2000-01-24  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: Depend on CYGSEM_HAL_ROM_MONITOR instead of
	CYG_HAL_ROM_MONITOR.

1999-09-28  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/intr0.c: Added some more debug output.

1999-09-23  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_exception_handler): Catch exceptions
	generated from within the GDB stub so we can recover from bad memory
	accesses
	Also part of the fix for case 102104

1999-09-23  Jesper Skov  <jskov@cygnus.co.uk>
        Case 102104
	* include/hal_cache.h (HAL_ICACHE_SYNC): Invalidate I cache.

1999-09-06  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (hal_null_call): 
	* src/vectors.S: 
	Trap calls to address 0.
	
1999-09-01  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/hal_misc.c: Clean up list of included files.  <hal.h>
	now provides target and platform specifics.

	* src/hal_intr.c: CYGFUN_HAL_COMMON_KERNEL_SUPPORT should only
	be defined if CYGPKG_KERNEL is defined.  This needs to be fixed
	in a more generic fashion when full CDL becomes available.

	* src/vectors.S: Exception and interrupt handling were enabling
	CPU interrupts when it wasn't safe nor warranted.

1999-08-16  Jesper Skov <jskov@cygnus.co.uk>
	From Bob Koninckx <bob.koninckx@mail.mech.kuleuven.ac.be>

	* src/ppc_stub.c (__clear_single_step): Clear irq_state to prevent
	interrupt avalanche.

1999-06-29  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_intr.h (CYGNUM_HAL_EXCEPTION_DATA_ACCESS): Define
	this for handling MACHINE_CHECK if an MPC860 - it never generates
	ISI nor DSI exceptions, only machine check.  This allows libc to
	catch SEGVs from this unexpected quarter.

1999-06-28  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/ppc_regs.h: Add proper definitions of timebase regs.

	* tests/intr0.c: Add some useful debugging printouts and recording
	of state, and make more platform-portable; the rate of PTA is not
	always 1:32 wrt the timebase.

1999-06-27  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/vectors.S (_start): Call platform dependent IRQ setup (see
	next note).

	* src/hal_intr.c (hal_IRQ_init): New platform dependent function
	used to setup whatever is necessary to handle interrupts.
	Add basic "wiring" of CPM to SIU interrupts.

	* include/hal_intr.h: Fix CPM interrupt macros - control register
	is 32 bits, not 16.

1999-06-24  Jesper Skov  <jskov@cygnus.co.uk>

	* misc/CPUMask8xx.c: Added.

1999-06-24  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_exception_handler): If the decrementer
	has underflowed when we are returning from an exception, then we
	reset it here; this is harmless if all is well, and required if
	the QUICC-equipped MPC860 is getting confused about interrupts
	following an exception.  Only in QUICC configurations.

1999-06-22  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/vectors.S (_start): Support breaking back into the stub ROM
	when we see a breakpoint, if RAM start and RAM-based vectors for
	the stub.  Rather than using a direct jump, instead skip copying
	the program exception vectors - leave the stub's vec in place.
	Controlled by CYGPRI_STUBROM_HAS_RAM_VECTORS, which varies from
	platform to platform.

1999-06-18  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_misc.c (hal_enable_caches): Change the configuration,
	the better to accommodate differing platform requirements viz a
	viz cache enabling and so on.

1999-06-17  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/vectors.S (CYG_MSR): define correctly for copying vectors,
	even if ROM start.  Complete system init for ROM start.

1999-06-15  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/ppc.inc: Add definitions of FUNC_START and FUNC_END.
	They are needed by platform code.

	* src/vectors.S: Remove definition of FUNC_START.

1999-06-11  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/vectors.S (_start): remove some platform-conditional
	initialization code; it is now in hal_hardware_init in the
	platform HAL.

	* src/hal_misc.c: remove very-platform-conditional definition of
	memory descriptor table - it is now in platform HALs.
	
	* include/ppc_regs.h: simplify definition of CYGARC_REG_IMM_BASE.

	* include/hal_cache.h (CYGARC_MEMDESC_CACHE): ...and other
	macros... add support for external definitions of memory
	descriptor table used in platform-specific initialization of MMU.

