new file mode 100644
--- /dev/null
+++ b/host/tools/configtool/standalone/common/Makefile.in
@@ -0,0 +1,468 @@
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+#####COPYRIGHTBEGIN####
+#                                                                          
+# -------------------------------------------                              
+# The contents of this file are subject to the Red Hat eCos Public License 
+# Version 1.1 (the "License"); you may not use this file except in         
+# compliance with the License.  You may obtain a copy of the License at    
+# http://www.redhat.com/                                                   
+#                                                                          
+# Software distributed under the License is distributed on an "AS IS"      
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
+# License for the specific language governing rights and limitations under 
+# the License.                                                             
+#                                                                          
+# The Original Code is eCos - Embedded Configurable Operating System,      
+# released September 30, 1998.                                             
+#                                                                          
+# The Initial Developer of the Original Code is Red Hat.                   
+# Portions created by Red Hat are                                          
+# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
+# All Rights Reserved.                                                     
+# -------------------------------------------                              
+#                                                                          
+######COPYRIGHTEND####
+#######DESCRIPTIONBEGIN####
+######DESCRIPTIONEND####
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+CC = @CC@
+CXX = @CXX@
+EXEEXT = @EXEEXT@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+cyg_ac_cdl_incdir = @cyg_ac_cdl_incdir@
+cyg_ac_cdl_libdir = @cyg_ac_cdl_libdir@
+cyg_ac_cdl_libraries = @cyg_ac_cdl_libraries@
+cyg_ac_infra_incdir = @cyg_ac_infra_incdir@
+cyg_ac_infra_libdir = @cyg_ac_infra_libdir@
+cyg_ac_infra_libraries = @cyg_ac_infra_libraries@
+cyg_ac_tcl_incdir = @cyg_ac_tcl_incdir@
+cyg_ac_tcl_libdir = @cyg_ac_tcl_libdir@
+cyg_ac_tcl_libs = @cyg_ac_tcl_libs@
+cyg_ac_tcl_version = @cyg_ac_tcl_version@
+cyg_ac_tk_libs = @cyg_ac_tk_libs@
+win_srcdir = @win_srcdir@
+
+AUTOMAKE_OPTIONS = 1.3 cygnus
+SUBDIRS = 
+
+INCLUDES = -I@cyg_ac_infra_incdir@ -I@cyg_ac_cdl_incdir@ -I@cyg_ac_tcl_incdir@ -I@win_srcdir@/../../common/common
+@MSVC_TRUE@LIBS = @cyg_ac_cdl_libraries@ @cyg_ac_infra_libraries@ @cyg_ac_tcl_libs@           -link -libpath=@cyg_ac_infra_libdir@ -libpath=@cyg_ac_cdl_libdir@ -libpath=@cyg_ac_tcl_libdir@
+@MSVC_FALSE@LIBS = -L@cyg_ac_infra_libdir@ -L@cyg_ac_cdl_libdir@ -L@cyg_ac_tcl_libdir@            $(foreach x,@cyg_ac_cdl_libraries@,-l$x)            $(foreach x,@cyg_ac_infra_libraries@,-l$x)            @cyg_ac_tcl_libs@
+
+BUILT_SOURCES = build.cxx flags.cxx
+bin_PROGRAMS = ecosconfig
+ecosconfig_SOURCES = ecosconfig.cxx cdl_exec.cxx build.cxx flags.cxx
+@MSVC_TRUE@ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/cdl.lib @cyg_ac_infra_libdir@/cyginfra.lib
+@MSVC_FALSE@ecosconfig_DEPENDENCIES = @cyg_ac_cdl_libdir@/libcdl.a @cyg_ac_infra_libdir@/libcyginfra.a
+
+noinst_HEADERS = cdl_exec.hxx ecosconfig.hxx
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+bin_PROGRAMS =  ecosconfig$(EXEEXT)
+PROGRAMS =  $(bin_PROGRAMS)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) 
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+ecosconfig_OBJECTS =  ecosconfig.$(OBJEXT) cdl_exec.$(OBJEXT) \
+build.$(OBJEXT) flags.$(OBJEXT)
+ecosconfig_LDADD = $(LDADD)
+ecosconfig_LDFLAGS = 
+CXXFLAGS = @CXXFLAGS@
+CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  ChangeLog Makefile.am Makefile.in acinclude.m4 aclocal.m4 \
+configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+SOURCES = $(ecosconfig_SOURCES)
+OBJECTS = $(ecosconfig_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .cxx .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
+	cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+	     $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	done
+
+.c.o:
+	$(COMPILE) -c $<
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+ecosconfig$(EXEEXT): $(ecosconfig_OBJECTS) $(ecosconfig_DEPENDENCIES)
+	@rm -f ecosconfig$(EXEEXT)
+	$(CXXLINK) $(ecosconfig_LDFLAGS) $(ecosconfig_OBJECTS) $(ecosconfig_LDADD) $(LIBS)
+.cxx.o:
+	$(CXXCOMPILE) -c $<
+.cxx.obj:
+	$(CXXCOMPILE) -c `cygpath -w $<`
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am:
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-info-am: 
+install-info: install-info-recursive
+install-exec-am: install-binPROGRAMS
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am: uninstall-binPROGRAMS
+uninstall: uninstall-recursive
+all-am: Makefile $(PROGRAMS) $(HEADERS)
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs)  $(DESTDIR)$(bindir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
+		mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-binPROGRAMS clean-compile clean-tags clean-generic \
+		mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-binPROGRAMS distclean-compile distclean-tags \
+		distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-binPROGRAMS \
+		maintainer-clean-compile maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile install-data-recursive \
+uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-info-am \
+install-info install-exec-am install-exec install-data-am install-data \
+install-am install uninstall-am uninstall all-redirect all-am all \
+installdirs-am installdirs mostlyclean-generic distclean-generic \
+clean-generic maintainer-clean-generic clean mostlyclean distclean \
+maintainer-clean
+
+
+build.cxx: ../../common/common/build.cxx
+	$(INSTALL) $< $@
+
+flags.cxx: ../../common/common/flags.cxx
+	$(INSTALL) $< $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: