new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/rs232/tx39/current/include/pkgconf/serial_tx39.h
@@ -0,0 +1,181 @@
+#ifndef CYGONCE_PKGCONF_SERIAL_TX39_H
+#define CYGONCE_PKGCONF_SERIAL_TX39_H
+// ====================================================================
+//
+//	pkgconf/serial_tx39.h
+//
+//	Device configuration file for tx39 serial ports
+//
+// ====================================================================
+//####COPYRIGHTBEGIN####
+//
+// -------------------------------------------
+// The contents of this file are subject to the Cygnus eCos Public License
+// Version 1.0 (the "License"); you may not use this file except in
+// compliance with the License.  You may obtain a copy of the License at
+// http://sourceware.cygnus.com/ecos
+// 
+// Software distributed under the License is distributed on an "AS IS"
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
+// License for the specific language governing rights and limitations under
+// the License.
+// 
+// The Original Code is eCos - Embedded Cygnus Operating System, released
+// September 30, 1998.
+// 
+// The Initial Developer of the Original Code is Cygnus.  Portions created
+// by Cygnus are Copyright (C) 1998 Cygnus Solutions.  All Rights Reserved.
+// -------------------------------------------
+//
+//####COPYRIGHTEND####
+// ====================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): 	        proven
+// Contributors:	proven
+// Date:	        1998-05-25	
+// Purpose:	        To allow the user to edit device specific
+//		        configuration options for the tx39 2 serial device.
+// Description:
+//
+//####DESCRIPTIONEND####
+//
+// ====================================================================
+
+#include <pkgconf/system.h>
+
+#ifdef CYGPKG_KERNEL
+#include <pkgconf/kernel.h>
+#endif
+
+/* Only define options if the driver is to be present. */
+#if defined( CYGPKG_HAL_TX39 ) && \
+   !defined( CYGPKG_HAL_TX39_SIM ) && \
+    defined( CYGPKG_DEVICES_SERIAL_RS232_TX39 )
+
+/* ----------------------------------------------------------------------------
+   {{CFG_DATA
+
+   cdl_package CYGPKG_DEVICES_SERIAL_RS232_TX39 {
+       display  "TX39 serial device code"
+       parent   CYGPKG_DEVICES_SERIAL_RS232_COMMON
+#       requires CYGPKG_HAL_TX39_JMR3904
+       requires CYGPKG_KERNEL
+       description "
+           Driver for the on-chip RS232 device."
+   }
+   
+   }}CFG_DATA
+*/
+
+/* ---------------------------------------------------------------------
+ * First we define all the options that are exportable to the user. These
+ * options will show/hide various methods for the class. 
+ */
+
+/* ---------------------------------------------------------------------
+ * Define what kernel mode the driver can support. One must be defined.
+ * Both can be defined. 
+ */
+#define CYG_DEVICE_SERIAL_RS232_TX39_KMODE_POLLED
+#ifdef CYGIMP_KERNEL_INTERRUPTS_DSRS
+#define CYG_DEVICE_SERIAL_RS232_TX39_KMODE_INTERRUPT
+#endif
+
+/* ---------------------------------------------------------------------
+ * Define if we do diag output. This could possible be another kmode.
+ * --proven 19980512
+ */
+#define CYG_DEVICE_SERIAL_RS232_TX39_KMODE_ASSERT	
+
+/* ---------------------------------------------------------------------
+ * Define the default baudrate and line mode.
+ */
+#define CYG_DEVICE_SERIAL_RS232_TX39_DEFAULT_BAUD_RATE	38400
+
+/* ---------------------------------------------------------------------
+ * Define if non binary terminal protocol modes are needed.
+ */
+#define CYG_DEVICE_SERIAL_RS232_TX39_READ_MODES
+#define CYG_DEVICE_SERIAL_RS232_TX39_WRITE_MODES
+
+
+#ifdef CYG_DEVICE_INTERNAL
+/* ==================================================================== 
+ * Now define internal only options. These options dictate the struture
+ * of a class but have no effect on the methods declared for a class.
+ */
+
+/* ---------------------------------------------------------------------
+ * The need for queues is only necessary in interrupt mode.
+ */
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_KMODE_INTERRUPT
+
+/* ---------------------------------------------------------------------
+ * Define the number of iorb read buffers the serial read_isr device can 
+ * handle at one time. Also define if the device needs to queue more iorbs
+ * than what the read_isr can handle.
+ */
+# define CYG_DEVICE_SERIAL_RS232_READ_BUFFERS	4
+# define CYG_DEVICE_SERIAL_RS232_READ_BUFFERS_LL	 
+
+/* ---------------------------------------------------------------------
+ * Define the number of iorb write buffers the serial write_isr device can 
+ * handle at one time. Also define if the device needs to queue more iorbs
+ * than what the write_isr can handle.
+ */
+# define CYG_DEVICE_SERIAL_RS232_WRITE_BUFFERS	4
+# define CYG_DEVICE_SERIAL_RS232_WRITE_BUFFERS_LL	
+
+#endif //  CYG_DEVICE_SERIAL_RS232_TX39_KMODE_INTERRUPT
+
+/* ==================================================================== 
+ * Duplicate the above options. DO NOT modify them. Modify the ones above.
+ * This is so the internal source files can be compiled from the same 
+ * common sources. These defines can never be exported to the user.
+ */
+
+/* ---------------------------------------------------------------------
+ * Define what kernel mode the driver can support. 
+ */
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_KMODE_INTERRUPT
+#define CYG_DEVICE_SERIAL_RS232_KMODE_INTERRUPT	1
+#endif
+
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_KMODE_POLLED
+#define CYG_DEVICE_SERIAL_RS232_KMODE_POLLED	0
+#endif
+
+/* ---------------------------------------------------------------------
+ * Define what line modes the driver can support. 
+ */
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_LINE_MODES
+#define CYG_DEVICE_SERIAL_RS232_LINE_MODES
+#endif
+
+/* ---------------------------------------------------------------------
+ * Define any terminal protocols need to be supported.
+ */
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_READ_MODES
+#define CYG_DEVICE_SERIAL_RS232_READ_MODES
+#endif
+
+#ifdef CYG_DEVICE_SERIAL_RS232_TX39_WRITE_MODES
+#define CYG_DEVICE_SERIAL_RS232_WRITE_MODES
+#endif
+
+#ifdef CYGPKG_KERNEL
+/* ---------------------------------------------------------------------
+ * Define if a mutex is needed to lock out multiple threads accessing
+ * the serial driver. If not defined then it is assumes only one
+ * thread will access the driver at a given time.
+ */
+#define CYG_DEVICE_SERIAL_RS232_MUTEX
+#endif /* CYGPKG_KERNEL */
+
+#endif // CYG_DEVICE_INTERNAL
+
+#endif /* ifdef CYGPKG_DEVICES_SERIAL_RS232_TX39 et al */
+
+#endif  /* CYGONCE_PKGCONF_SERIAL_TX39_H */
+/* EOF serial_tx39.h */