1999-06-10  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/vectors.S (_start): Add better support for various startup
	options, including CygMon loading.

	* src/PKGconf.mak (COMPILE): remove quicc_smc.c; it has been
	reorganized and renamed into the FADS component.

	* include/quicc_smc.h, src/ppc_860.h, src/quicc_smc.c: removed;
	reorganized and renamed into the FADS component.

	* src/hal_misc.c (hal_idle_thread_action): Add some useful
	debugging for interrupt/clock of the MBX860/PPC860; normally
	disabled, so no effect on code.

	* include/ppc_regs.h: Different default value for
	CYGARC_REG_IMM_BASE if MBX board (ie. the way CygMon sets it up).
	This is a temporary measure.

1999-06-08  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: 
	* src/vectors.S (hal_vsr_table): 
	* src/hal_misc.c (hal_default_decrementer_isr): 
	Use NOP default ISR for decrementer.
	Fix hal_intr macros.
	
1999-06-04  Jesper Skov  <jskov@cygnus.co.uk>
	PR 20146
	* src/ppc_860.h: Added padding to some structures, reported by
	Jean-Dominique Orvoen (orvoen@email.enst.fr)

1999-05-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_LOCK):
	Fixed asm constraint.

1999-05-25  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h:
	* src/vectors.S (hal_interrupt_stack_call_pending_DSRs): 
	Added call_pending_DSR magic.

1999-05-21  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_intr.h: Define HAL_INTERRUPT_STACK_BASE and
	HAL_INTERRUPT_STACK_TOP so that stack usage macros in
	kernel/.../stackmon.hxx can work.

	* src/vectors.S (cyg_interrupt_stack_base): Define this symbol for
	the interrupt stack and its friend for the stack top so that we
	can publish them with nice names.

1999-05-13  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Align stack
	(rather conservatively) before use.

1999-04-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak: 
	Remove the -n argument to tail, it does not appear to be required
	on any supported host and causes problems with some
	implementations of tail.

1999-04-19  Jesper Skov  <jskov@cygnus.co.uk>
        PR 19861
	* src/vectors.S (_start): Rewrote the hal_zero_bss code in
	assembly. When compiling with -O0 the C function accesses the
	previous stack frame upon return, causing a crash.

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/powerpc.ld: Define __bss_start/__bss_end around the BSS, and
	__sbss_start/__sbss_end around the SBSS
	* src/vectors.S (_start): Call C function to clear BSS.
	* src/hal_misc.c (hal_zero_bss): Use __bss_end rather than _end when
	clearing BSS. Clear SBSS similarly but separately since the MLT
	may have them in non-contiguous parts of memory.
	
	These fix PR 19750

1999-04-14  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Added HAL_xCACHE_IS_ENABLED macros.

1999-04-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/PKGconf.mak (EXTRAS): Don't generate extras.o here any more
	But do define EXTRAS every time for the linker script

1999-04-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c:
	Moved get_register and put_register to hal_stub.c.

1999-04-08  John Dallaway  <jld@cygnus.co.uk>

	* src/*.ld: Revised SECTION_* macro arguments to
	avoid padded output sections (PR 19787)

1999-04-07  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h (CYGNUM_HAL_STACK_SIZE_xxx): Increase to more
	realistic values.  PR 19748.

1999-03-31  Jesper Skov  <jskov@cygnus.co.uk>
        PR 19741
	* src/vectors.S:
	* src/ppc_stub.c (__computeSignal): 
	Added some comments about the use of MSR/SRR1. Masked out reserved
	bits of MSR before restoring it.
	
1999-03-23  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h: Added stack values.

1999-03-22  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/ppc_stub.h: Update copyright

	* src/ppc_stub.c: Update copyright

1999-03-22  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_arch.h: 
	Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of
	CYGNUM_HAL_MINIMUM_STACK_SIZE.

1999-03-22  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/intr0.c: 
	* include/ppc.inc: 
	* include/hal_arch.h:
	Cleaned up some FIX MEs.

