# ====================================================================
#
#      net.cdl
#
#      Networking configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      gthomas
# Original data:  gthomas
# Contributors:
# Date:           1999-11-29
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_NET {
    display       "Networking"
    doc           doc/index.html
    include_dir   .
    requires      CYGPKG_IO
    requires      CYGPKG_ISOINFRA
    requires      CYGPKG_LIBC_TIME
    requires      CYGPKG_ERROR
    requires      CYGPKG_MEMALLOC
    description   "Basic networking support, including TCP/IP."

    # Export our types to <sys/types.h>
    implements    CYGINT_ISO_BSDTYPES
    requires      { CYGBLD_ISO_BSDTYPES_HEADER == "<sys/bsdtypes.h>" }
    
    compile ecos/support.c \
	ecos/timeout.c \
        ecos/init.cxx \
        sys/kern/uipc_mbuf.c \
	sys/kern/uipc_domain.c \
	sys/kern/uipc_socket.c \
	sys/kern/uipc_socket2.c \
	sys/kern/kern_subr.c \
	sys/net/if.c \
	sys/net/rtsock.c \
	sys/net/raw_cb.c \
	sys/net/raw_usrreq.c \
	sys/net/route.c \
	sys/net/radix.c \
	sys/net/if_ethersubr.c \
	sys/net/if_loop.c \
	sys/net/if_bridge.c \
	sys/netinet/igmp.c \
	sys/netinet/raw_ip.c \
	sys/netinet/in.c  \
	sys/netinet/in_cksum.c \
	sys/netinet/in_pcb.c \
	sys/netinet/in_proto.c \
	sys/netinet/ip_id.c \
	sys/netinet/ip_icmp.c \
	sys/netinet/ip_input.c \
	sys/netinet/ip_output.c \
	sys/netinet/if_ether.c \
	sys/netinet/udp_usrreq.c \
	sys/netinet/tcp_input.c \
	sys/netinet/tcp_output.c \
	sys/netinet/tcp_subr.c \
	sys/netinet/tcp_debug.c \
	sys/netinet/tcp_usrreq.c \
	sys/netinet/tcp_timer.c \
	lib/inet_addr.c \
	lib/bootp_support.c \
	lib/dhcp_support.c \
	lib/dhcp_prot.c \
	lib/network_support.c \
	lib/getproto.c \
	lib/getserv.c \
	lib/gethost.c


    cdl_option CYGPKG_NET_API_LOCAL {
	display "Implement the socket API locally"
	flavor bool
	active_if !CYGPKG_IO_FILEIO
	default_value 1
	
	compile sys/kern/uipc_syscalls.c \
        sys/kern/sys_socket.c \
        sys/kern/sys_generic.c \
	lib/socket.c \
	lib/close.c \
	lib/read.c \
	lib/write.c \
	lib/bind.c \
	lib/connect.c \
	lib/accept.c \
	lib/listen.c \
	lib/shutdown.c \
	lib/sendto.c \
	lib/recvfrom.c \
	lib/getsockname.c \
	lib/getpeername.c \
	lib/getsockopt.c \
	lib/setsockopt.c \
	lib/ioctl.c \
	lib/select.c

	description "
	    This option controls support for the network-stack supplied
	    API."
    }

    cdl_option CYGPKG_NET_API_FILEIO {
	display "Implement the socket API via Fileio package"
	active_if CYGPKG_IO_FILEIO
	default_value 1

	compile -library=libextras.a sys/kern/sockio.c

	description "
	    This option controls support for the fileio subsystem supplied API."
    }

    cdl_component CYGPKG_NET_INET {
        display "INET support"
        flavor  bool
        no_define
        default_value 1
        description   "
            This option enables support for INET (IP) network processing."

        cdl_option CYGPKG_NET_INET6 {
            display "IPv6 support"
            flavor  bool
            default_value 0
            description   "
                This option enables support for new IPv6."
            define_proc {
                puts $::cdl_header "#define INET6"
            }
        }

        cdl_option CYGPKG_NET_ROUTING {
            display "Routing support"
            flavor  bool
            no_define
            default_value 0
            description   "
                This option enables support for packet routing."
            define_proc {
                puts $::cdl_header "#define MROUTING"
            }
        }

        define_proc {
            puts $::cdl_header "#define INET"
        }
    }

    cdl_component CYGPKG_NET_TFTP {
        display        "TFTP (RFC-1350) support"
        flavor         bool
        default_value  1
        compile        lib/tftp_client.c \
                       lib/tftp_server.c
        description    "
          This option provides additional library support for
          the TFTP (Trivial File Transfer Protocol)."

	cdl_option CYGPKG_NET_TFTPD_THREAD_PRIORITY {
	    display "Priority level for TFTP daemon thread."
	    flavor  data
	    default_value 10
	    description   "
	    This option allows the thread priority level used by the
	    TFTP server thread to be adjusted by the user.  It should be set
	    high enough that sufficient CPU resources are available to
	    process network data, but may be adjusted so that application
	    threads can have precedence over TFTP server processing."
	}

        cdl_option CYGPKG_NET_TFTP_FILE_ACCESS {
            display       "File I/O functions for TFTP server"
            flavor        bool
            default_value 1
            compile       lib/tftp_dummy_file.c
            description   "
              Minimal in-memory file I/O support for TFTP server."
        }
    }

    cdl_component CYGPKG_NET_DHCP {
	display "Use full DHCP instead of BOOTP"
	active_if (CYGHWR_NET_DRIVERS > 0)
	flavor bool
	default_value 1
	description "
	    Provide DHCP for initializing the IP address
	    of network interfaces.  The DHCP client is capable of falling
	    back to BOOTP usage if the server does not support DHCP, so it
	    should never be necessary to disable this option.  However,
	    depending on other configuration the DHCP client may provide or
	    require a kernel thread of its own; this consumes quite a lot
	    of resource which a BOOTP solution does not require."

	cdl_option CYGOPT_NET_DHCP_DHCP_THREAD {
	    display "DHCP management thread"
	    flavor bool
	    default_value 1
	    description "
	        Provide a separate thread to renew DHCP leases; otherwise
	        the application MUST periodically examine the semaphore
	        dhcp_needs_attention and call dhcp_bind() if it is
	        signalled.  If enabled, this thread does all that for you.
	        Independent of this option, initialization of the
	        interfaces still occurs in init_all_network_interfaces()
	        and your startup code must call that.  It will start the
	        DHCP management thread if necessary.  If a lease fails to
	        be renewed, the management thread will shut down all
	        interfaces and attempt to initialize all the interfaces
	        again from scratch.  This may cause application problems,
	        in which case managing the DHCP state in an application
	        aware thread is recommended.  See comments in dhcp.h"
	}

	cdl_option CYGOPT_NET_DHCP_DHCP_THREAD_PARAM {
	    display "DHCP management thread loops forever"
	    flavor  data
	    default_value 0
	    active_if CYGOPT_NET_DHCP_DHCP_THREAD
	    description "
	        If the parameter is nonzero, it loops forever; if zero,
	        the thread exits if a lease expires, and the application
	        must detect this and tidy up or reboot the whole machine."
	}
    }

    cdl_option CYGPKG_NET_SYSCTL {
        display "Support BSD 'sysctl()' function"
        flavor  bool
        default_value 0
        description   "
            This option includes support for the 'sysctl()' functions."
    }

    cdl_option CYGPKG_NET_THREAD_PRIORITY {
        display "Priority level for backgound network processing."
        flavor  data
        default_value 7
        description   "
            This option allows the thread priority level used by the
	networking stack to be adjusted by the user.  It should be set
	high enough that sufficient CPU resources are available to
	process network data, but may be adjusted so that application
	threads can have precedence over network processing."
    }

    cdl_option CYGPKG_NET_NBPF {
        display "Number of BPF filters"
        flavor  data
        default_value 0
        description   "
            This option controls the number of active BPF filters."
        define_proc {
            puts $::cdl_header "#define NBPFILTER CYGPKG_NET_NBPF"
        }
    }

