# HG changeset patch # User bartv # Date 1029102050 0 # Node ID f58bc1b2c2bc4062063bcb5799591badfca4cd62 # Parent a29ee6c2dd3c41dc510f7cfe1412b54fc99dc09b Reorganization of the host-side autoconfiscation support, and a couple of minor bug fixes. The main goal is to support per-package host-side software in addition to the generic host-side tools. For example, the synthetic target HAL and device driver packages can now have host subdirectories with support code. diff --git a/ChangeLog b/ChangeLog --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2002-08-03 Bart Veer + + * acinclude.m4, configure.in, Makefile.am: + Rework host-side autoconf support + 1999-11-10 Bart Veer * configure.in diff --git a/Makefile.am b/Makefile.am --- a/Makefile.am +++ b/Makefile.am @@ -6,38 +6,28 @@ ## eCos host-side software toplevel makefile ## ## ===================================================================== -#####ECOSGPLCOPYRIGHTBEGIN#### -# ------------------------------------------- -# This file is part of eCos, the Embedded Configurable Operating System. -# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +## ------------------------------------------- +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # -# eCos is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 or (at your option) any later version. -# -# eCos is distributed in the hope that it will be useful, but WITHOUT ANY -# WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. +# This file is part of the eCos host tools. # -# You should have received a copy of the GNU General Public License along -# with eCos; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -# -# As a special exception, if other files instantiate templates or use macros -# or inline functions from this file, or you compile this file and link it -# with other works to produce a work based on this file, this file does not -# by itself cause the resulting work to be covered by the GNU General Public -# License. However the source code for this file must still be made available -# in accordance with section (3) of the GNU General Public License. -# -# This exception does not invalidate any other reasons why a work based on -# this file might be covered by the GNU General Public License. -# -# Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. -# at http://sources.redhat.com/ecos/ecos-license -# ------------------------------------------- -#####ECOSGPLCOPYRIGHTEND#### +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +## ------------------------------------------- +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -49,5 +39,6 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus -SUBDIRS = host +AUTOMAKE_OPTIONS = 1.3 foreign +SUBDIRS = @SUBDIRS@ + diff --git a/Makefile.in b/Makefile.in --- a/Makefile.in +++ b/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,38 +10,26 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -#####ECOSGPLCOPYRIGHTBEGIN#### -# ------------------------------------------- -# This file is part of eCos, the Embedded Configurable Operating System. -# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # -# eCos is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 or (at your option) any later version. -# -# eCos is distributed in the hope that it will be useful, but WITHOUT ANY -# WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. +# This file is part of the eCos host tools. # -# You should have received a copy of the GNU General Public License along -# with eCos; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -# -# As a special exception, if other files instantiate templates or use macros -# or inline functions from this file, or you compile this file and link it -# with other works to produce a work based on this file, this file does not -# by itself cause the resulting work to be covered by the GNU General Public -# License. However the source code for this file must still be made available -# in accordance with section (3) of the GNU General Public License. -# -# This exception does not invalidate any other reasons why a work based on -# this file might be covered by the GNU General Public License. -# -# Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. -# at http://sources.redhat.com/ecos/ecos-license -# ------------------------------------------- -#####ECOSGPLCOPYRIGHTEND#### +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -96,36 +84,49 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ -EXEEXT = @EXEEXT@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ -OBJEXT = @OBJEXT@ +MSVC_SRCDIR = @MSVC_SRCDIR@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ VERSION = @VERSION@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus -SUBDIRS = host +AUTOMAKE_OPTIONS = 1.3 foreign +SUBDIRS = @SUBDIRS@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/host/mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/acsupport/mkinstalldirs CONFIG_CLEAN_FILES = -DIST_COMMON = ChangeLog Makefile.am Makefile.in aclocal.m4 configure \ -configure.in +DIST_COMMON = COPYING ChangeLog Makefile.am Makefile.in acinclude.m4 \ +aclocal.m4 configure configure.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -TAR = tar +TAR = gtar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4 cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -143,7 +144,7 @@ config.status: $(srcdir)/configure $(CON @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ @@ -169,7 +170,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ @@ -260,10 +261,15 @@ distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ - cp -pr $$/$$file $(distdir)/$$file; \ + cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ @@ -284,12 +290,10 @@ info-am: info: info-recursive dvi-am: dvi: dvi-recursive -check-am: +check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive -install-info-am: -install-info: install-info-recursive install-exec-am: install-exec: install-exec-recursive @@ -346,12 +350,11 @@ installcheck-recursive info-recursive dv mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info install-exec-am install-exec install-data-am install-data \ -install-am install uninstall-am uninstall all-redirect all-am all \ -installdirs-am installdirs mostlyclean-generic distclean-generic \ -clean-generic maintainer-clean-generic clean mostlyclean distclean \ -maintainer-clean +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/acinclude.m4 b/acinclude.m4 new file mode 100644 --- /dev/null +++ b/acinclude.m4 @@ -0,0 +1,44 @@ +dnl Process this file with aclocal to get an aclocal.m4 file. Then +dnl process that with autoconf. +dnl ==================================================================== +dnl +dnl acinclude.m4 +dnl +dnl ==================================================================== +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### +dnl ---------------------------------------------------------------------------- +dnl Copyright (C) 2002 Bart Veer +dnl +dnl This file is part of the eCos host tools. +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) +dnl any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl more details. +dnl +dnl You should have received a copy of the GNU General Public License along with +dnl this program; if not, write to the Free Software Foundation, Inc., +dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +dnl +dnl ---------------------------------------------------------------------------- +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### +dnl ==================================================================== +dnl#####DESCRIPTIONBEGIN#### +dnl +dnl Author(s): bartv +dnl Contact(s): bartv +dnl Date: 2002/08/03 +dnl Version: 0.01 +dnl +dnl####DESCRIPTIONEND#### +dnl ==================================================================== + +dnl Access shared macros. +dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not +dnl incorporate the macro into aclocal.m4 +sinclude(acsupport/acinclude.m4) diff --git a/aclocal.m4 b/aclocal.m4 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -10,6 +10,64 @@ dnl but WITHOUT ANY WARRANTY, to the ext dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. +dnl Process this file with aclocal to get an aclocal.m4 file. Then +dnl process that with autoconf. +dnl ==================================================================== +dnl +dnl acinclude.m4 +dnl +dnl ==================================================================== +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### +dnl ---------------------------------------------------------------------------- +dnl Copyright (C) 2002 Bart Veer +dnl +dnl This file is part of the eCos host tools. +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) +dnl any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl more details. +dnl +dnl You should have received a copy of the GNU General Public License along with +dnl this program; if not, write to the Free Software Foundation, Inc., +dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +dnl +dnl ---------------------------------------------------------------------------- +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### +dnl ==================================================================== +dnl#####DESCRIPTIONBEGIN#### +dnl +dnl Author(s): bartv +dnl Contact(s): bartv +dnl Date: 2002/08/03 +dnl Version: 0.01 +dnl +dnl####DESCRIPTIONEND#### +dnl ==================================================================== + +dnl Access shared macros. +dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not +dnl incorporate the macro into aclocal.m4 +sinclude(acsupport/acinclude.m4) + +# Define a conditional. + +AC_DEFUN([AM_CONDITIONAL], +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. @@ -19,7 +77,7 @@ dnl PARTICULAR PURPOSE. dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -47,7 +105,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -88,7 +146,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -107,7 +165,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, @@ -122,16 +180,3 @@ AC_DEFUN(AM_MAINTAINER_MODE, ] ) -# Define a conditional. - -AC_DEFUN(AM_CONDITIONAL, -[AC_SUBST($1_TRUE) -AC_SUBST($1_FALSE) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi]) - diff --git a/acsupport/ChangeLog b/acsupport/ChangeLog new file mode 100644 --- /dev/null +++ b/acsupport/ChangeLog @@ -0,0 +1,28 @@ +2002-08-03 Bart Veer + + * Created as part of autoconf reorganization. + +//####COPYRIGHTBEGIN#### +// +// ---------------------------------------------------------------------------- +// Copyright (C) 2002 Bart Veer +// +// This file is part of the eCos autoconf support. +// +// This program is free software; you can redistribute it and/or modify it +// under the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 of the License, or (at your option) +// any later version. +// +// This program is distributed in the hope that it will be useful, but WITHOUT +// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +// more details. +// +// You should have received a copy of the GNU General Public License along with +// this program; if not, write to the Free Software Foundation, Inc., +// 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +// +// ---------------------------------------------------------------------------- +// +//####COPYRIGHTEND#### diff --git a/acsupport/acinclude.m4 b/acsupport/acinclude.m4 new file mode 100644 --- /dev/null +++ b/acsupport/acinclude.m4 @@ -0,0 +1,824 @@ +dnl Process this file with aclocal to get an aclocal.m4 file. Then +dnl process that with autoconf. +dnl ==================================================================== +dnl +dnl acinclude.m4 +dnl +dnl Various autoconf macros that are shared between different +dnl eCos packages. +dnl +dnl ==================================================================== +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### +dnl ---------------------------------------------------------------------------- +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +dnl +dnl This file is part of the eCos host tools. +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) +dnl any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl more details. +dnl +dnl You should have received a copy of the GNU General Public License along with +dnl this program; if not, write to the Free Software Foundation, Inc., +dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +dnl +dnl ---------------------------------------------------------------------------- +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### +dnl ==================================================================== +dnl#####DESCRIPTIONBEGIN#### +dnl +dnl Author(s): bartv +dnl Contact(s): bartv +dnl Date: 1998/12/16 +dnl Version: 0.01 +dnl +dnl####DESCRIPTIONEND#### +dnl ==================================================================== + +dnl ==================================================================== +dnl Ensure that configure is not being run in the source tree, i.e. +dnl that a separate build tree has been created. This is not absolutely +dnl necessary at the time of writing but may become so in future, and +dnl is good practice. + +AC_DEFUN(ECOS_CHECK_BUILD_ne_SRC,[ + AC_MSG_CHECKING([that a separate build tree is being used]) + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} + fi + if test "${ecos_cwd}" = "${srcdir}" ; then + AC_MSG_RESULT([no]) + AC_MSG_ERROR([This configure script should not be run inside the source tree. Instead please use a separate build tree]) + else + AC_MSG_RESULT(yes) + fi +]) + +dnl ==================================================================== +dnl The AM_INIT_AUTOMAKE() will define a symbol VERSION for the +dnl package's version number. Unfortunately this symbol is rather +dnl hard to share if several different packages are involved, so this +dnl macro is used to define an alternative symbol + +AC_DEFUN(ECOS_SUBST_VERSION,[ + AC_REQUIRE([AM_INIT_AUTOMAKE]) + ifelse($#,1,,AC_MSG_ERROR([Invalid number of arguments passed to ECOS SUBST_VERSION])) + AC_DEFINE_UNQUOTED($1, "$VERSION") +]) + +dnl -------------------------------------------------------------------- +dnl Convert a cygwin pathname to something acceptable to VC++ (but +dnl still invoked from bash and cygwin's make). This means using +dnl the cygpath utility and then translating any backslashes into +dnl forward slashes to avoid confusing make. + +AC_DEFUN(ECOS_MSVC_PATH, [ + AC_REQUIRE([ECOS_PROG_MSVC]) + ifelse($#, 1, , AC_MSG_ERROR("Invalid number of arguments passed to ECOS MSVC_PATH")) + if test "${MSVC}" = "yes" ; then + $1=`cygpath -w ${$1} | tr \\\\\\\\ /` + fi +]) + +dnl ==================================================================== +dnl An internal utility to define eCos variants of various compilation +dnl related flags. The aim is to avoid messing with CFLAGS, LIBS, and +dnl so on because those are used for feature tests as well as for +dnl passing on to the application. +AC_DEFUN(ECOS_PROG_DEFINE_COMPILER_FLAGS,[ + ecos_CFLAGS="" + ecos_CXXFLAGS="" + ecos_LDADD="" + ecos_INCLUDES="" + ecos_LIBS="" + AC_SUBST(ecos_CFLAGS) + AC_SUBST(ecos_CXXFLAGS) + AC_SUBST(ecos_LDADD) + AC_SUBST(ecos_INCLUDES) + AC_SUBST(ecos_LIBS) +]) + +dnl For historical reasons some of the eCos host-side software can be +dnl built with Visual C++ as well as g++. The user can specify this +dnl at configure time using CC=cl, where cl.exe is the compiler driver. +dnl This macro will set the variable MSVC to "yes" or to "no" depending +dnl on whether or not VC++ is being used, analogous to the variable +dnl GCC set by AC_PROG_CC. It provides support for an automake +dnl conditional thus allowing the makefile to adapt somewhat to the +dnl compiler being used. Finally it fills in the ECOS_INCLUDES, +dnl ECOS_LIBS and ECOS_LDADD variables with suitable initial values. + +AC_DEFUN(ECOS_PROG_MSVC,[ + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_PROG_CXX]) + AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS]) + + AC_MSG_CHECKING("for Visual C++") + MSVC="no"; + if test "${CC}" = "cl" ; then + MSVC="yes" + CXX="cl" + ECOS_MSVC_PATH(MSVC_SRCDIR) + AC_SUBST(MSVC_SRCDIR) + ecos_INCLUDES="${ecos_INCLUDES} \"-I${msvc_srcdir}\"" + ecos_LDADD="-link" + ecos_LIBS="advapi32.lib" + fi + AM_CONDITIONAL(MSVC, test "${MSVC}" = "yes") + if test "${MSVC}" = "yes" ; then + AC_MSG_RESULT([unfortunately yes]) + else + AC_MSG_RESULT([no]) + fi +]) + +dnl ==================================================================== +dnl Set up sensible flags for the various different compilers. This +dnl is achieved by manipulating AM-CFLAGS and AM-CXXFLAGS via a subst, +dnl plus undoing the setting of CFLAGS and CXXFLAGS done by +dnl the AC_PROC_CC and AC_PROG_CXX macros (e.g. setting the default +dnl compilation flags to -O2). Note that this relies +dnl on knowing about the internals of those macros. +dnl +dnl There is little point in checking the cache: this macro does +dnl not do any feature tests so checking the cache would probably +dnl be more expensive than doing the work here. +dnl +dnl For now the only supported compilers are gcc/g++ and VC++. Attempts +dnl to use another compiler will result in an error at configure-time. +AC_DEFUN(ECOS_PROG_STANDARD_COMPILER_FLAGS, [ + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_PROG_CXX]) + AC_REQUIRE([ECOS_PROG_DEFINE_COMPILER_FLAGS]) + AC_REQUIRE([ECOS_PROG_MSVC]) + + AC_MSG_CHECKING("the default compiler flags") + + dnl Add a user-settable flag to control whether or debugging info is + dnl incorporated at compile-time. + ecosflags_enable_debug="no" + AC_ARG_ENABLE(debug,[ --enable-debug do a debug rather than a release build], + [case "${enableval}" in + yes) ecosflags_enable_debug="yes" ;; + *) ecosflags_enable_debug="no" ;; + esac]) + + dnl For VC++ builds also provide a flag for ANSI vs. unicode builds. + dnl For now this does not actually affect the compiler flags. + dnl NOTE: there may also have to be a flag to control whether or + dnl the VC++ multi-threading flags are enabled. + ecosflags_enable_ansi="no" + if test "${MSVC}" = "yes" ; then + AC_ARG_ENABLE(ansi,[ --enable-ansi do an ANSI rather than a unicode build], + [case "${enableval}" in + yes) ecosflags_enable_ansi="yes" ;; + *) ecosflags_enable_ansi="no" ;; + esac]) + fi + + dnl Now we know what the user is after. + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" + elif test "${MSVC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" + else + AC_MSG_ERROR("default flags for ${CC} are not known") + fi + + dnl Choose between debugging and optimization. + if test "${ecosflags_enable_debug}" = "yes" ; then + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -g -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" + elif test "${MSVC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" + fi + else + dnl For now building with g++ implies -O0 rather than -O2. The + dnl compile-time performance of g++ at -O2 has been disappointing + dnl for quite some time, and the eCos host-side code is not + dnl sufficiently cpu-intensive to require -O2. + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" + elif test "${MSVC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" + fi + fi + + CFLAGS="${ac_save_CFLAGS}" + CXXFLAGS="${ac_save_CXXFLAGS}" + + AC_MSG_RESULT(done) +]) + +dnl -------------------------------------------------------------------- +dnl User-settable options for assertions and tracing. +dnl +dnl The settable options are: +dnl --disable-asserts +dnl --disable-preconditions +dnl --disable-postconditions +dnl --disable-invariants +dnl --disable-loopinvariants +dnl --disable-tracing +dnl --disable-fntracing + +AC_DEFUN(ECOS_ARG_INFRASTRUCTURE, [ + + AC_REQUIRE([ECOS_PROG_STANDARD_COMPILER_FLAGS]) + + if test "${ecosflags_enable_debug}" = "yes" ; then + ecosinfra_asserts="yes" + ecosinfra_preconditions="yes" + ecosinfra_postconditions="yes" + ecosinfra_invariants="yes" + ecosinfra_loopinvariants="yes" + ecosinfra_tracing="yes" + ecosinfra_fntracing="yes" + else + ecosinfra_asserts="no" + ecosinfra_preconditions="no" + ecosinfra_postconditions="no" + ecosinfra_invariants="no" + ecosinfra_loopinvariants="no" + ecosinfra_tracing="no" + ecosinfra_fntracing="no" + fi + + AC_ARG_ENABLE(asserts,[ --disable-asserts disable all assertions], + [case "${enableval}" in + yes) ecosinfra_asserts="yes" ;; + no) ecosinfra_asserts="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-asserts option]) ;; + esac]) + if test "${ecosinfra_asserts}" = "yes"; then + AC_DEFINE(CYGDBG_USE_ASSERTS) + fi + + AC_ARG_ENABLE(preconditions, [ --disable-preconditions disable a subset of the assertions], + [case "${enableval}" in + yes) ecosinfra_preconditions="yes" ;; + no) ecosinfra_preconditions="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-preconditions option]) ;; + esac]) + if test "${ecosinfra_preconditions}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_PRECONDITIONS) + fi + + AC_ARG_ENABLE(postconditions, [ --disable-postconditions disable a subset of the assertions], + [case "${enableval}" in + yes) ecosinfra_postconditions="yes" ;; + no) ecosinfra_postconditions="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-postconditions option]) ;; + esac]) + if test "${ecosinfra_postconditions}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_POSTCONDITIONS) + fi + + AC_ARG_ENABLE(invariants, [ --disable-invariants disable a subset of the assertions], + [case "${enableval}" in + yes) ecosinfra_invariants="yes" ;; + no) ecosinfra_invariants="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-invariants option]) ;; + esac]) + if test "${ecosinfra_invariants}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_INVARIANTS) + fi + + AC_ARG_ENABLE(loopinvariants, [ --disable-loopinvariants disable a subset of the assertions], + [case "${enableval}" in + yes) ecosinfra_loopinvariants="yes" ;; + no) ecosinfra_loopinvariants="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-loopinvariants option]) ;; + esac]) + if test "${ecosinfra_loopinvariants}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS) + fi + + AC_ARG_ENABLE(tracing,[ --disable-tracing disable tracing], + [case "${enableval}" in + yes) ecosinfra_tracing="yes" ;; + no) ecosinfra_tracing="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-tracing option]) ;; + esac]) + if test "${ecosinfra_tracing}" = "yes"; then + AC_DEFINE(CYGDBG_USE_TRACING) + fi + + AC_ARG_ENABLE(fntracing,[ --disable-fntracing disable function entry/exit tracing], + [case "${enableval}" in + yes) ecosinfra_fntracing="yes" ;; + no) ecosinfra_fntracing=no ;; + *) AC_MSG_ERROR([bad value ${enableval} for disable-fntracing option]) ;; + esac]) + if test "${ecosinfra_fntracing}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS) + fi +]) + +dnl ==================================================================== +dnl Inspired by KDE's autoconfig +dnl This macro takes three Arguments like this: +dnl AC_FIND_FILE(foo.h, $incdirs, incdir) +dnl the filename to look for, the list of paths to check and +dnl the variable with the result. + +AC_DEFUN(AC_FIND_FILE,[ + $3="" + for i in $2; do + if test -r "$i/$1"; then + $3=$i + break + fi + done +]) + +dnl ==================================================================== +dnl Variation of the above. +dnl This macro takes three Arguments like this: +dnl AC_FIND_DIR(infra, $incdirs, incdir) +dnl the directory name to look for, the list of paths to check and +dnl the variable with the result. + +AC_DEFUN(AC_FIND_DIR,[ + $3="" + for i in $2; do + if test -d "$i/$1"; then + $3=$i + break + fi + done +]) + +dnl ==================================================================== +dnl Work out details of the Tcl/tk installation that should be used. +dnl This adds two main command-line options, --with-tcl= to +dnl specify the Tcl install directory, and --with-tcl-version= +dnl to control which version of Tcl should be used. For finer-grained +dnl control there are additional options --with-tcl-header and +dnl --with-tcl-version. It is assumed that Tcl and Tk are installed +dnl in the same place. +dnl +dnl On Unix systems and under cygwin there should be a file +dnl $(tcl_prefix)/lib/tclConfig.sh containing all the information +dnl needed for Tcl. This file is consulted and the appropriate +dnl variables extracted. Similar information for Tk lives in +dnl tkConfig.sh. As a useful side effect all variables defined +dnl in those scripts can be accessed. +dnl +dnl To confuse matters, subtly different naming conventions are used +dnl under Unix and NT. Under Unix the Tcl library will be called +dnl libtcl8.0.a, libtcl8.1.a, etc. with a dot between the major and +dnl minor version. Under NT (including cygwin) the library will be +dnl called tcl80.lib, tcl81.lib, libtcl80.a, libtcl81.a, etc. +dnl without a dot. +dnl +dnl Currently this macro assumes that Tcl is preinstalled, and not +dnl built alongside eCos. Specifically the macro checks that +dnl tcl.h can be found, plus on Unix systems tclConfig.sh and +dnl tkConfig.sh as well. +dnl +dnl This macro updates the build-related variables ecos_INCLUDES, +dnl ecos_LDADD, and ecos_LIBS. The latter assumes the application +dnl only needs Tcl. If Tk is needed as well then the variable +dnl ecos_tklibs should be used in addition. + +AC_DEFUN(ECOS_PATH_TCL, [ + + AC_REQUIRE([ECOS_PROG_MSVC]) + AC_REQUIRE([AC_CYGWIN]) + + ecos_tcl_version="" + ecos_tcl_incdir="" + ecos_tcl_libdir="" + ecos_tk_libs="" + + dnl Look for the version of Tcl. If none is specified, default to + dnl 8.0 under VC++ and cygwin, nothing under Unix. A version has to be + dnl specified under NT because there is no symbolic link from libtcl.a + dnl to whatever happens to be the most recent installed version. + + AC_MSG_CHECKING([for Tcl version]) + AC_ARG_WITH(tcl-version,[ --with-tcl-version= version of Tcl to be used],[ + ecos_tcl_version=${with_tcl_version} + ],[ + if test "${MSVC}" = "yes" ; then + ecos_tcl_version=80 + elif test "${ac_cv_cygwin}" = "yes" ; then + ecos_tcl_version=80 + else + ecos_tcl_version="" + fi + ]) + AC_MSG_RESULT([${ecos_tcl_version}]) + + dnl Where is the Tcl installation? + AC_MSG_CHECKING(for Tcl installation) + + AC_ARG_WITH(tcl-header,[ --with-tcl-header= location of Tcl header]) + AC_ARG_WITH(tcl-lib,[ --with-tcl-lib= location of Tcl libraries]) + AC_ARG_WITH(tcl,[ --with-tcl= location of Tcl header and libraries]) + + dnl If using VC++ then there are no sensible default directories + dnl to search for a Tcl installation. Instead the user must + dnl supply either --with-tcl, or both --with-tcl-header and + dnl --with-tcl-lib. + dnl + dnl Also when using VC++ there is no tclConfig.sh file to + dnl consult about which libraries are needed. Instead that + dnl information is hard-wired here. + + if test "${MSVC}" = "yes" ; then + + if test "${with_tcl_header+set}" = set ; then + ecos_tcl_incdir=${with_tcl_header} + elif test "${with_tcl+set}" = set ; then + ecos_tcl_incdir="${with_tcl}/include" + else + AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=) + fi + + dnl Sanity check, make sure that there is a tcl.h header file. + dnl If not then there is no point in proceeding. + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + AC_MSG_ERROR([unable to locate Tcl header file tcl.h]) + fi + ecos_msvc_tcl_incdir="${ecos_tcl_incdir}" + ECOS_MSVC_PATH(ecos_msvc_tcl_incdir) + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_tcl_incdir}\"" + + if test "${with_tcl_lib+set}" = set; then + ecos_tcl_libdir=${with_tcl_lib} + elif test "${with_tcl+set}" = set; then + ecos_tcl_libdir="${with_tcl}/lib" + else + AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=) + fi + ECOS_MSVC_PATH(ecos_tcl_libdir) + ecos_LIBS="${ecos_LIBS} tcl${ecos_tcl_version}.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_tcl_libdir}\"" + + dnl FIXME: what libraries are needed for a tk application under VC++? + dnl and can the version be determined more accurately? + ecos_tk_libs="" + + else + dnl Depending on the installation there are a number of reasonable locations for tcl.h + dnl so this code performs a search. + possibles="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl${ecos_tcl_version} /usr/include" + AC_FIND_FILE("tcl.h", ${possibles}, ecos_tcl_incdir) + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + AC_MSG_ERROR(unable to locate Tcl header file tcl.h) + else + dnl On Unix systems -I/usr/include is unnecessary, and can cause problems on hosts + dnl where gcc is not the platform's default compiler because of the use of + dnl unfixed headers. Hence it is explicitly removed here. Similarly + dnl -I/usr/lib serves no purpose, although it should be harmless. + dnl Under cygwin this check may be wrong, should the mount table + dnl be set up such that /usr/include points at the main cygwin + dnl headers. That assumes that gcc under cygwin does not have + dnl /usr/include in its default path, an untested assumption. + if test "${ecos_tcl_incdir}" != "/usr/include" ; then + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_tcl_incdir}" + fi + fi + possibles="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$${ecos_tcl_version} /usr/lib" + AC_FIND_FILE("tclConfig.sh", ${possibles}, ecos_tcl_libdir) + if test \! -r "${ecos_tcl_libdir}/tclConfig.sh" ; then + AC_MSG_ERROR(unable to locate Tcl config file tclConfig.sh) + else + . ${ecos_tcl_libdir}/tclConfig.sh + ecos_LIBS="${ecos_LIBS} -ltcl${ecos_tcl_version} ${TCL_LIBS}" + fi + + if test \! -r "${ecos_tcl_libdir}/tkConfig.sh" ; then + AC_MSG_ERROR(unable to locate Tk config file tkConfig.sh) + else + . ${ecos_tcl_libdir}/tkConfig.sh + ecos_tk_libs="-ltk${ecos_tcl_version} ${TK_LIBS}" + dnl Remove any library duplicates. It is not quite clear why, + dnl but they seem to cause problems. + for lib in ${TCL_LIBS} ; do + ecos_tk_libs=`echo ${ecos_tk_libs} | sed -e "s!${lib}!!"` + done + fi + fi + + AC_MSG_RESULT([-I${ecos_tcl_incdir} -L${ecos_tcl_libdir}]) + + AC_SUBST(ecos_tk_libs) +]) + +dnl ==================================================================== +dnl Search for the infrastructure headers. Usually these can be picked +dnl up from host/infra in the build tree. This macro updates +dnl ecos_INCLUDES, ecos_LDADD and ecos_LIBS appropriately. In addition +dnl it defines new variables ecos_infra_incdir and ecos_infra_libdir, +dnl useful for listing explicit dependencies. +dnl +dnl This macro should only be used in configure scripts that run after +dnl the infrastructure has been configured because it relies on the +dnl infra directory already having been created in the build tree. + +AC_DEFUN(ECOS_PATH_INFRA, [ + AC_MSG_CHECKING([for eCos host-side infrastructure]) + + dnl Where are we in the build tree? First assume that we are in the host + dnl tree, thus allowing configury of just the host-side. If that fails + dnl assume we can be anywhere. + infra_builddir="" + possibles=".. ../.. ../../.. ../../../.. ../../../../.." + AC_FIND_DIR("infra", ${possibles}, infra_builddir) + if test "${infra_builddir}" = "" ; then + possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" + AC_FIND_DIR("infra", ${possibles}, infra_builddir) + fi + if test "${infra_builddir}" != "" ; then + infra_builddir="${infra_builddir}/infra" + infra_builddir=`cd ${infra_builddir} && /bin/pwd` + fi + + ecos_infra_incdir="" + ecos_infra_libdir="" + ecos_infra_libs="" + + AC_ARG_WITH(infra-header,[ --with-infra-header= location of eCos infrastructure headers]) + AC_ARG_WITH(infra-lib,[ --with-infra-lib= location of eCos infrastructure library]) + AC_ARG_WITH(infra,[ --with-infra= location of eCos infrastructure installation]) + + if test "${with_infra_header+set}" = "set"; then + ecos_infra_incdir="${with_infra_header}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_incdir="${with_infra}/include" + elif test "${infra_builddir}" != "" ; then + ecos_infra_incdir="${infra_builddir}" + else + AC_MSG_ERROR([infrastructure headers not found]) + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_incdir = ${ecos_infra_incdir} + ECOS_MSVC_PATH(ecos_msvc_infra_incdir) + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_infra_incdir}\"" + else + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_infra_incdir}" + fi + + if test "${with_infra_lib+set}" = "set"; then + ecos_infra_libdir="${with_infra_lib}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_libdir="${with_infra}/lib" + elif test "${infra_builddir}" != "" ; then + ecos_infra_libdir="${infra_builddir}" + else + AC_MSG_ERROR([infrastructure library not found]) + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_libdir=${ecos_infra_libdir} + ECOS_MSVC_PATH(ecos_msvc_infra_libdir) + ecos_LIBS="${ecos_LIBS} cyginfra.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_infra_libdir}\"" + else + ecos_LIBS="${ecos_LIBS} -lcyginfra" + ecos_LDADD="${ecos_LDADD} -L${ecos_infra_libdir}" + fi + + AC_SUBST(ecos_infra_incdir) + AC_SUBST(ecos_infra_libdir) + AC_MSG_RESULT(-I[${ecos_infra_incdir} -L${ecos_infra_libdir}]) +]) + +dnl ==================================================================== +dnl And a very similar macro for libcdl, but note that the headers +dnl are in the source tree rather than the build tree. + +AC_DEFUN(ECOS_PATH_LIBCDL, [ + AC_MSG_CHECKING([for libcdl]) + + dnl Where are we in the source tree? + libcdl_srcdir="" + possibles="${srcdir}/.. ${srcdir}/../.. ${srcdir}/../../.. ${srcdir}/../../../.. ${srcdir}/../../../../.." + AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir) + if test "${libcdl_srcdir}" = "" ; then + possibles="${srcdir}/../host ${srcdir}/../../host ${srcdir}/../../../host ${srcdir}/../../../../host ${srcdir}/../../../../../host ${srcdir}/../../../../../../host" + AC_FIND_DIR("libcdl", ${possibles}, libcdl_srcdir) + fi + if test "${libcdl_srcdir}" != "" ; then + libcdl_srcdir="${libcdl_srcdir}/libcdl" + libcdl_srcdir=`cd ${libcdl_srcdir} && /bin/pwd` + fi + + dnl And where are we in the build tree? + libcdl_builddir="" + possibles=".. ../.. ../../.. ../../../.. ../../../../.." + AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir) + if test "${libcdl_builddir}" = "" ; then + possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" + AC_FIND_DIR("libcdl", ${possibles}, libcdl_builddir) + fi + if test "${libcdl_builddir}" != "" ; then + libcdl_builddir="${libcdl_builddir}/libcdl" + libcdl_builddir=`cd ${libcdl_builddir} && /bin/pwd` + fi + + ecos_libcdl_incdir="" + ecos_libcdl_libdir="" + ecos_libcdl_libs="" + + AC_ARG_WITH(libcdl-header,[ --with-libcdl-header= location of eCos libcdl headers]) + AC_ARG_WITH(libcdl-lib,[ --with-libcdl-lib= location of eCos libcdl library]) + AC_ARG_WITH(libcdl,[ --with-libcdl= location of eCos libcdl installation]) + + if test "${with_libcdl_header+set}" = "set"; then + ecos_libcdl_incdir="${with_libcdl_header}" + elif test "${with_libcdl+set}" = "set"; then + ecos_libcdl_incdir="${with_libcdl}/include" + elif test "${libcdl_srcdir}" != "" ; then + ecos_libcdl_incdir="${libcdl_srcdir}" + fi + if test \! -r "${ecos_libcdl_incdir}/cdl.hxx" ; then + AC_MSG_ERROR([libcdl headers not found]) + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_incdir = "${ecos_libcdl_incdir}" + ECOS_MSVC_PATH(ecos_msvc_libcdl_incdir) + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_libcdl_incdir}\"" + else + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_libcdl_incdir}" + fi + + if test "${with_libcdl_lib+set}" = "set"; then + ecos_libcdl_libdir="${with_libcdl_lib}" + elif test "${with_libcdl+set}" = "set"; then + ecos_libcdl_libdir="${with_libcdl}/lib" + elif test "${libcdl_builddir}" != "" ; then + ecos_libcdl_libdir="${libcdl_builddir}" + else + AC_MSG_ERROR([libcdl library not found]) + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_libdir=${ecos_libcdl_libdir} + ECOS_MSVC_PATH(ecos_msvc_libcdl_libdir) + ecos_LIBS="${ecos_LIBS} cdl.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_libcdl_libdir}\"" + else + ecos_LIBS="${ecos_LIBS} -lcdl" + ecos_LDADD="${ecos_LDADD} -L${ecos_libcdl_libdir}" + fi + + AC_SUBST(ecos_libcdl_incdir) + AC_SUBST(ecos_libcdl_libdir) + AC_MSG_RESULT([-I${ecos_libcdl_incdir} -L${ecos_libcdl_libdir}]) +]) + +dnl ==================================================================== +dnl Look for a 64 bit data type. It is necessary to check both C and C++ +dnl compilers. +dnl +dnl A better implementation would check whether or not AC_PROG_CC and +dnl AC_PROG_CXX have been invoked and only test the appropriate +dnl compiler. +dnl +dnl When cross-compiling, default to long long on the assumption that +dnl gcc/g++ must be used and long long is likely to be the 64 bit data +dnl type. This is not guaranteed, but sufficiently likely to meet +dnl the requirements for the time being. The CHECK_SIZEOF() macro +dnl might be another way to get the desired information. + +AC_DEFUN(ECOS_TYPE_64bit, [ + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_PROG_CXX]) + + AC_CACHE_CHECK("for a 64 bit data type",ecos_cv_type_64bit,[ + for type in "long" "long long" "__int64"; do + AC_LANG_SAVE + AC_LANG_C + AC_TRY_RUN([ + main() { + return 8 != sizeof($type); + } + ],ctype_64bit=$type,ctype_64bit="unknown",ctype_64bit="long long") + AC_LANG_CPLUSPLUS + AC_TRY_RUN([ + int main(int argc, char ** argv) { + return 8 != sizeof($type); + } + ],cxxtype_64bit=$type,cxxtype_64bit="unknown",cxxtype_64bit="long long") + AC_LANG_RESTORE + if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then + ecos_cv_type_64bit="${type}" + break + fi + done + ]) + if test "${ecos_cv_type_64bit}" = ""; then + AC_MSG_ERROR(Unable to figure out how to do 64 bit arithmetic) + else + if test "${ecos_cv_type_64bit}" != "long long"; then + AC_DEFINE_UNQUOTED(cyg_halint64,${ecos_cv_type_64bit}) + AC_DEFINE_UNQUOTED(cyg_halcount64,${ecos_cv_type_64bit}) + fi + fi +]) + +dnl ==================================================================== +dnl Check that both the C and C++ compilers support __PRETTY_FUNCTION__ + +AC_DEFUN(ECOS_C_PRETTY_FUNCTION,[ + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_PROG_CXX]) + + AC_CACHE_CHECK("for __PRETTY_FUNCTION__ support",ecos_cv_c_pretty_function,[ + AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK( + [#include ], + [puts(__PRETTY_FUNCTION__);], + c_ok="yes", + c_ok="no" + ) + AC_LANG_CPLUSPLUS + AC_TRY_LINK( + [#include ], + [puts(__PRETTY_FUNCTION__);], + cxx_ok="yes", + cxx_ok="no" + ) + AC_LANG_RESTORE + if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then + ecos_cv_c_pretty_function="yes" + fi + ]) + if test "${ecos_cv_c_pretty_function}" = "yes"; then + AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO) + fi +]) + +dnl ==================================================================== +dnl During installation eCos package-specific host-side code should be +dnl versioned in the same way as the packages themselves, allowing +dnl different versions to coexist in one installation. This is analogous +dnl to having multiple versions of a shared library installed so that +dnl applications can load whichever one they were linked with. +dnl +dnl To support all this the host-side code needs access to a number +dnl of directory names: +dnl ECOS_REPOSITORY e.g. ~/ecc/ecc +dnl PACKAGE_DIR e.g. hal/synth/arch +dnl PACKAGE_VERSION e.g. current +dnl PACKAGE_INSTALL e.g. hal/synth/arch/current +dnl +dnl These, together with the standard variable libexecdir, allow +dnl the host-side code to navigate around both source and install +dnl trees. + +AC_DEFUN(ECOS_PACKAGE_DIRS,[ + + dnl srcdir will be something like /packages///host + package_dir=`cd ${srcdir} && /bin/pwd` + PACKAGE_VERSION=`dirname ${package_dir}` + PACKAGE_VERSION=`basename ${PACKAGE_VERSION}` + + dnl Now look for an "acsupport" directory as a good way of identifying + dnl the root of the repository. Assume that this does not clash with + dnl any real packages in the repository. Also assume that no silly games + dnl are being played with symlinks. + package_dir=`dirname ${package_dir}` + package_dir=`dirname ${package_dir}` + + possibles="${package_dir}/.. ${package_dir}/../.. ${package_dir}/../../.. ${package_dir}/../../../.. ${package_dir}/../../../../../.." + AC_FIND_DIR("acsupport", ${possibles}, repository_root) + if test "${repository_root}" = "" ; then + AC_MSG_ERROR([Failed to identify this package's position within the eCos repository]) + fi + dnl repository_root will still contain the ..'s, instead of an absolute path + ECOS_REPOSITORY=`cd "${repository_root}/packages/pkgconf/.." && /bin/pwd` + + dnl Now we have two absolute paths, so just remove one from the other + PACKAGE_DIR=`echo ${package_dir} | sed -e "s:${ECOS_REPOSITORY}/::"` + + dnl To avoid creating too many subdirectories on the host-side, turn + dnl e.g. hal/synth/arch into hal_synth_arch. Theoretically this could + dnl go wrong because multiple packages could map onto the same string, + dnl but in practice there should be a net reduction in complexity. + dnl bartv: / to _ conversion disabled for now, 5 March 2002 + PACKAGE_INSTALL="${PACKAGE_DIR}/${PACKAGE_VERSION}" + dnl PACKAGE_INSTALL=`echo ${PACKAGE_INSTALL} | sed -e "s:/:_:g"` + + AC_SUBST(ECOS_REPOSITORY) + AC_SUBST(PACKAGE_DIR) + AC_SUBST(PACKAGE_VERSION) + AC_SUBST(PACKAGE_INSTALL) +]) diff --git a/acsupport/config.guess b/acsupport/config.guess new file mode 100644 --- /dev/null +++ b/acsupport/config.guess @@ -0,0 +1,1171 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 +# Free Software Foundation, Inc. +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Written by Per Bothner . +# Please send patches to . +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit system type (host/target name). +# +# Only a few systems have been added to this list; please add others +# (but try to keep the structure clean). +# + +# Use $HOST_CC if defined. $CC may point to a cross-compiler +if test x"$CC_FOR_BUILD" = x; then + if test x"$HOST_CC" != x; then + CC_FOR_BUILD="$HOST_CC" + else + if test x"$CC" != x; then + CC_FOR_BUILD="$CC" + else + CC_FOR_BUILD=cc + fi + fi +fi + + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 8/24/94.) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # Netbsd (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # Determine the machine/vendor (is the vendor relevant). + case "${UNAME_MACHINE}" in + amiga) machine=m68k-cbm ;; + arm32) machine=arm-unknown ;; + atari*) machine=m68k-atari ;; + sun3*) machine=m68k-sun ;; + mac68k) machine=m68k-apple ;; + macppc) machine=powerpc-apple ;; + hp3[0-9][05]) machine=m68k-hp ;; + ibmrt|romp-ibm) machine=romp-ibm ;; + *) machine=${UNAME_MACHINE}-unknown ;; + esac + # The Operating System including object format. + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main +main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + esac + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-cbm-sysv4 + exit 0;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + arc64:OpenBSD:*:*) + echo mips64el-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hkmips:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + atari*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + sun3*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i?86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:4) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=4.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + sed 's/^ //' << EOF >$dummy.c + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + rm -f $dummy.c $dummy + esac + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i?86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + hppa*:OpenBSD:*:*) + echo hppa-unknown-openbsd + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*X-MP:*:*:*) + echo xmp-cray-unicos + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY-2:*:*:*) + echo cray2-cray-unicos + exit 0 ;; + F300:UNIX_System_V:*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + F301:UNIX_System_V:*:*) + echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + i?86:BSD/386:*:* | i?86:BSD/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + if test -x /usr/bin/objformat; then + if test "elf" = "`/usr/bin/objformat`"; then + echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` + exit 0 + fi + fi + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + *:Linux:*:*) + + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_help_string=`cd /; ld --help 2>&1` + ld_supported_emulations=`echo $ld_help_string \ + | sed -ne '/supported emulations:/!d + s/[ ][ ]*/ /g + s/.*supported emulations: *// + s/ .*// + p'` + case "$ld_supported_emulations" in + *ia64) + echo "${UNAME_MACHINE}-unknown-linux" + exit 0 + ;; + i?86linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 + ;; + i?86coff) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 + ;; + sparclinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + armlinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + elf32arm*) + echo "${UNAME_MACHINE}-unknown-linux-gnuoldld" + exit 0 + ;; + armelf_linux*) + echo "${UNAME_MACHINE}-unknown-linux-gnu" + exit 0 + ;; + m68klinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + elf32ppc | elf32ppclinux) + # Determine Lib Version + cat >$dummy.c < +#if defined(__GLIBC__) +extern char __libc_version[]; +extern char __libc_release[]; +#endif +main(argc, argv) + int argc; + char *argv[]; +{ +#if defined(__GLIBC__) + printf("%s %s\n", __libc_version, __libc_release); +#else + printf("unkown\n"); +#endif + return 0; +} +EOF + LIBC="" + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null + if test "$?" = 0 ; then + ./$dummy | grep 1\.99 > /dev/null + if test "$?" = 0 ; then + LIBC="libc1" + fi + fi + rm -f $dummy.c $dummy + echo powerpc-unknown-linux-gnu${LIBC} + exit 0 + ;; + esac + + if test "${UNAME_MACHINE}" = "alpha" ; then + cat <$dummy.s + .data + \$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main + main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + LIBC="" + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + esac + + objdump --private-headers $dummy | \ + grep ld.so.1 > /dev/null + if test "$?" = 0 ; then + LIBC="libc1" + fi + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 + elif test "${UNAME_MACHINE}" = "mips" ; then + cat >$dummy.c < /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif +#ifdef __MIPSEB__ + printf ("%s-unknown-linux-gnu\n", argv[1]); +#endif +#ifdef __MIPSEL__ + printf ("%sel-unknown-linux-gnu\n", argv[1]); +#endif + return 0; +} +EOF + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + elif test "${UNAME_MACHINE}" = "s390"; then + echo s390-ibm-linux && exit 0 + else + # Either a pre-BFD a.out linker (linux-gnuoldld) + # or one that does not give us useful --help. + # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. + # If ld does not provide *any* "supported emulations:" + # that means it is gnuoldld. + echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" + test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 + + case "${UNAME_MACHINE}" in + i?86) + VENDOR=pc; + ;; + *) + VENDOR=unknown; + ;; + esac + # Determine whether the default compiler is a.out or elf + cat >$dummy.c < +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif +#ifdef __ELF__ +# ifdef __GLIBC__ +# if __GLIBC__ >= 2 + printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); +# else + printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +# endif +# else + printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +# endif +#else + printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); +#endif + return 0; +} +EOF + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + fi ;; +# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions +# are messed up and put the nodename in both sysname and nodename. + i?86:DYNIX/ptx:4*:*) + echo i386-sequent-sysv4 + exit 0 ;; + i?86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i?86:*:5:7*) + # Fixed at (any) Pentium or better + UNAME_MACHINE=i586 + if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then + echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} + fi + exit 0 ;; + i?86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i?86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:*:6*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + Power*:Mac*OS:*:*) + echo powerpc-apple-macos${UNAME_RELEASE} + exit 0 ;; + *:Mac*OS:*:*) + echo ${UNAME_MACHINE}-apple-macos${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-qnx-qnx${UNAME_VERSION} + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +#if !defined (ultrix) + printf ("vax-dec-bsd\n"); exit (0); +#else + printf ("vax-dec-ultrix\n"); exit (0); +#endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +#echo '(Unable to guess system type)' 1>&2 + +exit 1 diff --git a/acsupport/config.sub b/acsupport/config.sub new file mode 100644 --- /dev/null +++ b/acsupport/config.sub @@ -0,0 +1,1250 @@ +#! /bin/sh +# Configuration validation subroutine script, version 1.1. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 +# Free Software Foundation, Inc. +# +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Written by Per Bothner . +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +if [ x$1 = x ] +then + echo Configuration name missing. 1>&2 + echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 + echo "or $0 ALIAS" 1>&2 + echo where ALIAS is a recognized configuration type. 1>&2 + exit 1 +fi + +# First pass through any local machine types. +case $1 in + *local*) + echo $1 + exit 0 + ;; + *) + ;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + linux-gnu*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ + | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ + | 580 | i960 | h8300 \ + | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ + | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ + | alphaev6[78] \ + | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \ + | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \ + | mips64orion | mips64orionel | mipstx39 | mipstx39el \ + | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ + | mips64vr5000 | miprs64vr5000el | mcore \ + | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \ + | thumb | d10v | fr30 | avr) + basic_machine=$basic_machine-unknown + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i[34567]86) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + # FIXME: clean up the formatting here. + vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ + | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ + | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ + | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ + | xmp-* | ymp-* \ + | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ + | alphaev6[78]-* \ + | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ + | clipper-* | orion-* \ + | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ + | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \ + | mips64el-* | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ + | mipstx39-* | mipstx39el-* | mcore-* \ + | f301-* | armv*-* | s390-* | sv1-* | t3e-* \ + | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ + | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* ) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-cbm + ;; + amigaos | amigados) + basic_machine=m68k-cbm + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-cbm + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | ymp) + basic_machine=ymp-cray + os=-unicos + ;; + cray2) + basic_machine=cray2-cray + os=-unicos + ;; + [ctj]90-cray) + basic_machine=c90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i[34567]86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i[34567]86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i[34567]86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i[34567]86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + i386-go32 | go32) + basic_machine=i386-unknown + os=-go32 + ;; + i386-mingw32 | mingw32) + basic_machine=i386-unknown + os=-mingw32 + ;; + i386-qnx | qnx) + basic_machine=i386-qnx + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mipsel*-linux*) + basic_machine=mipsel-unknown + os=-linux-gnu + ;; + mips*-linux*) + basic_machine=mips-unknown + os=-linux-gnu + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + msdos) + basic_machine=i386-unknown + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + np1) + basic_machine=np1-gould + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexen) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexen-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=rs6000-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=t3e-cray + os=-unicos + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xmp) + basic_machine=xmp-cray + os=-unicos + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + mips) + if [ x$os = x-linux-gnu ]; then + basic_machine=mips-unknown + else + basic_machine=mips-mips + fi + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sparc | sparcv9) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -ns2 ) + os=-nextstep2 + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -qnx) + os=-qnx4 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -*MiNT) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f301-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -*MiNT) + vendor=atari + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os diff --git a/acsupport/install-sh b/acsupport/install-sh new file mode 100644 --- /dev/null +++ b/acsupport/install-sh @@ -0,0 +1,251 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 diff --git a/acsupport/ltconfig b/acsupport/ltconfig new file mode 100644 --- /dev/null +++ b/acsupport/ltconfig @@ -0,0 +1,2822 @@ +#! /bin/sh + +# ltconfig - Create a system-specific libtool. +# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A lot of this script is taken from autoconf-2.10. + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} +echo=echo +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec "$SHELL" "$0" --no-reexec ${1+"$@"} +fi + +# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != "Xset"; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) PATH_SEPARATOR=';' ;; + *) PATH_SEPARATOR=':' ;; + esac +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +if test "X${echo_test_string+set}" != "Xset"; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" != 'X\t' || + test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH /usr/ucb; do + if test -f $dir/echo && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running ltconfig again with it. + ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf "%s\n"' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + # Cool, printf works + : + elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && + test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && + test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# The name of this program. +progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` + +# Constants: +PROGRAM=ltconfig +PACKAGE=libtool +VERSION=1.2f +TIMESTAMP=" (1.385 1999/03/15 17:24:54)" +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5' +rm="rm -f" + +help="Try \`$progname --help' for more information." + +# Global variables: +default_ofile=libtool +can_build_shared=yes +enable_shared=yes +# All known linkers require a `.a' archive for static linking. +enable_static=yes +enable_fast_install=yes +enable_dlopen=unknown +ltmain= +silent= +srcdir= +ac_config_guess= +ac_config_sub= +host= +nonopt= +ofile="$default_ofile" +verify_host=yes +with_gcc=no +with_gnu_ld=no +need_locks=yes +ac_ext=c +objext=o +libext=a +cache_file= + +old_AR="$AR" +old_CC="$CC" +old_CFLAGS="$CFLAGS" +old_CPPFLAGS="$CPPFLAGS" +old_LD="$LD" +old_LN_S="$LN_S" +old_NM="$NM" +old_RANLIB="$RANLIB" +old_DLLTOOL="$DLLTOOL" +old_AS="$AS" + +# Parse the command line options. +args= +prev= +for option +do + case "$option" in + -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + eval "$prev=\$option" + prev= + continue + fi + + case "$option" in + --help) cat <&2 + echo "$help" 1>&2 + exit 1 + ;; + + *) + if test -z "$ltmain"; then + ltmain="$option" + elif test -z "$host"; then +# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 +# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then +# echo "$progname: warning \`$option' is not a valid host type" 1>&2 +# fi + host="$option" + else + echo "$progname: too many arguments" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac +done + +if test -z "$ltmain"; then + echo "$progname: you must specify a LTMAIN file" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +if test ! -f "$ltmain"; then + echo "$progname: \`$ltmain' does not exist" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +# Quote any args containing shell metacharacters. +ltconfig_args= +for arg +do + case "$arg" in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ltconfig_args="$ltconfig_args '$arg'" ;; + *) ltconfig_args="$ltconfig_args $arg" ;; + esac +done + +# A relevant subset of AC_INIT. + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 5 compiler messages saved in config.log +# 6 checking for... messages and results +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>>./config.log + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +if test -n "$cache_file" && test -r "$cache_file"; then + echo "loading cache $cache_file within ltconfig" + . $cache_file +fi + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + +if test -z "$srcdir"; then + # Assume the source directory is the same one as the path to LTMAIN. + srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` + test "$srcdir" = "$ltmain" && srcdir=. +fi + +trap "$rm conftest*; exit 1" 1 2 15 +if test "$verify_host" = yes; then + # Check for config.guess and config.sub. + ac_aux_dir= + for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/config.guess; then + ac_aux_dir=$ac_dir + break + fi + done + if test -z "$ac_aux_dir"; then + echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 + echo "$help" 1>&2 + exit 1 + fi + ac_config_guess=$ac_aux_dir/config.guess + ac_config_sub=$ac_aux_dir/config.sub + + # Make sure we can run config.sub. + if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : + else + echo "$progname: cannot run $ac_config_sub" 1>&2 + echo "$help" 1>&2 + exit 1 + fi + + echo $ac_n "checking host system type""... $ac_c" 1>&6 + + host_alias=$host + case "$host_alias" in + "") + if host_alias=`$SHELL $ac_config_guess`; then : + else + echo "$progname: cannot guess host type; you must specify one" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac + host=`$SHELL $ac_config_sub $host_alias` + echo "$ac_t$host" 1>&6 + + # Make sure the host verified. + test -z "$host" && exit 1 + +elif test -z "$host"; then + echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 + echo "$help" 1>&2 + exit 1 +else + host_alias=$host +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case "$host_os" in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +case "$host_os" in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR cru $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +# Set a sane default for `AR'. +test -z "$AR" && AR=ar + +# If RANLIB is not set, then run the test. +if test "${RANLIB+set}" != "set"; then + result=no + + echo $ac_n "checking for ranlib... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/ranlib; then + RANLIB="ranlib" + result="ranlib" + break + fi + done + IFS="$save_ifs" + + echo "$ac_t$result" 1>&6 +fi + +if test -n "$RANLIB"; then + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +fi + +# Set sane defaults for `DLLTOOL' and `AS', used on cygwin. +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$AS" && AS=as + +# Check to see if we are using GCC. +if test "$with_gcc" != yes || test -z "$CC"; then + # If CC is not set, then try to find GCC or a usable CC. + if test -z "$CC"; then + echo $ac_n "checking for gcc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH; do + IFS="$save_ifs" + test -z "$dir" && dir=. + if test -f $dir/gcc; then + CC="gcc" + break + fi + done + IFS="$save_ifs" + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + fi + + # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". + if test -z "$CC"; then + echo $ac_n "checking for cc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + cc_rejected=no + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/cc; then + if test "$dir/cc" = "/usr/ucb/cc"; then + cc_rejected=yes + continue + fi + CC="cc" + break + fi + done + IFS="$save_ifs" + if test $cc_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same name, so the bogon will be chosen + # first if we set CC to just the name; use the full file name. + shift + set dummy "$dir/cc" "$@" + shift + CC="$@" + fi + fi + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$CC"; then + echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 + exit 1 + fi + fi + + # Now see if the compiler is really GCC. + with_gcc=no + echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 + echo "$progname:564: checking whether we are using GNU C" >&5 + + $rm conftest.c + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + with_gcc=yes + fi + $rm conftest.c + echo "$ac_t$with_gcc" 1>&6 +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="$2" + +echo $ac_n "checking for object suffix... $ac_c" 1>&6 +$rm conftest* +echo 'int i = 1;' > conftest.c +echo "$progname:586: checking for object suffix" >& 5 +if { (eval echo $progname:587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + cat conftest.err 1>&5 + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 +fi +$rm conftest* +echo "$ac_t$objext" 1>&6 + +echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 +pic_flag= +special_shlib_compile_flags= +wl= +link_static_flag= +no_builtin_flag= + +if test "$with_gcc" = yes; then + wl='-Wl,' + link_static_flag='-static' + + case "$host_os" in + beos* | irix5* | irix6* | osf3* | osf4*) + # PIC is the default for these OSes. + ;; + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # we not sure about C++ programs. + link_static_flag="$link_static_flag ${wl}-lC" + ;; + cygwin* | mingw* | os2*) + # We can build DLLs from non-PIC. + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + pic_flag='-m68020 -resident32 -malways-restore-a4' + ;; + *) + pic_flag='-fPIC' + ;; + esac +else + # PORTME Check for PIC flags for the system compiler. + case "$host_os" in + aix3* | aix4*) + # All AIX code is PIC. + link_static_flag='-bnso -bI:/lib/syscalls.exp' + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better link_static_flag that works with the bundled CC? + wl='-Wl,' + link_static_flag="${wl}-a ${wl}archive" + pic_flag='+Z' + ;; + + irix5* | irix6*) + wl='-Wl,' + link_static_flag='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | os2*) + # We can build DLLs from non-PIC. + ;; + + osf3* | osf4*) + # All OSF/1 code is PIC. + wl='-Wl,' + link_static_flag='-non_shared' + ;; + + sco3.2v5*) + pic_flag='-Kpic' + link_static_flag='-dn' + special_shlib_compile_flags='-belf' + ;; + + solaris*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + sunos4*) + pic_flag='-PIC' + link_static_flag='-Bstatic' + wl='-Qoption ld ' + ;; + + sysv4.2uw2* | sysv4.3* | sysv5*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + uts4*) + pic_flag='-pic' + link_static_flag='-Bstatic' + ;; + + *) + can_build_shared=no + ;; + esac +fi + +if test -n "$pic_flag"; then + echo "$ac_t$pic_flag" 1>&6 + + # Check to make sure the pic_flag actually works. + echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $pic_flag -DPIC" + echo "$progname:717: checking if $compiler PIC flag $pic_flag works" >&5 + if { (eval echo $progname:718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + case "$host_os" in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then they + # create non-PIC objects. So, if there were any warnings, we assume that + # PIC is not supported. + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + can_build_shared=no + pic_flag= + else + echo "$ac_t"yes 1>&6 + pic_flag=" $pic_flag" + fi + ;; + *) + echo "$ac_t"yes 1>&6 + pic_flag=" $pic_flag" + ;; + esac + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + can_build_shared=no + pic_flag= + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* +else + echo "$ac_t"none 1>&6 +fi + +# Check to see if options -o and -c are simultaneously supported by compiler +echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6 +$rm conftest* +echo "int some_variable = 0;" > conftest.c +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -c -o conftest2.o" +echo "$progname:760: checking if $compiler supports -c -o file.o" >&5 +if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest2.o; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + compiler_c_o=no + else + echo "$ac_t"yes 1>&6 + compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat conftest.err 1>&5 + compiler_c_o=no + echo "$ac_t"no 1>&6 +fi +CFLAGS="$save_CFLAGS" +$rm conftest* + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + echo "$progname:788: checking if $compiler supports -c -o file.lo" >&5 +if { (eval echo $progname:789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + compiler_o_lo=no + else + echo "$ac_t"yes 1>&6 + compiler_o_lo=yes + fi + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + compiler_o_lo=no + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* +else + compiler_o_lo=no +fi + +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$ac_t$hard_links" 1>&6 + $rm conftest* + if test "$hard_links" = no; then + echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 + need_locks=warn + fi +else + need_locks=no +fi + +if test "$with_gcc" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c" + echo "$progname:840: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + if { (eval echo $progname:841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then + + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + compiler_rtti_exceptions=no + else + echo "$ac_t"yes 1>&6 + compiler_rtti_exceptions=yes + fi + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + compiler_rtti_exceptions=no + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi + +fi + +# Check for any special shared library compilation flags. +if test -n "$special_shlib_compile_flags"; then + echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : + else + echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 + can_build_shared=no + fi +fi + +echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 +$rm conftest* +echo 'main(){return(0);}' > conftest.c +save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $link_static_flag" +echo "$progname:884: checking if $compiler static flag $link_static_flag works" >&5 +if { (eval echo $progname:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + echo "$ac_t$link_static_flag" 1>&6 +else + echo "$ac_t"none 1>&6 + link_static_flag= +fi +LDFLAGS="$save_LDFLAGS" +$rm conftest* + +if test -z "$LN_S"; then + # Check to see if we can use ln -s, or we need hard links. + echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 + $rm conftestdata + if ln -s X conftestdata 2>/dev/null; then + $rm conftestdata + LN_S="ln -s" + else + LN_S=ln + fi + if test "$LN_S" = "ln -s"; then + echo "$ac_t"yes 1>&6 + else + echo "$ac_t"no 1>&6 + fi +fi + +# Make sure LD is an absolute path. +if test -z "$LD"; then + ac_prog=ld + if test "$with_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 + echo "$progname:917: checking for ld used by GCC" >&5 + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. + /* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we are not using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + elif test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld... $ac_c" 1>&6 + echo "$progname:941: checking for GNU ld" >&5 + else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 + echo "$progname:944: checking for non-GNU ld" >&5 + fi + + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog"; then + LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + fi + + if test -n "$LD"; then + echo "$ac_t$LD" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$LD"; then + echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 + exit 1 + fi +fi + +# Check to see if it really is or is not GNU ld. +echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 +# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + with_gnu_ld=yes +else + with_gnu_ld=no +fi +echo "$ac_t$with_gnu_ld" 1>&6 + +# See if the linker supports building shared libraries. +echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +always_export_symbols=no +export_symbols_cmds='$NM $libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms= + +case "$host_os" in +cygwin* | mingw*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$with_gcc" != yes; then + with_gnu_ld=no + fi + ;; + +freebsd2* | sunos4*) + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + ;; + +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case "$host_os" in + aix3* | aix4*) + # On AIX, the GNU linker is very broken + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' + wlarc= + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + export_symbols_cmds='rm -f $objdir/$soname-ltdll.c~ + sed -e "/^# \/\* ltdll.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ + (cd $objdir && $CC -c $soname-ltdll.c)~ + $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs~ + sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols' + + archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~ + _lt_hint=1; + for symbol in `cat $export_symbols`; do + echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def; + _lt_hint=`expr 1 + \$_lt_hint`; + done~ + $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ + $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ + $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts' + + old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case "$host_os" in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$with_gcc" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4*) + allow_undefined_flag= + if test "$with_gcc" = yes; then + if strings `${CC} -print-prog-name=collect2` | \ + grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + fi + archive_cmds='$CC -shared ${wl}-bnoentry -o $objdir/$soname $libobjs $deplibs $linkopts' + else + always_export_symbols=yes + archive_expsym_cmds='$CC -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bM:SRE ${wl}-bnoentry' + hardcode_direct=yes + fi + hardcode_minus_L=yes + # Though LIBPATH variable hardcodes shlibpath into executable, + # it doesn't affect searching for -l* libraries; this confuses + # tests in mdemo. + hardcode_shlibpath_var=unsupported + hardcode_libdir_flag_spec='-L$libdir' + ;; + + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + + cygwin* | mingw*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs' + fix_srcfile_path='`cygpath -w $srcfile`' + ;; + + freebsd1*) + ld_shlibs=no + can_build_shared=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_minus_L=no # verified on 2.2.6 + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + hpux9*) + archive_cmds='$rm $objdir/$soname~$LD -b +s +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10* | hpux11*) + archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$with_gcc" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF + fi + hardcode_libdir_flag_spec='${wl}-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + openbsd*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' + ;; + + osf3* | osf4*) + if test "$with_gcc" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts' + hardcode_direct=yes + ;; + + solaris*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + ;; + + sunos4*) + # Why do we need -Bstatic? To avoid inter-library dependencies, maybe... + if test "$with_gcc" = yes; then + # Use -fPIC here because libgcc is multilibbed + archive_cmds='$CC -shared ${wl}-Bstatic -fPIC -o $lib $libobjs $deplibs $linkopts' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + can_build_shared=no + ;; + esac +fi +echo "$ac_t$ld_shlibs" 1>&6 + +if test -z "$NM"; then + echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 + case "$NM" in + /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path. + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/nm; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -B" + break + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -p" + break + else + NM=${NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$NM" && NM=nm + ;; + esac + echo "$ac_t$NM" 1>&6 +fi + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + symcode='[BCDEGRST]' + ;; +solaris*) + symcode='[BDT]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + $rm conftest* + cat > conftest.c <&5 + if { (eval echo $progname:1448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then + # Now try to grab the symbols. + nlist=conftest.nm + if { echo "$progname:1451: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then + + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c' + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$objext conftestm.$objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftestm.$objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo $progname:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + pipe_works=yes + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + LIBS="$save_LIBS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + $rm conftest* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + global_symbol_pipe= + fi +done +echo "$ac_t$pipe_works" 1>&6 + +if test -z "$global_symbol_pipe"; then + global_symbol_to_cdecl= +fi + +# Check hardcoding attributes. +echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && \ + test "$hardcode_minus_L" != no && \ + test "$hardcode_shlibpath_var" != no; then + + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$ac_t$hardcode_action" 1>&6 + + +reload_flag= +reload_cmds='$LD$reload_flag -o $output$reload_objs' +echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 +# PORTME Some linkers may need a different reload flag. +reload_flag='-r' +echo "$ac_t$reload_flag" 1>&6 +test -n "$reload_flag" && reload_flag=" $reload_flag" + +# PORTME Fill in your ld.so characteristics +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +file_magic_cmd= +file_magic_test_file= +deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [regex]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. +echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 +case "$host_os" in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4*) + version_type=linux + # AIX has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + # We preserve .a as extension for shared libraries though AIX4.2 + # and later linker supports .so + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a' + shlibpath_var=LIBPATH + deplibs_check_method=pass_all + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + library_names_spec='${libname}.so$major ${libname}.so' + soname_spec='${libname}.so' + finish_cmds='PATH="$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + deplibs_check_method='file_magic ELF 32-bit LSB shared object' + file_magic_cmd=/usr/bin/file + file_magic_test_file=/shlib/libc.so + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw*) + version_type=windows + if test "$with_gcc" = yes; then + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' + else + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + fi + dynamic_linker='Win32 ld.exe' + deplibs_check_method='file_magic file format pei*-i386.*architecture: i386' + file_magic_cmd='objdump -f' + need_lib_prefix=no + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case "$version_type" in + freebsd-elf*) + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /usr/lib/libc.so*` + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + deplibs_check_method=unknown + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + finish_cmds='PATH="$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +gnu*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5*) + version_type=irix + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" # or should it be pass_all? + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /lib/libc.so*` + shlibpath_overrides_runpath=no + ;; + +irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + case "$LD" in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + # even though /usr/local/lib is always searched, the man-page says + # shared libraries should not be installed there if they use an ABI + # different from -32, so we'd better not search for shared libraries + # there either + sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" # or should it be pass_all? + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /lib${libsuff}/libc.so*` + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + + if test -f /lib/ld.so.1; then + dynamic_linker='GNU ld.so' + else + # Only the GNU ld.so supports shared libraries on MkLinux. + case "$host_cpu" in + powerpc*) dynamic_linker=no ;; + *) dynamic_linker='Linux ld.so' ;; + esac + fi + ;; + +netbsd*) + version_type=sunos + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + ;; + +openbsd*) + version_type=sunos + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + need_version=no + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4*) + version_type=osf + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + # deplibs_check_method='pass_all' + # Although pass_all appears to work, it copies symbols from static libraries + # into shared ones and exports them. So, when a program is linked with two + # or more libraries that have got copies of the same symbols, link fails + # This was only tested on osf4: + deplibs_check_method='file_magic COFF format alpha shared library' + file_magic_cmd=/usr/bin/file + file_magic_test_file=/shlib/libc.so + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib" + file_magic_cmd=/usr/bin/file + file_magic_test_file=/lib/libc.so + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case "$host_vendor" in + ncr) + deplibs_check_method='pass_all' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$ac_t$dynamic_linker" 1>&6 +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 + +if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then + case "$deplibs_check_method" in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac +fi + +echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + test "$enable_shared" = yes && enable_static=no + ;; +esac + +echo "$ac_t$enable_shared" 1>&6 + +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes + +echo "checking whether to build static libraries... $enable_static" 1>&6 + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +echo $ac_n "checking for objdir... $ac_c" 1>&6 +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +echo "$ac_t$objdir" 1>&6 + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else +if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then + lt_cv_dlopen=no lt_cv_dlopen_libs= +echo $ac_n "checking for dlopen""... $ac_c" 1>&6 +echo "$progname:1977: checking for dlopen" >&5 +if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +dlopen(); +#endif + +; return 0; } +EOF +if { (eval echo $progname:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_dlopen=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_dlopen=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +echo "$progname:2022: checking for dlopen in -ldl" >&5 +ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 +echo "$progname:2059: checking for dld_link in -ldld" >&5 +ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldld $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for shl_load""... $ac_c" 1>&6 +echo "$progname:2096: checking for shl_load" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +shl_load(); +#endif + +; return 0; } +EOF +if { (eval echo $progname:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shl_load=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shl_load=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="shl_load" +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for LoadLibrary""... $ac_c" 1>&6 +echo "$progname:2141: checking for LoadLibrary" >&5 +if eval "test \"`echo '$''{'ac_cv_func_LoadLibrary'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char LoadLibrary(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_LoadLibrary) || defined (__stub___LoadLibrary) +choke me +#else +LoadLibrary(); +#endif + +; return 0; } +EOF +if { (eval echo $progname:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_LoadLibrary=yes" +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_LoadLibrary=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'LoadLibrary`\" = yes"; then + echo "$ac_t""yes" 1>&6 + lt_cv_dlopen="LoadLibrary" +else + echo "$ac_t""no" 1>&6 +fi + + +fi + + +fi + + +fi + + +fi + +fi + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + fi + + case "$lt_cv_dlopen" in + dlopen) +for ac_hdr in dlfcn.h; do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "$progname:2210: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int fnord = 0; +EOF +ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo $progname:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +done + + if test "x$ac_cv_header_dlfcn_h" = xyes; then + CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + fi + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 +echo "$progname:2248: checking whether a program can dlopen itself" >&5 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + lt_cv_dlopen_self=cross + else + cat > conftest.c < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LTDL_GLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LTDL_GLOBAL DL_GLOBAL +# else +# define LTDL_GLOBAL 0 +# endif +#endif + +/* We may have to define LTDL_LAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LTDL_LAZY_OR_NOW +# ifdef RTLD_LAZY +# define LTDL_LAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LTDL_LAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LTDL_LAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LTDL_LAZY_OR_NOW DL_NOW +# else +# define LTDL_LAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +fnord() { int i=42;} +main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); + if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); + if(ptr1 || ptr2) exit(0); } exit(1); } + +EOF +if { (eval echo $progname:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + lt_cv_dlopen_self=yes +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + lt_cv_dlopen_self=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$lt_cv_dlopen_self" 1>&6 + + if test "$lt_cv_dlopen_self" = yes; then + LDFLAGS="$LDFLAGS $link_static_flag" + echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 +echo "$progname:2321: checking whether a statically linked program can dlopen itself" >&5 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + lt_cv_dlopen_self_static=cross + else + cat > conftest.c < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LTDL_GLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LTDL_GLOBAL DL_GLOBAL +# else +# define LTDL_GLOBAL 0 +# endif +#endif + +/* We may have to define LTDL_LAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LTDL_LAZY_OR_NOW +# ifdef RTLD_LAZY +# define LTDL_LAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LTDL_LAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LTDL_LAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LTDL_LAZY_OR_NOW DL_NOW +# else +# define LTDL_LAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +fnord() { int i=42;} +main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); + if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); + if(ptr1 || ptr2) exit(0); } exit(1); } + +EOF +if { (eval echo $progname:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + lt_cv_dlopen_self_static=yes +else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + lt_cv_dlopen_self_static=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 +fi + ;; + esac + + case "$lt_cv_dlopen_self" in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case "$lt_cv_dlopen_self_static" in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + +# Copy echo and quote the copy, instead of the original, because it is +# used later. +ltecho="$echo" +if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ltecho="$CONFIG_SHELL \$0 --fallback-echo" +fi +LTSHELL="$SHELL" + +LTCONFIG_VERSION="$VERSION" + +# Only quote variables if we're using ltmain.sh. +case "$ltmain" in +*.sh) + # Now quote all the things that may contain metacharacters. + for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ + old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \ + file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case "$var" in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case "$ltecho" in + *'\$0 --fallback-echo"') + ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + + trap "$rm \"$ofile\"; exit 1" 1 2 15 + echo "creating $ofile" + $rm "$ofile" + cat < "$ofile" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. +# +# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +### BEGIN LIBTOOL CONFIG +EOF + cfgfile="$ofile" + ;; + +*) + # Double-quote the variables that need it (for aesthetics). + for var in old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ + old_LN_S old_DLLTOOL old_AS; do + eval "$var=\\\"\$var\\\"" + done + + # Just create a config file. + cfgfile="$ofile.cfg" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + echo "creating $cfgfile" + $rm "$cfgfile" + cat < "$cfgfile" +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +EOF + ;; +esac + +cat <> "$cfgfile" +# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ +# LD=$old_LD NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\ +# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\ +# $0$ltconfig_args +# +# Compiler and other test output produced by $progname, useful for +# debugging $progname, is in ./config.log if it exists. + +# The version of $progname that generated this script. +LTCONFIG_VERSION=$LTCONFIG_VERSION + +# Shell to use when invoking shell scripts. +SHELL=$LTSHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$ltecho + +# The archiver. +AR=$AR + +# The default C compiler. +CC=$CC + +# The linker used to build libraries. +LD=$LD + +# Whether we need hard or soft links. +LN_S=$LN_S + +# A BSD-compatible nm program. +NM=$NM + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$reload_flag +reload_cmds=$reload_cmds + +# How to pass a linker flag through the compiler. +wl=$wl + +# Object file suffix (normally "o"). +objext="$objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Additional compiler flags for building library objects. +pic_flag=$pic_flag + +# Does compiler simultaneously support -c and -o options +compiler_c_o=$compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$RANLIB +old_archive_cmds=$old_archive_cmds +old_postinstall_cmds=$old_postinstall_cmds +old_postuninstall_cmds=$old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$old_archive_from_new_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$archive_cmds +archive_expsym_cmds=$archive_expsym_cmds +postinstall_cmds=$postinstall_cmds +postuninstall_cmds=$postuninstall_cmds + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$deplibs_check_method + +# Command to use when deplibs_check_method == file_magic +file_magic_cmd=$file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$global_symbol_to_cdecl + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required +always_export_symbols=$always_export_symbols + +# The command to extract exported symbols +export_symbols_cmds=$export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols +exclude_expsyms=$exclude_expsyms + +# Symbols that must always be exported +include_expsyms=$include_expsyms + +EOF + +case "$ltmain" in +*.sh) + echo '### END LIBTOOL CONFIG' >> "$ofile" + echo >> "$ofile" + case "$host_os" in + aix3*) + cat <<\EOF >> "$ofile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # Append the ltmain.sh script. + cat "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) + + chmod +x "$ofile" + ;; + +*) + # Compile the libtool program. + echo "FIXME: would compile $ltmain" + ;; +esac + +test -n "$cache_file" || exit 0 + +# AC_CACHE_SAVE +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/acsupport/ltmain.sh b/acsupport/ltmain.sh new file mode 100644 --- /dev/null +++ b/acsupport/ltmain.sh @@ -0,0 +1,3779 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# +# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +# The name of this program. +progname=`$echo "$0" | sed 's%^.*/%%'` +modename="$progname" + +# Constants. +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.2f +TIMESTAMP=" (1.385 1999/03/15 17:24:54)" + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' +SP2NL='tr \040 \012' +NL2SP='tr \012 \040' + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +# We save the old values to restore during execute mode. +if test "${LC_ALL+set}" = set; then + save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +fi +if test "${LANG+set}" = set; then + save_LANG="$LANG"; LANG=C; export LANG +fi + +if test "$LTCONFIG_VERSION" != "$VERSION"; then + echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + echo "$modename: not configured to build any kind of library" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" + +# Parse our command line options once, thoroughly. +while test $# -gt 0 +do + arg="$1" + shift + + case "$arg" in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + execute_dlfiles) + eval "$prev=\"\$$prev \$arg\"" + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case "$arg" in + --help) + show_help=yes + ;; + + --version) + echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + exit 0 + ;; + + --config) + sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + exit 0 + ;; + + --debug) + echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --quiet | --silent) + show=: + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 +fi + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + case "$nonopt" in + *cc | *++ | gcc* | *-gcc*) + mode=link + for arg + do + case "$arg" in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case "$mode" in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + lastarg= + srcfile="$nonopt" + suppress_output= + + user_target=no + for arg + do + # Accept any command-line options. + case "$arg" in + -o) + if test "$user_target" != "no"; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + user_target=next + ;; + + -static) + build_old_libs=yes + continue + ;; + esac + + case "$user_target" in + next) + # The next one is the -o target name + user_target=yes + continue + ;; + yes) + # We got the output file + user_target=set + libobj="$arg" + continue + ;; + esac + + # Accept the current argument as the source file. + lastarg="$srcfile" + srcfile="$arg" + + # Aesthetically quote the previous argument. + + # Backslashify any backslashes, double quotes, and dollar signs. + # These are the only characters that are still specially + # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly in scan + # sets, so we specify it separately. + case "$lastarg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + lastarg="\"$lastarg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + done + + case "$user_target" in + set) + ;; + no) + # Get the name of the library object. + libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + *) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSfmso]' + case "$libobj" in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case "$libobj" in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit 1 + ;; + esac + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $libobj" + else + removelist="$libobj" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit 1" 1 2 15 + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit 1" 1 2 15 + else + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until ln "$0" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $pic_flag -DPIC $srcfile" + if test "$build_old_libs" = yes; then + lo_libobj="$libobj" + dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$libobj"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + + if test -d "$dir"; then + $show "$rm $libobj" + $run $rm $libobj + else + $show "$mkdir $dir" + $run $mkdir $dir + status=$? + if test $status -ne 0 && test ! -d $dir; then + exit $status + fi + fi + fi + if test "$compiler_o_lo" = yes; then + output_obj="$libobj" + command="$command -o $output_obj" + elif test "$compiler_c_o" = yes; then + output_obj="$obj" + command="$command -o $output_obj" + fi + + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed, then go on to compile the next one + if test x"$output_obj" != x"$libobj"; then + $show "$mv $output_obj $libobj" + if $run $mv $output_obj $libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # If we have no pic_flag, then copy the object into place and finish. + if test -z "$pic_flag" && test "$build_old_libs" = yes; then + # Rename the .lo from within objdir to obj + if test -f $obj; then + $show $rm $obj + $run $rm $obj + fi + + $show "$mv $libobj $obj" + if $run $mv $libobj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + + # Now arrange that obj and lo_libobj become the same file + $show "$LN_S $obj $lo_libobj" + if $run $LN_S $obj $lo_libobj; then + exit 0 + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Allow error messages only from the first compilation. + suppress_output=' >/dev/null 2>&1' + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + command="$base_compile $srcfile" + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + output_obj="$obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then + echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed + if test x"$output_obj" != x"$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Create an invalid libtool object if no PIC, so that we do not + # accidentally link it into a program. + if test "$build_libtool_libs" != yes; then + $show "echo timestamp > $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + else + # Move the .lo from within objdir + $show "$mv $libobj $lo_libobj" + if $run $mv $libobj $lo_libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + fi + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $rm "$lockfile" + fi + + exit 0 + ;; + + # libtool link mode + link) + modename="$modename: link" + C_compiler="$CC" # save it, to compile generated C sources + CC="$nonopt" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invokation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (!dll) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i&2 + fi + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test $# -gt 0; do + arg="$1" + shift + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case "$prev" in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case "$arg" in + *.la | *.lo) ;; # We handle these cases below. + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + fi + prev= + continue + ;; + *) + dlprefiles="$dlprefiles $arg" + test "$prev" = dlfiles && dlfiles="$dlfiles $arg" + prev= + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit 1 + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath) + rpath="$rpath $arg" + prev= + continue + ;; + xrpath) + xrpath="$xrpath $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi + + prevarg="$arg" + + case "$arg" in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + dlopen_self=$dlopen_self_static + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + if test "$export_dynamic" != yes; then + export_dynamic=yes + if test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + else + arg= + fi + fi + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: cannot have more than one -exported-symbols" + exit 1 + fi + if test "$arg" = "-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'` + case "$dir" in + /* | [A-Za-z]:[/\\]*) + # Add the corresponding hardcode_libdir_flag, if it is not identical. + ;; + *) + $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2 + exit 1 + ;; + esac + case " $deplibs " in + *" $arg "*) ;; + *) deplibs="$deplibs $arg";; + esac + case " $lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir";; + esac + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + dllsearchdir=`cd "$dir" && pwd || echo "$dir"` + case ":$dllsearchpath:" in + ::) dllsearchpath="$dllsearchdir";; + *":$dllsearchdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dllsearchdir";; + esac + ;; + esac + ;; + + -l*) + deplibs="$deplibs $arg" + ;; + + -module) + if test "$module" != yes; then + module=yes + if test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + else + arg= + fi + fi + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + xrpath="$xrpath "`$echo "X$arg" | $Xsed -e 's/^-R//'` + continue + ;; + + -static) + # If we have no pic_flag, then this is the same as -all-static. + if test -z "$pic_flag" && test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + dlopen_self=$dlopen_self_static + fi + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + + *.o | *.obj | *.a | *.lib) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A library object. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + fi + libobjs="$libobjs $arg" + ;; + + *.la) + # A libtool-controlled library. + + dlname= + libdir= + library_names= + old_library= + + # Check to see that this really is a libtool archive. + if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 + exit 1 + fi + + # If the library was installed with an old release of libtool, + # it will not redefine variable installed. + installed=yes + + # If there is no directory component, then add one. + case "$arg" in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 + exit 1 + fi + + # Find the relevant object directory and library name. + name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` + + if test "X$installed" = Xyes; then + dir="$libdir" + else + dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$arg"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + fi + + if test -n "$dependency_libs"; then + # Extract -R from dependency_libs + temp_deplibs= + for deplib in $dependency_libs; do + case "$deplib" in + -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + case " $rpath $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + -L*) case "$compile_command $temp_deplibs " in + *" $deplib "*) ;; + *) temp_deplibs="$temp_deplibs $deplib";; + esac;; + *) temp_deplibs="$temp_deplibs $deplib";; + esac + done + dependency_libs="$temp_deplibs" + fi + + if test -z "$libdir"; then + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$deplibs$dependency_libs" + compile_command="$compile_command $dir/$old_library$dependency_libs" + finalize_command="$finalize_command $dir/$old_library$dependency_libs" + continue + fi + + # This library was specified with -dlopen. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking statically, + # we need to preload. + prev=dlprefiles + else + # We should not create a dependency on this library, but we + # may need any libraries it requires. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + prev= + continue + fi + fi + + # The library was specified with -dlpreopen. + if test "$prev" = dlprefiles; then + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + dlprefiles="$dlprefiles $dir/$old_library" + else + dlprefiles="$dlprefiles $dir/$linklib" + fi + prev= + fi + + if test "$build_libtool_libs" = yes && test -n "$library_names"; then + link_against_libtool_libs="$link_against_libtool_libs $arg" + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # We need an absolute path. + case "$dir" in + /* | [A-Za-z]:[/\\]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$libdir'" 1>&2 + exit 1 + fi + ;; + esac + + # This is the magic to use -rpath. + # Skip directories that are in the system default run-time + # search path, unless they have been requested with -R. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + + lib_linked=yes + case "$hardcode_action" in + immediate | unsupported) + if test "$hardcode_direct" = no; then + compile_command="$compile_command $dir/$linklib" + deplibs="$deplibs $dir/$linklib" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + dllsearchdir=`cd "$dir" && pwd || echo "$dir"` + if test -n "$dllsearchpath"; then + dllsearchpath="$dllsearchpath:$dllsearchdir" + else + dllsearchpath="$dllsearchdir" + fi + ;; + esac + elif test "$hardcode_minus_L" = no; then + case "$host" in + *-*-sunos*) + compile_shlibpath="$compile_shlibpath$dir:" + ;; + esac + case "$compile_command " in + *" -L$dir "*) ;; + *) compile_command="$compile_command -L$dir";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -L$dir -l$name" + elif test "$hardcode_shlibpath_var" = no; then + case ":$compile_shlibpath:" in + *":$dir:"*) ;; + *) compile_shlibpath="$compile_shlibpath$dir:";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -l$name" + else + lib_linked=no + fi + ;; + + relink) + if test "$hardcode_direct" = yes; then + compile_command="$compile_command $absdir/$linklib" + deplibs="$deplibs $absdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + case "$compile_command " in + *" -L$absdir "*) ;; + *) compile_command="$compile_command -L$absdir";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -L$absdir -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case ":$compile_shlibpath:" in + *":$absdir:"*) ;; + *) compile_shlibpath="$compile_shlibpath$absdir:";; + esac + compile_command="$compile_command -l$name" + deplibs="$deplibs -l$name" + else + lib_linked=no + fi + ;; + + *) + lib_linked=no + ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + finalize_command="$finalize_command $libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + case "$finalize_command " in + *" -L$libdir "*) ;; + *) finalize_command="$finalize_command -L$libdir";; + esac + finalize_command="$finalize_command -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case ":$finalize_shlibpath:" in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:";; + esac + finalize_command="$finalize_command -l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + case "$finalize_command " in + *" -L$dir "*) ;; + *) finalize_command="$finalize_command -L$libdir";; + esac + finalize_command="$finalize_command -l$name" + fi + else + # Transform directly to old archives if we don't build new libraries. + if test -n "$pic_flag" && test -z "$old_library"; then + $echo "$modename: cannot find static library for \`$arg'" 1>&2 + exit 1 + fi + + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_command="$compile_command $dir/$linklib" + finalize_command="$finalize_command $dir/$linklib" + else + case "$compile_command " in + *" -L$dir "*) ;; + *) compile_command="$compile_command -L$dir";; + esac + compile_command="$compile_command -l$name" + case "$finalize_command " in + *" -L$dir "*) ;; + *) finalize_command="$finalize_command -L$dir";; + esac + finalize_command="$finalize_command -l$name" + fi + fi + + # Add in any libraries that this one depends upon. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + esac + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + case "$output" in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *.a | *.lib) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + ;; + + *.la) + # Make sure we only generate libraries of the form `libNAME.la'. + case "$outputname" in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + if test -n "$objs"; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 + exit 1 + fi + + # How the heck are we supposed to write a wrapper for a shared library? + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 + exit 1 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test $# -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + libext=al + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + dependency_libs="$deplibs" + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + current="$2" + revision="$3" + age="$4" + + # Check that each of the things are valid numbers. + case "$current" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$revision" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$age" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test $age -gt $current; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case "$version_type" in + none) ;; + + irix) + major=`expr $current - $age + 1` + versuffix="$major.$revision" + verstring="sgi$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test $loop != 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="sgi$major.$iface:$verstring" + done + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test $loop != 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + windows) + # Like Linux, but with '-' rather than '.', since we only + # want one extension on Windows 95. + major=`expr $current - $age` + versuffix="-$major-$age-$revision" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + verstring="0.0" + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + dependency_libs="$deplibs" + case "$host" in + *-*-cygwin* | *-*-mingw* | *-*-os2*) + # these systems don't actually have a c library (as such)! + ;; + *) + # Add libc to deplibs on all other systems. + deplibs="$deplibs -lc" + ;; + esac + fi + + # Create the output directory, or remove our outputs if we need to. + if test -d $output_objdir; then + $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" + $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + else + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + if test "$build_libtool_libs" = yes; then + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case "$deplibs_check_method" in + pass_all) + newdeplibs=$deplibs + ;; # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behaviour. + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potlib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | sed 's/.* -> //'` + case "$potliblink" in + /*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" \ + | sed 10q \ + | egrep "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) newdeplibs="" + if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | + grep . >/dev/null; then + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + echo "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + dlname= + library_names= + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + fi + fi + fi + + # test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + deplibs=$newdeplibs + # Done checking deplibs! + + # Get the real and link names of the library. + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Ensure that we have .o objects for linkers which dislike .lo + # (e.g. aix) incase we are running --disable-static + for obj in $libobjs; do + oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"` + test -f $oldobj || ${LN_S} $obj $oldobj + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + if test -n "$whole_archive_flag_spec"; then + if test -n "$convenience"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + else + for xlib in $convenience; do + # Extract the objects. + xdir="$xlib"x + generated="$generated $xdir" + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x ../$xlib)" + $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? + + libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + + linkopts="$linkopts $flag" + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$objdir/$libname.exp" + $run $rm $export_symbols + eval cmds=\"$export_symbols_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + # Do each of the archive commands. + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + *.lo | *.o | *.obj) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case "$output" in + *.lo) + if test -n "$objs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Create the old-style object. + reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + + output="$obj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + test -z "$libobj" && exit 0 + + if test "$build_libtool_libs" != yes; then + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag"; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs" + output="$libobj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + else + # Just create a symlink. + $show $rm $libobj + $run $rm $libobj + $show "$LN_S $obj $libobj" + $run $LN_S $obj $libobj || exit $? + fi + + exit 0 + ;; + + # Anything else should be a program. + *) + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + if test "$dlself" = yes && test "$export_dynamic" = no; then + $echo "$modename: error: \`-dlopen self' requires \`-export-dynamic'" 1>&2 + exit 1 + fi + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$compile_rpath " in + *" $libdir "*) ;; + *) compile_rpath="$compile_rpath $libdir" ;; + esac + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" = yes; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case "$dlsyms" in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$objdir/${output}.nm" + + if test -d $objdir; then + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + else + $show "$mkdir $objdir" + $run $mkdir $objdir + status=$? + if test $status -ne 0 && test ! -d $objdir; then + exit $status + fi + fi + + # Parse the name list into a source file. + $show "creating $objdir/$dlsyms" + + $echo > "$objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$objdir/$output.exp" + $run $rm $export_symbols + $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run $rm $export_symbols + $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$objdir/$output.exp"' + $run eval 'grep -f "$objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`echo "$arg" | sed -e 's%^.*/%%'` + $run eval 'echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{\ +" + + sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ + -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ + < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr_t) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case "$host" in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + exit $? + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case "$dir" in + /* | [A-Za-z]:[/\\]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + # AGH! Flame the AIX and HP-UX people for me, will ya? + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Create the binary in the object directory, then wrap it. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $objdir; then + exit $status + fi + fi + + # Delete the old output file. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case "$0" in + /* | [A-Za-z]:[/\\]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + esac + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + link_against_libtool_libs='$link_against_libtool_libs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + echo >> $output "\ + program=lt-'$outputname' + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if (cd \"\$thisdir\" && eval \$relink_command); then : + else + $rm \"\$progdir/\$file\" + exit 1 + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + *-*-cygwin* | *-*-mingw | *-*-os2*) + # win32 systems need to use the prog path for dll + # lookup to work + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} +" + ;; + *) + $echo >> $output "\ + # Export the path to the program. + PATH=\"\$progdir:\$PATH\" + export PATH + + exec \$program \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + fi + addlibs="$old_convenience" + fi + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + xdir="$xlib"x + generated="$generated $xdir" + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x ../$xlib)" + $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? + + oldobjs="$oldobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` + done + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + eval cmds=\"$old_archive_cmds\" + fi + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case "$output" in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + if test -n "$xrpath"; then + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + done + dependency_libs="$temp_xrpath $dependency_libs" + fi + + # Only create the output if not a dry run. + if test -z "$run"; then + $echo > $output "\ +# $output - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + +# The name that we can dlopen(3). +dlname='$dlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=no + +# Directory that this library needs to be installed in: +libdir='$install_libdir'\ +" + + $rm "$output_objdir/$outputname"i + sed 's/^installed=no$/installed=yes/' \ + < "$output" > "$output_objdir/$outputname"i || exit 1 + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case "$arg" in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test $# -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case "$destdir" in + /* | [A-Za-z]:[/\\]*) ;; + *) + for file in $files; do + case "$file" in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case "$file" in + *.a | *.lib) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$realname $destdir/$realname" + $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? + test "X$dlname" = "X$realname" && dlname= + + if test $# -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + test "X$dlname" = "X$linkname" && dlname= + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + if test -n "$dlname"; then + # Install the dynamically-loadable library. + $show "$install_prog $dir/$dlname $destdir/$dlname" + $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $? + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + if test ! -f "$instname"; then + # Just in case it was removed... + $show "Creating $instname" + $rm "$instname" + sed 's/^installed=no$/installed=yes/' "$file" > "$instname" + fi + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case "$destfile" in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.o | *.obj) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + link_against_libtool_libs= + relink_command= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Check the variables that should have been set. + if test -z "$link_against_libtool_libs"; then + $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $link_against_libtool_libs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case "$lib" in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes; then + outputname="/tmp/$$-$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && $rm $outputname + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec $SHELL $0 --finish$current_libdirs + exit 1 + fi + + exit 0 + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit 0 + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + echo " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + echo "See any operating system documentation about shared libraries for" + echo "more information, such as the ld(1) and ld.so(8) manual pages." + echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case "$file" in + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case "$file" in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + + # Restore saved enviroment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now actually exec the command. + eval "exec \$cmd$args" + + $echo "$modename: cannot exec \$cmd$args" + exit 1 + else + # Display what would be done. + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool uninstall mode + uninstall) + modename="$modename: uninstall" + rm="$nonopt" + files= + + for arg + do + case "$arg" in + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + rmfiles="$file" + + case "$name" in + *.la) + # Possibly a libtool archive, so verify it. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $dir/$n" + test "X$n" = "X$dlname" && dlname= + done + test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname" + test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" + + $show "$rm $rmfiles" + $run $rm $rmfiles + + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + # FIXME: should reinstall the best remaining shared library. + fi + ;; + + *.lo) + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" + fi + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + + *) + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + esac + done + exit 0 + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 +fi # test -z "$show_help" + +# We need to display help for each of the modes. +case "$mode" in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --version print version information + +MODE must be one of the following: + + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE." + exit 0 + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; +esac + +echo +$echo "Try \`$modename --help' for more information about other modes." + +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/acsupport/missing b/acsupport/missing new file mode 100644 --- /dev/null +++ b/acsupport/missing @@ -0,0 +1,188 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997 Free Software Foundation, Inc. +# Franc,ois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing - GNU libit 0.0" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acinclude.m4' or \`configure.in'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`configure.in'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acconfig.h' or \`configure.in'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in` + if test -z "$files"; then + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in` + test -z "$files" || files="$files.in" + else + files=`echo "$files" | sed -e 's/:/ /g'` + fi + test -z "$files" && files="config.h.in" + touch $files + ;; + + automake) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print \ + | sed 's/^\(.*\).am$/touch \1.in/' \ + | sh + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 diff --git a/acsupport/mkinstalldirs b/acsupport/mkinstalldirs new file mode 100644 --- /dev/null +++ b/acsupport/mkinstalldirs @@ -0,0 +1,36 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman +# Created: 1993-05-16 +# Last modified: 1994-03-25 +# Public domain + +errstatus=0 + +for file in ${1+"$@"} ; do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d in ${1+"$@"} ; do + pathcomp="$pathcomp$d" + case "$pathcomp" in + -* ) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" 1>&2 + mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$? + fi + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# mkinstalldirs ends here diff --git a/configure b/configure --- a/configure +++ b/configure @@ -454,7 +454,7 @@ echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=host/COPYING +ac_unique_file=acsupport/config.guess # Find the source files, if location was not specified. if test -z "$srcdir"; then @@ -525,7 +525,7 @@ fi ac_aux_dir= -for ac_dir in host $srcdir/host; do +for ac_dir in acsupport $srcdir/acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -537,7 +537,7 @@ for ac_dir in host $srcdir/host; do fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in host $srcdir/host" 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in acsupport $srcdir/acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -820,519 +820,44 @@ fi -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:825: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:854: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break + echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6 +echo "configure:825: checking that a separate build tree is being used" >&5 + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:884: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break + if test "${ecos_cwd}" = "${srcdir}" ; then + echo "$ac_t""no" 1>&6 + { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; } + else + echo "$ac_t""yes" 1>&6 fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:935: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:967: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 978 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1009: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1014: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1042: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1078: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CXX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CXX="$ac_cv_prog_CXX" -if test -n "$CXX"; then - echo "$ac_t""$CXX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CXX" && break -done -test -n "$CXX" || CXX="gcc" +SUBDIRS="host" -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1110: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 - -ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - -cat > conftest.$ac_ext << EOF - -#line 1121 "configure" -#include "confdefs.h" - -int main(){return(0);} -EOF -if { (eval echo configure:1126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cxx_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cxx_cross=no - else - ac_cv_prog_cxx_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cxx_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 -if test $ac_cv_prog_cxx_works = no; then - { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1152: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 -cross_compiling=$ac_cv_prog_cxx_cross - -echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1157: checking whether we are using GNU C++" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gxx=yes -else - ac_cv_prog_gxx=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gxx" 1>&6 - -if test $ac_cv_prog_gxx = yes; then - GXX=yes -else - GXX= -fi - -ac_test_CXXFLAGS="${CXXFLAGS+set}" -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS= -echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1185: checking whether ${CXX-g++} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.cc -if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then - ac_cv_prog_cxx_g=yes -else - ac_cv_prog_cxx_g=no -fi -rm -f conftest* - -fi +PKGHOSTDIRS="" +FOUND_CONFIGURES="" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/*/*/current/host/configure" +for configure in ${FOUND_CONFIGURES}; do + if test -f ${configure}; then + hostdir=`dirname ${configure}` + hostdir=`echo ${hostdir} | sed -e "s:^${srcdir}/::"` + PKGHOSTDIRS="${PKGHOSTDIRS} ${hostdir}" + fi +done -echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS="$ac_save_CXXFLAGS" -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi - -echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1217: checking for object suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftest* -echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_objext" 1>&6 -OBJEXT=$ac_cv_objext -ac_objext=$ac_cv_objext - -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1241: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1274: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes +SUBDIRS="${SUBDIRS} ${PKGHOSTDIRS}" -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1305: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN" = yes || test "$MINGW32" = yes; then - ac_cv_exeext=.exe -else - rm -f conftest* - echo 'int main () { return 0; }' > conftest.$ac_ext - ac_cv_exeext= - if { (eval echo configure:1315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then - for file in conftest.*; do - case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; - *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; - esac - done - else - { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } - fi - rm -f conftest* - test x"${ac_cv_exeext}" = x && ac_cv_exeext=no -fi -fi - -EXEEXT="" -test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} -echo "$ac_t""${ac_cv_exeext}" 1>&6 -ac_exeext=$EXEEXT -subdirs="host" +subdirs="${SUBDIRS}" trap '' 1 2 15 cat > confcache <<\EOF @@ -1498,10 +1023,7 @@ s%@SET_MAKE@%$SET_MAKE%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g -s%@CC@%$CC%g -s%@CXX@%$CXX%g -s%@OBJEXT@%$OBJEXT%g -s%@EXEEXT@%$EXEEXT%g +s%@SUBDIRS@%$SUBDIRS%g s%@subdirs@%$subdirs%g CEOF @@ -1605,9 +1127,11 @@ rm -f conftest.s* EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +${CONFIG_SHELL-/bin/sh} ${top_srcdir}/acsupport/mkinstalldirs ${REQUIRED_DIRS} exit 0 EOF @@ -1640,7 +1164,7 @@ if test "$no_recursion" != yes; then esac done - for ac_config_dir in host; do + for ac_config_dir in ${SUBDIRS}; do # Do not complain, so a configure script can configure whichever # parts of a large source tree are present. diff --git a/configure.in b/configure.in --- a/configure.in +++ b/configure.in @@ -3,41 +3,31 @@ dnl ==================================== dnl dnl configure.in dnl -dnl Top-level configure script for eCos host-side software. +dnl Top-level configure script for eCos software. dnl dnl ==================================================================== -dnl ####ECOSGPLCOPYRIGHTBEGIN#### -dnl ------------------------------------------- -dnl This file is part of eCos, the Embedded Configurable Operating System. -dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### +dnl ---------------------------------------------------------------------------- +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl -dnl eCos is free software; you can redistribute it and/or modify it under -dnl the terms of the GNU General Public License as published by the Free -dnl Software Foundation; either version 2 or (at your option) any later version. -dnl -dnl eCos is distributed in the hope that it will be useful, but WITHOUT ANY -dnl WARRANTY; without even the implied warranty of MERCHANTABILITY or -dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -dnl for more details. +dnl This file is part of the eCos host tools. dnl -dnl You should have received a copy of the GNU General Public License along -dnl with eCos; if not, write to the Free Software Foundation, Inc., -dnl 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -dnl -dnl As a special exception, if other files instantiate templates or use macros -dnl or inline functions from this file, or you compile this file and link it -dnl with other works to produce a work based on this file, this file does not -dnl by itself cause the resulting work to be covered by the GNU General Public -dnl License. However the source code for this file must still be made available -dnl in accordance with section (3) of the GNU General Public License. -dnl -dnl This exception does not invalidate any other reasons why a work based on -dnl this file might be covered by the GNU General Public License. -dnl -dnl Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. -dnl at http://sources.redhat.com/ecos/ecos-license -dnl ------------------------------------------- -dnl ####ECOSGPLCOPYRIGHTEND#### +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) +dnl any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl more details. +dnl +dnl You should have received a copy of the GNU General Public License along with +dnl this program; if not, write to the Free Software Foundation, Inc., +dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +dnl ---------------------------------------------------------------------------- +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -49,28 +39,148 @@ dnl dnl####DESCRIPTIONEND#### dnl ==================================================================== -dnl For now the only work done via configure/make/make install is the -dnl host-side libs and tools. At some point this work may be extended -dnl to process the generic (non-package) documentation, and possibly -dnl to make releases of the target-side. +dnl eCos is a componentized architecture for deeply embedded systems. +dnl It requires a very different configuration system from typical +dnl autoconfiscated software such as the various GNU packages. +dnl +dnl The main eCos host-side software is autoconfiscated to some extent, +dnl in that the usual sequence of "configure;make;make install" will +dnl work under the right conditions. However it does not conform to +dnl the GNU coding standards in numerous ways, for example "make dist" +dnl will not work. The main eCos host-side software lives in the +dnl "host" subdirectory, and is built unconditionally. +dnl +dnl The eCos target-side software lives in the "packages" subdirectory, +dnl and is organized in numerous subdirectories corresponding to different +dnl packages and potentially different versions of each package. In the +dnl master repository managed by CVS there will only be one version of +dnl each package, "current", which simplifies things somewhat. Other +dnl repositories will not be quite so straightforward and require a +dnl suitable administration tool. +dnl +dnl The various eCos packages are not currently auto-confiscated. +dnl In particular building eCos requires the use of eCos configuration +dnl technology, not autoconf - there is simply no good way of handling +dnl a system as highly configurable as eCos using a few command-line +dnl options passed to "configure". There would also be serious confusion +dnl between host and target, especially when e.g. cross-compiling the +dnl host tools. However a possible future enhancement +dnl would involve making eCos releases via configure and make, thus +dnl allowing for a release process that combines building the various +dnl host-side tools such as gcc with creating eCos epk's for the various +dnl packages. +dnl +dnl A complication is that some of the eCos target-side packages also +dnl contain package-specific host-side support. For example the +dnl Linux synthetic target support uses special host-side software +dnl to provide I/O facilities: the architectural HAL package provdes +dnl generic support, the synthetic ethernet package extends this +dnl with ethernet support, and so on. Such package-specific host-side +dnl software does not belong in the main host subdirectory, that +dnl would make it very difficult to distribute new packages or +dnl new versions of a package. However keeping the code with the +dnl various packages makes building more complicated. dnl -dnl The support files are all kept in the host sub-directory, allowing -dnl that to be distributed as a coherent set of sources. +dnl 1) if the entire repository is managed by CVS or anoncvs, this +dnl configure script will search the packages tree for any packages +dnl that have host-side software that needs to be built - +dnl specifically, that have a file "configure" inside a "host" +dnl subdirectory in version "current" of a package. +dnl +dnl 2) if instead the repository contains additional packages +dnl installed as epk's and managed by an administration tool then +dnl it is the responsibility of that tool to let the users build +dnl and rebuild the host-side software as required, for whichever +dnl host platform or platforms are being used. In other words +dnl it is the responsibility of the admin tool to create a +dnl suitable build directory and run "configure; make; make install", +dnl usually as part of the installation process. Note that several +dnl versions of a package may be installed, and it is the +dnl responsibility of each package to take this into account +dnl (although the configure macros are aware of this to some extent, +dnl and will e.g. generate suitable install directory names). +dnl Also note that the top-level configure script will not pick +dnl up such packages because they will be versioned, i.e. the +dnl test for current/host/configure will fail because the +dnl version will not be "current". +dnl +dnl 3) as a special case it may be desirable to ship pre-built binaries +dnl of some of the package-specific software. It is not clear +dnl just what would be the best way of shipping these - putting +dnl them into the epk's would not be quite right because that would +dnl make the epk's host-specific rather than generic. +dnl +dnl There is an unresolved problem with possible dependencies between +dnl packages, if e.g. the host-side of the synthetic ethernet package could +dnl only be built after the architectural synthetic target package. -AC_INIT(host/COPYING) -AC_CONFIG_AUX_DIR(host) +dnl Some of the eCos documentation is generic and lives in the "doc" +dnl subdirectory. Other eCos documentation is package-specific and lives +dnl in the appropriate package directory. At present there is no support +dnl for building the documentation via configure and make, but such +dnl support may be added in future. +dnl +dnl There is a subdirectory acsupport containing various files such +dnl as config.guess and install.sh that are common. This also contains +dnl an acinclude.m4 file with various macros that are useful for +dnl eCos. + +dnl Generic initialization. +AC_INIT(acsupport/config.guess) +AC_CONFIG_AUX_DIR(acsupport) AC_CANONICAL_HOST AM_INIT_AUTOMAKE(eCos,2.0,0) AM_MAINTAINER_MODE +ECOS_CHECK_BUILD_ne_SRC -dnl The automake options include cygnus, so AC_EXEEXT is required and -dnl hence it is a good idea to include all of the compiler-selection -dnl tests. -AC_PROG_MAKE_SET -AC_PROG_CC -AC_PROG_CXX -AC_OBJEXT -AC_EXEEXT +dnl Nothing actually gets built in this directory, so there should be no +dnl need to worry about compiler flags etc. Instead, the problem is +dnl figuring out what should actually get built. +dnl +dnl 1) the host subdirectory should always get built. +SUBDIRS="host" + +dnl 2) any package which has a configure script in a +dnl current/host subdirectory should also get built. +dnl +dnl Searching the directory tree is currently done by shell globbing. +dnl Invoking "find" with suitable arguments might be quicker, but +dnl less portable. On some hosts there may be problems with environmental +dnl limits if too many packages provide host-side software. +dnl +dnl Currently there is no ordering of packages, so e.g. a device +dnl driver's host-side support cannot depend on some HAL package +dnl because the latter may not have been built and installed yet. +dnl This is a good thing because packages are meant to be self-contained +dnl whenever possible. Interaction between packages is typically handled +dnl at the Tcl level at run-time, so there are no build-time complications. -AC_CONFIG_SUBDIRS(host) +PKGHOSTDIRS="" +FOUND_CONFIGURES="" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/*/current/host/configure" +FOUND_CONFIGURES="${FOUND_CONFIGURES} ${srcdir}/packages/*/*/*/*/*/current/host/configure" +for configure in ${FOUND_CONFIGURES}; do + if test -f ${configure}; then + dnl A configure script has been found in the source tree. + dnl First turn it into a directory, then replace the absolute path + dnl with a relative one. + hostdir=`dirname ${configure}` + hostdir=`echo ${hostdir} | sed -e "s:^${srcdir}/::"` + PKGHOSTDIRS="${PKGHOSTDIRS} ${hostdir}" + fi +done + +SUBDIRS="${SUBDIRS} ${PKGHOSTDIRS}" + +dnl Because the eCos directory layout does not conform to GNU conventions +dnl it is necessary to create various levels of intermediate directories. +dnl This happens via config.status, prior to the recursion into the +dnl appropriate directories. +AC_OUTPUT_COMMANDS([${CONFIG_SHELL-/bin/sh} ${top_srcdir}/acsupport/mkinstalldirs ${REQUIRED_DIRS}],REQUIRED_DIRS="${SUBDIRS}") + +AC_SUBST(SUBDIRS) +AC_CONFIG_SUBDIRS(${SUBDIRS}) AC_OUTPUT(Makefile) diff --git a/host/ChangeLog b/host/ChangeLog --- a/host/ChangeLog +++ b/host/ChangeLog @@ -1,3 +1,8 @@ +2002-08-03 Bart Veer + + * acinclude.m4, configure.in, Makefile.am: + Rework host-side autoconf support + 2001-10-15 Julian Smart * Mounts /ecos-x now, not /x diff --git a/host/Makefile.am b/host/Makefile.am --- a/host/Makefile.am +++ b/host/Makefile.am @@ -6,10 +6,10 @@ ## eCos host-side software toplevel makefile ## ## ===================================================================== -######COPYRIGHTBEGIN#### -## +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### ## ---------------------------------------------------------------------------- -## Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +## Copyright (C) 2002 Bart Veer +## Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. ## ## This file is part of the eCos host tools. ## @@ -28,8 +28,7 @@ ## 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## ---------------------------------------------------------------------------- -## -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -41,5 +40,5 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus -SUBDIRS = @ECOS_DIRS@ +AUTOMAKE_OPTIONS = 1.3 foreign +SUBDIRS = @SUBDIRS@ diff --git a/host/Makefile.in b/host/Makefile.in --- a/host/Makefile.in +++ b/host/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,8 +10,8 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -######COPYRIGHTBEGIN#### -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -66,29 +66,33 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ -ECOS_DIRS = @ECOS_DIRS@ -EXEEXT = @EXEEXT@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ -OBJEXT = @OBJEXT@ +MSVC_SRCDIR = @MSVC_SRCDIR@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus -SUBDIRS = @ECOS_DIRS@ +AUTOMAKE_OPTIONS = 1.3 foreign +SUBDIRS = @SUBDIRS@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/../acsupport/mkinstalldirs CONFIG_CLEAN_FILES = -DIST_COMMON = README COPYING ChangeLog Makefile.am Makefile.in \ -acinclude.m4 aclocal.m4 config.guess config.sub configure configure.in \ -install-sh ltconfig ltmain.sh missing mkinstalldirs +DIST_COMMON = README ChangeLog Makefile.am Makefile.in acinclude.m4 \ +aclocal.m4 configure configure.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) @@ -98,9 +102,9 @@ GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -122,7 +126,7 @@ config.status: $(srcdir)/configure $(CON @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ @@ -148,7 +152,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ @@ -239,8 +243,13 @@ distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ @@ -263,12 +272,10 @@ info-am: info: info-recursive dvi-am: dvi: dvi-recursive -check-am: +check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive -install-info-am: -install-info: install-info-recursive install-exec-am: install-exec: install-exec-recursive @@ -325,12 +332,11 @@ installcheck-recursive info-recursive dv mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info install-exec-am install-exec install-data-am install-data \ -install-am install uninstall-am uninstall all-redirect all-am all \ -installdirs-am installdirs mostlyclean-generic distclean-generic \ -clean-generic maintainer-clean-generic clean mostlyclean distclean \ -maintainer-clean +dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +install-exec install-data-am install-data install-am install \ +uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/host/acinclude.m4 b/host/acinclude.m4 --- a/host/acinclude.m4 +++ b/host/acinclude.m4 @@ -4,14 +4,10 @@ dnl ==================================== dnl dnl acinclude.m4 dnl -dnl Various autoconf macros that are shared between different -dnl eCos packages. -dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer dnl dnl This file is part of the eCos host tools. dnl @@ -30,403 +26,19 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl dnl Author(s): bartv dnl Contact(s): bartv -dnl Date: 1998/12/16 +dnl Date: 2002/08/03 dnl Version: 0.01 dnl dnl####DESCRIPTIONEND#### dnl ==================================================================== -dnl ==================================================================== -dnl The AM_INIT_AUTOMAKE() will define a symbol VERSION for the -dnl package's version number. Unfortunately this symbol is rather -dnl hard to share if several different packages are involved, so this -dnl macro is used to define an alternative symbol - -AC_DEFUN(CYG_AC_SUBST_VERSION,[ - AC_REQUIRE([AM_INIT_AUTOMAKE]) - ifelse($#,1,,AC_MSG_ERROR([Invalid number of arguments passed to CYG AC_SUBST_VERSION])) - AC_DEFINE_UNQUOTED($1, "$VERSION") -]) - -dnl ==================================================================== -dnl Provide support for an automake conditional MSVC. Also set a -dnl variable MSVC to true or false, which may help other tests. - -AC_DEFUN(CYG_AC_PROG_MSVC,[ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_MSG_CHECKING("for Visual C++") - MSVC="no"; - if test "${CC}" = "cl" ; then - MSVC="yes" - fi - if test "${CXX}" = "cl" ; then - MSVC="yes" - fi - AM_CONDITIONAL(MSVC, test "${MSVC}" = "yes") - AC_MSG_RESULT(${MSVC}) -]) - -dnl ==================================================================== -dnl Set up sensible flags for the various different compilers. This -dnl is achieved by manipulating AM-CFLAGS and AM-CXXFLAGS via a subst, -dnl plus undoing the setting of CFLAGS and CXXFLAGS done by -dnl the AC_PROC_CC and AC_PROG_CXX macros. Note that this relies -dnl on knowing about the internals of those macros. -dnl -dnl There is no point in checking the cache, this macro does -dnl not do any feature tests. -dnl -dnl The VC++ variant might benefit from -Za, but the header files -dnl shipped with the compiler are incompatible with this option. - -AC_DEFUN(CYG_AC_PROG_STANDARD_COMPILER_FLAGS, [ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - AC_REQUIRE([CYG_AC_PROG_MSVC]) - - AC_MSG_CHECKING("the default compiler flags") - - dnl Add a user-settable flag to control whether or debugging info is - dnl incorporated at compile-time. - dnl - dnl NOTE: there may also have to be a flag to control whether or - dnl the VC++ multi-threading flags are enabled. - cygflags_enable_debug="no" - AC_ARG_ENABLE(debug,[ --enable-debug do a debug rather than a release build], - [case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; - esac]) - - dnl For VC++ builds also provide a flag for ANSI vs. unicode builds. - dnl For now this does not actually affect the compiler flags. - cygflags_enable_ansi="no" - if test "${MSVC}" = "yes" ; then - AC_ARG_ENABLE(ansi,[ --enable-ansi Do an ANSI rather than a unicode build], - [case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; - esac]) - fi - - dnl Now we know what the user is after. - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" - else - AC_MSG_ERROR("default flags for ${CC} are not known") - fi - - dnl Choose between debugging and optimization. - if test "${cygflags_enable_debug}" = "yes" ; then - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" - fi - else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" - fi - fi - - CFLAGS="${ac_save_CFLAGS}" - CXXFLAGS="${ac_save_CXXFLAGS}" - AC_SUBST(cyg_CFLAGS) - AC_SUBST(cyg_CXXFLAGS) - AC_MSG_RESULT(done) -]) - -dnl -------------------------------------------------------------------- -dnl User-settable options for assertions and tracing. -dnl -dnl The settable options are: -dnl --disable-asserts -dnl --disable-preconditions -dnl --disable-postconditions -dnl --disable-invariants -dnl --disable-loopinvariants -dnl --disable-tracing -dnl --disable-fntracing - -AC_DEFUN(CYG_AC_ARG_INFRASTRUCTURE, [ - -AC_REQUIRE([CYG_AC_PROG_STANDARD_COMPILER_FLAGS]) - -if test "${cygflags_enable_debug}" = "yes" ; then - cyginfra_asserts=yes - cyginfra_preconditions=yes - cyginfra_postconditions=yes - cyginfra_invariants=yes - cyginfra_loopinvariants=yes - cyginfra_tracing=yes - cyginfra_fntracing=yes -else - cyginfra_asserts=no - cyginfra_preconditions=no - cyginfra_postconditions=no - cyginfra_invariants=no - cyginfra_loopinvariants=no - cyginfra_tracing=no - cyginfra_fntracing=no -fi - -AC_ARG_ENABLE(asserts,[ --disable-asserts disable all assertions], -[case "${enableval}" in - yes) cyginfra_asserts=yes ;; - no) cyginfra_asserts=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-asserts option]) ;; -esac]) -if test "${cyginfra_asserts}" = "yes"; then - AC_DEFINE(CYGDBG_USE_ASSERTS) -fi - -AC_ARG_ENABLE(preconditions, [ --disable-preconditions disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_preconditions=yes ;; - no) cyginfra_preconditions=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-preconditions option]) ;; -esac]) -if test "${cyginfra_preconditions}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_PRECONDITIONS) -fi - -AC_ARG_ENABLE(postconditions, [ --disable-postconditions disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_postconditions=yes ;; - no) cyginfra_postconditions=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-postconditions option]) ;; -esac]) -if test "${cyginfra_postconditions}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_POSTCONDITIONS) -fi - -AC_ARG_ENABLE(invariants, [ --disable-invariants disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_invariants=yes ;; - no) cyginfra_invariants=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-invariants option]) ;; -esac]) -if test "${cyginfra_invariants}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_INVARIANTS) -fi - -AC_ARG_ENABLE(loopinvariants, [ --disable-loopinvariants disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_loopinvariants=yes ;; - no) cyginfra_loopinvariants=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-loopinvariants option]) ;; -esac]) -if test "${cyginfra_loopinvariants}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS) -fi - -AC_ARG_ENABLE(tracing,[ --disable-tracing disable tracing], -[case "${enableval}" in - yes) cyginfra_tracing=yes ;; - no) cyginfra_tracing=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-tracing option]) ;; -esac]) -if test "${cyginfra_tracing}" = "yes"; then - AC_DEFINE(CYGDBG_USE_TRACING) -fi - -AC_ARG_ENABLE(fntracing,[ --disable-fntracing disable function entry/exit tracing], -[case "${enableval}" in - yes) cyginfra_fntracing=yes ;; - no) cyginfra_fntracing=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-fntracing option]) ;; -esac]) -if test "${cyginfra_fntracing}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS) -fi - -]) - -dnl ==================================================================== -dnl Inspired by KDE's autoconfig -dnl This macro takes three Arguments like this: -dnl AC_FIND_FILE(foo.h, $incdirs, incdir) -dnl the filename to look for, the list of paths to check and -dnl the variable with the result. - -AC_DEFUN(AC_FIND_FILE, -[ -$3=NO -for i in $2; -do - for j in $1; - do - if test -r "$i/$j"; then - $3=$i - break 2 - fi - done -done -]) - - -dnl -------------------------------------------------------------------- -dnl Convert a cygwin pathname to something acceptable to VC++ (but -dnl still invoked from bash and cygwin's make). This means using -dnl the cygpath utility and then translating any backslashes into -dnl forward slashes to avoid confusing make. - -AC_DEFUN(CYG_AC_MSVC_PATH, [ - AC_REQUIRE([CYG_AC_PROG_MSVC]) - ifelse($#, 1, , AC_MSG_ERROR("Invalid number of arguments passed to CYG AC_MSVC_PATH")) - - if test "${MSVC}" = "yes" ; then - $1=`cygpath -w ${$1} | tr \\\\\\\\ /` - fi -]) - - -dnl -------------------------------------------------------------------- -dnl Work out details of the Tcl installation that should be used. -dnl This adds two command-line options, --with-tcl= to -dnl specify the Tcl install directory, and --with-tcl-version= -dnl to control which version of Tcl should be used. -dnl -dnl On Unix systems and under cygwin there should be a file -dnl $(tcl_prefix)/lib/tclConfig.sh containing all the information -dnl needed for Tcl. This file are consulted and the appropriate -dnl variables extracted. -dnl -dnl To confuse matters, subtly different naming conventions are used -dnl under Unix and NT. Under Unix the Tcl library will be called -dnl libtcl8.0.a, libtcl8.1.a, etc. with a dot between the major and -dnl minor version. Under NT (including cygwin) the library will be -dnl called tcl80.lib, dnl tcl81.lib, libtcl80.a, libtcl81.a, etc. -dnl without a dot. -dnl -dnl The macro should really assume that it is running inside devo, -dnl with tcl and tcl8.1 directories present and already configured. -dnl This is tricky for a number of reasons, including confusion about -dnl the meaning of top_srcdir. -dnl -dnl This macro defines four new shell variables which will be -dnl substituted (typically into Makefile.in): -dnl -dnl cyg_ac_tcl_version - the version of Tcl that is to be used -dnl cyg_ac_tcl_incdir - location of etc al -dnl cyg_ac_tcl_libdir - location of libtcl.a/tcl.lib etc. -dnl cyg_ac_tcl_libs - all of the libraries that are needed for Tcl - -AC_DEFUN(CYG_AC_PATH_TCL, [ - -AC_REQUIRE([CYG_AC_PROG_MSVC]) -AC_REQUIRE([AC_CYGWIN]) - -dnl Look for the version of Tcl. If none is specified, default to -dnl 8.0 under VC++ and cygwin, nothing under Unix. A version has to be -dnl specified under NT because there is no symbolic link from libtcl.a -dnl to whatever happens to be the most recent installed version. - -AC_MSG_CHECKING(for Tcl version) -AC_ARG_WITH(tcl-version,[ --with-tcl-version= version of Tcl to be used],[ - cyg_ac_tcl_version=${with_tcl_version} -],[ - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi -]) -AC_MSG_RESULT(${cyg_ac_tcl_version}) -AC_SUBST(cyg_ac_tcl_version) - -dnl Where is the Tcl installation? By default assume Tcl is already -dnl installed in the same place as the eCos host-side. - -AC_ARG_WITH(tcl,[ --with-tcl-header= location of Tcl header]) -AC_ARG_WITH(tcl,[ --with-tcl-lib= location of Tcl libraries]) -AC_ARG_WITH(tcl,[ --with-tcl= location of Tcl header and libraries]) - -AC_MSG_CHECKING(for Tcl installation) - -dnl If using VC++ then there are no sensible default directories -dnl to search for a Tcl installation. Instead the user must -dnl supply either --with-tcl, or both --with-tcl-header and -dnl --with-tcl-lib. -dnl -dnl Also when using VC++ there is no tclConfig.sh file to -dnl consult about which libraries are needed. Instead that -dnl information is hard-wired here. - -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=) - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=) - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" -else - tcl_incdirs="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl$cyg_ac_tcl_version /usr/include" - AC_FIND_FILE(tcl.h, $tcl_incdirs, cyg_ac_tcl_incdir) - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - AC_FIND_FILE(tclConfig.sh, $tcl_libdirs, cyg_ac_tcl_libdir) - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - AC_MSG_ERROR(unable to locate Tcl config file tclConfig.sh) - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -dnl Sanity check, make sure that there is a tcl.h header file. -dnl If not then there is no point in proceeding. -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - AC_MSG_ERROR(unable to locate Tcl header file tcl.h) -fi - -if test "${MSVC}" = "yes" ; then - CYG_AC_MSVC_PATH(cyg_ac_tcl_incdir) - CYG_AC_MSVC_PATH(cyg_ac_tcl_libdir) -fi - -AC_MSG_RESULT(${cyg_ac_tcl_libdir}) - -AC_SUBST(cyg_ac_tcl_incdir) -AC_SUBST(cyg_ac_tcl_libdir) -AC_SUBST(cyg_ac_tcl_libs) -AC_SUBST(cyg_ac_tk_libs) -]) - - - +dnl Access shared macros. +dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not +dnl incorporate the macro into aclocal.m4 +sinclude(../acsupport/acinclude.m4) diff --git a/host/aclocal.m4 b/host/aclocal.m4 --- a/host/aclocal.m4 +++ b/host/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -16,14 +16,10 @@ dnl ==================================== dnl dnl acinclude.m4 dnl -dnl Various autoconf macros that are shared between different -dnl eCos packages. -dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer dnl dnl This file is part of the eCos host tools. dnl @@ -42,406 +38,35 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl dnl Author(s): bartv dnl Contact(s): bartv -dnl Date: 1998/12/16 +dnl Date: 2002/08/03 dnl Version: 0.01 dnl dnl####DESCRIPTIONEND#### dnl ==================================================================== -dnl ==================================================================== -dnl The AM_INIT_AUTOMAKE() will define a symbol VERSION for the -dnl package's version number. Unfortunately this symbol is rather -dnl hard to share if several different packages are involved, so this -dnl macro is used to define an alternative symbol - -AC_DEFUN(CYG_AC_SUBST_VERSION,[ - AC_REQUIRE([AM_INIT_AUTOMAKE]) - ifelse($#,1,,AC_MSG_ERROR([Invalid number of arguments passed to CYG AC_SUBST_VERSION])) - AC_DEFINE_UNQUOTED($1, "$VERSION") -]) - -dnl ==================================================================== -dnl Provide support for an automake conditional MSVC. Also set a -dnl variable MSVC to true or false, which may help other tests. - -AC_DEFUN(CYG_AC_PROG_MSVC,[ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_MSG_CHECKING("for Visual C++") - MSVC="no"; - if test "${CC}" = "cl" ; then - MSVC="yes" - fi - if test "${CXX}" = "cl" ; then - MSVC="yes" - fi - AM_CONDITIONAL(MSVC, test "${MSVC}" = "yes") - AC_MSG_RESULT(${MSVC}) -]) - -dnl ==================================================================== -dnl Set up sensible flags for the various different compilers. This -dnl is achieved by manipulating AM-CFLAGS and AM-CXXFLAGS via a subst, -dnl plus undoing the setting of CFLAGS and CXXFLAGS done by -dnl the AC_PROC_CC and AC_PROG_CXX macros. Note that this relies -dnl on knowing about the internals of those macros. -dnl -dnl There is no point in checking the cache, this macro does -dnl not do any feature tests. -dnl -dnl The VC++ variant might benefit from -Za, but the header files -dnl shipped with the compiler are incompatible with this option. - -AC_DEFUN(CYG_AC_PROG_STANDARD_COMPILER_FLAGS, [ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - AC_REQUIRE([CYG_AC_PROG_MSVC]) - - AC_MSG_CHECKING("the default compiler flags") - - dnl Add a user-settable flag to control whether or debugging info is - dnl incorporated at compile-time. - dnl - dnl NOTE: there may also have to be a flag to control whether or - dnl the VC++ multi-threading flags are enabled. - cygflags_enable_debug="no" - AC_ARG_ENABLE(debug,[ --enable-debug do a debug rather than a release build], - [case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; - esac]) - - dnl For VC++ builds also provide a flag for ANSI vs. unicode builds. - dnl For now this does not actually affect the compiler flags. - cygflags_enable_ansi="no" - if test "${MSVC}" = "yes" ; then - AC_ARG_ENABLE(ansi,[ --enable-ansi Do an ANSI rather than a unicode build], - [case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; - esac]) - fi - - dnl Now we know what the user is after. - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" - else - AC_MSG_ERROR("default flags for ${CC} are not known") - fi +dnl Access shared macros. +dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not +dnl incorporate the macro into aclocal.m4 +sinclude(../acsupport/acinclude.m4) - dnl Choose between debugging and optimization. - if test "${cygflags_enable_debug}" = "yes" ; then - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" - fi - else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" - fi - fi - - CFLAGS="${ac_save_CFLAGS}" - CXXFLAGS="${ac_save_CXXFLAGS}" - AC_SUBST(cyg_CFLAGS) - AC_SUBST(cyg_CXXFLAGS) - AC_MSG_RESULT(done) -]) - -dnl -------------------------------------------------------------------- -dnl User-settable options for assertions and tracing. -dnl -dnl The settable options are: -dnl --disable-asserts -dnl --disable-preconditions -dnl --disable-postconditions -dnl --disable-invariants -dnl --disable-loopinvariants -dnl --disable-tracing -dnl --disable-fntracing - -AC_DEFUN(CYG_AC_ARG_INFRASTRUCTURE, [ - -AC_REQUIRE([CYG_AC_PROG_STANDARD_COMPILER_FLAGS]) - -if test "${cygflags_enable_debug}" = "yes" ; then - cyginfra_asserts=yes - cyginfra_preconditions=yes - cyginfra_postconditions=yes - cyginfra_invariants=yes - cyginfra_loopinvariants=yes - cyginfra_tracing=yes - cyginfra_fntracing=yes -else - cyginfra_asserts=no - cyginfra_preconditions=no - cyginfra_postconditions=no - cyginfra_invariants=no - cyginfra_loopinvariants=no - cyginfra_tracing=no - cyginfra_fntracing=no -fi - -AC_ARG_ENABLE(asserts,[ --disable-asserts disable all assertions], -[case "${enableval}" in - yes) cyginfra_asserts=yes ;; - no) cyginfra_asserts=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-asserts option]) ;; -esac]) -if test "${cyginfra_asserts}" = "yes"; then - AC_DEFINE(CYGDBG_USE_ASSERTS) -fi - -AC_ARG_ENABLE(preconditions, [ --disable-preconditions disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_preconditions=yes ;; - no) cyginfra_preconditions=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-preconditions option]) ;; -esac]) -if test "${cyginfra_preconditions}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_PRECONDITIONS) -fi - -AC_ARG_ENABLE(postconditions, [ --disable-postconditions disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_postconditions=yes ;; - no) cyginfra_postconditions=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-postconditions option]) ;; -esac]) -if test "${cyginfra_postconditions}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_POSTCONDITIONS) -fi - -AC_ARG_ENABLE(invariants, [ --disable-invariants disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_invariants=yes ;; - no) cyginfra_invariants=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-invariants option]) ;; -esac]) -if test "${cyginfra_invariants}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_INVARIANTS) -fi +# Define a conditional. -AC_ARG_ENABLE(loopinvariants, [ --disable-loopinvariants disable a subset of the assertions], -[case "${enableval}" in - yes) cyginfra_loopinvariants=yes ;; - no) cyginfra_loopinvariants=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-loopinvariants option]) ;; -esac]) -if test "${cyginfra_loopinvariants}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS) -fi - -AC_ARG_ENABLE(tracing,[ --disable-tracing disable tracing], -[case "${enableval}" in - yes) cyginfra_tracing=yes ;; - no) cyginfra_tracing=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-tracing option]) ;; -esac]) -if test "${cyginfra_tracing}" = "yes"; then - AC_DEFINE(CYGDBG_USE_TRACING) -fi - -AC_ARG_ENABLE(fntracing,[ --disable-fntracing disable function entry/exit tracing], -[case "${enableval}" in - yes) cyginfra_fntracing=yes ;; - no) cyginfra_fntracing=no ;; - *) AC_MSG_ERROR([bad value ${enableval} for disable-fntracing option]) ;; -esac]) -if test "${cyginfra_fntracing}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS) -fi - -]) - -dnl ==================================================================== -dnl Inspired by KDE's autoconfig -dnl This macro takes three Arguments like this: -dnl AC_FIND_FILE(foo.h, $incdirs, incdir) -dnl the filename to look for, the list of paths to check and -dnl the variable with the result. - -AC_DEFUN(AC_FIND_FILE, -[ -$3=NO -for i in $2; -do - for j in $1; - do - if test -r "$i/$j"; then - $3=$i - break 2 - fi - done -done -]) - - -dnl -------------------------------------------------------------------- -dnl Convert a cygwin pathname to something acceptable to VC++ (but -dnl still invoked from bash and cygwin's make). This means using -dnl the cygpath utility and then translating any backslashes into -dnl forward slashes to avoid confusing make. - -AC_DEFUN(CYG_AC_MSVC_PATH, [ - AC_REQUIRE([CYG_AC_PROG_MSVC]) - ifelse($#, 1, , AC_MSG_ERROR("Invalid number of arguments passed to CYG AC_MSVC_PATH")) - - if test "${MSVC}" = "yes" ; then - $1=`cygpath -w ${$1} | tr \\\\\\\\ /` - fi -]) - - -dnl -------------------------------------------------------------------- -dnl Work out details of the Tcl installation that should be used. -dnl This adds two command-line options, --with-tcl= to -dnl specify the Tcl install directory, and --with-tcl-version= -dnl to control which version of Tcl should be used. -dnl -dnl On Unix systems and under cygwin there should be a file -dnl $(tcl_prefix)/lib/tclConfig.sh containing all the information -dnl needed for Tcl. This file are consulted and the appropriate -dnl variables extracted. -dnl -dnl To confuse matters, subtly different naming conventions are used -dnl under Unix and NT. Under Unix the Tcl library will be called -dnl libtcl8.0.a, libtcl8.1.a, etc. with a dot between the major and -dnl minor version. Under NT (including cygwin) the library will be -dnl called tcl80.lib, dnl tcl81.lib, libtcl80.a, libtcl81.a, etc. -dnl without a dot. -dnl -dnl The macro should really assume that it is running inside devo, -dnl with tcl and tcl8.1 directories present and already configured. -dnl This is tricky for a number of reasons, including confusion about -dnl the meaning of top_srcdir. -dnl -dnl This macro defines four new shell variables which will be -dnl substituted (typically into Makefile.in): -dnl -dnl cyg_ac_tcl_version - the version of Tcl that is to be used -dnl cyg_ac_tcl_incdir - location of etc al -dnl cyg_ac_tcl_libdir - location of libtcl.a/tcl.lib etc. -dnl cyg_ac_tcl_libs - all of the libraries that are needed for Tcl - -AC_DEFUN(CYG_AC_PATH_TCL, [ - -AC_REQUIRE([CYG_AC_PROG_MSVC]) -AC_REQUIRE([AC_CYGWIN]) - -dnl Look for the version of Tcl. If none is specified, default to -dnl 8.0 under VC++ and cygwin, nothing under Unix. A version has to be -dnl specified under NT because there is no symbolic link from libtcl.a -dnl to whatever happens to be the most recent installed version. - -AC_MSG_CHECKING(for Tcl version) -AC_ARG_WITH(tcl-version,[ --with-tcl-version= version of Tcl to be used],[ - cyg_ac_tcl_version=${with_tcl_version} -],[ - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi -]) -AC_MSG_RESULT(${cyg_ac_tcl_version}) -AC_SUBST(cyg_ac_tcl_version) - -dnl Where is the Tcl installation? By default assume Tcl is already -dnl installed in the same place as the eCos host-side. - -AC_ARG_WITH(tcl,[ --with-tcl-header= location of Tcl header]) -AC_ARG_WITH(tcl,[ --with-tcl-lib= location of Tcl libraries]) -AC_ARG_WITH(tcl,[ --with-tcl= location of Tcl header and libraries]) - -AC_MSG_CHECKING(for Tcl installation) - -dnl If using VC++ then there are no sensible default directories -dnl to search for a Tcl installation. Instead the user must -dnl supply either --with-tcl, or both --with-tcl-header and -dnl --with-tcl-lib. -dnl -dnl Also when using VC++ there is no tclConfig.sh file to -dnl consult about which libraries are needed. Instead that -dnl information is hard-wired here. - -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=) - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - AC_MSG_ERROR(You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=) - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" +AC_DEFUN([AM_CONDITIONAL], +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' else - tcl_incdirs="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl$cyg_ac_tcl_version /usr/include" - AC_FIND_FILE(tcl.h, $tcl_incdirs, cyg_ac_tcl_incdir) - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - AC_FIND_FILE(tclConfig.sh, $tcl_libdirs, cyg_ac_tcl_libdir) - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - AC_MSG_ERROR(unable to locate Tcl config file tclConfig.sh) - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -dnl Sanity check, make sure that there is a tcl.h header file. -dnl If not then there is no point in proceeding. -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - AC_MSG_ERROR(unable to locate Tcl header file tcl.h) -fi - -if test "${MSVC}" = "yes" ; then - CYG_AC_MSVC_PATH(cyg_ac_tcl_incdir) - CYG_AC_MSVC_PATH(cyg_ac_tcl_libdir) -fi - -AC_MSG_RESULT(${cyg_ac_tcl_libdir}) - -AC_SUBST(cyg_ac_tcl_incdir) -AC_SUBST(cyg_ac_tcl_libdir) -AC_SUBST(cyg_ac_tcl_libs) -AC_SUBST(cyg_ac_tk_libs) -]) - - - + $1_TRUE='#' + $1_FALSE= +fi]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. @@ -452,7 +77,7 @@ AC_SUBST(cyg_ac_tk_libs) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -480,7 +105,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -521,7 +146,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -535,25 +160,12 @@ else fi AC_SUBST($1)]) -# Define a conditional. - -AC_DEFUN(AM_CONDITIONAL, -[AC_SUBST($1_TRUE) -AC_SUBST($1_FALSE) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi]) - # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, diff --git a/host/config.guess b/host/config.guess deleted file mode 100644 --- a/host/config.guess +++ /dev/null @@ -1,1171 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 -# Free Software Foundation, Inc. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Written by Per Bothner . -# Please send patches to . -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# - -# Use $HOST_CC if defined. $CC may point to a cross-compiler -if test x"$CC_FOR_BUILD" = x; then - if test x"$HOST_CC" != x; then - CC_FOR_BUILD="$HOST_CC" - else - if test x"$CC" != x; then - CC_FOR_BUILD="$CC" - else - CC_FOR_BUILD=cc - fi - fi -fi - - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 8/24/94.) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # Netbsd (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # Determine the machine/vendor (is the vendor relevant). - case "${UNAME_MACHINE}" in - amiga) machine=m68k-cbm ;; - arm32) machine=arm-unknown ;; - atari*) machine=m68k-atari ;; - sun3*) machine=m68k-sun ;; - mac68k) machine=m68k-apple ;; - macppc) machine=powerpc-apple ;; - hp3[0-9][05]) machine=m68k-hp ;; - ibmrt|romp-ibm) machine=romp-ibm ;; - *) machine=${UNAME_MACHINE}-unknown ;; - esac - # The Operating System including object format. - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - # The OS release - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit 0 ;; - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - cat <$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - esac - fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-cbm-sysv4 - exit 0;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - arc64:OpenBSD:*:*) - echo mips64el-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hkmips:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - SR2?01:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - atari*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - sun3*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy \ - && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:4) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` - if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=4.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - sed 's/^ //' << EOF >$dummy.c - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` - rm -f $dummy.c $dummy - esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i?86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - hppa*:OpenBSD:*:*) - echo hppa-unknown-openbsd - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3E:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; - F300:UNIX_System_V:*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - F301:UNIX_System_V:*:*) - echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - i?86:BSD/386:*:* | i?86:BSD/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - if test -x /usr/bin/objformat; then - if test "elf" = "`/usr/bin/objformat`"; then - echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` - exit 0 - fi - fi - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - *:Linux:*:*) - - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - ld_help_string=`cd /; ld --help 2>&1` - ld_supported_emulations=`echo $ld_help_string \ - | sed -ne '/supported emulations:/!d - s/[ ][ ]*/ /g - s/.*supported emulations: *// - s/ .*// - p'` - case "$ld_supported_emulations" in - *ia64) - echo "${UNAME_MACHINE}-unknown-linux" - exit 0 - ;; - i?86linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 - ;; - i?86coff) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 - ;; - sparclinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - armlinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32arm*) - echo "${UNAME_MACHINE}-unknown-linux-gnuoldld" - exit 0 - ;; - armelf_linux*) - echo "${UNAME_MACHINE}-unknown-linux-gnu" - exit 0 - ;; - m68klinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32ppc | elf32ppclinux) - # Determine Lib Version - cat >$dummy.c < -#if defined(__GLIBC__) -extern char __libc_version[]; -extern char __libc_release[]; -#endif -main(argc, argv) - int argc; - char *argv[]; -{ -#if defined(__GLIBC__) - printf("%s %s\n", __libc_version, __libc_release); -#else - printf("unkown\n"); -#endif - return 0; -} -EOF - LIBC="" - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy | grep 1\.99 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.c $dummy - echo powerpc-unknown-linux-gnu${LIBC} - exit 0 - ;; - esac - - if test "${UNAME_MACHINE}" = "alpha" ; then - cat <$dummy.s - .data - \$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main - main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - LIBC="" - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - esac - - objdump --private-headers $dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 - elif test "${UNAME_MACHINE}" = "mips" ; then - cat >$dummy.c < /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __MIPSEB__ - printf ("%s-unknown-linux-gnu\n", argv[1]); -#endif -#ifdef __MIPSEL__ - printf ("%sel-unknown-linux-gnu\n", argv[1]); -#endif - return 0; -} -EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - elif test "${UNAME_MACHINE}" = "s390"; then - echo s390-ibm-linux && exit 0 - else - # Either a pre-BFD a.out linker (linux-gnuoldld) - # or one that does not give us useful --help. - # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. - # If ld does not provide *any* "supported emulations:" - # that means it is gnuoldld. - echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" - test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 - - case "${UNAME_MACHINE}" in - i?86) - VENDOR=pc; - ;; - *) - VENDOR=unknown; - ;; - esac - # Determine whether the default compiler is a.out or elf - cat >$dummy.c < -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __ELF__ -# ifdef __GLIBC__ -# if __GLIBC__ >= 2 - printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -#else - printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); -#endif - return 0; -} -EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - fi ;; -# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions -# are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) - echo i386-sequent-sysv4 - exit 0 ;; - i?86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i?86:*:5:7*) - # Fixed at (any) Pentium or better - UNAME_MACHINE=i586 - if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then - echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} - fi - exit 0 ;; - i?86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - i?86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:*:6*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - Power*:Mac*OS:*:*) - echo powerpc-apple-macos${UNAME_RELEASE} - exit 0 ;; - *:Mac*OS:*:*) - echo ${UNAME_MACHINE}-apple-macos${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-qnx-qnx${UNAME_VERSION} - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 -rm -f $dummy.c $dummy - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -#echo '(Unable to guess system type)' 1>&2 - -exit 1 diff --git a/host/config.sub b/host/config.sub deleted file mode 100644 --- a/host/config.sub +++ /dev/null @@ -1,1250 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 -# Free Software Foundation, Inc. -# -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Written by Per Bothner . -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi - -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - linux-gnu*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ - | 580 | i960 | h8300 \ - | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ - | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ - | alphaev6[78] \ - | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \ - | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \ - | mips64orion | mips64orionel | mipstx39 | mipstx39el \ - | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ - | mips64vr5000 | miprs64vr5000el | mcore \ - | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \ - | thumb | d10v | fr30 | avr) - basic_machine=$basic_machine-unknown - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i[34567]86) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - # FIXME: clean up the formatting here. - vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ - | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ - | xmp-* | ymp-* \ - | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ - | alphaev6[78]-* \ - | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ - | clipper-* | orion-* \ - | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ - | mipstx39-* | mipstx39el-* | mcore-* \ - | f301-* | armv*-* | s390-* | sv1-* | t3e-* \ - | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ - | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* ) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-cbm - ;; - amigaos | amigados) - basic_machine=m68k-cbm - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-cbm - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - [ctj]90-cray) - basic_machine=c90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[34567]86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i[34567]86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i[34567]86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i[34567]86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - i386-go32 | go32) - basic_machine=i386-unknown - os=-go32 - ;; - i386-mingw32 | mingw32) - basic_machine=i386-unknown - os=-mingw32 - ;; - i386-qnx | qnx) - basic_machine=i386-qnx - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mipsel*-linux*) - basic_machine=mipsel-unknown - os=-linux-gnu - ;; - mips*-linux*) - basic_machine=mips-unknown - os=-linux-gnu - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - msdos) - basic_machine=i386-unknown - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - np1) - basic_machine=np1-gould - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexen) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86) - basic_machine=i686-pc - ;; - pentiumii | pentium2) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexen-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=rs6000-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sparclite-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=t3e-cray - os=-unicos - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xmp) - basic_machine=xmp-cray - os=-unicos - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - mips) - if [ x$os = x-linux-gnu ]; then - basic_machine=mips-unknown - else - basic_machine=mips-mips - fi - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sparc | sparcv9) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - c4x*) - basic_machine=c4x-none - os=-coff - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -ns2 ) - os=-nextstep2 - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -qnx) - os=-qnx4 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -*MiNT) - os=-mint - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f301-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -*MiNT) - vendor=atari - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os diff --git a/host/configure b/host/configure --- a/host/configure +++ b/host/configure @@ -14,32 +14,6 @@ ac_default_prefix=/usr/local ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" -ac_help="$ac_help - --enable-debug do a debug rather than a release build" -ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" -ac_help="$ac_help - --disable-asserts disable all assertions" -ac_help="$ac_help - --disable-preconditions disable a subset of the assertions" -ac_help="$ac_help - --disable-postconditions disable a subset of the assertions" -ac_help="$ac_help - --disable-invariants disable a subset of the assertions" -ac_help="$ac_help - --disable-loopinvariants disable a subset of the assertions" -ac_help="$ac_help - --disable-tracing disable tracing" -ac_help="$ac_help - --disable-fntracing disable function entry/exit tracing" -ac_help="$ac_help - --with-tcl-version= version of Tcl to be used" -ac_help="$ac_help - --with-tcl-header= location of Tcl header" -ac_help="$ac_help - --with-tcl-lib= location of Tcl libraries" -ac_help="$ac_help - --with-tcl= location of Tcl header and libraries" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -480,7 +454,7 @@ echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=config.guess +ac_unique_file=../acsupport/config.guess # Find the source files, if location was not specified. if test -z "$srcdir"; then @@ -551,7 +525,7 @@ fi ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +for ac_dir in ../acsupport $srcdir/../acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -563,7 +537,7 @@ for ac_dir in $srcdir $srcdir/.. $srcdir fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in ../acsupport $srcdir/../acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -576,7 +550,7 @@ else { echo "configure: error: can not r fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:580: checking host system type" >&5 +echo "configure:554: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -608,7 +582,7 @@ echo "$ac_t""$host" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:612: checking for a BSD compatible install" >&5 +echo "configure:586: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -661,7 +635,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:665: checking whether build environment is sane" >&5 +echo "configure:639: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -718,7 +692,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:722: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:696: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -757,7 +731,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:761: checking for working aclocal" >&5 +echo "configure:735: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -770,7 +744,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:774: checking for working autoconf" >&5 +echo "configure:748: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -783,7 +757,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:787: checking for working automake" >&5 +echo "configure:761: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -796,7 +770,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:800: checking for working autoheader" >&5 +echo "configure:774: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -809,7 +783,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:813: checking for working makeinfo" >&5 +echo "configure:787: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -823,7 +797,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:827: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:801: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -846,905 +820,26 @@ fi -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:851: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:878: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:913: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:943: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break + echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6 +echo "configure:825: checking that a separate build tree is being used" >&5 + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:994: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break + if test "${ecos_cwd}" = "${srcdir}" ; then + echo "$ac_t""no" 1>&6 + { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; } + else + echo "$ac_t""yes" 1>&6 fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1026: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 1037 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:1042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1068: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1073: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1101: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1137: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CXX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CXX="$ac_cv_prog_CXX" -if test -n "$CXX"; then - echo "$ac_t""$CXX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CXX" && break -done -test -n "$CXX" || CXX="gcc" -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1169: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 - -ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - -cat > conftest.$ac_ext << EOF - -#line 1180 "configure" -#include "confdefs.h" - -int main(){return(0);} -EOF -if { (eval echo configure:1185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cxx_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cxx_cross=no - else - ac_cv_prog_cxx_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cxx_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 -if test $ac_cv_prog_cxx_works = no; then - { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1211: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 -cross_compiling=$ac_cv_prog_cxx_cross - -echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1216: checking whether we are using GNU C++" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gxx=yes -else - ac_cv_prog_gxx=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gxx" 1>&6 - -if test $ac_cv_prog_gxx = yes; then - GXX=yes -else - GXX= -fi - -ac_test_CXXFLAGS="${CXXFLAGS+set}" -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS= -echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1244: checking whether ${CXX-g++} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.cc -if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then - ac_cv_prog_cxx_g=yes -else - ac_cv_prog_cxx_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS="$ac_save_CXXFLAGS" -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi - -echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1276: checking for object suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftest* -echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_objext" 1>&6 -OBJEXT=$ac_cv_objext -ac_objext=$ac_cv_objext - -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1300: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes - - -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1331: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN" = yes || test "$MINGW32" = yes; then - ac_cv_exeext=.exe -else - rm -f conftest* - echo 'int main () { return 0; }' > conftest.$ac_ext - ac_cv_exeext= - if { (eval echo configure:1341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then - for file in conftest.*; do - case $file in - *.c | *.o | *.obj) ;; - *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; - esac - done - else - { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } - fi - rm -f conftest* - test x"${ac_cv_exeext}" = x && ac_cv_exeext=no -fi -fi - -EXEEXT="" -test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} -echo "$ac_t""${ac_cv_exeext}" 1>&6 -ac_exeext=$EXEEXT - - - - - - echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1366: checking "for Visual C++"" >&5 - MSVC="no"; - if test "${CC}" = "cl" ; then - MSVC="yes" - fi - if test "${CXX}" = "cl" ; then - MSVC="yes" - fi - - -if test "${MSVC}" = "yes"; then - MSVC_TRUE= - MSVC_FALSE='#' -else - MSVC_TRUE='#' - MSVC_FALSE= -fi - echo "$ac_t""${MSVC}" 1>&6 - - - - - - - - echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1392: checking "the default compiler flags"" >&5 - - cygflags_enable_debug="no" - # Check whether --enable-debug or --disable-debug was given. -if test "${enable_debug+set}" = set; then - enableval="$enable_debug" - case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; - esac -fi - - - cygflags_enable_ansi="no" - if test "${MSVC}" = "yes" ; then - # Check whether --enable-ansi or --disable-ansi was given. -if test "${enable_ansi+set}" = set; then - enableval="$enable_ansi" - case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; - esac -fi - - fi - - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" - else - { echo "configure: error: "default flags for ${CC} are not known"" 1>&2; exit 1; } - fi - - if test "${cygflags_enable_debug}" = "yes" ; then - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" - fi - else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" - elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" - fi - fi - - CFLAGS="${ac_save_CFLAGS}" - CXXFLAGS="${ac_save_CXXFLAGS}" - - - echo "$ac_t""done" 1>&6 +SUBDIRS="infra libcdl tools/configtool/standalone/common" - -if test "${cygflags_enable_debug}" = "yes" ; then - cyginfra_asserts=yes - cyginfra_preconditions=yes - cyginfra_postconditions=yes - cyginfra_invariants=yes - cyginfra_loopinvariants=yes - cyginfra_tracing=yes - cyginfra_fntracing=yes -else - cyginfra_asserts=no - cyginfra_preconditions=no - cyginfra_postconditions=no - cyginfra_invariants=no - cyginfra_loopinvariants=no - cyginfra_tracing=no - cyginfra_fntracing=no -fi - -# Check whether --enable-asserts or --disable-asserts was given. -if test "${enable_asserts+set}" = set; then - enableval="$enable_asserts" - case "${enableval}" in - yes) cyginfra_asserts=yes ;; - no) cyginfra_asserts=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-asserts option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_asserts}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_USE_ASSERTS 1 -EOF - -fi - -# Check whether --enable-preconditions or --disable-preconditions was given. -if test "${enable_preconditions+set}" = set; then - enableval="$enable_preconditions" - case "${enableval}" in - yes) cyginfra_preconditions=yes ;; - no) cyginfra_preconditions=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-preconditions option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_preconditions}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_INFRA_DEBUG_PRECONDITIONS 1 -EOF - -fi - -# Check whether --enable-postconditions or --disable-postconditions was given. -if test "${enable_postconditions+set}" = set; then - enableval="$enable_postconditions" - case "${enableval}" in - yes) cyginfra_postconditions=yes ;; - no) cyginfra_postconditions=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-postconditions option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_postconditions}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_INFRA_DEBUG_POSTCONDITIONS 1 -EOF - -fi - -# Check whether --enable-invariants or --disable-invariants was given. -if test "${enable_invariants+set}" = set; then - enableval="$enable_invariants" - case "${enableval}" in - yes) cyginfra_invariants=yes ;; - no) cyginfra_invariants=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-invariants option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_invariants}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_INFRA_DEBUG_INVARIANTS 1 -EOF - -fi - -# Check whether --enable-loopinvariants or --disable-loopinvariants was given. -if test "${enable_loopinvariants+set}" = set; then - enableval="$enable_loopinvariants" - case "${enableval}" in - yes) cyginfra_loopinvariants=yes ;; - no) cyginfra_loopinvariants=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-loopinvariants option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_loopinvariants}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS 1 -EOF - -fi - -# Check whether --enable-tracing or --disable-tracing was given. -if test "${enable_tracing+set}" = set; then - enableval="$enable_tracing" - case "${enableval}" in - yes) cyginfra_tracing=yes ;; - no) cyginfra_tracing=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-tracing option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_tracing}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_USE_TRACING 1 -EOF - -fi - -# Check whether --enable-fntracing or --disable-fntracing was given. -if test "${enable_fntracing+set}" = set; then - enableval="$enable_fntracing" - case "${enableval}" in - yes) cyginfra_fntracing=yes ;; - no) cyginfra_fntracing=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-fntracing option" 1>&2; exit 1; } ;; -esac -fi - -if test "${cyginfra_fntracing}" = "yes"; then - cat >> confdefs.h <<\EOF -#define CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS 1 -EOF - -fi - - - - - - - - - -echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 -echo "configure:1602: checking for Tcl version" >&5 -# Check whether --with-tcl-version or --without-tcl-version was given. -if test "${with_tcl_version+set}" = set; then - withval="$with_tcl_version" - - cyg_ac_tcl_version=${with_tcl_version} - -else - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi - -fi - -echo "$ac_t""${cyg_ac_tcl_version}" 1>&6 - - - -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : -fi - -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : -fi - -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : -fi - - -echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 -echo "configure:1647: checking for Tcl installation" >&5 - - -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" -else - tcl_incdirs="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl$cyg_ac_tcl_version /usr/include" - -cyg_ac_tcl_incdir=NO -for i in $tcl_incdirs; -do - for j in tcl.h; - do - if test -r "$i/$j"; then - cyg_ac_tcl_incdir=$i - break 2 - fi - done -done - - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - -cyg_ac_tcl_libdir=NO -for i in $tcl_libdirs; -do - for j in tclConfig.sh; - do - if test -r "$i/$j"; then - cyg_ac_tcl_libdir=$i - break 2 - fi - done -done - - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } -fi - -if test "${MSVC}" = "yes" ; then - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_incdir=`cygpath -w ${cyg_ac_tcl_incdir} | tr \\\\\\\\ /` - fi - - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_libdir=`cygpath -w ${cyg_ac_tcl_libdir} | tr \\\\\\\\ /` - fi - -fi - -echo "$ac_t""${cyg_ac_tcl_libdir}" 1>&6 - - - - - - - -ECOS_DIRS="infra libcdl" - - - -if test -d ${srcdir}/tools/configtool/standalone/common; then - ECOS_DIRS="${ECOS_DIRS} tools/configtool/standalone/common" - -fi - - -subdirs="${ECOS_DIRS}" +subdirs="${SUBDIRS}" trap '' 1 2 15 cat > confcache <<\EOF @@ -1910,20 +1005,7 @@ s%@SET_MAKE@%$SET_MAKE%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g -s%@CC@%$CC%g -s%@CXX@%$CXX%g -s%@OBJEXT@%$OBJEXT%g -s%@EXEEXT@%$EXEEXT%g -s%@MSVC_TRUE@%$MSVC_TRUE%g -s%@MSVC_FALSE@%$MSVC_FALSE%g -s%@cyg_CFLAGS@%$cyg_CFLAGS%g -s%@cyg_CXXFLAGS@%$cyg_CXXFLAGS%g -s%@cyg_ac_tcl_version@%$cyg_ac_tcl_version%g -s%@cyg_ac_tcl_incdir@%$cyg_ac_tcl_incdir%g -s%@cyg_ac_tcl_libdir@%$cyg_ac_tcl_libdir%g -s%@cyg_ac_tcl_libs@%$cyg_ac_tcl_libs%g -s%@cyg_ac_tk_libs@%$cyg_ac_tk_libs%g -s%@ECOS_DIRS@%$ECOS_DIRS%g +s%@SUBDIRS@%$SUBDIRS%g s%@subdirs@%$subdirs%g CEOF @@ -2036,7 +1118,7 @@ cat >> $CONFIG_STATUS <<\EOF test -d tools/configtool || mkdir tools/configtool test -d tools/configtool/standalone || mkdir tools/configtool/standalone test -d tools/configtool/standalone/common || mkdir tools/configtool/standalone/common - + exit 0 EOF @@ -2069,7 +1151,7 @@ if test "$no_recursion" != yes; then esac done - for ac_config_dir in ${ECOS_DIRS}; do + for ac_config_dir in ${SUBDIRS}; do # Do not complain, so a configure script can configure whichever # parts of a large source tree are present. diff --git a/host/configure.in b/host/configure.in --- a/host/configure.in +++ b/host/configure.in @@ -6,9 +6,9 @@ dnl dnl Top-level configure script for eCos host-side software. dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- +dnl Copyright (C) 2002 Bart Veer dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. @@ -28,8 +28,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -41,67 +40,29 @@ dnl dnl####DESCRIPTIONEND#### dnl ==================================================================== -AC_INIT(config.guess) +dnl Generic initialization +AC_INIT(../acsupport/config.guess) +AC_CONFIG_AUX_DIR(../acsupport) AC_CANONICAL_HOST AM_INIT_AUTOMAKE(eCos,2.0,0) AM_MAINTAINER_MODE - -dnl Some of the decisions made depend on the compiler that is being used, -dnl so the usual set of compiler-related macros is needed here. -AC_PROG_MAKE_SET -AC_CYGWIN -AC_PROG_CC -AC_PROG_CXX -AC_OBJEXT -AC_EXEEXT -CYG_AC_PROG_MSVC - -dnl Allow the usual assertion and trace related options. -CYG_AC_ARG_INFRASTRUCTURE - -dnl What version of Tcl should be used? -CYG_AC_PATH_TCL - -dnl Some of the packages are compulsory and do not depend on the compiler -dnl that is being used. Other packages are only applicable to specific -dnl compilers, and in addition it should be possible to enable or -dnl disable them as convenient. -dnl -dnl The host-side infrastructure and libcdl are always needed. -ECOS_DIRS="infra libcdl" +ECOS_CHECK_BUILD_ne_SRC -dnl -------------------------------------------------------------------- -dnl Add any other directories that are autoconfiscated and present +dnl Nothing actually gets built in this directory, so there is no +dnl point in worrying about compiler flags etc. Instead just +dnl recurse into appropriate subdirectories. The current directory +dnl tree is rather deep, so to avoid having to create lots of intermediate +dnl configure scripts and associated files the required build tree +dnl subdirectories are created here. +SUBDIRS="infra libcdl tools/configtool/standalone/common" -dnl ---- Delete the dnl column below to configure ser_filter on Linux ---- -dnl if test -f ${srcdir}/tools/Utils/common/configure; then -dnl ECOS_DIRS="${ECOS_DIRS} tools/Utils/common" -dnl AC_OUTPUT_COMMANDS([ -dnl test -d tools || mkdir tools -dnl test -d tools/Utils || mkdir tools/Utils -dnl test -d tools/Utils/common || mkdir tools/Utils/common -dnl ]) -dnl fi -dnl -dnl if test -f ${srcdir}/tools/ecostest/common/configure; then -dnl ECOS_DIRS="${ECOS_DIRS} tools/ecostest/common" -dnl AC_OUTPUT_COMMANDS([ -dnl test -d tools || mkdir tools -dnl test -d tools/ecostest || mkdir tools/ecostest -dnl test -d tools/ecostest/common || mkdir tools/ecostest/common -dnl ]) -dnl fi - -if test -d ${srcdir}/tools/configtool/standalone/common; then - ECOS_DIRS="${ECOS_DIRS} tools/configtool/standalone/common" - AC_OUTPUT_COMMANDS([ +AC_OUTPUT_COMMANDS([ test -d tools || mkdir tools test -d tools/configtool || mkdir tools/configtool test -d tools/configtool/standalone || mkdir tools/configtool/standalone test -d tools/configtool/standalone/common || mkdir tools/configtool/standalone/common - ]) -fi +]) -AC_SUBST(ECOS_DIRS) -AC_CONFIG_SUBDIRS(${ECOS_DIRS}) +AC_SUBST(SUBDIRS) +AC_CONFIG_SUBDIRS(${SUBDIRS}) AC_OUTPUT(Makefile) diff --git a/host/infra/ChangeLog b/host/infra/ChangeLog --- a/host/infra/ChangeLog +++ b/host/infra/ChangeLog @@ -1,3 +1,14 @@ +2002-08-03 Bart Veer + + * acinclude.m4, configure.in, Makefile.am, testsuite/Makefile.am: + Rework host-side autoconf support + + * hosttest.exp: allow for configury changes + + * assert.cxx: use mkstemp() when available + + * cyg_trac.h, trace.cxx: use const where appropriate + 2001-05-16 Bart Veer * Makefile.am: use new compiler flag support diff --git a/host/infra/Makefile.am b/host/infra/Makefile.am --- a/host/infra/Makefile.am +++ b/host/infra/Makefile.am @@ -6,30 +6,29 @@ ## Host side implementation of the eCos infrastructure ## ## ===================================================================== -######COPYRIGHTBEGIN#### -## +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### ## ---------------------------------------------------------------------------- -## Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. -## -## This file is part of the eCos host tools. -## -## This program is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the Free -## Software Foundation; either version 2 of the License, or (at your option) -## any later version. -## -## This program is distributed in the hope that it will be useful, but WITHOUT -## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -## more details. -## -## You should have received a copy of the GNU General Public License along with -## this program; if not, write to the Free Software Foundation, Inc., -## 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# ## ---------------------------------------------------------------------------- -## -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -41,7 +40,7 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus +AUTOMAKE_OPTIONS = 1.3 foreign SUBDIRS = testsuite ## The generated makefile is responsible for the following: @@ -75,8 +74,10 @@ libcyginfra_a_SOURCES = assert.cxx \ testcase.cxx ## Pick up compiler flags etc. from configury -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ +INCLUDES = @ecos_INCLUDES@ +LIBS = @ecos_LIBS@ @ecos_LDADD@ +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ if MSVC all-local: cyginfra.lib @@ -112,8 +113,7 @@ copies = cyg/infra/cyg_type.h \ cyg/infra/testcase.h \ cyg/hal/basetype.h \ pkgconf/infra.h \ - pkgconf/hostinfra.h \ - hosttest.exp + pkgconf/hostinfra.h ## The headers are not installed as part of the default install ## target, instead a data hook is used. This avoids problems when the @@ -176,11 +176,6 @@ cyg/hal/basetype.h : basetype.h $(INSTALL_DATA) $(<) $(@) ## ---------------------------------------------------------------------------- -## Add a rule for exporting hosttest.exp -dejagnudir = $(prefix)/share/dejagnu -dejagnu_DATA = hosttest.exp - -## ---------------------------------------------------------------------------- ## Add specific dependencies for all source files assert.$(OBJEXT) : Makefile \ diff --git a/host/infra/Makefile.in b/host/infra/Makefile.in --- a/host/infra/Makefile.in +++ b/host/infra/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,8 +10,27 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -######COPYRIGHTBEGIN#### -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -66,42 +85,58 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ RANLIB = @RANLIB@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus +AUTOMAKE_OPTIONS = 1.3 foreign SUBDIRS = testsuite noinst_LIBRARIES = libcyginfra.a -libcyginfra_a_SOURCES = assert.cxx trace.cxx checkdata.cxx testcase.cxx +libcyginfra_a_SOURCES = assert.cxx \ + trace.cxx \ + checkdata.cxx \ + testcase.cxx -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ +INCLUDES = @ecos_INCLUDES@ +LIBS = @ecos_LIBS@ @ecos_LDADD@ +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ -copies = cyg/infra/cyg_type.h cyg/infra/cyg_ass.h cyg/infra/cyg_trac.h cyg/infra/testcase.h cyg/hal/basetype.h pkgconf/infra.h pkgconf/hostinfra.h hosttest.exp +copies = cyg/infra/cyg_type.h \ + cyg/infra/cyg_ass.h \ + cyg/infra/cyg_trac.h \ + cyg/infra/testcase.h \ + cyg/hal/basetype.h \ + pkgconf/infra.h \ + pkgconf/hostinfra.h noinst_HEADERS = $(copies) CLEANFILES = $(copies) - -dejagnudir = $(prefix)/share/dejagnu -dejagnu_DATA = hosttest.exp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/../../acsupport/mkinstalldirs CONFIG_HEADER = hostinfra.h CONFIG_CLEAN_FILES = LIBRARIES = $(noinst_LIBRARIES) @@ -110,7 +145,6 @@ LIBRARIES = $(noinst_LIBRARIES) DEFS = @DEFS@ -I. -I$(srcdir) -I. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ libcyginfra_a_LIBADD = libcyginfra_a_OBJECTS = assert.$(OBJEXT) trace.$(OBJEXT) \ checkdata.$(OBJEXT) testcase.$(OBJEXT) @@ -119,8 +153,6 @@ CXXFLAGS = @CXXFLAGS@ CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ -DATA = $(dejagnu_DATA) - HEADERS = $(noinst_HEADERS) DIST_COMMON = ./stamp-h.in ChangeLog Makefile.am Makefile.in acconfig.h \ @@ -131,6 +163,8 @@ DISTFILES = $(DIST_COMMON) $(SOURCES) $( TAR = gtar GZIP_ENV = --best +DEP_FILES = .deps/assert.P .deps/checkdata.P .deps/testcase.P \ +.deps/trace.P SOURCES = $(libcyginfra_a_SOURCES) OBJECTS = $(libcyginfra_a_OBJECTS) @@ -138,9 +172,9 @@ all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .cxx .o .obj .s $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -189,9 +223,6 @@ distclean-noinstLIBRARIES: maintainer-clean-noinstLIBRARIES: -.c.o: - $(COMPILE) -c $< - # FIXME: We should only use cygpath when building on Windows, # and only if it is available. .c.obj: @@ -223,25 +254,6 @@ libcyginfra.a: $(libcyginfra_a_OBJECTS) .cxx.obj: $(CXXCOMPILE) -c `cygpath -w $<` -install-dejagnuDATA: $(dejagnu_DATA) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(dejagnudir) - @list='$(dejagnu_DATA)'; for p in $$list; do \ - if test -f $(srcdir)/$$p; then \ - echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(dejagnudir)/$$p"; \ - $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(dejagnudir)/$$p; \ - else if test -f $$p; then \ - echo " $(INSTALL_DATA) $$p $(DESTDIR)$(dejagnudir)/$$p"; \ - $(INSTALL_DATA) $$p $(DESTDIR)$(dejagnudir)/$$p; \ - fi; fi; \ - done - -uninstall-dejagnuDATA: - @$(NORMAL_UNINSTALL) - list='$(dejagnu_DATA)'; for p in $$list; do \ - rm -f $(DESTDIR)$(dejagnudir)/$$p; \ - done - # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, @@ -252,7 +264,7 @@ uninstall-dejagnuDATA: @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ @@ -278,7 +290,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ @@ -369,8 +381,13 @@ distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ @@ -389,37 +406,85 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cxx + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cxx + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp info-am: info: info-recursive dvi-am: dvi: dvi-recursive -check-am: +check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive -install-info-am: -install-info: install-info-recursive all-recursive-am: hostinfra.h $(MAKE) $(AM_MAKEFLAGS) all-recursive install-exec-am: install-exec-local install-exec: install-exec-recursive -install-data-am: install-dejagnuDATA install-data-local +install-data-am: install-data-local install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive -uninstall-am: uninstall-dejagnuDATA +uninstall-am: uninstall: uninstall-recursive -all-am: Makefile $(LIBRARIES) $(DATA) $(HEADERS) hostinfra.h all-local +all-am: Makefile $(LIBRARIES) $(HEADERS) hostinfra.h all-local all-redirect: all-recursive-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(dejagnudir) mostlyclean-generic: @@ -433,18 +498,19 @@ distclean-generic: maintainer-clean-generic: mostlyclean-am: mostlyclean-hdr mostlyclean-noinstLIBRARIES \ - mostlyclean-compile mostlyclean-tags \ + mostlyclean-compile mostlyclean-tags mostlyclean-depend \ mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-noinstLIBRARIES clean-compile clean-tags \ - clean-generic mostlyclean-am clean-local + clean-depend clean-generic mostlyclean-am clean-local clean: clean-recursive distclean-am: distclean-hdr distclean-noinstLIBRARIES distclean-compile \ - distclean-tags distclean-generic clean-am + distclean-tags distclean-depend distclean-generic \ + clean-am distclean: distclean-recursive -rm -f config.status @@ -452,7 +518,8 @@ distclean: distclean-recursive maintainer-clean-am: maintainer-clean-hdr \ maintainer-clean-noinstLIBRARIES \ maintainer-clean-compile maintainer-clean-tags \ - maintainer-clean-generic distclean-am + maintainer-clean-depend maintainer-clean-generic \ + distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." @@ -463,20 +530,21 @@ maintainer-clean: maintainer-clean-recur mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile uninstall-dejagnuDATA install-dejagnuDATA \ -install-data-recursive uninstall-data-recursive install-exec-recursive \ +maintainer-clean-compile install-data-recursive \ +uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ -distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info all-recursive-am install-exec-local install-exec-am \ -install-exec install-data-local install-data-am install-data install-am \ -install uninstall-am uninstall all-local all-redirect all-am all \ -installdirs-am installdirs mostlyclean-generic distclean-generic \ -clean-generic maintainer-clean-generic clean mostlyclean distclean \ -maintainer-clean +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck all-recursive-am install-exec-local \ +install-exec-am install-exec install-data-local install-data-am \ +install-data install-am install uninstall-am uninstall all-local \ +all-redirect all-am all installdirs-am installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean @MSVC_TRUE@all-local: cyginfra.lib diff --git a/host/infra/acinclude.m4 b/host/infra/acinclude.m4 --- a/host/infra/acinclude.m4 +++ b/host/infra/acinclude.m4 @@ -7,10 +7,10 @@ dnl dnl Host side implementation of the eCos infrastructure. dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -29,8 +29,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -45,92 +44,4 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../acinclude.m4) - - -dnl ==================================================================== -dnl Look for a 64 bit data type. It is necessary to check both C and C++ -dnl compilers. -dnl -dnl A better implementation would check whether or not AC_PROG_CC and -dnl AC_PROG_CXX have been invoked and only test the appropriate -dnl compiler. -dnl -dnl When cross-compiling, default to long long on the assumption that -dnl gcc/g++ must be used and long long is likely to be the 64 bit data -dnl type. This is not guaranteed, but sufficiently likely to meet -dnl the requirements for the time being. The CHECK_SIZEOF() macro -dnl might be another way to get the desired information. - -AC_DEFUN(CYG_AC_TYPE_64bit, [ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_CACHE_CHECK("for a 64 bit data type",cyg_ac_cv_type_64bit,[ - for type in "long" "long long" "__int64"; do - AC_LANG_SAVE - AC_LANG_C - AC_TRY_RUN([ - main() { - return 8 != sizeof($type); - } - ],ctype_64bit=$type,ctype_64bit="unknown",ctype_64bit="long long") - AC_LANG_CPLUSPLUS - AC_TRY_RUN([ - int main(int argc, char ** argv) { - return 8 != sizeof($type); - } - ],cxxtype_64bit=$type,cxxtype_64bit="unknown",cxxtype_64bit="long long") - AC_LANG_RESTORE - if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then - cyg_ac_cv_type_64bit="${type}" - break - fi - done - ]) - if test "${cyg_ac_cv_type_64bit}" = ""; then - AC_MSG_ERROR(Unable to figure out how to do 64 bit arithmetic) - else - if test "${cyg_ac_cv_type_64bit}" != "long long"; then - AC_DEFINE_UNQUOTED(cyg_halint64,${cyg_ac_cv_type_64bit}) - AC_DEFINE_UNQUOTED(cyg_halcount64,${cyg_ac_cv_type_64bit}) - fi - fi -]) - -dnl ==================================================================== -dnl Check that both the C and C++ compilers support __PRETTY_FUNCTION__ - -AC_DEFUN(CYG_AC_C_PRETTY_FUNCTION,[ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_CACHE_CHECK("for __PRETTY_FUNCTION__ support",cyg_ac_cv_c_pretty_function,[ - AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK( - [#include ], - [puts(__PRETTY_FUNCTION__);], - c_ok="yes", - c_ok="no" - ) - AC_LANG_CPLUSPLUS - AC_TRY_LINK( - [#include ], - [puts(__PRETTY_FUNCTION__);], - cxx_ok="yes", - cxx_ok="no" - ) - AC_LANG_RESTORE - if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then - cyg_ac_cv_c_pretty_function="yes" - fi - ]) - if test "${cyg_ac_cv_c_pretty_function}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO) - fi -]) - - - - +sinclude(../../acsupport/acinclude.m4) diff --git a/host/infra/aclocal.m4 b/host/infra/aclocal.m4 --- a/host/infra/aclocal.m4 +++ b/host/infra/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -19,10 +19,10 @@ dnl dnl Host side implementation of the eCos infrastructure. dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -41,8 +41,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -57,99 +56,11 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../acinclude.m4) - - -dnl ==================================================================== -dnl Look for a 64 bit data type. It is necessary to check both C and C++ -dnl compilers. -dnl -dnl A better implementation would check whether or not AC_PROG_CC and -dnl AC_PROG_CXX have been invoked and only test the appropriate -dnl compiler. -dnl -dnl When cross-compiling, default to long long on the assumption that -dnl gcc/g++ must be used and long long is likely to be the 64 bit data -dnl type. This is not guaranteed, but sufficiently likely to meet -dnl the requirements for the time being. The CHECK_SIZEOF() macro -dnl might be another way to get the desired information. - -AC_DEFUN(CYG_AC_TYPE_64bit, [ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_CACHE_CHECK("for a 64 bit data type",cyg_ac_cv_type_64bit,[ - for type in "long" "long long" "__int64"; do - AC_LANG_SAVE - AC_LANG_C - AC_TRY_RUN([ - main() { - return 8 != sizeof($type); - } - ],ctype_64bit=$type,ctype_64bit="unknown",ctype_64bit="long long") - AC_LANG_CPLUSPLUS - AC_TRY_RUN([ - int main(int argc, char ** argv) { - return 8 != sizeof($type); - } - ],cxxtype_64bit=$type,cxxtype_64bit="unknown",cxxtype_64bit="long long") - AC_LANG_RESTORE - if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then - cyg_ac_cv_type_64bit="${type}" - break - fi - done - ]) - if test "${cyg_ac_cv_type_64bit}" = ""; then - AC_MSG_ERROR(Unable to figure out how to do 64 bit arithmetic) - else - if test "${cyg_ac_cv_type_64bit}" != "long long"; then - AC_DEFINE_UNQUOTED(cyg_halint64,${cyg_ac_cv_type_64bit}) - AC_DEFINE_UNQUOTED(cyg_halcount64,${cyg_ac_cv_type_64bit}) - fi - fi -]) - -dnl ==================================================================== -dnl Check that both the C and C++ compilers support __PRETTY_FUNCTION__ - -AC_DEFUN(CYG_AC_C_PRETTY_FUNCTION,[ - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_PROG_CXX]) - - AC_CACHE_CHECK("for __PRETTY_FUNCTION__ support",cyg_ac_cv_c_pretty_function,[ - AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK( - [#include ], - [puts(__PRETTY_FUNCTION__);], - c_ok="yes", - c_ok="no" - ) - AC_LANG_CPLUSPLUS - AC_TRY_LINK( - [#include ], - [puts(__PRETTY_FUNCTION__);], - cxx_ok="yes", - cxx_ok="no" - ) - AC_LANG_RESTORE - if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then - cyg_ac_cv_c_pretty_function="yes" - fi - ]) - if test "${cyg_ac_cv_c_pretty_function}" = "yes"; then - AC_DEFINE(CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO) - fi -]) - - - - +sinclude(../../acsupport/acinclude.m4) # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then @@ -169,7 +80,7 @@ fi]) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -197,7 +108,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -238,7 +149,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -257,7 +168,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, @@ -274,7 +185,7 @@ AC_DEFUN(AM_MAINTAINER_MODE, # Like AC_CONFIG_HEADER, but automatically create stamp file. -AC_DEFUN(AM_CONFIG_HEADER, +AC_DEFUN([AM_CONFIG_HEADER], [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. diff --git a/host/infra/assert.cxx b/host/infra/assert.cxx --- a/host/infra/assert.cxx +++ b/host/infra/assert.cxx @@ -10,7 +10,8 @@ //####COPYRIGHTBEGIN#### // // ---------------------------------------------------------------------------- -// Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +// Copyright (C) 2002 Bart Veer +// Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. // // This file is part of the eCos host tools. // @@ -163,11 +164,13 @@ cyg_assert_failure_invoke_callbacks( // subsequent attempts to output more data cause additional failures. It // is worthwhile detecting recursive assertion failures. // -// Assuming the table of callbacks is not empty it is possible to output -// some more data to a file. The tmpnam() function is used to get a filename. -// The file is opened and the callbacks are invoked. Three utilities have to -// be provided to do the real work, and a static is used to keep track of the -// FILE * pointer. +// Assuming the table of callbacks is not empty it is possible to +// output some more data to a file. If possible mkstemp() is used to +// create this file. If mkstemp() is not available then tmpnam() is +// used instead. That function has security problems, albeit not ones +// likely to affect dump files. Once the file is opened the callbacks +// are invoked. Three utilities have to be provided to do the real +// work, and a static is used to keep track of the FILE * pointer. // // The testcase tassert8, and in particular the associated Tcl proc // tassert8_filter in testsuite/cyginfra/assert.exp, has detailed @@ -241,6 +244,23 @@ default_handler(const char* fn, const ch // Only create a logfile if more information is available. if (0 != callbacks.size() ) { + + // Use mkstemp() if possible, but only when running on a platform where /tmp + // is likely to be available. +#if defined(HAVE_MKSTEMP) && !defined(_MSC_VER) + char filename[32]; + int fd; + strcpy(filename, "/tmp/ecosdump.XXXXXX"); + fd = mkstemp(filename); + if (-1 == fd) { + fprintf(stderr, "Unable to create a suitable output file for additional data.\n"); + } else { + default_handler_output_file = fdopen(fd, "w"); + if (0 == default_handler_output_file) { + close(fd); + } + } +#else char filename[L_tmpnam]; if (0 == tmpnam(filename)) { fprintf(stderr, "Unable to create a suitable output file for additional data.\n"); @@ -251,27 +271,28 @@ default_handler(const char* fn, const ch // The probability of a problem is considered to be too small // to worry about. default_handler_output_file = fopen(filename, "w"); - if (0 == default_handler_output_file) { - fprintf(stderr, "Unable to open output file %s\n", filename); - fputs("No further assertion information is available.\n", stderr); - } else { - fprintf(stderr, "Writing additional output to %s\n", filename); + } +#endif + if (0 == default_handler_output_file) { + fprintf(stderr, "Unable to open output file %s\n", filename); + fputs("No further assertion information is available.\n", stderr); + } else { + fprintf(stderr, "Writing additional output to %s\n", filename); - // Repeat the information about the assertion itself. - fprintf(default_handler_output_file, "Assertion failure: %s\n", msg); - fprintf(default_handler_output_file, "File %s, line number %lu\n", file, (unsigned long) lineno); - if (0 != fn) - fprintf(default_handler_output_file, "Function %s\n", fn); - fputs("\n", default_handler_output_file); + // Repeat the information about the assertion itself. + fprintf(default_handler_output_file, "Assertion failure: %s\n", msg); + fprintf(default_handler_output_file, "File %s, line number %lu\n", file, (unsigned long) lineno); + if (0 != fn) + fprintf(default_handler_output_file, "Function %s\n", fn); + fputs("\n", default_handler_output_file); - // Now for the various callbacks. - cyg_assert_failure_invoke_callbacks( &default_handler_first_fn, - &default_handler_second_fn, &default_handler_final_fn ); + // Now for the various callbacks. + cyg_assert_failure_invoke_callbacks( &default_handler_first_fn, + &default_handler_second_fn, &default_handler_final_fn ); - // And close the file. - fputs("\nEnd of assertion data.\n", default_handler_output_file); - fclose(default_handler_output_file); - } + // And close the file. + fputs("\nEnd of assertion data.\n", default_handler_output_file); + fclose(default_handler_output_file); } } fflush(stderr); diff --git a/host/infra/config.h.in b/host/infra/config.h.in --- a/host/infra/config.h.in +++ b/host/infra/config.h.in @@ -15,3 +15,6 @@ /* The number of bytes in a long. */ #undef SIZEOF_LONG + +/* Define if you have the mkstemp function. */ +#undef HAVE_MKSTEMP diff --git a/host/infra/configure b/host/infra/configure --- a/host/infra/configure +++ b/host/infra/configure @@ -15,17 +15,9 @@ ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help - --enable-debug do a debug rather than a release build" -ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" -ac_help="$ac_help - --with-tcl-version= version of Tcl to be used" + --enable-debug do a debug rather than a release build" ac_help="$ac_help - --with-tcl-header= location of Tcl header" -ac_help="$ac_help - --with-tcl-lib= location of Tcl libraries" -ac_help="$ac_help - --with-tcl= location of Tcl header and libraries" + --enable-ansi do an ANSI rather than a unicode build" ac_help="$ac_help --enable-tracebufsize=X size of the trace buffer" @@ -540,7 +532,7 @@ fi ac_aux_dir= -for ac_dir in .. $srcdir/..; do +for ac_dir in ../../acsupport $srcdir/../../acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -552,7 +544,7 @@ for ac_dir in .. $srcdir/..; do fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in ../../acsupport $srcdir/../../acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -560,13 +552,28 @@ ac_configure=$ac_aux_dir/configure # Thi + echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6 +echo "configure:557: checking that a separate build tree is being used" >&5 + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} + fi + if test "${ecos_cwd}" = "${srcdir}" ; then + echo "$ac_t""no" 1>&6 + { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; } + else + echo "$ac_t""yes" 1>&6 + fi + + + # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:570: checking host system type" >&5 +echo "configure:577: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -599,7 +606,7 @@ echo "$ac_t""$host" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:603: checking for a BSD compatible install" >&5 +echo "configure:610: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -652,7 +659,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:656: checking whether build environment is sane" >&5 +echo "configure:663: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -709,7 +716,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:713: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:720: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -748,7 +755,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:752: checking for working aclocal" >&5 +echo "configure:759: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -761,7 +768,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:765: checking for working autoconf" >&5 +echo "configure:772: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -774,7 +781,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:778: checking for working automake" >&5 +echo "configure:785: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -787,7 +794,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:791: checking for working autoheader" >&5 +echo "configure:798: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -800,7 +807,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:804: checking for working makeinfo" >&5 +echo "configure:811: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -822,7 +829,7 @@ EOF echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:826: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:833: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -845,37 +852,10 @@ fi -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:850: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:879: checking for $ac_word" >&5 +echo "configure:859: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -905,7 +885,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:909: checking for $ac_word" >&5 +echo "configure:889: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -956,7 +936,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:960: checking for $ac_word" >&5 +echo "configure:940: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -988,7 +968,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:992: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:972: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -999,12 +979,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1003 "configure" +#line 983 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1030,12 +1010,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1034: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1014: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1039: checking whether we are using GNU C" >&5 +echo "configure:1019: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1044,7 +1024,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1063,7 +1043,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1067: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1047: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1099,7 +1079,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1103: checking for $ac_word" >&5 +echo "configure:1083: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1131,7 +1111,7 @@ test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1135: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:1115: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1142,12 +1122,12 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext << EOF -#line 1146 "configure" +#line 1126 "configure" #include "confdefs.h" int main(){return(0);} EOF -if { (eval echo configure:1151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1173,12 +1153,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1177: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1157: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1182: checking whether we are using GNU C++" >&5 +echo "configure:1162: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1187,7 +1167,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1171: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1206,7 +1186,7 @@ ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1210: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1190: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1237,10 +1217,61 @@ else fi fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat > conftest.$ac_ext < +$ac_declaration +int main() { +exit (42); +; return 0; } +EOF +if { (eval echo configure:1239: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + continue +fi +rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1244: checking for $ac_word" >&5 +echo "configure:1275: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1268,13 +1299,13 @@ else fi echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1272: checking for object suffix" >&5 +echo "configure:1303: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1292,12 +1323,12 @@ OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1296: checking for Cygwin environment" >&5 +echo "configure:1327: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1343: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1325,19 +1356,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1329: checking for mingw32 environment" >&5 +echo "configure:1360: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1372: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1356,7 +1387,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=y echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1360: checking for executable suffix" >&5 +echo "configure:1391: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1366,7 +1397,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; @@ -1387,17 +1418,39 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT + ecos_CFLAGS="" + ecos_CXXFLAGS="" + ecos_LDADD="" + ecos_INCLUDES="" + ecos_LIBS="" + + + + + + + + echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1395: checking "for Visual C++"" >&5 +echo "configure:1439: checking "for Visual C++"" >&5 MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" + CXX="cl" + + + + if test "${MSVC}" = "yes" ; then + MSVC_SRCDIR=`cygpath -w ${MSVC_SRCDIR} | tr \\\\\\\\ /` fi - if test "${CXX}" = "cl" ; then - MSVC="yes" + + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${msvc_srcdir}\"" + ecos_LDADD="-link" + ecos_LIBS="advapi32.lib" fi @@ -1408,84 +1461,88 @@ else MSVC_TRUE='#' MSVC_FALSE= fi - echo "$ac_t""${MSVC}" 1>&6 + if test "${MSVC}" = "yes" ; then + echo "$ac_t""unfortunately yes" 1>&6 + else + echo "$ac_t""no" 1>&6 + fi + echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1420: checking "the default compiler flags"" >&5 +echo "configure:1478: checking "the default compiler flags"" >&5 - cygflags_enable_debug="no" + ecosflags_enable_debug="no" # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; + yes) ecosflags_enable_debug="yes" ;; + *) ecosflags_enable_debug="no" ;; esac fi - cygflags_enable_ansi="no" + ecosflags_enable_ansi="no" if test "${MSVC}" = "yes" ; then # Check whether --enable-ansi or --disable-ansi was given. if test "${enable_ansi+set}" = set; then enableval="$enable_ansi" case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; + yes) ecosflags_enable_ansi="yes" ;; + *) ecosflags_enable_ansi="no" ;; esac fi fi if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" + ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" + ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" else { echo "configure: error: "default flags for ${CC} are not known"" 1>&2; exit 1; } fi - if test "${cygflags_enable_debug}" = "yes" ; then + if test "${ecosflags_enable_debug}" = "yes" ; then if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" + ecos_CFLAGS="${ecos_CFLAGS} -g -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" + ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" fi else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" + ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" fi fi CFLAGS="${ac_save_CFLAGS}" CXXFLAGS="${ac_save_CXXFLAGS}" - - + echo "$ac_t""done" 1>&6 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:1482: checking whether byte ordering is bigendian" >&5 +echo "configure:1539: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include @@ -1496,11 +1553,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:1500: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include @@ -1511,7 +1568,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:1515: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -1531,7 +1588,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -1573,14 +1630,14 @@ fi echo $ac_n "checking "for a 64 bit data type"""... $ac_c" 1>&6 -echo "configure:1577: checking "for a 64 bit data type"" >&5 -if eval "test \"`echo '$''{'cyg_ac_cv_type_64bit'+set}'`\" = set"; then +echo "configure:1634: checking "for a 64 bit data type"" >&5 +if eval "test \"`echo '$''{'ecos_cv_type_64bit'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else for type in "long" "long long" "__int64"; do - ac_ext=c + ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' @@ -1591,15 +1648,15 @@ cross_compiling=$ac_cv_prog_cc_cross ctype_64bit="long long" else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ctype_64bit=$type else @@ -1611,7 +1668,7 @@ fi rm -fr conftest* fi - ac_ext=C + ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' @@ -1622,18 +1679,15 @@ cross_compiling=$ac_cv_prog_cxx_cross cxxtype_64bit="long long" else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then cxxtype_64bit=$type else @@ -1645,7 +1699,7 @@ fi rm -fr conftest* fi - ac_ext=c + ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' @@ -1653,24 +1707,24 @@ ac_link='${CC-cc} -o conftest${ac_exeext cross_compiling=$ac_cv_prog_cc_cross if test "${ctype_64bit}" = "${type}" -a "${cxxtype_64bit}" = "${type}"; then - cyg_ac_cv_type_64bit="${type}" + ecos_cv_type_64bit="${type}" break fi done fi -echo "$ac_t""$cyg_ac_cv_type_64bit" 1>&6 - if test "${cyg_ac_cv_type_64bit}" = ""; then +echo "$ac_t""$ecos_cv_type_64bit" 1>&6 + if test "${ecos_cv_type_64bit}" = ""; then { echo "configure: error: Unable to figure out how to do 64 bit arithmetic" 1>&2; exit 1; } else - if test "${cyg_ac_cv_type_64bit}" != "long long"; then + if test "${ecos_cv_type_64bit}" != "long long"; then cat >> confdefs.h <> confdefs.h <&6 -echo "configure:1682: checking size of int *" >&5 +echo "configure:1736: checking size of int *" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1686,18 +1740,18 @@ else { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext < -main() +int main() { FILE *f=fopen("conftestval", "w"); - if (!f) exit(1); + if (!f) return(1); fprintf(f, "%d\n", sizeof(int *)); - exit(0); + return(0); } EOF -if { (eval echo configure:1701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_int_p=`cat conftestval` else @@ -1717,7 +1771,7 @@ EOF echo $ac_n "checking size of long""... $ac_c" 1>&6 -echo "configure:1721: checking size of long" >&5 +echo "configure:1775: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1725,18 +1779,18 @@ else { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext < -main() +int main() { FILE *f=fopen("conftestval", "w"); - if (!f) exit(1); + if (!f) return(1); fprintf(f, "%d\n", sizeof(long)); - exit(0); + return(0); } EOF -if { (eval echo configure:1740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else @@ -1761,8 +1815,8 @@ EOF echo $ac_n "checking "for __PRETTY_FUNCTION__ support"""... $ac_c" 1>&6 -echo "configure:1765: checking "for __PRETTY_FUNCTION__ support"" >&5 -if eval "test \"`echo '$''{'cyg_ac_cv_c_pretty_function'+set}'`\" = set"; then +echo "configure:1819: checking "for __PRETTY_FUNCTION__ support"" >&5 +if eval "test \"`echo '$''{'ecos_cv_c_pretty_function'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1775,14 +1829,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext < int main() { puts(__PRETTY_FUNCTION__); ; return 0; } EOF -if { (eval echo configure:1786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* c_ok="yes" else @@ -1801,14 +1855,14 @@ ac_link='${CXX-g++} -o conftest${ac_exee cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext < int main() { puts(__PRETTY_FUNCTION__); ; return 0; } EOF -if { (eval echo configure:1812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1866: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* cxx_ok="yes" else @@ -1827,13 +1881,13 @@ ac_link='${CC-cc} -o conftest${ac_exeext cross_compiling=$ac_cv_prog_cc_cross if test "${c_ok}" = "yes" -a "${cxx_ok}" = "yes"; then - cyg_ac_cv_c_pretty_function="yes" + ecos_cv_c_pretty_function="yes" fi fi -echo "$ac_t""$cyg_ac_cv_c_pretty_function" 1>&6 - if test "${cyg_ac_cv_c_pretty_function}" = "yes"; then +echo "$ac_t""$ecos_cv_c_pretty_function" 1>&6 + if test "${ecos_cv_c_pretty_function}" = "yes"; then cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO 1 EOF @@ -1841,148 +1895,61 @@ EOF fi - - - - - - -echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 -echo "configure:1852: checking for Tcl version" >&5 -# Check whether --with-tcl-version or --without-tcl-version was given. -if test "${with_tcl_version+set}" = set; then - withval="$with_tcl_version" - - cyg_ac_tcl_version=${with_tcl_version} - +for ac_func in mkstemp +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1902: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); -fi - -echo "$ac_t""${cyg_ac_tcl_version}" 1>&6 - - +int main() { -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : -fi +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : +; return 0; } +EOF +if { (eval echo configure:1930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" fi - -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - : +rm -f conftest* fi - -echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 -echo "configure:1897: checking for Tcl installation" >&5 - - -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi done - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - -cyg_ac_tcl_libdir=NO -for i in $tcl_libdirs; -do - for j in tclConfig.sh; - do - if test -r "$i/$j"; then - cyg_ac_tcl_libdir=$i - break 2 - fi - done -done - - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } -fi - -if test "${MSVC}" = "yes" ; then - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_incdir=`cygpath -w ${cyg_ac_tcl_incdir} | tr \\\\\\\\ /` - fi - - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_libdir=`cygpath -w ${cyg_ac_tcl_libdir} | tr \\\\\\\\ /` - fi - -fi - -echo "$ac_t""${cyg_ac_tcl_libdir}" 1>&6 - - - - - - # Check whether --enable-tracebufsize or --disable-tracebufsize was given. @@ -2162,15 +2129,14 @@ s%@CXX@%$CXX%g s%@RANLIB@%$RANLIB%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g +s%@ecos_CFLAGS@%$ecos_CFLAGS%g +s%@ecos_CXXFLAGS@%$ecos_CXXFLAGS%g +s%@ecos_LDADD@%$ecos_LDADD%g +s%@ecos_INCLUDES@%$ecos_INCLUDES%g +s%@ecos_LIBS@%$ecos_LIBS%g +s%@MSVC_SRCDIR@%$MSVC_SRCDIR%g s%@MSVC_TRUE@%$MSVC_TRUE%g s%@MSVC_FALSE@%$MSVC_FALSE%g -s%@cyg_CFLAGS@%$cyg_CFLAGS%g -s%@cyg_CXXFLAGS@%$cyg_CXXFLAGS%g -s%@cyg_ac_tcl_version@%$cyg_ac_tcl_version%g -s%@cyg_ac_tcl_incdir@%$cyg_ac_tcl_incdir%g -s%@cyg_ac_tcl_libdir@%$cyg_ac_tcl_libdir%g -s%@cyg_ac_tcl_libs@%$cyg_ac_tcl_libs%g -s%@cyg_ac_tk_libs@%$cyg_ac_tk_libs%g CEOF EOF @@ -2392,4 +2358,3 @@ chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/host/infra/configure.in b/host/infra/configure.in --- a/host/infra/configure.in +++ b/host/infra/configure.in @@ -6,10 +6,10 @@ dnl dnl Host side implementation of the eCos infrastructure. dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -28,8 +28,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -44,38 +43,39 @@ dnl ==================================== dnl No infrastructure is complete without assertions. AC_INIT(assert.cxx) -dnl Pick up the support files from the top-level of the host source tree -AC_CONFIG_AUX_DIR(..) +dnl Pick up the support files from the top-level acsupport directory. +AC_CONFIG_AUX_DIR(../../acsupport) + +ECOS_CHECK_BUILD_ne_SRC dnl Other standard options. AC_CANONICAL_HOST -dnl This package is called cyginfra. Hopefully this will not clash -dnl with any other Red Hat packages. The generated header file may -dnl get #include'd indirectly by other packages, so it is not a -dnl good idea to define package and version. +dnl This package is called cyginfra, partly for historical reasons +dnl and partly to avoid reorganizing the testsuite subdirectory. +dnl The generated header file may get #include'd indirectly by other +dnl packages, so it is not a good idea to define package and version. AM_INIT_AUTOMAKE(cyginfra, 0.1,0) -CYG_AC_SUBST_VERSION(CYGNUM_INFRA_VERSION) +ECOS_SUBST_VERSION(CYGNUM_INFRA_VERSION) AM_MAINTAINER_MODE dnl The package contains a library implemented in C++. It has to be dnl buildable under NT. Only a static version of the library is dnl of interest at the moment. -AC_PROG_MAKE_SET AC_PROG_CC AC_PROG_CXX AC_PROG_RANLIB AC_OBJEXT AC_EXEEXT -CYG_AC_PROG_MSVC -CYG_AC_PROG_STANDARD_COMPILER_FLAGS +ECOS_PROG_MSVC +ECOS_PROG_STANDARD_COMPILER_FLAGS dnl Work out the endianness. The standard macro for this is used dnl even though it will give warnings at autoconf time. AC_C_BIGENDIAN dnl Work out a suitable datatype for 64 bit arithmetic. -CYG_AC_TYPE_64bit +ECOS_TYPE_64bit dnl Check the sizes of the pointer and long data types, so that dnl CYG_ADDRWORD can be defined correctly. @@ -83,10 +83,11 @@ AC_CHECK_SIZEOF(int *) AC_CHECK_SIZEOF(long) dnl See whether or not the compiler provides __PRETTY_FUNCTION__ -CYG_AC_C_PRETTY_FUNCTION +ECOS_C_PRETTY_FUNCTION -dnl What version of Tcl should be used? -CYG_AC_PATH_TCL +dnl What function should be used to create a temporary file? +dnl tmpnam() is deprecated for security reasons. +AC_CHECK_FUNCS(mkstemp) dnl -------------------------------------------------------------------- dnl User-settable options. Currently these are handled via --enable @@ -161,4 +162,3 @@ dnl hostinfra.h. AM_CONFIG_HEADER(hostinfra.h:config.h.in) AC_OUTPUT(Makefile:Makefile.in testsuite/Makefile:testsuite/Makefile.in) - diff --git a/host/infra/cyg_trac.h b/host/infra/cyg_trac.h --- a/host/infra/cyg_trac.h +++ b/host/infra/cyg_trac.h @@ -11,7 +11,8 @@ //####COPYRIGHTBEGIN#### // // ---------------------------------------------------------------------------- -// Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +// Copyright (C) 2002 Bart Veer +// Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. // // This file is part of the eCos host tools. // @@ -334,17 +335,17 @@ Internal Documentation The required functions which are used by the tracing macros are externC void - cyg_tracenomsg( char *psz_func, char *psz_file, cyg_uint32 linenum ); + cyg_tracenomsg( const char *psz_func, const char *psz_file, cyg_uint32 linenum ); externC void cyg_tracemsg( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg ); + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg ); externC void cyg_tracemsg2( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg, + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1 ); // extended in the obvious way for 4,6,8 arguments @@ -405,7 +406,7 @@ also fits in a byte as number or a bitse // these are executed to deal with tracing - breakpoint? externC void -cyg_tracenomsg( char *psz_func, char *psz_file, cyg_uint32 linenum ); +cyg_tracenomsg( const char *psz_func, const char *psz_file, cyg_uint32 linenum ); externC void cyg_trace_dump(void); @@ -438,31 +439,31 @@ enum cyg_trace_what{ externC void cyg_tracemsg( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg ); + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg ); externC void cyg_tracemsg2( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg, + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1 ); externC void cyg_tracemsg4( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg, + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3 ); externC void cyg_tracemsg6( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg, + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3, CYG_ADDRWORD arg4, CYG_ADDRWORD arg5 ); externC void cyg_tracemsg8( cyg_uint32 what, - char *psz_func, char *psz_file, cyg_uint32 linenum, - char *psz_msg, + const char *psz_func, const char *psz_file, cyg_uint32 linenum, + const char *psz_msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3, CYG_ADDRWORD arg4, CYG_ADDRWORD arg5, @@ -603,17 +604,17 @@ class Cyg_TraceFunction_Report_ { public: int cond; - char *func; - char *file; + const char *func; + const char *file; cyg_uint32 lnum; #ifdef CYGDBG_INFRA_DEBUG_TRACE_MESSAGE - char *exitmsg; + const char *exitmsg; CYG_ADDRWORD exitvalue; enum { UNSET = 0, SET, VOID } exitset; #endif Cyg_TraceFunction_Report_( - int condition, char *psz_func, char *psz_file, + int condition, const char *psz_func, const char *psz_file, cyg_uint32 linenum) { cond = condition; @@ -633,8 +634,8 @@ public: }; Cyg_TraceFunction_Report_( - int condition, char *psz_func, char *psz_file, - cyg_uint32 linenum, char *psz_exitmsg ) + int condition, const char *psz_func, const char *psz_file, + cyg_uint32 linenum, const char *psz_exitmsg ) { cond = condition; func = psz_func; @@ -646,7 +647,7 @@ public: if ( cond ) cyg_tracemsg( cyg_trace_enter, func, file, lnum, "enter"); #else - CYG_UNUSED_PARAM( char *, psz_exitmsg ); + CYG_UNUSED_PARAM( const char *, psz_exitmsg ); if ( cond ) cyg_tracenomsg( func, file, lnum ); #endif @@ -760,11 +761,11 @@ CYG_MACRO_END struct Cyg_TraceFunction_Report_ { int cond; - char *func; - char *file; /* not strictly needed in plain 'C' */ + const char *func; + const char *file; /* not strictly needed in plain 'C' */ cyg_uint32 lnum; /* nor this */ #ifdef CYGDBG_INFRA_DEBUG_TRACE_MESSAGE - char *exitmsg; + const char *exitmsg; CYG_ADDRWORD exitvalue; int exitset; #endif diff --git a/host/infra/hosttest.exp b/host/infra/hosttest.exp --- a/host/infra/hosttest.exp +++ b/host/infra/hosttest.exp @@ -8,7 +8,7 @@ ######COPYRIGHTBEGIN#### # # ---------------------------------------------------------------------------- -# Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # # This file is part of the eCos host tools. # @@ -65,6 +65,11 @@ # CFLAGS - flags to use when compiling C code # CXXFLAGS - flags to use when compiling C++ code # +# Some additional variables should be present in any generated +# makefiles in the eCos tree. +# INCLUDES - header file search path +# LIBS - libraries, search paths, ... +# # hosttest_initialize # Perform any initialization steps that are needed. Currently this # means reading in the Makefile from the top-level of the build tree @@ -116,7 +121,7 @@ proc hosttest_initialize { { pkg_vars {} set lines [split $contents "\n"] - foreach var [concat { CC CXX prefix OBJEXT EXEEXT VERSION CFLAGS CXXFLAGS } $pkg_vars] { + foreach var [concat { CC CXX prefix OBJEXT EXEEXT VERSION CFLAGS CXXFLAGS INCLUDES LIBS } $pkg_vars] { set pattern "^$var\[ \t\]*:?=\[ \t\]* (.*)\$" set dummy "" @@ -131,7 +136,7 @@ proc hosttest_initialize { { pkg_vars {} if { [info exists ::hosttest_data($var)] == 0 } { perror "Variable $var is not defined in $filename" exit 1 - } + } } # If compiling with VC++ remove any cygwin-isms from the prefix @@ -198,7 +203,7 @@ proc hosttest_extract_version { } { # verbose at level 2. Unsuccesful compiles or builts are reported using # level 1. -proc hosttest_compile { name sources incdirs libdirs libs } { +proc hosttest_compile { name sources includes libdirs libs } { # Make sure that the testcase directory does not yet exist, then # create it. This guarantees a clean system and reasonable access @@ -260,13 +265,15 @@ proc hosttest_compile { name sources inc } # Include path: start with the source tree. Then the build tree. + # Then the makefile's INCLUDES variable. # Then any additional directories specified explicitly by the # testcase. Finish off with the prefix. Note that header files # in the prefix directory may be out of date, depending on whether # or not there has been an install recently. append commandline "-I[file join [pwd] [file dirname $::srcdir]] " append commandline "-I[file join [pwd] [file dirname $::objdir]] " - foreach dir $incdirs { + append commandline "$::hosttest_data(INCLUDES) " + foreach dir $includes { append commandline "-I[file join [pwd] $dir] " } append commandline "-I[file join [pwd] $::hosttest_data(prefix) include] " @@ -323,7 +330,7 @@ proc hosttest_compile { name sources inc foreach lib $libs { append commandline "${lib}.lib " } - append commandline "-link " + append commandline "$::hosttest_data(LIBS) " append commandline "-libpath=[file join [pwd] [file dirname $::objdir]] " foreach dir $libdirs { append commandline "-libpath=[file join [pwd] $dir] " @@ -339,6 +346,7 @@ proc hosttest_compile { name sources inc foreach lib $libs { append commandline "-l$lib " } + append commandline "$::hosttest_data(LIBS) " } # We have a command line, go for it. diff --git a/host/infra/testsuite/Makefile.am b/host/infra/testsuite/Makefile.am --- a/host/infra/testsuite/Makefile.am +++ b/host/infra/testsuite/Makefile.am @@ -6,30 +6,28 @@ ## Host side implementation of the eCos infrastructure assertions. ## ## ===================================================================== -######COPYRIGHTBEGIN#### -## +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### ## ---------------------------------------------------------------------------- -## Copyright (C) 1998, 1999, 2000 Red Hat, Inc. -## -## This file is part of the eCos host tools. -## -## This program is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the Free -## Software Foundation; either version 2 of the License, or (at your option) -## any later version. -## -## This program is distributed in the hope that it will be useful, but WITHOUT -## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -## more details. -## -## You should have received a copy of the GNU General Public License along with -## this program; if not, write to the Free Software Foundation, Inc., -## 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## +# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# ## ---------------------------------------------------------------------------- -## -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -41,4 +39,4 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus dejagnu +AUTOMAKE_OPTIONS = 1.3 foreign dejagnu diff --git a/host/infra/testsuite/Makefile.in b/host/infra/testsuite/Makefile.in --- a/host/infra/testsuite/Makefile.in +++ b/host/infra/testsuite/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,8 +10,26 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -######COPYRIGHTBEGIN#### -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -66,23 +84,31 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ RANLIB = @RANLIB@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus dejagnu -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +AUTOMAKE_OPTIONS = 1.3 foreign dejagnu +mkinstalldirs = $(SHELL) $(top_srcdir)/../../acsupport/mkinstalldirs CONFIG_HEADER = ../hostinfra.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in @@ -92,14 +118,14 @@ DISTFILES = $(DIST_COMMON) $(SOURCES) $( TAR = gtar GZIP_ENV = --best -EXPECT = `if test -f $(top_builddir)/../expect/expect; then echo $(top_builddir)/../expect/expect; else echo expect; fi` -RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then echo $(top_srcdir)/../dejagnu/runtest; else echo runtest; fi` +EXPECT = expect +RUNTEST = runtest all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus testsuite/Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign testsuite/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -112,8 +138,13 @@ distdir = $(top_builddir)/$(PACKAGE)-$(V subdir = testsuite distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign testsuite/Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ @@ -132,10 +163,6 @@ RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) check-DEJAGNU: site.exp srcdir=`cd $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ - if [ -f $(top_builddir)/../expect/expect ]; then \ - TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \ - export TCL_LIBRARY; \ - fi; \ runtest=$(RUNTEST); \ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ $$runtest $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ @@ -160,13 +187,11 @@ info-am: info: info-am dvi-am: dvi: dvi-am -check-am: +check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check: check-am installcheck-am: installcheck: installcheck-am -install-info-am: -install-info: install-info-am install-exec-am: install-exec: install-exec-am @@ -213,11 +238,11 @@ maintainer-clean-am: maintainer-clean-g maintainer-clean: maintainer-clean-am .PHONY: tags distdir check-DEJAGNU info-am info dvi-am dvi check \ -check-am installcheck-am installcheck install-info-am install-info \ -install-exec-am install-exec install-data-am install-data install-am \ -install uninstall-am uninstall all-redirect all-am all installdirs \ -mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/host/infra/trace.cxx b/host/infra/trace.cxx --- a/host/infra/trace.cxx +++ b/host/infra/trace.cxx @@ -10,7 +10,8 @@ //####COPYRIGHTBEGIN#### // // ---------------------------------------------------------------------------- -// Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +// Copyright (C) 2002 Bart Veer +// Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. // // This file is part of the eCos host tools. // @@ -76,8 +77,8 @@ // ------------------------------------------------------------------------- // The tracing macros end up calling one of the following routines: // -// void cyg_tracenomsg(cyg_uint32 what, char* fn, char* file, cyg_uint32 line) -// void cyg_tracemsg( ..., char* msg) +// void cyg_tracenomsg(cyg_uint32 what, const char* fn, const char* file, cyg_uint32 line) +// void cyg_tracemsg( ..., const char* msg) // void cyg_tracemsg2( ..., CYG_ADDRWORD arg0, CYG_ADDRWORD arg1 ) // void cyg_tracemsg4( ..., CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, ... ) // void cyg_tracemsg6( ..., CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, ... ) @@ -130,9 +131,9 @@ typedef struct trace_entry { bool valid; cyg_uint32 what; cyg_uint32 line; - char* fn; - char* file; - char* msg; + const char* fn; + const char* file; + const char* msg; CYG_ADDRWORD data[8]; } trace_entry; @@ -171,7 +172,7 @@ static bool callback_installed = false; // vector in some other thread can work safely, but it may help a little bit. extern "C" void -cyg_tracenomsg(char* fn, char* file, cyg_uint32 line) +cyg_tracenomsg(const char* fn, const char* file, cyg_uint32 line) { int i = trace_index; tracevec[i].valid = false; @@ -199,7 +200,7 @@ cyg_tracenomsg(char* fn, char* file, cyg } extern "C" void -cyg_tracemsg(cyg_uint32 what, char* fn, char* file, cyg_uint32 line, char* msg) +cyg_tracemsg(cyg_uint32 what, const char* fn, const char* file, cyg_uint32 line, const char* msg) { int i = trace_index; tracevec[i].valid = false; @@ -227,7 +228,7 @@ cyg_tracemsg(cyg_uint32 what, char* fn, } extern "C" void -cyg_tracemsg2(cyg_uint32 what, char *fn, char* file, cyg_uint32 line, char *msg, +cyg_tracemsg2(cyg_uint32 what, const char* fn, const char* file, cyg_uint32 line, const char *msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1) { int i = trace_index; @@ -256,7 +257,7 @@ cyg_tracemsg2(cyg_uint32 what, char *fn, } extern "C" void -cyg_tracemsg4(cyg_uint32 what, char *fn, char* file, cyg_uint32 line, char *msg, +cyg_tracemsg4(cyg_uint32 what, const char *fn, const char* file, cyg_uint32 line, const char *msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3) { @@ -286,7 +287,7 @@ cyg_tracemsg4(cyg_uint32 what, char *fn, } extern "C" void -cyg_tracemsg6(cyg_uint32 what, char *fn, char* file, cyg_uint32 line, char *msg, +cyg_tracemsg6(cyg_uint32 what, const char *fn, const char* file, cyg_uint32 line, const char *msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3, CYG_ADDRWORD arg4, CYG_ADDRWORD arg5) @@ -317,7 +318,7 @@ cyg_tracemsg6(cyg_uint32 what, char *fn, } extern "C" void -cyg_tracemsg8(cyg_uint32 what, char *fn, char* file, cyg_uint32 line, char *msg, +cyg_tracemsg8(cyg_uint32 what, const char* fn, const char* file, cyg_uint32 line, const char *msg, CYG_ADDRWORD arg0, CYG_ADDRWORD arg1, CYG_ADDRWORD arg2, CYG_ADDRWORD arg3, CYG_ADDRWORD arg4, CYG_ADDRWORD arg5, @@ -376,7 +377,7 @@ cyg_tracemsg8(cyg_uint32 what, char *fn, // to just use sprintf() for this. static std::string -trim_file(char* file) +trim_file(const char* file) { // If the output is to look reasonable then the result should be a // fixed length. 20 characters is reasonable for now. @@ -390,7 +391,7 @@ trim_file(char* file) // a directory separator is found. Given the number of levels // in a typical eCos directory hierarchy it is probably not // worthwhile outputting any of that information. - char * pEnd = file + strlen(file); + const char * pEnd = file + strlen(file); while ((pEnd > file) && ('/' != *pEnd) && ('\\' != *pEnd)) { pEnd--; } @@ -430,7 +431,7 @@ trim_linenum(cyg_uint32 line) // to be followed immediately by the argument list. No maximum // length is imposed - arguably that is a bad idea. static std::string -trim_function(char* fn) +trim_function(const char* fn) { if (0 == fn) { return ""; @@ -443,7 +444,7 @@ trim_function(char* fn) // // First locate the opening bracket. The function name can // be identified by walking backwards from that. - char *s; + const char *s; for (s = fn; ('\0' != *s) && ('(' != *s); s++); for ( ; (s > fn) && (*s != ' '); s--); if ( s > fn) s++; @@ -460,7 +461,7 @@ trim_function(char* fn) // whether the argument is still valid, and return a suitable // approximation to the actual data. static std::string -trim_string(char * arg) +trim_string(const char * arg) { const int max_string_len = 20; @@ -485,7 +486,7 @@ trim_string(char * arg) // checking happens first. static std::string -parse_msg(char* msg, trace_entry& entry) +parse_msg(const char* msg, trace_entry& entry) { if (0 == msg) { return ""; diff --git a/host/install-sh b/host/install-sh deleted file mode 100644 --- a/host/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/host/libcdl/ChangeLog b/host/libcdl/ChangeLog --- a/host/libcdl/ChangeLog +++ b/host/libcdl/ChangeLog @@ -1,3 +1,9 @@ +2002-08-03 Bart Veer + + * acinclude.m4, configure.in, Makefile.am, testsuite/Makefile.am, + testsuite/config/default.exp: + Rework host-side autoconf support + 2002-03-04 Gary Thomas * build.cxx (update_header_file_info): diff --git a/host/libcdl/Makefile.am b/host/libcdl/Makefile.am --- a/host/libcdl/Makefile.am +++ b/host/libcdl/Makefile.am @@ -6,30 +6,29 @@ ## libcdl.a ## ## ===================================================================== -######COPYRIGHTBEGIN#### -## +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### ## ---------------------------------------------------------------------------- -## Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. -## -## This file is part of the eCos host tools. -## -## This program is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the Free -## Software Foundation; either version 2 of the License, or (at your option) -## any later version. -## -## This program is distributed in the hope that it will be useful, but WITHOUT -## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -## more details. -## -## You should have received a copy of the GNU General Public License along with -## this program; if not, write to the Free Software Foundation, Inc., -## 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# ## ---------------------------------------------------------------------------- -## -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -41,13 +40,15 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus -SUBDIRS = testsuite +AUTOMAKE_OPTIONS = 1.3 foreign +SUBDIRS = testsuite ## Pick up compiler flags etc. from configury -INCLUDES = @INCLUDES@ -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ +INCLUDES = @ecos_INCLUDES@ +LIBS = @ecos_LIBS@ @ecos_LDADD@ +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_infra_incdir = @ecos_infra_incdir@ ## This package exports its interface via cdl.hxx include_HEADERS = cdlcore.hxx cdl.hxx @@ -110,11 +111,11 @@ endif ## Add specific dependencies for all source files. ## Every module in libcdl uses assertions and tracing. ## These pull in the others. -infra_headers := $(cyg_ac_infra_incdir)/cyg/infra/cyg_ass.h \ - $(cyg_ac_infra_incdir)/cyg/infra/cyg_trac.h \ - $(cyg_ac_infra_incdir)/pkgconf/infra.h \ - $(cyg_ac_infra_incdir)/pkgconf/hostinfra.h \ - $(cyg_ac_infra_incdir)/cyg/infra/cyg_type.h +infra_headers := $(ecos_infra_incdir)/cyg/infra/cyg_ass.h \ + $(ecos_infra_incdir)/cyg/infra/cyg_trac.h \ + $(ecos_infra_incdir)/pkgconf/infra.h \ + $(ecos_infra_incdir)/pkgconf/hostinfra.h \ + $(ecos_infra_incdir)/cyg/infra/cyg_type.h ## Depending on the flavor of CDL being implemented, different ## headers will get included. diff --git a/host/libcdl/Makefile.in b/host/libcdl/Makefile.in --- a/host/libcdl/Makefile.in +++ b/host/libcdl/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,8 +10,27 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -######COPYRIGHTBEGIN#### -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -66,45 +85,76 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ RANLIB = @RANLIB@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_infra_incdir = @cyg_ac_infra_incdir@ -cyg_ac_infra_libdir = @cyg_ac_infra_libdir@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus +AUTOMAKE_OPTIONS = 1.3 foreign SUBDIRS = testsuite -INCLUDES = @INCLUDES@ -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ +INCLUDES = @ecos_INCLUDES@ +LIBS = @ecos_LIBS@ @ecos_LDADD@ +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_infra_incdir = @ecos_infra_incdir@ include_HEADERS = cdlcore.hxx cdl.hxx -sources := interp.cxx expr.cxx func.cxx refer.cxx cdlmisc.cxx conflict.cxx property.cxx parse.cxx base.cxx value.cxx build.cxx dialog.cxx wizard.cxx interface.cxx transact.cxx infer.cxx database.cxx config.cxx package.cxx component.cxx option.cxx +sources := interp.cxx \ + expr.cxx \ + func.cxx \ + refer.cxx \ + cdlmisc.cxx \ + conflict.cxx \ + property.cxx \ + parse.cxx \ + base.cxx \ + value.cxx \ + build.cxx \ + dialog.cxx \ + wizard.cxx \ + interface.cxx \ + transact.cxx \ + infer.cxx \ + database.cxx \ + config.cxx \ + package.cxx \ + component.cxx \ + option.cxx noinst_LIBRARIES = libcdl.a libcdl_a_SOURCES = $(sources) -infra_headers := $(cyg_ac_infra_incdir)/cyg/infra/cyg_ass.h $(cyg_ac_infra_incdir)/cyg/infra/cyg_trac.h $(cyg_ac_infra_incdir)/pkgconf/infra.h $(cyg_ac_infra_incdir)/pkgconf/hostinfra.h $(cyg_ac_infra_incdir)/cyg/infra/cyg_type.h +infra_headers := $(ecos_infra_incdir)/cyg/infra/cyg_ass.h \ + $(ecos_infra_incdir)/cyg/infra/cyg_trac.h \ + $(ecos_infra_incdir)/pkgconf/infra.h \ + $(ecos_infra_incdir)/pkgconf/hostinfra.h \ + $(ecos_infra_incdir)/cyg/infra/cyg_type.h cdlcore_headers := cdlconfig.h cdlcore.hxx cdl_headers := $(cdlcore_headers) cdl.hxx ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/../../acsupport/mkinstalldirs CONFIG_HEADER = cdlconfig.h CONFIG_CLEAN_FILES = LIBRARIES = $(noinst_LIBRARIES) @@ -113,7 +163,6 @@ LIBRARIES = $(noinst_LIBRARIES) DEFS = @DEFS@ -I. -I$(srcdir) -I. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ libcdl_a_LIBADD = libcdl_a_OBJECTS = interp.$(OBJEXT) expr.$(OBJEXT) func.$(OBJEXT) \ refer.$(OBJEXT) cdlmisc.$(OBJEXT) conflict.$(OBJEXT) property.$(OBJEXT) \ @@ -136,6 +185,12 @@ DISTFILES = $(DIST_COMMON) $(SOURCES) $( TAR = gtar GZIP_ENV = --best +DEP_FILES = .deps/base.P .deps/build.P .deps/cdlmisc.P \ +.deps/component.P .deps/config.P .deps/conflict.P .deps/database.P \ +.deps/dialog.P .deps/expr.P .deps/func.P .deps/infer.P \ +.deps/interface.P .deps/interp.P .deps/option.P .deps/package.P \ +.deps/parse.P .deps/property.P .deps/refer.P .deps/transact.P \ +.deps/value.P .deps/wizard.P SOURCES = $(libcdl_a_SOURCES) OBJECTS = $(libcdl_a_OBJECTS) @@ -143,9 +198,9 @@ all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .cxx .o .obj .s $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -194,9 +249,6 @@ distclean-noinstLIBRARIES: maintainer-clean-noinstLIBRARIES: -.c.o: - $(COMPILE) -c $< - # FIXME: We should only use cygpath when building on Windows, # and only if it is available. .c.obj: @@ -253,7 +305,7 @@ uninstall-includeHEADERS: @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ @@ -279,7 +331,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ @@ -370,8 +422,13 @@ distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ @@ -390,16 +447,65 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done + +DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) + +-include $(DEP_FILES) + +mostlyclean-depend: + +clean-depend: + +distclean-depend: + -rm -rf .deps + +maintainer-clean-depend: + +%.o: %.c + @echo '$(COMPILE) -c $<'; \ + $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.c + @echo '$(LTCOMPILE) -c $<'; \ + $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp + +%.o: %.cxx + @echo '$(CXXCOMPILE) -c $<'; \ + $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-cp .deps/$(*F).pp .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm .deps/$(*F).pp + +%.lo: %.cxx + @echo '$(LTCXXCOMPILE) -c $<'; \ + $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< + @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ + < .deps/$(*F).pp > .deps/$(*F).P; \ + tr ' ' '\012' < .deps/$(*F).pp \ + | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ + >> .deps/$(*F).P; \ + rm -f .deps/$(*F).pp info-am: info: info-recursive dvi-am: dvi: dvi-recursive -check-am: +check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive -install-info-am: -install-info: install-info-recursive all-recursive-am: cdlconfig.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -433,18 +539,19 @@ distclean-generic: maintainer-clean-generic: mostlyclean-am: mostlyclean-hdr mostlyclean-noinstLIBRARIES \ - mostlyclean-compile mostlyclean-tags \ + mostlyclean-compile mostlyclean-tags mostlyclean-depend \ mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-noinstLIBRARIES clean-compile clean-tags \ - clean-generic mostlyclean-am clean-local + clean-depend clean-generic mostlyclean-am clean-local clean: clean-recursive distclean-am: distclean-hdr distclean-noinstLIBRARIES distclean-compile \ - distclean-tags distclean-generic clean-am + distclean-tags distclean-depend distclean-generic \ + clean-am distclean: distclean-recursive -rm -f config.status @@ -452,7 +559,8 @@ distclean: distclean-recursive maintainer-clean-am: maintainer-clean-hdr \ maintainer-clean-noinstLIBRARIES \ maintainer-clean-compile maintainer-clean-tags \ - maintainer-clean-generic distclean-am + maintainer-clean-depend maintainer-clean-generic \ + distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." @@ -470,13 +578,15 @@ uninstalldirs-recursive all-recursive ch installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ -distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info all-recursive-am install-exec-local install-exec-am \ -install-exec install-data-am install-data install-am install \ -uninstall-am uninstall all-local all-redirect all-am all installdirs-am \ -installdirs mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean +distclean-tags clean-tags maintainer-clean-tags distdir \ +mostlyclean-depend distclean-depend clean-depend \ +maintainer-clean-depend info-am info dvi-am dvi check check-am \ +installcheck-am installcheck all-recursive-am install-exec-local \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-local all-redirect all-am all \ +installdirs-am installdirs mostlyclean-generic distclean-generic \ +clean-generic maintainer-clean-generic clean mostlyclean distclean \ +maintainer-clean @MSVC_TRUE@all-local: cdl.lib diff --git a/host/libcdl/acinclude.m4 b/host/libcdl/acinclude.m4 --- a/host/libcdl/acinclude.m4 +++ b/host/libcdl/acinclude.m4 @@ -5,10 +5,9 @@ dnl dnl acinclude.m4 dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -27,8 +26,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -43,4 +41,4 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../acinclude.m4) +sinclude(../../acsupport/acinclude.m4) diff --git a/host/libcdl/aclocal.m4 b/host/libcdl/aclocal.m4 --- a/host/libcdl/aclocal.m4 +++ b/host/libcdl/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -17,10 +17,9 @@ dnl dnl acinclude.m4 dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -39,8 +38,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -55,11 +53,11 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../acinclude.m4) +sinclude(../../acsupport/acinclude.m4) # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then @@ -79,7 +77,7 @@ fi]) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -107,7 +105,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -148,7 +146,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -167,7 +165,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, @@ -184,7 +182,7 @@ AC_DEFUN(AM_MAINTAINER_MODE, # Like AC_CONFIG_HEADER, but automatically create stamp file. -AC_DEFUN(AM_CONFIG_HEADER, +AC_DEFUN([AM_CONFIG_HEADER], [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. diff --git a/host/libcdl/configure b/host/libcdl/configure --- a/host/libcdl/configure +++ b/host/libcdl/configure @@ -15,9 +15,9 @@ ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help - --enable-debug do a debug rather than a release build" + --enable-debug do a debug rather than a release build" ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" + --enable-ansi do an ANSI rather than a unicode build" ac_help="$ac_help --disable-asserts disable all assertions" ac_help="$ac_help @@ -33,6 +33,12 @@ ac_help="$ac_help ac_help="$ac_help --disable-fntracing disable function entry/exit tracing" ac_help="$ac_help + --with-infra-header= location of eCos infrastructure headers" +ac_help="$ac_help + --with-infra-lib= location of eCos infrastructure library" +ac_help="$ac_help + --with-infra= location of eCos infrastructure installation" +ac_help="$ac_help --with-tcl-version= version of Tcl to be used" ac_help="$ac_help --with-tcl-header= location of Tcl header" @@ -40,8 +46,6 @@ ac_help="$ac_help --with-tcl-lib= location of Tcl libraries" ac_help="$ac_help --with-tcl= location of Tcl header and libraries" -ac_help="$ac_help - --with-infra=dir location of the infrastructure build tree" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -554,7 +558,7 @@ fi ac_aux_dir= -for ac_dir in .. $srcdir/..; do +for ac_dir in ../../acsupport $srcdir/../../acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -566,7 +570,7 @@ for ac_dir in .. $srcdir/..; do fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in ../../acsupport $srcdir/../../acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -574,13 +578,27 @@ ac_configure=$ac_aux_dir/configure # Thi + echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6 +echo "configure:583: checking that a separate build tree is being used" >&5 + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} + fi + if test "${ecos_cwd}" = "${srcdir}" ; then + echo "$ac_t""no" 1>&6 + { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; } + else + echo "$ac_t""yes" 1>&6 + fi + + # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:584: checking host system type" >&5 +echo "configure:602: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -600,7 +618,6 @@ host_vendor=`echo $host | sed 's/^\([^-] host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 - # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -613,7 +630,7 @@ echo "$ac_t""$host" 1>&6 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:617: checking for a BSD compatible install" >&5 +echo "configure:634: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -666,7 +683,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:670: checking whether build environment is sane" >&5 +echo "configure:687: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -723,7 +740,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:727: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:744: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -769,7 +786,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:773: checking for working aclocal" >&5 +echo "configure:790: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -782,7 +799,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:786: checking for working autoconf" >&5 +echo "configure:803: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -795,7 +812,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:799: checking for working automake" >&5 +echo "configure:816: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -808,7 +825,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:812: checking for working autoheader" >&5 +echo "configure:829: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -821,7 +838,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:825: checking for working makeinfo" >&5 +echo "configure:842: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -843,7 +860,7 @@ EOF echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:847: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:864: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -866,37 +883,10 @@ fi -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:871: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:900: checking for $ac_word" >&5 +echo "configure:890: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -926,7 +916,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:930: checking for $ac_word" >&5 +echo "configure:920: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -977,7 +967,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:981: checking for $ac_word" >&5 +echo "configure:971: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1009,7 +999,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1003: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1020,12 +1010,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1024 "configure" +#line 1014 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1019: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1051,12 +1041,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1055: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1045: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1060: checking whether we are using GNU C" >&5 +echo "configure:1050: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1065,7 +1055,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1059: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1084,7 +1074,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1088: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1078: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1120,7 +1110,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1124: checking for $ac_word" >&5 +echo "configure:1114: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1152,7 +1142,7 @@ test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1156: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:1146: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1163,12 +1153,12 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext << EOF -#line 1167 "configure" +#line 1157 "configure" #include "confdefs.h" int main(){return(0);} EOF -if { (eval echo configure:1172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1194,12 +1184,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1198: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1188: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1203: checking whether we are using GNU C++" >&5 +echo "configure:1193: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1208,7 +1198,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1227,7 +1217,7 @@ ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1231: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1221: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1258,10 +1248,61 @@ else fi fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat > conftest.$ac_ext < +$ac_declaration +int main() { +exit (42); +; return 0; } +EOF +if { (eval echo configure:1270: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + continue +fi +rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1265: checking for $ac_word" >&5 +echo "configure:1306: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1289,13 +1330,13 @@ else fi echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1293: checking for object suffix" >&5 +echo "configure:1334: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1299: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1340: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1313,12 +1354,12 @@ OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1317: checking for Cygwin environment" >&5 +echo "configure:1358: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1374: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1346,19 +1387,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1350: checking for mingw32 environment" >&5 +echo "configure:1391: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1377,7 +1418,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=y echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1381: checking for executable suffix" >&5 +echo "configure:1422: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1387,7 +1428,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; @@ -1408,17 +1449,39 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT + ecos_CFLAGS="" + ecos_CXXFLAGS="" + ecos_LDADD="" + ecos_INCLUDES="" + ecos_LIBS="" + + + + + + + + echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1416: checking "for Visual C++"" >&5 +echo "configure:1470: checking "for Visual C++"" >&5 MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" + CXX="cl" + + + + if test "${MSVC}" = "yes" ; then + MSVC_SRCDIR=`cygpath -w ${MSVC_SRCDIR} | tr \\\\\\\\ /` fi - if test "${CXX}" = "cl" ; then - MSVC="yes" + + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${msvc_srcdir}\"" + ecos_LDADD="-link" + ecos_LIBS="advapi32.lib" fi @@ -1429,409 +1492,473 @@ else MSVC_TRUE='#' MSVC_FALSE= fi - echo "$ac_t""${MSVC}" 1>&6 + if test "${MSVC}" = "yes" ; then + echo "$ac_t""unfortunately yes" 1>&6 + else + echo "$ac_t""no" 1>&6 + fi + echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1441: checking "the default compiler flags"" >&5 +echo "configure:1509: checking "the default compiler flags"" >&5 - cygflags_enable_debug="no" + ecosflags_enable_debug="no" # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; + yes) ecosflags_enable_debug="yes" ;; + *) ecosflags_enable_debug="no" ;; esac fi - cygflags_enable_ansi="no" + ecosflags_enable_ansi="no" if test "${MSVC}" = "yes" ; then # Check whether --enable-ansi or --disable-ansi was given. if test "${enable_ansi+set}" = set; then enableval="$enable_ansi" case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; + yes) ecosflags_enable_ansi="yes" ;; + *) ecosflags_enable_ansi="no" ;; esac fi fi if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" + ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" + ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" else { echo "configure: error: "default flags for ${CC} are not known"" 1>&2; exit 1; } fi - if test "${cygflags_enable_debug}" = "yes" ; then + if test "${ecosflags_enable_debug}" = "yes" ; then if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" + ecos_CFLAGS="${ecos_CFLAGS} -g -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" + ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" fi else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" + ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" fi fi CFLAGS="${ac_save_CFLAGS}" CXXFLAGS="${ac_save_CXXFLAGS}" - - + echo "$ac_t""done" 1>&6 - - - + -if test "${cygflags_enable_debug}" = "yes" ; then - cyginfra_asserts=yes - cyginfra_preconditions=yes - cyginfra_postconditions=yes - cyginfra_invariants=yes - cyginfra_loopinvariants=yes - cyginfra_tracing=yes - cyginfra_fntracing=yes -else - cyginfra_asserts=no - cyginfra_preconditions=no - cyginfra_postconditions=no - cyginfra_invariants=no - cyginfra_loopinvariants=no - cyginfra_tracing=no - cyginfra_fntracing=no -fi + if test "${ecosflags_enable_debug}" = "yes" ; then + ecosinfra_asserts="yes" + ecosinfra_preconditions="yes" + ecosinfra_postconditions="yes" + ecosinfra_invariants="yes" + ecosinfra_loopinvariants="yes" + ecosinfra_tracing="yes" + ecosinfra_fntracing="yes" + else + ecosinfra_asserts="no" + ecosinfra_preconditions="no" + ecosinfra_postconditions="no" + ecosinfra_invariants="no" + ecosinfra_loopinvariants="no" + ecosinfra_tracing="no" + ecosinfra_fntracing="no" + fi -# Check whether --enable-asserts or --disable-asserts was given. + # Check whether --enable-asserts or --disable-asserts was given. if test "${enable_asserts+set}" = set; then enableval="$enable_asserts" case "${enableval}" in - yes) cyginfra_asserts=yes ;; - no) cyginfra_asserts=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-asserts option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_asserts="yes" ;; + no) ecosinfra_asserts="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-asserts option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_asserts}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_asserts}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_USE_ASSERTS 1 EOF -fi + fi -# Check whether --enable-preconditions or --disable-preconditions was given. + # Check whether --enable-preconditions or --disable-preconditions was given. if test "${enable_preconditions+set}" = set; then enableval="$enable_preconditions" case "${enableval}" in - yes) cyginfra_preconditions=yes ;; - no) cyginfra_preconditions=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-preconditions option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_preconditions="yes" ;; + no) ecosinfra_preconditions="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-preconditions option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_preconditions}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_preconditions}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_PRECONDITIONS 1 EOF -fi + fi -# Check whether --enable-postconditions or --disable-postconditions was given. + # Check whether --enable-postconditions or --disable-postconditions was given. if test "${enable_postconditions+set}" = set; then enableval="$enable_postconditions" case "${enableval}" in - yes) cyginfra_postconditions=yes ;; - no) cyginfra_postconditions=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-postconditions option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_postconditions="yes" ;; + no) ecosinfra_postconditions="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-postconditions option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_postconditions}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_postconditions}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_POSTCONDITIONS 1 EOF -fi + fi -# Check whether --enable-invariants or --disable-invariants was given. + # Check whether --enable-invariants or --disable-invariants was given. if test "${enable_invariants+set}" = set; then enableval="$enable_invariants" case "${enableval}" in - yes) cyginfra_invariants=yes ;; - no) cyginfra_invariants=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-invariants option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_invariants="yes" ;; + no) ecosinfra_invariants="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-invariants option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_invariants}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_invariants}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_INVARIANTS 1 EOF -fi + fi -# Check whether --enable-loopinvariants or --disable-loopinvariants was given. + # Check whether --enable-loopinvariants or --disable-loopinvariants was given. if test "${enable_loopinvariants+set}" = set; then enableval="$enable_loopinvariants" case "${enableval}" in - yes) cyginfra_loopinvariants=yes ;; - no) cyginfra_loopinvariants=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-loopinvariants option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_loopinvariants="yes" ;; + no) ecosinfra_loopinvariants="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-loopinvariants option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_loopinvariants}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_loopinvariants}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS 1 EOF -fi + fi -# Check whether --enable-tracing or --disable-tracing was given. + # Check whether --enable-tracing or --disable-tracing was given. if test "${enable_tracing+set}" = set; then enableval="$enable_tracing" case "${enableval}" in - yes) cyginfra_tracing=yes ;; - no) cyginfra_tracing=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-tracing option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_tracing="yes" ;; + no) ecosinfra_tracing="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-tracing option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_tracing}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_tracing}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_USE_TRACING 1 EOF -fi + fi -# Check whether --enable-fntracing or --disable-fntracing was given. + # Check whether --enable-fntracing or --disable-fntracing was given. if test "${enable_fntracing+set}" = set; then enableval="$enable_fntracing" case "${enableval}" in - yes) cyginfra_fntracing=yes ;; - no) cyginfra_fntracing=no ;; - *) { echo "configure: error: bad value ${enableval} for disable-fntracing option" 1>&2; exit 1; } ;; -esac + yes) ecosinfra_fntracing="yes" ;; + no) ecosinfra_fntracing=no ;; + *) { echo "configure: error: bad value ${enableval} for disable-fntracing option" 1>&2; exit 1; } ;; + esac fi -if test "${cyginfra_fntracing}" = "yes"; then - cat >> confdefs.h <<\EOF + if test "${ecosinfra_fntracing}" = "yes"; then + cat >> confdefs.h <<\EOF #define CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS 1 EOF + fi + + + echo $ac_n "checking for eCos host-side infrastructure""... $ac_c" 1>&6 +echo "configure:1711: checking for eCos host-side infrastructure" >&5 + + infra_builddir="" + possibles=".. ../.. ../../.. ../../../.. ../../../../.." + + infra_builddir="" + for i in ${possibles}; do + if test -d "$i/"infra""; then + infra_builddir=$i + break + fi + done + + if test "${infra_builddir}" = "" ; then + possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" + + infra_builddir="" + for i in ${possibles}; do + if test -d "$i/"infra""; then + infra_builddir=$i + break + fi + done + + fi + if test "${infra_builddir}" != "" ; then + infra_builddir="${infra_builddir}/infra" + infra_builddir=`cd ${infra_builddir} && /bin/pwd` + fi + + ecos_infra_incdir="" + ecos_infra_libdir="" + ecos_infra_libs="" + + # Check whether --with-infra-header or --without-infra-header was given. +if test "${with_infra_header+set}" = set; then + withval="$with_infra_header" + : +fi + + # Check whether --with-infra-lib or --without-infra-lib was given. +if test "${with_infra_lib+set}" = set; then + withval="$with_infra_lib" + : +fi + + # Check whether --with-infra or --without-infra was given. +if test "${with_infra+set}" = set; then + withval="$with_infra" + : fi + if test "${with_infra_header+set}" = "set"; then + ecos_infra_incdir="${with_infra_header}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_incdir="${with_infra}/include" + elif test "${infra_builddir}" != "" ; then + ecos_infra_incdir="${infra_builddir}" + else + { echo "configure: error: infrastructure headers not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_incdir = ${ecos_infra_incdir} + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_incdir=`cygpath -w ${ecos_msvc_infra_incdir} | tr \\\\\\\\ /` + fi + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_infra_incdir}\"" + else + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_infra_incdir}" + fi + + if test "${with_infra_lib+set}" = "set"; then + ecos_infra_libdir="${with_infra_lib}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_libdir="${with_infra}/lib" + elif test "${infra_builddir}" != "" ; then + ecos_infra_libdir="${infra_builddir}" + else + { echo "configure: error: infrastructure library not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_libdir=${ecos_infra_libdir} + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_libdir=`cygpath -w ${ecos_msvc_infra_libdir} | tr \\\\\\\\ /` + fi + + ecos_LIBS="${ecos_LIBS} cyginfra.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_infra_libdir}\"" + else + ecos_LIBS="${ecos_LIBS} -lcyginfra" + ecos_LDADD="${ecos_LDADD} -L${ecos_infra_libdir}" + fi + + + + echo "$ac_t""-I${ecos_infra_incdir} -L${ecos_infra_libdir}" 1>&6 - - + + -echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 -echo "configure:1653: checking for Tcl version" >&5 -# Check whether --with-tcl-version or --without-tcl-version was given. + ecos_tcl_version="" + ecos_tcl_incdir="" + ecos_tcl_libdir="" + ecos_tk_libs="" + + + echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 +echo "configure:1828: checking for Tcl version" >&5 + # Check whether --with-tcl-version or --without-tcl-version was given. if test "${with_tcl_version+set}" = set; then withval="$with_tcl_version" - cyg_ac_tcl_version=${with_tcl_version} - + ecos_tcl_version=${with_tcl_version} + else - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi - + if test "${MSVC}" = "yes" ; then + ecos_tcl_version=80 + elif test "${ac_cv_cygwin}" = "yes" ; then + ecos_tcl_version=80 + else + ecos_tcl_version="" + fi + fi -echo "$ac_t""${cyg_ac_tcl_version}" 1>&6 - - + echo "$ac_t""${ecos_tcl_version}" 1>&6 -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" + echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 +echo "configure:1850: checking for Tcl installation" >&5 + + # Check whether --with-tcl-header or --without-tcl-header was given. +if test "${with_tcl_header+set}" = set; then + withval="$with_tcl_header" : fi -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" + # Check whether --with-tcl-lib or --without-tcl-lib was given. +if test "${with_tcl_lib+set}" = set; then + withval="$with_tcl_lib" : fi -# Check whether --with-tcl or --without-tcl was given. + # Check whether --with-tcl or --without-tcl was given. if test "${with_tcl+set}" = set; then withval="$with_tcl" : fi -echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 -echo "configure:1698: checking for Tcl installation" >&5 - + + if test "${MSVC}" = "yes" ; then -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" -else - tcl_incdirs="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl$cyg_ac_tcl_version /usr/include" + if test "${with_tcl_header+set}" = set ; then + ecos_tcl_incdir=${with_tcl_header} + elif test "${with_tcl+set}" = set ; then + ecos_tcl_incdir="${with_tcl}/include" + else + { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } + fi -cyg_ac_tcl_incdir=NO -for i in $tcl_incdirs; -do - for j in tcl.h; - do - if test -r "$i/$j"; then - cyg_ac_tcl_incdir=$i - break 2 + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } + fi + ecos_msvc_tcl_incdir="${ecos_tcl_incdir}" + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_tcl_incdir=`cygpath -w ${ecos_msvc_tcl_incdir} | tr \\\\\\\\ /` fi - done -done - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - -cyg_ac_tcl_libdir=NO -for i in $tcl_libdirs; -do - for j in tclConfig.sh; - do - if test -r "$i/$j"; then - cyg_ac_tcl_libdir=$i - break 2 - fi - done -done + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_tcl_incdir}\"" - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } -fi - -if test "${MSVC}" = "yes" ; then - + if test "${with_tcl_lib+set}" = set; then + ecos_tcl_libdir=${with_tcl_lib} + elif test "${with_tcl+set}" = set; then + ecos_tcl_libdir="${with_tcl}/lib" + else + { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } + fi + - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_incdir=`cygpath -w ${cyg_ac_tcl_incdir} | tr \\\\\\\\ /` - fi - - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_libdir=`cygpath -w ${cyg_ac_tcl_libdir} | tr \\\\\\\\ /` + ecos_tcl_libdir=`cygpath -w ${ecos_tcl_libdir} | tr \\\\\\\\ /` fi -fi + ecos_LIBS="${ecos_LIBS} tcl${ecos_tcl_version}.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_tcl_libdir}\"" -echo "$ac_t""${cyg_ac_tcl_libdir}" 1>&6 - + ecos_tk_libs="" - - - - - + else + possibles="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl${ecos_tcl_version} /usr/include" + + ecos_tcl_incdir="" + for i in ${possibles}; do + if test -r "$i/"tcl.h""; then + ecos_tcl_incdir=$i + break + fi + done -echo $ac_n "checking for infrastructure files""... $ac_c" 1>&6 -echo "configure:1791: checking for infrastructure files" >&5 -# Check whether --with-infra or --without-infra was given. -if test "${with_infra+set}" = set; then - withval="$with_infra" - - cyg_ac_infra_incdir=${with_infra} - cyg_ac_infra_libdir=${with_infra} + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } + else + if test "${ecos_tcl_incdir}" != "/usr/include" ; then + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_tcl_incdir}" + fi + fi + possibles="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$${ecos_tcl_version} /usr/lib" + + ecos_tcl_libdir="" + for i in ${possibles}; do + if test -r "$i/"tclConfig.sh""; then + ecos_tcl_libdir=$i + break + fi + done -else - - if test -d ../infra ; then - cyg_ac_infra_incdir=../infra - cyg_ac_infra_libdir=../infra - else - cyg_ac_infra_incdir=${prefix}/include - cyg_ac_ac_infra_libdir=${prefix}/lib - fi + if test \! -r "${ecos_tcl_libdir}/tclConfig.sh" ; then + { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } + else + . ${ecos_tcl_libdir}/tclConfig.sh + ecos_LIBS="${ecos_LIBS} -ltcl${ecos_tcl_version} ${TCL_LIBS}" + fi -fi + if test \! -r "${ecos_tcl_libdir}/tkConfig.sh" ; then + { echo "configure: error: unable to locate Tk config file tkConfig.sh" 1>&2; exit 1; } + else + . ${ecos_tcl_libdir}/tkConfig.sh + ecos_tk_libs="-ltk${ecos_tcl_version} ${TK_LIBS}" + for lib in ${TCL_LIBS} ; do + ecos_tk_libs=`echo ${ecos_tk_libs} | sed -e "s!${lib}!!"` + done + fi + fi + echo "$ac_t""-I${ecos_tcl_incdir} -L${ecos_tcl_libdir}" 1>&6 - - - if test "${MSVC}" = "yes" ; then - cyg_ac_infra_incdir=`cygpath -w ${cyg_ac_infra_incdir} | tr \\\\\\\\ /` - fi - - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_infra_libdir=`cygpath -w ${cyg_ac_infra_libdir} | tr \\\\\\\\ /` - fi - - - -echo "$ac_t""-I${cyg_ac_infra_incdir} -L${cyg_ac_infra_libdir}" 1>&6 - -if test "${MSVC}" = "yes" ; then - INCLUDES="\"-I`cygpath -w ${srcdir} | tr \\\\\\\\ /`\" \"-I${cyg_ac_infra_incdir}\" \"-I${cyg_ac_tcl_incdir}\"" -else - INCLUDES="-I${cyg_ac_infra_incdir} -I${cyg_ac_tcl_incdir}" -fi @@ -1994,18 +2121,17 @@ s%@CXX@%$CXX%g s%@RANLIB@%$RANLIB%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g +s%@ecos_CFLAGS@%$ecos_CFLAGS%g +s%@ecos_CXXFLAGS@%$ecos_CXXFLAGS%g +s%@ecos_LDADD@%$ecos_LDADD%g +s%@ecos_INCLUDES@%$ecos_INCLUDES%g +s%@ecos_LIBS@%$ecos_LIBS%g +s%@MSVC_SRCDIR@%$MSVC_SRCDIR%g s%@MSVC_TRUE@%$MSVC_TRUE%g s%@MSVC_FALSE@%$MSVC_FALSE%g -s%@cyg_CFLAGS@%$cyg_CFLAGS%g -s%@cyg_CXXFLAGS@%$cyg_CXXFLAGS%g -s%@cyg_ac_tcl_version@%$cyg_ac_tcl_version%g -s%@cyg_ac_tcl_incdir@%$cyg_ac_tcl_incdir%g -s%@cyg_ac_tcl_libdir@%$cyg_ac_tcl_libdir%g -s%@cyg_ac_tcl_libs@%$cyg_ac_tcl_libs%g -s%@cyg_ac_tk_libs@%$cyg_ac_tk_libs%g -s%@cyg_ac_infra_incdir@%$cyg_ac_infra_incdir%g -s%@cyg_ac_infra_libdir@%$cyg_ac_infra_libdir%g -s%@INCLUDES@%$INCLUDES%g +s%@ecos_infra_incdir@%$ecos_infra_incdir%g +s%@ecos_infra_libdir@%$ecos_infra_libdir%g +s%@ecos_tk_libs@%$ecos_tk_libs%g CEOF EOF diff --git a/host/libcdl/configure.in b/host/libcdl/configure.in --- a/host/libcdl/configure.in +++ b/host/libcdl/configure.in @@ -6,10 +6,10 @@ dnl dnl libcdl.a dnl dnl ==================================================================== -dnl####COPYRIGHTBEGIN#### -dnl +dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### dnl ---------------------------------------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl @@ -28,8 +28,7 @@ dnl this program; if not, write to the F dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl dnl ---------------------------------------------------------------------------- -dnl -dnl####COPYRIGHTEND#### +dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### dnl @@ -44,78 +43,28 @@ dnl ==================================== dnl The core header file had better be present. AC_INIT(cdlcore.hxx) -dnl Pick up the support files from the top-level of the source tree, -dnl one level above packages. -AC_CONFIG_AUX_DIR(..) +dnl Pick up the support files from the top-level acsupport directory. +AC_CONFIG_AUX_DIR(../../acsupport) -dnl Other standard options. +ECOS_CHECK_BUILD_ne_SRC AC_CANONICAL_HOST - AM_INIT_AUTOMAKE(libcdl, 0.2) -CYG_AC_SUBST_VERSION(CYGNUM_LIBCDL_VERSION) +ECOS_SUBST_VERSION(CYGNUM_LIBCDL_VERSION) AM_MAINTAINER_MODE dnl The package contains a library implemented in C++. It has to be dnl buildable under NT. Only a static version of the library is dnl of interest at the moment. -AC_PROG_MAKE_SET AC_PROG_CC AC_PROG_CXX AC_PROG_RANLIB AC_OBJEXT AC_EXEEXT -CYG_AC_PROG_MSVC -CYG_AC_PROG_STANDARD_COMPILER_FLAGS - -dnl AM_DISABLE_SHARED -dnl AM_PROG_LIBTOOL - -dnl Allow the usual assertion and trace related options. -CYG_AC_ARG_INFRASTRUCTURE - -dnl What version of Tcl should be used? -CYG_AC_PATH_TCL - -dnl ------------------------------------------------------------------------ -dnl Where should the infrastructure headers come from? -dnl The default is ../../../../infra/current/host. If the -dnl appropriate header file is not found there, try -dnl $(DESTDIR)$(includedir). In addition allow the user to override -dnl the location with a suitable --with command line argument. +ECOS_PROG_MSVC +ECOS_PROG_STANDARD_COMPILER_FLAGS +ECOS_ARG_INFRASTRUCTURE +ECOS_PATH_INFRA +ECOS_PATH_TCL -AC_MSG_CHECKING(for infrastructure files) -AC_ARG_WITH(infra,[ --with-infra=dir location of the infrastructure build tree],[ - cyg_ac_infra_incdir=${with_infra} - cyg_ac_infra_libdir=${with_infra} -],[ - if test -d ../infra ; then - cyg_ac_infra_incdir=../infra - cyg_ac_infra_libdir=../infra - else - cyg_ac_infra_incdir=${prefix}/include - cyg_ac_ac_infra_libdir=${prefix}/lib - fi -]) -CYG_AC_MSVC_PATH(cyg_ac_infra_incdir) -CYG_AC_MSVC_PATH(cyg_ac_infra_libdir) -AC_SUBST(cyg_ac_infra_incdir) -AC_SUBST(cyg_ac_infra_libdir) -AC_MSG_RESULT(-I${cyg_ac_infra_incdir} -L${cyg_ac_infra_libdir}) - -dnl ------------------------------------------------------------------------ -dnl If VC++ is being used then srcdir is likely to be a cygwin path -dnl rather than a Windows path. This means that the default -I -dnl paths generated by automake will not be acceptable to the compiler. -dnl This should probably be fixed in automake's comp-vars.am file, -dnl but for now this suffices. It is also necessary to worry about -dnl infra_incdir and tcl_incdir -if test "${MSVC}" = "yes" ; then - INCLUDES="\"-I`cygpath -w ${srcdir} | tr \\\\\\\\ /`\" \"-I${cyg_ac_infra_incdir}\" \"-I${cyg_ac_tcl_incdir}\"" -else - INCLUDES="-I${cyg_ac_infra_incdir} -I${cyg_ac_tcl_incdir}" -fi -AC_SUBST(INCLUDES) - -dnl -------------------------------------------------------------------- AM_CONFIG_HEADER(cdlconfig.h:config.h.in) AC_OUTPUT(Makefile:Makefile.in testsuite/Makefile:testsuite/Makefile.in) diff --git a/host/libcdl/testsuite/Makefile.am b/host/libcdl/testsuite/Makefile.am --- a/host/libcdl/testsuite/Makefile.am +++ b/host/libcdl/testsuite/Makefile.am @@ -4,30 +4,28 @@ ## Makefile.am ## ## ===================================================================== -######COPYRIGHTBEGIN#### -## +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### ## ---------------------------------------------------------------------------- -## Copyright (C) 1998, 1999, 2000 Red Hat, Inc. -## -## This file is part of the eCos host tools. -## -## This program is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the Free -## Software Foundation; either version 2 of the License, or (at your option) -## any later version. -## -## This program is distributed in the hope that it will be useful, but WITHOUT -## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -## more details. -## -## You should have received a copy of the GNU General Public License along with -## this program; if not, write to the Free Software Foundation, Inc., -## 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## +# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# ## ---------------------------------------------------------------------------- -## -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## @@ -39,4 +37,4 @@ ######DESCRIPTIONEND#### ## ===================================================================== -AUTOMAKE_OPTIONS = 1.3 cygnus dejagnu +AUTOMAKE_OPTIONS = 1.3 foreign dejagnu diff --git a/host/libcdl/testsuite/Makefile.in b/host/libcdl/testsuite/Makefile.in --- a/host/libcdl/testsuite/Makefile.in +++ b/host/libcdl/testsuite/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,8 +10,26 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -######COPYRIGHTBEGIN#### -######COPYRIGHTEND#### +#######ECOSHOSTGPLCOPYRIGHTBEGIN#### +# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +# +# This file is part of the eCos host tools. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +#######ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -66,26 +84,31 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ -INCLUDES = @INCLUDES@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ RANLIB = @RANLIB@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_infra_incdir = @cyg_ac_infra_incdir@ -cyg_ac_infra_libdir = @cyg_ac_infra_libdir@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ -AUTOMAKE_OPTIONS = 1.3 cygnus dejagnu -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +AUTOMAKE_OPTIONS = 1.3 foreign dejagnu +mkinstalldirs = $(SHELL) $(top_srcdir)/../../acsupport/mkinstalldirs CONFIG_HEADER = ../cdlconfig.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in @@ -95,14 +118,14 @@ DISTFILES = $(DIST_COMMON) $(SOURCES) $( TAR = gtar GZIP_ENV = --best -EXPECT = `if test -f $(top_builddir)/../expect/expect; then echo $(top_builddir)/../expect/expect; else echo expect; fi` -RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then echo $(top_srcdir)/../dejagnu/runtest; else echo runtest; fi` +EXPECT = expect +RUNTEST = runtest all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus testsuite/Makefile + cd $(top_srcdir) && $(AUTOMAKE) --foreign testsuite/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -115,8 +138,13 @@ distdir = $(top_builddir)/$(PACKAGE)-$(V subdir = testsuite distdir: $(DISTFILES) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(top_distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign testsuite/Makefile @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ + d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ @@ -135,10 +163,6 @@ RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) check-DEJAGNU: site.exp srcdir=`cd $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ - if [ -f $(top_builddir)/../expect/expect ]; then \ - TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \ - export TCL_LIBRARY; \ - fi; \ runtest=$(RUNTEST); \ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ $$runtest $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ @@ -163,13 +187,11 @@ info-am: info: info-am dvi-am: dvi: dvi-am -check-am: +check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check: check-am installcheck-am: installcheck: installcheck-am -install-info-am: -install-info: install-info-am install-exec-am: install-exec: install-exec-am @@ -216,11 +238,11 @@ maintainer-clean-am: maintainer-clean-g maintainer-clean: maintainer-clean-am .PHONY: tags distdir check-DEJAGNU info-am info dvi-am dvi check \ -check-am installcheck-am installcheck install-info-am install-info \ -install-exec-am install-exec install-data-am install-data install-am \ -install uninstall-am uninstall all-redirect all-am all installdirs \ -mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/host/libcdl/testsuite/config/default.exp b/host/libcdl/testsuite/config/default.exp --- a/host/libcdl/testsuite/config/default.exp +++ b/host/libcdl/testsuite/config/default.exp @@ -8,7 +8,7 @@ ######COPYRIGHTBEGIN#### # # ---------------------------------------------------------------------------- -# Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # # This file is part of the eCos host tools. # @@ -48,90 +48,20 @@ if { [isnative] != 1 } { } # Most of the test harness lives in a file hosttest.exp. This is part -# of the host-side infrastructure and gets installed in the directory -# $(PREFIX)/share/dejagnu. Other packages have to locate the file -# the hard way since the PREFIX is not provided automatically in -# the site.exp file, instead it is necessary to search through the -# build tree's Makefile. -# -# First look for the infrastructure package. - -set filename [file join $::srcdir "../../../../../infra/current/host/hosttest.exp"] -if { [file exists $filename] } { - - set status [ catch { - source $filename - } message] - if { $status != 0 } { - perror "Unexpected error while reading in the support script $filename\n$message" - exit 1 - } - -} else { - - # It is necessary to read in the Makefile in the build tree and - # look for a line "prefix = xxx". - set filename [file join $::objdir Makefile] - if { [file exists $filename] == 0 } { - perror "The build tree's Makefile $filename does not exist." - exit 1 - } +# of the host-side infrastructure. - set status [ catch { - set fd [open $filename r] - set contents [read $fd] - close $fd - } message] - if { $status != 0 } { - perror "Error reading $filename.\n$message" - exit 1 - } - - set prefix "" - set dummy "" - set match1 "" - - # This regexp is tied more closely to the automake implementation - # then I would like, and it may cause trouble in future. - foreach line [split $contents "\n"] { - if { [regexp -- {^prefix = *(.*)$} $line dummy match1] == 1 } { - set prefix $match1 - break - } - } - if { $prefix == "" } { - perror "Unable to find the install prefix in $filename." - exit 1 - } - - # Now that the install tree is known it is possible to load - # the hosttest.exp script. - set filename [file join $prefix share dejagnu hosttest.exp] - if { [file exists $filename] == 0 } { - perror "The support script $filename has not been installed." - exit 1 - } - - set status [ catch { source $filename } message] - if { $status != 0 } { - perror "Unexpected error while reading in the support script $filename\n$message" - exit 1 - } - +set filename [file join $::srcdir "../../infra/hosttest.exp"] +set status [ catch { source $filename } message] +if { $status != 0 } { + perror "Unexpected error while reading in the support script $filename\n$message" + exit 1 } # Now that the hosttest.exp utilities are available it is possible to do # a bit more initialization. In particular it is possible to read in the # build tree's Makefile and look for definitions of CC, CXX, and any # other information from the Makefile that may prove useful. -hosttest_initialize { - cyg_ac_infra_incdir - cyg_ac_infra_libdir - cyg_ac_tcl_version - cyg_ac_tcl_incdir - cyg_ac_tcl_libdir - cyg_ac_tcl_libs -} +hosttest_initialize # There are standard routines ${tool}_start, ${tool}_load, ${tool}_exit # and ${tool}_version which test harnesses should normally implement. @@ -171,18 +101,7 @@ proc ${tool}_start { } { # all the libraries etc. that are going to be needed. proc ${tool}_load { program { args ""} } { - set incdirs "" - lappend incdirs [file join $::objdir .. $::hosttest_data(cyg_ac_infra_incdir)] - lappend incdirs [file join $::objdir .. $::hosttest_data(cyg_ac_tcl_incdir)] - set libdirs "" - lappend libdirs [file join $::objdir .. $::hosttest_data(cyg_ac_infra_libdir)] - lappend libdirs [file join $::objdir .. $::hosttest_data(cyg_ac_tcl_libdir)] - set libs [list cdl cyginfra] - foreach lib $::hosttest_data(cyg_ac_tcl_libs) { - lappend libs [string range $lib 2 end] - } - - hosttest_run_simple_test $program {} $incdirs $libdirs $libs $args + hosttest_run_simple_test $program {} [list] [list] [list "cdl"] $args } # ${tool}_exit does not serve any useful purpose here. diff --git a/host/ltconfig b/host/ltconfig deleted file mode 100644 --- a/host/ltconfig +++ /dev/null @@ -1,2822 +0,0 @@ -#! /bin/sh - -# ltconfig - Create a system-specific libtool. -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A lot of this script is taken from autoconf-2.10. - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} -echo=echo -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec "$SHELL" "$0" --no-reexec ${1+"$@"} -fi - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != "Xset"; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) PATH_SEPARATOR=';' ;; - *) PATH_SEPARATOR=':' ;; - esac -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi - -if test "X${echo_test_string+set}" != "Xset"; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" != 'X\t' || - test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH /usr/ucb; do - if test -f $dir/echo && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running ltconfig again with it. - ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf "%s\n"' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # Cool, printf works - : - elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# The name of this program. -progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` - -# Constants: -PROGRAM=ltconfig -PACKAGE=libtool -VERSION=1.2f -TIMESTAMP=" (1.385 1999/03/15 17:24:54)" -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5' -rm="rm -f" - -help="Try \`$progname --help' for more information." - -# Global variables: -default_ofile=libtool -can_build_shared=yes -enable_shared=yes -# All known linkers require a `.a' archive for static linking. -enable_static=yes -enable_fast_install=yes -enable_dlopen=unknown -ltmain= -silent= -srcdir= -ac_config_guess= -ac_config_sub= -host= -nonopt= -ofile="$default_ofile" -verify_host=yes -with_gcc=no -with_gnu_ld=no -need_locks=yes -ac_ext=c -objext=o -libext=a -cache_file= - -old_AR="$AR" -old_CC="$CC" -old_CFLAGS="$CFLAGS" -old_CPPFLAGS="$CPPFLAGS" -old_LD="$LD" -old_LN_S="$LN_S" -old_NM="$NM" -old_RANLIB="$RANLIB" -old_DLLTOOL="$DLLTOOL" -old_AS="$AS" - -# Parse the command line options. -args= -prev= -for option -do - case "$option" in - -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - eval "$prev=\$option" - prev= - continue - fi - - case "$option" in - --help) cat <&2 - echo "$help" 1>&2 - exit 1 - ;; - - *) - if test -z "$ltmain"; then - ltmain="$option" - elif test -z "$host"; then -# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 -# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then -# echo "$progname: warning \`$option' is not a valid host type" 1>&2 -# fi - host="$option" - else - echo "$progname: too many arguments" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac -done - -if test -z "$ltmain"; then - echo "$progname: you must specify a LTMAIN file" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -if test ! -f "$ltmain"; then - echo "$progname: \`$ltmain' does not exist" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -# Quote any args containing shell metacharacters. -ltconfig_args= -for arg -do - case "$arg" in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ltconfig_args="$ltconfig_args '$arg'" ;; - *) ltconfig_args="$ltconfig_args $arg" ;; - esac -done - -# A relevant subset of AC_INIT. - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 5 compiler messages saved in config.log -# 6 checking for... messages and results -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>>./config.log - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LANG+set}" = set; then LANG=C; export LANG; fi - -if test -n "$cache_file" && test -r "$cache_file"; then - echo "loading cache $cache_file within ltconfig" - . $cache_file -fi - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - -if test -z "$srcdir"; then - # Assume the source directory is the same one as the path to LTMAIN. - srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` - test "$srcdir" = "$ltmain" && srcdir=. -fi - -trap "$rm conftest*; exit 1" 1 2 15 -if test "$verify_host" = yes; then - # Check for config.guess and config.sub. - ac_aux_dir= - for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/config.guess; then - ac_aux_dir=$ac_dir - break - fi - done - if test -z "$ac_aux_dir"; then - echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 - echo "$help" 1>&2 - exit 1 - fi - ac_config_guess=$ac_aux_dir/config.guess - ac_config_sub=$ac_aux_dir/config.sub - - # Make sure we can run config.sub. - if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : - else - echo "$progname: cannot run $ac_config_sub" 1>&2 - echo "$help" 1>&2 - exit 1 - fi - - echo $ac_n "checking host system type""... $ac_c" 1>&6 - - host_alias=$host - case "$host_alias" in - "") - if host_alias=`$SHELL $ac_config_guess`; then : - else - echo "$progname: cannot guess host type; you must specify one" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac - host=`$SHELL $ac_config_sub $host_alias` - echo "$ac_t$host" 1>&6 - - # Make sure the host verified. - test -z "$host" && exit 1 - -elif test -z "$host"; then - echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 - echo "$help" 1>&2 - exit 1 -else - host_alias=$host -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case "$host_os" in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -case "$host_os" in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "${COLLECT_NAMES+set}" != set; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR cru $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -# Set a sane default for `AR'. -test -z "$AR" && AR=ar - -# If RANLIB is not set, then run the test. -if test "${RANLIB+set}" != "set"; then - result=no - - echo $ac_n "checking for ranlib... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/ranlib; then - RANLIB="ranlib" - result="ranlib" - break - fi - done - IFS="$save_ifs" - - echo "$ac_t$result" 1>&6 -fi - -if test -n "$RANLIB"; then - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" -fi - -# Set sane defaults for `DLLTOOL' and `AS', used on cygwin. -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$AS" && AS=as - -# Check to see if we are using GCC. -if test "$with_gcc" != yes || test -z "$CC"; then - # If CC is not set, then try to find GCC or a usable CC. - if test -z "$CC"; then - echo $ac_n "checking for gcc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - IFS="$save_ifs" - test -z "$dir" && dir=. - if test -f $dir/gcc; then - CC="gcc" - break - fi - done - IFS="$save_ifs" - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - fi - - # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". - if test -z "$CC"; then - echo $ac_n "checking for cc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - cc_rejected=no - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/cc; then - if test "$dir/cc" = "/usr/ucb/cc"; then - cc_rejected=yes - continue - fi - CC="cc" - break - fi - done - IFS="$save_ifs" - if test $cc_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same name, so the bogon will be chosen - # first if we set CC to just the name; use the full file name. - shift - set dummy "$dir/cc" "$@" - shift - CC="$@" - fi - fi - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$CC"; then - echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 - exit 1 - fi - fi - - # Now see if the compiler is really GCC. - with_gcc=no - echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 - echo "$progname:564: checking whether we are using GNU C" >&5 - - $rm conftest.c - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - with_gcc=yes - fi - $rm conftest.c - echo "$ac_t$with_gcc" 1>&6 -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo $ac_n "checking for object suffix... $ac_c" 1>&6 -$rm conftest* -echo 'int i = 1;' > conftest.c -echo "$progname:586: checking for object suffix" >& 5 -if { (eval echo $progname:587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - cat conftest.err 1>&5 - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 -fi -$rm conftest* -echo "$ac_t$objext" 1>&6 - -echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 -pic_flag= -special_shlib_compile_flags= -wl= -link_static_flag= -no_builtin_flag= - -if test "$with_gcc" = yes; then - wl='-Wl,' - link_static_flag='-static' - - case "$host_os" in - beos* | irix5* | irix6* | osf3* | osf4*) - # PIC is the default for these OSes. - ;; - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # we not sure about C++ programs. - link_static_flag="$link_static_flag ${wl}-lC" - ;; - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - pic_flag='-m68020 -resident32 -malways-restore-a4' - ;; - *) - pic_flag='-fPIC' - ;; - esac -else - # PORTME Check for PIC flags for the system compiler. - case "$host_os" in - aix3* | aix4*) - # All AIX code is PIC. - link_static_flag='-bnso -bI:/lib/syscalls.exp' - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better link_static_flag that works with the bundled CC? - wl='-Wl,' - link_static_flag="${wl}-a ${wl}archive" - pic_flag='+Z' - ;; - - irix5* | irix6*) - wl='-Wl,' - link_static_flag='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - - osf3* | osf4*) - # All OSF/1 code is PIC. - wl='-Wl,' - link_static_flag='-non_shared' - ;; - - sco3.2v5*) - pic_flag='-Kpic' - link_static_flag='-dn' - special_shlib_compile_flags='-belf' - ;; - - solaris*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - sunos4*) - pic_flag='-PIC' - link_static_flag='-Bstatic' - wl='-Qoption ld ' - ;; - - sysv4.2uw2* | sysv4.3* | sysv5*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - uts4*) - pic_flag='-pic' - link_static_flag='-Bstatic' - ;; - - *) - can_build_shared=no - ;; - esac -fi - -if test -n "$pic_flag"; then - echo "$ac_t$pic_flag" 1>&6 - - # Check to make sure the pic_flag actually works. - echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $pic_flag -DPIC" - echo "$progname:717: checking if $compiler PIC flag $pic_flag works" >&5 - if { (eval echo $progname:718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - case "$host_os" in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then they - # create non-PIC objects. So, if there were any warnings, we assume that - # PIC is not supported. - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - can_build_shared=no - pic_flag= - else - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - fi - ;; - *) - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - ;; - esac - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - can_build_shared=no - pic_flag= - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - echo "$ac_t"none 1>&6 -fi - -# Check to see if options -o and -c are simultaneously supported by compiler -echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6 -$rm conftest* -echo "int some_variable = 0;" > conftest.c -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -c -o conftest2.o" -echo "$progname:760: checking if $compiler supports -c -o file.o" >&5 -if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest2.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_c_o=no - else - echo "$ac_t"yes 1>&6 - compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_c_o=no - echo "$ac_t"no 1>&6 -fi -CFLAGS="$save_CFLAGS" -$rm conftest* - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - echo "$progname:788: checking if $compiler supports -c -o file.lo" >&5 -if { (eval echo $progname:789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_o_lo=no - else - echo "$ac_t"yes 1>&6 - compiler_o_lo=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_o_lo=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$ac_t$hard_links" 1>&6 - $rm conftest* - if test "$hard_links" = no; then - echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 - need_locks=warn - fi -else - need_locks=no -fi - -if test "$with_gcc" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c" - echo "$progname:840: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 - if { (eval echo $progname:841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_rtti_exceptions=no - else - echo "$ac_t"yes 1>&6 - compiler_rtti_exceptions=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_rtti_exceptions=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi - -fi - -# Check for any special shared library compilation flags. -if test -n "$special_shlib_compile_flags"; then - echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : - else - echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 - can_build_shared=no - fi -fi - -echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 -$rm conftest* -echo 'main(){return(0);}' > conftest.c -save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $link_static_flag" -echo "$progname:884: checking if $compiler static flag $link_static_flag works" >&5 -if { (eval echo $progname:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - echo "$ac_t$link_static_flag" 1>&6 -else - echo "$ac_t"none 1>&6 - link_static_flag= -fi -LDFLAGS="$save_LDFLAGS" -$rm conftest* - -if test -z "$LN_S"; then - # Check to see if we can use ln -s, or we need hard links. - echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 - $rm conftestdata - if ln -s X conftestdata 2>/dev/null; then - $rm conftestdata - LN_S="ln -s" - else - LN_S=ln - fi - if test "$LN_S" = "ln -s"; then - echo "$ac_t"yes 1>&6 - else - echo "$ac_t"no 1>&6 - fi -fi - -# Make sure LD is an absolute path. -if test -z "$LD"; then - ac_prog=ld - if test "$with_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 - echo "$progname:917: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we are not using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld... $ac_c" 1>&6 - echo "$progname:941: checking for GNU ld" >&5 - else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 - echo "$progname:944: checking for non-GNU ld" >&5 - fi - - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then - LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" - fi - - if test -n "$LD"; then - echo "$ac_t$LD" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$LD"; then - echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 - exit 1 - fi -fi - -# Check to see if it really is or is not GNU ld. -echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 -# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - with_gnu_ld=yes -else - with_gnu_ld=no -fi -echo "$ac_t$with_gnu_ld" 1>&6 - -# See if the linker supports building shared libraries. -echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -always_export_symbols=no -export_symbols_cmds='$NM $libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms= - -case "$host_os" in -cygwin* | mingw*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$with_gcc" != yes; then - with_gnu_ld=no - fi - ;; - -freebsd2* | sunos4*) - exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - ;; - -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case "$host_os" in - aix3* | aix4*) - # On AIX, the GNU linker is very broken - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' - wlarc= - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - export_symbols_cmds='rm -f $objdir/$soname-ltdll.c~ - sed -e "/^# \/\* ltdll.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ - (cd $objdir && $CC -c $soname-ltdll.c)~ - $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols' - - archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~ - _lt_hint=1; - for symbol in `cat $export_symbols`; do - echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def; - _lt_hint=`expr 1 + \$_lt_hint`; - done~ - $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts' - - old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case "$host_os" in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$with_gcc" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4*) - allow_undefined_flag= - if test "$with_gcc" = yes; then - if strings `${CC} -print-prog-name=collect2` | \ - grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - fi - archive_cmds='$CC -shared ${wl}-bnoentry -o $objdir/$soname $libobjs $deplibs $linkopts' - else - always_export_symbols=yes - archive_expsym_cmds='$CC -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bM:SRE ${wl}-bnoentry' - hardcode_direct=yes - fi - hardcode_minus_L=yes - # Though LIBPATH variable hardcodes shlibpath into executable, - # it doesn't affect searching for -l* libraries; this confuses - # tests in mdemo. - hardcode_shlibpath_var=unsupported - hardcode_libdir_flag_spec='-L$libdir' - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - - cygwin* | mingw*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs' - fix_srcfile_path='`cygpath -w $srcfile`' - ;; - - freebsd1*) - ld_shlibs=no - can_build_shared=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_minus_L=no # verified on 2.2.6 - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - ;; - - hpux9*) - archive_cmds='$rm $objdir/$soname~$LD -b +s +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10* | hpux11*) - archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$with_gcc" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF - fi - hardcode_libdir_flag_spec='${wl}-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - openbsd*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' - ;; - - osf3* | osf4*) - if test "$with_gcc" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - ;; - - solaris*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - ;; - - sunos4*) - # Why do we need -Bstatic? To avoid inter-library dependencies, maybe... - if test "$with_gcc" = yes; then - # Use -fPIC here because libgcc is multilibbed - archive_cmds='$CC -shared ${wl}-Bstatic -fPIC -o $lib $libobjs $deplibs $linkopts' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - can_build_shared=no - ;; - esac -fi -echo "$ac_t$ld_shlibs" 1>&6 - -if test -z "$NM"; then - echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 - case "$NM" in - /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path. - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -p" - break - else - NM=${NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$NM" && NM=nm - ;; - esac - echo "$ac_t$NM" 1>&6 -fi - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Define system-specific variables. -case "$host_os" in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris*) - symcode='[BDT]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - $rm conftest* - cat > conftest.c <&5 - if { (eval echo $progname:1448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then - # Now try to grab the symbols. - nlist=conftest.nm - if { echo "$progname:1451: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then - - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c' - - cat <> conftest.c -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$objext conftestm.$objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftestm.$objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo $progname:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - pipe_works=yes - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - LIBS="$save_LIBS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - $rm conftest* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - global_symbol_pipe= - fi -done -echo "$ac_t$pipe_works" 1>&6 - -if test -z "$global_symbol_pipe"; then - global_symbol_to_cdecl= -fi - -# Check hardcoding attributes. -echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && \ - test "$hardcode_minus_L" != no && \ - test "$hardcode_shlibpath_var" != no; then - - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$ac_t$hardcode_action" 1>&6 - - -reload_flag= -reload_cmds='$LD$reload_flag -o $output$reload_objs' -echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 -# PORTME Some linkers may need a different reload flag. -reload_flag='-r' -echo "$ac_t$reload_flag" 1>&6 -test -n "$reload_flag" && reload_flag=" $reload_flag" - -# PORTME Fill in your ld.so characteristics -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -file_magic_cmd= -file_magic_test_file= -deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [regex]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. -echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 -case "$host_os" in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4*) - version_type=linux - # AIX has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - # We preserve .a as extension for shared libraries though AIX4.2 - # and later linker supports .so - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a' - shlibpath_var=LIBPATH - deplibs_check_method=pass_all - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - library_names_spec='${libname}.so$major ${libname}.so' - soname_spec='${libname}.so' - finish_cmds='PATH="$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - deplibs_check_method='file_magic ELF 32-bit LSB shared object' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw*) - version_type=windows - if test "$with_gcc" = yes; then - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' - else - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - fi - dynamic_linker='Win32 ld.exe' - deplibs_check_method='file_magic file format pei*-i386.*architecture: i386' - file_magic_cmd='objdump -f' - need_lib_prefix=no - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case "$version_type" in - freebsd-elf*) - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /usr/lib/libc.so*` - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - deplibs_check_method=unknown - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - finish_cmds='PATH="$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -gnu*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5*) - version_type=irix - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" # or should it be pass_all? - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib/libc.so*` - shlibpath_overrides_runpath=no - ;; - -irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - case "$LD" in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - # even though /usr/local/lib is always searched, the man-page says - # shared libraries should not be installed there if they use an ABI - # different from -32, so we'd better not search for shared libraries - # there either - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" # or should it be pass_all? - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib${libsuff}/libc.so*` - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - - if test -f /lib/ld.so.1; then - dynamic_linker='GNU ld.so' - else - # Only the GNU ld.so supports shared libraries on MkLinux. - case "$host_cpu" in - powerpc*) dynamic_linker=no ;; - *) dynamic_linker='Linux ld.so' ;; - esac - fi - ;; - -netbsd*) - version_type=sunos - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - ;; - -openbsd*) - version_type=sunos - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - need_version=no - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4*) - version_type=osf - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - # deplibs_check_method='pass_all' - # Although pass_all appears to work, it copies symbols from static libraries - # into shared ones and exports them. So, when a program is linked with two - # or more libraries that have got copies of the same symbols, link fails - # This was only tested on osf4: - deplibs_check_method='file_magic COFF format alpha shared library' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib" - file_magic_cmd=/usr/bin/file - file_magic_test_file=/lib/libc.so - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case "$host_vendor" in - ncr) - deplibs_check_method='pass_all' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$ac_t$dynamic_linker" 1>&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 - -if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then - case "$deplibs_check_method" in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac -fi - -echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - test "$enable_shared" = yes && enable_static=no - ;; -esac - -echo "$ac_t$enable_shared" 1>&6 - -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes - -echo "checking whether to build static libraries... $enable_static" 1>&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -echo $ac_n "checking for objdir... $ac_c" 1>&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$ac_t$objdir" 1>&6 - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else -if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then - lt_cv_dlopen=no lt_cv_dlopen_libs= -echo $ac_n "checking for dlopen""... $ac_c" 1>&6 -echo "$progname:1977: checking for dlopen" >&5 -if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -dlopen(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_dlopen=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_dlopen=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 -echo "$progname:2022: checking for dlopen in -ldl" >&5 -ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldl $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 -echo "$progname:2059: checking for dld_link in -ldld" >&5 -ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldld $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for shl_load""... $ac_c" 1>&6 -echo "$progname:2096: checking for shl_load" >&5 -if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -shl_load(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_shl_load=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_shl_load=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="shl_load" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for LoadLibrary""... $ac_c" 1>&6 -echo "$progname:2141: checking for LoadLibrary" >&5 -if eval "test \"`echo '$''{'ac_cv_func_LoadLibrary'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char LoadLibrary(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_LoadLibrary) || defined (__stub___LoadLibrary) -choke me -#else -LoadLibrary(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_LoadLibrary=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_LoadLibrary=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'LoadLibrary`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="LoadLibrary" -else - echo "$ac_t""no" 1>&6 -fi - - -fi - - -fi - - -fi - - -fi - -fi - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - fi - - case "$lt_cv_dlopen" in - dlopen) -for ac_hdr in dlfcn.h; do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "$progname:2210: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -int fnord = 0; -EOF -ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo $progname:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi -done - - if test "x$ac_cv_header_dlfcn_h" = xyes; then - CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - fi - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2248: checking whether a program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self=cross - else - cat > conftest.c < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) exit(0); } exit(1); } - -EOF -if { (eval echo $progname:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self" 1>&6 - - if test "$lt_cv_dlopen_self" = yes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2321: checking whether a statically linked program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self_static=cross - else - cat > conftest.c < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) exit(0); } exit(1); } - -EOF -if { (eval echo $progname:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self_static=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self_static=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 -fi - ;; - esac - - case "$lt_cv_dlopen_self" in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case "$lt_cv_dlopen_self_static" in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - -# Copy echo and quote the copy, instead of the original, because it is -# used later. -ltecho="$echo" -if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ltecho="$CONFIG_SHELL \$0 --fallback-echo" -fi -LTSHELL="$SHELL" - -LTCONFIG_VERSION="$VERSION" - -# Only quote variables if we're using ltmain.sh. -case "$ltmain" in -*.sh) - # Now quote all the things that may contain metacharacters. - for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ - old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \ - file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case "$var" in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case "$ltecho" in - *'\$0 --fallback-echo"') - ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - - trap "$rm \"$ofile\"; exit 1" 1 2 15 - echo "creating $ofile" - $rm "$ofile" - cat < "$ofile" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi - -### BEGIN LIBTOOL CONFIG -EOF - cfgfile="$ofile" - ;; - -*) - # Double-quote the variables that need it (for aesthetics). - for var in old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ - old_LN_S old_DLLTOOL old_AS; do - eval "$var=\\\"\$var\\\"" - done - - # Just create a config file. - cfgfile="$ofile.cfg" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - echo "creating $cfgfile" - $rm "$cfgfile" - cat < "$cfgfile" -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -EOF - ;; -esac - -cat <> "$cfgfile" -# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ -# LD=$old_LD NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\ -# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\ -# $0$ltconfig_args -# -# Compiler and other test output produced by $progname, useful for -# debugging $progname, is in ./config.log if it exists. - -# The version of $progname that generated this script. -LTCONFIG_VERSION=$LTCONFIG_VERSION - -# Shell to use when invoking shell scripts. -SHELL=$LTSHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$ltecho - -# The archiver. -AR=$AR - -# The default C compiler. -CC=$CC - -# The linker used to build libraries. -LD=$LD - -# Whether we need hard or soft links. -LN_S=$LN_S - -# A BSD-compatible nm program. -NM=$NM - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$reload_flag -reload_cmds=$reload_cmds - -# How to pass a linker flag through the compiler. -wl=$wl - -# Object file suffix (normally "o"). -objext="$objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Additional compiler flags for building library objects. -pic_flag=$pic_flag - -# Does compiler simultaneously support -c and -o options -compiler_c_o=$compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$RANLIB -old_archive_cmds=$old_archive_cmds -old_postinstall_cmds=$old_postinstall_cmds -old_postuninstall_cmds=$old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$old_archive_from_new_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$archive_cmds -archive_expsym_cmds=$archive_expsym_cmds -postinstall_cmds=$postinstall_cmds -postuninstall_cmds=$postuninstall_cmds - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$deplibs_check_method - -# Command to use when deplibs_check_method == file_magic -file_magic_cmd=$file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$global_symbol_to_cdecl - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required -always_export_symbols=$always_export_symbols - -# The command to extract exported symbols -export_symbols_cmds=$export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols -exclude_expsyms=$exclude_expsyms - -# Symbols that must always be exported -include_expsyms=$include_expsyms - -EOF - -case "$ltmain" in -*.sh) - echo '### END LIBTOOL CONFIG' >> "$ofile" - echo >> "$ofile" - case "$host_os" in - aix3*) - cat <<\EOF >> "$ofile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "${COLLECT_NAMES+set}" != set; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # Append the ltmain.sh script. - cat "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) - - chmod +x "$ofile" - ;; - -*) - # Compile the libtool program. - echo "FIXME: would compile $ltmain" - ;; -esac - -test -n "$cache_file" || exit 0 - -# AC_CACHE_SAVE -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/host/ltmain.sh b/host/ltmain.sh deleted file mode 100644 --- a/host/ltmain.sh +++ /dev/null @@ -1,3779 +0,0 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -# The name of this program. -progname=`$echo "$0" | sed 's%^.*/%%'` -modename="$progname" - -# Constants. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.2f -TIMESTAMP=" (1.385 1999/03/15 17:24:54)" - -default_mode= -help="Try \`$progname --help' for more information." -magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -SP2NL='tr \040 \012' -NL2SP='tr \012 \040' - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -# We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi - -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - echo "$modename: not configured to build any kind of library" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" - -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case "$arg" in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case "$arg" in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 - ;; - - --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --quiet | --silent) - show=: - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case "$nonopt" in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case "$arg" in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case "$mode" in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - # Accept any command-line options. - case "$arg" in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - esac - - case "$user_target" in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case "$user_target" in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' - case "$libobj" in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case "$libobj" in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $libobj" - else - removelist="$libobj" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $pic_flag -DPIC $srcfile" - if test "$build_old_libs" = yes; then - lo_libobj="$libobj" - dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$libobj"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - - if test -d "$dir"; then - $show "$rm $libobj" - $run $rm $libobj - else - $show "$mkdir $dir" - $run $mkdir $dir - status=$? - if test $status -ne 0 && test ! -d $dir; then - exit $status - fi - fi - fi - if test "$compiler_o_lo" = yes; then - output_obj="$libobj" - command="$command -o $output_obj" - elif test "$compiler_c_o" = yes; then - output_obj="$obj" - command="$command -o $output_obj" - fi - - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi - - $show "$mv $libobj $obj" - if $run $mv $libobj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - - # Now arrange that obj and lo_libobj become the same file - $show "$LN_S $obj $lo_libobj" - if $run $LN_S $obj $lo_libobj; then - exit 0 - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - output_obj="$obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test x"$output_obj" != x"$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - fi - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $rm "$lockfile" - fi - - exit 0 - ;; - - # libtool link mode - link) - modename="$modename: link" - C_compiler="$CC" # save it, to compile generated C sources - CC="$nonopt" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invokation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i&2 - fi - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test $# -gt 0; do - arg="$1" - shift - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case "$prev" in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case "$arg" in - *.la | *.lo) ;; # We handle these cases below. - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - fi - prev= - continue - ;; - *) - dlprefiles="$dlprefiles $arg" - test "$prev" = dlfiles && dlfiles="$dlfiles $arg" - prev= - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath) - rpath="$rpath $arg" - prev= - continue - ;; - xrpath) - xrpath="$xrpath $arg" - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi - - prevarg="$arg" - - case "$arg" in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - dlopen_self=$dlopen_self_static - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - if test "$export_dynamic" != yes; then - export_dynamic=yes - if test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - else - arg= - fi - fi - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: cannot have more than one -exported-symbols" - exit 1 - fi - if test "$arg" = "-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'` - case "$dir" in - /* | [A-Za-z]:[/\\]*) - # Add the corresponding hardcode_libdir_flag, if it is not identical. - ;; - *) - $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2 - exit 1 - ;; - esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; - esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; - esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; - esac - ;; - esac - ;; - - -l*) - deplibs="$deplibs $arg" - ;; - - -module) - if test "$module" != yes; then - module=yes - if test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - else - arg= - fi - fi - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - xrpath="$xrpath "`$echo "X$arg" | $Xsed -e 's/^-R//'` - continue - ;; - - -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - dlopen_self=$dlopen_self_static - fi - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - fi - libobjs="$libobjs $arg" - ;; - - *.la) - # A libtool-controlled library. - - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - fi - - if test -n "$dependency_libs"; then - # Extract -R from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" - continue - fi - - # This library was specified with -dlopen. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi - prev= - fi - - if test "$build_libtool_libs" = yes && test -n "$library_names"; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # We need an absolute path. - case "$dir" in - /* | [A-Za-z]:[/\\]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$libdir'" 1>&2 - exit 1 - fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" - ;; - esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - relink) - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - fi - else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" - fi - fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - esac - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - case "$output" in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles"; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - ;; - - *.la) - # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 - fi - - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles"; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - libext=al - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - dependency_libs="$deplibs" - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case "$version_type" in - none) ;; - - irix) - major=`expr $current - $age + 1` - versuffix="$major.$revision" - verstring="sgi$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test $loop != 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" - done - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. - major=`expr $current - $age` - versuffix="-$major-$age-$revision" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - verstring="0.0" - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac - fi - - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - if test "$build_libtool_libs" = yes; then - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case "$deplibs_check_method" in - pass_all) - newdeplibs=$deplibs - ;; # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potlib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in - /*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" \ - | sed 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - dlname= - library_names= - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - fi - fi - fi - - # test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - deplibs=$newdeplibs - # Done checking deplibs! - - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) incase we are running --disable-static - for obj in $libobjs; do - oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"` - test -f $oldobj || ${LN_S} $obj $oldobj - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - if test -n "$whole_archive_flag_spec"; then - if test -n "$convenience"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - else - for xlib in $convenience; do - # Extract the objects. - xdir="$xlib"x - generated="$generated $xdir" - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x ../$xlib)" - $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - - linkopts="$linkopts $flag" - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles"; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case "$output" in - *.lo) - if test -n "$objs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` - - output="$obj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - test -z "$libobj" && exit 0 - - if test "$build_libtool_libs" != yes; then - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs" - output="$libobj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - $show "$LN_S $obj $libobj" - $run $LN_S $obj $libobj || exit $? - fi - - exit 0 - ;; - - # Anything else should be a program. - *) - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - if test "$dlself" = yes && test "$export_dynamic" = no; then - $echo "$modename: error: \`-dlopen self' requires \`-export-dynamic'" 1>&2 - exit 1 - fi - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" = yes; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case "$dlsyms" in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$objdir/${output}.nm" - - if test -d $objdir; then - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - else - $show "$mkdir $objdir" - $run $mkdir $objdir - status=$? - if test $status -ne 0 && test ! -d $objdir; then - exit $status - fi - fi - - # Parse the name list into a source file. - $show "creating $objdir/$dlsyms" - - $echo > "$objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$objdir/$output.exp" - $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run $rm $export_symbols - $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$objdir/$output.exp"' - $run eval 'grep -f "$objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{\ -" - - sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ - -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ - < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr_t) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case "$host" in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - exit $? - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case "$dir" in - /* | [A-Za-z]:[/\\]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - # AGH! Flame the AIX and HP-UX people for me, will ya? - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $objdir; then - exit $status - fi - fi - - # Delete the old output file. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in - /* | [A-Za-z]:[/\\]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname' - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : - else - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` - fi - addlibs="$old_convenience" - fi - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - xdir="$xlib"x - generated="$generated $xdir" - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x ../$xlib)" - $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - eval cmds=\"$old_archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case "$output" in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi - - # Only create the output if not a dry run. - if test -z "$run"; then - $echo > $output "\ -# $output - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP - -# The name that we can dlopen(3). -dlname='$dlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=no - -# Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" - - $rm "$output_objdir/$outputname"i - sed 's/^installed=no$/installed=yes/' \ - < "$output" > "$output_objdir/$outputname"i || exit 1 - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case "$arg" in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case "$destdir" in - /* | [A-Za-z]:[/\\]*) ;; - *) - for file in $files; do - case "$file" in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case "$file" in - *.a | *.lib) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? - test "X$dlname" = "X$realname" && dlname= - - if test $# -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - test "X$dlname" = "X$linkname" && dlname= - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - if test -n "$dlname"; then - # Install the dynamically-loadable library. - $show "$install_prog $dir/$dlname $destdir/$dlname" - $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $? - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - if test ! -f "$instname"; then - # Just in case it was removed... - $show "Creating $instname" - $rm "$instname" - sed 's/^installed=no$/installed=yes/' "$file" > "$instname" - fi - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case "$destfile" in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.o | *.obj) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= - relink_command= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $link_against_libtool_libs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case "$lib" in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes; then - outputname="/tmp/$$-$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && $rm $outputname - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec $SHELL $0 --finish$current_libdirs - exit 1 - fi - - exit 0 - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case "$file" in - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case "$file" in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now actually exec the command. - eval "exec \$cmd$args" - - $echo "$modename: cannot exec \$cmd$args" - exit 1 - else - # Display what would be done. - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" - rm="$nonopt" - files= - - for arg - do - case "$arg" in - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - rmfiles="$file" - - case "$name" in - *.la) - # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $dir/$n" - test "X$n" = "X$dlname" && dlname= - done - test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname" - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" - - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - # FIXME: should reinstall the best remaining shared library. - fi - ;; - - *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" - fi - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - - *) - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - esac - done - exit 0 - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 -fi # test -z "$show_help" - -# We need to display help for each of the modes. -case "$mode" in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/host/missing b/host/missing deleted file mode 100644 --- a/host/missing +++ /dev/null @@ -1,188 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. -# Franc,ois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -case "$1" in - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - - aclocal) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`configure.in'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`configure.in'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`configure.in'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in` - if test -z "$files"; then - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in` - test -z "$files" || files="$files.in" - else - files=`echo "$files" | sed -e 's/:/ /g'` - fi - test -z "$files" && files="config.h.in" - touch $files - ;; - - automake) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print \ - | sed 's/^\(.*\).am$/touch \1.in/' \ - | sh - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 diff --git a/host/mkinstalldirs b/host/mkinstalldirs deleted file mode 100644 --- a/host/mkinstalldirs +++ /dev/null @@ -1,36 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Last modified: 1994-03-25 -# Public domain - -errstatus=0 - -for file in ${1+"$@"} ; do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d in ${1+"$@"} ; do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" 1>&2 - mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$? - fi - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# mkinstalldirs ends here diff --git a/host/tools/Utils/ChangeLog b/host/tools/Utils/ChangeLog --- a/host/tools/Utils/ChangeLog +++ b/host/tools/Utils/ChangeLog @@ -1,3 +1,8 @@ +2002-08-03 Bart Veer + + * common/Makefile.am, common/configure.in, common/acinclude.m4: + Rework host-side autoconf support + 2000-09-15 Jesper Skov * common/Makefile.in: Regenerated. diff --git a/host/tools/Utils/common/Makefile.in b/host/tools/Utils/common/Makefile.in --- a/host/tools/Utils/common/Makefile.in +++ b/host/tools/Utils/common/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -86,18 +86,28 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ RANLIB = @RANLIB@ VERSION = @VERSION@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ AUTOMAKE_OPTIONS = 1.3 cygnus SUBDIRS = @@ -109,7 +119,7 @@ libutils_a_SOURCES = Collections.cpp Sub eCosStd.cpp eCosTrace.cpp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../acsupport/mkinstalldirs CONFIG_CLEAN_FILES = LIBRARIES = $(noinst_LIBRARIES) @@ -235,7 +245,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ diff --git a/host/tools/Utils/common/acinclude.m4 b/host/tools/Utils/common/acinclude.m4 --- a/host/tools/Utils/common/acinclude.m4 +++ b/host/tools/Utils/common/acinclude.m4 @@ -41,4 +41,4 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../../../acinclude.m4) +sinclude(../../../../acsupport/acinclude.m4) diff --git a/host/tools/Utils/common/aclocal.m4 b/host/tools/Utils/common/aclocal.m4 --- a/host/tools/Utils/common/aclocal.m4 +++ b/host/tools/Utils/common/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -53,11 +53,11 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../../../acinclude.m4) +sinclude(../../../../acsupport/acinclude.m4) # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then @@ -77,7 +77,7 @@ fi]) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -105,7 +105,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -146,7 +146,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -165,7 +165,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, diff --git a/host/tools/Utils/common/configure b/host/tools/Utils/common/configure --- a/host/tools/Utils/common/configure +++ b/host/tools/Utils/common/configure @@ -15,9 +15,9 @@ ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help - --enable-debug do a debug rather than a release build" + --enable-debug do a debug rather than a release build" ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" + --enable-ansi do an ANSI rather than a unicode build" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -530,7 +530,7 @@ fi ac_aux_dir= -for ac_dir in ../../.. $srcdir/../../..; do +for ac_dir in ../../../../acsupport $srcdir/../../../../acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -542,7 +542,7 @@ for ac_dir in ../../.. $srcdir/../../..; fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in ../../.. $srcdir/../../.." 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in ../../../../acsupport $srcdir/../../../../acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -1226,10 +1226,61 @@ else fi fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat > conftest.$ac_ext < +$ac_declaration +int main() { +exit (42); +; return 0; } +EOF +if { (eval echo configure:1248: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + continue +fi +rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1233: checking for $ac_word" >&5 +echo "configure:1284: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1257,13 +1308,13 @@ else fi echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1261: checking for object suffix" >&5 +echo "configure:1312: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1267: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1318: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1281,12 +1332,12 @@ OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1285: checking for Cygwin environment" >&5 +echo "configure:1336: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1352: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1314,19 +1365,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1318: checking for mingw32 environment" >&5 +echo "configure:1369: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1381: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1345,7 +1396,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=y echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1349: checking for executable suffix" >&5 +echo "configure:1400: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1355,7 +1406,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; @@ -1376,17 +1427,39 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT + ecos_CFLAGS="" + ecos_CXXFLAGS="" + ecos_LDADD="" + ecos_INCLUDES="" + ecos_LIBS="" + + + + + + + + echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1384: checking "for Visual C++"" >&5 +echo "configure:1448: checking "for Visual C++"" >&5 MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" + CXX="cl" + + + + if test "${MSVC}" = "yes" ; then + MSVC_SRCDIR=`cygpath -w ${MSVC_SRCDIR} | tr \\\\\\\\ /` fi - if test "${CXX}" = "cl" ; then - MSVC="yes" + + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${msvc_srcdir}\"" + ecos_LDADD="-link" + ecos_LIBS="advapi32.lib" fi @@ -1397,56 +1470,76 @@ else MSVC_TRUE='#' MSVC_FALSE= fi - echo "$ac_t""${MSVC}" 1>&6 + if test "${MSVC}" = "yes" ; then + echo "$ac_t""unfortunately yes" 1>&6 + else + echo "$ac_t""no" 1>&6 + fi + echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1409: checking "the default compiler flags"" >&5 +echo "configure:1487: checking "the default compiler flags"" >&5 - cygflags_enable_debug="no" + ecosflags_enable_debug="no" # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; + yes) ecosflags_enable_debug="yes" ;; + *) ecosflags_enable_debug="no" ;; esac fi - cygflags_enable_ansi="no" + ecosflags_enable_ansi="no" if test "${MSVC}" = "yes" ; then # Check whether --enable-ansi or --disable-ansi was given. if test "${enable_ansi+set}" = set; then enableval="$enable_ansi" case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; + yes) ecosflags_enable_ansi="yes" ;; + *) ecosflags_enable_ansi="no" ;; esac fi fi - if test "${GCC}" = "yes" ; then - CC="$CC -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - CXX="$CXX -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" elif test "${MSVC}" = "yes" ; then - CC="$CC -nologo -W3" - CXX="$CXX -nologo -W3 -GR -GX" - if test "${cygflags_enable_debug}" = "yes" ; then - CC="$CC -MDd -Zi" - CXX="$CXX -MDd -Zi" - else - CC="$CC -MD -O2" - CXX="$CXX -MD -O2" - fi + ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" else { echo "configure: error: "default flags for ${CC} are not known"" 1>&2; exit 1; } fi + + if test "${ecosflags_enable_debug}" = "yes" ; then + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -g -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" + elif test "${MSVC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" + fi + else + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" + elif test "${MSVC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" + fi + fi + + CFLAGS="${ac_save_CFLAGS}" + CXXFLAGS="${ac_save_CXXFLAGS}" + echo "$ac_t""done" 1>&6 @@ -1619,6 +1712,12 @@ s%@CXX@%$CXX%g s%@RANLIB@%$RANLIB%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g +s%@ecos_CFLAGS@%$ecos_CFLAGS%g +s%@ecos_CXXFLAGS@%$ecos_CXXFLAGS%g +s%@ecos_LDADD@%$ecos_LDADD%g +s%@ecos_INCLUDES@%$ecos_INCLUDES%g +s%@ecos_LIBS@%$ecos_LIBS%g +s%@MSVC_SRCDIR@%$MSVC_SRCDIR%g s%@MSVC_TRUE@%$MSVC_TRUE%g s%@MSVC_FALSE@%$MSVC_FALSE%g diff --git a/host/tools/Utils/common/configure.in b/host/tools/Utils/common/configure.in --- a/host/tools/Utils/common/configure.in +++ b/host/tools/Utils/common/configure.in @@ -42,7 +42,7 @@ dnl ==================================== AC_INIT(eCosStd.cpp) dnl Pick up the support files from the top-level of the source tree -AC_CONFIG_AUX_DIR(../../..) +AC_CONFIG_AUX_DIR(../../../../acsupport) dnl Other standard options. AC_CANONICAL_HOST @@ -57,7 +57,7 @@ AC_PROG_CXX AC_PROG_RANLIB AC_OBJEXT AC_EXEEXT -CYG_AC_PROG_MSVC -CYG_AC_PROG_STANDARD_COMPILER_FLAGS +ECOS_PROG_MSVC +ECOS_PROG_STANDARD_COMPILER_FLAGS AC_OUTPUT(Makefile) diff --git a/host/tools/configtool/ChangeLog b/host/tools/configtool/ChangeLog --- a/host/tools/configtool/ChangeLog +++ b/host/tools/configtool/ChangeLog @@ -1,3 +1,10 @@ +2002-08-03 Bart Veer + + * standalone/common/Makefile.am, configure.in, acinclude.m4: + Rework host-side autoconf support + + * common/common/build.cxx: fix typo + 2002-02-08 Julian Smart * common/common/build.cxx: Added two missing backslashes diff --git a/host/tools/configtool/common/common/build.cxx b/host/tools/configtool/common/common/build.cxx --- a/host/tools/configtool/common/common/build.cxx +++ b/host/tools/configtool/common/common/build.cxx @@ -1,7 +1,7 @@ //####COPYRIGHTBEGIN#### // // ---------------------------------------------------------------------------- -// Copyright (C) 1998, 1999, 2000 Red Hat, Inc. +// Copyright (C) 1998, 1999, 2000, 2002 Red Hat, Inc. // // This program is part of the eCos host tools. // @@ -217,7 +217,7 @@ std::string cygpath (const std::string i unsigned int n = 2; unsigned int i; - if (path[n] == '\\' || path[n] == '//') + if (path[n] == '\\' || path[n] == '/') n ++; for (i = n; i < path.size(); i++) diff --git a/host/tools/configtool/standalone/common/Makefile.am b/host/tools/configtool/standalone/common/Makefile.am --- a/host/tools/configtool/standalone/common/Makefile.am +++ b/host/tools/configtool/standalone/common/Makefile.am @@ -7,34 +7,35 @@ ## ## ===================================================================== #####ECOSHOSTGPLCOPYRIGHTBEGIN#### -# ------------------------------------------- -# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +## ------------------------------------------- +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # # This file is part of the eCos host tools. # -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) # any later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. -# +# # You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., +# this program; if not, write to the Free Software Foundation, Inc., # 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # -# ------------------------------------------- +## ------------------------------------------- #####ECOSHOSTGPLCOPYRIGHTEND#### ## ===================================================================== #######DESCRIPTIONBEGIN#### ## -## Author(s): bartv -## Contact(s): bartv -## Date: 1999/11/09 -## Version: 0.01 +## Author(s): bartv +## Contact(s): bartv +## Date: 1999/11/09 +## Version: 0.01 ## ######DESCRIPTIONEND#### ## ===================================================================== @@ -43,32 +44,29 @@ AUTOMAKE_OPTIONS = 1.3 cygnus SUBDIRS = ## Pick up compiler flags etc. from configury -INCLUDES = -I@cyg_ac_infra_incdir@ -I@cyg_ac_cdl_incdir@ -I@cyg_ac_tcl_incdir@ -I@win_srcdir@/../../common/common -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ - +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ if MSVC -LIBS = @cyg_ac_cdl_libraries@ @cyg_ac_infra_libraries@ @cyg_ac_tcl_libs@ \ - -link -libpath=@cyg_ac_infra_libdir@ -libpath=@cyg_ac_cdl_libdir@ -libpath=@cyg_ac_tcl_libdir@ + INCLUDES = @ecos_INCLUDES@ -I@MSVC_SRCDIR@/../../common/common else -LIBS = -L@cyg_ac_infra_libdir@ -L@cyg_ac_cdl_libdir@ -L@cyg_ac_tcl_libdir@ \ - $(foreach x,@cyg_ac_cdl_libraries@,-l$x) \ - $(foreach x,@cyg_ac_infra_libraries@,-l$x) \ - @cyg_ac_tcl_libs@ + INCLUDES = @ecos_INCLUDES@ -I$(srcdir)/../../common/common endif +LIBS = @ecos_LIBS@ @ecos_LDADD@ -BUILT_SOURCES = build.cxx flags.cxx -bin_PROGRAMS = ecosconfig +BUILT_SOURCES = build.cxx flags.cxx +bin_PROGRAMS = ecosconfig ecosconfig_SOURCES = ecosconfig.cxx cdl_exec.cxx build.cxx flags.cxx if MSVC -ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/cdl.lib @cyg_ac_infra_libdir@/cyginfra.lib +ecosconfig_DEPENDENCIES = @ecos_libcdl_libdir@/cdl.lib @ecos_infra_libdir@/cyginfra.lib else -ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/libcdl.a @cyg_ac_infra_libdir@/libcyginfra.a +ecosconfig_DEPENDENCIES = @ecos_libcdl_libdir@/libcdl.a @ecos_infra_libdir@/libcyginfra.a endif noinst_HEADERS = cdl_exec.hxx ecosconfig.hxx +## Unfortunately some of the required sources live elsewhere, yet do not get built +## into a library. Copy them into the build tree. build.cxx: ../../common/common/build.cxx $(INSTALL) $< $@ diff --git a/host/tools/configtool/standalone/common/Makefile.in b/host/tools/configtool/standalone/common/Makefile.in --- a/host/tools/configtool/standalone/common/Makefile.in +++ b/host/tools/configtool/standalone/common/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,26 +11,25 @@ # PARTICULAR PURPOSE. #####ECOSHOSTGPLCOPYRIGHTBEGIN#### -# ------------------------------------------- -# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +# Copyright (C) 2002 Bart Veer +# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. # # This file is part of the eCos host tools. # -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) # any later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. -# +# # You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., +# this program; if not, write to the Free Software Foundation, Inc., # 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # -# ------------------------------------------- #####ECOSHOSTGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -86,45 +85,44 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ VERSION = @VERSION@ -cyg_CFLAGS = @cyg_CFLAGS@ -cyg_CXXFLAGS = @cyg_CXXFLAGS@ -cyg_ac_cdl_incdir = @cyg_ac_cdl_incdir@ -cyg_ac_cdl_libdir = @cyg_ac_cdl_libdir@ -cyg_ac_cdl_libraries = @cyg_ac_cdl_libraries@ -cyg_ac_infra_incdir = @cyg_ac_infra_incdir@ -cyg_ac_infra_libdir = @cyg_ac_infra_libdir@ -cyg_ac_infra_libraries = @cyg_ac_infra_libraries@ -cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@ -cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@ -cyg_ac_tcl_libs = @cyg_ac_tcl_libs@ -cyg_ac_tcl_version = @cyg_ac_tcl_version@ -cyg_ac_tk_libs = @cyg_ac_tk_libs@ -win_srcdir = @win_srcdir@ +ecos_CFLAGS = @ecos_CFLAGS@ +ecos_CXXFLAGS = @ecos_CXXFLAGS@ +ecos_INCLUDES = @ecos_INCLUDES@ +ecos_LDADD = @ecos_LDADD@ +ecos_LIBS = @ecos_LIBS@ +ecos_infra_incdir = @ecos_infra_incdir@ +ecos_infra_libdir = @ecos_infra_libdir@ +ecos_libcdl_incdir = @ecos_libcdl_incdir@ +ecos_libcdl_libdir = @ecos_libcdl_libdir@ +ecos_tk_libs = @ecos_tk_libs@ AUTOMAKE_OPTIONS = 1.3 cygnus SUBDIRS = -INCLUDES = -I@cyg_ac_infra_incdir@ -I@cyg_ac_cdl_incdir@ -I@cyg_ac_tcl_incdir@ -I@win_srcdir@/../../common/common -AM_CFLAGS = @cyg_CFLAGS@ -AM_CXXFLAGS = @cyg_CXXFLAGS@ -@MSVC_TRUE@LIBS = @cyg_ac_cdl_libraries@ @cyg_ac_infra_libraries@ @cyg_ac_tcl_libs@ -link -libpath=@cyg_ac_infra_libdir@ -libpath=@cyg_ac_cdl_libdir@ -libpath=@cyg_ac_tcl_libdir@ -@MSVC_FALSE@LIBS = -L@cyg_ac_infra_libdir@ -L@cyg_ac_cdl_libdir@ -L@cyg_ac_tcl_libdir@ $(foreach x,@cyg_ac_cdl_libraries@,-l$x) $(foreach x,@cyg_ac_infra_libraries@,-l$x) @cyg_ac_tcl_libs@ +AM_CFLAGS = @ecos_CFLAGS@ +AM_CXXFLAGS = @ecos_CXXFLAGS@ +LIBS = @ecos_LIBS@ @ecos_LDADD@ BUILT_SOURCES = build.cxx flags.cxx bin_PROGRAMS = ecosconfig ecosconfig_SOURCES = ecosconfig.cxx cdl_exec.cxx build.cxx flags.cxx -@MSVC_TRUE@ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/cdl.lib @cyg_ac_infra_libdir@/cyginfra.lib -@MSVC_FALSE@ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/libcdl.a @cyg_ac_infra_libdir@/libcyginfra.a +@MSVC_TRUE@ecosconfig_DEPENDENCIES = @MSVC_TRUE@@ecos_libcdl_libdir@/cdl.lib @ecos_infra_libdir@/cyginfra.lib +@MSVC_FALSE@ecosconfig_DEPENDENCIES = @MSVC_FALSE@@ecos_libcdl_libdir@/libcdl.a @ecos_infra_libdir@/libcyginfra.a noinst_HEADERS = cdl_exec.hxx ecosconfig.hxx ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../acsupport/mkinstalldirs CONFIG_CLEAN_FILES = bin_PROGRAMS = ecosconfig$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) @@ -266,7 +264,7 @@ maintainer-clean-recursive: dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ + test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ @@ -459,6 +457,8 @@ installdirs-am installdirs mostlyclean-g clean-generic maintainer-clean-generic clean mostlyclean distclean \ maintainer-clean +@MSVC_TRUE@ INCLUDES = @ecos_INCLUDES@ -I@MSVC_SRCDIR@/../../common/common +@MSVC_FALSE@ INCLUDES = @ecos_INCLUDES@ -I$(srcdir)/../../common/common build.cxx: ../../common/common/build.cxx $(INSTALL) $< $@ diff --git a/host/tools/configtool/standalone/common/acinclude.m4 b/host/tools/configtool/standalone/common/acinclude.m4 --- a/host/tools/configtool/standalone/common/acinclude.m4 +++ b/host/tools/configtool/standalone/common/acinclude.m4 @@ -6,26 +6,25 @@ dnl acinclude.m4 dnl dnl ==================================================================== dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### -dnl ------------------------------------------- +dnl ------------------------------------------- dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl -dnl This program is free software; you can redistribute it and/or modify it -dnl under the terms of the GNU General Public License as published by the Free -dnl Software Foundation; either version 2 of the License, or (at your option) +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) dnl any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but WITHOUT -dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for dnl more details. -dnl +dnl dnl You should have received a copy of the GNU General Public License along with -dnl this program; if not, write to the Free Software Foundation, Inc., +dnl this program; if not, write to the Free Software Foundation, Inc., dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -dnl -dnl ------------------------------------------- +dnl ------------------------------------------- dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### @@ -41,4 +40,4 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../../../../acinclude.m4) +sinclude(../../../../../acsupport/acinclude.m4) diff --git a/host/tools/configtool/standalone/common/aclocal.m4 b/host/tools/configtool/standalone/common/aclocal.m4 --- a/host/tools/configtool/standalone/common/aclocal.m4 +++ b/host/tools/configtool/standalone/common/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -18,26 +18,25 @@ dnl acinclude.m4 dnl dnl ==================================================================== dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### -dnl ------------------------------------------- +dnl ------------------------------------------- dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl -dnl This program is free software; you can redistribute it and/or modify it -dnl under the terms of the GNU General Public License as published by the Free -dnl Software Foundation; either version 2 of the License, or (at your option) +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) dnl any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but WITHOUT -dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for dnl more details. -dnl +dnl dnl You should have received a copy of the GNU General Public License along with -dnl this program; if not, write to the Free Software Foundation, Inc., +dnl this program; if not, write to the Free Software Foundation, Inc., dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -dnl -dnl ------------------------------------------- +dnl ------------------------------------------- dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### @@ -53,11 +52,11 @@ dnl ==================================== dnl Access shared macros. dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not dnl incorporate the macro into aclocal.m4 -sinclude(../../../../acinclude.m4) +sinclude(../../../../../acsupport/acinclude.m4) # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then @@ -77,7 +76,7 @@ fi]) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -105,7 +104,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -146,7 +145,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -165,7 +164,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, diff --git a/host/tools/configtool/standalone/common/configure b/host/tools/configtool/standalone/common/configure --- a/host/tools/configtool/standalone/common/configure +++ b/host/tools/configtool/standalone/common/configure @@ -15,9 +15,35 @@ ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help - --enable-debug do a debug rather than a release build" + --enable-debug do a debug rather than a release build" +ac_help="$ac_help + --enable-ansi do an ANSI rather than a unicode build" +ac_help="$ac_help + --disable-asserts disable all assertions" +ac_help="$ac_help + --disable-preconditions disable a subset of the assertions" +ac_help="$ac_help + --disable-postconditions disable a subset of the assertions" +ac_help="$ac_help + --disable-invariants disable a subset of the assertions" +ac_help="$ac_help + --disable-loopinvariants disable a subset of the assertions" ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" + --disable-tracing disable tracing" +ac_help="$ac_help + --disable-fntracing disable function entry/exit tracing" +ac_help="$ac_help + --with-libcdl-header= location of eCos libcdl headers" +ac_help="$ac_help + --with-libcdl-lib= location of eCos libcdl library" +ac_help="$ac_help + --with-libcdl= location of eCos libcdl installation" +ac_help="$ac_help + --with-infra-header= location of eCos infrastructure headers" +ac_help="$ac_help + --with-infra-lib= location of eCos infrastructure library" +ac_help="$ac_help + --with-infra= location of eCos infrastructure installation" ac_help="$ac_help --with-tcl-version= version of Tcl to be used" ac_help="$ac_help @@ -538,7 +564,7 @@ fi ac_aux_dir= -for ac_dir in ../../../.. $srcdir/../../../..; do +for ac_dir in ../../../../../acsupport $srcdir/../../../../../acsupport; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -550,13 +576,54 @@ for ac_dir in ../../../.. $srcdir/../../ fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in ../../../../../acsupport $srcdir/../../../../../acsupport" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6 +echo "configure:589: checking that a separate build tree is being used" >&5 + ecos_cwd=`/bin/pwd` + if test "${srcdir}" = "." ; then + srcdir=${ecos_cwd} + fi + if test "${ecos_cwd}" = "${srcdir}" ; then + echo "$ac_t""no" 1>&6 + { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; } + else + echo "$ac_t""yes" 1>&6 + fi + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:608: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -569,7 +636,7 @@ ac_configure=$ac_aux_dir/configure # Thi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:573: checking for a BSD compatible install" >&5 +echo "configure:640: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -622,7 +689,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:626: checking whether build environment is sane" >&5 +echo "configure:693: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -679,7 +746,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:683: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:750: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -725,7 +792,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:729: checking for working aclocal" >&5 +echo "configure:796: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -738,7 +805,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:742: checking for working autoconf" >&5 +echo "configure:809: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -751,7 +818,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:755: checking for working automake" >&5 +echo "configure:822: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -764,7 +831,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:768: checking for working autoheader" >&5 +echo "configure:835: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -777,7 +844,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:781: checking for working makeinfo" >&5 +echo "configure:848: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -791,7 +858,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:795: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:862: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -814,37 +881,10 @@ fi - -# Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:825: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:848: checking for $ac_word" >&5 +echo "configure:888: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -874,7 +914,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:878: checking for $ac_word" >&5 +echo "configure:918: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -925,7 +965,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:929: checking for $ac_word" >&5 +echo "configure:969: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -957,7 +997,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:961: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1001: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -968,12 +1008,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 972 "configure" +#line 1012 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -999,12 +1039,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1003: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1043: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1008: checking whether we are using GNU C" >&5 +echo "configure:1048: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1013,7 +1053,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1017: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1032,7 +1072,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1036: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1076: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1068,7 +1108,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1072: checking for $ac_word" >&5 +echo "configure:1112: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1100,7 +1140,7 @@ test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1104: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:1144: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1111,12 +1151,12 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext << EOF -#line 1115 "configure" +#line 1155 "configure" #include "confdefs.h" int main(){return(0);} EOF -if { (eval echo configure:1120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1142,12 +1182,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1146: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1186: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1151: checking whether we are using GNU C++" >&5 +echo "configure:1191: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1156,7 +1196,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1175,7 +1215,7 @@ ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1179: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1219: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1206,14 +1246,65 @@ else fi fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat > conftest.$ac_ext < +$ac_declaration +int main() { +exit (42); +; return 0; } +EOF +if { (eval echo configure:1268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + continue +fi +rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + + echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1211: checking for object suffix" >&5 +echo "configure:1302: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1217: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1308: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1231,12 +1322,12 @@ OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1235: checking for Cygwin environment" >&5 +echo "configure:1326: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1264,19 +1355,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1268: checking for mingw32 environment" >&5 +echo "configure:1359: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1295,7 +1386,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=y echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1299: checking for executable suffix" >&5 +echo "configure:1390: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1305,7 +1396,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; @@ -1326,17 +1417,39 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT + ecos_CFLAGS="" + ecos_CXXFLAGS="" + ecos_LDADD="" + ecos_INCLUDES="" + ecos_LIBS="" + + + + + + + + echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1334: checking "for Visual C++"" >&5 +echo "configure:1438: checking "for Visual C++"" >&5 MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" + CXX="cl" + + + + if test "${MSVC}" = "yes" ; then + MSVC_SRCDIR=`cygpath -w ${MSVC_SRCDIR} | tr \\\\\\\\ /` fi - if test "${CXX}" = "cl" ; then - MSVC="yes" + + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${msvc_srcdir}\"" + ecos_LDADD="-link" + ecos_LIBS="advapi32.lib" fi @@ -1347,300 +1460,610 @@ else MSVC_TRUE='#' MSVC_FALSE= fi - echo "$ac_t""${MSVC}" 1>&6 + if test "${MSVC}" = "yes" ; then + echo "$ac_t""unfortunately yes" 1>&6 + else + echo "$ac_t""no" 1>&6 + fi + echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1359: checking "the default compiler flags"" >&5 +echo "configure:1477: checking "the default compiler flags"" >&5 - cygflags_enable_debug="no" + ecosflags_enable_debug="no" # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case "${enableval}" in - yes) cygflags_enable_debug="yes" ;; - *) cygflags_enable_debug="no" ;; + yes) ecosflags_enable_debug="yes" ;; + *) ecosflags_enable_debug="no" ;; esac fi - cygflags_enable_ansi="no" + ecosflags_enable_ansi="no" if test "${MSVC}" = "yes" ; then # Check whether --enable-ansi or --disable-ansi was given. if test "${enable_ansi+set}" = set; then enableval="$enable_ansi" case "${enableval}" in - yes) cygflags_enable_ansi="yes" ;; - *) cygflags_enable_ansi="no" ;; + yes) ecosflags_enable_ansi="yes" ;; + *) ecosflags_enable_ansi="no" ;; esac fi fi if test "${GCC}" = "yes" ; then - cyg_CFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" - cyg_CXXFLAGS="-pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" + ecos_CFLAGS="${ecos_CFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -pipe -Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Woverloaded-virtual" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="-nologo -W3" - cyg_CXXFLAGS="-nologo -W3 -GR -GX" + ecos_CFLAGS="${ecos_CFLAGS} -nologo -W3" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -nologo -W3 -GR -GX" else { echo "configure: error: "default flags for ${CC} are not known"" 1>&2; exit 1; } fi - if test "${cygflags_enable_debug}" = "yes" ; then + if test "${ecosflags_enable_debug}" = "yes" ; then if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -g -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -g -O0" + ecos_CFLAGS="${ecos_CFLAGS} -g -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -g -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MDd -Zi" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MDd -Zi" + ecos_CFLAGS="${ecos_CFLAGS} -MDd -Zi" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MDd -Zi" fi else - if test "${GCC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -O0" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -O0" + if test "${GCC}" = "yes" ; then + ecos_CFLAGS="${ecos_CFLAGS} -O0" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -O0" elif test "${MSVC}" = "yes" ; then - cyg_CFLAGS="${cyg_CFLAGS} -MD -O2" - cyg_CXXFLAGS="${cyg_CXXFLAGS} -MD -O2" + ecos_CFLAGS="${ecos_CFLAGS} -MD -O2" + ecos_CXXFLAGS="${ecos_CXXFLAGS} -MD -O2" fi fi CFLAGS="${ac_save_CFLAGS}" CXXFLAGS="${ac_save_CXXFLAGS}" - - + echo "$ac_t""done" 1>&6 + + if test "${ecosflags_enable_debug}" = "yes" ; then + ecosinfra_asserts="yes" + ecosinfra_preconditions="yes" + ecosinfra_postconditions="yes" + ecosinfra_invariants="yes" + ecosinfra_loopinvariants="yes" + ecosinfra_tracing="yes" + ecosinfra_fntracing="yes" + else + ecosinfra_asserts="no" + ecosinfra_preconditions="no" + ecosinfra_postconditions="no" + ecosinfra_invariants="no" + ecosinfra_loopinvariants="no" + ecosinfra_tracing="no" + ecosinfra_fntracing="no" + fi + + # Check whether --enable-asserts or --disable-asserts was given. +if test "${enable_asserts+set}" = set; then + enableval="$enable_asserts" + case "${enableval}" in + yes) ecosinfra_asserts="yes" ;; + no) ecosinfra_asserts="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-asserts option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_asserts}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_USE_ASSERTS 1 +EOF + + fi + + # Check whether --enable-preconditions or --disable-preconditions was given. +if test "${enable_preconditions+set}" = set; then + enableval="$enable_preconditions" + case "${enableval}" in + yes) ecosinfra_preconditions="yes" ;; + no) ecosinfra_preconditions="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-preconditions option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_preconditions}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_INFRA_DEBUG_PRECONDITIONS 1 +EOF + + fi + + # Check whether --enable-postconditions or --disable-postconditions was given. +if test "${enable_postconditions+set}" = set; then + enableval="$enable_postconditions" + case "${enableval}" in + yes) ecosinfra_postconditions="yes" ;; + no) ecosinfra_postconditions="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-postconditions option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_postconditions}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_INFRA_DEBUG_POSTCONDITIONS 1 +EOF + + fi + + # Check whether --enable-invariants or --disable-invariants was given. +if test "${enable_invariants+set}" = set; then + enableval="$enable_invariants" + case "${enableval}" in + yes) ecosinfra_invariants="yes" ;; + no) ecosinfra_invariants="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-invariants option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_invariants}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_INFRA_DEBUG_INVARIANTS 1 +EOF + + fi + + # Check whether --enable-loopinvariants or --disable-loopinvariants was given. +if test "${enable_loopinvariants+set}" = set; then + enableval="$enable_loopinvariants" + case "${enableval}" in + yes) ecosinfra_loopinvariants="yes" ;; + no) ecosinfra_loopinvariants="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-loopinvariants option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_loopinvariants}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS 1 +EOF + + fi + + # Check whether --enable-tracing or --disable-tracing was given. +if test "${enable_tracing+set}" = set; then + enableval="$enable_tracing" + case "${enableval}" in + yes) ecosinfra_tracing="yes" ;; + no) ecosinfra_tracing="no" ;; + *) { echo "configure: error: bad value ${enableval} for disable-tracing option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_tracing}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_USE_TRACING 1 +EOF + + fi + + # Check whether --enable-fntracing or --disable-fntracing was given. +if test "${enable_fntracing+set}" = set; then + enableval="$enable_fntracing" + case "${enableval}" in + yes) ecosinfra_fntracing="yes" ;; + no) ecosinfra_fntracing=no ;; + *) { echo "configure: error: bad value ${enableval} for disable-fntracing option" 1>&2; exit 1; } ;; + esac +fi + + if test "${ecosinfra_fntracing}" = "yes"; then + cat >> confdefs.h <<\EOF +#define CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS 1 +EOF + + fi + + + echo $ac_n "checking for libcdl""... $ac_c" 1>&6 +echo "configure:1680: checking for libcdl" >&5 + + libcdl_srcdir="" + possibles="${srcdir}/.. ${srcdir}/../.. ${srcdir}/../../.. ${srcdir}/../../../.. ${srcdir}/../../../../.." + + libcdl_srcdir="" + for i in ${possibles}; do + if test -d "$i/"libcdl""; then + libcdl_srcdir=$i + break + fi + done + + if test "${libcdl_srcdir}" = "" ; then + possibles="${srcdir}/../host ${srcdir}/../../host ${srcdir}/../../../host ${srcdir}/../../../../host ${srcdir}/../../../../../host ${srcdir}/../../../../../../host" + + libcdl_srcdir="" + for i in ${possibles}; do + if test -d "$i/"libcdl""; then + libcdl_srcdir=$i + break + fi + done + + fi + if test "${libcdl_srcdir}" != "" ; then + libcdl_srcdir="${libcdl_srcdir}/libcdl" + libcdl_srcdir=`cd ${libcdl_srcdir} && /bin/pwd` + fi + + libcdl_builddir="" + possibles=".. ../.. ../../.. ../../../.. ../../../../.." + + libcdl_builddir="" + for i in ${possibles}; do + if test -d "$i/"libcdl""; then + libcdl_builddir=$i + break + fi + done + + if test "${libcdl_builddir}" = "" ; then + possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" + + libcdl_builddir="" + for i in ${possibles}; do + if test -d "$i/"libcdl""; then + libcdl_builddir=$i + break + fi + done + + fi + if test "${libcdl_builddir}" != "" ; then + libcdl_builddir="${libcdl_builddir}/libcdl" + libcdl_builddir=`cd ${libcdl_builddir} && /bin/pwd` + fi + + ecos_libcdl_incdir="" + ecos_libcdl_libdir="" + ecos_libcdl_libs="" + + # Check whether --with-libcdl-header or --without-libcdl-header was given. +if test "${with_libcdl_header+set}" = set; then + withval="$with_libcdl_header" + : +fi + + # Check whether --with-libcdl-lib or --without-libcdl-lib was given. +if test "${with_libcdl_lib+set}" = set; then + withval="$with_libcdl_lib" + : +fi + + # Check whether --with-libcdl or --without-libcdl was given. +if test "${with_libcdl+set}" = set; then + withval="$with_libcdl" + : +fi + + + if test "${with_libcdl_header+set}" = "set"; then + ecos_libcdl_incdir="${with_libcdl_header}" + elif test "${with_libcdl+set}" = "set"; then + ecos_libcdl_incdir="${with_libcdl}/include" + elif test "${libcdl_srcdir}" != "" ; then + ecos_libcdl_incdir="${libcdl_srcdir}" + fi + if test \! -r "${ecos_libcdl_incdir}/cdl.hxx" ; then + { echo "configure: error: libcdl headers not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_incdir = "${ecos_libcdl_incdir}" + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_incdir=`cygpath -w ${ecos_msvc_libcdl_incdir} | tr \\\\\\\\ /` + fi + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_libcdl_incdir}\"" + else + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_libcdl_incdir}" + fi + + if test "${with_libcdl_lib+set}" = "set"; then + ecos_libcdl_libdir="${with_libcdl_lib}" + elif test "${with_libcdl+set}" = "set"; then + ecos_libcdl_libdir="${with_libcdl}/lib" + elif test "${libcdl_builddir}" != "" ; then + ecos_libcdl_libdir="${libcdl_builddir}" + else + { echo "configure: error: libcdl library not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_libdir=${ecos_libcdl_libdir} + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_libcdl_libdir=`cygpath -w ${ecos_msvc_libcdl_libdir} | tr \\\\\\\\ /` + fi + + ecos_LIBS="${ecos_LIBS} cdl.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_libcdl_libdir}\"" + else + ecos_LIBS="${ecos_LIBS} -lcdl" + ecos_LDADD="${ecos_LDADD} -L${ecos_libcdl_libdir}" + fi + + + + echo "$ac_t""-I${ecos_libcdl_incdir} -L${ecos_libcdl_libdir}" 1>&6 + + + echo $ac_n "checking for eCos host-side infrastructure""... $ac_c" 1>&6 +echo "configure:1816: checking for eCos host-side infrastructure" >&5 + + infra_builddir="" + possibles=".. ../.. ../../.. ../../../.. ../../../../.." + + infra_builddir="" + for i in ${possibles}; do + if test -d "$i/"infra""; then + infra_builddir=$i + break + fi + done + + if test "${infra_builddir}" = "" ; then + possibles="../host ../../host ../../../host ../../../../host ../../../../../host ../../../../../../host" + + infra_builddir="" + for i in ${possibles}; do + if test -d "$i/"infra""; then + infra_builddir=$i + break + fi + done + + fi + if test "${infra_builddir}" != "" ; then + infra_builddir="${infra_builddir}/infra" + infra_builddir=`cd ${infra_builddir} && /bin/pwd` + fi + + ecos_infra_incdir="" + ecos_infra_libdir="" + ecos_infra_libs="" + + # Check whether --with-infra-header or --without-infra-header was given. +if test "${with_infra_header+set}" = set; then + withval="$with_infra_header" + : +fi + + # Check whether --with-infra-lib or --without-infra-lib was given. +if test "${with_infra_lib+set}" = set; then + withval="$with_infra_lib" + : +fi + + # Check whether --with-infra or --without-infra was given. +if test "${with_infra+set}" = set; then + withval="$with_infra" + : +fi + + + if test "${with_infra_header+set}" = "set"; then + ecos_infra_incdir="${with_infra_header}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_incdir="${with_infra}/include" + elif test "${infra_builddir}" != "" ; then + ecos_infra_incdir="${infra_builddir}" + else + { echo "configure: error: infrastructure headers not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_incdir = ${ecos_infra_incdir} + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_incdir=`cygpath -w ${ecos_msvc_infra_incdir} | tr \\\\\\\\ /` + fi + + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_infra_incdir}\"" + else + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_infra_incdir}" + fi + + if test "${with_infra_lib+set}" = "set"; then + ecos_infra_libdir="${with_infra_lib}" + elif test "${with_infra+set}" = "set"; then + ecos_infra_libdir="${with_infra}/lib" + elif test "${infra_builddir}" != "" ; then + ecos_infra_libdir="${infra_builddir}" + else + { echo "configure: error: infrastructure library not found" 1>&2; exit 1; } + fi + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_libdir=${ecos_infra_libdir} + + + + if test "${MSVC}" = "yes" ; then + ecos_msvc_infra_libdir=`cygpath -w ${ecos_msvc_infra_libdir} | tr \\\\\\\\ /` + fi + + ecos_LIBS="${ecos_LIBS} cyginfra.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_msvc_infra_libdir}\"" + else + ecos_LIBS="${ecos_LIBS} -lcyginfra" + ecos_LDADD="${ecos_LDADD} -L${ecos_infra_libdir}" + fi + + + + echo "$ac_t""-I${ecos_infra_incdir} -L${ecos_infra_libdir}" 1>&6 -echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 -echo "configure:1427: checking for Tcl version" >&5 -# Check whether --with-tcl-version or --without-tcl-version was given. + + + + ecos_tcl_version="" + ecos_tcl_incdir="" + ecos_tcl_libdir="" + ecos_tk_libs="" + + + echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 +echo "configure:1933: checking for Tcl version" >&5 + # Check whether --with-tcl-version or --without-tcl-version was given. if test "${with_tcl_version+set}" = set; then withval="$with_tcl_version" - cyg_ac_tcl_version=${with_tcl_version} - + ecos_tcl_version=${with_tcl_version} + else - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_version=80 - else - if test "${ac_cv_cygwin}" = "yes" ; then - cyg_ac_tcl_version=80 - else - cyg_ac_tcl_version="" - fi - fi - + if test "${MSVC}" = "yes" ; then + ecos_tcl_version=80 + elif test "${ac_cv_cygwin}" = "yes" ; then + ecos_tcl_version=80 + else + ecos_tcl_version="" + fi + fi -echo "$ac_t""${cyg_ac_tcl_version}" 1>&6 - - + echo "$ac_t""${ecos_tcl_version}" 1>&6 -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" + echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 +echo "configure:1955: checking for Tcl installation" >&5 + + # Check whether --with-tcl-header or --without-tcl-header was given. +if test "${with_tcl_header+set}" = set; then + withval="$with_tcl_header" : fi -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" + # Check whether --with-tcl-lib or --without-tcl-lib was given. +if test "${with_tcl_lib+set}" = set; then + withval="$with_tcl_lib" : fi -# Check whether --with-tcl or --without-tcl was given. + # Check whether --with-tcl or --without-tcl was given. if test "${with_tcl+set}" = set; then withval="$with_tcl" : fi -echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 -echo "configure:1472: checking for Tcl installation" >&5 - + + if test "${MSVC}" = "yes" ; then -if test "${MSVC}" = "yes" ; then - if test "${with_tcl_header+set}" = set; then - cyg_ac_tcl_incdir=${with_tcl_header} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_incdir="${with_tcl}/include" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } - fi - fi - if test "${with_tcl_lib+set}" = set; then - cyg_ac_tcl_libdir=${with_tcl_lib} - else - if test "${with_tcl+set}" = set; then - cyg_ac_tcl_libdir="${with_tcl}/lib" - else - { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } - fi - fi - cyg_ac_tcl_libs="tcl${cyg_ac_tcl_version}.lib" -else - tcl_incdirs="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl$cyg_ac_tcl_version /usr/include" + if test "${with_tcl_header+set}" = set ; then + ecos_tcl_incdir=${with_tcl_header} + elif test "${with_tcl+set}" = set ; then + ecos_tcl_incdir="${with_tcl}/include" + else + { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-header=" 1>&2; exit 1; } + fi -cyg_ac_tcl_incdir=NO -for i in $tcl_incdirs; -do - for j in tcl.h; - do - if test -r "$i/$j"; then - cyg_ac_tcl_incdir=$i - break 2 - fi - done -done - - tcl_libdirs="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$cyg_ac_tcl_version /usr/lib" - -cyg_ac_tcl_libdir=NO -for i in $tcl_libdirs; -do - for j in tclConfig.sh; - do - if test -r "$i/$j"; then - cyg_ac_tcl_libdir=$i - break 2 - fi - done -done - - if test \! -r ${cyg_ac_tcl_libdir}/tclConfig.sh ; then - { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } - else - . ${cyg_ac_tcl_libdir}/tclConfig.sh - cyg_ac_tcl_libs="-ltcl${cyg_ac_tcl_version} ${TCL_LIBS}" - fi -fi - -if test \! -r ${cyg_ac_tcl_incdir}/tcl.h ; then - { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } -fi - -if test "${MSVC}" = "yes" ; then - + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } + fi + ecos_msvc_tcl_incdir="${ecos_tcl_incdir}" + - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_incdir=`cygpath -w ${cyg_ac_tcl_incdir} | tr \\\\\\\\ /` + ecos_msvc_tcl_incdir=`cygpath -w ${ecos_msvc_tcl_incdir} | tr \\\\\\\\ /` fi - + ecos_INCLUDES="${ecos_INCLUDES} \"-I${ecos_msvc_tcl_incdir}\"" + + if test "${with_tcl_lib+set}" = set; then + ecos_tcl_libdir=${with_tcl_lib} + elif test "${with_tcl+set}" = set; then + ecos_tcl_libdir="${with_tcl}/lib" + else + { echo "configure: error: You must specify a Tcl installation with either --with-tcl= or --with-tcl-lib=" 1>&2; exit 1; } + fi + - if test "${MSVC}" = "yes" ; then - cyg_ac_tcl_libdir=`cygpath -w ${cyg_ac_tcl_libdir} | tr \\\\\\\\ /` + ecos_tcl_libdir=`cygpath -w ${ecos_tcl_libdir} | tr \\\\\\\\ /` fi -fi + ecos_LIBS="${ecos_LIBS} tcl${ecos_tcl_version}.lib" + ecos_LDADD="${ecos_LDADD} \"-libpath=${ecos_tcl_libdir}\"" -echo "$ac_t""${cyg_ac_tcl_libdir}" 1>&6 - + ecos_tk_libs="" - - - - - + else + possibles="${with_tcl_header} ${with_tcl}/include ${prefix}/include /usr/include/tcl${ecos_tcl_version} /usr/include" + + ecos_tcl_incdir="" + for i in ${possibles}; do + if test -r "$i/"tcl.h""; then + ecos_tcl_incdir=$i + break + fi + done -echo $ac_n "checking for host-side infrastructure""... $ac_c" 1>&6 -echo "configure:1565: checking for host-side infrastructure" >&5 -cyg_ac_infra_incdir=../../../../infra -cyg_ac_infra_libdir=../../../../infra -if test "${MSVC}" = "yes" ; then - cyg_ac_infra_libraries=cyginfra.lib -else - cyg_ac_infra_libraries=cyginfra -fi -if test \! -d ${cyg_ac_infra_incdir} ; then - { echo "configure: error: unable to locate the infrastructure build directory" 1>&2; exit 1; } -fi + if test \! -r "${ecos_tcl_incdir}/tcl.h" ; then + { echo "configure: error: unable to locate Tcl header file tcl.h" 1>&2; exit 1; } + else + if test "${ecos_tcl_incdir}" != "/usr/include" ; then + ecos_INCLUDES="${ecos_INCLUDES} -I${ecos_tcl_incdir}" + fi + fi + possibles="${with_tcl_lib} ${with_tcl}/lib ${libdir} ${prefix}/lib /usr/lib/tcl$${ecos_tcl_version} /usr/lib" + + ecos_tcl_libdir="" + for i in ${possibles}; do + if test -r "$i/"tclConfig.sh""; then + ecos_tcl_libdir=$i + break + fi + done - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_infra_incdir=`cygpath -w ${cyg_ac_infra_incdir} | tr \\\\\\\\ /` - fi + if test \! -r "${ecos_tcl_libdir}/tclConfig.sh" ; then + { echo "configure: error: unable to locate Tcl config file tclConfig.sh" 1>&2; exit 1; } + else + . ${ecos_tcl_libdir}/tclConfig.sh + ecos_LIBS="${ecos_LIBS} -ltcl${ecos_tcl_version} ${TCL_LIBS}" + fi - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_infra_libdir=`cygpath -w ${cyg_ac_infra_libdir} | tr \\\\\\\\ /` + if test \! -r "${ecos_tcl_libdir}/tkConfig.sh" ; then + { echo "configure: error: unable to locate Tk config file tkConfig.sh" 1>&2; exit 1; } + else + . ${ecos_tcl_libdir}/tkConfig.sh + ecos_tk_libs="-ltk${ecos_tcl_version} ${TK_LIBS}" + for lib in ${TCL_LIBS} ; do + ecos_tk_libs=`echo ${ecos_tk_libs} | sed -e "s!${lib}!!"` + done + fi fi - - - -echo "$ac_t""-I${cyg_ac_infra_incdir} -L${cyg_ac_infra_libdir} libraries ${cyg_ac_infra_libraries}" 1>&6 - -echo $ac_n "checking for libcdl""... $ac_c" 1>&6 -echo "configure:1598: checking for libcdl" >&5 -cyg_ac_cdl_incdir=${srcdir}/../../../../libcdl -cyg_ac_cdl_libdir=../../../../libcdl -if test "${MSVC}" = "yes" ; then - cyg_ac_cdl_libraries=cdl.lib -else - cyg_ac_cdl_libraries=cdl -fi -if test \! -d ${cyg_ac_cdl_incdir} ; then - { echo "configure: error: unable to locate the libcdl source directory" 1>&2; exit 1; } -fi -if test \! -f ${cyg_ac_cdl_incdir}/cdl.hxx ; then - { echo "configure: error: unable to locate the libcdl header file cdl.hxx" 1>&2; exit 1; } -fi -if test \! -d ${cyg_ac_cdl_libdir} ; then - { echo "configure: error: unable to locate the libcdl build directory" 1>&2; exit 1; } -fi + echo "$ac_t""-I${ecos_tcl_incdir} -L${ecos_tcl_libdir}" 1>&6 - - - if test "${MSVC}" = "yes" ; then - cyg_ac_cdl_incdir=`cygpath -w ${cyg_ac_cdl_incdir} | tr \\\\\\\\ /` - fi - - - - - - if test "${MSVC}" = "yes" ; then - cyg_ac_cdl_libdir=`cygpath -w ${cyg_ac_cdl_libdir} | tr \\\\\\\\ /` - fi - - - - -echo "$ac_t""-I${cyg_ac_cdl_incdir} -L${cyg_ac_cdl_libdir} libraries ${cyg_ac_cdl_libraries}" 1>&6 - -win_srcdir=${srcdir} - - - - - if test "${MSVC}" = "yes" ; then - win_srcdir=`cygpath -w ${win_srcdir} | tr \\\\\\\\ /` - fi - trap '' 1 2 15 @@ -1788,6 +2211,11 @@ s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g @@ -1802,31 +2230,23 @@ s%@SET_MAKE@%$SET_MAKE%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g s%@CC@%$CC%g s%@CXX@%$CXX%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g +s%@ecos_CFLAGS@%$ecos_CFLAGS%g +s%@ecos_CXXFLAGS@%$ecos_CXXFLAGS%g +s%@ecos_LDADD@%$ecos_LDADD%g +s%@ecos_INCLUDES@%$ecos_INCLUDES%g +s%@ecos_LIBS@%$ecos_LIBS%g +s%@MSVC_SRCDIR@%$MSVC_SRCDIR%g s%@MSVC_TRUE@%$MSVC_TRUE%g s%@MSVC_FALSE@%$MSVC_FALSE%g -s%@cyg_CFLAGS@%$cyg_CFLAGS%g -s%@cyg_CXXFLAGS@%$cyg_CXXFLAGS%g -s%@cyg_ac_tcl_version@%$cyg_ac_tcl_version%g -s%@cyg_ac_tcl_incdir@%$cyg_ac_tcl_incdir%g -s%@cyg_ac_tcl_libdir@%$cyg_ac_tcl_libdir%g -s%@cyg_ac_tcl_libs@%$cyg_ac_tcl_libs%g -s%@cyg_ac_tk_libs@%$cyg_ac_tk_libs%g -s%@cyg_ac_infra_incdir@%$cyg_ac_infra_incdir%g -s%@cyg_ac_infra_libdir@%$cyg_ac_infra_libdir%g -s%@cyg_ac_infra_libraries@%$cyg_ac_infra_libraries%g -s%@cyg_ac_cdl_incdir@%$cyg_ac_cdl_incdir%g -s%@cyg_ac_cdl_libdir@%$cyg_ac_cdl_libdir%g -s%@cyg_ac_cdl_libraries@%$cyg_ac_cdl_libraries%g -s%@win_srcdir@%$win_srcdir%g +s%@ecos_libcdl_incdir@%$ecos_libcdl_incdir%g +s%@ecos_libcdl_libdir@%$ecos_libcdl_libdir%g +s%@ecos_infra_incdir@%$ecos_infra_incdir%g +s%@ecos_infra_libdir@%$ecos_infra_libdir%g +s%@ecos_tk_libs@%$ecos_tk_libs%g CEOF EOF diff --git a/host/tools/configtool/standalone/common/configure.in b/host/tools/configtool/standalone/common/configure.in --- a/host/tools/configtool/standalone/common/configure.in +++ b/host/tools/configtool/standalone/common/configure.in @@ -7,26 +7,27 @@ dnl configtool/standalone/common dnl dnl ==================================================================== dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN#### -dnl ------------------------------------------- -dnl Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +dnl ------------------------------------------- +dnl Copyright (C) 2002 Bart Veer +dnl Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc. dnl dnl This file is part of the eCos host tools. dnl -dnl This program is free software; you can redistribute it and/or modify it -dnl under the terms of the GNU General Public License as published by the Free -dnl Software Foundation; either version 2 of the License, or (at your option) +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the Free +dnl Software Foundation; either version 2 of the License, or (at your option) dnl any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but WITHOUT -dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +dnl +dnl This program is distributed in the hope that it will be useful, but WITHOUT +dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for dnl more details. -dnl +dnl dnl You should have received a copy of the GNU General Public License along with -dnl this program; if not, write to the Free Software Foundation, Inc., +dnl this program; if not, write to the Free Software Foundation, Inc., dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl -dnl ------------------------------------------- +dnl ------------------------------------------- dnl ####ECOSHOSTGPLCOPYRIGHTEND#### dnl ==================================================================== dnl#####DESCRIPTIONBEGIN#### @@ -41,80 +42,24 @@ dnl ==================================== AC_INIT(ecosconfig.cxx) -dnl Pick up the support files from the top-level of the host sources -AC_CONFIG_AUX_DIR(../../../..) +dnl Pick up the support files from the top-level acsupport directory +AC_CONFIG_AUX_DIR(../../../../../acsupport) +ECOS_CHECK_BUILD_ne_SRC +AC_CANONICAL_HOST AM_INIT_AUTOMAKE(ecosconfig, 0.1) AM_MAINTAINER_MODE -dnl Other standard options. -AC_CANONICAL_HOST AC_PROG_CC AC_PROG_CXX AC_OBJEXT AC_EXEEXT -CYG_AC_PROG_MSVC -CYG_AC_PROG_STANDARD_COMPILER_FLAGS - -dnl ---------------------------------------------------------------------------- -dnl Where can the Tcl library be found? -dnl There are command-line argument --with-tcl and --with-tcl-version. -dnl Otherwise assume that there is already a working installation -dnl in $(PREFIX) -CYG_AC_PATH_TCL - -dnl Now for the host-side infrastructure and for libcdl -dnl The names and paths can just be hardwired, with a minimal -dnl sanity check. Note that for the infrastructure it is -dnl necessary to use the build tree for the include path, -dnl since header files from various places need to be -dnl gathered together. +ECOS_PROG_MSVC +ECOS_PROG_STANDARD_COMPILER_FLAGS -AC_MSG_CHECKING(for host-side infrastructure) -cyg_ac_infra_incdir=../../../../infra -cyg_ac_infra_libdir=../../../../infra -if test "${MSVC}" = "yes" ; then - cyg_ac_infra_libraries=cyginfra.lib -else - cyg_ac_infra_libraries=cyginfra -fi -if test \! -d ${cyg_ac_infra_incdir} ; then - AC_MSG_ERROR(unable to locate the infrastructure build directory) -fi -CYG_AC_MSVC_PATH(cyg_ac_infra_incdir) -CYG_AC_MSVC_PATH(cyg_ac_infra_libdir) -AC_SUBST(cyg_ac_infra_incdir) -AC_SUBST(cyg_ac_infra_libdir) -AC_SUBST(cyg_ac_infra_libraries) -AC_MSG_RESULT(-I${cyg_ac_infra_incdir} -L${cyg_ac_infra_libdir} libraries ${cyg_ac_infra_libraries}) - -AC_MSG_CHECKING(for libcdl) -cyg_ac_cdl_incdir=${srcdir}/../../../../libcdl -cyg_ac_cdl_libdir=../../../../libcdl -if test "${MSVC}" = "yes" ; then - cyg_ac_cdl_libraries=cdl.lib -else - cyg_ac_cdl_libraries=cdl -fi -if test \! -d ${cyg_ac_cdl_incdir} ; then - AC_MSG_ERROR(unable to locate the libcdl source directory) -fi -if test \! -f ${cyg_ac_cdl_incdir}/cdl.hxx ; then - AC_MSG_ERROR(unable to locate the libcdl header file cdl.hxx) -fi -if test \! -d ${cyg_ac_cdl_libdir} ; then - AC_MSG_ERROR(unable to locate the libcdl build directory) -fi -CYG_AC_MSVC_PATH(cyg_ac_cdl_incdir) -CYG_AC_MSVC_PATH(cyg_ac_cdl_libdir) -AC_SUBST(cyg_ac_cdl_incdir) -AC_SUBST(cyg_ac_cdl_libdir) -AC_SUBST(cyg_ac_cdl_libraries) -AC_MSG_RESULT(-I${cyg_ac_cdl_incdir} -L${cyg_ac_cdl_libdir} libraries ${cyg_ac_cdl_libraries}) - -dnl Provide a VC++-friendly version of srcdir -win_srcdir=${srcdir} -CYG_AC_MSVC_PATH(win_srcdir) -AC_SUBST(win_srcdir) +ECOS_ARG_INFRASTRUCTURE +ECOS_PATH_LIBCDL +ECOS_PATH_INFRA +ECOS_PATH_TCL AC_OUTPUT(Makefile) diff --git a/packages/io/usb/slave/current/host/Makefile.am b/packages/io/usb/slave/current/host/Makefile.am --- a/packages/io/usb/slave/current/host/Makefile.am +++ b/packages/io/usb/slave/current/host/Makefile.am @@ -60,7 +60,7 @@ AUTOMAKE_OPTIONS = 1.3 foreign if SUPPORTED -AM_CFLAGS = @ecos_CFLAGS@ -DUSBHOST_VERSION=\"@VERSION@\" -DPKGVERSION=\"@PACKAGE_VERSION@\" -DUSBAUXDIR=\"$(libexecdir)/ecos/@PACKAGE_NAME@_@PACKAGE_VERSION@\" +AM_CFLAGS = @ecos_CFLAGS@ -DUSBHOST_VERSION=\"@VERSION@\" -DPKGVERSION=\"@PACKAGE_VERSION@\" -DUSBAUXDIR=\"$(libexecdir)/ecos/@PACKAGE_INSTALL@\" AM_CXXFLAGS = @ecos_CXXFLAGS@ INCLUDES = @ecos_INCLUDES@ LIBS = @ecos_LIBS@ @ecos_LDADD@ @@ -81,7 +81,7 @@ usbhost_SOURCES = usbhost.c usbhost_DEPENDENCIES = ../tests/protocol.h ../tests/common.c usbhost_LDADD = -lpthread -usbauxdir = $(libexecdir)/ecos/@PACKAGE_NAME@_@PACKAGE_VERSION@ +usbauxdir = $(libexecdir)/ecos/@PACKAGE_INSTALL@ usbaux_PROGRAMS = usbchmod usbaux_DATA = usbhost.tcl list.tcl verbose.tcl usbchmod_SOURCES = usbchmod.c @@ -100,4 +100,15 @@ install-data-hook: chown root $(usbauxdir)/usbchmod chmod u+s $(usbauxdir)/usbchmod +else + +## When automake scans for hooks it does not take conditionals fully +## into account. If the conditional is not satisfied the generated +## makefile will still try to invoke the hook, so dummy hooks are needed. +install-exec-hook: + echo Nothing to be done for this platform + +install-data-hook: + echo Nothing to be done for this platform + endif diff --git a/packages/io/usb/slave/current/host/Makefile.in b/packages/io/usb/slave/current/host/Makefile.in --- a/packages/io/usb/slave/current/host/Makefile.in +++ b/packages/io/usb/slave/current/host/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,36 +11,6 @@ # PARTICULAR PURPOSE. #####ECOSGPLCOPYRIGHTBEGIN#### -## ------------------------------------------- -## This file is part of eCos, the Embedded Configurable Operating System. -## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. -## -## eCos is free software; you can redistribute it and/or modify it under -## the terms of the GNU General Public License as published by the Free -## Software Foundation; either version 2 or (at your option) any later version. -## -## eCos is distributed in the hope that it will be useful, but WITHOUT ANY -## WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -## for more details. -## -## You should have received a copy of the GNU General Public License along -## with eCos; if not, write to the Free Software Foundation, Inc., -## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -## -## As a special exception, if other files instantiate templates or use macros -## or inline functions from this file, or you compile this file and link it -## with other works to produce a work based on this file, this file does not -## by itself cause the resulting work to be covered by the GNU General Public -## License. However the source code for this file must still be made available -## in accordance with section (3) of the GNU General Public License. -## -## This exception does not invalidate any other reasons why a work based on -## this file might be covered by the GNU General Public License. -## -## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. -## at http://sources.redhat.com/ecos/ecos-license/ -## ------------------------------------------- #####ECOSGPLCOPYRIGHTEND#### #######DESCRIPTIONBEGIN#### ######DESCRIPTIONEND#### @@ -96,6 +66,7 @@ host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ CXX = @CXX@ +ECOS_REPOSITORY = @ECOS_REPOSITORY@ EXEEXT = @EXEEXT@ LN_S = @LN_S@ MAINT = @MAINT@ @@ -103,7 +74,8 @@ MAKEINFO = @MAKEINFO@ MSVC_SRCDIR = @MSVC_SRCDIR@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ -PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_DIR = @PACKAGE_DIR@ +PACKAGE_INSTALL = @PACKAGE_INSTALL@ PACKAGE_VERSION = @PACKAGE_VERSION@ VERSION = @VERSION@ ecos_CFLAGS = @ecos_CFLAGS@ @@ -119,20 +91,20 @@ ecos_tk_libs = @ecos_tk_libs@ AUTOMAKE_OPTIONS = 1.3 foreign -@SUPPORTED_TRUE@AM_CFLAGS = @ecos_CFLAGS@ -DUSBHOST_VERSION=\"@VERSION@\" -DPKGVERSION=\"@PACKAGE_VERSION@\" -DUSBAUXDIR=\"$(libexecdir)/ecos/@PACKAGE_NAME@_@PACKAGE_VERSION@\" -@SUPPORTED_TRUE@AM_CXXFLAGS = @ecos_CXXFLAGS@ -@SUPPORTED_TRUE@INCLUDES = @ecos_INCLUDES@ -@SUPPORTED_TRUE@LIBS = @ecos_LIBS@ @ecos_LDADD@ +@SUPPORTED_TRUE@AM_CFLAGS = @SUPPORTED_TRUE@@ecos_CFLAGS@ -DUSBHOST_VERSION=\"@VERSION@\" -DPKGVERSION=\"@PACKAGE_VERSION@\" -DUSBAUXDIR=\"$(libexecdir)/ecos/@PACKAGE_INSTALL@\" +@SUPPORTED_TRUE@AM_CXXFLAGS = @SUPPORTED_TRUE@@ecos_CXXFLAGS@ +@SUPPORTED_TRUE@INCLUDES = @SUPPORTED_TRUE@@ecos_INCLUDES@ +@SUPPORTED_TRUE@LIBS = @SUPPORTED_TRUE@@ecos_LIBS@ @ecos_LDADD@ -@SUPPORTED_TRUE@noinst_PROGRAMS = usbhost -@SUPPORTED_TRUE@usbhost_SOURCES = usbhost.c -@SUPPORTED_TRUE@usbhost_DEPENDENCIES = ../tests/protocol.h ../tests/common.c -@SUPPORTED_TRUE@usbhost_LDADD = -lpthread +@SUPPORTED_TRUE@noinst_PROGRAMS = @SUPPORTED_TRUE@usbhost +@SUPPORTED_TRUE@usbhost_SOURCES = @SUPPORTED_TRUE@usbhost.c +@SUPPORTED_TRUE@usbhost_DEPENDENCIES = @SUPPORTED_TRUE@../tests/protocol.h ../tests/common.c +@SUPPORTED_TRUE@usbhost_LDADD = @SUPPORTED_TRUE@-lpthread -@SUPPORTED_TRUE@usbauxdir = $(libexecdir)/ecos/@PACKAGE_NAME@_@PACKAGE_VERSION@ -@SUPPORTED_TRUE@usbaux_PROGRAMS = usbchmod -@SUPPORTED_TRUE@usbaux_DATA = usbhost.tcl list.tcl verbose.tcl -@SUPPORTED_TRUE@usbchmod_SOURCES = usbchmod.c +@SUPPORTED_TRUE@usbauxdir = @SUPPORTED_TRUE@$(libexecdir)/ecos/@PACKAGE_INSTALL@ +@SUPPORTED_TRUE@usbaux_PROGRAMS = @SUPPORTED_TRUE@usbchmod +@SUPPORTED_TRUE@usbaux_DATA = @SUPPORTED_TRUE@usbhost.tcl list.tcl verbose.tcl +@SUPPORTED_TRUE@usbchmod_SOURCES = @SUPPORTED_TRUE@usbchmod.c ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../acsupport/mkinstalldirs CONFIG_CLEAN_FILES = @@ -478,6 +450,12 @@ mostlyclean distclean maintainer-clean @SUPPORTED_TRUE@ chown root $(usbauxdir)/usbchmod @SUPPORTED_TRUE@ chmod u+s $(usbauxdir)/usbchmod +@SUPPORTED_FALSE@install-exec-hook: +@SUPPORTED_FALSE@ echo Nothing to be done for this platform + +@SUPPORTED_FALSE@install-data-hook: +@SUPPORTED_FALSE@ echo Nothing to be done for this platform + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/packages/io/usb/slave/current/host/aclocal.m4 b/packages/io/usb/slave/current/host/aclocal.m4 --- a/packages/io/usb/slave/current/host/aclocal.m4 +++ b/packages/io/usb/slave/current/host/aclocal.m4 @@ -1,6 +1,6 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p5 -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -67,7 +67,7 @@ sinclude(../../../../../../acsupport/aci # Define a conditional. -AC_DEFUN(AM_CONDITIONAL, +AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then @@ -87,7 +87,7 @@ fi]) dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -AC_DEFUN(AM_INIT_AUTOMAKE, +AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) @@ -115,7 +115,7 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # Check to make sure that the build environment is sane. # -AC_DEFUN(AM_SANITY_CHECK, +AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 @@ -156,7 +156,7 @@ AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, +AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. @@ -175,7 +175,7 @@ AC_SUBST($1)]) # serial 1 -AC_DEFUN(AM_MAINTAINER_MODE, +AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, diff --git a/packages/io/usb/slave/current/host/configure b/packages/io/usb/slave/current/host/configure --- a/packages/io/usb/slave/current/host/configure +++ b/packages/io/usb/slave/current/host/configure @@ -15,9 +15,9 @@ ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help - --enable-debug do a debug rather than a release build" + --enable-debug do a debug rather than a release build" ac_help="$ac_help - --enable-ansi Do an ANSI rather than a unicode build" + --enable-ansi do an ANSI rather than a unicode build" ac_help="$ac_help --with-tcl-version= version of Tcl to be used" ac_help="$ac_help @@ -1228,8 +1228,59 @@ else fi fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat > conftest.$ac_ext < +$ac_declaration +int main() { +exit (42); +; return 0; } +EOF +if { (eval echo configure:1250: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + continue +fi +rm -f conftest* + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + + echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1233: checking whether ln -s works" >&5 +echo "configure:1284: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1250,13 +1301,13 @@ else fi echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1254: checking for object suffix" >&5 +echo "configure:1305: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1311: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1274,12 +1325,12 @@ OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1278: checking for Cygwin environment" >&5 +echo "configure:1329: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1345: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -1307,19 +1358,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1311: checking for mingw32 environment" >&5 +echo "configure:1362: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1374: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -1338,7 +1389,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=y echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1342: checking for executable suffix" >&5 +echo "configure:1393: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1348,7 +1399,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; @@ -1386,7 +1437,7 @@ ac_exeext=$EXEEXT echo $ac_n "checking "for Visual C++"""... $ac_c" 1>&6 -echo "configure:1390: checking "for Visual C++"" >&5 +echo "configure:1441: checking "for Visual C++"" >&5 MSVC="no"; if test "${CC}" = "cl" ; then MSVC="yes" @@ -1425,7 +1476,7 @@ fi echo $ac_n "checking "the default compiler flags"""... $ac_c" 1>&6 -echo "configure:1429: checking "the default compiler flags"" >&5 +echo "configure:1480: checking "the default compiler flags"" >&5 ecosflags_enable_debug="no" # Check whether --enable-debug or --disable-debug was given. @@ -1497,7 +1548,7 @@ fi echo $ac_n "checking for Tcl version""... $ac_c" 1>&6 -echo "configure:1501: checking for Tcl version" >&5 +echo "configure:1552: checking for Tcl version" >&5 # Check whether --with-tcl-version or --without-tcl-version was given. if test "${with_tcl_version+set}" = set; then withval="$with_tcl_version" @@ -1519,7 +1570,7 @@ fi echo "$ac_t""${ecos_tcl_version}" 1>&6 echo $ac_n "checking for Tcl installation""... $ac_c" 1>&6 -echo "configure:1523: checking for Tcl installation" >&5 +echo "configure:1574: checking for Tcl installation" >&5 # Check whether --with-tcl-header or --without-tcl-header was given. if test "${with_tcl_header+set}" = set; then @@ -1643,9 +1694,8 @@ fi package_dir=`cd ${srcdir} && /bin/pwd` PACKAGE_VERSION=`dirname ${package_dir}` PACKAGE_VERSION=`basename ${PACKAGE_VERSION}` - - package_dir=`dirname ${package_dir}` + package_dir=`dirname ${package_dir}` package_dir=`dirname ${package_dir}` possibles="${package_dir}/.. ${package_dir}/../.. ${package_dir}/../../.. ${package_dir}/../../../.. ${package_dir}/../../../../../.." @@ -1661,11 +1711,15 @@ fi if test "${repository_root}" = "" ; then { echo "configure: error: Failed to identify this package's position within the eCos repository" 1>&2; exit 1; } fi - repository_root=`cd "${repository_root}/packages" && /bin/pwd` - package_dir=`echo ${package_dir} | sed -e "s:${repository_root}/::"` + ECOS_REPOSITORY=`cd "${repository_root}/packages/pkgconf/.." && /bin/pwd` + + PACKAGE_DIR=`echo ${package_dir} | sed -e "s:${ECOS_REPOSITORY}/::"` - PACKAGE_NAME=`echo ${package_dir} | sed -e "s:/:_:g"` - + PACKAGE_INSTALL="${PACKAGE_DIR}/${PACKAGE_VERSION}" + + + + fi @@ -1851,8 +1905,10 @@ s%@MSVC_SRCDIR@%$MSVC_SRCDIR%g s%@MSVC_TRUE@%$MSVC_TRUE%g s%@MSVC_FALSE@%$MSVC_FALSE%g s%@ecos_tk_libs@%$ecos_tk_libs%g +s%@ECOS_REPOSITORY@%$ECOS_REPOSITORY%g +s%@PACKAGE_DIR@%$PACKAGE_DIR%g s%@PACKAGE_VERSION@%$PACKAGE_VERSION%g -s%@PACKAGE_NAME@%$PACKAGE_NAME%g +s%@PACKAGE_INSTALL@%$PACKAGE_INSTALL%g CEOF EOF diff --git a/packages/io/usb/slave/current/host/configure.in b/packages/io/usb/slave/current/host/configure.in --- a/packages/io/usb/slave/current/host/configure.in +++ b/packages/io/usb/slave/current/host/configure.in @@ -91,7 +91,7 @@ if test "${SUPPORTED}" = "yes" ; then AC_MSG_ERROR([The USB testing support requires at least version 8.2 of Tcl/Tk]) fi fi - ECOS_PACKAGE_NAME_AND_VERSION + ECOS_PACKAGE_DIRS fi dnl There is no real need for a config.h file at this time, since the code