* src/fs/fileio.c (do_list): Use getcwd for current directory, rather than "." which may not be implemented in the FS. * src/parse.c (redboot_exec): Conditionalise use of __mem_fault_handler to only be when stubs are included. (error_handler): Ditto for this function. * src/main.c (cyg_start): Conditionalise use of __mem_fault_handler to only be when stubs are included. (do_go): Ditto. (error_handler): Ditto for this function. * src/fs/fileio.c (do_mkdir, do_deldir, do_del, do_write): Added some extra argument checking to these functions. * src/fs/fileio.c (do_mount): Only support -f with "legacy" flash block devices. Clear mount table on failure. (do_move): Silence rename undefined warning. (do_write): Silence warnings. (do_info): Support longer device names. * src/decompress.c (ZLIB_COMPRESSION_OVERHEAD): Increase substantially if jffs2 is present. * src/fs/fileio.c: Fixed some bugs in handling of mounts. The strings used in the mount table must be copied, otherwise the mount table is corrupted by later commands. Also toughened up some error testing. * doc/redboot_cmds.sgml: Added file mode documentation to load command. * doc/redboot_cmds.sgml: Added documentation of filesystem access commands. * src/fs/fileio.c (do_write): Added O_TRUNC to the open call to ensure that the file is resized to fit the new data. * src/fs/fileio.c: Significantly reorganized to present an interface similar to the fis commands. Added a variety of command to manipulate files and directories in a filesystem. * src/parse.c: Added redboot_exec() to provide an internal interface for executing RedBoot commands. Added err_printf() which allows an error message to be printed before longjumping out to an enclosing call to redboot_exec(). Where redboot_exec() is not involved, it just behaves like diag_printf(). * src/main.c: Removed unnecessary delay during startup. Changed diag_printf() in do_go() into err_printf(). * src/load.c: Changed some calls to diag_printf() to err_printf(). * src/net/net_io.c: Changed init priority to RedBoot_INIT_NET. * include/redboot.h: Added some extra initialization priorities. Added prototypes for redboot_exec() and err_printf().

/* 
 * Written 1999-03-19 by Jonathan Larmour, Cygnus Solutions
 * This file is in the public domain and may be used for any purpose
 */

/* CONFIGURATION CHECKS */

#include <pkgconf/system.h>     /* which packages are enabled/disabled */
#ifdef CYGPKG_KERNEL
# include <pkgconf/kernel.h>
#endif
#ifdef CYGPKG_LIBC
# include <pkgconf/libc.h>
#endif
#ifdef CYGPKG_IO_SERIAL
# include <pkgconf/io_serial.h>
#endif

#ifndef CYGFUN_KERNEL_API_C
# error Kernel API must be enabled to build this example
#endif

#ifndef CYGPKG_LIBC_STDIO
# error C library standard I/O must be enabled to build this example
#endif

#ifndef CYGPKG_IO_SERIAL_HALDIAG
# error I/O HALDIAG pseudo-device driver must be enabled to build this example
#endif

/* INCLUDES */

#include <stdio.h>                      /* printf */
#include <string.h>                     /* strlen */
#include <cyg/kernel/kapi.h>            /* All the kernel specific stuff */
#include <cyg/io/io.h>                  /* I/O functions */
#include <cyg/hal/hal_arch.h>           /* CYGNUM_HAL_STACK_SIZE_TYPICAL */



/* DEFINES */

#define NTHREADS 1
#define STACKSIZE ( CYGNUM_HAL_STACK_SIZE_TYPICAL + 4096 )

/* STATICS */

static cyg_handle_t thread[NTHREADS];
static cyg_thread thread_obj[NTHREADS];
static char stack[NTHREADS][STACKSIZE];

/* FUNCTIONS */

static void simple_prog(CYG_ADDRESS data)
{
    cyg_io_handle_t handle;
    Cyg_ErrNo err;
    const char test_string[] = "serial example is working correctly!\n";
    cyg_uint32 len = strlen(test_string);

    printf("Starting serial example\n");

    err = cyg_io_lookup( "/dev/haldiag", &handle );

    if (ENOERR == err) {
        printf("Found /dev/haldiag. Writing string....\n");
        err = cyg_io_write( handle, test_string, &len );
    }
        
    if (ENOERR == err) {
        printf("I think I wrote the string. Did you see it?\n");
    }
    
    printf("Serial example finished\n");

}

void cyg_user_start(void)
{
    cyg_thread_create(4, simple_prog, (cyg_addrword_t) 0, "serial",
                      (void *)stack[0], STACKSIZE, &thread[0], &thread_obj[0]);
    cyg_thread_resume(thread[0]);
}