//==========================================================================
//
//      drv_api.c
//
//      Driver API for non-kernel configurations
//
//==========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998, 1999 Cygnus Solutions.  
// All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   Nick Garnett
// Date:        1999-02-24
// Purpose:     Driver API for non-kernel configurations
// Description: These functions are used to support drivers when the kernel
//              is not present.
//              
//              
//
//####DESCRIPTIONEND####
//
//==========================================================================

#include <pkgconf/system.h>

#ifndef CYGPKG_KERNEL

#include <cyg/infra/cyg_type.h>
#include <cyg/infra/cyg_trac.h>
#include <cyg/infra/cyg_ass.h>

#include <pkgconf/hal.h>
#include <cyg/hal/drv_api.h>

#include <cyg/hal/hal_arch.h>
#include <cyg/hal/hal_intr.h>

//--------------------------------------------------------------------------
// Statics

static volatile cyg_int32 isr_disable_counter;  // ISR disable counter

volatile cyg_int32 dsr_disable_counter asm("cyg_scheduler_sched_lock");  // DSR disable counter

static volatile cyg_interrupt *dsr_list;        // List of pending DSRs

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

cyg_interrupt *chain_list[CYGNUM_HAL_ISR_COUNT];

#endif

//--------------------------------------------------------------------------
// DSR handling functions.
// post_dsr() places a DSR on the list of DSRs to be called.
// call_dsrs() calls the DSRs.

static void post_dsr( cyg_interrupt *intr )
{
    CYG_INTERRUPT_STATE old_intr;

    CYG_REPORT_FUNCTION();

    HAL_DISABLE_INTERRUPTS(old_intr);

        if( intr->dsr_count++ == 0 )
    {
        intr->next_dsr = dsr_list;
        dsr_list = intr;
    }

    HAL_RESTORE_INTERRUPTS(old_intr);

    CYG_REPORT_RETURN();    
}

static void call_dsrs(void)
{
    CYG_REPORT_FUNCTION();
    
    while( dsr_list != NULL )
    {
        volatile cyg_interrupt *intr;
        cyg_int32 count;
        CYG_INTERRUPT_STATE old_intr;

        HAL_DISABLE_INTERRUPTS(old_intr);
        
        intr = dsr_list;
        dsr_list = intr->next_dsr;
        count = intr->dsr_count;
        intr->dsr_count = 0;
        
        HAL_RESTORE_INTERRUPTS(old_intr);

        intr->dsr( intr->vector, count, (CYG_ADDRWORD)intr->data );
    }

    CYG_REPORT_RETURN();
    
}

//--------------------------------------------------------------------------
// This is referenced from the HAL, although it does not actually get called.

externC void
cyg_interrupt_call_pending_DSRs(void)
{
    call_dsrs();
}


//--------------------------------------------------------------------------
// Interrupt end function called from HAL VSR to tidy up. This is where
// DSRs will be called if necessary.

externC void
interrupt_end(
    cyg_uint32          isr_ret,
    cyg_interrupt       *intr,
    HAL_SavedRegisters  *regs
    )
{
    CYG_REPORT_FUNCTION();
    
#ifndef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

    // Only do this if we are in a non-chained configuration.
    // If we are chained, then chain_isr will do the DSR
    // posting.
    
    if( isr_ret & CYG_ISR_CALL_DSR && intr != NULL ) post_dsr(intr);

#endif

    if( dsr_disable_counter == 0 ) call_dsrs();

    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// ISR for handling chained interrupts.

