Mercurial > ecos
diff packages/io/serial/current/include/pkgconf/io_serial.h @ 2:443894e2e912 ecos-v1_2_1-release
Block commit of eCos version 1.2.1
| author | jlarmour |
|---|---|
| date | Tue, 11 May 1999 12:24:34 +0000 |
| parents | |
| children | 1d7f19c9e4d1 |
line wrap: on
line diff
new file mode 100644 --- /dev/null +++ b/packages/io/serial/current/include/pkgconf/io_serial.h @@ -0,0 +1,875 @@ +#ifndef CYGONCE_PKGCONF_IO_SERIAL_H +#define CYGONCE_PKGCONF_IO_SERIAL_H +// ==================================================================== +// +// pkgconf/io_serial.h +// +// Device configuration file +// +// ==================================================================== +//####COPYRIGHTBEGIN#### +// +// ------------------------------------------- +// The contents of this file are subject to the Cygnus eCos Public License +// Version 1.0 (the "License"); you may not use this file except in +// compliance with the License. You may obtain a copy of the License at +// http://sourceware.cygnus.com/ecos +// +// Software distributed under the License is distributed on an "AS IS" +// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the +// License for the specific language governing rights and limitations under +// the License. +// +// The Original Code is eCos - Embedded Cygnus Operating System, released +// September 30, 1998. +// +// The Initial Developer of the Original Code is Cygnus. Portions created +// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions. All Rights Reserved. +// ------------------------------------------- +// +//####COPYRIGHTEND#### +// ==================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): gthomas +// Contributors: gthomas +// Date: 1999-02-04 +// Purpose: To allow the user to edit device configuration options. +// Description: +// +//####DESCRIPTIONEND#### +// +// ==================================================================== + +#include <pkgconf/system.h> + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + + cdl_package CYGPKG_IO_SERIAL { + display "Serial device drivers" + type bool + requires CYGPKG_IO + parent CYGPKG_IO + description " + This option enables drivers for basic I/O services on + serial devices." + doc ref/ecos-ref/ecos-device-drivers.html + } + }}CFG_DATA */ + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_TTY { + display "TTY-mode serial device drivers" + type bool + requires CYGPKG_IO_SERIAL + description " + This option enables the terminal-like device driver + used for serial devices that interact with humans, + such as a system console." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TTY_CONSOLE { + display "Console device name" + type string + requires CYGPKG_IO_SERIAL_TTY + description " + This option selects the TTY device to use for the console." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ + +#define CYGPKG_IO_SERIAL_TTY +#define CYGDAT_IO_SERIAL_TTY_CONSOLE "/dev/ttydiag" + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_HALDIAG { + display "HAL/diag serial device driver" + type bool + requires CYGPKG_IO_SERIAL_TTY + parent CYGPKG_IO_SERIAL_TTY + description " + This option enables the use of the HAL diagnostic channel + via the standard I/O drivers." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ + +#define CYGPKG_IO_SERIAL_HALDIAG + + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_TTY_TTYDIAG { + display "TTY mode HAL/diag channel" + type bool + requires CYGPKG_IO_SERIAL_TTY + parent CYGPKG_IO_SERIAL_TTY + description " + This option causes '/dev/ttydiag' to be included in the standard drivers." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TTY_TTY0 { + display "TTY mode channel #0" + type bool + requires CYGPKG_IO_SERIAL_TTY + parent CYGPKG_IO_SERIAL_TTY + description " + This option causes '/dev/tty0' to be included in the standard drivers." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TTY_TTY0_DEV { + display "TTY mode channel #0 device" + type string + requires CYGPKG_IO_SERIAL_TTY_TTY0 + description " + This option selects the physical device to use for '/dev/tty0'." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TTY_TTY1 { + display "TTY mode channel #1" + type bool + requires CYGPKG_IO_SERIAL_TTY + parent CYGPKG_IO_SERIAL_TTY + description " + This option causes '/dev/tty1' to be included in the standard drivers." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TTY_TTY1_DEV { + display "TTY mode channel #1 device" + type string + requires CYGPKG_IO_SERIAL_TTY_TTY1 + description " + This option selects the physical device to use for '/dev/tty1'." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TTY_TTY2 { + display "TTY mode channel #2" + type bool + requires CYGPKG_IO_SERIAL_TTY + parent CYGPKG_IO_SERIAL_TTY + description " + This option causes '/dev/tty2' to be included in the standard drivers." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TTY_TTY2_DEV { + display "TTY mode channel #2 device" + type string + requires CYGPKG_IO_SERIAL_TTY_TTY2 + description " + This option selects the physical device to use for '/dev/tty2'." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ + +#define CYGPKG_IO_SERIAL_TTY_TTYDIAG +#undef CYGPKG_IO_SERIAL_TTY_TTY0 +#define CYGDAT_IO_SERIAL_TTY_TTY0_DEV "/dev/ser0" +#undef CYGPKG_IO_SERIAL_TTY_TTY1 +#define CYGDAT_IO_SERIAL_TTY_TTY1_DEV "/dev/ser1" +#undef CYGPKG_IO_SERIAL_TTY_TTY2 +#define CYGDAT_IO_SERIAL_TTY_TTY2_DEV "/dev/ser2" + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_ARM_PID { + display "ARM PID serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_ARM_PID + description " + This option enables the serial device drivers for the ARM PID." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 { + display "ARM PID serial port 0 driver" + type bool + parent CYGPKG_IO_SERIAL_ARM_PID + description " + This option includes the serial device driver for the ARM PID port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_ARM_PID_SERIAL0_NAME { + display "Device name for ARM PID serial port 0 driver" + type string + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 + description " + This option specifies the name of the serial device for the ARM PID port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_PID_SERIAL0_BAUD { + display "Baud rate for the ARM PID serial port 0 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 + description " + This option specifies the default baud rate (speed) for the ARM PID port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_PID_SERIAL0_BUFSIZE { + display "Buffer size for the ARM PID serial port 0 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 + description " + This option specifies the size of the internal buffers used for the ARM PID port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 { + display "ARM PID serial port 1 driver" + type bool + parent CYGPKG_IO_SERIAL_ARM_PID + description " + This option includes the serial device driver for the ARM PID port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_ARM_PID_SERIAL1_NAME { + display "Device name for ARM PID serial port 1 driver" + type string + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 + description " + This option specifies the name of the serial device for the ARM PID port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_PID_SERIAL1_BAUD { + display "Baud rate for the ARM PID serial port 1 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 + description " + This option specifies the default baud rate (speed) for the ARM PID port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_PID_SERIAL1_BUFSIZE { + display "Buffer size for the ARM PID serial port 1 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 + description " + This option specifies the size of the internal buffers used for the ARM PID port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ + +#undef CYGPKG_IO_SERIAL_ARM_PID +#undef CYGPKG_IO_SERIAL_ARM_PID_SERIAL0 +#define CYGDAT_IO_SERIAL_ARM_PID_SERIAL0_NAME "/dev/ser0" +#define CYGNUM_IO_SERIAL_ARM_PID_SERIAL0_BAUD 38400 +#define CYGNUM_IO_SERIAL_ARM_PID_SERIAL0_BUFSIZE 128 +#define CYGPKG_IO_SERIAL_ARM_PID_SERIAL1 +#define CYGDAT_IO_SERIAL_ARM_PID_SERIAL1_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_ARM_PID_SERIAL1_BAUD 38400 +#define CYGNUM_IO_SERIAL_ARM_PID_SERIAL1_BUFSIZE 128 + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_ARM_AEB { + display "ARM AEB-1 serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_ARM_AEB + description " + This option enables the serial device drivers for the ARM AEB-1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AEB_SERIAL0 { + display "ARM AEB-1 serial port 0 driver" + type bool + parent CYGPKG_IO_SERIAL_ARM_AEB + description " + This option includes the serial device driver for the ARM AEB-1 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_ARM_AEB_SERIAL0_NAME { + display "Device name for the ARM AEB-1 serial port 0 driver" + type string + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL0 + description " + This option sets the name of the serial device for the ARM AEB-1 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AEB_SERIAL0_BAUD { + display "Baud rate for the ARM AEB-1 serial port 0 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL0 + description " + This option specifies the default baud rate (speed) for the ARM AEB-1 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AEB_SERIAL0_BUFSIZE { + display "Buffer size for the ARM AEB-1 serial port 0 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL0 + description " + This option specifies the size of the internal buffers used for the ARM AEB-1 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 { + display "ARM AEB-1 serial port 1 driver" + type bool + parent CYGPKG_IO_SERIAL_ARM_AEB + description " + This option includes the serial device driver for the ARM AEB-1 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_ARM_AEB_SERIAL1_NAME { + display "Device name for the ARM AEB-1 serial port 1 driver" + type string + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 + description " + This option specifies the name of serial device for the ARM AEB-1 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AEB_SERIAL1_BAUD { + display "Baud rate for the ARM AEB-1 serial port 1 