    cdl_option CYGPKG_NET_NBRIDGE {
        display "Number of bridge buffers?"
        flavor  data
        default_value 0
        description   "
            This option controls the number of bridge buffers and indeed
	    whether bridging code is enabled at all via 'standard'
	    symbol NBRIDGE."
        define_proc {
            puts $::cdl_header "#define NBRIDGE CYGPKG_NET_NBRIDGE"
        }
    }

    cdl_option CYGPKG_NET_NGIF {
        display "Number of GIF things"
        flavor  data
        default_value 0
        description   "
            This option controls the number of active GIF things."
        define_proc {
            puts $::cdl_header "#define NGIF CYGPKG_NET_NGIF"
        }
    }

    cdl_option CYGPKG_NET_NLOOP {
        display "Number of loopback interfaces"
        flavor  data
        default_value 1
	requires { (CYGPKG_NET_NLOOP > 1) ? CYGPKG_LIBC_STDIO : 1  }
        description   "
            This option controls the number of loopback, i.e. local, interfaces.
            There is seldom need for this value to be anything other than one.
            If a different value is required, then the C library STDIO package
            is required for sprintf()."
        define_proc {
            puts $::cdl_header "#define NLOOP CYGPKG_NET_NLOOP"
        }
    }

    cdl_option CYGPKG_NET_MEM_USAGE {
        display "Memory designated for networking buffers."
        flavor  data
        default_value 256*1024
        description   "
            This option controls the amount of memory pre-allocated
	for buffers used by the networking code."
    }

    cdl_option CYGPKG_NET_NUM_WAKEUP_EVENTS {
        display "Number of supported pending network events"
        flavor  data
        default_value 8
        description   "
            This option controls the number of pending network events
	used by the networking code."
    }

    cdl_component CYGPKG_NET_OPTIONS {
        display "Networking support build options"
        flavor  none
	no_define

        cdl_option CYGPKG_NET_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "-D_KERNEL -D__ECOS" }
            description   "
                This option modifies the set of compiler flags for
                building the networking package.
	        These flags are used in addition
                to the set of global flags."
        }

        cdl_option CYGPKG_NET_CFLAGS_REMOVE {
            display "Suppressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the networking package. These flags are removed from
                the set of global flags if present."
        }
    }

    cdl_component CYGPKG_NET_BUILD_TESTS {
	display "Build networking tests (demo programs)"
	flavor  bool
	no_define
	default_value 0
	description   "
	This option enables the building of additional network tests
	which at this time are just demos; otherwise only loopback
	interface tests will be built."

	cdl_option CYGPKG_NET_TESTS {
	    display "Networking tests"
	    flavor  data
	    no_define
	    calculated { CYGPKG_NET_BUILD_TESTS ? \
		    "tests/mbuf_test \
		    tests/socket_test \
		    tests/ftp_test \
		    tests/server_test \
		    tests/nc_test_master \
		    tests/nc_test_slave \
		    tests/tftp_client_test \
		    tests/tftp_server_test \
		    tests/tcp_echo \
		    tests/set_mac_address \
		    tests/bridge \
		    tests/flood \
		    tests/ping_test \
		    tests/dhcp_test \
		    tests/ping_lo_test \
		    tests/tcp_lo_test \
		    tests/udp_lo_test \
		    tests/multi_lo_select \
		    tests/tcp_lo_select"
	    :
	            "tests/ping_lo_test \
		    tests/tcp_lo_test \
		    tests/udp_lo_test \
		    tests/multi_lo_select \
		    tests/tcp_lo_select"
	}
	    description   "
	    This option specifies the set of tests
	    for the networking package."
	}
	
	cdl_option CYGPKG_NET_TESTS_USE_RT_TEST_HARNESS {
	    display "Use real-time response test harness (if available)"
	    default_value 0
	    description "
		    Platform and/or ethernet device driver packages may
		    provide a test harness to verify that interrupts are
		    not disabled or flooded for too long during a test.  If
		    such is provided, CYGTST_DEVS_ETH_TEST_NET_REALTIME is
		    defined and can be #include'd to acquire the support.
		    Some tests in the TCP/IP stack can use this harness;
		    this option controls whether they do.  The StrongARM
		    EBSA285 Ethernet device driver is one package that
		    provides such a harness.  See the file
		    tests/test_net_realtime.h in there for details."
	}
    }