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

cyg_uint32 chain_isr(cyg_vector_t vector, CYG_ADDRWORD data)
{
    CYG_REPORT_FUNCTION();
 
    cyg_interrupt *p = *(cyg_interrupt **)data;

    while( p != NULL )
    {
        if( p->vector == vector )
        {
            register cyg_uint32 isr_ret = p->isr(vector, p->data);

            if( isr_ret & CYG_ISR_CALL_DSR ) post_dsr(p);

            if( isr_ret & CYG_ISR_HANDLED ) break;
        }

        p = p->next;
    }

    CYG_REPORT_RETURN();
    
    return 0;
}

#endif

//--------------------------------------------------------------------------
// ISR lock. This disables interrupts and keeps a count of the number
// times it has been called.

externC void cyg_drv_isr_lock()
{
    CYG_INTERRUPT_STATE dummy;

    CYG_REPORT_FUNCTION();

    HAL_DISABLE_INTERRUPTS(dummy);

    CYG_ASSERT( isr_disable_counter >= 0 , "Disable counter negative");
    
    isr_disable_counter++;
    
    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// Unlock ISRs. This decrements the count and re-enables interrupts if it
// goes zero.

externC void cyg_drv_isr_unlock()
{
    CYG_REPORT_FUNCTION();
        
    CYG_ASSERT( isr_disable_counter > 0 , "Disable counter not greater than zero");
    
    isr_disable_counter--;

    if ( isr_disable_counter == 0 )
    {
        HAL_ENABLE_INTERRUPTS();
    }

    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Lock DSR lock. Simply increment the counter.

externC void cyg_drv_dsr_lock()
{
    CYG_REPORT_FUNCTION();

    dsr_disable_counter++;

    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Unlock DSR lock. If the counter is about to go zero, call any pending
// DSRs and then zero the counter.

externC void cyg_drv_dsr_unlock()
{
    CYG_REPORT_FUNCTION();

    do
    {
        if( dsr_disable_counter == 1 )
        {
            call_dsrs();
        }

        HAL_REORDER_BARRIER();
        
        dsr_disable_counter = 0;

        HAL_REORDER_BARRIER();

        // Check that no DSRs have been posted between calling
        // call_dsrs() and zeroing dsr_disable_counter. If so,
        // loop back and call them.
        
        if( dsr_list != NULL )
        {
            dsr_disable_counter = 1;
            continue;
        }

        CYG_REPORT_RETURN();
        
        return;
        
    } while(1);

    CYG_FAIL( "Should not be executed" );
}

//--------------------------------------------------------------------------
// Initialize a mutex.

externC void cyg_drv_mutex_init( cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();
    
    mutex->lock = 0;

    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// Destroy a mutex.

externC void cyg_drv_mutex_destroy( cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();
    
    mutex->lock = -1;

    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// Lock a mutex. We check that we are not trying to lock a locked or
// destroyed mutex and if not, set it locked.

externC cyg_bool_t cyg_drv_mutex_lock( cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();
    
    CYG_ASSERT( mutex->lock == 0 , "Trying to lock locked mutex");

    mutex->lock = 1;

    CYG_REPORT_RETURN();

    return true;
}

//--------------------------------------------------------------------------
// Attempt to claim a mutex, and return if it cannot be.

externC cyg_bool_t cyg_drv_mutex_trylock( cyg_drv_mutex_t *mutex )
{
    cyg_bool_t result = true;
    
    CYG_REPORT_FUNCTION();

    if( mutex->lock == 1 ) result = false;
    
    CYG_REPORT_RETURN();

    return result;
}

//--------------------------------------------------------------------------
// Unlock a mutex. We check that the mutex is actually locked before doing
// this.

externC void cyg_drv_mutex_unlock( cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();

    CYG_ASSERT( mutex->lock == 1 , "Trying to unlock unlocked mutex");

    mutex->lock = 0;
    
    CYG_REPORT_RETURN();    
}
    
//--------------------------------------------------------------------------
// Release all threads waiting for the mutex.
// This is really for threads, so we do nothing here.

externC void cyg_drv_mutex_release( cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();


    
    CYG_REPORT_RETURN();    
}
    

//--------------------------------------------------------------------------
// Initialized a condition variable.

externC void cyg_drv_cond_init( cyg_drv_cond_t  *cond, cyg_drv_mutex_t *mutex )
{
    CYG_REPORT_FUNCTION();

    cond->wait = 0;
    cond->mutex = mutex;
    
    CYG_REPORT_RETURN();    
}
    

//--------------------------------------------------------------------------
// Destroy a condition variable.