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 + description " + This option specifies the default baud rate (speed) for the ARM AEB-1 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_ARM_AEB_SERIAL1_BUFSIZE { + display "Buffer size for the ARM AEB-1 serial port 1 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 + description " + This option specifies the size of the internal buffers used for the ARM AEB-1 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ +#undef CYGPKG_IO_SERIAL_ARM_AEB +#undef CYGPKG_IO_SERIAL_ARM_AEB_SERIAL0 +#define CYGDAT_IO_SERIAL_ARM_AEB_SERIAL0_NAME "/dev/ser0" +#define CYGNUM_IO_SERIAL_ARM_AEB_SERIAL0_BAUD 38400 +#define CYGNUM_IO_SERIAL_ARM_AEB_SERIAL0_BUFSIZE 128 +#undef CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 +#define CYGDAT_IO_SERIAL_ARM_AEB_SERIAL1_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_ARM_AEB_SERIAL1_BAUD 38400 +#define CYGNUM_IO_SERIAL_ARM_AEB_SERIAL1_BUFSIZE 128 + + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_POWERPC_COGENT { + display "Cogent PowerPC serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_POWERPC_COGENT + description " + This option enables the serial device drivers for the Cogent PowerPC." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_A { + display "Cogent PowerPC serial port A driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_POWERPC_COGENT + description " + This option includes the serial device driver for the Cogent PowerPC port A." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_POWERPC_COGENT_SERIAL_A_NAME { + display "Device name for Cogent PowerPC serial port A" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_A + description " + This option specifies the device name for the Cogent PowerPC port A." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_A_BAUD { + display "Baud rate for the Cogent PowerPC serial port A driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_A + description " + This option specifies the default baud rate (speed) for the Cogent PowerPC port A." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_A_BUFSIZE { + display "Buffer size for the Cogent PowerPC serial port A driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_A + description " + This option specifies the size of the internal buffers used for the Cogent PowerPC port A." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_B { + display "Cogent PowerPC serial port B driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_POWERPC_COGENT + description " + This option includes the serial device driver for the Cogent PowerPC port B." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_POWERPC_COGENT_SERIAL_B_NAME { + display "Device name for Cogent PowerPC serial port B" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_B + description " + This option specifies the device name for the Cogent PowerPC port B." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_B_BAUD { + display "Baud rate for the Cogent PowerPC serial port B driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_B + description " + This option specifies the default baud rate (speed) for the Cogent PowerPC port B." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_B_BUFSIZE { + display "Buffer size for the Cogent PowerPC serial port B driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_B + description " + This option specifies the size of the internal buffers used for the Cogent PowerPC port B." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ +#undef CYGPKG_IO_SERIAL_POWERPC_COGENT +// Only enable both ports if interrupt chaining is enabled. +#undef CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_A +#define CYGDAT_IO_SERIAL_POWERPC_COGENT_SERIAL_A_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_A_BAUD 38400 +#define CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_A_BUFSIZE 128 +#define CYGPKG_IO_SERIAL_POWERPC_COGENT_SERIAL_B +#define CYGDAT_IO_SERIAL_POWERPC_COGENT_SERIAL_B_NAME "/dev/ser2" +#define CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_B_BAUD 38400 +#define CYGNUM_IO_SERIAL_POWERPC_COGENT_SERIAL_B_BUFSIZE 128 + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB { + display "SPARClite SLEB serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_SPARCLITE_SLEB + description " + This option enables the serial device drivers for the SPARClite SLEB." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 { + display "SPARClite SLEB serial CON1 port driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB + description " + This option includes the serial device driver for the SPARClite SLEB CON1 port." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON1_NAME { + display "Device name for SPARClite SLEB serial CON1 port" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 + description " + This option specifies the device name for the SPARClite SLEB CON1 port." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BAUD { + display "Baud rate for the SPARClite SLEB serial CON1 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 + description " + This option specifies the default baud rate (speed) for the SPARClite SLEB CON1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE { + display "Buffer size for the SPARClite SLEB serial CON1 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 + description " + This option specifies the size of the internal buffers used for the SPARClite SLEB CON1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 { + display "SPARClite SLEB serial CON2 port driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB + description " + This option includes the serial device driver for the SPARClite SLEB CON2 port." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON2_NAME { + display "Device name for SPARClite SLEB serial CON2 port" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 + description " + This option specifies the device name for the SPARClite SLEB CON2 port." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BAUD { + display "Baud rate for the SPARClite SLEB serial CON2 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 + description " + This option specifies the default baud rate (speed) for the SPARClite SLEB CON2." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE { + display "Buffer size for the SPARClite SLEB serial CON2 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 + description " + This option specifies the size of the internal buffers used for the SPARClite SLEB CON2." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ +#undef CYGPKG_IO_SERIAL_SPARCLITE_SLEB +#undef CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 +#define CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON1_NAME "/dev/ser0" +#define CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BAUD 19200 +#define CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE 128 +#undef CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 +#define CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON2_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BAUD 19200 +#define CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE 128 + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_TX39_JMR3904 { + display "TX39 JMR3904 serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_TX39_JMR3904 + description " + This option enables the serial device drivers for the TX39 JMR3904." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TX39_JMR3904_POLLED_MODE { + display "TX39 JMR3904 polled mode serial drivers" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_TX39_JMR3904 + description " + If asserted, this option specifies that the serial device drivers for + the TX39 JMR3904 should be polled-mode instead of interrupt driven." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL0 { + display "TX39 JMR3904 serial port 0 driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_TX39_JMR3904 + description " + This option includes the serial device driver for port 0 on the TX39 JMR3904." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TX39_JMR3904_SERIAL0_NAME { + display "Device name for TX39 JMR3904 serial port 0" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL0 + description " + This option specifies the device name port 0 on the TX39 JMR3904." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL0_BAUD { + display "Baud rate for the TX39 JMR3904 serial port 0 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL0 + description " + This option specifies the default baud rate (speed) for the TX39 JMR3904 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL0_BUFSIZE { + display "Buffer size for the TX39 JMR3904 serial port 0 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL0 + description " + This option specifies the size of the internal buffers used for the TX39 JMR3904 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL1 { + display "TX39 JMR3904 serial port 1 driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_TX39_JMR3904 + description " + This option includes the serial device driver for port 1 on the TX39 JMR3904." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_TX39_JMR3904_SERIAL1_NAME { + display "Device name for TX39 JMR3904 serial port 1" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL1 + description " + This option specifies the device name port 1 on the TX39 JMR3904." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL1_BAUD { + display "Baud rate for the TX39 JMR3904 serial port 1 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL1 + description " + This option specifies the default baud rate (speed) for the TX39 JMR3904 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL1_BUFSIZE { + display "Buffer size for the TX39 JMR3904 serial port 1 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL1 + description " + This option specifies the size of the internal buffers used for the TX39 JMR3904 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ +#undef CYGPKG_IO_SERIAL_TX39_JMR3904 +#undef CYGPKG_IO_SERIAL_TX39_JMR3904_POLLED_MODE +#undef CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL0 +#define CYGDAT_IO_SERIAL_TX39_JMR3904_SERIAL0_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL0_BAUD 38400 +#define CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL0_BUFSIZE 128 +#undef CYGPKG_IO_SERIAL_TX39_JMR3904_SERIAL1 +#define CYGDAT_IO_SERIAL_TX39_JMR3904_SERIAL1_NAME "/dev/ser2" +#define CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL1_BAUD 38400 +#define CYGNUM_IO_SERIAL_TX39_JMR3904_SERIAL1_BUFSIZE 128 + +// Note: this is not currently tied to a specific board since the ports are "on chip" + +/* ---------------------------------------------------------------------------- + {{CFG_DATA + cdl_component CYGPKG_IO_SERIAL_MN10300 { + display "MN10300 serial device drivers" + type bool + requires CYGPKG_IO_SERIAL +# parent CYGPKG_IO_SERIAL + parent CYGPKG_HAL_MN10300 + description " + This option enables the serial device drivers for the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_MN10300_POLLED_MODE { + display "MN10300 polled mode serial drivers" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300 + description " + If asserted, this option specifies that the serial device drivers for + the MN10300 should be polled-mode instead of interrupt driven." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL0 { + display "MN10300 serial port 0 driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300 + description " + This option includes the serial device driver for port 0 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL0_NAME { + display "Device name for MN10300 serial port 0" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300_SERIAL0 + description " + This option specifies the device name port 0 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BAUD { + display "Baud rate for the MN10300 serial port 0 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL0 + description " + This option specifies the default baud rate (speed) for the MN10300 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BUFSIZE { + display "Buffer size for the MN10300 serial port 0 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL0 + description " + This option specifies the size of the internal buffers used for the MN10300 port 0." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL1 { + display "MN10300 serial port 1 driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300 + description " + This option includes the serial device driver for port 1 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL1_NAME { + display "Device name for MN10300 serial port 1" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300_SERIAL1 + description " + This option specifies the device name port 1 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BAUD { + display "Baud rate for the MN10300 serial port 1 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL1 + description " + This option specifies the default baud rate (speed) for the MN10300 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BUFSIZE { + display "Buffer size for the MN10300 serial port 1 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL1 + description " + This option specifies the size of the internal buffers used for the MN10300 port 1." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL2 { + display "MN10300 serial port 2 driver" + type bool + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300 + description " + This option includes the serial device driver for port 2 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL2_NAME { + display "Device name for MN10300 serial port 2" + type string + requires CYGPKG_IO_SERIAL + parent CYGPKG_IO_SERIAL_MN10300_SERIAL2 + description " + This option specifies the device name port 2 on the MN10300." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BAUD { + display "Baud rate for the MN10300 serial port 2 driver" + type enum + legal_values 50 75 110 134_5 150 200 300 600 1200 1800 2400 3600 4800 7200 9600 14400 19200 38400 57600 115200 234000 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL2 + description " + This option specifies the default baud rate (speed) for the MN10300 port 2." + doc ref/ecos-ref/ecos-device-drivers.html + } + + cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BUFSIZE { + display "Buffer size for the MN10300 serial port 2 driver" + type count + legal_values 0 to 8192 + parent CYGPKG_IO_SERIAL_MN10300_SERIAL2 + description " + This option specifies the size of the internal buffers used for the MN10300 port 2." + doc ref/ecos-ref/ecos-device-drivers.html + } + + }}CFG_DATA */ +#undef CYGPKG_IO_SERIAL_MN10300 +#undef CYGPKG_IO_SERIAL_MN10300_POLLED_MODE +#undef CYGPKG_IO_SERIAL_MN10300_SERIAL0 +#define CYGDAT_IO_SERIAL_MN10300_SERIAL0_NAME "/dev/ser0" +#define CYGNUM_IO_SERIAL_MN10300_SERIAL0_BAUD 38400 +#define CYGNUM_IO_SERIAL_MN10300_SERIAL0_BUFSIZE 128 +#undef CYGPKG_IO_SERIAL_MN10300_SERIAL1 +#define CYGDAT_IO_SERIAL_MN10300_SERIAL1_NAME "/dev/ser1" +#define CYGNUM_IO_SERIAL_MN10300_SERIAL1_BAUD 38400 +#define CYGNUM_IO_SERIAL_MN10300_SERIAL1_BUFSIZE 128 +#undef CYGPKG_IO_SERIAL_MN10300_SERIAL2 +#define CYGDAT_IO_SERIAL_MN10300_SERIAL2_NAME "/dev/ser2" +#define CYGNUM_IO_SERIAL_MN10300_SERIAL2_BAUD 38400 +#define CYGNUM_IO_SERIAL_MN10300_SERIAL2_BUFSIZE 128 + +#endif /* CYGONCE_PKGCONF_IO_SERIAL_H */ +/* EOF io_serial.h */