# Description and control over different interfaces

    cdl_interface CYGHWR_NET_DRIVERS {
        display "Network drivers"
    }

    cdl_interface CYGHWR_NET_DRIVER_ETH0 {
        display "Does the hardware provide an 'eth0' device?"
    }

    cdl_component CYGHWR_NET_DRIVER_ETH0_SETUP_OPTIONS {
        display "Initialization options for 'eth0'"
        active_if (CYGHWR_NET_DRIVER_ETH0 == 1)
        flavor none
        no_define

        cdl_interface CYGHWR_NET_DRIVER_ETH0_SETUP {
            display "Initialization options for 'eth0'"
            requires 1 == CYGHWR_NET_DRIVER_ETH0_SETUP
            no_define
        }

        cdl_component CYGHWR_NET_DRIVER_ETH0_MANUAL {
            display "Initialize 'eth0' manually?"
            default_value 0
            implements CYGHWR_NET_DRIVER_ETH0_SETUP
	    description "
	        If this option is selected, the eCos library provides no
	        initialization code for this interface; you must perform
	        all the initialization in the application, by means of
	        appropriate ioctl() calls, or by calling init_net() with an
	        appropriate bootp record you have constructed yourself."
        }

        cdl_component CYGHWR_NET_DRIVER_ETH0_BOOTP {
            display "Use BOOTP/DHCP to initialize 'eth0'?"
            default_value 1
            implements CYGHWR_NET_DRIVER_ETH0_SETUP	
	    description "
	        If this option is selected, init_all_network_interfaces()
	        will use DHCP or BOOTP to acquire initialization data for
	        this interface, and then set it up accordingly."

            cdl_option CYGHWR_NET_DRIVER_ETH0_DHCP {
                display "Use DHCP rather than BOOTP for 'eth0'?"
                flavor  bool
                default_value 1
		active_if CYGPKG_NET_DHCP
            }

            cdl_option CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW {
                display "Show BOOTP/DHCP initialization values?"
                flavor  bool
                default_value 1
            }
        }

        cdl_component CYGHWR_NET_DRIVER_ETH0_ADDRS {
            display "Address setups for 'eth0'"
            implements CYGHWR_NET_DRIVER_ETH0_SETUP	
            no_define

	    description "
	        These options let you configure all the initialization data
	        that init_all_network_interfaces() will use
	        for 'eth0' statically.  Be careful when doing this, because
	        if you run the same application image on multiple boards,
	        they will have identical IP addresses and so on; this is a
	        Bad Thing.
	        The values you set are inserted in a bootp-style record
	        that is fed into a common setup routine to configure the
	        interface.  That routine does not in fact use the 'Server
	        IP address' field.
	        The bootp record is also available to application code, and
	        some eCos networking test programs use the 'Server IP
	        address' field to mean 'a machine we can interact with' for
	        example to ping or perform ftp with.  That is the rationale
	        for its inclusion here.
	        The gateway address is used to set up a default route if
	        nonzero.  If you have more than one interface, setting up
	        more than one default route is will cause malfunctions.  A
	        gateway address of 0.0.0.0 can be set to prevent that route
	        setup.  Of course, your application can add real routes
	        once the interface(s) initialization is complete."

            cdl_option CYGHWR_NET_DRIVER_ETH0_ADDRS_IP {
                display "IP address for 'eth0'"
                flavor  data
                default_value { "192.168.1.2" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH0_ADDRS_NETMASK {
                display "Network mask address for 'eth0'"
                flavor  data
                default_value { "255.255.255.0" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH0_ADDRS_BROADCAST {
                display "Broadcast address for 'eth0'"
                flavor  data
                default_value { "192.168.1.255" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH0_ADDRS_GATEWAY {
                display "Gateway/router IP address for 'eth0'"
                flavor  data
                default_value { "192.168.1.1" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH0_ADDRS_SERVER {
                display "Server IP address for 'eth0'"
                flavor  data
                default_value { "192.168.1.101" }
            }
        }
    }

