new file mode 100644
--- /dev/null
+++ b/packages/hal/sh/se77x9/current/ChangeLog
@@ -0,0 +1,161 @@
+2002-05-08  Jesper Skov  <jskov@redhat.com>
+
+	* src/hal_diag.c: Serial register renaming.
+
+2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Indicate support of variable baud rates.
+
+2001-10-18  Jesper Skov  <jskov@redhat.com>
+
+	* src/plf_misc.c (hal_platform_init): Fix option spelling.
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Fix SuperIO CDL option mistake.
+
+2001-10-16  Jesper Skov  <jskov@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Removed DP83902A hack.
+
+2001-10-15  Jesper Skov  <jskov@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Additional requirements to work
+	around problem of inferred values.
+	Added DP83902A hack.
+
+	* src/ser16c550c.c: Get serial controller details from CDL.
+
+	* src/plf_misc.c (hal_platform_init): Only call SuperIO init
+	function if required.
+
+	* include/platform.inc (BSC_settings_table): Initialize for DRAM
+	or SDRAM - but crudely so. Proper configury will be needed
+	eventually, when it's clear how much the SE77X9 boards actually
+	differ.
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Added SE7709RP01 platform
+	support. Added XTAL default option. Added options for serial
+	controller. Added crude option for DRAM/SDRAM. Added option for
+	SuperIO.
+
+2001-09-25  Jesper Skov  <jskov@redhat.com>
+
+	* include/plf_intr.h: Removed dummy
+	CYGPRI_HAL_INTERRUPT_ACKNOWLEDGE_PLF and
+	CYGPRI_HAL_INTERRUPT_CONFIGURE_PLF definitions.
+
+2001-09-13  Jesper Skov  <jskov@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Add CPU option.
+
+2001-09-12  Jesper Skov  <jskov@redhat.com>
+
+	* include/plf_intr.h: Added interrupt controller support.
+
+2001-07-27  Jesper Skov  <jskov@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Generate .eprom.srec of RedBoot
+	image.
+
+2001-06-28  Jesper Skov  <jskov@redhat.com>
+
+	* include/pkgconf/mlt_sh_sh77x9_se77x9_ram.ldi: Leave 128k for
+	RedBoot.
+	* include/pkgconf/mlt_sh_sh77x9_se77x9_ram.mlt: Same.
+	* include/pkgconf/mlt_sh_sh77x9_se77x9_ram.h: Same.
+
+	* misc/redboot_RAM.ecm: Added compression.
+	* misc/redboot_ROM.ecm: Same.
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Don't make relocated .srec file.
+
+2001-06-26  Jesper Skov  <jskov@redhat.com>
+
+	* misc/redboot_RAM.ecm: Reduced stacksize to 6kB.
+	* misc/redboot_ROM.ecm: Same.
+
+2001-06-25  Jesper Skov  <jskov@redhat.com>
+
+	* misc/redboot_RAM.ecm: Updated stack size.
+	* misc/redboot_ROM.ecm: Same.
+
+2001-06-22  Jesper Skov  <jskov@redhat.com>
+
+	* include/platform.inc (SDMR): Fiddled.
+
+2001-06-19  Jesper Skov  <jskov@redhat.com>
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Our board has a 7709S CPU.
+
+	* misc/redboot_ROM.ecm: Don't include CPU variant details.
+	* misc/redboot_RAM.ecm: Same.
+
+2001-06-17  Jesper Skov  <jskov@redhat.com>
+
+	* include/plf_intr.h: Renamed serial interrupts.
+
+	* src/smsc37c93x.c (cyg_hal_init_superIO): Power on COM1. Use
+	correct interrupt.
+
+	* src/ser16c550c.c: Got it enabled. Correct offset and clock.
+
+	* src/hal_diag.c (cyg_hal_plf_comms_init): SuperIO working.
+
+2001-06-16  Jesper Skov  <jskov@redhat.com>
+
+	* include/plf_intr.h: Define external interrupts.
+
+	* misc/redboot_ROM.ecm: Added eth driver.
+	* misc/redboot_RAM.ecm: Same.
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Force IRL interrupt mode. Separate
+	srec output rules for Hitachi Mon (which needs reloc) and for
+	normal RedBoot use.
+
+2001-06-12  Jesper Skov  <jskov@redhat.com>
+
+	* src/smsc37c93x.c: Use 16bit writes.
+
+	* src/ser16c550c.c: Update to access by 16bit units. Can't get it
+	to work though.
+
+	* cdl/hal_sh_sh77x9_se77x9.cdl: Only two serial channels.
+	* src/hal_diag.c: Same.
+
+2001-06-12  Jesper Skov  <jskov@cambridge.redhat.com>
+
+	* New platform HAL.
+
+//===========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//===========================================================================