

1999-11-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Introduce class for registry access and simplify code accordingly
  Remove some more unused variables and code
  Prevent thread calculating thermometer max accessing GUI objects

1999-11-26  John Dallaway  <jld@redhat.co.uk>

	* common\common\build.cxx:

	Add path_to_vector() and nospace_path() functions to
	calculate a Win32 file path which does not contain
	spaces but which otherwise preserves long directory
	names.

	Modify cygpath() to use nospace_path() rather than
	call GetShortPathNameA() directly.

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ControlView.cpp
  Correct find bug.

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp

  Use a smooth progress control for accuracy.
  Remove more unused stuff.
  Use a better algorithm for estimating a build duration.

1999-11-25  John Dallaway  <jld@redhat.co.uk>

	* standalone\win32\ConfigToolDoc.cpp,

	Modify SwitchMemoryLayout() to copy default memory
	layout files only where they do not already exist
	at the destination location.

	* common\win32\ConfigItem.cpp:

	Modify the string version of SetValue() to reference the
	transaction object as appropriate.

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\Configtool.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
  Correct confusion between UNICODE and ANSI in reading registry for bin dirs

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ControlView.cpp
  Normalize IsActive, IsEnabled functions in CConfigitem.
  Removed unused members from CConfigItem
  Removed m_nIndex from CConfigItem
  Fixed NULL transaction being passed to cdl layer

  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
  Removed unused members 

  * common\win32\SplitterWndEx.cpp
    common\win32\SplitterWndEx.h
  Fixed crash on hiding MLT

  * common\win32\CTCommonres.h
    standalone\win32\CTres.h
  Restored IDS_REGKEY

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ControlView.cpp
    common\win32\SplitterWndEx.cpp
    common\win32\SplitterWndEx.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h


1999-11-25  John Dallaway  <jld@redhat.co.uk>

	* common\win32\CTCommonDoc.cpp:

	Modify SaveMemoryMap() to no longer export the memory
	layout to the build tree. The layout is now only exported
	to the install tree.

	Modify CopyMLTFiles() to no longer copy the default memory
	layout exports from the repository to the build tree. The
	layouts are now only copied to the install tree and only
	where they are not already present. 

	Modify MLTDir() to generate the MLT save file directory path
	by appending "_mlt" to the root name of the config save file.

	Modify UpdateBuildInfo() to correctly pass the install tree
	path to generate_build_tree().

	* standalone\win32\ConfigToolDoc.cpp:

	Modify SwitchMemoryLayout() to make correct use of the
	MLTDir() function.

	Modify OnOpenDocument() and OnSaveDocument() to call
	SetPathName() explicitly such that MLTDir() returns the correct
	value.

	Modify SetPathName() to generate the build and install
	directory paths by appending "_build" and "_install" respectively
	to the root name of the config save file.

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\ConfigToolDoc.cpp

  Use "native" in the case of no toolchain prefix.

1999-11-25  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
  Complete changes for build paths and remove yet more unused variables.
  Place registry keys in string resources.

1999-11-24  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h
    common\win32\PropertiesView.cpp
    common\win32\RulesList.cpp
    common\win32\RulesList.h
    common\win32\RulesView.cpp
    common\win32\eCosDialog.cpp
    common\win32\mltview.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\MainFrm.cpp

  More work on failing rules correction.
  Removed CTarget class.
  Added TTListCtrl class for list control tooltips.
  Simplified MLTView tooltips (didn't fix problem though)

1999-11-24  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx,
	  standalone\common\cdl_exec.cxx,
	  common\common\build.cxx:

	Call cygwin_conv_to_win32_path() in Cygwin builds to
	process Cygwin-style directory paths on the ecosconfig
	command line. Such paths are not understood universally
	by the Cygwin tcl library.

1999-11-23  John Dallaway  <jld@redhat.co.uk>

	* standalone\common\ecosconfig.cxx,
	  standalone\common\cdl_exec.cxx,
	  common\common\build.cxx:

	Check for the _MSC_VER macro rather than _WIN32 to
	facilitate cygwin builds.

1999-11-19  Simon FitzMaurice  <sdf@redhat.co.uk>
  
  * common\win32\FailingRulesDialog.cpp

    Use CDL conflicts code for real.  

  * common\win32\RulesList.cpp
    common\win32\RulesList.h

    Add Tooltips

  * common\win32\mltview.h

    Remove usused variable

1999-11-19  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp

  Fixed crash in hardware selection - need to remove items from view first to avoid painting problems.
   
  * standalone\win32\MainFrm.h
   
  Fixed include file name

  * standalone\win32\Configtool.rc
    standalone\win32\res\miscbar.bmp
    common\win32\CTCommonres.h
    standalone\win32\MainFrm.cpp

  Restored help menu bitmaps

  * common\win32\CellEdit.cpp
    common\win32\ComboEdit.cpp

  Removed compilation warnings
  Correctly passed non-special keystrokes to default window handler

1999-11-19  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonres.h

  Remove unwanted references to bitmaps

1999-11-18  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CSHDialog.h
    common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\ControlView.cpp
    common\win32\eCosDialog.h
    common\win32\eCosPropertyPage.h
    common\win32\mltview.cpp
    standalone\win32\CTres.h
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp
    standalone\win32\res\Toolbar.bmp
   
  Add bitmap menu items.

1999-11-17  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\ControlView.cpp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Restore Help->doc home page
  Update tool options labels

1999-11-17  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ControlView.cpp

  Use recommended accelerator for "Properties"

  * common\win32\PropertiesList.cpp
   
  Move grid line up one pixel

  * common\win32\mltview.cpp
    common\win32\mltview.h
   
  Prevent theft of tooltip messages from mainframe
    Add keyboard accessibility for properties, current section\region
   
  * standalone\win32\Configtool.rc

  Adjust view menu accelerators to match previous version more closely

1999-11-17  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\ecosconfig.cxx

  Modify main() to return an appropriate exit code
  should execution fail.

  Modify main() to account for the case where there
  are qualifiers on the command line, but no command.

1999-11-16  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx

  Modify generate_makefile() to perform 'chmod u+w'
  rather than 'chmod 644' on each header file installed.

1999-11-16  Simon FitzMaurice  <sdf@redhat.co.uk>
  *  standalone\win32\Configtool.rc
   
  Fix bug whereby user tools binaries directory dialog browse button did nothing

1999-11-16  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\CellView.cpp
    common\win32\ComboEdit.cpp
    common\win32\ComboEdit.h
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\DoubleEdit.cpp
    common\win32\DoubleEdit.h
    common\win32\IntegerEdit.cpp
    common\win32\IntegerEdit.h
    common\win32\StringEdit.cpp
    common\win32\StringEdit.h
    common\win32\cellview.h
    common\win32\mltview.cpp
    common\win32\mltview.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp
    standalone\win32\OutputView.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
    standalone\win32\res\Toolbar.bmp

  Added accelerator for "Search in" in find dialog
  Added remove button to balance Add in Run Tests.  Derived testtool from CSH-enabled classes
  Improved pane names in font selection dialog
  Removed view->header files in standalone
  Fix editing operations for cells in standalone : new classes CCell and CCellEdit to group related in-cell editing functionality.
    Added "no suggest fixes" choice on tools\options

1999-11-16  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx

  Modify generate_makefile() to perform 'chmod 644' on
  each header file installed. This eliminates problems
  with updating the install tree from a read-only
  repository.

1999-11-16  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.hxx,
    standalone\common\cdl_exec.cxx

  Modify constructor to define savefile and install_prefix
  member variables. Use these variables in each command
  function.

  * standalone\common\ecosconfig.cxx:

  Modify main() to process command qualifiers and
  instantiate a cdl_exec object accordingly.

  Add command line qualifiers to the usage message in
  usage_message().

1999-11-15  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp:

  Modify SetEnabled() to call CdlTransactionBody::body()
  to commit the transaction. This facilitates inference
  and transaction callback processing.

  * common\win32\ControlView.cpp:

  Modify RestoreDefault() to avoid calling
  CdlValuableBody::set_source() on items of flavor None.
  This was triggering an assertion in the latest libCDL
  code.

1999-11-15  Simon FitzMaurice  <sdf@redhat.co.uk>
   
  * common\win32\ConfigToolDoc.h
   
  OnMLTProperties should have been public
   
1999-11-12  Simon FitzMaurice  <sdf@redhat.co.uk>
   
  * common\win32\ConfigItem.cpp
   
  Enumeration image was missing for Double

  * common\win32\ControlView.cpp
    common\win32\ControlView.h

  Remove some obsolete test code, add elipsis to "Unload"
  Correct painting problem on unload

  * common\win32\ConfigToolDoc.h

  Remove obsolete FileNameChanged hint
  Rearranged declarations to reduce preprocessing
  Fix for 901455

  * common\win32\CTPropertiesDialog.cpp
    common\win32\CTCommonDoc.cpp
    common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h
    common\win32\PropertiesView.cpp
    common\win32\PropertiesView.h

  Overhaul including corrections for:
    Incorrect scrolling
    Overpainting of header control
    Empty File property

1999-11-12  John Dallaway  <jld@redhat.co.uk>

  * common\win32\mltview.cpp:

  Increase inter-region spacing to match client area
  border for aesthetic reasons.

  Modify OnUpdate() and OnSize() functions to improve
  the vertical scroll size calculation to account for
  the external text border around each region.

1999-11-11  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CSHDialog.cpp
    common\win32\CSHDialog.h
    common\win32\CSHPropertyPage.cpp
    common\win32\CSHPropertyPage.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\eCosPropertyPage.cpp
    common\win32\eCosPropertyPage.h
  Make HelpID() const 

  * common\win32\CTCommonDoc.cpp
    
  Prevent control view displaying too early

  * common\win32\ControlView.cpp
  Remove Settings context menu item

  * common\win32\RulesView.cpp
  Remove Resolve  context menu item

1999-11-11  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\mltview.cpp
    common\win32\mltview.h
  Add tooltips for section names the exceeed the caption rectangle available
  Decrease size of everything somewhat to allow default display to avoid use of scrollbar
  * common\win32\ctutils.cpp
  Do not check for duplicate paths (so always allowing path fragments to be inserted at beginning)

1999-11-11  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_makefile() to add the package version
  directory in the build tree to the INCLUDE_PATH.

1999-11-11  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify eval_tcl_command() to avoid redirecting stdout
  under Linux. This was affecting the channel reference
  count mechanism resulting in system.h not being written
  out correctly by CdlToplevelBody::generate_config_headers().

1999-11-10  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CSHDialog.cpp
    common\win32\CSHDialog.h
    common\win32\CSHPropertyPage.cpp
    common\win32\CSHPropertyPage.h
    common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\eCosPropertyPage.cpp
    common\win32\eCosPropertyPage.h :
  "What's this?" style help.

1999-11-09  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.hxx,
    standalone\common\cdl_exec.cxx:

  New resolve_hardware_alias() and resolve_template_alias ()
  functions to allow users to specify hardware and templates
  by their aliases on the command line.

1999-11-09  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\FailingRulesDialog.cpp
    standalone\win32\CreditStatic.cpp
    standalone\win32\MainFrm.cpp
  Change various ASSERTs to VERIFYs (caused crash in release build)

1999-11-09  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Add COMMAND_PREFIX variable to top-level makefile.

  Rationalise naming of makefile variables.

