2003-08-28  Gary Thomas  <gary@mlbassoc.com>

	* src/redboot_linux_exec.c: Obsolete file - removed.

	* src/plf_redboot_linux_exec.c: New file - platform specifics
	for booting Linux kernel from RedBoot.

	* cdl/hal_powerpc_mbx.cdl: Linux booting from RedBoot is 
	now supported at the architecture level.  Changes to support 
	architecture/platform layering.

2003-07-18  Nick Garnett  <nickg@balti.calivar.com>

	* cdl/hal_powerpc_mbx.cdl:
        Changed values for CYGNUM_HAL_RTC_NUMERATOR,
        CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
        "default_value" from "calculated". This makes it easier
        to change these values globally.
        
2003-03-23  Gary Thomas  <gary@mlbassoc.com>

	* cdl/hal_powerpc_mbx.cdl: New option for setting processor type.

2003-03-11  Mark Salter  <msalter@redhat.com>

	* src/redboot_linux_exec.c (do_exec): Call eth_drv_stop as necessary.

2003-03-07  Gary Thomas  <gary@mlbassoc.com>

	* include/plf_stub.h: Remove [confusing] platform specific include.

2002-12-02  Gary Thomas  <gthomas@ecoscentric.com>

	* include/plf_intr.h: Use MPC8xx variant RESET support.

2002-11-26  Gary Thomas  <gthomas@ecoscentric.com>

	* cdl/hal_powerpc_mbx.cdl: Move platform defines to platform package.

2002-11-25  Gary Thomas  <gthomas@ecoscentric.com>

	* cdl/hal_powerpc_mbx.cdl: Add new CDL which describes port layout.

2002-08-02  Andrew Lunn <Andrew.Lunn@ascom.ch>

	* cdl/hal_powerpc_mbx.cdl: Redboot exec command can now be disabled 
	  by CDL
	
2002-06-27  Gary Thomas  <gary@chez-thomas.org>

	* include/plf_regs.h: New file - platform overrides.

2002-05-13  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Removed implemntation of
	CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT_NOT_GUARANTEED.

2002-04-11  Gary Thomas  <gthomas@redhat.com>

	* include/plf_cache.h: Cache control is in hal/common CDL.

2002-01-23  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c (do_exec): Better match for EPPCbug
	environment, necessary for Linux boot.

	* src/hal_aux.c: Move IMMR to match what Motorola EPPCbug uses.

2002-01-16  Nick Garnett  <nickg@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Added CYGSEM_REDBOOT_HAL_LINUX_BOOT to
	enable Linux booting support.

	* src/redboot_linux_exec.c: Added this file to contain Linux exec
	command.

2001-06-21  Jonathan Larmour  <jlarmour@redhat.com>

	* images/*: Remove. Don't bloat repository with things already on
	the web.

2001-05-07  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: 
	Disable CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT_NOT_GUARANTEED since most
	installations will now use RedBoot.

2001-05-05  Gary Thomas  <gthomas@redhat.com>

	* misc/redboot_ROM_40.ecm: 
	* misc/redboot_RAM_40.ecm: New configuration - 40MHz boards.

	* misc/redboot_ROM.ecm: 
	* misc/redboot_RAM.ecm: Update for latest RedBoot, include compression.

	* src/hal_diag.c: 
	* include/plf_stub.h: 
	* include/plf_intr.h: 
	* cdl/hal_powerpc_mbx.cdl: Fix copyrights.

2001-03-08  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Does not guarantee virtual vector
	support.

2001-02-23  Gary Thomas  <gthomas@redhat.com>

	* misc/redboot_RAM.ecm: Renamed from redboot_RAM.cfg

	* misc/redboot_ROM.ecm: Renamed from redboot_ROM.cfg

2001-02-23  Jesper Skov  <jskov@redhat.com>

	* include/plf_cache.h (HAL_FLASH_CACHES_WANT_OPTIMAL): Added.
	Removed again.

2001-02-08  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Respect channel configuration
	constraints.

	* src/hal_diag.c: Replace CYGSEM_HAL_DIAG_MANGLER_None with
	CYGDBG_HAL_DIAG_TO_DEBUG_CHAN.

2001-01-31  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Replaced CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL
	with CYGSEM_HAL_DIAG_MANGLER_GDB/None

2001-01-26  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h: Moved reset macro to
	* include/plf_intr.h: this file.

2001-01-19  Gary Thomas  <gthomas@redhat.com>

	* include/hal_diag.h: Remove unwarranted disclaimer [commentary].

2001-01-03  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Let RTC [heartbeat] rate be user
	specified.

2000-10-20  Gary Thomas  <gthomas@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_ram.mlt: 
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi: 
	* include/pkgconf/mlt_powerpc_mbx_ram.h: 
	Increase reserved memory - required by RedBoot.

	* misc/redboot_ROM.cfg: 
	* misc/redboot_RAM.cfg: 
	* images/redboot_ROM.srec: 
	* images/redboot_ROM.img: 
	* images/redboot_ROM.bin: 
	* images/redboot_RAM.bin: 
	* images/redboot_RAM.img: 
	* images/redboot_RAM.srec: New file(s).

	* cdl/hal_powerpc_mbx.cdl: Add RedBoot configuration rules.

2000-10-20  Jonathan Larmour  <jlarmour@redhat.com>

	* tests/mbxtime.cxx: Ensure default priority constructors
	are called.

2000-10-20  Jonathan Larmour  <jlarmour@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_ram.h:
	* include/pkgconf/mlt_powerpc_mbx_rom.h:
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi:
	* include/pkgconf/mlt_powerpc_mbx_rom.ldi:
	Regenerated with updated host tools

2000-10-19  Jesper Skov  <jskov@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_ram.h: Added heap1 label.
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt: Same.
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi: Same.
	* include/pkgconf/mlt_powerpc_mbx_rom.h: Same.
	* include/pkgconf/mlt_powerpc_mbx_rom.mlt: Same.
	* include/pkgconf/mlt_powerpc_mbx_rom.ldi: Same.

2000-09-17  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Add platform/cpu identification strings.

2000-08-28  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Fix startup type description - was
	totally bogus stuff copied from a different HAL.

2000-08-15  Gary Thomas  <gthomas@redhat.com>

	* src/mbx.S: Use actual ROM layout instead of magic numbers.

2000-06-28  Jesper Skov  <jskov@redhat.com>

	* include/hal_diag.h: 
	* src/hal_diag.c: 
	Cleanup.

2000-06-22  John Dallaway  <jld@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_rom.mlt:

	Synchronize with mlt_powerpc_mbx_rom.ldi.

2000-06-21  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Provide comms_init function, initializing the
	serial device. Changed quicc calls to provide eppc_base.

	* include/plf_stub.h: 
	* include/hal_diag.h:
	Changed defines to match new procs table handling of IO.

2000-06-15  Jesper Skov  <jskov@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_rom.h: 
	* include/pkgconf/mlt_powerpc_mbx_ram.h: 
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi: 
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt: 
	Updated.

	* src/hal_aux.c: Fix warning.

	* include/hal_diag.h: Fix typo. Moved diag-inclusion decision
	expression to common HAL.
	Only define HAL_PLF_DIAG routines when necessary.

	* cdl/hal_powerpc_mbx.cdl: Last CDL tweaks.

2000-06-14  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h: Move reset stuff out of INCLUDE_STUBS
	config. It really should live in the platform equivalent of
	hal_arch.h...

	* include/hal_diag.h: 
	* src/hal_diag.c: 
	Changes to use the common virtual vector code for diagnostics.

2000-06-13  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h (HAL_STUB_PLATFORM_RESET_ENTRY): Use an
	absolute address.

	* src/hal_aux.c (hal_platform_init): Added.

	* include/plf_stub.h: Cleaned up reset definitions.

	* include/pkgconf/mlt_powerpc_mbx_rom.ldi: 
	* include/pkgconf/mlt_powerpc_mbx_rom.mlt: 
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi: 
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt:
	Reserve space for virtual table.
	
	* cdl/hal_powerpc_mbx.cdl: Added support for virtual
	vectors. Change stub requirements accordingly.

2000-03-13  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h (HAL_STUB_PLATFORM_RESET): Jump to stub
	entry-point on GDB kill.

2000-03-04  Gary Thomas  <gthomas@redhat.com>

	* src/hal_aux.c (_mbx_init_i2c): I2C now working from eCos/GDB.

2000-03-03  Gary Thomas  <gthomas@redhat.com>

	* src/hal_aux.c (_mbx_fetch_VPD): New function - reads EEPROM and
	builds a queryable database.

2000-03-02  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Fix typo.

2000-02-29  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/hal_diag.c: Support option to suppress GDB protocol on
	the diag/serial device.

2000-02-28  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Remove hardcoded copy_vectors
	definition.

2000-02-21  Jesper Skov  <jskov@redhat.com>

	* src/mbx.S: use arch.inc instead of ppc.inc

2000-02-18  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* cdl/hal_powerpc_mbx.cdl (CYGBLD_BUILD_GDB_STUBS): When building
	stubs, define every dependency required here rather than in the
	template

2000-02-17  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* include/pkgconf/hal_powerpc_mbx.h: Fix MPC860 -> MPC8xx typo
	* cdl/hal_powerpc_mbx.cdl: likewise
	
2000-02-11  Jesper Skov  <jskov@redhat.com>

	* src/hal_aux.c: Cleaned up includes.

2000-02-10  Jesper Skov  <jskov@redhat.com>

	* include/plf_stub.h: 
	Removed HAL_STUB_PLATFORM_STUBS_INIT.

	* misc/STUBS_config: [added]
	Removed stubs as a legal startup type.

2000-02-07  Jesper Skov  <jskov@redhat.com>

	* include/pkgconf/mlt_powerpc_mbx_ram.mlt: 
	* include/pkgconf/mlt_powerpc_mbx_rom.mlt: 
	Fixed some typos.

	* src/mbx.S: Use CYGHWR_HAL_POWERPC_BOARD_SPEED.

	* include/pkgconf/mlt*.*: Use new exception scheme.	
	* include/pkgconf/hal_powerpc_mbx.h: Use
	CYGHWR_HAL_POWERPC_BOARD_SPEED. Use MPC8xx variant code.


	* cdl/hal_powerpc_mbx.cdl: Use MPC8xx variant code. Fix some CDL
	bugs. Use CYGHWR_HAL_POWERPC_BOARD_SPEED
	Specify CPU options in linker flags.

2000-02-03  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: CYG_HAL_POWERPC_x->CYGPKG_...

2000-02-03  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Generate S-record version of stub.
	Implements stubs.
	
2000-01-27  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Moved part of stubs build rule to
	common HAL.  Changed description.

2000-01-26  Jesper Skov  <jskov@redhat.com>

	* include/plf_cache.h: Added.

2000-01-26  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_powerpc_mbx.cdl: Fix display string.

2000-01-24  Jesper Skov  <jskov@cygnus.co.uk>
	* cdl/hal_powerpc_mbx.cdl: Add stubs build rule.
	* src/mbx.S: Depend on CYGSEM_HAL_ROM_MONITOR instead of
	CYG_HAL_ROM_MONITOR.

2000-01-24  John Dallaway  <jld@cygnus.co.uk>

	* cdl/*.cdl:

	Remove obsolete option CYGTST_TESTING_IDENTIFIER.

2000-01-19  Hugo Tyson  <hmt@cygnus.co.uk>

	* cdl/*.cdl: Add descriptions to a number of options &c which were
	lacking same, also tidied up other typos as noticed en passant.

1999-12-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* cdl/hal_powerpc_mbx.cdl: Ensure we "puts" to appropriate CDL header

1999-12-20  Gary Thomas  <gthomas@cygnus.co.uk>

	* cdl/hal_powerpc_mbx.cdl: Add -Wl for linker options.

1999-11-25  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/pkgconf/mlt_powerpc_mbx_rom.h: 
	* include/pkgconf/mlt_powerpc_mbx_ram.h: New file(s).

1999-11-03  John Dallaway  <jld@cygnus.co.uk>

	* cdl/hal_powerpc_mbx.cdl: Define build options.

1999-10-22  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_diag.c (hal_diag_write_char): Call new hal_stub.h macro
	CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION() instead of simply disabling
	interrupts, ditto for enable.  This provides atomicity wrt single
	stepping and watching variables when this code to output a whole
	GDB $O packet is entered.

1999-09-20  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/pkgconf/hal_powerpc_mbx.h:
	(CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH) new config option to
	control chip select initialization.
	
	* src/mbx.S: Take notice of CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH.

	* misc/stubrom.perm: Reference the new option for folks who want
	to boot from the 32-bit flash.

1999-09-13  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/pkgconf/hal_powerpc_mbx.h (CYGHWR_HAL_POWERPC_BOARD_SPEED): 
	Missing default value (wouldn't build sans ConfigTool).

1999-09-09  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/pkgconf/hal_powerpc_mbx.h (CYGHWR_HAL_POWERPC_MBX_BOARD_SPEED): 
	Rename CDL option to avoid a name clash.

1999-07-27  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S: Fix typo in PLL setup value.  Reported from the net.

1999-06-28  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_diag.c (hal_diag_init): Fix a "default type" warning.

1999-06-28  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_diag.c (hal_diag_write_char): Only gobble the GDB ACK
	characters if there is no pre-ISR polling call to look for ^C
	chars to interrupt the prog.  (CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
	- should not be enabled if devices are in use)

1999-06-28  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S (__upmtbl_start): We do not trust rewriting the UPMs
	for DRAM timing whilst running out of that very DRAM.  So only
	init UPMs in ROM start (including when making a stub rom).

1999-06-27  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/hal_diag.c: Support buffering of diagnostic data for later
	display.  Controlled by CYGDBG_DIAG_BUF.  Also, turn on code to
	handle GDB ACK characters when stubs are enabled.

1999-06-25  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S (__upmtbl_start): depending on CYG_HAL_ROM_MONITOR, we
	use the OLD TABLES if making a stub rom.  For greatest commonality
	of startup code between RAM startup development binaries and ROM
	startup "product" binaries we completely re-initialize the UPMs
	that control DRAM timing even in RAM start when executing out of
	that very DRAM.
	
	It appears that it is OK to rewrite the UPMs with the new timing
	data when already running with the old timing data, but not OK to
	update from new to new.  So we use the old timing data when
	building stubs.

	An alternative would be to conditionally not perform the UPM
	initialization in RAM startup, but that would weaken the testing
	value of RAM startup programs.

1999-06-24  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S (__upmtbl_start): Use the new tables recently supplied
	by email from Motorola; without them, the cache-line-zero
	operation only zeros 12 bytes rather than 16.  [PR 20226]

1999-06-24  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/plf_stub.h (HAL_STUB_PLATFORM_INIT_BREAK_IRQ): Define
	this (empty) for it is required if HAL_DEBUG_GDB_BREAK_SUPPORT is
	enabled.  Improve HAL_STUB_PLATFORM_SET_BAUD_RATE.

1999-06-18  John Dallaway  <jld@cygnus.co.uk>

	* include/pkgconf/mlt_powerpc_mbx_rom.mlt: 
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt:
	Fix MLT save files to match the default linker script
	fragments.

1999-06-18  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/pkgconf/mlt_powerpc_mbx_rom.mlt: 
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt:
	Initial attempt at getting these to match the reality of the
	linker script fragment; we'll have to see whether they're right.

1999-06-18  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S: Data cache setup in hal_hardware_init: set
	force-writethrough mode and explicitly disable little-endian swap
	mode, whatever _that_ is.  Force-writethrough is required if you
	are to enable the data cache, it crashes otherwise.  Cause
	unknown, could be the memory system doesn't support whatever
	access regime is used, or caching problems with loading code
	through the stubs?  In any case, this is a fine workaround.
	
	* src/hal_aux.c (CYGARC_MEMDESC_TABLE): Enable caching of the ROM;
	seems to do no harm, and helps ROM-based performance.

1999-06-18  Jesper Skov  <jskov@cygnus.co.uk>

	* include/pkgconf/hal_powerpc_mbx.h: Fixed CDL description.

1999-06-17  Hugo Tyson  <hmt@cygnus.co.uk>

	* misc/stubrom.perm: New file: a perm for creating an eCos stub
	ROM for the MBX.  Pro tem, ^C to break is not supported, so the
	feature must remain disabled.

	* include/plf_stub.h (HAL_STUB_PLATFORM_INIT): Diddle the LEDs if
	ROM start to distinguish eCos stub ROM from CygMon ROM from eCos
	app running/internal stubs.

1999-06-17  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/pkgconf/mlt_powerpc_mbx_rom.ldi: Move RAM usage in ROM
	startup to 2000 so that we can build stubs that don't fight with
	RAM started apps' RAM use from 10000.

1999-06-17  Hugo Tyson  <hmt@cygnus.co.uk>

	* tests/PKGconf.mak: New file, to build that below.

	* tests/mbxtime.cxx: New file, a simple test of the system timer
	for a human to check it's roughly seconds.

	* include/pkgconf/mlt_powerpc_mbx_rom.ldi: ROM startup supported.

	* include/pkgconf/hal_powerpc_mbx.h
	(CYGHWR_HAL_POWERPC_MBX_BOARD_SPEED): Add this config option to
	select 40MHz or 50MHz system clock speed.

	* src/mbx.S (hal_hardware_init): Complete system init for ROM
	start; move return address to inside the ROM from wherever we
	booted.  Proper board clock speed selection.

	* src/hal_diag.c (hal_diag_write_char_serial): Do not encode
	packets for GDB if using ROM start.

	* src/hal_aux.c (CYGARC_MEMDESC_TABLE): Map the ROM correctly so
	that ROM start works.

1999-06-15  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S (hal_hardware_init): Add full ROM-type startup code
	and some useful LED-diddling routines and macro, to assist in
	debugging ROM startup.
	
	* src/hal_aux.c (CYGARC_MEMDESC_TABLE): Enable memory mapping to
	the LED control register so that we can treak them with mem mgt
	enabled ie. in a normal execution context.	

1999-06-11  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mbx.S (hal_hardware_init): Set up the base address of the
	control registers in IMMR to 0xff000000 (as defined in arch).
	Turn off external interrupts, initialize the decrementer.

	* src/PKGconf.mak: Build the new file.

	* src/hal_aux.c (CYGARC_MEMDESC_TABLE): New file, to define this
	object for per-platform table-driven memory map initialization.
	The table used to be in hal_misc.c in the architectural HAL; this
	is platform dependent so better and cleaner here.

1999-06-10  Hugo Tyson  <hmt@cygnus.co.uk>

	* ChangeLog: Component created, based partly on the FADS work and
	on CygMon's serial IO code for the MBX860, to support the Motorola
	MBX860 development board.  Actual serial support lies in
	neighbouring component HAL_QUICC [hal/powerpc/quicc/...]

	* include/hal_diag.h
	* include/plf_stub.h
	* include/pkgconf/hal_powerpc_mbx.h
	* include/pkgconf/mlt_powerpc_mbx_ram.ldi
	* include/pkgconf/mlt_powerpc_mbx_ram.mlt
	* include/pkgconf/mlt_powerpc_mbx_rom.ldi
	* include/pkgconf/mlt_powerpc_mbx_rom.mlt
	* src/PKGconf.mak
	* src/hal_diag.c
	* src/mbx.S
	New files.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
