new file mode 100644
--- /dev/null
+++ b/packages/hal/arm/pid/current/cdl/hal_arm_pid.cdl
@@ -0,0 +1,394 @@
+# ====================================================================
+#
+#      hal_arm_pid.cdl
+#
+#      PID board HAL package configuration data
+#
+# ====================================================================
+#####COPYRIGHTBEGIN####
+#                                                                          
+# -------------------------------------------                              
+# The contents of this file are subject to the Red Hat eCos Public License 
+# Version 1.1 (the "License"); you may not use this file except in         
+# compliance with the License.  You may obtain a copy of the License at    
+# http://www.redhat.com/                                                   
+#                                                                          
+# Software distributed under the License is distributed on an "AS IS"      
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
+# License for the specific language governing rights and limitations under 
+# the License.                                                             
+#                                                                          
+# The Original Code is eCos - Embedded Configurable Operating System,      
+# released September 30, 1998.                                             
+#                                                                          
+# The Initial Developer of the Original Code is Red Hat.                   
+# Portions created by Red Hat are                                          
+# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
+# All Rights Reserved.                                                     
+# -------------------------------------------                              
+#                                                                          
+#####COPYRIGHTEND####
+# ====================================================================
+######DESCRIPTIONBEGIN####
+#
+# Author(s):      bartv
+# Original data:  gthomas
+# Contributors:
+# Date:           1999-06-13
+#
+#####DESCRIPTIONEND####
+#
+# ====================================================================
+
+cdl_package CYGPKG_HAL_ARM_PID {
+    display       "ARM PID evaluation board"
+    parent        CYGPKG_HAL_ARM
+    define_header hal_arm_pid.h
+    include_dir   cyg/hal
+    hardware
+    description   "
+        The pid HAL package provides the support needed to run
+        eCos on an ARM PID evaluation board."
+
+    compile       hal_diag.c plf_stub.c pid_misc.c
+
+    implements    CYGINT_HAL_DEBUG_GDB_STUBS
+    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
+
+    define_proc {
+        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_arm.h>"
+        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_arm_pid.h>"
+        puts $::cdl_header ""
+        puts $::cdl_header "#define HAL_PLATFORM_CPU    \"ARM 7TDMI\""
+        puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"PID\""
+        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"\""
+        puts $::cdl_header ""
+    }
+
+
+    cdl_component CYG_HAL_STARTUP {
+        display       "Startup type"
+        flavor        data
+        legal_values  {"RAM" "ROM"}
+        default_value {"RAM"}
+	no_define
+	define -file system.h CYG_HAL_STARTUP
+        description   "
+            When targetting the PID eval board it is possible to build
+            the system for either RAM bootstrap or ROM bootstrap(s). Select
+            'ram' when building programs to load into RAM using onboard
+            debug software such as Angel or eCos GDB stubs.  Select 'rom'
+            when building a stand-alone application which will be put
+            into ROM."
+
+    }
+
+    cdl_option CYGHWR_HAL_ARM_PID_DIAG_PORT {
+        display       "Diagnostic serial port"
+        flavor        data
+        legal_values  0 1
+        default_value 0
+        description   "
+            The PID board has two separate serial ports.  This option
+            chooses which of these ports will be used."
+    }
+
+    cdl_option CYGHWR_HAL_ARM_PID_DIAG_BAUD {
+        display       "Diagnostic serial port baud rate"
+        flavor        data
+        legal_values  9600 19200 38400 115200
+        default_value 38400
+        description   "
+            This option selects the baud rate used for the diagnostic port.
+            Note: this should match the value chosen for the GDB port if the
+            diagnostic and GDB port are the same."
+    }
+
+    cdl_option CYGHWR_HAL_ARM_PID_GDB_PORT {
+        display       "GDB serial port"
+        flavor        data
+        legal_values  0 1
+        default_value 0
+        description   "
+            The PID board has two separate serial ports.  This option
+            chooses which of these ports will be used to connect to a host
+            running GDB."
+    }
+
+    cdl_option CYGHWR_HAL_ARM_PID_GDB_BAUD {
+        display       "GDB serial port baud rate"
+        flavor        data
+        legal_values  9600 19200 38400 115200
+        default_value 38400
+        description   "
+            This option controls the baud rate used for the GDB connection."
+    }
+
+    cdl_option CYGHWR_HAL_ARM_PID_DIAG_LEDS {
+        display          "Enable use of PPx LEDs"
+        default_value    0
+        description      "
+            The PID board has four LEDs labelled PP0-PP3. These can be
+            controlled by eCos if jumpers 9-16 on LK11 are
+            shorted. Note that this prevents the parallel port from
+            being used. See the PID board manual for details.
+            
+            Enabling this option causes eCos to flash the LEDs during
+            early board initialization. See vectors.S for
+            details. Before calling cyg_start, PP0 is switched on,
+            PP1-3 are switched off. The application code can use the
+            function hal_diag_led() to control the LEDs after this
+            point."