1999-11-08  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\BuildOptionsDialog.cpp
    common\win32\CSHDialog.cpp
    common\win32\CSHDialog.h
    common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\CTPropertiesDialog.cpp
    common\win32\FolderDialog.cpp
    common\win32\NewFolderDialog.cpp
    common\win32\NotePage.cpp
    common\win32\RegionGeneralPage.cpp
    common\win32\RegionGeneralPage.h
    common\win32\SectionGeneralPage.cpp
    common\win32\SectionGeneralPage.h
    common\win32\SectionRelocationPage.cpp
    common\win32\SectionRelocationPage.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\notepage.h
    standalone\win32\BinDirDialog.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak
  Extend CSH to property pages (still some anomalies here with the sheet buttons)
  Entered first cut at CSH data

1999-11-08  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\AddRemoveDialog.cpp
    common\win32\AddRemoveDialog.h
    common\win32\BuildOptionsDialog.cpp
    common\win32\BuildOptionsDialog.h
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\CTPropertiesDialog.cpp
    common\win32\CTPropertiesDialog.h
    common\win32\CdlPackagesDialog.cpp
    common\win32\ConfigViewOptionsDialog.cpp
    common\win32\ConfigViewOptionsDialog.h
    common\win32\FolderDialog.cpp
    common\win32\FolderDialog.h
    common\win32\MultiLineEditDialog.cpp
    common\win32\MultiLineEditDialog.h
    common\win32\NewFolderDialog.cpp
    common\win32\NewFolderDialog.h
    common\win32\RulesView.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\eCosHelp.h
    standalone\win32\CTOutputPage.cpp
    standalone\win32\CTOutputPage.h
    standalone\win32\CdlTemplatesDialog.cpp
    standalone\win32\CdlTemplatesDialog.h
    standalone\win32\HeadersDialog.cpp
    standalone\win32\HeadersDialog.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
  Derive dialog classes from CeCosDialog

1999-11-08  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.hxx,
    standalone\common\cdl_exec.cxx:

  New resolve_package_alias() function to allow users
  to specify packages by their aliases on the command
  line.

1999-11-08  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Invoke high-priority custom rules from the top-level
  makefile as for low-priority ones.

1999-11-08  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
  Correct control spacing in folder dialog

    common\win32\CTCommonDoc.cpp
    Work around shell crash w\ URL

    standalone\win32\CTOutputPage.cpp
    standalone\win32\CTOutputPage.h
    common\win32\ConfigViewOptionsDialog.cpp
    common\win32\ConfigViewOptionsDialog.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
  Convert back to dialog mode

1999-11-08  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\ecosconfig.cxx,
    standalone\common\cdl_exec.hxx,
    standalone\common\cdl_exec.cxx:

  Add 'version' command and report non-default package
  versions.

1999-11-05  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
  Do not assert when file does not exist

    common\win32\CTUtils.cpp
  Correct includes for ANSI build

    common\win32\PropertiesList.cpp
    common\win32\CTCommon.rc
    common\win32\CTCommonres.h
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\ConfigToolDoc.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.rc
    standalone\win32\HelpView.cpp
    standalone\win32\MainFrm.h
  More work on failing rules dialog
  Remove FullURL

    common\win32\RulesList.cpp
    common\win32\RulesList.h
  Provide vector and list versions of AddConflicts

    standalone\win32\MainFrm.cpp
  Improve splitter sizes

    common\win32\ConfigViewOptionsDialog.cpp
    common\win32\ConfigViewOptionsDialog.h
    standalone\win32\CTOutputPage.cpp
    standalone\win32\CTOutputPage.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
  Remove remnants of Apply logic

    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
  Use tree control for topological links (parent, child,...)
  Provide deleteitem handler (to sync cell view when packages removed)

    common\win32\SplitterWndEx.h
    common\win32\thinsplitter.cpp
    common\win32\thinsplitter.h
  Prevent split box appearing in control view

1999-11-05  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\RulesView.cpp
    common\win32\RulesView.h :
  Minor fixes

1999-11-05  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CSHDialog.cpp
    common\win32\CSHDialog.h
  Provide default implementation for virtual fns

    common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\FailingRulesDialog.cpp
    common\win32\FailingRulesDialog.h
    common\win32\ResolveConflictsDialog.cpp
    common\win32\ResolveConflictsDialog.h
    common\win32\RulesList.cpp
    common\win32\RulesList.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    standalone\win32\ConfigToolDoc.cpp
  Refine failing rules dialog
  Prevent removed package items causing crash during (for example) paint operations executed within callback

1999-11-05  John Dallaway  <jld@redhat.co.uk>

  * standalone\unix\makefile:

  Add 'clean' target.

  * standalone\common\ecosconfig.cxx:

  Look for the ECOS_REPOSITORY environment variable
  rather than COMPONENT_REPOSITORY.

  * common\common\build.cxx:

  Modify generate_toplevel_makefile() to invoke per-
  package makefiles with the '-r' switch since we do
  not use implicit rules.

1999-11-05  John Dallaway  <jld@redhat.co.uk>

  * standalone\unix\makefile:

  Enable -O2 build optimization.

  * standalone\common\ecosconfig.cxx:

  Modify usage_message() to refer to 'ecosconfig'
  rather than 'pkgconfig'.

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommon.rc
  Tidy conflicts resolution dialog

    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
  Remove m_strName member variable

    common\win32\CTCommonDoc.cpp
  Avoid use of stale pointers after package removal

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
  Fix attribute functions for root node

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
  Remove unnecessary members from CConfigItem

    common\win32\eCosDialog.h
  Remove temp path from include specification


1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak
  Move to HTML Help (define HTMLHelp, add library to link)

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\PropertiesList.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.h
    standalone\win32\Configtool.mak
    standalone\win32\HelpFrame.cpp
    standalone\win32\HelpFrame.h
    standalone\win32\HelpView.cpp
    standalone\win32\HelpView.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\ViewOptions.cpp
  
  Removed Help view in favour of HTML Help (old code still accessible if HOME_GROWN_HELP defined).
  To activate HTMLHelp:
    define HTMLHELP 
    put HtmlHelp.h in your include search path
    put HtmlHelp.lib in your lib search path
    include HtmlHelp.lib in your set of librariess to include in link

  * common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\BuildOptionsDialog.h
  Created non-eCos-specific base class CCSHDialog

  * standalone\win32\Configtool.rc
    common\win32\CTCommonres.h
    common\win32\ConfigViewOptionsDialog.cpp
    standalone\win32\CTres.h
  Removed remaining Apply buttons

1999-11-04  John Dallaway  <jld@redhat.co.uk>

  Changes to rename "pkgconfig" tool->"ecosconfig":

  * standalone\win32\ecosconfig.dsp:

  Add new project file.

  * standalone\win32\pkgconfig.dsp:
   
  Remove old project file.

  * standalone\win32\Configtool.dsw:

  Include ecosconfig project rather than pkgconfig
  project.

  * standalone\unix\makefile:

  Generate ecosconfig rather than pkgconfig.

  * standalone\common\pkgconfig.*:

  Rename files to ecosconfig.* and adjust #include of
  header file.

1999-11-04  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Generate a header at the top of each makefile.

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
    standalone\win32\ConfigToolDoc.cpp
  Correct compilation error (bis)

1999-11-04  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\PropertiesList.cpp
    common\win32\RulesList.cpp
  Remove unreferenced param warnings
    standalone\win32\CTres.h
  Remove duplication definition if IDAPPLY
    standalone\win32\ConfigToolDoc.cpp
  Correct compilation error

1999-11-03  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonres.h
    standalone\win32\CTres.h
  Supply IDs necessary for resource editor

1999-11-03  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\BuildOptionsDialog.cpp
    common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\CTOptionsDialog.cpp
    common\win32\CTOptionsDialog.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\FailingRulesDialog.cpp
    common\win32\NotePage.cpp
    common\win32\PropertiesList.cpp
    common\win32\RegionGeneralPage.cpp
    common\win32\RegionGeneralPage.h
    common\win32\RulesView.cpp
    common\win32\SectionGeneralPage.cpp
    common\win32\SectionGeneralPage.h
    common\win32\SectionRelocationPage.cpp
    common\win32\SectionRelocationPage.h
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\notepage.h
    standalone\win32\CTOutputPage.cpp
    standalone\win32\CTOutputPage.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
    standalone\win32\Configtool.rc
    standalone\win32\HelpView.cpp
    standalone\win32\HelpView.h
    standalone\win32\MainFrm.cpp
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
  General context-sensitive help changes
  (in particular ShowURL() member function in CConfigToolDoc class)
  recent libCDL API change: get_normal_conflicts => get_all_conflicts
  Remove some unused resource IDs

1999-11-03  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.cxx:

  Modify cmd_check() to accommodate recent libCDL API
  change.

1999-11-03  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\pkgconfig.dsp:

  Disable building of the ChangeLog file in the
  'Release' configuration (as for 'Debug').

1999-11-03  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp :
  Remove OptionsSheet

1999-11-03  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_makefile() to eliminate the use of
  .stamp files for individual object files. Use the
  dependency files (*.d) as stamp files.

1999-11-03  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.cxx,
    standalone\common\cdl_exec.hxx,
    standalone\common\pkgconfig.cxx:

  Rename 'report' command to 'check'.

1999-11-02  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\ConfigItem.cpp
    common\win32\stdafx.cpp
    common\win32\eCosDialog.cpp
  HTML help now used uniformly for CSH
   
1999-11-02  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\PropertiesList.cpp
    common\win32\StdAfx.cpp
    common\win32\eCosDialog.cpp
    common\win32\eCosDialog.h
    common\win32\stdafx.h
    standalone\win32\Configtool.cpp
    standalone\win32\HelpView.cpp
    standalone\win32\HelpView.h
  Add HTML help support (if HTMLHELP macro defined)
  Define DocBase() member of document.  This is the folder to which documentation links are relative.

    common\win32\cellview.h
    common\win32\ComboEdit.h
    common\win32\DoubleEdit.h
    common\win32\IntegerEdit.h
    common\win32\target.h
  Remove junk header includes

1999-11-02  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_makefile() to generate a .deps file
  after updating a library archive file.

  * standalone\common\cdl_exec.cxx:

  Modify diagnostic_handler() to format output in a
  manner consistent with the other output-generating
  functions.

  * standalone\win32\pkgconfig.dsp:

  Add the ChangeLog file to the project.

1999-11-01  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ControlView.cpp
    common\win32\ControlView.h :

  Fix for CR 101034 [customized fonts in control view]

1999-11-01  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\pkgconfig.cxx:

  Look for the component repository in the directory
  where the pkgconfig tool is located if the
  COMPONENT_REPOSITORY environment variable is not
  specified.

1999-11-01  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.cxx,
    standalone\common\cdl_exec.hxx:

  Catch and report exceptions.

  * standalone\unix\makefile:

    Specify include\ and lib\ directories by package.

1999-11-01  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\AddRemoveDialog.h
    common\win32\BuildOptionsDialog.h
    common\win32\CTOptionsDialog.h
    common\win32\CTPropertiesDialog.h
    common\win32\CTUtils.cpp
    common\win32\CdlPackagesDialog.h
    common\win32\CellView.cpp
    common\win32\ConfigViewOptionsDialog.h
    common\win32\FailingRulesDialog.h
    common\win32\FindDialog.h
    common\win32\FolderDialog.h
    common\win32\MultiLineEditDialog.h
    common\win32\NewFolderDialog.cpp
    common\win32\RegionGeneralPage.h
    common\win32\ResolveConflictsDialog.h
    common\win32\SectionGeneralPage.h
    common\win32\SectionRelocationPage.h
    common\win32\eCosDialog.h
    common\win32\notepage.h
    common\win32\stdafx.h
    standalone\win32\BinDirDialog.h
    standalone\win32\CTOutputPage.h
    standalone\win32\CdlTemplatesDialog.h
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak
    standalone\win32\Configtool.rc
    standalone\win32\HeadersDialog.h
    standalone\win32\HelpFrame.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\ViewOptions.h
    standalone\win32\splash.cpp :
   
  Include resources directly.  I suspect including resource headers from PCH might have been responsible for
  resource IDs not being found.

