new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/sh/edk7708/current/src/sh_sci_7708.inl
@@ -0,0 +1,97 @@
+//==========================================================================
+//
+//      io/serial/sh/sh_sci_7708.c
+//
+//      Serial I/O Interface Module definitions for SH3/7708
+//
+//==========================================================================
+//####COPYRIGHTBEGIN####
+//                                                                          
+// -------------------------------------------                              
+// The contents of this file are subject to the Red Hat eCos Public License 
+// Version 1.1 (the "License"); you may not use this file except in         
+// compliance with the License.  You may obtain a copy of the License at    
+// http://www.redhat.com/                                                   
+//                                                                          
+// Software distributed under the License is distributed on an "AS IS"      
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
+// License for the specific language governing rights and limitations under 
+// the License.                                                             
+//                                                                          
+// The Original Code is eCos - Embedded Configurable Operating System,      
+// released September 30, 1998.                                             
+//                                                                          
+// The Initial Developer of the Original Code is Red Hat.                   
+// Portions created by Red Hat are                                          
+// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
+// All Rights Reserved.                                                     
+// -------------------------------------------                              
+//                                                                          
+//####COPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):   jskov
+// Contributors:jskov
+// Date:        1999-06-16
+// Purpose:     Defines SCI serial resources for SH3/7708.
+// Description: 
+//
+//####DESCRIPTIONEND####
+//==========================================================================
+
+// Controller bases in the SH3/7708 (only one)
+#define SH_SERIAL_SCI_BASE       0xfffffe80
+
+// The SCI controller register layout on the SH3/7708.
+#define SCI_SCSMR                0      // serial mode register
+#define SCI_SCBRR                2      // bit rate register
+#define SCI_SCSCR                4      // serial control register
+#define SCI_SCTDR                6      // transmit data register
+#define SCI_SCSSR                8      // serial status register
+#define SCI_SCRDR                10     // receive data register
+#define SCI_SCSPTR               -4     // serial port register
+
+static sh_sci_info sh_serial_info = {CYGARC_REG_SCSPTR,
+                                     CYGNUM_HAL_INTERRUPT_SCI_ERI,
+                                     CYGNUM_HAL_INTERRUPT_SCI_RXI,
+                                     CYGNUM_HAL_INTERRUPT_SCI_TXI,
+                                     SH_SERIAL_SCI_BASE};
+
+#if CYGNUM_IO_SERIAL_SH_EDK7708_SCI_BUFSIZE > 0
+static unsigned char sh_serial_out_buf[CYGNUM_IO_SERIAL_SH_EDK7708_SCI_BUFSIZE];
+static unsigned char sh_serial_in_buf[CYGNUM_IO_SERIAL_SH_EDK7708_SCI_BUFSIZE];
+
+static SERIAL_CHANNEL_USING_INTERRUPTS(sh_serial_channel,
+                                       sh_serial_funs, 
+                                       sh_serial_info,
+                                       CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_EDK7708_SCI_BAUD),
+                                       CYG_SERIAL_STOP_DEFAULT,
+                                       CYG_SERIAL_PARITY_DEFAULT,
+                                       CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                                       CYG_SERIAL_FLAGS_DEFAULT,
+                                       &sh_serial_out_buf[0], 
+                                       sizeof(sh_serial_out_buf),
+                                       &sh_serial_in_buf[0],  
+                                       sizeof(sh_serial_in_buf)
+    );
+#else
+static SERIAL_CHANNEL(sh_serial_channel,
+                      sh_serial_funs, 
+                      sh_serial_info,
+                      CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_EDK7708_SCI_BAUD),
+                      CYG_SERIAL_STOP_DEFAULT,
+                      CYG_SERIAL_PARITY_DEFAULT,
+                      CYG_SERIAL_WORD_LENGTH_DEFAULT,
+                      CYG_SERIAL_FLAGS_DEFAULT
+    );
+#endif
+
+DEVTAB_ENTRY(sh_serial_io,
+             CYGDAT_IO_SERIAL_SH_EDK7708_SCI_NAME,
+             0,                 // Does not depend on a lower level interface
+             &cyg_io_serial_devio, 
+             sh_serial_init, 
+             sh_serial_lookup,          // Serial driver may need initializing
+             &sh_serial_channel
+    );