+   }
+
+    # Real-time clock/counter specifics
+    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
+        display       "Real-time clock constants"
+        flavor        none
+    
+        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
+            display       "Real-time clock numerator"
+            flavor        data
+            calculated    1000000000
+        }
+        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
+            display       "Real-time clock denominator"
+            flavor        data
+            calculated    100
+        }
+        cdl_option CYGNUM_HAL_RTC_PERIOD {
+            display       "Real-time clock period"
+            flavor        data
+           calculated    12500
+        }
+    }
+
+    cdl_component CYGBLD_GLOBAL_OPTIONS {
+        display "Global build options"
+        flavor  none
+        parent  CYGPKG_NONE
+        description   "
+	    Global build options including control over
+	    compiler flags, linker flags and choice of toolchain."
+
+
+        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
+            display "Global command prefix"
+            flavor  data
+            no_define
+            if {1} {
+                default_value { CYGHWR_THUMB ? "thumb-elf" : "arm-elf" }
+            } else {
+                default_value { "arm-elf" }
+            }
+            description "
+                This option specifies the command prefix used when
+                invoking the build tools."
+        }
+
+        cdl_option CYGBLD_GLOBAL_CFLAGS {
+            display "Global compiler flags"
+            flavor  data
+            no_define
+            if {1} {
+                 default_value { (CYGHWR_THUMB && CYGHWR_HAL_ARM_BIGENDIAN) ? "-mthumb-interwork -mbig-endian -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   CYGHWR_THUMB ? "-mthumb-interwork -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -mbig-endian -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && ! CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY != "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm7tdmi -mbig-endian -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   "-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
+            } else { 
+                default_value { (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -mbig-endian -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && ! CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY != "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm7tdmi -mbig-endian -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" :
+                   "-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
+            }
+            description   "
+                This option controls the global compiler flags which are used to
+                compile all packages by default. Individual packages may define
+                options which override these global flags."
+        }
+
+        cdl_option CYGBLD_GLOBAL_LDFLAGS {
+            display "Global linker flags"
+            flavor  data
+            no_define
+            if {1} {
+                 default_value { (CYGHWR_THUMB && CYGHWR_HAL_ARM_BIGENDIAN) ? "-mthumb-interwork -mbig-endian -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   CYGHWR_THUMB ? "-mthumb-interwork -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -mbig-endian -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && ! CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY != "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm7tdmi -mbig-endian -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   "-mcpu=arm7tdmi -g -nostdlib -Wl,--gc-sections -Wl,-static" }
+            } else { 
+                default_value { (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -mbig-endian -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY == "ARM9") && ! CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm9 -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   (CYGHWR_HAL_ARM_CPU_FAMILY != "ARM9") && CYGHWR_HAL_ARM_BIGENDIAN ? "-mcpu=arm7tdmi -mbig-endian -g -nostdlib -Wl,--gc-sections -Wl,-static" :
+                   "-mcpu=arm7tdmi -g -nostdlib -Wl,--gc-sections -Wl,-static" }
+            }
+            description   "
+                This option controls the global linker flags. Individual
+                packages may define options which override these global flags."
+        }
+
+        cdl_option CYGBLD_BUILD_GDB_STUBS {
+            display "Build GDB stub ROM image"
+            default_value 0
+            requires CYGBLD_BUILD_COMMON_GDB_STUBS
+            requires { CYG_HAL_STARTUP == "ROM" }
+            requires CYGSEM_HAL_ROM_MONITOR
+            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
+            requires ! CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
+            requires ! CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
+            requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
+            requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
+            no_define
+            description "
+                This option enables the building of the GDB stubs for the
+                board. The address of the ELF headers in the image are
+                adjusted to ensure loading at an address in memory used
+                by the flash tool."
+
+            make -priority 320 {
+                <PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
+                @mv $< $(<:.img=.elf)
+                $(OBJCOPY) --strip-debug --change-addresses=0xFC060000 $(<:.img=.elf) $<
+                $(OBJCOPY) -O binary $(<:.img=.elf) $@
+            }
+        }
+
+        cdl_option CYGBLD_BUILD_FLASH_TOOL {
+            display "Build flash programming tool"
+            default_value 0
+            requires { CYG_HAL_STARTUP == "RAM" }
+            requires CYGHWR_HAL_ARM_PID_DIAG_PORT == 1
+            requires CYGPKG_LIBC
+            requires CYGPKG_KERNEL
+            no_define
+            description "This option enables the building of the flash programming tool for copying the GDB stubs into flash memory."
