#=============================================================================
#
#    ecos.db
#
#    This file is a temporary database for eCos package information.
#    It replaces the old packages and targets files, and will in turn
#    be subsumed by another file containing more inormation.
#
#=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
## Copyright (C) 2004 eCosCentric Limited
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
#=============================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):	bartv
# Date:		1999-06-13
#
# This file contains three lots of information. It details the packages
# in the component repository, the target boards supported by those
# packages, and a set of templates that can be used to instantiate
# configuration.
# 
#####DESCRIPTIONEND####
#===============================================================================

package CYGPKG_HAL {
        alias		{ "eCos common HAL" hal hal_common }
	directory	hal/common
	script		hal.cdl
	description "
The eCos HAL package provide a porting layer for higher-level parts of
the system such as the kernel and the C library. Each installation
should have HAL packages for one or more architectures, and for each
architecture there may be one or more supported platforms. It is
necessary to select one target architecture and one platform for that
architecture. There are also a number of configuration options that
are common to all HAL packages."
}

package CYGPKG_INFRA {
	alias 		{ Infrastructure infra }
	directory	infra
	script		infra.cdl
        description "
Common types and useful macros.
Tracing and assertion facilities.
Package startup options." 
}

package CYGPKG_IO {
	alias 		{ "I/O sub-system" io }
	directory	io/common
	script		io.cdl
        description "
           The eCos system is supplied with a number of different
           device drivers.  This package contains the basic I/O system
           support which is the basis for all drivers."
}

package CYGPKG_IO_SERIAL {
	alias 		{ "Serial device drivers" serial io_serial }
	directory	io/serial
	script		io_serial.cdl
        description "
           This package contains drivers for basic I/O services on
           serial devices."
}

package CYGPKG_IO_PCMCIA {
	alias 		{ "PCMCIA & Compact Flash support" pcmcia io_pcmcia cf }
	directory	io/pcmcia
	script		io_pcmcia.cdl
        description "
           This package contains basic card services support for PCMCIA
           and Compact Flash devices."
}

package CYGPKG_DEVS_PCMCIA_ASSABET {
	alias 		{ "SA11x0/Assabet PCMCIA & Compact Flash support" pcmcia_assabet assabet_pcmcia assabet_cf io_assabet_pcmcia}
	directory	devs/pcmcia/arm/assabet
	script		pcmcia_assabet.cdl
	hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Assabet board."
}

package CYGPKG_DEVS_PCMCIA_CERF {
	alias 		{ "SA11x0/Cerf PCMCIA & Compact Flash support" pcmcia_cerf cerf_pcmcia cerf_cf io_cerf_pcmcia}
	directory	devs/pcmcia/arm/cerf
	script		pcmcia_cerf.cdl
	hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Cerf board."
}

package CYGPKG_DEVS_PCMCIA_CERFPDA {
	alias 		{ "SA11x0/Cerfpda PCMCIA & Compact Flash support" pcmcia_cerfpda cerfpda_pcmcia cerfpda_cf io_cerfpda_pcmcia}
	directory	devs/pcmcia/arm/cerfpda
	script		pcmcia_cerfpda.cdl
	hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Cerfpda."
}

package CYGPKG_DEVS_PCMCIA_IPAQ {
        alias           { "SA11x0/iPAQ PCMCIA & Compact Flash support" pcmcia_ipaq ipaq_pcmcia ipaq_cf io_ipaq_pcmcia}
        directory       devs/pcmcia/arm/ipaq
        script          pcmcia_ipaq.cdl
        hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the Compaq iPAQ pocket PC."
}

package CYGPKG_IO_FLASH {
	alias 		{ "Generic FLASH memory support" flash }
	directory	io/flash
	script		io_flash.cdl
        description "
           This package contains generic support for FLASH memory."
}

package CYGPKG_DEVS_FLASH_INTEL_BOOTBLOCK {
	alias 		{ "Support for Intel boot block flash memory" flash_intel_bootblock }
	directory	devs/flash/intel/bootblock
	script		flash_intel_bootblock.cdl
	hardware
        description "
           This package contains hardware support for Intel boot block flash memory."
}


package CYGPKG_DEVS_FLASH_ARM_AAED2000 {
	alias 		{ "Support for flash memory on Agilent AAED2000 board" flash_aaed2000 }
	directory	devs/flash/arm/aaed2000
	script		flash_arm_aaed2000.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the Agilent AAED2000 platform."
}

package CYGPKG_DEVS_FLASH_AMD_AM29XXXXX {
	alias 		{ "Support for AMD AM29xxxxx flash memory" flash_amd_am29xxxxx }
	directory	devs/flash/amd/am29xxxxx
	script		flash_amd_am29xxxxx.cdl
	hardware
        description "
           This package contains hardware support for AMD AM29xxxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX {
	alias 		{ "Support for Atmel AT29Cxxxx flash memory" flash_atmel_at29cxxxx }
	directory	devs/flash/atmel/at29cxxxx
	script		flash_atmel_at29cxxxx.cdl
	hardware
        description "
           This package contains hardware support for Atmel AT29Cxxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX {
	alias 		{ "Support for Atmel AT49xxxx flash memory" flash_atmel_at49xxxx }
	directory	devs/flash/atmel/at49xxxx
	script		flash_atmel_at49xxxx.cdl
	hardware
        description "
           This package contains hardware support for Atmel AT49xxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ARM_PID {
	alias 		{ "Support for flash memory on ARM/PID board" flash_arm_pid }
	directory	devs/flash/arm/pid
	script		flash_arm_pid.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the ARM PID platform."
}

package CYGPKG_DEVS_FLASH_ARM_E7T {
    alias       { "FLASH memory support for the ARM Evaluator-7T" flash_e7t }
    directory   devs/flash/arm/e7t
    script      flash_e7t.cdl
    hardware
        description "
           This package contains hardware support for FLASH memory
       on the ARM Evaluator-7T platform."
}

package CYGPKG_DEVS_FLASH_SH_EDK7708 {
	alias 		{ "Support for flash memory on Hitachi/EDK7708 board" flash_sh_edk7708 }
	directory	devs/flash/sh/edk7708
	script		flash_sh_edk7708.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the Hitachi EDK7708 platform."
}

package CYGPKG_DEVS_FLASH_CQ7750 {
	alias 		{ "Support for flash memory on CqREEK SH7750 board" flash_cq7750 }
	directory	devs/flash/sh/cq7750
	script		flash_cq7750.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the CqREEK SH7750 platform."
}

package CYGPKG_DEVS_FLASH_MIPS_OCELOT {
	alias 		{ "Support for flash memory on PMC-Sierra/Ocelot board" flash_qed_ocelot }
	directory	devs/flash/mips/ocelot
	script		flash_mips_ocelot.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the PMC-Sierra Ocelot platform."
}

package CYGPKG_DEVS_FLASH_MIPS_VRC437X {
	alias 		{ "Support for flash memory on VRC437X boards" flash_vrc437x }
	directory	devs/flash/mips/vrc437x
	script		flash_mips_vrc437x.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the VRC437X platform."
}

package CYGPKG_DEVS_FLASH_MIPS_REFIDT334 {
	alias 		{ "MIPS IDT 79RC32334 reference platform flash support" flash_refidt334 }
	directory	devs/flash/mips/idt79s334a
	script		flash_mips_refidt334.cdl
	hardware
        description "
           This package contains hardware support for flash memory
	   on the IDT MIPS 334a reference platform."
}

package CYGPKG_DEVS_FLASH_SH_HS7729PCI {
        alias           { "Hitachi SH/HS7729PCI FLASH memory support" flash_hs7729pci }
        directory       devs/flash/sh/hs7729pci
        script          flash_sh_hs7729pci.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/HS7729PCI platform."
}

package CYGPKG_DEVS_FLASH_SH_SE77X9 {
        alias           { "Hitachi SH/SE77X9 FLASH memory support" flash_se77x9 }
        directory       devs/flash/sh/se77x9
        script          flash_sh_se77x9.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/SE77X9 platform."
}

package CYGPKG_DEVS_FLASH_SH_SE7751 {
        alias           { "Hitachi SH/SE7751 FLASH memory support" flash_se7751 }
        directory       devs/flash/sh/se7751
        script          flash_sh_se7751.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/SE7751 platform."
}

package CYGPKG_DEVS_FLASH_SH_MICRODEV {
        alias           { "SuperH SH4-202 MicroDev CPU board FLASH memory support" flash_microdev }
        directory       devs/flash/sh/microdev
        script          flash_microdev.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the SuperH SH4-202 MicroDev CPU board platform."
}

package CYGPKG_DEVS_FLASH_EBSA285 {
	alias 		{ "FLASH memory support for StrongARM EBSA-285" flash_ebsa285 }
	directory	devs/flash/arm/ebsa285
	script		flash_ebsa285.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the StrongARM EBSA-285 platform."
}

package CYGPKG_DEVS_FLASH_SA1100MM {
	alias 		{ "FLASH memory support for StrongARM SA1100 Multimedia" flash_sa1100mm }
	directory	devs/flash/arm/sa1100mm
	script		flash_sa1100mm.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the StrongARM SA1100 Multimedia platform."
}

package CYGPKG_DEVS_FLASH_EDB7XXX {
	alias 		{ "FLASH support for Cirrus Logic EP7xxx based boards" flash_edb7xxx }
	directory	devs/flash/arm/edb7xxx
	script		flash_edb7xxx.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Cirrus Logic EP7xxx based platform(s)."
}

package CYGPKG_DEVS_FLASH_AT91 {
	alias 		{ "FLASH memory support for Atmel AT91/EB40 (obsolete)" flash_at91 }
	directory	devs/flash/arm/at91
	script		flash_at91.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Atmel AT91/EB40 platform(s). This driver is obsolete,
           use CYGPKG_DEVS_FLASH_EB40 instead!"
}

package CYGPKG_DEVS_FLASH_EB40 {
	alias 		{ "FLASH memory support for Atmel AT91/EB40" flash_eb40 }
	directory	devs/flash/arm/eb40
	script		flash_eb40.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Atmel AT91/EB40 platform(s)."
}

package CYGPKG_DEVS_FLASH_EB40A {
	alias 		{ "FLASH memory support for Atmel AT91/EB40A" flash_eb40a }
	directory	devs/flash/arm/eb40a
	script		flash_eb40a.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Atmel AT91/EB40A platform(s)."
}

package CYGPKG_DEVS_FLASH_EB42 {
	alias 		{ "FLASH memory support for Atmel AT91/EB42" flash_eb42 }
	directory	devs/flash/arm/eb42
	script		flash_eb42.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Atmel AT91/EB42 platform(s)."
}

package CYGPKG_DEVS_FLASH_EB55 {
	alias 		{ "FLASH memory support for Atmel AT91/EB55" flash_eb55 }
	directory	devs/flash/arm/eb55
	script		flash_eb55.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Atmel AT91/EB55 platform(s)."
}

package CYGPKG_DEVS_FLASH_ASSABET {
	alias 		{ "FLASH memory support for Intel SA1110 (Assabet)" flash_assabet }
	directory	devs/flash/arm/assabet
	script		flash_assabet.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Intel StrongARM SA-1110 Assabet platform."
}

package CYGPKG_DEVS_FLASH_CERF {
	alias 		{ "FLASH memory support for Intrinsyc SA1110 (Cerf)" flash_cerf }
	directory	devs/flash/arm/cerf
	script		flash_cerf.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Intrinsyc SA1110 Cerf board."
}

package CYGPKG_DEVS_FLASH_CERFPDA {
	alias 		{ "FLASH memory support for Intrinsyc SA1110 (Cerfpda)" flash_cerfpda }
	directory	devs/flash/arm/cerfpda
	script		flash_cerfpda.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Intrinsyc SA1110 Cerfpda."
}

package CYGPKG_DEVS_FLASH_IPAQ {
	alias 		{ "FLASH memory support for Intel SA1110 (Ipaq)" flash_ipaq }
	directory	devs/flash/arm/ipaq
	script		flash_ipaq.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Intel StrongARM SA-1110 iPAQ platform."
}

package CYGPKG_DEVS_FLASH_FLEXANET {
      alias           { "FLASH memory support for Flexanet" flash_flexanet }
      directory       devs/flash/arm/flexanet
      script          flash_flexanet.cdl
      hardware
        description "
           This package contains hardware support for FLASH memory
           on the SA-1100 Flexanet platform."
}

package CYGPKG_DEVS_FLASH_MPC50 {
	alias 		{ "FLASH memory support for MPC 5.0" flash_mpc50 }
	directory	devs/flash/arm/mpc50
	script		flash_mpc50.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the MPC 5.0."
}

package CYGPKG_DEVS_FLASH_MALTA {
	alias 		{ "FLASH memory support for MIPS Malta board" flash_malta }
	directory	devs/flash/mips/malta
	script		flash_malta.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the MIPS Malta platform."
}

package CYGPKG_DEVS_FLASH_ARM_EXCALIBUR {
	alias 		{ "FLASH memory support for Altera ARM9/Excalibur board" flash_malta }
	directory	devs/flash/arm/excalibur
	script		flash_excalibur.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Altera Excalibur platform."
}

package CYGPKG_DEVS_FLASH_ARM_SMDK2410 {
        alias           { "FLASH memory support for Samsung ARM9/SMDK2410 board" flash_smdk2410 }
        directory       devs/flash/arm/smdk2410
        script          flash_smdk2410.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Samsung smdk2410 platform."
}

package CYGPKG_DEVS_FLASH_ARM_INNOVATOR {
	alias 		{ "FLASH memory support for the Innovator" flash_innovator }
	directory	devs/flash/arm/innovator
	script		flash_innovator.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Innovator platform."
}

package CYGPKG_DEVS_FLASH_ARM_AIM711 {
        alias           { "Support for flash memory on AIM 711 board" flash_arm_snds }
        directory       devs/flash/arm/aim711
        script          flash_arm_aim711.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the ARM Industrial Module AIM 711 platform."
}

package CYGPKG_DEVS_FLASH_NANO {
	alias 		{ "FLASH memory support for Intel SA1110 nanoEngine" flash_nano }
	directory	devs/flash/arm/nano
	script		flash_nano.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the StrongARM SA-1110 nanoEngine platform."
}

package CYGPKG_DEVS_FLASH_STRATA {
	alias 		{ "Generic FLASH memory support for Intel StrataFLASH" strata }
	directory	devs/flash/intel/strata
	script		flash_strata.cdl
	hardware
        description "
           This package contains generic hardware support for Intel
	   StrataFLASH memory devices."
}

package CYGPKG_DEVS_FLASH_SST_39VFXXX {
    alias       { "Support for SST 39VFXXX flash memory" flash_sst_39vfXXX }
    directory   devs/flash/sst/39vfxxx
    script      flash_sst_39vfxxx.cdl
    hardware
        description "
           This package contains hardware support for SST 39VFxxx
           flash memory devices. Until now it supports SST 39VF080,
           39VF016 and 39VF400 devices."
}

package CYGPKG_DEVS_FLASH_INTEL_28FXXX {
	alias 		{ "Generic FLASH memory support for Intel 28Fxxx Flash parts" flashfile }
	directory	devs/flash/intel/28fxxx
	script		flash_intel_28fxxx.cdl
	hardware
        description "
           This package contains generic hardware support for Intel
	   Flash memory devices."
}

package CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310 {
	alias 		{ "FLASH memory support for Cyclone IQ80310" flash_iq80310 }
	directory	devs/flash/arm/iq80310
	script		flash_iq80310.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Cyclone IQ80310 platform."
}

package CYGPKG_DEVS_FLASH_IQ80321 {
	alias 		{ "FLASH memory support for IQ80321" flash_iq80321 }
	directory	devs/flash/arm/iq80321
	script		flash_iq80321.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the IQ80321 platform."
}

package CYGPKG_DEVS_FLASH_IXDP425 {
	alias 		{ "FLASH memory support for IXDP425" flash_ixdp425 }
	directory	devs/flash/arm/ixdp425
	script		flash_ixdp425.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the IXDP425 platform."
}

package CYGPKG_DEVS_FLASH_GRG {
	alias 		{ "FLASH memory support for GRG" flash_grg }
	directory	devs/flash/arm/grg
	script		flash_grg.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Intel Generic Residential Gateway platform."
}