1999-03-18  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc.inc: Removed exception safety margin.

1999-03-17  John Dallaway  <jld@cygnus.co.uk>

	* src/PKGconf.mak: Remove dependence on echo '-e' switch.

1999-03-16  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: Moved extern declarations out of function body
	to avoid compiler warnings.

1999-03-12  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h (CYGNUM_HAL_MINIMUM_STACK_SIZE): Increased to
	2kB for safety.

	* include/ppc.inc: Reduced exception stack frame safety gap
	to 64 bytes.

1999-03-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h (CYGNUM_HAL_MINIMUM_STACK_SIZE): 
	Added HAL stack size definition.

1999-03-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_INTERRUPT_IN_USE): Added.

1999-03-08  Nick Garnett  <nickg@cygnus.co.uk>

	* src/powerpc.ld:
	Added alignment before definition of __DEVTAB__.	

1999-03-08  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: Removed workaround.

1999-03-05  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (cyg_hal_interrupt_set_level): Disable this
	function as a temporary workaround to PR 19400.

1999-03-05  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/PKGconf.mak: 
	* src/powerpc.ld: Clean up I/O package changes.

1999-03-04  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/powerpc.ld:
	Add INPUT(libextras.a), add libextras.a to GROUP() and include
	new section for device driver table

1999-02-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: Removed FIX ME.

1999-02-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h:
	* src/ppc_stub.c (__computeSignal): 
	Renamed CYGNUM_HAL_HWVECTOR_DECREMENTER to
	CYGNUM_HAL_VECTOR_DECREMENTER.

1999-02-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Changed label used to access scheduler lock to one that is not
	mangled by C++. This is intended to make support for interrupt
	handling in non-kernel configurations easier.

1999-02-23  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (__computeSignal): Renamed
	CYGNUM_HAL_VECTOR_DECREMENTER to CYGNUM_HAL_HWVECTOR_DECREMENTER.

1999-02-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_arch.h: 
	Rename deliver_exception() -> cyg_hal_deliver_exception()

	* include/hal_intr.h:
	Reorganise vector/interrupt/exception names according to purpose
	Add decoded exception vectors (decoded from PROGRAM exception)
	QA improvements

	* include/ppc_regs.h:
	Add defines for access to SRR0 and SRR1 registers

	* src/hal_intr.c:
	Rename CYG_VECTOR_* according to hal_intr.h changes above
	QA improvements

	* src/hal_misc.c:
	Decode PROGRAM vector using SSR1 register
	QA improvements

	* src/ppc_stub.c:
	Rename CYG_VECTOR_* according to hal_intr.h changes above

	* src/quicc_smc.c:
	Add a FIX ME

	* src/vectors.S:
	Rename exception_handler -> cyg_hal_exception_handler

	* tests/intr0.c:
	Rename CYG_VECTOR_* -> CYGNUM_HAL_INTERRUPT_* due to hal_intr.h
	changes above

1999-02-17  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (__computeSignal): Moved special GDB signal
	handling to generic-stub.c.

1999-02-17  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (hal_default_isr): Always print out vector number
	in hal_default_interrupt.

1999-02-16  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Changed set_debug_traps to initialize_stub.

	* src/ppc_stub.c: 
	* include/ppc_stub.h: 
	Cleaned up to only include arch specific stub code.

1999-02-05  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c: 
	* src/hal_misc.c: 
	* src/hal_intr.c: 
	* src/vectors.S: 
	* include/ppc_regs.h: 
	* include/hal_intr.h: 
	* include/hal_cache.h: 
        Cleaned up the MPC823/850 code.

1999-02-05  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_CLOCK_LATENCY): Return 0 when the result
	is due to a bogus timer interrupt.

1999-02-05  John Dallaway  <jld@cygnus.co.uk>

	* src/powerpc.ld: Add LMA_EQ_VMA macro definition.

1999-01-29  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: 
	* src/ppc_stub.c: 
	* src/vectors.S: 
	* include/ppc_regs.h: 
	* include/hal_intr.h: 
	* include/hal_cache.h:
	Added MPC823/850 support. Some of it needs cleaning up a bit.

1999-01-22  Jesper Skov  <jskov@cygnus.co.uk>
        PR 18879
	* include/quicc_smc.h:
	* src/quicc_smc.c:
	Fix compiler warnings.

1999-01-22  Jesper Skov  <jskov@cygnus.co.uk>

	* include/quicc_smc.h:
	* src/ppc_860.h:
	* src/quicc_smc.c:
	Added UNSUPPORTED headers.

1999-01-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_invoke_constructors): 
	Add code to deal with CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG
	Tidy up and update description header
	Shorten needlessly long lines

	* src/vectors.S:
	Remove all traces of non-CYG_KERNEL_USE_INIT_PRIORITY code
	Tidy up and update description header
	Shorten needlessly long lines

1999-01-21  Jesper Skov  <jskov@cygnus.co.uk>
        Merge with FADS branch.

        1998-12-17  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_860.h: Added as private header.

	* src/PKGconf.mak (COMPILE): Added quicc_smc.c.

	* include/quicc_smc.h: Prefix exported names with cyg_.

	* src/quicc_smc.c: Use ppc_860.h as a private header.
	Made all but the necessary functions static. Prefixed the rest
	with cyg_.
	Moved the RS232 interface enabling here from hal_diag since it
	is apparently required by both hal_stub and hal_diag.

1999-01-20  Jesper Skov  <jskov@cygnus.co.uk>

	* src/powerpc.ld (SECTION_bss): Added align statement.

1999-01-20  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Changed _STUB to _STUBS. 

1999-01-19  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: 
	* src/hal_misc.c (hal_enable_caches):
	Also support HAL_STARTUP_STUB.
	
1999-01-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c:
	* src/hal_intr.c: 
	Move external declarations out of functions.

1999-01-14  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_start): Copy data to RAM before calling C
	functions (or "don't initialize the MMU with random data").

	* src/hal_misc.c: ROM is cache inhibited.

1999-01-13  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h: CYG_DOUBLE_BYTEORDER now in <infra/cyg_type.h>

1999-01-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h (CYG_DOUBLE_BYTEORDER): Define ordering
	for words within double.

1999-01-11  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_io.h: Fixed indentation.

1999-01-05  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_CLOCK_RESET): Undid below change;
	doesn't always work.

1998-12-15  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_CLOCK_RESET): Add rather than store to
	avoid wall-clock drift.

1998-12-11  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Cleaned up code to use r14/r15 during
	interrupt/exception handling, which is necessary to support
	-msdata.
	Put hal tables in sdata section when smaller than threshold.
	
1998-12-11  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Defined three more macros.

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Defined three more macros.

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Make the program exception jump to ROM if no GDB
	stub was configured.

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Added HAL_ICACHE_UNLOCK_ALL and
	HAL_DCACHE_UNLOCK_ALL for sim (unused).

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Defined cache locking macros. Changed
	invalidate macros not to unlock.

	* include/ppc_regs.h: Added some instruction cache definitions.

	* src/hal_misc.c (hal_enable_caches): Unlock caches before
	invalidating.

1998-12-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (hal_enable_caches): Don't enable caches when
	configured for ROM.

1998-12-09  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: TBx_W are SPR registers.

	* src/vectors.S (_init_CPU, _start): Added a few sync instructions.

1998-12-08  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h (CYGARC_REG_IMM_OR_CSNT): Fixed typo.

1998-12-08  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: Added more definitions.

1998-12-07  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_init_CPU): Proper solution to the problem of
	MMU/cache initialization.

1998-12-07  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_start): Map RAM before accessing it. Only
	disable MMU just before (re)programming it.

1998-12-04  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_intr.c:
	* src/hal_intr.cxx:
	* src/PKGconf.mak:
	Renamed hal_intr.cxx to hal_intr.c.
	
1998-12-04  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/intr0.c: Improved somewhat. Also fixes PR 18440.

	* src/hal_intr.cxx:
	* src/PKGconf.mak:
	Added hal_intr.cxx.

	* include/ppc_regs.h: More register definitions.

