##=============================================================================
##
##      context.S
##
##      i386 context switch code
##
##=============================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   jskov
## Contributors:jskov
## Date:        1999-01-20
## Purpose:     i386 context switch code
## Description: This file contains implementations of the thread context 
##              switch routines. It also contains the longjmp() and setjmp()
##              routines.
##              Based on PowerPC context.S, using data from SYSV ABI4, i386 
##              supplement (page 37-38)
##         http://www.sco.com/products/layered/develop/devspecs/abi386-4.pdf
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/hal.h>

#include "cyg/hal/i386.inc"

#------------------------------------------------------------------------------
# function declaration macro

#define FUNC_START(name)                        \
        .globl name;                            \
name:   

#------------------------------------------------------------------------------
# hal_thread_switch_context
# Switch thread contexts
# :     0(%esp) :     return address
# :     4(%esp) :     address of sp of next thread to execute
# :     8(%esp) :     address of sp save location of current thread
#
# %eax, %ecx, and %edx are ours to abuse.
        
FUNC_START(hal_thread_switch_context)
        movl    4(%esp),%eax            # next context ptr
        movl    8(%esp),%edx            # this context ptr

        # Make room on the stack for the context
        movl    %esp,%ecx               # keep original SP
        sub     $i386reg_context_size,%esp

        # Save next context ptr in this context. Necessary because
        # hal_thread_load_context expects to find the ptr on the stack,
        # not in a register as on PPC.
        movl    %eax,i386reg_next_context(%esp)

        # Save registers
        movl    %ecx,i386reg_esp(%esp)  # original esp
        movl    %ebp,i386reg_ebp(%esp)
        movl    %ebx,i386reg_ebx(%esp)
        movl    %esi,i386reg_esi(%esp)
        movl    %edi,i386reg_edi(%esp)
        
        # Store the context ptr
        movl    %esp,(%edx)

        # Now fall through to hal_thread_load_context
        
        
#------------------------------------------------------------------------------
# hal_thread_load_context
# Load thread context
# : 4(%esp) = i386reg_next_context(%esp) = address of sp of thread to execute
# Note that this function is also the second half of hal_thread_switch_context
# and is simply dropped into from it.
#
# %eax, %ecx, and %edx are ours to abuse.
        
FUNC_START(hal_thread_load_context)
        movl    i386reg_next_context(%esp),%eax # get new context ptr
        movl    (%eax),%eax
        
        # Restore registers
        movl    i386reg_ebp(%eax),%ebp
        movl    i386reg_ebx(%eax),%ebx
        movl    i386reg_esi(%eax),%esi
        movl    i386reg_edi(%eax),%edi
        movl    i386reg_esp(%eax),%esp

        ret


#------------------------------------------------------------------------------
# HAL longjmp, setjmp implementations
# hal_setjmp saves only to callee save registers ebp, ebx, esi, edi and
# and esp+pc into buffer supplied in 4(esp)
# Note: These definitions are repeated in hal_arch.h. If changes are required
# remember to update both sets.

#define CYGARC_JMP_BUF_SP        0
#define CYGARC_JMP_BUF_EBP       1
#define CYGARC_JMP_BUF_EBX       2
#define CYGARC_JMP_BUF_ESI       3
#define CYGARC_JMP_BUF_EDI       4
#define CYGARC_JMP_BUF_PC        5

#define CYGARC_JMP_BUF_SIZE      6

FUNC_START(hal_setjmp)
        # Get jmpbuf pointer
        movl    4(%esp),%eax

        # Save regular registers
        movl    %ebp,CYGARC_JMP_BUF_EBP*4(%eax)
        movl    %ebx,CYGARC_JMP_BUF_EBX*4(%eax)
        movl    %esi,CYGARC_JMP_BUF_ESI*4(%eax)
        movl    %edi,CYGARC_JMP_BUF_EDI*4(%eax)

        # Stack and PC
        movl    %esp,CYGARC_JMP_BUF_SP*4(%eax)
        movl    0(%esp),%ebx
        movl    %ebx,CYGARC_JMP_BUF_PC*4(%eax)

        # Return 0
        xor     %eax,%eax
        ret

        
# hal_longjmp loads state from 4(esp) and returns to PC stored in state

FUNC_START(hal_longjmp)
        # Get return value
        movl    8(%esp),%eax

        # Get jmpbuf pointer
        movl    4(%esp),%ecx
        
        # Restore regular registers
        movl    CYGARC_JMP_BUF_EBP*4(%ecx),%ebp
        movl    CYGARC_JMP_BUF_EBX*4(%ecx),%ebx
        movl    CYGARC_JMP_BUF_ESI*4(%ecx),%esi
        movl    CYGARC_JMP_BUF_EDI*4(%ecx),%edi
        
        # Restore stack pointer
        movl    CYGARC_JMP_BUF_SP*4(%ecx),%esp

        # Put return address on stack        
        movl    CYGARC_JMP_BUF_PC*4(%ecx),%edx
        movl    %edx,0(%esp)

        ret

#-----------------------------------------------------------------------------
# End of context.S