package CYGPKG_DEVS_FLASH_PRPMC1100 {
	alias 		{ "FLASH memory support for PrPMC1100" flash_prpmc1100 }
	directory	devs/flash/arm/prpmc1100
	script		flash_prpmc1100.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Motorola PrPMC1100 platform."
}

package CYGPKG_DEVS_FLASH_ARM_INTEGRATOR {
        alias           { "FLASH memory support for ARM INTEGRATOR" flash_integrator }
        directory       devs/flash/arm/integrator
        script          flash_integrator.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the ARM INTEGRATOR platform."
}

package CYGPKG_DEVS_FLASH_MBX {
	alias 		{ "FLASH memory support for Motorola PowerPC/860 MBX" flash_mbx }
	directory	devs/flash/powerpc/mbx
	script		flash_mbx.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Motorola PowerPC/860 MBX platform."
}

package CYGPKG_DEVS_FLASH_TS6 {
	alias 		{ "FLASH memory support for Delphi Communication Systems, Inc. TigerSHARC6 Board" flash_ts6 }
	directory	devs/flash/powerpc/ts6
	script		flash_ts6.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Delphi Communication Systems TigerSHARC6 platform."
}

package CYGPKG_DEVS_FLASH_VADS {
	alias 		{ "FLASH memory support for Motorola MPC8260 Voyager ADS board" flash_vads }
	directory	devs/flash/powerpc/vads
	script		flash_vads.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Motorola MPC8260 Voyager ADS platform."
}

package CYGPKG_DEVS_FLASH_CME555 {
	alias 		{ "FLASH memory support for Axiom's CME555" flash_cme555 }
	directory	devs/flash/powerpc/cme555
	script		flash_cme555.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on Axiom's CME555 board."
}

package CYGPKG_DEVS_FLASH_EC555 {
	alias 		{ "FLASH memory support for ec555 board" flash_ec555 }
	directory	devs/flash/powerpc/ec555
	script		flash_ec555.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the ec555 board."
}

package CYGPKG_DEVS_FLASH_VIPER {
	alias 		{ "FLASH memory support for A&M Viper PowerPC/8xx" flash_viper }
	directory	devs/flash/powerpc/viper
	script		flash_viper.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the A&M PowerPC/8xx VIPER platform."
}

package CYGPKG_DEVS_FLASH_MN10300_STB {
	alias 		{ "FLASH memory support for Matsushita MN10300 STB" flash_stb }
	directory	devs/flash/mn10300/stb
	script		flash_stb.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Matsushita MN10300 STB platform (SRAM2 socket)."
}

package CYGPKG_DEVS_FLASH_MN10300_ASB2303 {
	alias 		{ "FLASH memory support for Matsushita ASB2303" flash_asb2303 }
	directory	devs/flash/mn10300/asb2303
	script		flash_asb2303.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Matsushita MN10300 ASB2303 platform (system flash socket)."
}

package CYGPKG_DEVS_FLASH_MN10300_ASB2305 {
	alias 		{ "FLASH memory support for Matsushita ASB2305" flash_asb2305 }
	directory	devs/flash/mn10300/asb2305
	script		flash_asb2305.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Matsushita MN10300 ASB2305 platform (system flash socket)."
}

package CYGPKG_DEVS_FLASH_ATLAS {
	alias 		{ "FLASH memory support for MIPS Atlas" flash_atlas }
	directory	devs/flash/mips/atlas
	script		flash_atlas.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the MIPS Atlas platform."
}
package CYGPKG_DEVS_FLASH_SYNTH {
    alias               { "Synthetic FLASH memory support" synth_flash flash_synth }
    directory           devs/flash/synth
    script              flash_synth.cdl
    hardware
    description   "
        FLASH memory device support for Synthetic target"
}

package CYGPKG_DEVS_FLASH_TOSHIBA_TC58XXX {
	alias 		{ "Support for Toshiba TC58xxx flash memory" flash_toshiba_tc58xxx }
	directory	devs/flash/toshiba/tc58xxx
	script		flash_toshiba_tc58xxx.cdl
	hardware
        description "
           This package contains hardware support for Toshiba TC58xxx
           NAND flash memory devices."
}

package CYGPKG_DEVS_FLASH_FRV_FRV400 {
        alias           { "Fujitsu FRV400 FLASH memory support" flash_frv400 }
        directory       devs/flash/frv/frv400
        script          flash_frv_frv400.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Fujitsu FRV400 platform."
}

package CYGPKG_DEVS_TOUCH_IPAQ {
	alias 		{ "Touch screen support for iPAQ" touch_ipaq }
	directory	devs/touch/arm/ipaq
	script		touch_ipaq.cdl
	hardware
        description "
           This package contains hardware support for the touch screen
	   on the Compaq iPAQ Pocket PC."
}

package CYGPKG_DEVS_KBD_IPAQ {
	alias 		{ "Keypad/button support for iPAQ" kbd_ipaq }
	directory	devs/kbd/arm/ipaq
	script		kbd_ipaq.cdl
	hardware
        description "
           This package contains hardware support for the keyboard buttons
	   on the Compaq iPAQ Pocket PC."
}

package CYGPKG_DEVS_TOUCH_AAED2000 {
	alias 		{ "Touch screen support for Agilent AAED2000" touch_aaed2000 }
	directory	devs/touch/arm/aaed2000
	script		touch_aaed2000.cdl
	hardware
        description "
           This package contains hardware support for the touch screen
	   on the Agilent AAED2000 prototype."
}

package CYGPKG_DEVS_KBD_AAED2000 {
	alias 		{ "Keyboard support for Agilent AAED2000" kbd_aaed2000 }
	directory	devs/kbd/arm/aaed2000
	script		kbd_aaed2000.cdl
	hardware
        description "
           This package contains hardware support for the keyboard
	   on the Agilent AAED2000 prototype."
}

package CYGPKG_IO_SERIAL_ARM_EBSA285 {
    alias 	      { "Intel EBSA285 serial driver"
                        devs_serial_arm_ebsa285 ebsa285_serial_driver }
    hardware
    directory	      devs/serial/arm/ebsa285
    script	      ser_arm_ebsa285.cdl	
    description       "Intel StrongARM/EBSA285 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310 {
    alias 	      { "Intel XScale IOP310 serial driver"
                        devs_serial_arm_iop310 iop310_serial_driver }
    hardware
    directory	      devs/serial/arm/iop310
    script	      ser_arm_iop310.cdl	
    description       "Intel XScale IOP310 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_IQ80321 {
    alias 	      { "Intel XScale IQ80321 serial driver"
                        devs_serial_arm_iq80321 iq80321_serial_driver }
    hardware
    directory	      devs/serial/arm/iq80321
    script	      ser_arm_iq80321.cdl	
    description       "Intel XScale/IQ80321 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_SA11X0 {
    alias 	      { "Intel StrongARM SA11x0 serial driver"
                        devs_serial_arm_sa11x0 sa11x0_serial_driver }
    hardware
    directory	      devs/serial/arm/sa11x0
    script	      ser_arm_sa11x0.cdl	
    description       "Intel StrongARM/SA11x0 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_PID {
    alias             { "ARM PID serial device drivers"
                        devs_serial_arm_pid pid_serial_driver }
    hardware
    directory	      devs/serial/arm/pid
    script	      ser_arm_pid.cdl	
    description       "ARM PID serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_CERFPDA {
    alias             { "Cerfpda 16x5x serial device drivers"
                        devs_serial_arm_cerfpda cerfpda_serial_driver }
    hardware
    directory	      devs/serial/arm/cerfpda
    script	      ser_arm_cerfpda.cdl	
    description       "Cerfpda serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AEB {
    alias             { "ARM AEB-1 serial device drivers"
                        devs_serial_arm_aeb aeb_serial_driver }
    hardware
    directory	      devs/serial/arm/aeb
    script	      ser_arm_aeb.cdl	
    description       "ARM AEB-1 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AAED2000 {
    alias             { "Agilent AAED2000 serial device drivers"
                        devs_serial_arm_aaed2000 aaed2000_serial_driver }
    hardware
    directory	      devs/serial/arm/aaed2000
    script	      ser_arm_aaed2000.cdl
    description       "Agilent AAED2000 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_SMDK2410 {
    alias             { "Samsung ARM9/SMDK2410 board serial device drivers"
                        devs_serial_arm_smdk2410 smdk2410_serial_driver }
    hardware
    directory         devs/serial/arm/smdk2410
    script            ser_arm_smdk2410.cdl        
    description       "Samsung ARM9/SMDK2410 board serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_EDB7XXX {
    alias             { "Cirrus Logic ARM based board serial device drivers"
                        devs_serial_arm_edb7xxx edb7xxx_serial_driver }
    hardware
    directory	      devs/serial/arm/edb7xxx
    script	      ser_arm_edb7xxx.cdl	
    description       "Cirrus Logic ARM based development board serial
                       device drivers"
}

package CYGPKG_IO_SERIAL_ARM_CMA230 {
    alias             { "Cogent ARM/CMA230 serial device drivers"
                        devs_serial_arm_cma230 cma230_serial_driver }
    hardware
    directory	      devs/serial/arm/cma230
    script	      ser_arm_cma230.cdl	
    description       "Cogent ARM/CMA230 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_E7T {
    alias             { "ARM AEB-2 (E7T) serial device drivers"
                        devs_serial_arm_e7t e7t_serial_driver }
    hardware
    directory         devs/serial/arm/e7t
    script            ser_arm_e7t.cdl   
    description       "ARM AEB-2 (E7T) serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_S3C4510 {
    alias             { "Generig ARM S3C4510 serial device driver"
                        devs_serial_arm_s3c4510 s3c4510_serial_driver }
    hardware
    directory         devs/serial/arm/s3c4510
    script            ser_arm_s3c4510.cdl
    description       "Generic serial device driver for the internal
                       serial interface of the S3C4510"
}

package CYGPKG_IO_SERIAL_ARM_AIM711 {
    alias             { "AIM 711 serial device drivers"
                        devs_serial_arm_aim711 aim711_serial_driver }
    hardware
    directory         devs/serial/arm/aim711
    script            ser_arm_aim711.cdl
    description       "ARM Industral Module AIM 711 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AIM711_S3C4510 {
    alias             { "AIM 711 S3C4510 serial device driver"
                        devs_serial_arm_aim711_s3c4510 aim711_s3c4510_serial_driver }
    hardware
    directory         devs/serial/arm/aim711
    script            ser_arm_aim711_s3c4510.cdl
    description       "ARM Industral Module AIM 711 serial device driver
                       for the internal serial interface of the S3C4510"
}

package CYGPKG_IO_SERIAL_ARM_AIM711_16X5X {
    alias             { "ARM AIM711 16x5x serial device driver"
                        devs_serial_arm_aim711_16x5x aim711_16x5x_serial_driver }
    hardware
    directory         devs/serial/arm/aim711
    script            ser_arm_aim711_16x5x.cdl
    description       "ARM Industral Module AIM 711 serial device driver
                       for the external 16550 device using the generic 
                       16x5x driver"
}

package CYGPKG_IO_SERIAL_ARM_INTEGRATOR {
    alias             { "ARM INTEGRATOR serial device drivers"
                        devs_serial_arm_integrator integrator_serial_driver }
    hardware
    directory         devs/serial/arm/integrator
    script            ser_arm_integrator.cdl    
    description       "ARM INTEGRATOR serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AT91 {
    alias 	      { "Atmel AT91 serial device driver"
                        devs_serial_arm_at91 at91_serial_driver }
    hardware
    directory	      devs/serial/arm/at91
    script	      ser_arm_at91.cdl	
    description       "Atmel AT91 on-chip serial device driver."
}

package CYGPKG_IO_SERIAL_POWERPC_COGENT {
    alias             { "Cogent PowerPC serial device drivers"
                        devs_serial_powerpc_cogent cogent_serial_driver }
    hardware
    directory	      devs/serial/powerpc/cogent
    script	      ser_powerpc_cogent.cdl	
    description       "Cogent PowerPC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_EC555 {
    alias             { "ec555 PowerPC serial device drivers"
                        devs_serial_powerpc_ec555 ec555_serial_driver }
    hardware
    directory	      devs/serial/powerpc/ec555
    script	      ser_powerpc_ec555.cdl	
    description       "ec555 PowerPC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_CME555 {
    alias             { "cme555 PowerPC serial device drivers"
                        devs_serial_powerpc_cme555 cme555_serial_driver }
    hardware
    directory	      devs/serial/powerpc/cme555
    script	      ser_powerpc_cme555.cdl	
    description       "cme555 PowerPC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC {
    alias             { "PowerPC QUICC/SMC serial device drivers"
                        devs_serial_quicc_smc quicc_smc_serial_driver
                        devs_serial_powerpc_quicc_smc
                        devs_serial_powerpc_quicc quicc_serial_driver }
    hardware
    directory	      devs/serial/powerpc/quicc
    script	      ser_quicc_smc.cdl	
    description       "PowerPC QUICC/SMC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_MPC8XXX {
    alias             { "PowerPC MPC8XXX (QUICC-II) serial device drivers"
                        devs_serial_powerpc_mpc8xxx mpc8xxx_serial_driver }
    hardware
    directory	      devs/serial/powerpc/mpc8xxx
    script	      ser_mpc8xxx.cdl	
    description       "PowerPC MPC8XXX (QUICC-II) serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC {
    alias             { "PowerPC VADS QUICC2/SCC serial device drivers"
                        devs_serial_quicc2_scc quicc2_scc_serial_driver
                        devs_serial_powerpc_quicc2_scc
                        devs_serial_powerpc_quicc2 quicc2_serial_driver }
    hardware
    directory	      devs/serial/powerpc/quicc2
    script	      ser_quicc2_scc.cdl	
    description       "PowerPC VADS QUICC2/SCC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_PPC405 {
    alias             { "PowerPC PPC405GP serial device drivers" devs_serial_ppc405 }
    hardware
    directory	      devs/serial/powerpc/ppc405
    script	      ser_powerpc_ppc405.cdl	
    description       "PowerPC PPC405GP serial device drivers"
}

package CYGPKG_IO_SERIAL_SPARCLITE_SLEB {
    alias             { "SPARClite SLEB serial device drivers"
                        devs_serial_sparclite_sleb sleb_serial_driver }
    hardware
    directory	      devs/serial/sparclite/sleb
    script	      ser_sparclite_sleb.cdl	
    description       "SPARClite SLEB serial device drivers"
}

package CYGPKG_IO_SERIAL_TX39_JMR3904 {
    alias             { "TX39 JMR3904 serial device drivers"
                        devs_serial_tx39_jmr3904 jmr3904_serial_driver
                        devs_serial_mips_jmr3904 tx3904_serial_driver }
    hardware
    directory	      devs/serial/mips/jmr3904
    script	      ser_mips_jmr3904.cdl	
    description       "TX39 JMR3904 serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_ATLAS {
    alias             { "Atlas serial device drivers"
                        devs_serial_atlas atlas_serial_driver
                        devs_serial_mips_atlas mips_atlas_serial_driver }
    hardware
    directory	      devs/serial/mips/atlas
    script	      ser_mips_atlas.cdl	
    description       "Atlas serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_REF4955 {
    alias             { "TX49 REF4955 serial device drivers"
                        devs_serial_mips_ref4955 ref4955_serial_driver }
    hardware
    directory	      devs/serial/mips/ref4955
    script	      ser_mips_ref4955.cdl	
    description       "TX49 REF4955 serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_VRC437X {
    alias             { "VRC437X serial device drivers"
                        devs_serial_mips_vrc437x vrc437x_serial_driver }
    hardware
    directory	      devs/serial/mips/vrc437x
    script	      ser_mips_vrc437x.cdl	
    description       "VRC437X serial device drivers"
}

package CYGPKG_IO_SERIAL_MN10300 {
    alias             { "MN10300 serial device drivers"
                        devs_serial_mn10300_mn10300
                        devs_serial_mn10300 mn10300_serial_driver }
    hardware
    directory	      devs/serial/mn10300/mn10300
    script	      ser_mn10300.cdl	
    description       "MN10300 serial device drivers"
}