	* include/hal_intr.h: Handle decrementer in HAL_INTERRUPT_ mask
	and configure macros.
	Added declarations for interrupt arbiters.

1998-12-02  Jesper Skov  <jskov@cygnus.co.uk>
        PR 18425

	* src/vectors.S:
	* include/ppc_regs.h:
	* include/hal_intr.h:
	Prefixed remaining definitions used by hal_intr.h.

	* include/hal_intr.h:
	Added more definitions. Fixed wrong TBx_R values.

1998-12-01  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/PKGconf.mak:
	* tests/intr0.c:
	First simple test of 860 specific interrupt handling.

	* src/vectors.S (__default_interrupt_vsr): Don't shift decoded
	vector number.

	* src/hal_misc.c (hal_clear_MMU): Added.
	(hal_MMU_init): Call hal_clear_MMU to ensure a sane MMU state.

	* include/ppc_regs.h: Added even more definitions.

	* include/hal_intr.h: Fixed interrupt functions to deal with
	interleaved IRQ/LVL vectors.

1998-11-30  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr): Always call
	cyg_hal_gdb_isr when GDB_BREAK support is enabled.
	Added comment about nesting.

1998-11-30  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: Added a few more definitions.

	* src/vectors.S (decode_interrupt): Added 1st level arbitration
	for MPC860.

	* include/hal_intr.h: Added (properly ordered) LVL vectors.
	Changed if/else to switch/case.
	Added configuration of priorities/level.

1998-11-30  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (decode_interrupt): Update the vector in the state
	frame.

1998-11-27  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: Added more 860 IMM registers.

	* include/hal_io.h: Changed HAL_IO_BARRIER so it can be used from
	C++.

	* include/hal_intr.h: First part of 860 interrupt controller
	support.

	* src/vectors.S: 
	* include/hal_intr.h:
	Exchanged extern and decrementer interrupt ISR vectors to allow
	more sensible extension.
	
1998-11-27  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: The memory map descriptor table is now weakly
	defined so applications can override it.

1998-11-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: 
	* src/hal_misc.c (hal_map_memory):
	Added handling of Guarded attribute.

1998-11-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h: Added definition for magic constant.

1998-11-26  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: 
	* include/hal_arch.h: 
	* include/ppc.inc:
	Moved SPR definitions to ppc_regs.h.
	
1998-11-26  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: 
	* src/ppc_stub.c: 
	* src/hal_misc.c: 
	Changes due to ppc_regs.h cleanup.

	* src/ppc_stub.h: Added convenience definition for SP register.

	* include/ppc_regs.h: Got rid of GDB register definitions.
	Cleaned up a bit.

	* include/ppc_regs.h: 
	* include/hal_cache.h: 
	Prefixed register names with CYGARC_REG_ to avoid name space
	pollution.

	* include/hal_arch.h: 
	* src/context.S: 
	Replaced magic constants in jmpbuf with defines.

1998-11-25  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__start): Got rid of a few magic constants.

	* include/hal_intr.h (HAL_CLOCK_INITIALIZE,
	HAL_CLOCK_RESET): Cleaned up a bit.

	* include/ppc_regs.h: Added DC_ADR_ and TBU/TBL macros.

	* include/hal_cache.h: Got rid of a few magic constants. 
	Changed types in cyg_memdesc_t. 
	* src/hal_misc.c (hal_map_memory): Changed argument types.

	* include/hal_arch.h: Changed a few comments.

1998-11-23  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Cleaned up CYG_MSR definition.

	* src/hal_misc.c (mem_map): Added mapping for SIM.
	(hal_map_memory): Added 603 BAT mapping.

	* include/ppc_regs.h: Added definitions for BATs.

1998-11-19  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: 
	* include/hal_cache.h: 
	Use operand constants to pass macro values to assembly code.

1998-11-18  Jesper Skov  <jskov@cygnus.co.uk>

	* src/context.S: 
	* include/ppc.inc: 
	* include/hal_arch.h:
	Improved GDB thread info output by making a context switch frame
	look like an exception/interrupt frame.
	
1998-11-18  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_intr.h: Add support for interrupt latency
	measurements, controlled by CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY.

1998-11-18  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc.inc: Renamed CYG_HAL_POWERPC_MP860 to
	CYG_HAL_POWERPC_MPC860.

1998-11-17  Jesper Skov  <jskov@cygnus.co.uk>

	* hal/powerpc/arch/current/include/hal_cache.h
	* hal/powerpc/arch/current/include/hal_intr.h
	* hal/powerpc/arch/current/include/ppc_regs.h
	* hal/powerpc/arch/current/src/hal_misc.c
	* hal/powerpc/arch/current/src/ppc_stub.c
	* hal/powerpc/arch/current/src/vectors.S
	Renamed CYG_HAL_POWERPC_MP860 to CYG_HAL_POWERPC_MPC860.

1998-11-16  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S:
	* include/hal_intr.h: 
	Added vector translation.

	* src/vectors.S: Use r14 instead of r15 in interrupt handler.

1998-11-09  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Added memory mapping structure.

	* src/hal_misc.c (hal_MMU_init): Cleaned up memory mapping.

1998-11-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (hal_enable_caches): Also disable serialization.

	* include/ppc_regs.h: Added more register definitions.

1998-11-06  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Don't enable MMU when target is SIM. Caches are
	not used anyway, and there's a serious performance hit.
	(added comment).

1998-11-04  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Proper separation of SIM and MPC860 cache
	defines.

1998-11-04  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (cyg_hal_gdb_interrupt,
	cyg_hal_gdb_remove_break): Add cache flushes after fiddling with
	the program data.

	* src/vectors.S (__default_interrupt_vsr,
	__default_exception_vsr): Enable MMU on entry.

1998-11-04  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Make calls to MMU init function and cache
	enabling function. Enable MMU.

	* src/hal_misc.c (hal_map_memory, hal_MMU_init,
	hal_enable_caches): Added.

	* include/ppc_regs.h: Added MMU register definitions.

	* include/hal_cache.h: Enabled cache macros and made them work
	properly.

1998-11-02  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_stub.h: 
	* src/ppc_stub.c (cyg_hal_gdb_interrupt,
	cyg_hal_gdb_remove_break): New names for the new GDB BREAK support
	functions.

1998-11-02  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr): Fill r15 before doing
	cyg_hal_gdb_isr call, or it might be skipped.
	cyg_hal_gdb_isr now takes PC as first argument.

	* src/ppc_stub.c:
	* src/ppc_stub.h:
	Added proper GDB interrupt support.

1998-10-27  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Also save registers 13-15 in minimum context for
	convenience.

1998-10-25  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Removed pkgconf/kernel.h include fix-me.

1998-10-23  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_stub.h: Include generic-stub.h from hal.

Fri Oct 23 04:47:11 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_cache.h: 
	Include HAL configuration file to be sure we get all the right
	defines. This is a potential problem, that I had thought may be
	the cause of PR 17839, but that turned out to be a config tool
	problem
	
1998-10-16  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S (__interrupt_stack):
	Made the interrupt stack size configurable.

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (__computeSignal): Use SIGSYS for 'sc'
	exceptions.

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>
        PR 17808

	* include/hal_arch.h (HAL_JMP_BUF_SIZE): Increased to 23.

	* src/context.S (hal_setjmp, hal_longjmp): Also save CR[2-4].

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: CYGDBG_KERNEL_DEBUG_GDB_INCLUDE_STUBS changed to
	CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS.

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c: Replaced include <signal.h> with SIGxxx
	definitions.

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c: Graceful error if attempted compiled for
	simulator. 
	Also do proper include of dbg-threads-api.h.

	* src/vectors.S: Changed CYG_HAL_GDB_BREAK to
	CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT.

1998-10-15  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (single_step, clear_single_step): Disable
	interrupts when doing a single-step.

1998-10-14  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_io.h: 
	* src/ppc_stub.c: 
	* src/hal_misc.c:
	Minor modifications to permit building without kernel.

1998-10-14  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_QUERY_INTERRUPTS): Fixed to do the right
	thing.

1998-10-13  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/ppc_stub.c: 
	* src/hal_misc.c: 
	Added thread support. Primarily a change in the way registers are
	accessed.

 	* include/hal_arch.h (HAL_GET_GDB_REGISTERS,
	HAL_SET_GDB_REGISTERS): Added a few more registers.

1998-10-12  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* Reverted below to avoid problems with test farm. Waiting for
	approval of other diffs.

1998-10-12  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/ppc_stub.c: 
	* src/hal_misc.c: 
	Added thread support. Primarily a change in the way registers are
	accessed.

 	* include/hal_arch.h (HAL_GET_GDB_REGISTERS,
	HAL_SET_GDB_REGISTERS): Added a few more registers.

1998-10-12  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/ppc_stub.h: Added CYGONCE protection.
	Fixed warning.

1998-10-09  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: Added HAL_TRANSLATE_VECTOR.

1998-10-08  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Protect kernel.h inclusion by CYGPKG_KERNEL.

1998-10-08  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/hal_arch.h
	* include/ppc_regs.h
	* src/hal_misc.c
	Changed /**/ comments to //.

1998-10-08  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/makefile: Removed.

1998-10-08  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/basetype.h:
	* include/hal_arch.h:
	* include/hal_cache.h:
	* include/hal_intr.h:
	* include/hal_io.h:
	* include/ppc_regs.h:
	* include/pkgconf/hal_powerpc.h:
	* src/context.S:
	* src/hal_misc.c:
	* src/vectors.S:
	Expanded TABs.

1998-10-08  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/vectors.S: Added GDB interrupt support.
	Call GDB stub init at startup.

1998-10-08  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/ppc_regs.h: Added defines for Internal Memory Map. Added
	CYGONCE protection.

1998-10-07  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_io.h: Enforce in-order IO.

1998-10-01  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_start): Comment change.

	* include/hal_intr.h: Added empty HAL_INTERRUPT_SET_LEVEL macro.

Thu Sep 17 17:40:01 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/vectors.S: Simulator does not support DER register.

1998-09-14  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak: 
	Made vectors.o dependent on the various files that can contain
	makefile variables or rules. This is needed after changes to
	pkgconf.tcl for PRs 17195 and 17286.

1998-09-12  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_powerpc.h:
	Added missing descriptions (PR 17184)

	* src/hal_misc.c (exception_handler): 
	Sort out exception handling options (PR 16953)

Fri Sep  4 12:03:54 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/context.S: Always save/restore CR as the compiler may only
	do a partial restore.

Thu Sep  3 10:12:46 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h: Replaced CACHE macros with dummies. The
	errata for the revision A.2 MPC860 is pretty grim wrt cache side
	effects.
	
	* include/hal_cache.h: 
	* include/hal_io.h: 
	* include/hal_arch.h: 
	* include/hal_intr.h:
 	Wrapped multi-line macros with CYG_MACRO_START/END.

1998-09-02  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_powerpc.h:
	New header file for architecture-specific configuration options

	* tests/PKGconf.mak: 
	* src/PKGconf.mak: 
	Sort out package naming conventions.

1998-09-01  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	Added CYG_VSR_COUNT, CYG_EXCEPTION_COUNT and CYG_ISR_COUNT.

Tue Sep  1 14:43:48 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_SYNC): Write data in the cache
	back to memory.
	(HAL_ICACHE_SYNC): Do nothing.

Tue Sep  1 10:26:10 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: Define empty __eabi to override compiler
	generated version of the same.

Mon Aug 31 16:32:34 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_invoke_constructors): Renamed from
	__eabi.

Mon Aug 31 16:31:18 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_start): Call C++ constructors.

Mon Aug 31 15:32:22 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__default_interrupt_vsr): Added config options:
	CYGFUN_HAL_COMMON_KERNEL_SUPPORT and
	CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK.
	(restore_state): Moved from bottom of __default_exception_vsr to
	bottom of __default_interrupt_vsr.

Mon Aug 31 13:33:04 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c (__computeSignal): Added handling of MC860
	specific exceptions.
	Made VECTOR_PROGRAM decode actual exception type.