  * common\win32\CTCommon.rc

  Restore CDL templates dialog


1999-11-01  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.cxx,
    standalone\common\cdl_exec.hxx,
    standalone\common\pkgconfig.cxx:

  Add new 'report' command which lists CDL conlficts.

  Rename 'load' and 'unload' commands to 'add' and
  'remove' respectively.

1999-10-29  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp : 
  use short form filename for generate_config_headers
  so as to avoid problems with spaces in paths

1999-10-29  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  Remove non-existent files from the project.

1999-10-29  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.dsw:

  Add the pkgconfig project to the workspace.

1999-10-29  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    standalone\win32\Configtool.cpp
  Change default arg values of Chop to false (less error-prone)

  * common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h
  Remove SizeColumns

  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
  Remove more unused stuff

1999-10-29  John Dallaway  <jld@redhat.co.uk>

  * standalone\common\cdl_exec.cxx,
    standalone\common\cdl_exec.hxx,
    standalone\common\pkgconfig.cxx,
    standalone\common\pkgconfig.hxx,
    standalone\unix\makefile,
    standalone\win32\pkgconfig.dsp:

  Initial check-in of eCos command line config tool sources.

  * common\common\build.cxx:

  Modify eval_tcl_command() to use \dev\null or NUL: as appropriate.

  * common\common\flags.cxx:

  Modify srting_to_list() parameter list to avoid compilation
  error with GCC.

1999-10-29  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc
    common\win32\CTCommonDoc.cpp
    common\win32\CTCommonres.h
    common\win32\CTPropertiesDialog.cpp
    common\win32\CTPropertiesDialog.h
    common\win32\ControlView.cpp
    common\win32\PropertiesView.cpp
    common\win32\PropertiesView.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    common\win32\PropertiesList.cpp
    common\win32\PropertiesList.h
    common\win32\ResolveConflictsDialog.cpp
    common\win32\ResolveConflictsDialog.h
    common\win32\RulesList.cpp
    common\win32\RulesList.h
  Migrate list view specialization from views (CPropertiesView and CRulesView) to the controls
  (CPropertiesList and CRulesList).  
  Introduce prototype conflicts resolution dialog (not functional yet).  

1999-10-29  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_makefile() and
  generate_toplevel_makefile() to copy all necessary non-config
  header files into the install tree in an initial 'make
  headers' phase.

  Move the common '.PHONY' declaration into rules.mak.

1999-10-28  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommon.rc :
  Fix id of list control

1999-10-28  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\BuildOptionsDialog.cpp
    common\win32\BuildOptionsDialog.h
  Experiment with framework for HtmlHelp

  * common\win32\RegionGeneralPage.h
  Remove kludge for not-found resource ID (rebuild all fixes)

  * standalone\win32\ConfigToolDoc.cpp
  Initialize m_nFindWhere

  * standalone\win32\Configtool.cpp
    standalone\win32\Configtool.h
  Remove some unused stuff

  * standalone\win32\HelpFrame.cpp
    standalone\win32\HelpFrame.h
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
  Migrate URL status bar pane to help frame

  * common\win32\RulesView.cpp
    common\win32\RulesView.h
  Experiment with conflict resolution

1999-10-28  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ConfigItem.cpp

  Change "NYI" to "Not yet implemented" (CR 901460)

1999-10-28  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify cygpath() to accommodate repository and install
  tree paths containing spaces by converting to short
  file paths (Win32 only).

  Modify generate_makefile() to rationalise the naming of
  timestamp files.

1999-10-27  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_makefile() to handle tests specified by
  their source files.

  * common\common\build.hxx:

  Add get_tests() declaration.

1999-10-27  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Modify generate_toplevel_makefile() to handle the case of an
  empty command prefix correctly.

  * common\win32\memmap.cpp:

  Modify export_files() to export memory region info to
  the memory layout header file.

1999-10-27  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\CellView.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h

  Sort out generation of header files as necessary for creation of build tree
  Introduce helper functions:
  CConfigItem::GetCdlValuable() - returns cdl item cast to CdlValuable
  CUtils::CopyFile - copies without touching dest file if same as source
  CUtils::Wpath - moved from CProject
  Remove some unused crud from main frame class

1999-10-27  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx:

  Create the 'include' directory in the install tree
  explicitly.

1999-10-27  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx,
    common\common\build.hxx:

  Modify generate_build_tree() to accommodate backslashes in
  directory arguments under Win32.

1999-10-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\MainFrm.cpp :

  Start to use make file generation

1999-10-26  John Dallaway  <jld@redhat.co.uk>

  * common\common\build.cxx,
    common\common\build.hxx,
    standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  New files providing the initial implementation of
  build tree and makefile generation from CDL data.

1999-10-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp

  Correct problem whereby some tests were not being correctly located.

1999-10-26  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
   
  Adapt to changes for make file generation
  Traverse only package directories looking for tests

  * common\win32\FileName.cpp

  Correct trace output

1999-10-22  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CellView.cpp
    common\win32\ComboEdit.cpp
    common\win32\ComboEdit.h
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\DoubleEdit.cpp
    common\win32\DoubleEdit.h
    common\win32\FileName.cpp
    common\win32\IntegerEdit.cpp
    common\win32\IntegerEdit.h
    common\win32\StringEdit.cpp
    common\win32\StringEdit.h
    common\win32\cellview.h
    common\win32\thinsplitter.cpp
    standalone\win32\CTOutputPage.cpp
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.ma?
    standalone\win32\Configtool.rc
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\ViewOptions.h
  Remove unused resources
  Localize information regarding kind of cell in CCellView and use runtime class information to represent it.
  Remove unused functions from CConfigItem
  Remove inapplicable items from View\Settings and Tools\Options

1999-10-21  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\RulesView.cpp
    common\win32\RulesView.h
    common\win32\SplitterWndEx.cpp
    common\win32\SplitterWndEx.h
    common\win32\thinsplitter.cpp
    common\win32\thinsplitter.h
    standalone\win32\BuildOptsPage.cpp
    standalone\win32\BuildOptsPage.h
    standalone\win32\CTres.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.h
    standalone\win32\Configtool.mak
    standalone\win32\Configtool.rc
    standalone\win32\HelpView.cpp
    standalone\win32\HelpView.h
    standalone\win32\MLTFrame.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\RulesFrame.cpp
    standalone\win32\RulesFrame.h
    standalone\win32\SplitterWndEx.cpp
    standalone\win32\SplitterWndEx.h
    standalone\win32\ViewOptions.cpp
    standalone\win32\res\Toolbar.bmp
    standalone\win32\res\toolbar1.bmp :
  In standalone tool, make help window floating, other windows splitter panes.
  Make splitter placement data-driven
  Rules window columns to size propoertionately to window.
  Remove BuildOptsPage
  Remove CPackage class
  Move SplitterWndEx from standalone to common (CThinSplitter now derives from it)

1999-10-20  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  Remove non-existent files from the project.

  Add eCosTestDownloadFilter.h to the project.

1999-10-19  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify CdlTransactionHandler() to do nothing if a
  CdlInterface node has become active or inactive.

1999-10-19  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\ConfigToolDoc.cpp
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h

  Make build info available in document (member BuildInfo())
  Introduce UpdateeCosProject() member as place to update build info

  * standalone\win32\ViewOptions.cpp
  Correct typo

  * standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak

  Add flags.cxx,.hxx
  Introduce new build options dialog class

  * standalone\win32\CTres.h
    standalone\win32\Configtool.rc

  Introduce new build options dialog class

1999-10-18  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    standalone\win32\MainFrm.cpp
    common\win32\FileName.cpp

  [mostly] eliminate changing directory, which is dangerous in a multithreading environment
   
  * common\win32\FileName.cpp :
   
  Use shell API to calculate relative paths

  * common\win32\PropertiesView.h
    common\win32\PropertiesView.cpp

  Remove "display" as property and need for count of properties

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak :
   
  add shlwapi.lib to link
   
1999-10-18  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ControlView.cpp:

  Modify ShowPopupMenu() to enable the 'Restore Default' menu item
  for any config item if the item or any of its descendants have a
  non-default value source.

1999-10-15  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTCommonDoc.cpp : 
  
  Do not mention an empty repository name

1999-10-13  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ControlView.cpp:

  Modify ShowPopupMenu() to add doc and header menu items
  if the config item has either a data or bool part or
  both.

1999-10-13  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify NewMemoryLayout() take the directory containing
  the .mlt files as its parameter rather than the prefix
  to a "pkgconf" directory.

  Modify SwitchMemoryLayout(), OnOpenDocument(),
  OnNewDocument(), OnConfigurationRepository() and
  OnBuildTemplates() to accommodate the above change to
  NewMemoryLayout().

1999-10-13  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Add new MLTDir() function to return the directory in
  which to save .mlt files.

  Modify SelectPackages() and SelectTemplate() to
  accommodate the above change to NewMemoryLayout().

  Modify SaveMemoryMap() and CopyMLTFiles() to place .mlt
  files in a directory outside the build and install trees
  by calling MLTDir().

1999-10-13  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\ConfigItem.cpp : 
  Correct calculation of filename

1999-10-13  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ControlView.cpp
    common\win32\PropertiesView.cpp
    common\win32\PropertiesView.h : 
  Add ViewURL() and ViewHeader() to CConfigItem class and use these in control and properties views.

1999-10-13  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
  Fix problem of tree not being populated when repository already open
  Migrate m_arstrFiles.RemoveAll() calls to DeleteContents() for standalone

  * common\win32\ControlView.cpp : 
    
  some hacky debugging for window persistence

    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h : 
    
  protect status bar creation with boolean

1999-10-13  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\MainFrm.cpp:

  Modify PrepareEnvironment() and OnToolsPaths() to
  use CConfigToolApp::m_arstrToolChainPaths rather than
  CConfigToolDoc::arstrToolChainPaths.

  * common\win32\CTCommonDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Remove obsolete ChooseDefaultHal() and m_arstrToolChainPaths
  members.

1999-10-13  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify DeleteContents() to save tools bin directories
  by calling CWinApp::WriteProfileString() rather than
  ::WriteProfileString().

  * standalone\win32\MainFrm.cpp:

  Modify PrepareEnvironment() and OnUsertoolsPaths() to
  use CConfigToolApp::m_strUserToolsDir rather than
  CConfigToolDoc::m_strUserToolsDir.

  * common\win32\ConfigtoolDoc.h:

  Remove obsolete m_strUserToolsDir member variable. The
  user tools bin directory is now stored in the
  CConfigToolApp class.

1999-10-11  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\ConfigTool.dsp
    standalone\win32\ConfigTool.make : 
    
  add eCosTestDownloadFilter.cpp

1999-10-11  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify OnBuildTemplates() to convert the selected template STL
  string to a CString.

  * common\win32\CTCommonDoc.cpp:

  Modify SelectTemplate() to convert the selected template STL
  string to a CString.

1999-10-11  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  Remove all references to the deprecated Tcl 8.1 headers and
  libraries.

1999-10-08  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  Link against Tcl 8.2.1.

1999-10-08  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp : 
    
  avoid crash if attempt is made to access status bar early (before mainframe exists)

1999-10-08  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h : 
    
  Add status pane support

1999-10-08  John Dallaway  <jld@redhat.co.uk>

  * common\win32\OutputView.cpp,
    common\win32\OutputView.h:

  Override CEditView::OnEditChange() to prevent setting
  of the document modified flag when the output window
  contents changes.

1999-10-08  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify GetDefaultHardware() to use the eCos version registry
  key with the greatest value.

1999-10-08  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify OnBuildTemplates() to construct the memory layout
  directory correctly now that m_strPackagesDir is a full
  directory path.

1999-10-07  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify SaveMemoryMap() and CopyMLTFiles() to ensure that
  both the default MLT export files and any modified ones
  are copied into both <build tree>\pkgconf and
  <install tree>\pkgconf\include.