+            make -priority 320 {
+                <PREFIX>/bin/prog_flash.img : <PACKAGE>/src/prog_flash.c
+                @sh -c "mkdir -p src $(dir $@)"
+                $(CC) -c $(INCLUDE_PATH) -Wp,-MD,deps.tmp -I$(dir $<) $(CFLAGS) -o src/prog_flash.o $<
+                @echo $@ ": \\" > $(notdir $@).deps
+                @echo $(wildcard $(PREFIX)/lib/*) " \\" >> $(notdir $@).deps
+                @tail +2 deps.tmp >> $(notdir $@).deps
+                @echo >> $(notdir $@).deps
+                @rm deps.tmp
+                $(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ src/prog_flash.o
+            }
+        }
+
+        cdl_option CYGBLD_BUILD_FLASH_TOOL_BE {
+            display "Build flash programming tool for BE images on LE boards"
+            default_value 0
+            requires { CYG_HAL_STARTUP == "RAM" }
+            requires CYGHWR_HAL_ARM_PID_DIAG_PORT == 1
+            requires CYGPKG_LIBC
+            requires CYGPKG_KERNEL
+            no_define
+            description "This option enables the building of the flash
+                         programming tool for copying the GDB stubs
+                         into flash memory. The tool built by enabling
+                         this option must be used when programming BE
+                         images on LE boards."
+            make -priority 320 {
+                <PREFIX>/bin/prog_flash_BE_image_LE_system.img : <PACKAGE>/src/prog_flash.c
+                @sh -c "mkdir -p src $(dir $@)"
+                $(CC) -DBE_IMAGE -c $(INCLUDE_PATH) -Wp,-MD,deps.tmp -I$(dir $<) $(CFLAGS) -o src/prog_flash_be.o $<
+                @echo $@ ": \\" > $(notdir $@).deps
+                @echo $(wildcard $(PREFIX)/lib/*) " \\" >> $(notdir $@).deps
+                @tail +2 deps.tmp >> $(notdir $@).deps
+                @echo >> $(notdir $@).deps
+                @rm deps.tmp
+                $(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ src/prog_flash_be.o
+            }
+        }
+    }
+
+    cdl_component CYGHWR_MEMORY_LAYOUT {
+        display "Memory layout"
+        flavor data
+        no_define
+        calculated { CYG_HAL_STARTUP == "RAM" ? "arm_pid_ram" : \
+                                                "arm_pid_rom" }
+
+        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
+            display "Memory layout linker script fragment"
+            flavor data
+            no_define
+            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
+            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_pid_ram.ldi>" : \
+                                                    "<pkgconf/mlt_arm_pid_rom.ldi>" }
+        }
+
+        cdl_option CYGHWR_MEMORY_LAYOUT_H {
+            display "Memory layout header file"
+            flavor data
+            no_define
+            define -file system.h CYGHWR_MEMORY_LAYOUT_H
+            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_pid_ram.h>" : \
+                                                    "<pkgconf/mlt_arm_pid_rom.h>" }
+        }
+    }
+
+
+    cdl_option CYGSEM_HAL_ROM_MONITOR {
+        display       "Behave as a ROM monitor"
+        flavor        bool
+        default_value 0
+        parent        CYGPKG_HAL_ROM_MONITOR
+        requires      { CYG_HAL_STARTUP == "ROM" }
+        description   "
+            Enable this option if this program is to be used as a ROM monitor,
+            i.e. applications will be loaded into RAM on the board, and this
+            ROM monitor may process exceptions or interrupts generated from the
+            application. This enables features such as utilizing a separate
+            interrupt stack when exceptions are generated."
+    }
+
+    cdl_component CYGPKG_CYGMON_HAL_OPTIONS {
+        display       "CygMon HAL options"
+        flavor        none
+        no_define
+        parent        CYGPKG_CYGMON
+        active_if     CYGPKG_CYGMON
+        requires      CYGPKG_IO_SERIAL_ARM_PID
+        requires      {(CYGDAT_CYGMON_CONSOLE_DEV != "\"/dev/ser0\"") || \
+                       (CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 &&              \
+                       (CYGNUM_IO_SERIAL_ARM_PID_SERIAL0_BUFSIZE == 512))}
+        requires      {(CYGDAT_CYGMON_CONSOLE_DEV != "\"/dev/ser1\"") || \
+                       (CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 &&              \
+                       (CYGNUM_IO_SERIAL_ARM_PID_SERIAL1_BUFSIZE == 512))}
+        description   "
+            This option also lists the target's requirements for a valid CygMon
+            configuration."
+
+
+        cdl_option CYGDAT_CYGMON_CONSOLE_DEV {
+            display       "Serial port for default console"
+            flavor data
+            default_value { "\"/dev/ser0\"" }
+            description   "
+                This option selects the physical device to use as the default
+                console device for CygMon."
+
+        }
+
+        cdl_option CYGBLD_BUILD_CYGMON_BIN {
+            display       "Build CygMon ROM binary image"
+            active_if     CYGBLD_BUILD_CYGMON
+            default_value 1
+            no_define
+            description "This option enables the conversion of the CygMon ELF
+                         image to a binary image suitable for ROM programming."
+    
+            make -priority 325 {
+                <PREFIX>/bin/cygmon.bin : <PREFIX>/bin/cygmon.elf
+                $(OBJCOPY) --strip-debug --change-addresses=0xFC060000 $< $(@:.bin=.img) 
+                $(OBJCOPY) -O srec $< $(@:.bin=.srec)
+                $(OBJCOPY) -O binary $< $@
+            }
+        }
+    }
+}