externC void cyg_drv_cond_destroy( cyg_drv_cond_t  *cond )
{
    CYG_REPORT_FUNCTION();

    cond->wait = -1;
    cond->mutex = NULL;
    
    CYG_REPORT_RETURN();    
}
    
// -------------------------------------------------------------------------
// Wait for a condition variable to be signalled. We simply busy wait
// polling the condition variable's wait member until a DSR sets it to
// 0.  Note that the semantics of condition variables means that the
// wakeup only happens if there is a thread actually waiting on the CV
// when the signal is sent.

externC void cyg_drv_cond_wait( cyg_drv_cond_t *cond )
{
    CYG_REPORT_FUNCTION();

    CYG_ASSERT( cond->mutex != NULL, "Uninitialized condition variable");
    CYG_ASSERT( cond->mutex->lock, "Mutex not locked");

    cyg_drv_dsr_lock();
    
    cond->wait = 1;
       
    while( cond->wait == 1 )
    {
        // While looping we call call_dsrs() to service any DSRs that
        // get posted. One of these will make the call to cond_signal
        // to break us out of this loop. If we do not have the DSR
        // lock claimed, then a race condition could occur and keep us
        // stuck here forever.
        
        call_dsrs();
    }

    cyg_drv_dsr_unlock();
    
    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// Signal a condition variable. This sets the wait member to zero, which
// has no effect when there is no waiter, but will wake up any waiting
// thread.

externC void cyg_drv_cond_signal( cyg_drv_cond_t *cond )
{
    CYG_REPORT_FUNCTION();

    cond->wait = 0;
    
    CYG_REPORT_RETURN();    
}
    

//--------------------------------------------------------------------------
// Broadcast to condition variable. This is exactly the same a signal since
// there can only be one waiter.

externC void cyg_drv_cond_broadcast( cyg_drv_cond_t *cond )
{
    CYG_REPORT_FUNCTION();

    cond->wait = 0;
    
    CYG_REPORT_RETURN();    
}
    

//--------------------------------------------------------------------------
// Create an interrupt object.

externC void cyg_drv_interrupt_create(
                     cyg_vector_t        vector,
                     cyg_priority_t      priority,
                     cyg_addrword_t      data,
                     cyg_ISR_t           *isr,
                     cyg_DSR_t           *dsr,
                     cyg_handle_t        *handle,
                     cyg_interrupt       *intr
                     )
{
    CYG_REPORT_FUNCTION();

    intr->vector        = vector;
    intr->priority      = priority;
    intr->isr           = isr;
    intr->dsr           = dsr;
    intr->data          = data;
    intr->next_dsr      = NULL;
    intr->dsr_count     = 0;

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

    intr->next          = NULL;
    
#endif    

    *handle = (cyg_handle_t)intr;
    
    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Delete an interrupt object. This merely ensures that it is detached from
// the vector.

externC void cyg_drv_interrupt_delete( cyg_handle_t interrupt )
{
    CYG_REPORT_FUNCTION();

    cyg_drv_interrupt_detach( interrupt );
    
    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// 

externC void cyg_drv_interrupt_attach( cyg_handle_t interrupt )
{
    cyg_interrupt *intr = (cyg_interrupt *)interrupt;
    
    CYG_REPORT_FUNCTION();

    CYG_ASSERT( intr->vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");
    CYG_ASSERT( intr->vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

    HAL_INTERRUPT_SET_LEVEL( intr->vector, intr->priority );
    
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

    CYG_ASSERT( intr->next == NULL , "cyg_interrupt already on a list");

    cyg_uint32 index;

    HAL_TRANSLATE_VECTOR( intr->vector, index );

    if( chain_list[index] == NULL )
    {
        // First Interrupt on this chain, just assign it and register
        // the chain_isr with the HAL.
        
        chain_list[index] = intr;

        HAL_INTERRUPT_ATTACH( intr->vector, chain_isr, &chain_list[index], NULL );
    }
    else
    {
        // There are already interrupts chained, add this one into the
        // chain in priority order.
        
