new file mode 100644
--- /dev/null
+++ b/packages/hal/sh/arch/current/src/sh3_sci.c
@@ -0,0 +1,303 @@
+//=============================================================================
+//
+//      sh3_sci.c
+//
+//      Simple driver for the SH Serial Communication Interface (SCI)
+//
+//=============================================================================
+//####COPYRIGHTBEGIN####
+//                                                                          
+// -------------------------------------------                              
+// The contents of this file are subject to the Red Hat eCos Public License 
+// Version 1.1 (the "License"); you may not use this file except in         
+// compliance with the License.  You may obtain a copy of the License at    
+// http://www.redhat.com/                                                   
+//                                                                          
+// Software distributed under the License is distributed on an "AS IS"      
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
+// License for the specific language governing rights and limitations under 
+// the License.                                                             
+//                                                                          
+// The Original Code is eCos - Embedded Configurable Operating System,      
+// released September 30, 1998.                                             
+//                                                                          
+// The Initial Developer of the Original Code is Red Hat.                   
+// Portions created by Red Hat are                                          
+// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
+// All Rights Reserved.                                                     
+// -------------------------------------------                              
+//                                                                          
+//####COPYRIGHTEND####
+//=============================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):   jskov
+// Contributors:jskov
+// Date:        1999-05-17
+// Description: Simple driver for the SH Serial Communication Interface
+//              Clients of this file can configure the behavior with:
+//              CYGNUM_SCI_PORTS:  number of SCI ports
+//
+//####DESCRIPTIONEND####
+//
+//=============================================================================
+
+#include <pkgconf/hal.h>
+
+#ifdef CYGNUM_HAL_SH_SH3_SCI_PORTS
+
+#include <cyg/hal/hal_io.h>             // IO macros
+#include <cyg/hal/drv_api.h>            // CYG_ISR_HANDLED
+#include <cyg/hal/hal_misc.h>           // Helper functions
+#include <cyg/hal/hal_intr.h>           // HAL_ENABLE/MASK/UNMASK_INTERRUPTS
+#include <cyg/hal/hal_arch.h>           // SAVE/RESTORE GP
+#include <cyg/hal/hal_if.h>             // Calling-if API
+#include <cyg/hal/sh_regs.h>            // serial register definitions
+
+#include <cyg/hal/sh3_sci.h>            // our header
+
+//--------------------------------------------------------------------------
+
+void
+cyg_hal_plf_sci_init_channel(const channel_data_t* chan)
+{
+    cyg_uint8 tmp;
+    cyg_uint8* base = chan->base;
+
+    // Disable Tx/Rx interrupts, but enable Tx/Rx
+    HAL_WRITE_UINT8(base+_REG_SCSCR,
+                    CYGARC_REG_SCSCR_TE|CYGARC_REG_SCSCR_RE);
+
+    // 8-1-no parity.
+    HAL_WRITE_UINT8(base+_REG_SCSMR, 0);
+
+    // Set speed to 38400
+    HAL_READ_UINT8(base+_REG_SCSMR, tmp);
+    tmp &= ~CYGARC_REG_SCSMR_CKSx_MASK;
+    tmp |= CYGARC_SCBRR_CKSx(38400);
+    HAL_WRITE_UINT8(base+_REG_SCSMR, tmp);
+    HAL_WRITE_UINT8(base+_REG_SCBRR, CYGARC_SCBRR_N(38400));
+}
+
+static cyg_bool
+cyg_hal_plf_sci_getc_nonblock(void* __ch_data, cyg_uint8* ch)
+{
+    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
+    cyg_uint8 sr;
+
+    HAL_READ_UINT8(base+_REG_SCSSR, sr);
+    if ((sr & CYGARC_REG_SCSSR_RDRF) == 0)
+        return false;
+
+    HAL_READ_UINT8(base+_REG_SCRDR, *ch);
+
+    // Clear buffer full flag.
+    HAL_WRITE_UINT8(base+_REG_SCSSR, sr & ~CYGARC_REG_SCSSR_RDRF);
+
+    return true;
+}
+
+cyg_uint8
+cyg_hal_plf_sci_getc(void* __ch_data)
+{
+    cyg_uint8 ch;
+    CYGARC_HAL_SAVE_GP();
+
+    while(!cyg_hal_plf_sci_getc_nonblock(__ch_data, &ch));
+
+    CYGARC_HAL_RESTORE_GP();
+    return ch;
+}
+
+void
+cyg_hal_plf_sci_putc(void* __ch_data, cyg_uint8 c)
+{
+    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
+    cyg_uint8 sr;
+    CYGARC_HAL_SAVE_GP();
+
+    do {
+        HAL_READ_UINT8(base+_REG_SCSSR, sr);
+    } while ((sr & CYGARC_REG_SCSSR_TDRE) == 0);
+
+    HAL_WRITE_UINT8(base+_REG_SCTDR, c);
+
+    // Clear empty flag.
+    HAL_WRITE_UINT8(base+_REG_SCSSR, sr & ~CYGARC_REG_SCSSR_TDRE);
+
+    // Hang around until the character has been safely sent.