1999-10-07  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.cpp:

  Modify Log() function to fix memory leak.

1999-10-07  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp:

  Modify HasRadio() function to use the recently
  implemented CdlValuableBody::get_widget_hint() function.

1999-10-06  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    common\win32\ConfigToolDoc.h:

  Add new CurrentTestingIdentifier() function which
  returns the string value of the
  CYGTST_TESTING_IDENTIFIER cdl_option.

  * standalone\win32\MainFrm.cpp,

  Modify OnRunSim()\OnRunTests() to use the string value
  of the CYGTST_TESTING_IDENTIFIER cdl_option as the test
  target by calling
  CConfigtoolDoc::CurrentTestingIdentifier().

1999-10-05  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CdlPackagesDialog.cpp,
    common\win32\CdlPackagesDialog.h:

  Add new UpdateHardwareSelectionFlag() function to set
  a Boolean member variable according to whether a hardware
  package is currently selected.

  Modify OnSelchangeList1() and OnSelchangeList2() to call
  the new UpdateHardwareSelectionFlag() function.

  Add new HardwarePackageMessageBox() function to issue a
  warning message box.

  Modify OnDblclkList1(), OnDblclkList2(), OnAdd() and
  OnRemove() to check the hardware selected flag and warn
  the user if it is set by calling HardwarePackageMessageBox().

1999-10-05  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CdlPackagesDialog.cpp:

  Modify UpdateVersionList() to fill the version combo box
  with all versions held in common by multiple selected
  packages.

  Modify OnSelchangePackageVersion() to modify the version of
  all selected packages.

1999-10-04  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CdlPackagesDialog.cpp:

  Modify OnSelChangePackageVersion() and UpdateVersionList() to
  work with both package listboxes.

  * standalone\win32\Configtool.rc,

  Extend the version combo box to full width in the package
  selection dialog box.

1999-10-01  John Dallaway  <jld@redhat.co.uk>

  * common\win32\memmap.cpp:

  Modify edit_memory_section() to accommodate a relocating memory
  section changing to non-relocating where a relocating memory
  section is to follow it.

1999-10-01  John Dallaway  <jld@redhat.co.uk>

  * common\win32\PropertiesView.cpp:

  Modify DblClk() to restore correct function of double-clicking
  on the documentation URL in the standalone config tool.

1999-09-30  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify SaveProfileSettings() to re-establish repository path
  persistence which had disappeared in mysterious circumstances.

1999-09-30  John Dallaway  <jld@redhat.co.uk>

  * common\win32\memmap.cpp,
    common\win32\memmap.h:

  Modify edit_memory_section() to check for a non-relocating
  section changing to relocating where the final location moves
  from a read_only region to a read_write region and there is a
  following non-relocating section. Report and reject such edits
  because they result in a non-relocating section being defined as
  following the initial location of a relocating region. [PR 19797]

  * standalone\win32\CTres.h,
    standalone\win32\Configtool.rc,

  Add a resource string containing the error message for the
  condition described above.

1999-09-30  John Dallaway  <jld@redhat.co.uk>

  * common\win32\memmap.cpp:

  Modify add_relative_sections_to_list() to avoid skipping
  non-relocating relative sections which follow the final
  location of a relocating relative section [PR 19799].

1999-09-29  John Dallaway  <jld@redhat.co.uk>

  * common\win32\memmap.cpp:

  Modify export_files() to use localtime() rather than
  gmtime() such that the timestamp in exported files
  is corrected for daylight saving time. [CR 100663]

1999-09-29  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Reimplement CurrentStartup() using the CYG_HAL_STARTUP
  macro.

  * standalone\win32\MainFrm.cpp,

  Modify OnRunSim()\OnRunTests() to derive a test target
  identifier of the form "<template>-<startup>" from the
  name of the selected hardware template and the macro
  CYG_HAL_STARTUP. Check the validity of the identifier
  by calling CeCosTest::IsValid().

1999-09-29  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CdlPackagesDialog.cpp:

  Modify UpdateVersionList() to disable the version
  combo box in the package selection dialog if there
  is only one installed version of the selected package.

  * common\win32\CTCommonDoc.cpp:

  Modify SelectPackages() to present hardware packages
  in the package selection dialog and to issue a warning
  message box if no package is providing the linker script
  and memory layout macro definitions.

1999-09-28  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\Configtool.rc,
    standalone\win32\CTres.h,

  Add a version selection combo box to the packages dialog.

  * common\win32\CTCommonDoc.cpp:

  Modify SelectPackages() to pass the current version
  string of each package to the packages dialog and
  switch to a new version on dismissal of the dialog
  as appropriate.

  * common\win32\CdlPackagesDialog.cpp,
    common\win32\CdlPackagesDialog.h:

  Add new UpdateVersionList() function to fill the new
  version combo box as necessary.

  Override OnAdd(), OnRemove(), OnDblclkList1() and
  OnDblclkList2() message handlers to call the new
  UpdateVersionList() function.

  Override Insert() to setup an array of version strings.

  Add new GetVersion() function to extract the user-
  selected package versions.

  * common\win32\CellView.cpp:

  Modify InCell() and OnDraw() to check for package items
  explicitly and present their values in a non-editable
  manner.

1999-09-27  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Modify AddItem() to dispense with the CPackage class for
  the eCos plug-in. Keep this class in the standalone
  config tool for now until we finalise plans for the
  build flags.

1999-09-27  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Remove obsolete loop from AddAllItems() which removed
  CPackage objects for packages which were not loaded.
  There are no longer any such objects.

  Changes to present package version information in the
  cell view:

  * common\win32\ConfigItem.cpp:

  Modify ItemTypeOf() to return 'String' for a package item
  rather than 'None'.

  Modify StringValue() to return the value of a package item.

  * common\win32\ControlView.cpp:

  Modify AdjustItemImage() to check for packages when the item
  type is 'String' rather than 'None'.

1999-09-27  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Modify AddItem() to deduce the target name from CDL option
  CYGBLD_LINKER_SCRIPT and to create the CPackage objects
  directly.

  Remove obsolete GetPackageData() function.

1999-09-24  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp : 
    
  "eCos" adjective added to prompt for repository dialog (CR 101081)

1999-09-24  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\CTPropertiesDialog.cpp
    common\win32\CTPropertiesDialog.h
    common\win32\CTUtils.cpp
    common\win32\CTUtils.h
    common\win32\CellView.cpp
    common\win32\ConfigItem.cpp
    common\win32\ConfigItem.h
    common\win32\ConfigToolDoc.h
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\DoubleEdit.h
    common\win32\FindDialog.h
    common\win32\IncludeSTL.h
    common\win32\IntegerEdit.cpp
    common\win32\IntegerEdit.h
    common\win32\Package.h
    common\win32\StringEdit.h
    common\win32\cellview.h
    common\win32\stdafx.h
    standalone\win32\BinDirDialog.cpp
    standalone\win32\BuildOptsPage.cpp
    standalone\win32\BuildOptsPage.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\HeadersDialog.cpp
    standalone\win32\HelpView.cpp
    standalone\win32\MLTFrame.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\MainFrm.h
    standalone\win32\OutputView.cpp : 
  rearranged includes to reduce dependencies on header files
  CConfigItem::ItemIntegerType becomes ItemIntegerType and moves to stdafx.h
  CConfigToolDoc::ItemTypeOf moves to (static member of) CConfigTool

  Various functions of projectmanager move to project
  Corrected call of OnSaveDocument() with null argument


    standalone\win32\dirdocmgr.cpp, h : 
    
  removed

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Remove obsolete m_strPlatform member variable. The concept of
  a platform is now embodied in the CDL 'target'.

  * common\win32\CTCommonDoc.cpp:

  Modify AddItem() to remove the processing of 'platform'
  packages.

  Modify SetValue() to check whether the memory layout will
  change via the CYG_HAL_STARTUP macro name.

  Convert CurrentPlatform() into a dummy function returning
  an empty string for now.

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify parameter passed to NewMemoryLayout() to remove duplicate
  repository path since m_strPackagesDir is now a full path.

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify OpenRepository() to report the most recent parsing
  error when loading the default hardware template to a
  message box in case the output pane is not available.

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify OpenRepository() to show repository path in status bar.

  * standalone\win32\ConfigtoolDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Remove obsolete override of SaveModified().

  Modify OnSaveDocument() to show document path in status bar.

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify OpenRepository() to clear any previously-specified
  document file name. This allows reloading of the MRU config
  file having just switched repository.

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify OnConfigurationRepository() to reset the document title
  the correct way, using CDocTemplate::SetDefaultTitle()

  * standalone\win32\Configtool.cpp,
    standalone\win32\Configtool.h:

  Remove obsolete override of AddToRecentFileList().

1999-09-23  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify OnNewDocument() to force the existing repository
  to be re-opened.

  Modify OnConfigurationRepository() to prompt for saving of
  changes to the existing configuration and to refresh the
  memory layout and failing rules views when the new repository
  has been loaded and to reset the frame title.

  * common\win32\CTCommonDoc.cpp:

  Modify OpenRepository() to catch and report exceptions when
  loading the default template.

1999-09-21  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    standalone\win32\ConfigtoolDoc.cpp:

  Ensure that all calls to libCDL functions which parse input
  files catch and report exceptions of type CdlStringException.

1999-09-21  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp:

  Modify ConfigurationFile() to return the document path name
  (which is now a file rather than a directory).

  * common\win32\ConfigToolDoc.h:

  Promote GetPathName() to a public member function.

1999-09-20  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h : 
    
  adjust decls for standalone case

1999-09-20  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\ConfigToolDoc.h
    standalone\win32\ConfigToolDoc.cpp :
  Move GenerateHeaders() from ProjectManger to document class
  Call file-saving operations appropriately (generally in OnSaveDocument())
  Responsibility for attaching to eCos project removed from document - now in caller
  Set install and build trees only after document opened
  Implement rule ordering using priority fields

1999-09-20  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigToolDoc.cpp,
    common\win32\ConfigtoolDoc.h:

  Modify OnOpenDocument() and OnSaveDocument() to use a
  save file passed in the lpszPathName parameter rather than
  a folder name.

  Use base implementation of SetTitle() function.

  Override SetModifiedFlag() to force a refresh of the frame
  window title by calling UpdateFrameCounts().

  Modify SetPathName() to calculate build and install folders
  from the save file name.

  * standalone\win32\Configtool.cpp:

  Modify the constructor to use the default CDocManager.

  * standalone\win32\Configtool.rc:

  Modify IDR_MAINFRAME string to specify eCos Configuration
  Files (*.ecc).

  * standalone\win32\MainFrm.cpp,
    standalone\win32\MainFrm.h:

  New override of CFrameWnd::OnUpdateFrameTitle() to manage
  'document modified' asterisk.

  Use base implementation of OnUpdateMRUList().

  * common\win32\ControlView.cpp:

  Modify OnInitialUpdate() to no longer set frame window title.

  Modify AdjustItemImage() to no longer force a refresh of the
  frame window title. This is now performed in
  CConfigToolDoc::SetValue() via SetModifiedFlag().

  * standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  No longer build the obsolete directory document manager class
  (CDirDocManager) in dirdocmgr.cpp.

1999-09-20  Simon FitzMaurice  <sdf@redhat.co.uk>
    standalone\win32\ConfigTool.cpp: 
    
  correct compilation error

    common\win32\AddRemoveDialog.cpp
    common\win32\CTCommonDoc.cpp
    common\win32\CTUtils.cpp
    common\win32\FileName.cpp
    common\win32\subprocess.cpp
    standalone\win32\CreditStatic.cpp: 
    
  use of deleteZA

1999-09-20  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigToolDoc.cpp:

  Modify OnOpenDocument() to ensure that the CDL transaction
  callback is reenabled following failure to open the new
  document.

