#ifndef CYGONCE_PKGCONF_SERIAL_MN10300_1_H
#define CYGONCE_PKGCONF_SERIAL_MN10300_1_H
// ====================================================================
//
//	pkgconf/serial_mn10300_1.h
//
//	Device configuration file for mn10300 serial 1
//
// ====================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
// ====================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): 	proven
// Contributors:proven
// Date:	1998-04-24	
// Purpose:	To allow the user to edit device specific configuration
//		for the mn10300 1 serial device.
// Description:
//
//####DESCRIPTIONEND####
//
// ====================================================================

#include <pkgconf/system.h>

#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h>
#endif

/* Only define options if the driver is to be present. */
#ifdef CYGPKG_DEVICES_SERIAL_RS232_MN10300_1

/* ==================================================================== 
 * First we define all the options that are exportable to the user. 
 * These options will show/hide various methods for the class.  
 * These options are always device specific.
 */

/* ---------------------------------------------------------------------
 * Define what kernel mode the driver can support. One must be defined.
 * Both can be defined. 
 */
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_POLLED
#ifdef CYGIMP_KERNEL_INTERRUPTS_DSRS
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_INTERRUPT
#endif

/* ---------------------------------------------------------------------
 * Define if we do diag output. This could possible be another kmode.
 * --proven 19980512
 */
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_ASSERT	

/* ---------------------------------------------------------------------
 * Define the default baudrate and line mode.
 */
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE	19200

/* ---------------------------------------------------------------------
 * Define if non binary terminal protocol modes are needed.
 */
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_READ_MODES
#define CYG_DEVICE_SERIAL_RS232_MN10300_1_WRITE_MODES


#ifdef CYG_DEVICE_INTERNAL
/* ==================================================================== 
 * Now define internal only options. These options dictate the struture
 * of a class but have no effect on the methods declared for a class.
 */

/* ---------------------------------------------------------------------
 * The need for queues is only necessary in interrupt mode.
 */
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_INTERRUPT

/* ---------------------------------------------------------------------
 * Define the number of iorb read buffers the serial read_isr device can 
 * handle at one time. Also define if the device needs to queue more iorbs
 * than what the read_isr can handle.
 */
# define CYG_DEVICE_SERIAL_RS232_READ_BUFFERS	4
# define CYG_DEVICE_SERIAL_RS232_READ_BUFFERS_LL	 

/* ---------------------------------------------------------------------
 * Define the number of iorb write buffers the serial write_isr device can 
 * handle at one time. Also define if the device needs to queue more iorbs
 * than what the write_isr can handle.
 */
# define CYG_DEVICE_SERIAL_RS232_WRITE_BUFFERS	4
# define CYG_DEVICE_SERIAL_RS232_WRITE_BUFFERS_LL	

#endif //  CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_INTERRUPT

/* ==================================================================== 
 * Duplicate the device specific options to device generic options.
 * DO NOT modify these options. Modify the corresponding options above.
 * This is so the internal source files can be compiled from the same 
 * common sources. These defines can never be exported to the user.
 */

/* ---------------------------------------------------------------------
 * Define what kernel mode the driver can support. 
 */
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_INTERRUPT
#define CYG_DEVICE_SERIAL_RS232_KMODE_INTERRUPT	1
#endif

#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_POLLED
#define CYG_DEVICE_SERIAL_RS232_KMODE_POLLED	0
#endif

/* ---------------------------------------------------------------------
 * Define what line modes the driver can support. 
 */
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_LINE_MODES
#define CYG_DEVICE_SERIAL_RS232_LINE_MODES
#endif

/* ---------------------------------------------------------------------
 * Define any terminal protocols need to be supported.
 */
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_READ_MODES
#define CYG_DEVICE_SERIAL_RS232_READ_MODES
#endif

#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_WRITE_MODES
#define CYG_DEVICE_SERIAL_RS232_WRITE_MODES
#endif


#ifdef CYGPKG_KERNEL
/* ---------------------------------------------------------------------
 * Define if a mutex is needed to lock out multiple threads accessing
 * the serial driver. If not defined then it is assumes only one
 * thread will access the driver at a given time.
 */
#define CYG_DEVICE_SERIAL_RS232_MUTEX
#endif /* CYGPKG_KERNEL */

#endif // CYG_DEVICE_INTERNAL

#endif /* ifdef CYGPKG_DEVICES_SERIAL_RS232_MN10300_1 */

#endif  /* CYGONCE_PKGCONF_SERIAL_MN10300_1_H */
/* EOF serial_mn10300_1.h */