2003-10-08  Roland Caßebohm  <roland.cassebohm@visionsystems.de>

        * include/plf_io.h: Correct (unused) defines for
        KS32C_ROMCON_BASE_MASK, KS32C_ROMCON_NEXT_MASK, 
        KS32C_DRAMCON_BASE_MASK and KS32C_DRAMCON_NEXT_MASK.

2003-09-21  Gary Thomas  <gary@mlbassoc.com>

	* misc/redboot_RAM.ecm: 
	* misc/redboot_ROM.ecm:  Adjust for changes in RedBoot
	template - DNS now must be enabled manually.

2003-07-18  Nick Garnett  <nickg@balti.calivar.com>

	* cdl/hal_arm_snds.cdl:
        Changed values for CYGNUM_HAL_RTC_NUMERATOR,
        CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
        "default_value" from "calculated". This makes it easier
        to change these values globally.
        
2002-10-19  Jonathan Larmour  <jifl@eCosCentric.com>

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Only define if
	ROM or ROMRAM, not if STUBS which can be RAM.

2003-02-05  Nick Garnett  <nickg@calivar.com>

	* include/plf_io.h (CYGARC_PHYSICAL_ADDRESS): Added this
	definition to keep redboot_linux_exec.c happy.

2002-10-03  Jonathan Larmour  <jifl@eCosCentric.com>

	* include/pkgconf/mlt_arm_snds_ram.ldi: Add definition of heap1.

2002-05-07  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_arm_snds.cdl: 
	Standardize CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT usage.

2001-12-06  Jesper Skov  <jskov@redhat.com>

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Don't trust the
	syscfg SDRAM request bit as suggested by manual - always set it to
	what works. Use relative loads to get a pointer to the tables with
	system controller setup data.

	* src/snds100_misc.c: Don't mess up the syscfg register.

2001-10-19  Jesper Skov  <jskov@redhat.com>

	* include/plf_io.h (KS32C_REFEXTCON): Split in DRAM and SDRAM
	settings.

	* include/hal_platform_setup.h: Fix KS32C_REFEXTCON parameters,
	and set some LEDs to help debugging.

	* cdl/hal_arm_snds.cdl: On the SNDS100 board the CPU runs at
	50MHZ.

	* include/pkgconf/mlt_arm_snds_rom.ldi: Moved flash to
	0x01800000.
	* include/pkgconf/mlt_arm_snds_rom.mlt: Same.
	* include/pkgconf/mlt_arm_snds_rom.h: Same.

	* include/hal_platform_setup.h: Added LED macro. Use relative
	branch in reset vector. Moved flash to 0x01800000.

2001-10-18  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Definition names updated.
	* src/snds100_misc.c: Same.

	* include/pkgconf/mlt_arm_snds_rom.ldi: Added.
	* include/pkgconf/mlt_arm_snds_rom.mlt: Same.
	* include/pkgconf/mlt_arm_snds_rom.h: Same.

	* include/pkgconf/mlt_arm_snds_ram.ldi: Updated layout.
	* include/pkgconf/mlt_arm_snds_ram.mlt: Same.
	* include/pkgconf/mlt_arm_snds_ram.h: Same.

	* include/hal_platform_setup.h: Fixed instruction typo.

	* include/hal_platform_ints.h: Vector definitions renamed to match
	those in E7T HAL.

	* include/hal_cache.h: Replaced with E7T HAL version.

	* cdl/hal_arm_snds.cdl: Added default baud rate option, ROM
	startup mode, and removed PID tools make rules.

2001-10-12  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Copied here from E7T HAL.
	* src/snds100_misc.c: Functions replaced with E7T HAL
	versions.

	* include/plf_io.h: Added.

	* include/hal_platform_setup.h (PLATFORM_SETUP1): Code matching
	board mon.

2001-10-05  Jonathan Larmour  <jlarmour@redhat.com>

	* include/hal_cache.h: Don't define cache dimensions at all rather
	than using 0.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

	* src/snds100_misc.c: 
	* src/hal_diag.c: 
	printf() is no longer a part of RedBoot.  Thus all programs
	must use diag_printf() and related functions instead.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