	* include/hal_intr.h: Defined MC860 specific vectors.

Mon Aug 31 10:12:44 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: 
	* src/vectors.S:
	Added ha_default_isr.

	* include/hal_cache.h:
	* include/ppc_regs.h:
	Defined HAL_DCACHE_x macros.

	* include/hal_arch.h:
	* src/hal_misc:
	Added hal_idle_thread_action.

1998-08-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S, src/context.S, src/hal_misc.c, src/ppc_stub.c,
	include/hal_intr.h : 
	Updated for new kernel configuration option symbol names

Fri Aug 28 17:55:46 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Added some more comments.
 	(_start): Disable 860 "Development Support" as it breaks PowerPC
	standard single-stepping exceptions.

	* src/ppc_stub.c: Handle single-step exceptions properly. Also
	enable exception-after-branch.

Fri Aug 28 17:41:34 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_regs.h: Added some more definitions.

	* include/hal_cache.h: Defined HAL_ICACHE_x macros.

	* include/hal_arch.h (HAL_BREAKINST): Use same opcode as GDB.

Fri Aug 28 10:11:06 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/vectors.S (_start): 
	Change call of main() to cyg_start(), and change comments
	accordingly. Definitely never call exit().

Thu Aug 27 15:30:27 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/ppc_stub.h (REGSIZE): Floats are 64 bit.

Thu Aug 27 13:58:16 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: Removed GDB C-C stuff again.

Wed Aug 26 16:05:53 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (hal_ctrlc_isr, hal_init_ctrlc_intr):
	Added GDB C-C support (temporary location).

Wed Aug 26 15:12:31 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c (__eabi): Changed to match the constructor table
	generated by the linker script.

Wed Aug 26 09:38:07 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h (HAL_GET_GDB_REGISTERS): Fixed typo.
	(HAL_SET_GDB_REGISTERS): Same.

1998-08-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Now pass pointer to saved registers as third argument to
	interrupt_end().

	* include/hal_arch.h:
	Added macros to support GDB.

Tue Aug 25 16:57:27 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/ppc_stub.c: Comment changes.

Tue Aug 25 11:11:49 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_INTERRUPT_ATTACH): Added cast to avoid
	compiler warning.

Tue Aug 25 11:08:00 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h (HAL_REORDER_BARRIER): Added side effect to
 	"memory".

Mon Aug 24 13:15:07 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/ppc_stub.h: Corrected NUMREGS.

Mon Aug 24 11:14:08 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (__default_exception_vsr): Don't access register
	hid0.

Mon Aug 24 10:37:04 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S (_start): Removed non-functional OCD control.

1998-08-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h:
	Now includes cyg_type.h rather than ktypes.h.	

Thu Aug 20 17:43:50 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/vectors.S: Disable OCD control to allow debugging of gdb
	 	stub.
		
	* src/vectors.S: Temporary stack definition.

Thu Aug 20 17:37:10 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/hal_misc.c: Added GDB stub support.

	* include/ppc.inc: Added some 860 register definitions.

	* include/hal_arch.h: Added breakpoint stuff.

Thu Aug 20 16:07:03 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* src/PKGconf.mak: Include GDB support files.

Thu Aug 20 16:00:21 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/ppc_stub.h:
	* include/ppc_regs.h:
	* src/ppc_stub.c:
	Added for GDB support.

Tue Aug 18 18:44:00 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: 
	* include/hal_arch.h:
	Use cyg_type.h rather than ktypes.h.

Tue Aug 18 18:38:43 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/basetype.h: Fixed typo.

1998-08-18  Nick Garnett  <nickg@cygnus.co.uk>

	* src/context.S: 
	* src/hal_misc.c: 
	* include/hal_intr.h: 
	* src/vectors.S:
	Now uses hal.h rather than kernel.h.

Mon Aug 17 16:23:46 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_DISABLE_INTERRUPTS): Fix MACRO line
	continuation.
	(HAL_RESTORE_INTERRUPTS): Same.

//===========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//===========================================================================
