new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/generic/16x5x/current/ChangeLog
@@ -0,0 +1,211 @@
+2000-09-18  Jesper Skov  <jskov@redhat.com>
+
+	* src/ser_16x5x.c: Allow clients to specify register
+	stepping. Rename a type. Fix compile error.
+
+2000-09-14  Jesper Skov  <jskov@redhat.com>
+
+	* src/ser_16x5x.c: Moved ARM/PID driver to provide generic 16x5x
+	driver. Rewritten to use HAL IO macros. Still needs some polish
+	and configury to properly support all the various target
+	controllers that may only have a partial set of the features.  
+	* cdl/ser_generic_16x5x.cdl: Same.
+
+	* Removed non-PID related ChangeLog entries.
+	
+----------------------------------------------------------------------------
+2000-08-24  Jonathan Larmour  <jlarmour@redhat.co.uk>
+
+	* src/pid_serial_with_ints.c (pid_serial_DSR): Remove accidental
+	OVERRUNERR check duplication
+
+2000-08-01  Jonathan Larmour  <jlarmour@redhat.co.uk>
+
+	* src/pid_serial_with_ints.c: Throughout, add support for line status
+	and modem status callbacks, hardware RTS/CTS and DSR/DTR flow control
+	(pid_serial_set_config): Now use keys to make
+	more flexible.
+
+	* src/pid_serial.h: Add more line status, interrupt status and modem
+	status register definitions
+
+	* cdl/ser_arm_pid.cdl: Implements flow control and line status
+	interfaces
+
+2000-06-22  Hugo Tyson  <hmt@cygnus.co.uk>
+
+	* cdl/<yournamehere>.cdl: Remove the comment on the empty
+	include_files directive; the tools now support this correctly.
+	This keeps internal include files internal.
+
+2000-06-09  Jesper Skov  <jskov@redhat.com>
+
+	* src/pid_serial_with_ints.c: 
+	* src/pid_serial.h: 
+	Cleaned up defines and made DSR handle all received characters.
+	(Dave Airlie (airlied at parthus dot com))
+
+2000-04-11  Hugo Tyson  <hmt@cygnus.co.uk>
+
+	* cdl/ser_arm_pid.cdl: Change the parent from CYGPKG_IO_SERIAL
+	(which is enabled most of the time) to CYGPKG_IO_SERIAL_DEVICES
+	(which is not...) thus allowing convenient control independent of
+	platform.  Also enable all individual devices by default, now, so
+	that they can be enabled simply by enabling the above new parent.
+
+2000-04-07  Hugo Tyson  <hmt@cygnus.co.uk>
+
+	* ecos.db: Re-organize device packages.  This is a massive change
+	involving deleting all the sources for serial and ethernet drivers
+	from where they used to live in
+	    packages/io/serial/current/src/ARCH/PLATFORM.[ch]
+	    packages/net/drivers/eth/PLATFORM/current/src/...
+	and reinstating them in
+	    packages/devs/serial/ARCH/PLATFORM/current/src/...
+	    packages/devs/eth/ARCH/PLATFORM/current/src/...
+
+	All these new packages are properly defined in ecos.db, and are
+	all of type "hardware" so that a "target" can grab them.
+	
+	This directory layout is descriptive of the devices we have right
+	now, arch and platform are separate levels just to make it easier
+	to navigate in the filesystem and similar to the HAL structure in
+	the filesystem.
+
+	It is *not* prescriptive of future work; for example, the mythical
+	common highly-portable 16550 serial driver which works on many
+	targets would be called "devs/serial/s16550/current", or a serial
+	device for a particular board (cogent springs to mind) that can
+	work with different CPUs fitted is "devs/serial/cogent/current".
+
+	Changelogs have been preserved and replicated over all the new
+	packages, so that no history is lost.
+
+	The contents of individual source files are unchanged; they build
+	in just the same emvironment except for a very few cases where the
+	config file name changed in this movement.
+
+	Targets in ecos.db have been redefined to bring in all relevant
+	hardware packages including net and serial drivers (but the newly
+	included packages are only active if their desired parent is
+	available.)
+	
+	The names of CDL options (and their #defines of course) stay the
+	same for the serial drivers, for backward compatibility.
+
+	* templates/*/current.ect: these have had CYGPKG_IO_SERIAL added
+	rather than it being in (almost) all target definitions.
+	
+2000-01-03  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Fix namespace pollution -
+	serial_devio => cyg_io_serial_devio
+
+1999-12-06  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Add loop to handle
+	case where an interrupt represents multiple events.
+
+1999-10-26  Jesper Skov  <jskov@cygnus.co.uk>
+
+	* src/arm/pid_serial.h: Added BE support.
+
+1999-10-25  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial.h (ISR_RxTO): Define - character received but
+	not handled "promptly".
+
+	* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Handle rcv
+	interrupts properly (can't ignore them even with TO bit set).
+
+1999-06-20  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Use #include to get 'diag_printf()'
+	prototypes.
+
+1999-05-14  Jesper Skov  <jskov@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: 
+	* src/arm/pid_serial.h: 
+	Check for receive interrupt before reading.
+
+1999-04-20  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Fix default baud rate if unbuffered.
+
+1999-03-25  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: 
+	Update CDL to follow naming conventions.
+
+	* src/arm/pid_serial_with_ints.c (pid_serial_config_port): Change
+	so that the physical port is not modified unless the provided
+	configuration is valid.
+
+	* src/arm/pid_serial_with_ints.c: 
+	Add configury for baud rate and buffer size.
+
+1999-03-24  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c (pid_serial_stop_xmit): Fix typo
+	in comment.
+
+1999-03-22  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Use CDL configured device names.
+
+1999-03-19  Jesper Skov  <jskov@lassi.cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: 
+	Moved include statement to avoid warnings.
+
+1999-03-18  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: 
+	Update device names to match CDL.
+
+1999-03-17  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Conditionalize based on CDL.
+
+1999-03-15  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Add 'CYGDBG_IO_INIT' for control
+	of init messages.
+
+	* src/arm/pid_serial_with_ints.c: Don't include <cyg/kernel/kapi.h>
+
+1999-03-05  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* src/arm/pid_serial_with_ints.c: Fix interrupt vectors.
+
+1999-03-03  Gary Thomas  <gthomas@cygnus.co.uk>
+
+	* serial/current/src/arm/pid_serial_with_ints.c: 
+	New [somewhat] configurable drivers for PID.
+
+//===========================================================================
+//####COPYRIGHTBEGIN####
+//                                                                          
+// -------------------------------------------                              
+// The contents of this file are subject to the Red Hat eCos Public License 
+// Version 1.1 (the "License"); you may not use this file except in         
+// compliance with the License.  You may obtain a copy of the License at    
+// http://www.redhat.com/                                                   
+//                                                                          
+// Software distributed under the License is distributed on an "AS IS"      
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
+// License for the specific language governing rights and limitations under 
+// the License.                                                             
+//                                                                          
+// The Original Code is eCos - Embedded Configurable Operating System,      
+// released September 30, 1998.                                             
+//                                                                          
+// The Initial Developer of the Original Code is Red Hat.                   
+// Portions created by Red Hat are                                          
+// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
+// All Rights Reserved.                                                     
+// -------------------------------------------                              
+//                                                                          
+//####COPYRIGHTEND####
+//===========================================================================