package CYGPKG_IO_SERIAL_I386_PC {
    alias             { "PC serial device drivers"
                        devs_serial_i386_pc pc_serial_driver }
    hardware
    directory	      devs/serial/i386/pc
    script	      ser_i386_pc.cdl	
    description       "PC serial device drivers"
}

package CYGPKG_IO_SERIAL_GENERIC_16X5X {
    alias             { "16x5x compatible serial device drivers"
                        devs_serial_generic_16x5x 16x5x_serial_driver }
    hardware
    directory	      devs/serial/generic/16x5x
    script	      ser_generic_16x5x.cdl
    description       "16x5x compatible serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SCI {
    alias             { "SH SCI serial device drivers"
                        devs_serial_sh_sci sci_serial_driver }
    hardware
    directory	      devs/serial/sh/sci
    script	      ser_sh_sci.cdl	
    description       "SH SCI serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SCIF {
    alias             { "SH SCIF serial device drivers"
                        devs_serial_sh_scif scif_serial_driver }
    hardware
    directory	      devs/serial/sh/scif
    script	      ser_sh_scif.cdl	
    description       "SH SCIF serial device drivers"
}

package CYGPKG_DEVS_ETH_PHY {
	alias 		{ "Generic PHY support" eth_phy_support }
	hardware
	directory	devs/eth/phy
	script		phy_eth_drivers.cdl
        description     "PHY (ethernet physical transciever) API."
}

package CYGPKG_DEVS_ETH_ARM_CERF {
	alias 		{ "Crystal LAN ethernet driver for Cerf boards" cerf_eth_driver }
	hardware
	directory	devs/eth/arm/cerf
	script		cerf_eth_drivers.cdl
        description     "Ethernet driver for Crystal LAN on Cerf based
                         development boards."
}

package CYGPKG_DEVS_ETH_ARM_CERFPDA {
	alias 		{ "Crystal LAN ethernet driver for the Cerfpda" cerfpda_eth_driver }
	hardware
	directory	devs/eth/arm/cerfpda
	script		cerfpda_eth_drivers.cdl
        description     "Ethernet driver for Crystal LAN on the Cerfpda."
}

package CYGPKG_IO_SERIAL_SH_EDK7708 {
    alias             { "SH3 EDK7708 serial device drivers"
                        devs_serial_sh3_edk7708
                        devs_serial_sh_edk7708 edk7708_serial_driver }
    hardware
    directory	      devs/serial/sh/edk7708
    script	      ser_sh_edk7708.cdl	
    description       "SH3 EDK7708 serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_CQ7708 {
    alias             { "SH3 cq7708 serial device drivers"
                        devs_serial_sh3_cq7708
                        devs_serial_sh_cq7708 cq7708_serial_driver }
    hardware
    directory	      devs/serial/sh/cq7708
    script	      ser_sh_cq7708.cdl	
    description       "SH3 cq7708 serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SE77X9 {
    alias             { "SH3 SE77X9 serial device driver"
                        devs_serial_sh3_se77x9 se77x9_serial_driver }
    hardware
    directory	      devs/serial/sh/se77x9
    script	      ser_sh_se77x9.cdl	
    description       "SH3 SE77x9 serial device driver"
}

package CYGPKG_IO_SERIAL_SH_SH4_202_MD {
    alias             { "SH4-202 MicroDev serial device driver"
                        devs_serial_sh3_se77x9 se77x9_serial_driver }
    hardware
    directory	      devs/serial/sh/sh4_202_md
    script	      ser_sh4_202_md.cdl	
    description       "This option enables the serial device drivers for the
        SuperH SH4-202 MicroDev board, based on the generic SH SCIF driver."
}

package CYGPKG_IO_SERIAL_V85X_V850 {
    alias             { "NEC V850 serial device drivers"
                        devs_serial_v85x_v850 v850_serial_driver }
    hardware
    directory	      devs/serial/v85x/v850
    script	      ser_v85x_v850.cdl	
    description       "Serial device drivers for systems based on NEC V850
                       SA1 (70F3017) or SB1 (70F3033) processors."
}

package CYGPKG_IO_SERIAL_MIPS_UPD985XX {
    alias 	      { "NEC MIPS uPD985xx serial driver"
                        devs_serial_mips_upd985xx upd985xx_serial_driver }
    hardware
    directory	      devs/serial/mips/upd985xx
    script	      ser_mips_upd985xx.cdl	
    description       "NEC MIPS uPD985xx serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_IDT79S334A {
    alias             { "MIPS IDT 79RC32334 reference platform serial device drivers"
                        devs_serial_idt79s334a idt79s334a_serial_driver
                        devs_serial_mips_idt79s334 mips_idt79s334a_serial_driver }
    hardware
    directory	      devs/serial/mips/idt79s334a
    script	      ser_mipsidt_334a.cdl	
    description       "IDT 334a reference platform serial device drivers"
}

package CYGPKG_IO_SERIAL_H8300_SCI {
    alias             { "H8/300 SCI serial device drivers"
                        devs_serial_h8300h_sci sci_serial_driver }
    hardware
    directory       devs/serial/h8300/h8300h
    script          serial_h8300.cdl  
    description       "H8/300 SCI serial device drivers"
}

package CYGPKG_IO_SERIAL_MCF5272_UART {
    alias             { "MCF5272 Serial UART Drivers"
                         devs_MCF5272_uart_driver }
    hardware
    directory	      devs/serial/mcf52xx/mcf5272
    script	      ser_mcf5272_uart.cdl	
    description       "Serial MCF5272 UART Drivers."
}

package CYGPKG_IO_SERIAL_LOOP {
    alias             { "Loop serial device drivers"
                        devs_serial_loop loop_serial_driver }
    directory	      devs/serial/loop
    script	      ser_loop.cdl	
    description       "Loopback serial device driver."
}

package CYGPKG_IO_FILEIO {
	alias 		{ "File IO" fileio io_file }
	directory	io/fileio
	script		fileio.cdl
        description "
	   This package contains the infrastructure for doing POSIX compliant
	   file IO."
}

package CYGPKG_FS_RAM {
	alias 		{ "RAM Filesystem" ramfs ram_fs fs_ram }
	directory	fs/ram
	script		ramfs.cdl
        description "
	   This package contains a RAM resident filesystem."
}

package CYGPKG_FS_ROM {
	alias 		{ "ROM Filesystem" romfs rom_fs fs_rom }
	directory	fs/rom
	script		romfs.cdl
        description "
	   This package contains a ROM resident filesystem."
}

package CYGPKG_FS_JFFS2 {
	alias 		{ "JFFS2 Filesystem" jffs2 }
	directory	fs/jffs2
	script		jffs2.cdl
        description "
	   This package contains the JFFS2 filesystem."
}

package CYGPKG_LINUX_COMPAT {
        alias           { "Linux compatibility" linux_compat linuxcompat }
        directory       compat/linux
        script          linux.cdl
        description "
eCos supports a basic Linux compatibility Layer providing various
functions, equivalents or stubs expected by Linux kernel code, for
assistance in porting drivers and file system code from Linux.
Note this does not provide Linux compatibility to applications."
}

package CYGPKG_IO_ETH_DRIVERS {
	alias 		{ "Common ethernet support" net_drivers eth_drivers CYGPKG_NET_ETH_DRIVERS }
	directory	io/eth
	script		eth_drivers.cdl
        description     "Platform independent ethernet support."
}

package CYGPKG_IO_USB { 
        alias           { "Generic USB support" usb }
        hardware
        directory       io/usb/common
        script          usb.cdl
        description     "Generic USB support"
}

package CYGPKG_IO_USB_SLAVE {
	alias           { "Generic USB slave-side support" usbs }
        hardware
        directory       io/usb/slave
        script          usbs.cdl
	description     "Generic USB slave-side support"
}

package CYGPKG_IO_USB_SLAVE_ETH {
        alias		{ "USB slave-side ethernet class drivers" usbs_eth }
        directory       io/usb/eth/slave
        script          usbs_eth.cdl
        description     "Support for USB peripherals that provide an ethernet-class function"
}

package CYGPKG_DEVS_USB_SA11X0 {
        alias           { "Device-driver for the SA11X0 on-chip USB support" usb_sa11x0 }
        hardware
        directory       devs/usb/sa11x0
        script          usbs_sa11x0.cdl
        description     "A device driver for the SA11X0 on-chip USB slave port"
}

package CYGPKG_DEVS_USB_UPD985XX {
        alias           { usb_upd985xx }
        hardware
        directory       devs/usb/nec_upd985xx
        script          usbs_upd985xx.cdl
        description     "A device driver for the NEC uPD985xx on-chip USB device"
}

package CYGPKG_NET {
	alias 		{ "Networking" net }
	directory	net/common
	script		net.cdl
        description     "Generic networking support, including TCP/IP."
}

package CYGPKG_NET_OPENBSD_STACK {
	alias 		{ "OpenBSD Stack" openbsd_net }
	directory	net/tcpip
	script		openbsd_net.cdl
        description     "TCP/IP stack from OpenBSD."
}

package CYGPKG_NET_FREEBSD_STACK {
	alias 		{ "FreeBSD Stack" freebsd_net }
	directory	net/bsd_tcpip
	script		freebsd_net.cdl
        description     "TCP/IP stack from FreeBSD, including KAME IPv6."
}

package CYGPKG_NET_FTPCLIENT {
        alias           { "FTP Client" ftpclient }
        directory       net/ftpclient
        script          ftpclient.cdl
        description     "FTP client support for get and put of files."
}

package CYGPKG_SNMPLIB {
	alias 		{ "SNMP library" snmplib }
	directory	net/snmp/lib
	script		snmplib.cdl
        description     "UCD SNMP library."
}

package CYGPKG_SNMPAGENT {
	alias 		{ "SNMP agent" snmpagent }
	directory	net/snmp/agent
	script		snmpagent.cdl
        description     "UCD SNMP agent."
}

package CYGPKG_HTTPD {
	alias 		{ "HTTP server" httpd }
	directory	net/httpd
	script		httpd.cdl
        description     "HTTP server."
}

package CYGPKG_NS_DNS {
	alias 		{ "DNS" dns }
	directory	net/ns/dns
	script		dns.cdl
        description     "DNS client support."
}

package CYGPKG_NET_SNTP {
        alias           { "SNTP support" sntp }
        directory       net/sntp
        script          sntp.cdl
        description "
This package provides a SNTP client which can recieve broadcast time 
information and set the system clock."
}  

package CYGPKG_PPP {
	alias 		{ "PPP support" ppp }
	directory	net/ppp
	script		ppp.cdl
        description     "PPP support."
}

package CYGPKG_NET_IPSEC_LIBIPSEC {
        alias           { "libipsec support" libipsec }
        directory       net/ipsec/libipsec
        script          libipsec.cdl
        description "
This package provides the libipsec library used by racoon etc for 
configuring IPSEC"
}

package CYGPKG_DEVS_ETH_ARM_EDB7XXX {
	alias 		{ "Cirrus Logic ethernet driver for EP7xxx boards" edb7xxx_eth_driver }
	hardware
	directory	devs/eth/arm/edb7xxx
	script		edb7xxx_eth_drivers.cdl
        description     "Ethernet driver for Cirrus Logic EP7xxx based
                         development boards."
}

package CYGPKG_DEVS_ETH_ARM_KS32C5000 {
	alias 		{ "Samsung KS32C5000 ethernet driver" eth_ks32c5000 }
	hardware
	directory	devs/eth/arm/ks32c5000
	script		ks32c5000_eth.cdl
        description     "Ethernet driver for Samsung ks32c5000/S3c4510."
}


package CYGPKG_DEVS_ETH_ARM_AAED2000 {
	alias 		{ "Ethernet driver for Agilent AAED2000 board" aaed2000_eth_driver }
	hardware
	directory	devs/eth/arm/aaed2000
	script		aaed2000_eth_drivers.cdl
        description     "Ethernet driver for Agilent AAED2000
                         development boards."
}
package CYGPKG_DEVS_ETH_AMD_PCNET {
	alias 		{ "AMD PCNET ethernet driver" pcnet_eth_driver }
	hardware
	directory	devs/eth/amd/pcnet
	script		amd_pcnet_eth_drivers.cdl
        description     "Ethernet driver for AMD PCNET controller."
}

package CYGPKG_DEVS_ETH_AMD_LANCEPCI {
	alias 		{ "AMD Lance PCI ethernet driver" lancepci_eth_driver }
	hardware
	directory	devs/eth/amd/lancepci
	script		amd_lancepci_eth_drivers.cdl
        description     "Ethernet driver for AMD Lance PCI controller (vmWare)."
}

package CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA {
	alias 		{ "MIPS Malta board ethernet driver" malta_eth_driver }
	hardware
	directory	devs/eth/mips/malta
	script		mips_mips32_malta_eth_drivers.cdl
        description     "Ethernet driver for MIPS Malta board."
}

package CYGPKG_DEVS_ETH_MN10300_ASB2305 {
	alias 		{ "MN10300 ASB2305 board ethernet driver" asb2305_eth_driver }
	hardware
	directory	devs/eth/mn10300/asb2305
	script		mn10300_asb2305_eth.cdl
        description     "Ethernet driver for MN10300 ASB2305 board."
}

package CYGPKG_DEVS_ETH_VIA_RHINE {
	alias 		{ "VIA Rhine ethernet driver" rhine_eth_driver }
	hardware
	directory	devs/eth/via/rhine
	script		via_rhine_eth_drivers.cdl
        description     "Ethernet driver for VIA Rhine controller."
}

package CYGPKG_DEVS_ETH_SH_HS7729PCI {
	alias 		{ "HS7729PCI ethernet driver" hs7729pci_eth_driver }
	hardware
	directory	devs/eth/sh/hs7729pci
	script		sh_hs7729pci_eth_drivers.cdl
        description     "Ethernet driver for HS7729PCI development boards."
}

package CYGPKG_DEVS_ETH_SH_SE77X9 {
	alias 		{ "SE77X9 ethernet driver" se77x9_eth_driver }
	hardware
	directory	devs/eth/sh/se77x9
	script		sh_se77x9_eth_drivers.cdl
        description     "Ethernet driver for SE77x9 development boards."
}

package CYGPKG_DEVS_ETH_SH_SE7751 {
	alias 		{ "SE7751 ethernet driver" se7751_eth_driver }
	hardware
	directory	devs/eth/sh/se7751
	script		sh_se7751_eth_drivers.cdl
        description     "Ethernet driver for SE7751 board."
}

package CYGPKG_DEVS_ETH_SH_ETHERC {
	alias 		{ "SH2 etherc driver" etherc_eth_driver }
	hardware
	directory	devs/eth/sh/etherc
	script		sh_etherc_eth_drivers.cdl
        description     "Ethernet driver for SH2 etherc controller."
}

package CYGPKG_DEVS_ETH_SH_MICRODEV {
      alias           { "SH4-202 MicroDev onboard ethernet support" devs_eth_sh_md }
      hardware
      directory       devs/eth/sh/sh4_202_md
      script          sh4_202_md_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C111
                   ethernet device on the MicroDev board."
}

package CYGPKG_DEVS_ETH_ARM_EBSA285 {
	alias 		{ "Intel EBSA285 with PRO/100+ ethernet driver"
			   devs_eth_arm_ebsa285 ebsa285_eth_driver }
	hardware
	directory	devs/eth/arm/ebsa285
	script		ebsa285_eth_drivers.cdl
        description     "Ethernet driver for Intel EBSA285 with PRO/100+ boards."
}

package CYGPKG_DEVS_ETH_ARM_FLEXANET {
      alias           { "SA11x0/Flexanet onboard ethernet support" devs_eth_arm_flexanet }
      hardware
      directory       devs/eth/arm/flexanet
      script          flexanet_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C96
                   ethernet device on the Flexanet board."
}

package CYGPKG_DEVS_ETH_ARM_INNOVATOR {
      alias           { "OMAP Innovator onboard ethernet support" devs_eth_arm_innovator }
      hardware
      directory       devs/eth/arm/innovator
      script          innovator_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C96
                   ethernet device on the Innovator board."
}

package CYGPKG_DEVS_ETH_ARM_INTEGRATOR {
        alias           { "ARM INTEGRATOR with Intel PRO/100+ ethernet driver"
                           devs_eth_arm_integrator integrator_eth_driver }
        hardware
        directory       devs/eth/arm/integrator
        script          integrator_eth_drivers.cdl
        description     "Ethernet driver for Intel PRO/100+ boards on ARM INTEGRATOR."
}

package CYGPKG_DEVS_ETH_POWERPC_QUICC {
	alias 		{ "QUICC ethernet driver" quicc_eth_driver }
	hardware
	directory	devs/eth/powerpc/quicc
	script		quicc_eth_drivers.cdl
        description     "Ethernet driver for PowerPC QUICC (MPC8xx) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_MBX {
	alias 		{ "MBX ethernet driver specifics" mbx_eth_driver }
	hardware
	directory	devs/eth/powerpc/mbx
	script		mbx_eth_drivers.cdl
        description     "Ethernet driver specifics for Motorola MBX PowerPC (MPC8xx) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_QUICC2 {
	alias 		{ "QUICC2 ethernet driver" quicc_eth_driver }
	hardware
	directory	devs/eth/powerpc/quicc2
	script		quicc2_eth_drivers.cdl
        description     "Fast ethernet driver for PowerPC QUICC2 (MPC8260) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_FEC {
	alias 		{ "FEC ethernet driver" fec_eth_driver }
	hardware
	directory	devs/eth/powerpc/fec
	script		fec_eth_drivers.cdl
        description     "Ethernet driver for PowerPC FEC (MPC8xxT) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_FCC {
	alias 		{ "FCC ethernet driver" fcc_eth_driver }
	hardware
	directory	devs/eth/powerpc/fcc
	script		fcc_eth_drivers.cdl
        description     "Fast ethernet driver for PowerPC MPCxxx based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_PPC405 {
	alias 		{ "PPC405 ethernet driver" ppc405_eth_driver }
	hardware
	directory	devs/eth/powerpc/ppc405
	script		ppc405_eth_drivers.cdl
        description     "Ethernet driver for PowerPC 405GP based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_VIPER {
	alias 		{ "A&M Viper ethernet driver" viper_eth_driver }
	hardware
	directory	devs/eth/powerpc/viper
	script		viper_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Viper (MPC8xxT) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_EC555 {
	alias 		{ "Crystal LAN ethernet driver for ec555 boards" ec555_eth_driver }
	hardware
	directory	devs/eth/powerpc/ec555
	script		ec555_eth_drivers.cdl
    description     "Ethernet driver for Crystal LAN on ec555 board."
}

package CYGPKG_DEVS_ETH_INTEL_I82559 {
	alias 		{ "Intel 82559 ethernet driver"
			   devs_eth_intel_i82559 i82559_eth_driver }
	hardware
	directory	devs/eth/intel/i82559
	script		intel_i82559_eth_drivers.cdl
        description     "Ethernet driver for Intel 82559 NIC."
}

package CYGPKG_DEVS_ETH_INTEL_I82544 {
	alias 		{ "Intel 82544 ethernet driver"
			   devs_eth_intel_i82544 i82544_eth_driver }
	hardware
	directory	devs/eth/intel/i82544
	script		intel_i82544_eth_drivers.cdl
        description     "Ethernet driver for Intel 82544 NIC."
}

package CYGPKG_DEVS_ETH_INTEL_I21143 {
	alias 		{ "Intel 21143 ethernet driver"
			   devs_eth_intel_i21143 i21143_eth_driver }
	hardware
	directory	devs/eth/intel/i21143
	script		intel_i21143_eth_drivers.cdl
        description     "Ethernet driver for Intel \[DEC\] 21143 NIC."
}

package CYGPKG_DEVS_ETH_MIPS_VRC4375 {
	alias 		{ "NEC MIPS VRC4375 ethernet driver"
			   devs_eth_mips_vrc4375 vrc4375_eth_driver }
	hardware
	directory	devs/eth/mips/vrc4375
	script		vrc4375_eth_drivers.cdl
        description     "Ethernet driver for NEC MIPS VRC4375 'Blue Nile'
			board with Intel \[ex Digital Equipment\]
                        i21143 ethernet interface."
}

package CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT {
	alias 		{ "Ocelot ethernet drivers"
			   devs_eth_mips_rm7000_ocelot ocelot_eth_driver }
	hardware
	directory	devs/eth/mips/ocelot
	script		mips_rm7000_ocelot_eth_drivers.cdl
        description     "Ethernet driver for PMC-Sierra Ocelot board."
}

package CYGPKG_DEVS_ETH_ARM_IQ80321 {
	alias 		{ "Intel IQ80321 with onboard 82544 ethernet driver"
			   devs_eth_arm_iq80321 iq80321_eth_driver }
	hardware
	directory	devs/eth/arm/iq80321
	script		iq80321_eth_drivers.cdl
        description     "Ethernet driver for Intel IQ80321 with onboard 82544 NIC."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310 {
	alias 		{ "Intel IQ80310 with onboard 82559 ethernet driver"
			   devs_eth_arm_iq80310 iq80310_eth_driver }
	hardware
	directory	devs/eth/arm/iq80310
	script		iq80310_eth_drivers.cdl
        description     "Ethernet driver for Intel IQ80310 with onboard 82559 NIC."
}

package CYGPKG_DEVS_ETH_ARM_IXDP425_I82559 {
	alias 		{ "IXDP425 (PCI) / Intel 82559 ethernet driver"
			   devs_eth_arm_ixdp425_i82559 }
	hardware
	directory	devs/eth/arm/ixdp425/i82559
	script		ixdp425_i82559_eth_driver.cdl
        description     "Ethernet driver for IXDP425 with Intel 82559 PCI NIC."
}

package CYGPKG_DEVS_ETH_ARM_GRG_I82559 {
	alias 		{ "GRG / Intel 82559 ethernet driver"
			   devs_eth_arm_grg_i82559 }
	hardware
	directory	devs/eth/arm/grg/i82559
	script		grg_i82559_eth_driver.cdl
        description     "Ethernet driver for GRG with Intel 82559 PCI NIC."
}

package CYGPKG_DEVS_ETH_I386_PC_I82559 {
	alias 		{ "Standard PC with EtherPro 10/100 ethernet device"
			   devs_eth_i386_pc_i82559 pc_etherpro }
	hardware
	directory	devs/eth/i386/pc/i82559
	script		i386_pc_i82559_eth_drivers.cdl
        description     "Ethernet driver for standard PC with Intel 82559 NIC. This is
			 essentially support for a EtherPro 10/100 PCI card."
}

package CYGPKG_DEVS_ETH_I386_PC_I82544 {
	alias 		{ "Standard PC with Intel Gigabit ethernet device"
			   devs_eth_i386_pc_i82544 pc_ether_giga }
	hardware
	directory	devs/eth/i386/pc/i82544
	script		i386_pc_i82544_eth_drivers.cdl
        description     "Ethernet driver for standard PC with Intel 82544 Gigabit NIC."
}

package CYGPKG_DEVS_ETH_I386_PC_LANCEPCI {
	alias 		{ "Standard PC with AMD Lance PCI device"
			   devs_eth_i386_pc_lancepci pc_ether_lancepci }
	hardware
	directory	devs/eth/i386/pc/lancepci
	script		i386_pc_lancepci_eth_drivers.cdl
        description     "Ethernet driver for standard PC with AMD Lance NIC (vmWare)."
}

package CYGPKG_DEVS_ETH_MIPS_ATLAS {
	alias 		{ "MIPS Atlas with onboard SAA9730 ethernet driver"
			   devs_eth_mips_atlas atlas_eth_driver }
	hardware
	directory	devs/eth/mips/atlas
	script		atlas_eth_drivers.cdl
        description     "Ethernet driver for MIPS Atlas with onboard SAA9730 NIC."
}

package CYGPKG_DEVS_ETH_NS_DP83902A {
	alias 		{ "NS DP83902A ethernet driver" dp83902a_eth_driver }
	hardware
	directory	devs/eth/ns/dp83902a
	script		ns_dp83902a_eth_drivers.cdl
        description     "Ethernet driver for NS DP83902A controller."
}

package CYGPKG_DEVS_ETH_NS_DP83816 {
	alias 		{ "NS DP83816 ethernet driver" dp83816_eth_driver }
	hardware
	directory	devs/eth/ns/dp83816
	script		ns_dp83816_eth_drivers.cdl
        description     "Ethernet driver for NS DP83816 controller."
}

package CYGPKG_DEVS_ETH_CL_CS8900A {
	alias 		{ "Cirrus Logic CS8900A ethernet driver" cs8900a_eth_driver }
	hardware
	directory	devs/eth/cl/cs8900a
	script		cl_cs8900a_eth_drivers.cdl
        description     "Ethernet driver for Cirrus Logic CS8900A controller."
}

package CYGPKG_DEVS_ETH_MIPS_UPD985XX {
	alias		{ "NEC uPD985xx ethernet driver" uPD985xx_eth_driver }
	hardware
	directory	devs/eth/mips/upd985xx
	script		upd985xx_eth_drivers.cdl
	description     "NEC uPD985xx ethernet driver"
}

package CYGPKG_DEVS_ETH_MIPS_REFIDT334 {
        alias           { "MIPS IDT 79RC32334 reference platform ethernet driver"
                           devs_eth_refidt334 refidt334_eth_driver }
        hardware
        directory       devs/eth/mips/idt79s334a
        script          refidt334_eth_drivers.cdl
        description     "Ethernet driver for MIPS IDT 79RC32334 reference platform."
}

# Not sure whether this should be "hardware"; if so, it should be mentioned
# in all targets that can use it.
package CYGPKG_DEVS_ETH_CF {
	alias 		{ "PCMCIA (Compact Flash) ethernet drivers" cf_eth_drivers }
	directory	devs/eth/cf
	script		cf_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for PCMCIA (Compact Flash) cardss."
}

package CYGPKG_DEVS_ETH_H8300_AKI3068NET {
	alias 		{ "Akizuki H8/3068 Board ethernet driver" aki3068net_eth_drivers }
	directory	devs/eth/h8300/aki3068net
	script		h8300_aki3068net_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for Akizuki H8/3068 Network
   	                 micom board."
}

package CYGPKG_DEVS_ETH_H8300_H8MAX {
	alias 		{ "H8MAX Board ethernet driver" h8max_eth_drivers }
	directory	devs/eth/h8300/h8max
	script		h8300_h8max_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for H8MAX board."
}

package CYGPKG_DEVS_ETH_H8300_EDOSK2674 {
	alias 		{ "EDOSK-2674 Board ethernet driver" edosk2674_eth_drivers }
	directory	devs/eth/h8300/edosk2674
	script		h8300_edosk2674_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for EDOSK-2674 board."
}

package CYGPKG_DEVS_ETH_MCF5272 {
        alias           { "MCF5272 Fast Ethernet Controller driver" mcf5272_eth_driver}
        hardware
        directory       devs/eth/mcf52xx/mcf5272
        script          mcf5272_eth_driver.cdl
        description     "Ethernet driver for the MCF5272."
}


package CYGPKG_DEVS_ETH_ECOSYNTH {
        alias           { "Synthetic target ethernet driver" ecosyntheth ecosynth_eth_driver }
        directory       devs/eth/synth/ecosynth
        script          syntheth.cdl
        hardware
        description     "Ethernet driver for the synthetic target"
}

package CYGPKG_IO_PCI	{
	alias		{ "PCI configuration library" io_pci }
	directory	io/pci
	script		io_pci.cdl
	hardware
        description "
           This package contains the PCI configuration library."
}

package CYGPKG_IO_WALLCLOCK {
        alias           { "Wallclock device framework" wallclock io_wallclock devices_wallclock device_wallclock }
	directory	io/wallclock
	script          wallclock.cdl
        description "
           This package provides a wallclock device framework. It is
           also necessary to select an actual driver implementation."
}

package CYGPKG_DEVICES_WALLCLOCK_SH3 {
	alias		{ "Wallclock driver for SH3 RTC module" devices_wallclock_sh3 device_wallclock_sh3 }
	directory	devs/wallclock/sh/sh3
	script          wallclock_sh3.cdl
	hardware
        description "
           This package provides a wallclock driver implementation for the
           Hitachi SH3 CPU's RTC module."
}

package CYGPKG_DEVICES_WALLCLOCK_MPC5xx {
	alias		{ "Wallclock driver for mpc5xx RTC module" devices_wallclock_mpc5xx device_wallclock_mpc5xx }
	directory	devs/wallclock/powerpc/mpc5xx
	script          wallclock_mpc5xx.cdl
	hardware
        description "
           This package provides a wallclock driver implementation for the
           Motorola mpc5xx CPU's RTC module."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307 {
	alias		{ "Wallclock driver for Dallas 1307" devices_wallclock_ds1307 device_wallclock_ds1307 }
	directory	devs/wallclock/dallas/ds1307
	script          wallclock_ds1307.cdl
	hardware
        description "
           This package provides a driver implementation for 
           the Dallas 1307 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742 {
	alias		{ "Wallclock driver for Dallas 1742" devices_wallclock_ds1742 device_wallclock_ds1742 }
	directory	devs/wallclock/dallas/ds1742
	script          wallclock_ds1742.cdl
	hardware
        description "
           This package provides a driver implementation for 
           the Dallas 1742 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887 {
	alias		{ "Wallclock driver for Dallas 12887" devices_wallclock_ds12887 device_wallclock_ds12887 }
	directory	devs/wallclock/dallas/ds12887
	script          wallclock_ds12887.cdl
	hardware
        description "
           This package provides a driver implementation for 
           the Dallas 12887 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955 {
	alias		{ "Wallclock driver for REF4955 board" devices_wallclock_ref4955 device_wallclock_ref4955 }
	directory	devs/wallclock/mips/ref4955
	script          wallclock_ref4955.cdl
	hardware
        description "
           This package provides a wallclock driver implementation for the
           Toshiba REF4955 board."
}

package CYGPKG_DEVICES_WALLCLOCK_I386_PC {
         alias          { "Standard PC RTC device" devs_wallclock_i386_pc_ds12887 pc_rtc }
         hardware
         directory      devs/wallclock/i386/pc
         script         i386_pc_wallclock_drivers.cdl
         description    "
            RTC driver for standard PC. This is essentially support for a
            Dallas DS12887 RTC."
}

package CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI {
	alias		{ "Wallclock driver for HS7729PCI board" devices_wallclock_hs7729pci device_wallclock_hs7729pci }
	directory	devs/wallclock/sh/hs7729pci
	script          wallclock_hs7729pci.cdl
	hardware
        description "
           This package provides a wallclock driver implementation for the
           Hitachi HS7729PCI board."
}

package CYGPKG_DEVS_WALLCLOCK_SYNTH {
        alias           { "Wallclock driver for synthetic target" devs_wallclock_synth wallclock_synth }
        directory       devs/wallclock/synth
        script          wallclock_synth.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           synthetic target."
}

package CYGPKG_DEVICES_WALLCLOCK_ARM_AIM711 {
       alias           { "Wallclock driver for AIM 711" devs_wallclock_arm_aim711 aim711_rt
c }
       directory       devs/wallclock/arm/aim711
       script          aim711_wallclock_drivers.cdl
       hardware
        description "
           This package provides a wallclock driver implementation for the
           ARM Industrial Module AIM 711."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_AEB {
	alias		{ "Watchdog driver for ARM/AEB board" devices_watchdog_aeb device_watchdog_aeb }
	directory	devs/watchdog/arm/aeb
	script          watchdog_aeb.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM/AEB board."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_AT91 {
	alias		{ "Watchdog driver for ARM AT91 CPU" devices_watchdog_at91 device_watchdog_at91 }
	directory	devs/watchdog/arm/at91
	script          watchdog_at91.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM AT91 CPU."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285 {
	alias		{ "Watchdog driver for ARM/EBSA285 board" devices_watchdog_ebsa285 device_watchdog_ebsa285 }
	directory	devs/watchdog/arm/ebsa285
	script          watchdog_ebsa285.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM/EBSA285 board."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0 {
	alias		{ "Watchdog driver for StrongARM SA11x0 devices" devices_watchdog_sa11x0 device_watchdog_sa11x0 }
	directory	devs/watchdog/arm/sa11x0
	script          watchdog_sa11x0.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for
           Intel StrongARM SA11x0 integrated devices."
}

package CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300 {
	alias		{ "Watchdog driver for MN10300 chip" devices_watchdog_mn10300 device_watchdog_mn10300 }
	directory	devs/watchdog/mn10300/mn10300
	script          watchdog_mn10300.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           MN10300 chip."
}

package CYGPKG_DEVICES_WATCHDOG_MPC5xx {
	alias		{ "Watchdog driver for mpc5xx processor" devices_watchdog_mpc5xx device_watchdog_mpc5xx }
	directory	devs/watchdog/powerpc/mpc5xx
	script          watchdog_mpc5xx.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           mpc5xx processor family."
}

package CYGPKG_DEVICES_WATCHDOG_SH_SH3 {
	alias		{ "Watchdog driver for the Hitachi SH3 chip" devices_watchdog_sh3 device_watchdog_sh3 }
	directory	devs/watchdog/sh/sh3
	script          watchdog_sh3.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           Hitachi SH3 chip."
}

package CYGPKG_DEVICES_WATCHDOG_H8300_H8300H {
	alias		{ "Watchdog driver for the Hitachi H8/300H chip" devices_watchdog_h8300h device_watchdog_h8300h }
	directory	devs/watchdog/h8300/h8300h
	script          watchdog_h8300h.cdl
	hardware
        description "
           This package provides a watchdog driver implementation for the
           Hitachi H8/300H chip."
}

package CYGPKG_DEVS_WATCHDOG_SYNTH {
	alias		{ "Watchdog driver for the synthetic target" devices_watchdog_synth device_watchdog_synth }
	directory	devs/watchdog/synth
	script          synth_watchdog.cdl
	hardware
        description "
           This package provides a watchdog driver for the eCos
           synthetic target."
}

package CYGPKG_IO_WATCHDOG {
	alias		{ "Watchdog IO device" watchdog io_watchdog }
	directory	io/watchdog
        script          watchdog.cdl
        description "
           This package provides a watchdog device."
}

package CYGPKG_KERNEL {
	alias		{ "eCos kernel" kernel }
	directory	kernel
	script		kernel.cdl
     	description "
This package contains the core functionality of the eCos kernel. It
relies on functionality provided by various HAL packages and by the
eCos infrastructure. In turn the eCos kernel provides support for
other packages such as the device drivers and the uITRON compatibility
layer."
}

package CYGPKG_MEMALLOC {
        alias           { "Dynamic memory allocation" memalloc malloc }
        directory       services/memalloc/common
        script          memalloc.cdl
        description "
This package provides memory allocator infrastructure required for
dynamic memory allocators, including the ISO standard malloc
interface. It also contains some sample implementations."
}

package CYGPKG_LOADER {
        alias           { "Dynamic loader" loader dload }
        directory       services/loader
        script          loader.cdl
        description "
This package provides support for the dynamic executable and
library loader."
}

package CYGPKG_COMPRESS_ZLIB {
        alias           { "Zlib compress/decompress" zlib_compress compress_zlib zlib }
        directory       services/compress/zlib
        script          compress_zlib.cdl
        description "
This package provides zlib compression and decompression support."
}

package CYGPKG_POWER {
	alias 		{ "Power Management support" power }
	directory	services/power/common
	script		power.cdl
	description "
This package provides some generic support for power management."
}

package CYGPKG_CRC {
        alias           { "CRC support" crc }
        directory       services/crc
        script          crc.cdl
        description "
This package provides support for CRC functions, including the 
POSIX 1003 defined CRC algorithm."
}  

package CYGPKG_CPULOAD {
        alias           { "cpuload support" cpuload }
        directory       services/cpuload
        script          cpuload.cdl
        description "
This package measures the CPU load over the last 100ms, 1second 
and 10 second. All loads are returned as a percentage, ie 0-100.
This is only a rough measure."
}     

package CYGPKG_PROFILE_GPROF {
        alias           { "Application profile support" profile_gprof gprof_profile }
        directory       services/profile/gprof
        script          profile_gprof.cdl
        description "
This package instruments applications to collect profiling data,
using a methodology compatible with the gprof utility."
}     
                                   
package CYGPKG_UITRON {
	alias		{ "uITRON compatibility" uitron }
	directory	compat/uitron
	script		uitron.cdl
	description "
eCos supports a uITRON Compatibility Layer, providing full Level S
(Standard) compliance with Version 3.02 of the uITRON Standard, plus
many Level E (Extended) features. uITRON is the premier Japanese
embedded RTOS standard."
}

package CYGPKG_ISOINFRA {
        alias           { "ISO C and POSIX infrastructure" isoinfra }
        directory       isoinfra
        script          isoinfra.cdl
        description "
eCos supports implementations of ISO C libraries and POSIX implementations.
This package provides infrastructure used by all such implementations."
}

package CYGPKG_POSIX {
	alias		{ "POSIX compatibility" posix }
	directory	compat/posix
	script		posix.cdl
	description "
This package enables compatibility with the ISO/IEEE 1003.1 POSIX
standard.  This allows the user application to use a well known
standard API, and starts a thread to invoke the user function
main()"
}

package CYGPKG_LIBC {
	alias		{ "C library" libc clib clibrary }
	directory	language/c/libc/common
	script		libc.cdl
        description  "
The packages under this package enable compatibility with the ISO C
standard - ISO/IEC 9899:1990. This allows the user application to use
well known standard C library functions, and in eCos starts a thread
to invoke the user function main(). This package is a top-level placeholder
to contain the implementations."
}

package CYGPKG_LIBC_I18N {
	alias		{ "ISO C library internationalization" libc_i18n }
	directory	language/c/libc/i18n
	script		i18n.cdl
        description  "
This package provides internationalization functions specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_SETJMP {
	alias		{ "ISO C library non-local jumps" libc_setjmp }
	directory	language/c/libc/setjmp
	script		setjmp.cdl
        description  "
This package provides non-local jump functionality specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_SIGNALS {
	alias		{ "ISO C library signals" libc_signals }
	directory	language/c/libc/signals
	script		signals.cdl
        description   "
This component controls signal functionality, as implemented in
ISO/IEC 9899:1990 chapter 7.7 with the signal() and raise() functions.
As well as allowing a program to send itself signals, it is also
possible to cause hardware exceptions to be signalled to the program
in a similar way."
}

package CYGPKG_LIBC_STARTUP {
	alias		{ "ISO environment startup/termination" libc_startup }
	directory	language/c/libc/startup
	script		startup.cdl
        description   "
            This package manages the control of the
            environment (in the general sense) that an
            application would require for full ISO C / POSIX
            compatibility, including a main() entry point
            supplied with arguments and an environment
            (as retrievable by the getenv() function).
            It also includes at the other end of things,
            what happens when main() returns or exit() is
            called."
}

package CYGPKG_LIBC_STDIO {
	alias		{ "ISO C library standard input/output functions" libc_stdio }
	directory	language/c/libc/stdio
	script		stdio.cdl
        description  "
This package provides standard input/output functions associated
with the header file <stdio.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_STDLIB {
	alias		{ "ISO C library general utility functions" libc_stdlib }
	directory	language/c/libc/stdlib
	script		stdlib.cdl
        description  "
This package provides general utility functions associated
with the header file <stdlib.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_STRING {
	alias		{ "ISO C library string functions" libc_string }
	directory	language/c/libc/string
	script		string.cdl
        description  "
This package provides string functions specified by the ISO C standard
- ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_TIME {
	alias		{ "ISO C library date/time functions" libc_time }
	directory	language/c/libc/time
	script		time.cdl
        description  "
This package provides date and time manipulation functionality specified
by the ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBM {
	alias		{ "Math library" libm mathlib mathlibrary }
	directory	language/c/libm
	script		libm.cdl
        description  "
ISO standard floating point mathematical library containing many
useful functions for mathematical calculations."
}

package CYGPKG_ERROR {
	alias 		{ "Common error code support" error errors }
	directory	error
	script		error.cdl
        description  "
This package contains the common list of error and status codes. It is
held centrally to allow packages to interchange error codes and status
codes in a common way, rather than each package having its own
conventions for error/status reporting. The error codes are modelled
on the POSIX style naming e.g. EINVAL etc. This package also provides
the standard strerror() function to convert error codes to textual
representation, as well as an implementation of the errno idiom."
}
package CYGPKG_CYGMON {
    alias           { "CygMon support via eCos" cygmon }
    directory       cygmon
    script          cygmon.cdl
    description     "
        This package supports the CygMon \[stand-alone debug monitor\]
        using eCos as the underlying board support mechanism."
}

package CYGPKG_REDBOOT {
    alias           { "RedBoot, the Red Hat bootstrap" cygmon }
    directory       redboot
    script          redboot.cdl
    description     "
        This package creates the RedBoot \[stand-alone bootstrap & debug monitor\]
        using eCos as the underlying board support mechanism."
}

package CYGPKG_MICROWINDOWS {
	alias 		{ "Microwindows" mw }
	directory	services/gfx/mw
	script		microwindows.cdl
        description     "Microwindows."
}

package CYGPKG_HAL_SH_SH7750_DREAMCAST {
	alias		{ "SEGA Dreamcast" hal_sh_dreamcast sh_dreamcast_hal }
	directory	hal/sh/dreamcast
	script		hal_sh_sh7750_dreamcast.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on SEGA Dreamcast."
}

# --------------------------------------------------------------------------
# ARM packages
package CYGPKG_HAL_ARM {
	alias		{ "ARM common HAL" hal_arm arm_hal arm_arch_hal }
	directory	hal/arm/arch
	script		hal_arm.cdl
	hardware
	description "
The ARM architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_ARM_PID {
	alias		{ "ARM development board (PID)" hal_arm_pid arm_pid_hal }
	directory	hal/arm/pid
	script		hal_arm_pid.cdl
	hardware
        description "
The pid HAL package provides the support needed to run eCos on a ARM
PID eval board."
}

package CYGPKG_HAL_ARM_AEB {
	alias		{ "ARM evaluation board (AEB-1)" hal_arm_aeb arm_aeb_hal }
	directory	hal/arm/aeb
	script		hal_arm_aeb.cdl
	hardware
        description "
The aeb HAL package provides the support needed to run eCos on a ARM
AEB-1 eval board."
}

package CYGPKG_HAL_ARM_E7T {
	alias		{ "ARM Evaluator7T board (AEB-2)" hal_arm_e7t arm_e7t_hal }
	directory	hal/arm/e7t
	script		hal_arm_e7t.cdl
	hardware
        description "
The e7t HAL package provides the support needed to run eCos on a ARM
Evaluator7T board (aka the AEB-2)."
}

package CYGPKG_HAL_ARM_INTEGRATOR {
        alias           { "ARM development board (INTEGRATOR)" hal_arm_integrator arm_integrator_hal }
        directory       hal/arm/integrator
        script          hal_arm_integrator.cdl
        hardware
        description "
        The INTEGRATOR HAL package provides the support needed to 
        run eCos on a ARM INTEGRATOR eval board."
}

package CYGPKG_HAL_ARM_AT91 {
	alias		{ "Atmel AT91 variant HAL" hal_arm_at91 arm_at91_hal }
	directory	hal/arm/at91/var
	script		hal_arm_at91.cdl
	hardware
        description "
        The at91 HAL package provides the support needed to run eCos on Atmel
        AT91 based targets."
}

package CYGPKG_HAL_ARM_AT91_EB40 {
	alias		{ "Atmel evaluation board (EB40)" hal_arm_at91 arm_at91_hal }
	directory	hal/arm/at91/eb40
	script		hal_arm_at91_eb40.cdl
	hardware
        description "
	The eb40 HAL package provides the support needed to run eCos on an Atmel
	evaluation board (EB40)."
}


package CYGPKG_HAL_ARM_AT91_EB40A {
	alias		{ "Atmel evaluation board (EB40A)" hal_arm_at91_eb40a arm_at91_eb40a_hal }
	directory	hal/arm/at91/eb40a
	script		hal_arm_at91_eb40a.cdl
	hardware
        description "
	The eb40a HAL package provides the support needed to run eCos on an Atmel
	evaluation board (EB40A)."
}

package CYGPKG_HAL_ARM_AT91_EB42 {
	alias		{ "Atmel evaluation board (EB42)" hal_arm_at91_eb42 arm_at91_eb42_hal }
	directory	hal/arm/at91/eb42
	script		hal_arm_at91_eb42.cdl
	hardware
        description "
	The eb42 HAL package provides the support needed to run eCos on an Atmel
	evaluation board (EB42)."
}

package CYGPKG_HAL_ARM_AT91_EB55 {
	alias		{ "Atmel evaluation board (EB55)" hal_arm_at91_eb55 arm_at91_eb55_hal }
	directory	hal/arm/at91/eb55
	script		hal_arm_at91_eb55.cdl
	hardware
        description "
	The eb55 HAL package provides the support needed to run eCos on an Atmel
	evaluation board (EB55)."
}

package CYGPKG_HAL_ARM_EBSA285 {
	alias		{ "Intel EBSA285 StrongARM board" hal_arm_ebsa285 arm_ebsa285_hal }
	directory	hal/arm/ebsa285
	script		hal_arm_ebsa285.cdl
	hardware
        description "
        The EBSA285 HAL package provides the support needed to run
        eCos on a Intel EBSA285 StrongARM eval board."
}

package CYGPKG_HAL_ARM_ARM9 {
	alias		{ "ARM9 variant" hal_arm_arm9 }
	directory	hal/arm/arm9/var
	script		hal_arm_arm9.cdl
	hardware
        description "
        The ARM9 HAL package provides the support needed to run
        eCos on a ARM9 based systems."
}


package CYGPKG_HAL_ARM_ARM9_AAED2000 {
	alias		{ "Agilent AAED2000 unit" hal_arm_arm9_aaed }
	directory	hal/arm/arm9/aaed2000
	script		hal_arm_arm9_aaed2000.cdl
	hardware
        description "
        The AAED2000 HAL package provides the support needed to run
        eCos on an Agilent AAED2000 board."
}

package CYGPKG_HAL_ARM_ARM9_EXCALIBUR {
	alias		{ "Altera Excalibur ARM9 board" hal_arm_arm9_excalibur }
	directory	hal/arm/arm9/excalibur
	script		hal_arm_arm9_excalibur.cdl
	hardware
        description "
        The Excalibur HAL package provides the support needed to run
        eCos on an Altera Excalibur ARM9 board."
}

package CYGPKG_HAL_ARM_ARM9_SMDK2410 {
        alias           { "Samsung ARM9/SMDK2410 development board" hal_arm_arm9_smdk2410 }
        directory       hal/arm/arm9/smdk2410
        script          hal_arm_arm9_smdk2410.cdl
        hardware
        description "
        The SMDK2410 HAL package provides the support needed to run
        eCos on Samsung SMDK2410 and S3c2410x (ARM9) based development boards."
}

package CYGPKG_HAL_ARM_ARM9_INNOVATOR {
	alias		{ "Innovator (ARM)" hal_arm_arm9_innovator }
	directory	hal/arm/arm9/innovator
	script		hal_arm_arm9_innovator.cdl
	hardware
        description "
        The Innovator HAL package provides the support needed to run
        RedBoot on the ARM processor of the Innovator.
	
	NOTE: Full support for eCos is not provided yet.  This HAL
	contains only the minimum amount necessary to run RedBoot
	on the Innovator.  In particular, interrupts are not yet
	supported.  Watch this space for more details in the near
	future."
}

package CYGPKG_HAL_ARM_SA11X0 {
	alias		{ "Intel SA11X0 Chipset" hal_arm_sa11x0 }
	directory	hal/arm/sa11x0/var
	script		hal_arm_sa11x0.cdl
	hardware
        description "
        The SA11X0 HAL package provides the support needed to run
        eCos on a Intel StrongARM SA11X0 based systems."
}

package CYGPKG_HAL_ARM_SA11X0_ASSABET {
	alias		{ "Intel SA1110 Assabet eval board" hal_arm_sa11x0_assabet }
	directory	hal/arm/sa11x0/assabet
	script		hal_arm_sa11x0_assabet.cdl
	hardware
        description "
        The ASSABET HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 evaluation board (assabet)."
}

package CYGPKG_HAL_ARM_SA11X0_CERF {
	alias		{ "Intrinsyc Cerf board" hal_arm_sa11x0_cerf }
	directory	hal/arm/sa11x0/cerf
	script		hal_arm_sa11x0_cerf.cdl
	hardware
        description "
        The CERF HAL package provides the support needed to run
        eCos on a Intrinsyc StrongARM SA1110 Cerf board."
}

package CYGPKG_HAL_ARM_SA11X0_CERFPDA {
	alias		{ "Intrinsyc Cerfpda" hal_arm_sa11x0_cerfpda }
	directory	hal/arm/sa11x0/cerfpda
	script		hal_arm_sa11x0_cerfpda.cdl
	hardware
        description "
        The CERFPDA HAL package provides the support needed to run
        eCos on a Intrinsyc StrongARM SA1110 Cerfpda."
}

package CYGPKG_HAL_ARM_SA11X0_IPAQ {
	alias		{ "Compaq iPAQ Pocket PC" hal_arm_sa11x0_ipaq }
	directory	hal/arm/sa11x0/ipaq
	script		hal_arm_sa11x0_ipaq.cdl
	hardware
        description "
        The IPAQ HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 pocket PC (Compaq iPAQ)."
}

package CYGPKG_HAL_ARM_SA11X0_FLEXANET {
      alias           { "SA1110 Flexanet board" hal_arm_sa11x0_flexanet }
      directory       hal/arm/sa11x0/flexanet
      script          hal_arm_sa11x0_flexanet.cdl
      hardware
      description "
        The FLEXANET HAL package provides the support needed to run
        eCos on an SA1110 Flexanet board."
}

package CYGPKG_HAL_ARM_SNDS {
      alias       { "Samsung SNDS" hal_arm_snds arm_snds_hal}
      directory   hal/arm/snds
      script      hal_arm_snds.cdl
      hardware
      description "
          The SNDS HAL package provides the support needed to run eCos on a
          Samsung SNDS eval board"
}

package CYGPKG_DEVS_ETH_SMSC_LAN91CXX {
	alias 		{ "SMSC LAN91CXX ethernet driver" lan91cxx_eth_driver lan9000_eth_driver }
	hardware
	directory	devs/eth/smsc/lan91cxx
	script		smsc_lan91cxx_eth_drivers.cdl
        description     "Ethernet driver for SMSC LAN91CXX (LAN9000) controller."
}


package CYGPKG_HAL_ARM_SA11X0_NANO {
	alias		{ "Intel SA1110 nanoEngine eval board" hal_arm_sa11x0_nano }
	directory	hal/arm/sa11x0/nano
	script		hal_arm_sa11x0_nano.cdl
	hardware
        description "
        The nanoEngine HAL package provides the support needed to run
        eCos on the Bright Star Engineering nanoEngine StrongARM SA1110 board."
}

package CYGPKG_DEVS_ETH_ARM_NANO {
	alias 		{ "BSE nanoEngine with 82559 ethernet driver"
			   devs_eth_arm_nano nano_eth_driver }
	hardware
	directory	devs/eth/arm/nano
	script		nano_eth_drivers.cdl
        description     "Ethernet driver for SA11x0 nanoEngine with Intel
                         i82559 ethernet interfaces."
}

package CYGPKG_HAL_ARM_SA11X0_BRUTUS {
	alias		{ "Intel SA1100 Brutus eval board" hal_arm_sa11x0_brutus }
	directory	hal/arm/sa11x0/brutus
	script		hal_arm_sa11x0_brutus.cdl
	hardware
        description "
        The BRUTUS HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 evaluation board (brutus)."
}

package CYGPKG_HAL_ARM_SA11X0_SA1100MM {
	alias		{ "Intel SA1100 Multimedia eval board" hal_arm_sa11x0_sa1100mm }
	directory	hal/arm/sa11x0/sa1100mm
	script		hal_arm_sa11x0_sa1100mm.cdl
	hardware
        description "
        The MULTIMEDIA HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 Multimedia evaluation board."
}

package CYGPKG_HAL_ARM_EDB7XXX {
	alias		{ "Cirrus Logic ARM7 based development boards" hal_arm_edb7xxx arm_edb7xxx_hal }
	directory	hal/arm/edb7xxx
	script		hal_arm_edb7xxx.cdl
	hardware
        description "
The EDB7XXX HAL package provides the support needed to run eCos on Cirrus Logic CL-PS7111 and EP7xxx based development boards."
}

package CYGPKG_HAL_ARM_CMA230 {
	alias		{ "Cogent CMA230/222 board" hal_arm_cma230 arm_cma230_hal }
	directory	hal/arm/cma230
	script		hal_arm_cma230.cdl
	hardware
        description "
The cma230 HAL package provides the support needed to run eCos on a Cogent 
CMA230 (ARM7TDMI) or CMA222 (ARM710T) eval board."
}

package CYGPKG_HAL_ARM_AIM711 {
      alias       { "ARM Industial Module AIM 711" hal_arm_aim711 arm_aim711_hal}
      directory   hal/arm/aim711
      script      hal_arm_aim711.cdl
      hardware
      description "
          The ARM Industial Module AIM 711 HAL package provides the support
          needed to run eCos on a ARM Industial Module AIM 711 from
          Vision Systems GmbH."
}

package CYGPKG_HAL_ARM_XSCALE_CORE {
	alias		{ "Intel XScale Core" hal_arm_xscale_core }
	directory	hal/arm/xscale/cores
	script		hal_arm_xscale_core.cdl
	hardware
        description "
        The XScale core HAL package provides the support needed to run eCos
        on all Intel XScale based systems."
}

package CYGPKG_HAL_ARM_XSCALE_IOP310 {
	alias		{ "Intel IOP8310 (IQ80200/IQ80310) XScale chipset" hal_arm_iop310 arm_iop310_hal }
	directory	hal/arm/xscale/iop310
	script		hal_arm_xscale_iop310.cdl
	hardware
	description "
	The IOP310 HAL package provides the support needed to run
	eCos on a system using the Intel XScale IOP310 (IQ80200/80310) chipset."
}

package CYGPKG_HAL_ARM_XSCALE_IQ80310 {
	alias		{ "Intel IQ80310 (Cyclone) eval board" hal_arm_xscale_iq80310 hal_arm_xscale_cyclone }
	directory	hal/arm/xscale/iq80310
	script		hal_arm_xscale_iq80310.cdl
	hardware
	description "
	The IQ80310 HAL package provides the support needed to run
	eCos on an Intel Cyclone evaluation board, utilizing an Intel XScale 
        IQ80200/80310 chipset."
}

package CYGPKG_HAL_ARM_XSCALE_NPWR {
	alias		{ "NPWR Linux Engine" hal_arm_xscale_npwr }
	directory	hal/arm/xscale/npwr
	script		hal_arm_xscale_npwr.cdl
	hardware
	description "
	The NPWR HAL package provides the support needed to run
	eCos on a NPWR Linux Engine, utilizing an Intel XScale 
        IQ80200/80310 chipset."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR {
	alias 		{ "NPWR Linux Engine ethernet drivers" devs_eth_arm_xscale_npwr }
	hardware
	directory	devs/eth/arm/npwr
	script		npwr_eth_drivers.cdl
        description     "Ethernet drivers for NPWR Linux Engine via 82544 NIC."
}

package CYGPKG_HAL_ARM_XSCALE_VERDE {
	alias		{ "Intel XScale 80320 I/O Processor" hal_arm_xscale_verde }
	directory	hal/arm/xscale/verde
	script		hal_arm_xscale_verde.cdl
	hardware
        description "
        The XSCALE HAL package provides the support needed to run
        eCos on Intel 80320 based systems."
}

package CYGPKG_HAL_ARM_XSCALE_IQ80321 {
	alias		{ "Intel XScale IQ80321 eval board" hal_arm_xscale_iq80321 }
	directory	hal/arm/xscale/iq80321
	script		hal_arm_xscale_iq80321.cdl
	hardware
        description "
        The IQ80321 HAL package provides the support needed to run
        eCos on an Intel XScale IQ80321 evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_IXP425 {
	alias		{ "Intel XScale IXP425 Network Processor" hal_arm_xscale_ixp425 }
	directory	hal/arm/xscale/ixp425
	script		hal_arm_xscale_ixp425.cdl
	hardware
        description "
        The XScale IXP425 HAL package provides the support needed to run
        eCos on Intel XScale IXP425 network processor based systems."
}

package CYGPKG_HAL_ARM_XSCALE_IXDP425 {
	alias		{ "Intel XScale IXDP425 Network Processor eval board" hal_arm_xscale_ixdp425 }
	directory	hal/arm/xscale/ixdp425
	script		hal_arm_xscale_ixdp425.cdl
	hardware
        description "
        The IXDP425 HAL package provides the support needed to run
        eCos on an Intel XScale IXDP425 network processor evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_GRG {
	alias		{ "Intel XScale Generic Residential Gateway" hal_arm_xscale_grg }
	directory	hal/arm/xscale/grg
	script		hal_arm_xscale_grg.cdl
	hardware
        description "
        The GRG HAL package provides the support needed to run eCos on an
        Intel Generic Residential Gateway evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_PRPMC1100 {
	alias		{ "Motorola PrPMC1100 PMC for Intel XScale IXC1100" hal_arm_xscale_prpmc1100 }
	directory	hal/arm/xscale/prpmc1100
	script		hal_arm_xscale_prpmc1100.cdl
	hardware
        description "
        The PrPMC1100 HAL package provides the support needed to run eCos on an
        Motorola PrPMC1100 evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_PXA2X0 {
	alias		{ "Intel PXA2X0" hal_arm_xscale_pxa2x0 }
	directory	hal/arm/xscale/pxa2x0
	script		hal_arm_xscale_pxa2x0.cdl
	hardware
		description "
		The PXA2X0 HAL package provides the support needed to run
		eCos on Intel PXA2X0 based systems."
}

package CYGPKG_HAL_ARM_XSCALE_MPC50 {
	alias		{ "MICROPLEX Printer Controller 5.0" hal_arm_xscale_mpc50 }
	directory	hal/arm/xscale/mpc50
	script		hal_arm_xscale_mpc50.cdl
	hardware
        description "
        The MPC50 HAL package provides the support needed to run
        eCos on a MPC 5.0."
}

# --------------------------------------------------------------------------
# SH packages
package CYGPKG_HAL_SH {
	alias		{ "SH common HAL" hal_sh sh_hal sh_arch_hal }
	directory	hal/sh/arch
	script		hal_sh.cdl
	hardware
	description "
           The SH (SuperH) architecture HAL package provides generic
           support for this processor architecture. It is also
           necessary to select variant and target platform HAL
           packages."
}

package CYGPKG_HAL_SH_SH2 {
    alias         { "SH2 architecture" hal_sh_sh2 }
    directory     hal/sh/sh2
    script        hal_sh_sh2.cdl
    hardware
    description   "
        The SH2 (SuperH 2) variant HAL package provides generic
        support for SH2 variant CPUs."
}

package CYGPKG_HAL_SH_SH3 {
    alias         { "SH3 architecture" hal_sh_sh3 }
    directory     hal/sh/sh3
    script        hal_sh_sh3.cdl
    hardware
    description   "
        The SH3 (SuperH 3) variant HAL package provides generic
        support for SH3 variant CPUs."
}

package CYGPKG_HAL_SH_SH4 {
    alias         { "SH4 architecture" hal_sh_sh4 }
    directory     hal/sh/sh4
    script        hal_sh_sh4.cdl
    hardware
    description   "
        The SH4 (SuperH 4) variant HAL package provides generic
        support for SH4 variant CPUs."
}

package CYGPKG_HAL_SH_EDK7708 {
	alias		{ "Hitachi SH7708 board" hal_sh_edk sh_edk_hal }
	directory	hal/sh/edk7708
	script		hal_sh_edk7708.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi SH3 EDK7708 board."
}

package CYGPKG_HAL_SH_SH7708_CQ7708 {
        alias           { "CqREEK SH7708 board" hal_sh_cq sh_cq_hal }
        directory       hal/sh/cq7708
        script          hal_sh_sh7708_cq7708.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a CqREEK SH7708 board."
}

package CYGPKG_HAL_SH_SH7750_CQ7750 {
	alias		{ "CqREEK SH7750 board" hal_sh_cqsh4 sh_cqsh4_hal }
	directory	hal/sh/cq7750
	script		hal_sh_sh7750_cq7750.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a CqREEK SH7750 board."
}


package CYGPKG_HAL_SH_SH7729_HS7729PCI {
	alias		{ "Hitachi HS7729PCI board" hal_sh_sh7729_hs7729pci sh_sh7729_hs7729pci_hal }
	directory	hal/sh/hs7729pci
	script		hal_sh_sh7729_hs7729pci.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi HS7729PCI board."
}

package CYGPKG_HAL_SH_SH77X9_SE77X9 {
	alias		{ "Hitachi SE77x9 board" hal_sh_sh77x9_se77x9 sh_sh77x9_se77x9_hal }
	directory	hal/sh/se77x9
	script		hal_sh_sh77x9_se77x9.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi Solution Engine 77x9 board."
}

package CYGPKG_HAL_SH_SH7751_SE7751 {
	alias		{ "Hitachi SE7751 board" hal_sh_sh7751_se7751 sh_sh7751_se7751_hal }
	directory	hal/sh/se7751
	script		hal_sh_sh7751_se7751.cdl
	hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi Solution Engine 7751 board."
}

package CYGPKG_HAL_SH_SH4_202_MD {
    alias         { "SuperH SH4-202 MicroDev CPU Board" hal_sh_sh4_202_md }
    directory     hal/sh/sh4_202_md
    script        hal_sh_sh4_202_md.cdl
    hardware
    description   "
        The SH4-202 HAL package provides generic
        support for the SuperH SH4-202 MicroDev CPU board."
}

# --------------------------------------------------------------------------
# H8/300 packages
package CYGPKG_HAL_H8300 {
	alias		{ "Hitachi H8300 common HAL" hal_h8300 h8300_hal}
	directory	hal/h8300/arch
	script		hal_h8300.cdl
	hardware
	description "
The Hitachi H8/300 architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_H8300_H8300H {
	alias		{ "Hitachi H8300H variant HAL" hal_h8300h h8300h_hal}
	directory	hal/h8300/h8300h
	script		hal_h8300_h8300h.cdl
	hardware
        description "
The H8/300H HAL package provides the support needed to run eCos on a Hitachi
H8/300H processor."
}

package CYGPKG_HAL_H8300_H8S {
	alias		{ "Hitachi H8S variant HAL" hal_h8s h8300h_hal}
	directory	hal/h8300/h8s
	script		hal_h8300_h8s.cdl
	hardware
        description "
The H8S HAL package provides the support needed to run eCos on a Hitachi
H8S processor."
}

package CYGPKG_HAL_H8300_H8300H_SIM {
	alias		{ "H8/300H simulator" hal_h8300h_sim h8300h_sim_hal }
	directory	hal/h8300/sim
	script		hal_h8300_h8300h_sim.cdl
	hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_H8300_H8300H_AKI3068NET {
	alias		{ "Akizuki H8/3068 board" hal_h8300h_aki3068net h8300h_aki3068net_hal }
	directory	hal/h8300/aki3068net
	script		hal_h8300_h8300h_aki3068net.cdl
	hardware
        description "
           The aki3068net HAL package provides the support needed to run
           eCos on a Akizuki H8/3068 Network micom board." 
}

package CYGPKG_HAL_H8300_H8300H_H8MAX {
	alias		{ "H8MAX board" hal_h8300h_h8max h8300h_h8max_hal }
	directory	hal/h8300/h8max
	script		hal_h8300_h8300h_h8max.cdl
	hardware
        description "
           The h8max HAL package provides the support needed to run
           eCos on a H8MAX board." 
}

package CYGPKG_HAL_H8300_H8S_SIM {
	alias		{ "H8S simulator" hal_h8s_sim h8s_sim_hal }
	directory	hal/h8300/sim_s
	script		hal_h8300_h8s_sim.cdl
	hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_H8300_H8S_EDOSK2674 {
	alias		{ "EDOSK-2674 board" hal_h8s_edosk2674 h8s_edosk2674_hal }
	directory	hal/h8300/edosk2674
	script		hal_h8300_h8s_edosk2674.cdl
	hardware
        description "
           The edosk2674 HAL package provides the support needed to run
           eCos on a Hitachi Micro System Europe EDOSK-2674 Evalution board." 
}

# ==========================================================================
# --------------------------------------------------------------------------
# i386 packages
package CYGPKG_HAL_I386 {
	alias		{ "i386 common HAL" hal_i386 i386_hal i386_arch_hal }
	directory	hal/i386/arch
	script		hal_i386.cdl
	hardware
	description "
    	    The i386 architecture HAL package provides generic
    	    support for this processor architecture. It is also
    	    necessary to select a specific target platform HAL
    	    package."
}

package CYGPKG_HAL_I386_GENERIC {
	alias		{ "i386 generic target" hal_i386_generic }
	directory	hal/i386/generic
	script		hal_i386_generic.cdl
	hardware
        description "
    	    The i386 generic Target HAL package provides support
            for generic IA32 processors, from the 80386 to the latest
            Pentium/Athlon."
	    
}
package CYGPKG_HAL_I386_PCMB {
	alias		{ "i386 PC Motherboard" hal_i386_pcmb }
	directory	hal/i386/pcmb
	script		hal_i386_pcmb.cdl
	hardware
        description "
    	    The i386 PC Motherboard HAL package provides the 
    	    support needed to run eCos binaries on a standard i386
    	    PC motherboard. This is a support package for various
            actual platform specific targets."
}
package CYGPKG_HAL_I386_PC {
	alias		{ "i386 PC target" hal_i386_pc }
	directory	hal/i386/pc
	script		hal_i386_pc.cdl
	hardware
        description "
    	    The i386 PC Target HAL package provides the 
    	    support needed to run eCos binaries on a standard i386
    	    PC."
}

# --------------------------------------------------------------------------
# Synthetic target.
package CYGPKG_HAL_SYNTH {
	alias		{ "Linux synthetic target" linux }
	directory	hal/synth/arch
	script		hal_synth.cdl
	hardware
        description "
    	    The Linux Synthetic Target HAL package provides the 
    	    support needed to run eCos binaries on top of the i386
    	    Linux kernel."
}

package CYGPKG_HAL_SYNTH_I386 {
	alias		{ "Linux/i386 synthetic target" i386_linux }
	directory	hal/synth/i386linux
	script		hal_synth_i386.cdl
	hardware
        description "
            i386 processor-specific support for the Linux synthetic target"
}

# --------------------------------------------------------------------------
# SPARClite packages
package CYGPKG_HAL_SPARCLITE {
	alias		{ "SPARClite common HAL" hal_sparclite sparclite_hal sparclite_arch_hal }
	directory	hal/sparclite/arch
	script		hal_sparclite.cdl
	hardware
	description "
    	    The SPARClite architecture HAL package provides generic support
    	    for this processor architecture. It is also necessary to select
    	    a specific target platform HAL package."
}

package CYGPKG_HAL_SPARCLITE_SLEB {
	alias		{ "Fujitsu MB86800-MA01 board" hal_sparclite_sleb sparclite_sleb_hal }
	directory	hal/sparclite/sleb
	script		hal_sparclite_sleb.cdl
	hardware
        description "
    	    The SPARClite evaluation board HAL package is provided for use
    	    with the Fujitsu MB8683x boards."
}

package CYGPKG_HAL_SPARCLITE_SIM {
	alias		{ "SPARClite simulator" hal_sparclite_sim sparclite_sim_hal }
	directory	hal/sparclite/sim
	script		hal_sparclite_sim.cdl
	hardware
        description "
    	    The SPARClite simulator HAL package is provided for use
    	    with the SPARClite simulator."
}

# --------------------------------------------------------------------------
# SPARC V7/V8 packages
package CYGPKG_HAL_SPARC {
	alias		{ "SPARC V7/V8 common HAL" hal_sparc sparc_hal sparc_arch_hal }
	directory	hal/sparc/arch
	script		hal_sparc.cdl
	hardware
	description "
    	    The SPARC V7/V8 architecture HAL package provides generic support
    	    for this processor architecture. It is also necessary to select
    	    a specific target platform HAL package."
}

package CYGPKG_HAL_SPARC_ERC32 {
	alias		{ "ERC32 processor" hal_sparc_erc32 sparc_erc32_hal }
	directory	hal/sparc/erc32
	script		hal_sparc_erc32.cdl
	hardware
        description "
    	    The ERC32 processor HAL package is provided for use
    	    with both real hardware and the TSIM/ERC32 simulator."
}

package CYGPKG_HAL_SPARC_LEON {
	alias		{ "LEON processor" hal_sparc_leon sparc_leon_hal }
	directory	hal/sparc/leon
	script		hal_sparc_leon.cdl
	hardware
        description "
    	    The LEON processor HAL package is provided for use
    	    with both real hardware and the TSIM/LEON simulator."
}

# --------------------------------------------------------------------------
# PowerPC packages
package CYGPKG_HAL_POWERPC {
	alias		{ "PowerPC common HAL" hal_powerpc powerpc_hal powerpc_arch_hal }
	directory	hal/powerpc/arch
	script		hal_powerpc.cdl
	hardware
	description "
 	    The PowerPC architecture HAL package provides generic
 	    support for this processor architecture. It is also necessary to
    	    select a CPU variant and a specific target platform HAL
    	    package."
}

package CYGPKG_HAL_POWERPC_MPC8260 {
	alias		{ "PowerPC MPC8260 variant HAL" hal_mpc8260 }
	directory	hal/powerpc/mpc8260/
	script		hal_powerpc_mpc8260.cdl
	hardware
        description "
           The PowerPC MPC8260 PowerQUICCII variant HAL package provides 
           support for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC8XXX {
	alias		{ "PowerPC MPC8XXX variant HAL" hal_mpc8xxx }
	directory	hal/powerpc/mpc8xxx/
	script		hal_powerpc_mpc8xxx.cdl
	hardware
        description "
           The PowerPC MPC8XXX PowerQUICCII variant HAL package provides 
           support for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC8xx {
	alias		{ "PowerPC 8xx variant HAL" hal_mpc8xx mpc8xx_hal mpc8xx_arch_hal }
	directory	hal/powerpc/mpc8xx/
	script		hal_powerpc_mpc8xx.cdl
	hardware
        description "
           The PowerPC 8xx variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_PPC60x {
	alias		{ "PowerPC 60x variant HAL" hal_ppc60x ppc60x_hal ppc60x_arch_hal }
	directory	hal/powerpc/ppc60x/
	script		hal_powerpc_ppc60x.cdl
	hardware
        description "
           The PowerPC 60x variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC5xx {
        alias           { "PowerPC 5xx variant HAL" hal_mpc5xx mpc5xx_hal mpc5xx_arch_hal }
        directory       hal/powerpc/mpc5xx/
        script          hal_powerpc_mpc5xx.cdl
        hardware
        description "
           The PowerPC 5xx variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_PPC40x {
	alias		{ "PowerPC 40x variant HAL" hal_ppc40x ppc40x_hal ppc40x_arch_hal }
	directory	hal/powerpc/ppc40x/
	script		hal_powerpc_ppc40x.cdl
	hardware
        description "
           The PowerPC 40x variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_COGENT {
	alias		{ "Cogent CMA286/287 board" hal_powerpc_cogent powerpc_cogent_hal }
	directory	hal/powerpc/cogent
	script		hal_powerpc_cogent.cdl
	hardware
        description "
            The cogent HAL package provides the support needed to run
            eCos on a Cogent board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_CME555 {
        alias           { "Axiom's CME555 evaluation board" hal_powerpc_cme555 powerpc_cme555_hal }
        directory       hal/powerpc/cme555
        script          hal_powerpc_cme555.cdl
        hardware
        description "
            The CME555 HAL package provides the support needed to run
            eCos on a CME555 evaluation board from Axiom Manufacturing."
}

package CYGPKG_HAL_POWERPC_EC555 {
        alias           { "Wuerz development board" hal_powerpc_ec555 powerpc_ec555_hal }
        directory       hal/powerpc/ec555
        script          hal_powerpc_ec555.cdl
        hardware
        description "
            The EC555 HAL package provides the support needed to run
            eCos on an EC555 development board from Wuerz elektronik."
}

package CYGPKG_HAL_POWERPC_FADS {
	alias		{ "Motorola MPC8xxFADS board" hal_powerpc_fads powerpc_fads_hal }
	directory	hal/powerpc/fads
	script		hal_powerpc_fads.cdl
	hardware
        description "
            The FADS HAL package provides the support needed to run
            eCos on a Motorola FADS board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_MBX {
	alias		{ "Motorola MBX860/821 board" hal_powerpc_mbx powerpc_mbx_hal }
	directory	hal/powerpc/mbx
	script		hal_powerpc_mbx.cdl
	hardware
        description "
            The MBX HAL package provides the support needed to run
            eCos on a Motorola MBX board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_VIPER {
	alias		{ "A&M Viper PPC860 board" hal_powerpc_viper powerpc_viper_hal }
	directory	hal/powerpc/viper
	script		hal_powerpc_viper.cdl
	hardware
        description "
            The VIPER HAL package provides the support needed to run
            eCos on a A&M VIPER board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_TS6 {
	alias		{ "Delphi TigerSHARC-6 board" hal_powerpc_ts6 powerpc_ts6_hal }
	directory	hal/powerpc/ts6
	script		hal_powerpc_ts6.cdl
	hardware
        description "
            The TS6 HAL package provides the support needed to run
            eCos on a Delphi TigerSHARC-6 board equipped with a
            PowerPC processor."
}

package CYGPKG_HAL_POWERPC_VADS {
	alias		{ "Motorola MPC8260 VADS board" hal_powerpc_vads powerpc_vads_hal }
	directory	hal/powerpc/vads
	script		hal_powerpc_vads.cdl
	hardware
        description "
            The VADS HAL package provides the support needed to run
            eCos on a Motorola MPC8260 VADS board equipped with a
            PowerPC processor."
}

package CYGPKG_HAL_QUICC {
	alias		{ "Motorola MPC8xx QUICC support" hal_quicc quicc_hal quicc }
	directory	hal/powerpc/quicc
	script		hal_powerpc_quicc.cdl
	hardware
        description "
            The QUICC package provides some of the support needed
            to run eCos on a Motorola MPC8xx processors, using the QUICC
            communications subsystem."
}

package CYGPKG_HAL_POWERPC_SIM {
	alias		{ "PowerPC simulator" hal_powerpc_sim powerpc_sim_hal }
	directory	hal/powerpc/sim
	script		hal_powerpc_sim.cdl
	hardware
        description "
            The minimal simulator HAL package is provided for use when
            only a simple simulation of the processor architecture is
            desired, as opposed to detailed simulation of any specific
            board. In particular it is not possible to simulate any of
            the I/O devices, so device drivers cannot be used."
}

# --------------------------------------------------------------------------
# MIPS packages

package CYGPKG_HAL_MIPS {
	alias		{ "MIPS common HAL" hal_mips mips_hal mips_arch_hal }
	directory	hal/mips/arch/
	script		hal_mips.cdl
	hardware
	description "
    	    The MIPS architecture HAL package provides generic support
    	    for this processor architecture. It is also necessary to
    	    select a CPU variant and a specific target platform HAL
    	    package."
}

package CYGPKG_HAL_MIPS_SIM {
	alias		{ "MIPS simulator" hal_mips_sim mips_sim_hal }
	directory	hal/mips/sim
	script		hal_mips_sim.cdl
	hardware
	description "
           The minimal simulator HAL package is provided for when only
           a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. To use this minimal simulator the command
           `target sim --board=jmr3904pal' should be used from inside
           gdb. It is not possible to use any of the eCos device
           drivers when the simulator is running in this mode"
}

package CYGPKG_HAL_MIPS_TX39 {
	alias		{ "TX39 chip HAL" hal_tx39 tx39_hal tx39_arch_hal }
	directory	hal/mips/tx39/
	script		hal_mips_tx39.cdl
	hardware
        description "
           The TX39 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_TX39_JMR3904 {
	alias		{ "Toshiba JMR-TX3904 board" hal_tx39_jmr3904 tx39_jmr3904_hal }
	directory	hal/mips/jmr3904
	script		hal_mips_tx39_jmr3904.cdl
	hardware
	description "
           The JMR3904 HAL package should be used when targetting the
           actual hardware. The same package can also be used when
           running on the full simulator, since this provides an
           accurate simulation of the hardware including I/O devices.
           To use the simulator in this mode the command
           `target sim --board=jmr3904' should be used from inside gdb."
}

package CYGPKG_HAL_MIPS_MIPS32 {
	alias		{ "MIPS32 HAL" hal_mips32 mips32_hal mips32_arch_hal }
	directory	hal/mips/mips32/
	script		hal_mips_mips32.cdl
	hardware
        description "
           The MIPS 32 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_MIPS64 {
	alias		{ "MIPS64 HAL" hal_mips64 mips64_hal mips64_arch_hal }
	directory	hal/mips/mips64/
	script		hal_mips_mips64.cdl
	hardware
        description "
           The MIPS 64 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_ATLAS {
	alias		{ "MIPS Atlas board" hal_atlas atlas_hal }
	directory	hal/mips/atlas
	script		hal_mips_atlas.cdl
	hardware
	description "
           The Atlas HAL package should be used when targetting the
           actual hardware. "
}
package CYGPKG_HAL_MIPS_MALTA {
	alias		{ "MIPS Malta board" hal_malta malta_hal }
	directory	hal/mips/malta
	script		hal_mips_malta.cdl
	hardware
	description "
           The Malta HAL package should be used when targetting the
           actual hardware. "
}

package CYGPKG_HAL_MIPS_TX49 {
	alias		{ "TX49 chip HAL" hal_tx49 tx49_hal tx49_arch_hal }
	directory	hal/mips/tx49/
	script		hal_mips_tx49.cdl
	hardware
        description "
           The TX49 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_TX49_REF4955 {
	alias		{ "Toshiba TX4955 reference platform" hal_tx49_ref4955 tx49_ref4955_hal }
	directory	hal/mips/ref4955
	script		hal_mips_tx49_ref4955.cdl
	hardware
	description "
           The REF4955 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_RM7000 {
	alias		{ "RM7000 chip HAL" hal_rm7000 rm7000_hal rm7000_arch_hal }
	directory	hal/mips/rm7000/var
	script		hal_mips_rm7000.cdl
	hardware
        description "
           The RM7000 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_RM7000_OCELOT {
	alias		{ "PMC-Sierra Ocelot platform" hal_rm7000_ocelot rm7000_ocelot_hal }
	directory	hal/mips/rm7000/ocelot
	script		hal_mips_rm7000_ocelot.cdl
	hardware
	description "
           The Ocelot HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300 {
	alias		{ "VR4300 chip HAL" hal_vr4300 vr4300_hal vr4300_arch_hal }
	directory	hal/mips/vr4300/
	script		hal_mips_vr4300.cdl
	hardware
        description "
           The VR4300 variant HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_VR4300_VRC4373 {
	alias		{ "NEC VRC4373 board" hal_vrc4373 vrc4373_hal }
	directory	hal/mips/vrc4373
	script		hal_mips_vr4300_vrc4373.cdl
	hardware
	description "
           The VRC4373 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300_VRC4375 {
	alias		{ "NEC VRC4375 board" hal_vrc4375 vrc4375_hal }
	directory	hal/mips/vrc4375
	script		hal_mips_vr4300_vrc4375.cdl
	hardware
	description "
           The VRC4375 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300_VRC437X {
	alias		{ "NEC VRC437X support" hal_vrc437x vrc437x_hal }
	directory	hal/mips/vrc437x
	script		hal_mips_vr4300_vrc437x.cdl
	hardware
	description "
           The VRC437X HAL package should be used when targetting harware
           that contains either a VRC437X companion chip."
}

package CYGPKG_HAL_MIPS_UPD985XX {
	alias		{ "upd985xx chip HAL" hal_upd985xx upd985xx_hal upd985xx_arch_hal }
	directory	hal/mips/upd985xx/
	script		hal_mips_upd985xx.cdl
	hardware
        description "
           The UPD985XX variant HAL package provides generic support
           for this NEC system-on-chip processor architecture, uPD985xx.
	   It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_IDT32334 {
	alias		{ "MIPS IDT32334 variant HAL" hal_idt32334 idt32334_hal idt32334_arch_hal }
	directory	hal/mips/idt32334
	script		hal_mips_idt32334.cdl
	hardware
        description "
           The IDT32334 variant HAL package provides generic support
           for platforms based on this variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_IDT32334_REFIDT334 {
	alias		{ "MIPS IDT79S334A reference platform" hal_idt32334_refIDT334 idt32334_refIDT334_hal }
	directory	hal/mips/idt79s334a
	script		hal_mips_idt32334_refidt334.cdl
	hardware
	description "
           The REFIDT334 HAL package should be used when targetting the
           actual hardware."
}