+    do {
+        HAL_READ_UINT8(base+_REG_SCSSR, sr);
+    } while ((sr & CYGARC_REG_SCSSR_TDRE) == 0);
+
+    CYGARC_HAL_RESTORE_GP();
+}
+
+#if defined(CYGSEM_HAL_VIRTUAL_VECTOR_DIAG) \
+    || defined(CYGPRI_HAL_IMPLEMENTS_IF_SERVICES)
+
+static channel_data_t channels[CYGNUM_HAL_SH_SH3_SCI_PORTS];
+
+static void
+cyg_hal_plf_sci_write(void* __ch_data, const cyg_uint8* __buf, 
+                         cyg_uint32 __len)
+{
+    CYGARC_HAL_SAVE_GP();
+
+    while(__len-- > 0)
+        cyg_hal_plf_sci_putc(__ch_data, *__buf++);
+
+    CYGARC_HAL_RESTORE_GP();
+}
+
+static void
+cyg_hal_plf_sci_read(void* __ch_data, cyg_uint8* __buf, cyg_uint32 __len)
+{
+    CYGARC_HAL_SAVE_GP();
+
+    while(__len-- > 0)
+        *__buf++ = cyg_hal_plf_sci_getc(__ch_data);
+
+    CYGARC_HAL_RESTORE_GP();
+}
+
+cyg_bool
+cyg_hal_plf_sci_getc_timeout(void* __ch_data, cyg_uint8* ch)
+{
+    channel_data_t* chan = (channel_data_t*)__ch_data;
+    int delay_count;
+    cyg_bool res;
+    CYGARC_HAL_SAVE_GP();
+
+    delay_count = chan->msec_timeout * 10; // delay in .1 ms steps
+
+    for(;;) {
+        res = cyg_hal_plf_sci_getc_nonblock(__ch_data, ch);
+        if (res || 0 == delay_count--)
+            break;
+        
+        CYGACC_CALL_IF_DELAY_US()(100);
+    }
+
+    CYGARC_HAL_RESTORE_GP();
+    return res;
+}
+
+static int
+cyg_hal_plf_sci_control(void *__ch_data, __comm_control_cmd_t __func, ...)
+{
+    static int irq_state = 0;
+    channel_data_t* chan = (channel_data_t*)__ch_data;
+    cyg_uint8 scr;
+    int ret = 0;
+    CYGARC_HAL_SAVE_GP();
+
+    switch (__func) {
+    case __COMMCTL_IRQ_ENABLE:
+        irq_state = 1;
+        HAL_INTERRUPT_UNMASK(chan->isr_vector);
+        HAL_READ_UINT8(chan->base+_REG_SCSCR, scr);
+        scr |= CYGARC_REG_SCSCR_RIE;
+        HAL_WRITE_UINT8(chan->base+_REG_SCSCR, scr);
+        break;
+    case __COMMCTL_IRQ_DISABLE:
+        ret = irq_state;
+        irq_state = 0;
+        HAL_INTERRUPT_UNMASK(chan->isr_vector);
+        HAL_READ_UINT8(chan->base+_REG_SCSCR, scr);
+        scr &= ~CYGARC_REG_SCSCR_RIE;
+        HAL_WRITE_UINT8(chan->base+_REG_SCSCR, scr);
+        break;
+    case __COMMCTL_DBG_ISR_VECTOR:
+        ret = chan->isr_vector;
+        break;
+    case __COMMCTL_SET_TIMEOUT:
+    {
+        va_list ap;
+
+        va_start(ap, __func);
+
+        ret = chan->msec_timeout;
+        chan->msec_timeout = va_arg(ap, cyg_uint32);
+
+        va_end(ap);
+    }        
+    default:
+        break;
+    }
+    CYGARC_HAL_RESTORE_GP();
+    return ret;
+}
+
+static int
+cyg_hal_plf_sci_isr(void *__ch_data, int* __ctrlc, 
+                    CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
+{
+    cyg_uint8 c, sr;
+    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
+    int res = 0;
+    CYGARC_HAL_SAVE_GP();
+
+    *__ctrlc = 0;
+    HAL_READ_UINT8(base+_REG_SCSSR, sr);
+    if (sr & CYGARC_REG_SCSSR_RDRF) {
+        HAL_READ_UINT8(base+_REG_SCRDR, c);
+
+        // Clear buffer full flag.
+        HAL_WRITE_UINT8(base+_REG_SCSSR, 
+                        CYGARC_REG_SCSSR_CLEARMASK & ~CYGARC_REG_SCSSR_RDRF);
+
+        if( cyg_hal_is_break( &c , 1 ) )
+            *__ctrlc = 1;
+
+        res = CYG_ISR_HANDLED;
+    }
+
+    CYGARC_HAL_RESTORE_GP();
+    return res;
+}
+
+void
+cyg_hal_plf_sci_init(int sci_index, int comm_index, 
+                     int rcv_vect, cyg_uint8* base)
+{
+    channel_data_t* chan = &channels[sci_index];
+    hal_virtual_comm_table_t* comm;
+    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM()(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+
+    // Initialize channel table
+    chan->base = base;
+    chan->isr_vector = rcv_vect;
+    chan->msec_timeout = 1000;
+
+    // Disable interrupts.
+    HAL_INTERRUPT_MASK(chan->isr_vector);
+
+    // Init channel
+    
+    cyg_hal_plf_sci_init_channel(chan);
+
+    // Setup procs in the vector table
+
+    // Initialize channel procs
+    CYGACC_CALL_IF_SET_CONSOLE_COMM()(comm_index);
+    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
+    CYGACC_COMM_IF_CH_DATA_SET(*comm, chan);
+    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_sci_write);
+    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_sci_read);
+    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_sci_putc);
+    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_sci_getc);
+    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_sci_control);
+    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_sci_isr);
+    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_sci_getc_timeout);
+
+    // Restore original console
+    CYGACC_CALL_IF_SET_CONSOLE_COMM()(cur);
+}
+
+#endif // CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGPRI_HAL_IMPLEMENTS_IF_SERVICES
+
+#endif // CYGNUM_HAL_SH_SH3_SCI_PORTS
+
+//-----------------------------------------------------------------------------
+// end of sh_sci.c