  * common\win32\CTCommonDoc.cpp:

  Modify OpenRepository() to ensure that the CDL transaction
  callback is reenabled following failure to open the new
  repository.

1999-09-17  Simon FitzMaurice  <sdf@redhat.co.uk>
    standalone\win32\ConfigToolDoc.cpp : 
    
  Remove unneeded #includes

1999-09-17  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    standalone\win32\ConfigtoolDoc.cpp : 
  CurrentLinkerScript() made common.
  Remaining fns in non-common docs reordered to ease diffs.

1999-09-17  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigToolDoc.cpp,
    common\win32\ConfigToolDoc.h:

  Remove obsolete functions and their references:
   
  RecalculateFileList()
  CreateNotificationThread()
  DestroyNotificationThread()

  * standalone\win32\splash.cpp:

  Fix compilation error relating to deleteZ().

1999-09-17  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    standalone\win32\ConfigToolDoc.cpp : 
    
    AddAllItems() becomes common

1999-09-17  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\CellView.cpp
    common\win32\ConfigItem.cpp
    common\win32\FolderDialog.cpp
    common\win32\memmap.cpp
    common\win32\messagebox.cpp
    common\win32\stdafx.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.cpp
    standalone\win32\HelpView.cpp
    standalone\win32\MainFrm.cpp
    standalone\win32\splash.cpp : 
    
    Use deleteZ and deleteZA macros; migrate AddItem() to common ConfigToolDoc file

1999-09-16  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ProperitesView.cpp:

  Modify FillCtrl() to limit the length of property value strings
  since the list control appears to truncate the displayed string
  to 256 characters. This change speeds up FillCtrl() considerably
  when a CdlProperty has a large number of arguments.

1999-09-16  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTCommonDoc.cpp,
    standalone\win32\ConfigtoolDoc.h:

  Rename CdlErrorHandler() to CdlParseErrorHandler() and
  introduce new handlers CdlLoadErrorHandler() and
  CdlLoadWarningHandler().

  Modify SetValue (CConfigItem &, double) to set the MFC
  document modified flag.

  * standalone\win32\ConfigtoolDoc.cpp,

  Reference renamed CdlParseErrorHandler() function.

  * common\win32\ControlView.cpp:

  Modify OnUpdate() to hardcode the tree item height (16) for
  now. This works around an issue regarding the incorrect
  spacing of grid lines when a 'large' display font is
  selected.

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify OnCloseDocument() to only delete the CDL data
  structures if they have been created.

  Modify OnOpenDocument() to load a CDL save file.

  Modify OnNewDocument() to quit the application if the
  user refuses to specify a valid repository.

  Modify OnSaveDocument() to output a CDL save file.

  Modify OpenRepository() to allow reverting to the previous
  repository until sanity checks have been performed on
  the new one.

  Modify ReadOptions() to do nothing. Build options will
  eventually be obtained by another route.

  Modify IsModified() to call the base implementation.

  Modify AddAllItems() to clear the MFC document modified flag.

1999-09-13  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    standalone\win32\ConfigToolDoc.cpp : 
    
  more commonality

1999-09-13  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CTCommonDoc.cpp
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    standalone\win32\ConfigToolDoc.cpp
    standalone\win32\Configtool.dsp
    standalone\win32\Configtool.mak
    standalone\win32\ConfigtoolDoc.h : 
    
  Move common sections of configtooldoc to shared file

1999-09-10  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\FileName.cpp : 
    
  return abs path name if comparison cannot be made (e.g. different drives)

1999-09-09  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,

  Modify GetPackageData() to supress obsolete warning messages
  concerning missing include\pkgconf\*.h header files.

  Modify NewMemoryLayout() in avoid importing linker-defined
  memory section names if no linker script has been found.

1999-09-07  John Dallaway  <jld@redhat.co.uk>

  * Configtool.dsw:

  Use common cdl project with ANSI build configurations.

1999-09-06  Simon FitzMaurice  <sdf@redhat.co.uk>
    common\win32\CellView.cpp
    common\win32\ControlView.cpp
    common\win32\ControlView.h
    common\win32\cellview.h : 
    
  Add keyboard interface to tab from cell to cell, also '<' and '>' for integer "bumping"

    common\win32\DoubleEdit.cpp
    common\win32\IntegerEdit.cpp : 
    
  allow partial value "-"

    standalone\win32\BuildOptsPage.cpp
    common\win32\PropertiesView.cpp
    common\win32\RulesView.cpp 
    standalone\win32\MainFrm.cpp : 
    
  use correct macros for decoding GetMessagePos() result

1999-09-02  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp:

  Modify all versions of CConfigItem::SetValue() to
  force the current boolean state when changing config
  items of CDL type booldata. This prevents a possible
  change of boolean state if the value source changes.

1999-09-02  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ControlView.cpp,
    common\win32\ControlView.h:
  Eliminate beeping when keyboard used.

1999-08-18  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ControlView.cpp,
    common\win32\ControlView.h:

  Rename Enabled() function to IsActive() for
  consistency of nomenclature.

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Modify SetEnabled() to change the selected radio
  button of a radio button group in a single CDL
  transaction.

  * common\win32\CTUtils.cpp:

  Modify DoubleToStr() to output the correct
  precision for a double using DBL_DIG.

1999-08-17  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,

  Modify CdlTransactionHandler() to refresh the control
  view when the value source of a config item changes
  to ensure that the 'not default' asterisk is shown
  for _all_ items in a group of radio buttons when a new
  item is selected, even if the value of a specific
  item has not changed.

1999-08-17  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Modify Value() to support the CDL BoolData flavor.

  Implement HasRadio() by searching for a clue in the
  config item description as a hack to test radio
  button support.

  Modify SetEnabled() to disable other config items in
  a radio button group when a new item is selected.

  Make HasBool() a constant function.

  * common\win32\ControlView.cpp,
    common\win32\ControlView.h:

  Modify AdjustItemImage() to use radio icons as appropriate.

  Modify RestoreDefault() to restore the default value of
  all config items with radio buttons in a group.

  Modify BumpItem() to prevent disabling a config item
  with a radio button in this way.

  * standalone\win32\ConfigtoolDoc.cpp,

  Restore CheckRadios() and modify to provide a warning if
  the default states of config items with radio buttons
  is inconsistent.

  Modify AddAllItems() to invoke CheckRadios().

1999-08-17  John Dallaway  <jld@redhat.co.uk>

  * common\win32\RegionGeneralPage.h:

  Specify dialog resource ID directly to workaround
  weirdness with IDD_REGION_GENERAL macro.

1999-08-16  John Dallaway  <jld@redhat.co.uk>

  Support for CDL flavor BoolData:

  * common\win32\CellView.cpp:

  Modify OnDraw() to grey the cell text for
  disabled BoolData items.

  * common\win32\ConfigItem.cpp:

  Modify StringValue() to return a data string
  for BoolData items as for Data items.

  Modify SetEnabled() to enforce the current data
    value as the user value when enabling\disabling
  BoolData items to avoid current data value changes.

  * common\win32\ControlView.cpp:

  Modify BumpItem() to distinguish between boolean
    toggle requests (nInc == 0) and data increment\
  decrement requests (nInc != 0).

  Modify OnLButtonDown() to distinguish between
  toggling a boolean item and incrementing a
  data item.

  Modify OnChar() to to distinguish between
  toggling a boolean item (using space bar) and
  incrementing\decrementing a data item (using
  +\- keys).

  Modify AdjustItemImage() to grey the checkbox of
  disabled Bool and BoolData items.

1999-08-16  John Dallaway  <jld@redhat.co.uk>

  Preparation for supporting CDL flavor BoolData:

  * common\win32\ConfigItem.cpp, ConfigItem.h:

  Remove enum types Boolean and Radio since the
  presence of a boolean state is now independent
  of the config item data type. Modify member
  functions accordingly.

  New functions SetEnabled(), HasRadio() and
  HasBool() to get\set boolean information via
  CDL calls. HasRadio() is a dummy function for
  now.

  * common\win32\CellView.cpp:

  Modify GetCellValue() to remove references to
  Boolean and Radio config item types.

  * common\win32\ControlView.cpp:

  Modify AdjustItemImage() and BumpItem() to use
  CConfigItem::HasBool() and remove other references
  to Boolean and Radio config item types.

  * common\win32\PropertiesView.cpp,
    common\win32\PropertiesView.h:

  Modify FillCtrl() to present an 'Enabled' property
  if the config item has boolean data (in addition
  to the 'Value' property).

  Modify OnUpdate() to update the 'Enabled' property
  field when a value has changed.

  Remove references to Boolean and Radio config item
  types in other member functions.

  * standalone\win32\MainFrm.cpp,

  Remove references to Boolean and Radio config item
  types in member functions.

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h,

  New SetEnabled() member function to set a boolean
  config item.

  Modify ItemTypeOf() to return CConfigItem::None for
  CDL items of flavor Bool. Such items are now tested
  using CConfigItem::HasBool().

  Remove references to Boolean and Radio config item
  types in other member functions.

1999-08-13  John Dallaway  <jld@redhat.co.uk>

  * common\win32\CTUtils.cpp:

  Modify DoubleToStr() to use "%g" rather than "%e" to
  format doubles.

  * standalone\win32\res\bitmap2.bmp,
    common\win32\ControlView.cpp:

  Add new icon for config items of type double and
  modify AdjustItemImage() to make use of it.

  * standalone\win32\Configtool.rc:

  Suppress the erroneous generation of a #include for
  TestTool.rc by the resource editor.

1999-08-13  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CTUtils.cpp : no need for UNICODE filtering
  * standalone\win32\Configtool.dsp,.mak : use common version of properties

1999-08-13  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h,

  Make CdlTransactionHandler() a class member.

  Modify CurrentLinkerScript() to trap missing
  CYGBLD_LINKER_SCRIPT option.

  Modify SwitchMemoryLayout() to eliminate duplicate
  calls to mem_map class member functions.

1999-08-13  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp, common\win32\ConfigItem.h:

  New member variable m_bPackage and IsPackage() access function
  to denote package config items in preparation for retiring
  the CPackage class.

  * common\win32\ControlView.cpp:

  Modify AdjustItemImage() to use CConfigItem::IsPackage().

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h,

  Implement revised scheme for obtaining memory layout and
  linker script files using CDL options CYGHWR_MEMORY_LAYOUT
  and CYGBLD_LINKER_SCRIPT respectively. Use new member
  functions CurrentMemoryLayout() and CurrentLinkerScript()
  when switching memory layout.

1999-08-12  Simon FitzMaurice  <sdf@redhat.co.uk>
  * tools\configtool\common\win32\ControlView.cpp : 
  
  "options" -> "settings" in context menu and introduce separator

  * tools\configtool\common\win32\FileName.cpp : do not attempt to create c: etc..
  * tools\ecostest\common\wcharunix.h : add mkdir compatibility macro
  * tools\testtool\win32\RunTestsSheet.cpp,h : size correctly in modeless case and simulate WM_KICKIDLE

1999-08-12  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\cdl.dsp,
  * standalone\win32\cdl.dsp,?
    standalone\win32\cdl.mak:

  Further revision missed in previous commit.

1999-08-12  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\cdl.dsp,
    standalone\win32\cdl.mak,
    standalone\win32\cdl.sh:

  Accommodate revised configure switches in CDL custom build
  rule.

1999-08-12  Bart Veer  <bartv@redhat.co.uk>

  * Makefile.in:
  * acinclude.m4:
  * aclocal.m4:
  * configure.in:
  * configure:
  * config.h.in:
  First attempt at autoconfiscating the configtool.

1999-08-11  John Dallaway  <jld@redhat.co.uk>

  Implementing support for config items of type double:

  * common\win32\DoubleEdit.cpp,
    common\win32\DoubleEdit.h,
    standalone\win32\Configtool.dsp,
    standalone\win32\Configtool.mak:

  New CDoubleEdit class to provide appropriate edit mask for
  editing double values.

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  New CConfigItem::Double config data type.

  New member functions SetValue(double), DoubleValue() and
  DoubleDefaultValue().

  * common\win32\CTUtils.cpp,
    common\win32\CTUtils.h:

  New member functions StrToDouble() and DoubleToStr().
   
  * common\win32\ControlView.cpp,
    common\win32\PropertiesView.cpp,
    common\win32\CellView.cpp:

  Accommodate new CConfigItem::Double config data type.

    standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h:

  New SetValue(CConfigItem &, double) member function.

  Modify ItemTypeOf() to return CConfigItem::Double when
  a config option has a legal value range of type double.

  Modify SetValue (CConfigItem &, const CString, bool) to
  accommodate double values.

1999-08-09  Simon FitzMaurice  <sdf@redhat.co.uk>
  * tools\ResourceTool\win32\ResourceToolDlg.h
    tools\ResourceTool\win32\StdAfx.h
    tools\Utils\win32\properties.cpp,h : Make windows-independent (move to common some time)
    tools\ecostest\win32\*.dsp,*.mak : use properties class
    tools\testtool\win32\RunTestsSheet.cpp
    tools\testtool\win32\RunTestsSheet.h
    tools\ecostest\common\TestResource.cpp,h 
    tools\ecostest\common\ResourceServer.cpp,h 
    tools\ecostest\common\eCosTest.cpp
    tools\ecostest\common\eCosTestUtils.cpp,h : Use common properties class

1999-08-06  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\ConfigTooldoc.h : correct misplaced edit

1999-08-06  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\ControlView.cpp: UNICODEd trace string
  * common\win32\IncludeSTL.h: explicit pragma warning so as to be able to
  use level 4
  * tools\configtool\common\win32\PropertiesView.cpp
    tools\configtool\common\win32\RulesView.cpp
    standalone\win32\CdlTemplatesDialog.h
    common\win32\stdafx.h : move include of STL string from PCH to using files
  * testtool\win32\RunTestsSheet.cpp : correct dereference of view **

1999-08-06  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,

  Report CdlStringException exceptions raised while
  loading the initial CDL configuration.

1999-08-06  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\CdlTemplatesDialog.cpp,

  Modify OnInitDialog() to handle the case where no
  template is selected on dialog initialisation
  (due to a previous error). Select the first template
  in such cases.

1999-08-05  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,

  Catch assertions raised while selecting a new CDL template.

1999-08-05  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,

  Tidy up AddItems() source. No functional change.

1999-08-05  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp:

  Fix GetDefaultHardware() to pass the length of the
  data buffer to RegQueryValueEx() correctly.

1999-08-04  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\CellView.cpp,h, common\win32\mltview.cpp,h :
  workaround for slickedit bug (paint our own backgrounds)
  * common\win32\ControlView.cpp : force a cell view update to improve latency
  * tools\ecostest\common\TestResource.cpp : avoid compilation warning
  * common\win32\ConfigItem.cpp,h : replace state variables by parameter of 
  EvalEnumStrings a parameter to police just-in-time lookup
  * tools\testtool\win32\RunTestsSheet.cpp,h : allow for modeless as well as modal operation
  * eCos.rc : restore include of TestTool.rc

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * common.win32\CellView.cpp:

  Modify InCell() to invoke EvalEnumStrings() for
  config items of type CConfigItem::Enum only.

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Remove obsolete m_nGeneralFlag and m_nDefinitionLine
  members.

  Simplify EvalEnumStrings() to process config items
  of type CConfigItem::Enum only.

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Remove m_nEnumMax member and Modify EnumMax() to
  use CStringArray::GetUpperBound().

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp,
    common\win32\ConfigItem.h:

  Remove obsolete m_nMin, m_nMax and CanSetValue()
  class members.
   
  Add m_nEnumMax member to support combo boxes in the
  cell view.

  * common\win32\CellView.cpp:

  Modify InCell() and GetInCellRect() to use
  CConfigItem::EnumMax().

  * common\win32\ControlView.cpp:

  Modify BumpItem() to use CConfigItem::EnumMax() and
  correctly handle the decrementing of enum config
  items.

  * common\win32\PropertiesView.cpp:

  Remove obsolete references to Min and Max rows of the
  properties view.

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h,

  Remove obsolete ReadMacros() function.

  Modify AddItem() to no longer read enum values during
  initialisation. They are always read just-in-time now.

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\cdl.dsp,
    standalone\win32\cdl.mak:

  Correct path to libCDL source files which was preventing
  source browsing.

1999-08-04  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h:

  New function GetDefaultHardware() retrieves the
  default hardware template from the registry.

  Modify OpenRepository() to load the default hardware
  template obtained by GetDefaultHardware().

1999-08-03  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\ConfigtoolDoc.cpp,
    standalone\win32\ConfigtoolDoc.h,

  Modify OpenRepository() to catch exceptions generated
  while loading the hardware and package templates.

  Modify CdlErrorHandler() to save the most recent
  error message in a member variable for reporting
  purposes.

1999-08-03  John Dallaway  <jld@redhat.co.uk>

    standalone\win32\ConfigtoolDoc.cpp:

  Modify OpenRepository() to delete any previous CDL
  configuration before creating the new one.

1999-08-02  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\AddRemoveDialog.cpp: Removed debugging code
  * common\win32\CTUtils.cpp: Include <string> with STLInclude mechanism
  * common\win32\CellView.cpp,h: Combo in-cell changes now only "committed" when
  cell closed.  Cancel will leave value unchanged.
  * common\win32\ControlView.cpp,h,
    standalone\win32\HelpView.cpp,
    standalone\win32\MainFrm.cpp, standalone\win32\OutputView.cpp,h:
  Allow only a single find dialog to be active at a given time
  * standalone\win32\MainFrm.cpp: Diable edit menu items when focus not in control view

1999-08-02  Simon FitzMaurice  <sdf@redhat.co.uk>
  * standalone\win32\Configtool.dsp, standalone\win32\Configtool.mak, standalone\win32\Configtool.rc :
  Properly include testtool resources.

1999-08-02  Simon FitzMaurice  <sdf@redhat.co.uk>
  * tools\configtool\common\win32\CTUtils.cpp : Include <string> with IncludeSTL mechanism
  * tools\configtool\common\win32\CellView.*  : ESC now cancels effect of combo
   
1999-08-02  John Dallaway  <jld@redhat.co.uk>

    standalone\win32\ConfigtoolDoc.cpp:

  Modify CdlErrorHandler() to log parse errors to the
  output window.

  Modify LogConflicts() to strip all unnecessary whitespace
  from messages.

  Modify SelectPackages() to list non-hardware packages
  only in the dialog box. Addition and removal of hardware
  packages must be undertaken by selecting an appropriate
  hardware template to ensure selection of the correct
  memory layout. Also trap any parse errors which are
    encountered while loading\unloading packages. These are
  not fatal.

1999-08-02  Simon FitzMaurice  <sdf@redhat.co.uk>
  * common\win32\StringEdit.* : Add idle message hint for in-cell string editing
  * common\win32\IdleMessage.* : Add Reset() member function

1999-07-30  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.h:

  Remove obsolete members from class declaration.

  * standalone\win32\Configtool.rc:

  Use IDC_CT_EDIT rather than IDC_EDIT for multi-line
  string edit box.

1999-07-29  Simon FitzMaurice  <sdf@redhat.co.uk>
  * FolderDialog.*, NewFolderDialog.* : moved IDs to implementation
  (unknown why the existing code doesn't compile, but it doesn't)

1999-07-29  John Dallaway  <jld@redhat.co.uk>

  * common\win32\ConfigItem.cpp:

  Restore the implementation of EvalEnumStrings() which
  was erroneously commented out.

1999-07-29  John Dallaway  <jld@redhat.co.uk>

  * common\win32\RulesView.cpp:

  Modify OnDblclk() to jump to the config item referenced
  in the property column if the click was in that column.
  If the property does not reference a single config item
  then jump to the config item owning the conflict as
  before.

1999-07-28  John Dallaway  <jld@redhat.co.uk>

  * common\win32\PropertiesView.cpp,
    common\win32\PropertiesView.h:

  Modifications to minimise flicker in the properties view:

  Add a new function SetItemTextGrow() which sets the text
  of a list item in the properties list control, extending
  the list if necessary.

  Modify FillCtrl() to make use of the new SetItemTextGrow()
  function.

  Modify OnUpdate() to force the refresh of all list items
  when a new config item is selected, even if the new config
  item is of the same type as the old.

1999-07-27  Simon FitzMaurice  <sdf@redhat.co.uk>
  * DescView.*: Fixed selection of short description pane font
  * ControlView.cpp : Context menu now available on items of type NONE
  * CellView.cpp : Removed font change visibility when in-cell starts
  * ConfigTool.dsp : readded changelog

1999-07-27  John Dallaway  <jld@redhat.co.uk>

  * standalone\win32\cdl.sh:

  Accommodate eCos repository with any root directory
  name.

  Use external TCLHOME environment variable if it exists.

  * common\win32\ControlView.cpp:

  Modify AdjustItemImage() to display a greyed icon for
  all calculated config items.

  * common\win32\CellView.cpp, common\win32\ControlView.cpp:

  Modify all calls to CdlVisible::is_modifiable() to also
  test CdlVisible::is_active(). This is necessary because
  inactive config items may still be modifiable.

  Modify OnDraw() to use only CdlValuable::is_modifiable()
  in determining whether a config item can be edited.

  * standalone\win32\Configtool.dsp:

  Add ChangeLog.

  * standalone\win32\ConfigtoolDoc.cpp:

  Modify SetValue() to check if the new value of an integer
  item is legal and report to the user.

  Modify OnOpenDocument() to workaround the initial update
  problem temporarily by forcing the update of all views.

  * common\win32\PropertiesView.cpp:

  Modify DblClk() to handle double clicking on 'requires'
  properties by examining the associated CdlReference
  objects.

===========================================================

    1999-07-27    merge sources from devo\ide\src\gui\mfc\eCos
    and ecc\ecc\cdltools\current\host\build\win32

===========================================================

1999-07-23  Simon FitzMaurice  <sdf@redhat.co.uk>
  * CTMain.cpp, MultiDocSECWorksheet.* : turn close into hide of client windows
  in order to preserve caption and position.
  * ProjectManager.* : hack for invoking custom rules unconditionally
  * PropertiesView.cpp: fix to look for macros not macros-or-names
  * subprocess.*: save directory as CString, not psz    
  * IntegerEdit.cpp: allow hex and integer input

1999-07-23  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp:

  Modify EvalEnumStrings() to accommodate boolean
  config items.

1999-07-23  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp:

  Modify StringValue() to observe the hex display
  option if enabled.

1999-07-23  John Dallaway  <jld@redhat.co.uk>

  * ControlView.cpp:

  Modify RestoreDefault() to skip the root tree node
  which has no CDL item.

  * PropertiesView.cpp:

  Modify FillCtrl() to omit the Min and Max rows for
  integer items. CDL now allows multiple ranges with
  calculated limits.
   
  Rename the evaluated "Default Value" row to "Default"
  to distinguish it from the "DefaultValue" CDL
  property which presents the underlying expression.
  Both items provide useful information.

  * ConfigtoolDoc.cpp:

  Modify CdlTransactionHandler() to switch memory
  layout if a config item with display string "Startup
  type" changes value.

1999-07-22  John Dallaway  <jld@redhat.co.uk>

  * CdlTemplatesDialog.cpp, CdlTemplatesDialog.h:

  Modify OnSelchangeCdlTemplate() to fill the packages
  edit box with package aliases.

    Move most of the show\hide code into a new function
  ShowDetails() which can be called to hide details by
  default before the dialog is displayed.

  * eCos.rc:

  Tweak static text in templates dialog.

  * ConfigtoolDoc.cpp:

  Modify SelectPackages() to restore use of the
  CCdlPackagesDialog dialog.

  * CellView.cpp:

  Modify InCell() to recalculate the combo box size after
  the enum values have been fetched and the enum count is
  known.

1999-07-22  Simon FitzMaurice  <sdf@redhat.co.uk>
  * CellView.cpp - restore "restore default" for NONE items

1999-07-22  Simon FitzMaurice  <sdf@redhat.co.uk>
  * ComboEdit.cpp,.h : new class to deal with in-cell combobox edits
  For now this just exists to handle escape and enter cancellation, like
  integeredit and stringedit.
  * Integeredit.* : escape and enter cancellation, like stringedit.
  * Integeredit.cpp : reverse sense of ES_NUMBER
  * CellView.cpp : use of the above

1999-07-22  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp, ConfigItem.h:

  New function EvalEnumStrings() to calculate the legal
  values on a just-in-time basis.

  Modify DefaultValue() to obtain data from libCDL directly.

  * ConfigtoolDoc.cpp:

  Modify ItemTypeOf() to return ConfigItem::Integer if
  there are legal ranges.

  Modify AddItem() to no longer read legal values on
  initialisation. They are now read just-in-time.

  * ControlView.cpp:

  Modify BumpItem() to restore Enum bump facility using
  CConfigItem::EvalEnumStrings().

  * PropertiesView.cpp:

  Modify FillCtrl() to use StringDefaultValue() to fill
  the "Default Value" field for all config item types.

  * CellView.cpp:

  Modify InCell() to read the Enum values just-in-time
  using CConfigItem::EvalEnumStrings().

1999-07-22  Simon FitzMaurice  <sdf@redhat.co.uk>
  * StringEdit.* : Fixed edit cancelling by means of escape and enter keys
  * ControlView.* : Tailor context menu better to item under point
  Give focus to an in-cell edit after creation
  * CellView.cpp : Add rclick functionality as for controlview (still some
  more to do here: better positioning of context menu and syskey accels)
  * ConfigToolDoc.* : Find now takes optional "where" parameter
  * PropertiesView.cpp : Implement double cliok on name.macro functionality
  * RulesView.cpp : Restored selection on double-click functionality
  * ecos.rc : Restored missing properties resource
   
1999-07-22  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp, ConfigItem.h:

  Modify StringValue() to take a CdlValueSource parameter.
  Modify StringDefaultValue() to use StringValue().

  * ControlView.cpp:

  Modify OnRestoreDefaults() to refresh the other views.

  * ConfigtoolDoc.h:

  Make UpdateFailingRuleCount() public.


  * ConfigtoolDoc.cpp:

  Remove remaining reference to CDL structural conflicts missed
  in previous commit.

1999-07-22  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp:

  Modify Modified() to determine whether an option has been
  modified using CdlValuableBody::get_source().

  * ConfigtoolDoc.cpp:

  Modify OnCloseDocument() to disable the CDL transaction handler
  before deleting CDL data.

  Modify AddItem() to no longer set the initial value of a new
  config item. This is not necessary now the values are stored in
  CDL objects.

  * ControlView.cpp:

  Modify IsChanged() to use CConfigItem::Modified().

  Modify RestoreDefault() to restore the default option value
  using a call to CdlValuableBody::set_source().

1999-07-22  Simon FitzMaurice  <sdf@redhat.co.uk>
  * AddRemoveDialog.*: add fn to limit expansion of listbox sizes.
  GetStyle() does not return WS_HSCROLL attribute - work around this
  * CTOPtionsDialog.*: remove options unlikely to be implemented RSN
  * CDTemplatesDialog.*: add "Details" button (filling of control still to do)
  * ConfigToolDoc.cpp: Tidied CFileName usage
  * Project.cpp: used slightly different AddLibrary hack
  * ProjectManager.cpp: added timing fns
  * eCos.rc: changes associated with the above + remove usused dialogs
  * testtoolres.h: Restore missing defines
  * Outputpage.cpp: Use a fixed font
  * ExecutionPage.cpp: Remove unused refresh map entry

1999-07-21  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, PropertiesView.cpp, RulesView.cpp:

  Ignore CDL _structural_ conflicts for now.

1999-07-21  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:

  New CdlTransactionHandler() function to manage refreshing
  of the config tree.

  Modify OpenRepository(), SelectPackages() and SelectTemplate()
  to install and disable the CDL transaction handler as
  appropriate.

  * ControlView.cpp, ControlView.h:

  Rename Enable() to Refresh() and remove vestigial second
  argument.

  Modify Enabled() to use CdlUserVisible::is_active().

  Modify BumpItem() to disabled bumping of Enum options for now.

1999-07-21  John Dallaway  <jld@redhat.co.uk>

  * RulesView.cpp:

  Modify AddConflicts() to save the unique CdlConflict as the
  item data in the list control.

  Modify OnDblClk() to derive the config item from the new list
  item data.

  Re-implement CompareFunc() to sort with the list control text.

1999-07-21  John Dallaway  <jld@redhat.co.uk>

  * ConfigtooDoc.cpp:

  Modify in line with recent changes to the libCDL API. All
  legal values are now obtained via CdlListValue::get_table().

1999-07-20  Simon FitzMaurice  <sdf@redhat.co.uk>
  * ConfigToolDoc.*, CTMain,*: CConfigToolDoc no longer derives from CDocument
  Added fn. to show eCos bar
  Tidied up MLT message handlers
  * ConfigItem.* etc...added fn to select - includes showing eCos bar
  * ControlView.cpp: modified IsChanged to accommodate all types of item

1999-07-20  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp, ConfigItem.h:

    Modify SetValue(), StringValue() and Value() to store\retrieve
  config values using libCDL.

  * PropertiesView.cpp:

  Modify OnUpdate() to refresh property list icons when
  CConfigToolDoc::ValueChanged.

  * CellView.cpp:

  Modify CancelCellEdit(), OnComboCelEndOK() and InCell() to store
  values of config items of type Enum as strings.

1999-07-20  Simon FitzMaurice  <sdf@redhat.co.uk>
  * CTMain.cpp: removed obsolete include of mainfrm.h and resource.h in 
  favour of ide.guicommon.h
  * CTUtils.* etc...: renamed StrToInt as StrToItemIntegerType (clashed
  SDK define)
  * CellView.*, ControlView.*: added find menu greying functionality, 
  find again functionality
  * Project.cpp: minor fixes to library deps
  * Thermometer: added optional second (name) param to ctor

1999-07-20  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, PropertiesView.cpp, RulesView.cpp:

  Modify in line with minor changes to the libCDL API.
  Specifically, CdlBaseBody has been eliminated in favour
  of CdlNodeBody and CdlListExpression::eval() now takes
  a CdlEvalContext parameter.

1999-07-20  John Dallaway  <jld@redhat.co.uk>

  * CTMain.cpp, CTMain.h:

  Modify update handlers such that MLT function menu
  items are greyed if the MLT view is hidden.

Mon Jul 19 17:50:10 1999  Tomy Hudson  <thudson@redhat.com>

  * stdafx.h: Remove obsolete include of ide.model.h

1999-07-19  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  New function CopyMLTFiles() copies all MLT-related files
    for the current target\platform from the eCos repository
  to the build tree.

1999-07-19  John Dallaway  <jld@redhat.co.uk>

  * CTMain.cpp, CTMain.h:

  Add new menu items and associated message handlers to
  add, remove and edit memory layout regions and sections.

  * ConfigtoolDoc.cpp:

  Re-enable correct functioning of CurrentPlatform() now that
  enum config options are supported.

  Modify SetValue() to detect a change in target or platform
  by comparing old values with new ones.

1999-07-19  Simon FitzMaurice  <sdf@redhat.co.uk>
  * CTMain.*,ProjectManager.*: Adjusted to allow multiple init and finalize
  * ConfigtoolDoc.*: Add persistence via registry, removed some unused code
  * Properties.*, ConfigTool.* etc...: Added registry specification to CProperties ctor
  * .cvsignore: updated
  * CTOptionsDialog.*: removed unused code
  * Project.*: added yet another hack for lack of custom rules

1999-07-16  Simon FitzMaurice  <sdf@redhat.co.uk>
  * CTMain.*, CFileName.*
  Removed DeleteFolderAndContents in favour of CFileName::RecursivelyDelete
  Grey packages and templates dialogs if build in progress
  Proper preprocessing around SEC3DTabWnd
  * ConfigTool.*:
  eCosInit gains build tree and bCreate params
  * ConfigToolDoc.*:
  Introduce BuildTree() and InstallTree() helper fns.
  * Project.cpp:
  Custom rules go in install tree, not build tree
  * eCos.dsp. eCos.mak:
  Add dependency on guicommon
  * cdl.dsp:
  Added cdl.sh to project

1999-07-16  John Dallaway  <jld@redhat.co.uk>

  * CdlTemplatesDialog.cpp, CdlTemplatesDialog.h,
  eCos.rc, eCosres.h:

  New template selection dialog box and handlers.

  * eCos.dsp, eCos.mak:

  Add CdlTemplatesDialog.cpp and CdlTemplatesDialog.h
  to the eCos project.

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  New SelectTemplate() function to setup and invoke the
  new template selection dialog box.

  * CTMain.cpp, CTMain.h:

  New "eCos Template..." menu item and handler to call
  CConfigToolDoc::SelectTemplate().


1999-07-15  John Dallaway  <jld@redhat.co.uk>

  * cdl.sh:

  Create the intermediate directory if it doesn't exist.

1999-07-15  Simon FitzMaurice  <sdf@redhat.co.uk>
  * cdl.dsp cdl.mak cdl.sh
  Fix to work on command line.

1999-07-15  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp:

  Modify FileName() to generate the header file name for
  a config item using libCDL calls.

  * PropertiesView.cpp:

  Modify DblClk() to prepend the build tree to the header
  file name before launching the associated file viewer.

1999-07-15  John Dallaway  <jld@redhat.co.uk>

  * cdl.dsp, cdl.mak:

  Generate the TCLHOME environment variable from the current
  directory. It is no longer necessary to define TCLHOME
  externally.

  * eCos.dsp, eCos.mak:

  Remove explicit references to cdl.lib and cyginfra.lib
  since these are outputs of the cdl project.

1999-07-15  Simon FitzMaurice  <sdf@redhat.co.uk>

  * eCos.dsp, eCos.mak:
    Included ..\..\..\..\tcl\lib on library path

1999-07-15  Simon FitzMaurice  <sdf@redhat.co.uk>

  * eCos.dsp, eCos.mak:
    Included ..\..\..\..\tcl\include on path so as to be able to use checked-in tcl files
  Restored missing FindDialog and MultiLineEditString files to link

1999-07-15  John Dallaway  <jld@redhat.co.uk>

  * PropertiesView.cpp, PropertiesView.h:

  Remove "Defined at line" property from the properties
  view as this information is no longer available.

1999-07-14  Simon FitzMaurice  <sdf@redhat.co.uk>

  * ConfigtoolDoc.cpp
  * ConfigtoolDoc.h
  * ControlView.cpp
  * IntegerEdit.cpp
  * IntegerEdit.h
  * Project.cpp
  * Project.h
  * ProjectManager.cpp
  * ProjectManager.h
  * PropertiesView.cpp
  * StringEdit.cpp
  * StringEdit.h
  * cdl.dsp
  * cdl.mak
  * eCos.dsp
  * eCos.mak
  Introduced StringEdit class to deal with in-cell string editing (whether 
  multiline or not)
    Prepared document load\save functions to accommodate CDL databse loading\
  saving
  Corrected IntegerEdit to deal correctly with hex and decimal modes
  Introduced hacks into CProject to deal with addLibrary not working and
  implicit dependency on target.ld

1999-07-14  Drew Moseley  <dmoseley@redhat.com>

  * .cvsignore: Ignore .dep files.