    cdl_interface CYGHWR_NET_DRIVER_ETH1 {
        display "Does the hardware provide an 'eth1' device?"
    }

    cdl_component CYGHWR_NET_DRIVER_ETH1_SETUP_OPTIONS {
        display "Initialization options for 'eth1'"
        active_if (CYGHWR_NET_DRIVER_ETH1 == 1)
        flavor none
        no_define

        cdl_interface CYGHWR_NET_DRIVER_ETH1_SETUP {
            display "Initialization options for 'eth1'"
            requires 1 == CYGHWR_NET_DRIVER_ETH1_SETUP
            no_define
        }

        cdl_component CYGHWR_NET_DRIVER_ETH1_MANUAL {
            display "Initialize 'eth1' manually?"
            default_value 0
            implements CYGHWR_NET_DRIVER_ETH1_SETUP	
	    description "
	        If this option is selected, the eCos library provides no
	        initialization code for this interface; you must perform
	        all the initialization in the application, by means of
	        appropriate ioctl() calls, or by calling init_net() with an
	        appropriate bootp record you have constructed yourself."
        }

        cdl_component CYGHWR_NET_DRIVER_ETH1_BOOTP {
            display "Use BOOTP/DHCP to initialize 'eth1'?"
            default_value 1
            implements CYGHWR_NET_DRIVER_ETH1_SETUP	
	    description "
	        If this option is selected, init_all_network_interfaces()
	        will use DHCP or BOOTP to acquire initialization data for
	        this interface, and then set it up accordingly."

            cdl_option CYGHWR_NET_DRIVER_ETH1_DHCP {
                display "Use DHCP rather than BOOTP for 'eth1'?"
                flavor  bool
                default_value 1
		active_if CYGPKG_NET_DHCP
            }

            cdl_option CYGHWR_NET_DRIVER_ETH1_BOOTP_SHOW {
                display "Show BOOTP/DHCP initialization values?"
                flavor  bool
                default_value 1
            }
        }

        cdl_component CYGHWR_NET_DRIVER_ETH1_ADDRS {
            display "Address setups for 'eth1'"
            implements CYGHWR_NET_DRIVER_ETH1_SETUP	
            no_define

	    description "
	        These options let you configure all the initialization data
	        that init_all_network_interfaces() will use
	        for 'eth1' statically.  Be careful when doing this, because
	        if you run the same application image on multiple boards,
	        they will have identical IP addresses and so on; this is a
	        Bad Thing.
	        The values you set are inserted in a bootp-style record
	        that is fed into a common setup routine to configure the
	        interface.  That routine does not in fact use the 'Server
	        IP address' field.
	        The bootp record is also available to application code, and
	        some eCos networking test programs use the 'Server IP
	        address' field to mean 'a machine we can interact with' for
	        example to ping or perform ftp with.  That is the rationale
	        for its inclusion here.
	        The gateway address is used to set up a default route if
	        nonzero.  If you have more than one interface, setting up
	        more than one default route is will cause malfunctions.  A
	        gateway address of 0.0.0.0 can be set to prevent that route
	        setup.  Of course, your application can add real routes
	        once the interface(s) initialization is complete.
	        This interface 'eth1' has no route set up in the default
	        configuration."

            cdl_option CYGHWR_NET_DRIVER_ETH1_ADDRS_IP {
                display "IP address for 'eth1'"
                flavor  data
                default_value { "192.168.1.2" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH1_ADDRS_NETMASK {
                display "Network mask address for 'eth1'"
                flavor  data
                default_value { "255.255.255.0" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH1_ADDRS_BROADCAST {
                display "Broadcast address for 'eth1'"
                flavor  data
                default_value { "192.168.1.255" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH1_ADDRS_GATEWAY {
                display "Gateway/router IP address for 'eth1'"
                flavor  data
                default_value { "0.0.0.0" }
            }

            cdl_option CYGHWR_NET_DRIVER_ETH1_ADDRS_SERVER {
                display "Server IP address for 'eth1'"
                flavor  data
                default_value { "192.168.1.101" }
            }
        }
    }
}