        Cyg_Interrupt **p = &chain_list[index];

        while( *p != NULL )
        {
            cyg_interrupt *n = *p;

            if( n->priority < intr->priority ) break;
            
            p = &n->next;
        }
        next = *p;
        *p = intr;
    }
    
#else
    
    HAL_INTERRUPT_ATTACH( intr->vector, intr->isr, intr->data, intr );

#endif    
    
    CYG_REPORT_RETURN();    
}
   

//--------------------------------------------------------------------------
// Detach an interrupt from its vector.

externC void cyg_drv_interrupt_detach( cyg_handle_t interrupt )
{
    cyg_interrupt *intr = (cyg_interrupt *)interrupt;
    
    CYG_REPORT_FUNCTION();

    CYG_ASSERT( intr->vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( intr->vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

    // Remove the interrupt object from the vector chain.
    
    cyg_uint32 index;

    HAL_TRANSLATE_VECTOR( vector, index );

    cyg_interrupt **p = &chain_list[index];

    while( *p != NULL )
    {
        cyg_interrupt *n = *p;

        if( n == intr )
        {
            *p = intr->next;
            break;
        }
            
        p = &n->next;
    }

    // If this was the last one, detach the vector.
    
    if( chain_list[index] == NULL )
        HAL_INTERRUPT_DETACH( intr->vector, chain_isr );
    
#else
    
    HAL_INTERRUPT_DETACH( intr->vector, intr->isr );

#endif
    
    CYG_REPORT_RETURN();    
}
    

//--------------------------------------------------------------------------
// Mask delivery of an interrupt at the interrupt controller.

externC void cyg_drv_interrupt_mask( cyg_vector_t vector )
{
    CYG_REPORT_FUNCTION();
    CYG_REPORT_FUNCARG1("vector=%d", vector);

    CYG_ASSERT( vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

    HAL_INTERRUPT_MASK( vector );

    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Unmask delivery of an interrupt at the interrupt controller.

externC void cyg_drv_interrupt_unmask( cyg_vector_t vector )
{
    CYG_REPORT_FUNCTION();

    CYG_ASSERT( vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");
    
    HAL_INTERRUPT_UNMASK( vector );

    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Acknowledge an interrupt at the controller to allow another interrupt
// to be delivered.

externC void cyg_drv_interrupt_acknowledge( cyg_vector_t vector )
{
//    CYG_REPORT_FUNCTION();

    CYG_ASSERT( vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

    HAL_INTERRUPT_ACKNOWLEDGE( vector );

//    CYG_REPORT_RETURN();    
}

//--------------------------------------------------------------------------
// Configure interrupt detection parameters.

externC void cyg_drv_interrupt_configure(
                     cyg_vector_t        vector,
                     cyg_bool_t          level,
                     cyg_bool_t          up
                     )
{
    CYG_REPORT_FUNCTION();
    CYG_REPORT_FUNCARG3("vector = %d, level = %d, up = %d", vector, level,
                        up);

    CYG_ASSERT( vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

    HAL_INTERRUPT_CONFIGURE( vector, level, up );

    CYG_REPORT_RETURN();
}

//--------------------------------------------------------------------------
// Configure interrupt priority level.

externC void cyg_drv_interrupt_level( cyg_vector_t vector, cyg_priority_t level )
{
    CYG_REPORT_FUNCTION();
    CYG_REPORT_FUNCARG2("vector = %d, level = %d", vector, level);

    CYG_ASSERT( vector >= CYGNUM_HAL_ISR_MIN, "Invalid vector");    
    CYG_ASSERT( vector <= CYGNUM_HAL_ISR_MAX, "Invalid vector");

    HAL_INTERRUPT_SET_LEVEL( vector, level );

    CYG_REPORT_RETURN();
}


// -------------------------------------------------------------------------
// Exception delivery function called from the HAL as a result of a
// hardware exception being raised.

externC void cyg_hal_deliver_exception( CYG_WORD code, CYG_ADDRWORD data )
{
    CYG_FAIL(" !!! Exception !!! ");
}


#endif

//--------------------------------------------------------------------------
// EOF drv_api.c