1999-07-14  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:

  Modify OpenRepository() to check that there is at least one
  target and one template in the specified packages database
  file.

  Modify the constructor to enable the presentation of boolean
  values in the cell view by default.

1999-07-14  John Dallaway  <jld@redhat.co.uk>

  * PropertiesView.cpp:

  Restore handling code for ValueChanged updates which
  was erroneously commented out in an earlier commit.

1999-07-14  John Dallaway  <jld@redhat.co.uk>

  * ControlView.cpp:

  Modify BumpItem() to avoid changing the value of calculated
  options.

  Modify AdjustItemImage() to present a greyed checkbox icon
  for calculated boolean options.

1999-07-14  John Dallaway  <jld@redhat.co.uk>

  * CellView.cpp:

  Modify OnDraw() to show calculated option values greyed.

  Modify OnLButtonDown() to prevent user editing of calculated
  option values.

1999-07-13  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:

  Use CdlValue::get_flavor () to determine the type and
  default value of each config item.

  Use CdlValuable::get_legal_values() to set up the
  enum list for config items of type Enum. This needs
  to be performed just-in-time in due course. 

1999-07-13  Simon FitzMaurice  <sdf@redhat.co.uk>

  Find functionality.

1999-07-13  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp, ConfigItem.h:

  Add new member variable m_CdlItem pointing to the associated
  CDL node.

  * ConfigtoolDoc.cpp:

  Use get_default_value_expression ()->eval () rather than
  get_argc () to calculate the default value at the time of
  creating each CConfigItem object.

1999-07-12  Simon FitzMaurice  <sdf@redhat.co.uk>

  Removed more of unused variables and unused code.
  Tidied up repository-filename access in the document class.
  Moved eCos tools menu items to an "eCos" submenu.
  Moved enums to stdafx.
  Finally got rid of those pesky STL warnings.
  Added description functionality to AddRemoveDialog
  Added status bar code in accordance with latest functionality:
  new classes CIdleMessage and CThermometer
  Removed MultiLineString code

1999-07-12  John Dallaway  <jld@redhat.co.uk>

  * cdl.dsp, cdl.mak:

  Generate intermediate files and output files on logical
  drive V:

1999-07-12  John Dallaway  <jld@redhat.co.uk>

  * CTOptionsDialog.cpp, ConfigtoolDoc.cpp, ConfigtoolDoc.h,
  ConfigTool.cpp, CTMain.cpp, PropertiesView.cpp, RulesView.cpp

  Remove or comment out all references to libNotCDL, CRule
  and CFailingRulesDialog.

  * eCos.dsp, eCos.mak:

  No longer build the CFailingRulesDialog and CRule classes,
  but keep them in the project for reference temporarily.

  Remove all libNotCDL files from the project.

1999-07-09  Simon FitzMaurice  <sdf@redhat.co.uk>

  Removed a large number of unused variables
  Introduced GetMain() function to CConfigTool: CTMain fns no longer have to be static.

1999-07-09  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  Remove UpdateFailingRuleCount() which is also provided
  by class CConfigToolMain. Modify all references to
  use the remaining version of this function.

  * RulesView.h:

  Remove unnecessary GetConflictCount() function.

  * CTMain.cpp, CTMain.h:

  Modify UpdateFailingRuleCount() to determine the
  conflict count from the document's m_CdlConfig
  object directly. Also make the function static.

1999-07-09  John Dallaway  <jld@redhat.co.uk>

  * RulesView.cpp:

  Modify AddConflicts() to present the formal property
  name rather than argv [0] which could be an alias for
  the property name.

1999-07-09  John Dallaway  <jld@redhat.co.uk>

  * ConfigItem.cpp, ConfigItem.h:

  Reduce dependencies on the CRule class as a precursor
  to removing CRule. Remove all dependencies on the
  CHeaderFile class.

  * eCos.dsp, eCos.mak:

  No longer build the obsolete CHeaderFile class.

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  Remove all dependencies on the CHeaderFile class.

  Read default values for items using libCDL calls in
  AddItem () rather than calling SetDefaults() and
  ReadMacros().

  Set package items to type 'None' so that they
  cannot be deselected.

  Remove obsolete Rule() member function.

  * ControlView.cpp:

  Modify AdjustItemImage() to display package icons for
  packages (which are now of type 'None').

  Modify ShowPopupMenu() to enable 'Properties' menu
  item for packages (which are now of type 'None').

  * Rule.cpp:

  Comment out references to the removed function
  CConfigToolDoc::Rule ().

1999-07-08  John Dallaway  <jld@redhat.co.uk>

  * PropertiesView.cpp, PropertiesView.h:

  New function PropertyInConflictsList() determines if
  a CDL property is within a specified list of CDL
  conflicts.

  Modify the FillCtrl() function to add an exclamation
  icon to listed properties which are within any CDL
  conflict list by calling the new
  PropertyInConflictsList() function.

1999-07-08  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:

  Use CDL flavor info to workaround the lack of
  get_widget_hint() for now.

1999-07-08  John Dallaway  <jld@redhat.co.uk>

  * CTUtils.cpp:

  Accommodate both leading and trailing whitespace in
  the StripExtraWhitespace() function.

  * PropertiesView.cpp:

  Add CDL properties to the properties view list box in
  function FillCtrl().

1999-07-07  John Dallaway  <jld@redhat.co.uk>

  * RulesView.cpp:

  Modify FillRules() function to present all property
  arguments for each conflict.

1999-07-07  John Dallaway  <jld@redhat.co.uk>

  * RulesView.cpp, RulesView.h:

  Modify FillRules() function to fill the rules list with
  CDL conflicts by calling a new function AddConflicts().

  Modify OnDblclk() message handler to use a CItem pointer
  from the list view rather than the previous CRule
  pointer.

  * CTMain.cpp, CTMain.h:

  New View->Conflicts menu item and message handlers
  replacing View->Rules items.

  Change rules window caption to 'Conflicts' in the
  constructor.

  * ConfigtoolDoc.cpp:

  Modify UpdateFailingRuleCount() to call FillRules()
  unconditionally. And call UpdateFailingRuleCount() from
  AddAllItems().

1999-07-07  John Dallaway <jld@redhat.co.uk>

  * cdl.dsp, cdl.mak: New libCDL project which builds sources
    from devo\ecos. Requires Cygwin B20.1 bin directory in the
  list of 'executable files' directories (Tools->Options in VC++
    6 IDE). Also requires \bin such that \bin\sh exists. Finally
  requires that Tcl 8.1 is installed and a TCLHOME environment
    variable such that $TCLHOME\lib and $TCLHOME\include exist.

  * eCos.dsp, eCos.mak: Use the cdl.lib and cyginfra.lib built
  by the new libCDL project rather than the pre-built libraries
    at devo\ide\cdl.

1999-07-05  John Dallaway <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp ConfigtoolDoc.h:

  New function LogConflicts() logs global conflict explanation
  strings to the output pane. Called from AddAllItems().

1999-07-05  John Dallaway <jld@redhat.co.uk>

  * CdlPackagesDialog.cpp (OnInitDialog): Enable horizontal
  scrolling of listboxes to accommodate long package aliases.

1999-07-01  John Dallaway <jld@redhat.co.uk>

  * eCos.rc: Add the LBS_SORT property to the listboxes
  in the package selection dialog explicity. Add the dialog
  title (caption) explicity.

  * CdlPackagesDialog.cpp, ConfigtoolDoc.cpp (SelectPackages):

  Remove unnecessary dialog initialization code.

Thu Jul 01 07:52:10 1999  Ian Molee  <imolee@redhat.com>

  * eCos.dsp: Added proper CDL paths to library and header file
  search paths in project settings, to eliminate the need for the
  user to manually specify these in DevStudio settings.
  * eCos.mak: re-exported makefile with new settings.

1999-06-30  John Dallaway <jld@redhat.co.uk>

  * eCosres.h: Remove erroneous definition of IDC_EDIT1.

  * ConfigtoolDoc.cpp: Full implementation of SelectPackages()
    which performs package loading\unloading in response to
  user input.

1999-06-30  John Dallaway <jld@redhat.co.uk>

  * AddRemoveDialog.cpp, AddRemoveDialog.h: Additional
  constructor to allow use of class CAddRemoveDialog with other
  dialog resources.

  * CTUtils.cpp, CTUtils.h: New member function
  StripExtraWhitespace() returns a copy of a string in which
  each whitespace sequence s replaced by a single space
  character.

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h: Initial implementation
  of SelectPackages() using new dialog. New member function
  GetPackageName () returning a package name given a package
  alias.

  * eCos.dsp, eCos.mak, CdlPackageDialog.cpp,
  CdlPackageDialog.h, eCos.rc, eCosres.h:

  New dialog resource and class derived from CAddRemoveDialog
  implementing a package selection dialog.

1999-06-30  John Dallaway <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  AddAllItems(): New function to generate the CConfigItems
  objects. Called from OpenRepository() and forthcoming
    CDL package load\unload functions.

  SelectPackages(): Dummy version of a new function to invoke
  the forthcoming package selection dialog box.

  * CTMain.cpp, CTMain.h:

  New 'eCos Packages' menu item and OnToolsPackages() message
  handler.

Tue Jun 29 13:48:06 1999  Tomy Hudson  <thudson@redhat.com>

  * CTMain.cpp (CConfigToolMain): Changed all references of
  SECShortcutBar to QESECShortcutBar. Likewise for othre relevant
  stingray classes.
  * CTMain.h (class CConfigToolMain): Changed SEC3DTabWnd to
  QESEC3DTabWnd.

Mon Jun 28 14:30:34 1999  Ian Molee  <imolee@redhat.com>

  * ecos.dsp: Ensured that _SECDLL and _GXDLL are defined in all
  configurations to use the Objective Grid dynamically as the rest
  of the projects do, rather than linking it in statically.

1999-06-25  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp, ConfigtoolDoc.h:

  Use libCDL to read config options, eliminating
  ReadConfigData().

  New AddContents() function to handle CDL container nodes.

  Modify AddItem() to work with AddContents() and libCDL
  objects. Implement hack to determine target and platform
  packages in the absence of hCDL. No support for rules as
  yet.

  Modify ItemTypeOf() function to use libCDL get_widget_hint(),
  but get_widget_hint() is not working so assume all visible
  items are Boolean for now.

  Modify OnCloseDocument() to delete the CDL objects.

1999-06-16  John Dallaway  <jld@redhat.co.uk>

  * parse.cxx, notcdl.cxx, libnotcdl.hxx: Prefix libnotCDL class
  names with "not" to avoid naming clashes with libCDL classes.

  * Rule.h, Rule.cpp, ConfigtoolDoc.h ConfigtoolDoc.cpp: Use the
  revised libnotCDL class names.

  * eCos.dsp, eCos.mak: Make correct use of _UNICODE and NDEBUG
  pre-processor symbols in each of the build configurations.
  Add explicit references to the (external) cdl, cyginfra and
  tcl81 static libraries.

  * ConfigtoolDoc.h,
  ConfigtoolDoc.cpp (OpenRepository, GetPackageData):
  Read the package names using libCDL rather than pkgconf.tcl.
  Note that this requires an eCos repository containing the
  ecos.db packages database file.

1999-06-08  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:
  Check for expect.exe rather than make.exe in the user-selected
  build tools directory.

1999-06-08  John Dallaway  <jld@redhat.co.uk>

  * ConfigtoolDoc.cpp:
  Add 'run tests' data for SH, MIPS_TX39 and VR4300 targets from
  eCos repository.

Tue Jun 01 14:46:45 1999  Tomy Hudson  <thudson@redhat.com>

  * CTMain.h: Changed include from GuiToolkit.h to ide.guicommon.h