# --------------------------------------------------------------------------
# MN10300 packages

package CYGPKG_HAL_MN10300 {
	alias		{ "MN10300 common HAL" hal_mn10300 mn10300_hal mn10300_arch_hal }
	directory	hal/mn10300/arch
	script		hal_mn10300.cdl
	hardware
	description "
           The MN10300 architecture HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM31 {
	alias		{ "MN10300 AM31 variant HAL" hal_mn10300_am31 mn10300_am31_hal }
	directory	hal/mn10300/am31
	script		hal_mn10300_am31.cdl
	hardware
        description "
           The MN10300 AM31 variant HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM31_SIM {
	alias		{ "MN10300 simulator" hal_mn10300_sim mn10300_sim_hal }
	directory	hal/mn10300/sim
	script		hal_mn10300_am31_sim.cdl
	hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_MN10300_AM31_STDEVAL1 {
	alias		{ "Matsushita stdeval1 board" hal_mn10300_stdeval1 mn10300_stdeval1_hal }
	directory	hal/mn10300/stdeval1
	script		hal_mn10300_am31_stdeval1.cdl
	hardware
        description "
           The stdeval1 HAL package should be used when targetting the
           actual hardware. The same package can also be used when
           running on the full MN10300 simulator, since this provides
           an accurate simulation of the full hardware including I/O
           devices."
}
package CYGPKG_HAL_MN10300_AM33 {
	alias		{ "MN10300 AM33 variant HAL" hal_mn10300_am33 mn10300_am33_hal }
	directory	hal/mn10300/am33
	script		hal_mn10300_am33.cdl
	hardware
        description "
           The MN10300 AM33 variant HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM33_STB {
	alias		{ "Matsushita STB board" hal_mn10300_am33_stb mn10300_am33_stb_hal }
	directory	hal/mn10300/stb
	script		hal_mn10300_am33_stb.cdl
	hardware
        description "
           The STB HAL package should be used when targetting the
           actual hardware for the AM33 STB evaluation board."
}

package CYGPKG_HAL_MN10300_AM33_ASB {
	alias		{ "Matsushita ASB2303 board" hal_mn10300_am33_asb mn10300_am33_asb_hal }
	directory	hal/mn10300/asb
	script		hal_mn10300_am33_asb.cdl
	hardware
        description "
           The ASB2303 HAL package should be used when targetting the
           actual hardware for the AM33 ASB2303 evaluation board."
}

package CYGPKG_HAL_MN10300_AM33_ASB2305 {
	alias		{ "Matsushita ASB2305 board" hal_mn10300_am33_asb2305
			  mn10300_am33_asb2305_hal }
	directory	hal/mn10300/asb2305
	script		hal_mn10300_am33_asb2305.cdl
	hardware
        description "
           The ASB2305 HAL package should be used when targetting the
           actual hardware for the AM33 ASB2305 evaluation board."
}

# --------------------------------------------------------------------------
# NEC packages
package CYGPKG_HAL_V85X {
	alias		{ "NEC V85x common HAL" hal_v85x nec_arch_hal }
	directory	hal/v85x/arch
	script		hal_v85x.cdl
	hardware
	description "
The NEC V85x architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_V85X_V850 {
	alias		{ "NEC V850 variant HAL" hal_v85x_v850 nec_v850_hal }
	directory	hal/v85x/v850
	script		hal_v85x_v850.cdl
	hardware
        description "
The V850 HAL package provides the support needed to run eCos on a NEC V850
processor."
}

package CYGPKG_HAL_V85X_V850_CEB {
	alias		{ "Cosmo CEB-V850/SA1 board" hal_v85x_v850_ceb nec_v850_ceb_hal }
	directory	hal/v85x/ceb_v850
	script		hal_v85x_ceb_v850.cdl
	hardware
        description "
The CEB-V850/SA1 HAL package provides the support needed to run eCos on a Cosmo CEB-V850/SA1
evaluation board."
}

# --------------------------------------------------------------------------
# m68k packages

package CYGPKG_HAL_M68K {
    alias       { "m68k common HAL" hal_m68k m68k_hal m68k_arch_hal }
    directory   hal/m68k/arch
    script      hal_m68k.cdl
    hardware

        description   "The m68k  architecture  HAL  package  provides  generic
                    support for  this  processor  architecture.   It  is  also
                    necessary  to  select  a  specific  target  platform   HAL
                    package."

}

package CYGPKG_HAL_M68K_MCF52xx {
    alias       { "68k/Coldfire version 2 core variant HAL"
                   hal_m68k_mcf52xx
                   m68k_mcf52xx_hal }
    directory   hal/m68k/mcf52xx/var
    script      hal_m68k_mcf52xx.cdl
    hardware

    description   "The 68k/Coldfire version 2  core  variant  HAL  package
                  provides generic support for the version 2 Coldfire  core.
                  It is also necessary to select a specific target  platform
                  HAL package."
}

package CYGPKG_HAL_M68K_MCF52xx_MCF5272 {
    alias       { "mcf5272 68k/Coldfire processor variant HAL"
                  hal_m68k_mcf52xx_mcf5272
                      m68k_mcf52xx_mcf5272_hal }
    directory   hal/m68k/mcf52xx/mcf5272/proc
    script      hal_m68k_mcf52xx_mcf5272.cdl
    hardware

    description   "The mcf5272 68k/Coldfire processor variant HAL  package
                  provides generic support for this processor  architecture.
                  It is also necessary to select a specific target  platform
                  HAL package."

}

package CYGPKG_HAL_M68K_MCF52xx_MCF5272_MCF5272C3 {
    alias       { "Motorola mcf5272c3 evaluation board platform HAL"
                  hal_m68k_mcf52xx_mcf5272_mcf5272c3
                      m68k_mcf52xx_mcf5272_mcf5272c3_hal }
    directory   hal/m68k/mcf52xx/mcf5272/mcf5272c3/plf
    script      hal_m68k_mcf52xx_mcf5272_mcf5272c3.cdl
    hardware

    description   "The Motorola  mcf5272c3 evaluation  board platform  HAL
                  package should be used when targeting the actual  hardware
                  for the Motorola mcf5272c3 evaluation board platform."

}

# --------------------------------------------------------------------------
# CalmRISC16 packages

package CYGPKG_HAL_CALM16 {
	alias		{ "CalmRISC16 common HAL" hal_calm16 calm16_hal calm16_arch_hal }
	directory	hal/calmrisc16/arch/
	script		hal_calm16.cdl
	hardware
	description "
    	    The CalmRISC16 architecture HAL package provides generic support
    	    for this processor architecture. It is also necessary to
    	    select a CPU variant and a specific target platform HAL
    	    package."
}

package CYGPKG_HAL_CALM16_CORE {
	alias		{ "CORE HAL" hal_calm16core calm16core_hal calm16core_arch_hal }
	directory	hal/calmrisc16/core/
	script		hal_calm16_core.cdl
	hardware
        description "
           The CalmRISC16 Core architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_CALM16_CEB {
	alias		{ "Core eval board" hal_ceb ceb_hal }
	directory	hal/calmrisc16/ceb
	script		hal_calm16_ceb.cdl
	hardware
	description "
           The CalmRISC16 HAL package should be used when targetting the
           actual hardware. "
}
# --------------------------------------------------------------------------
# CalmRISC32 packages

package CYGPKG_HAL_CALM32 {
	alias		{ "CalmRISC32 common HAL" hal_calm32 calm32_hal calm32_arch_hal }
	directory	hal/calmrisc32/arch/
	script		hal_calm32.cdl
	hardware
	description "
    	    The CalmRISC32 architecture HAL package provides generic support
    	    for this processor architecture. It is also necessary to
    	    select a CPU variant and a specific target platform HAL
    	    package."
}

package CYGPKG_HAL_CALM32_CORE {
	alias		{ "CORE HAL" hal_calm32core calm32core_hal calm32core_arch_hal }
	directory	hal/calmrisc32/core/
	script		hal_calm32_core.cdl
	hardware
}

package CYGPKG_HAL_CALM32_CEB {
	alias		{ "Core eval board" hal_ceb ceb_hal }
	directory	hal/calmrisc32/ceb
	script		hal_calm32_ceb.cdl
	hardware
	description "
           The CalmRISC32 HAL package should be used when targetting the
           actual hardware. "
}


# --------------------------------------------------------------------------
# FUJITSU packages
package CYGPKG_HAL_FRV {
	alias		{ "FR-V (Fujitsu) common HAL" hal_frv frv_hal frv_arch_hal }
	directory	hal/frv/arch
	script		hal_frv.cdl
	hardware
	description "
The FRV architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_FRV_FRV400 {
	alias		{ "FUJITSU development board (FR-V 400)" hal_frv_frv400 frv_frv400_hal }
	directory	hal/frv/frv400
	script		hal_frv_frv400.cdl
	hardware
        description "
The FRV400 HAL package provides the support needed to run eCos on a FUJITSU
MB93091 (FR-V 400) eval board."
}

package CYGPKG_DEVS_ETH_FRV_FRV400 {
	alias 		{ "Fujitsu FR-V 400 with 82559 ethernet driver"
			   devs_eth_frv_frv400 frv400_eth_driver }
	hardware
	directory	devs/eth/frv/frv400
	script		frv400_eth_drivers.cdl
        description     "Ethernet driver for Fujitsu FR-V 400 with Intel
                         i82559 ethernet interfaces."
}
# --------------------------------------------------------------------------

# ==========================================================================

# --------------------------------------------------------------------------
# FRV targets
target frv400 {
	alias { "Fujitsu development board (FR-V 400)" FRV400 }
	packages { CYGPKG_HAL_FRV
                   CYGPKG_HAL_FRV_FRV400
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_FRV_FRV400
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_FLASH_FRV_FRV400
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
The frv400 target provides the packages needed to run eCos on a Fujistu
development board (FR-V 400)."
}



# --------------------------------------------------------------------------
# ARM Targets

target pid {
	alias { "ARM development board (PID)" PID }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_PID
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
	           CYGPKG_IO_SERIAL_ARM_PID
                   CYGPKG_DEVS_FLASH_ARM_PID
                   CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
        }
        description "
The pid target provides the packages needed to run eCos on an ARM
development board (formerly known as PID)."
}

target aeb {
	alias { "ARM evaluation board (AEB-1)" aeb1 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AEB
	           CYGPKG_IO_SERIAL_ARM_AEB
                   CYGPKG_DEVICES_WATCHDOG_ARM_AEB
        }
        description "
The aeb target provides the packages needed to run eCos on an ARM
evaluation board (AEB-1)."
}

target e7t {
	alias { "ARM Evaluator7T board (AEB-2)" aeb2 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_E7T
                   CYGPKG_DEVS_FLASH_ARM_E7T
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_SST_39VFXXX
	           CYGPKG_IO_SERIAL_ARM_E7T
                   CYGPKG_DEVS_ETH_ARM_KS32C5000
        }
        description "
 The e7t target provides the packages needed to run eCos on an ARM
 Evaluator7T board (aka AEB-2)."
}

target integrator_arm7 {
        alias { "ARM INTEGRATOR development board w/ ARM7TDMI" integrator }
        packages { CYGPKG_HAL_ARM 
                   CYGPKG_HAL_ARM_INTEGRATOR 
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_ARM_INTEGRATOR
		   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
		   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_INTEGRATOR
        }
        description "
        The INTEGRATOR_ARM7 target provides the packages needed to 
        run eCos on an ARM development board with an ARM7TDMI core
        module installed."
}

target integrator_arm9 {
        alias { "ARM INTEGRATOR development board w/ ARM966" }
        packages { CYGPKG_HAL_ARM
		   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_INTEGRATOR 
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_ARM_INTEGRATOR
		   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
		   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_INTEGRATOR
        }
        description "
        The INTEGRATOR_ARM9 target provides the packages needed to 
        run eCos on an ARM development board with an ARM966 core
        module installed."
}

target eb40 {
	alias { "Atmel evaluation board (EB40)" at91 at91_eb40 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB40
                   CYGPKG_DEVS_FLASH_EB40
                   CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
        The eb40 target provides the packages needed to run eCos on an Atmel
        evaluation board (EB40)."
}

target eb40a {
	alias { "Atmel evaluation board (EB40A)" at91_eb40a }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB40A
                   CYGPKG_DEVS_FLASH_EB40A
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
	The eb40a target provides the packages needed to run eCos on an Atmel
	evaluation board (EB40A)."
}

target eb42 {
	alias { "Atmel evaluation board (EB42)" at91_eb42 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB42
                   CYGPKG_DEVS_FLASH_EB42
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
        }
        description "
	The eb42 target provides the packages needed to run eCos on an Atmel
	evaluation board (EB42)."
}

target eb55 {
	alias { "Atmel evaluation board (EB55)" at91_eb55 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB55
                   CYGPKG_DEVS_FLASH_EB55
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
	The eb55 target provides the packages needed to run eCos on an Atmel
	evaluation board (EB55)."
}


target ebsa285 {
	alias { "Intel EBSA285 StrongARM board" ebsa }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_EBSA285
                   CYGPKG_IO_PCI
		   CYGPKG_DEVS_ETH_ARM_EBSA285
                   CYGPKG_DEVS_ETH_INTEL_I82559
		   CYGPKG_IO_SERIAL_ARM_EBSA285
                   CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285
		   CYGPKG_DEVS_FLASH_EBSA285
        }
        description "
        The ebsa285 target provides the packages needed to run
        eCos on an Intel EBSA285 StrongARM board."
}


target aaed2000 {
	alias { "Agilent AAED2000 unit" aaed }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_AAED2000
                   CYGPKG_DEVS_FLASH_ARM_AAED2000
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_ETH_CL_CS8900A
                   CYGPKG_DEVS_ETH_ARM_AAED2000
                   CYGPKG_DEVS_KBD_AAED2000
                   CYGPKG_DEVS_TOUCH_AAED2000
        }
        description "
        The AAED2000 target provides the packages needed to run
        eCos on an Agilent AAED2000 board."
}

target excalibur_arm9 {
	alias { "Altera ARM9/Excalibur board" excalibur_arm9 epxa10 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_EXCALIBUR
                   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_EXCALIBUR
        }
        description "
        The Excalibur target provides the packages needed to run
        eCos on an Altera Excalibur board."
}

target smdk2410 {
        alias { "Samsung ARM9/SMDK2410 development board" smdk2410 s3c2410x }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_SMDK2410
                   CYGPKG_IO_SERIAL_ARM_SMDK2410
                   CYGPKG_DEVS_FLASH_ARM_SMDK2410
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
        The SMDK2410 target provides the packages needed to run eCos on 
        Samsung S3c2410x (ARM920T) based development boards (SMDK2410)."
}

target innovator {
	alias { "Innovator (ARM) board" innovator }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_INNOVATOR
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_ARM_INNOVATOR
		   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
		   CYGPKG_DEVS_ETH_ARM_INNOVATOR
        }
        description "
        The Innovator HAL package provides the support needed to run
        RedBoot on the ARM processor of the Innovator.
	
	NOTE: Full support for eCos is not provided yet.  This HAL
	contains only the minimum amount necessary to run RedBoot
	on the Innovator.  In particular, interrupts are not yet
	supported.  Watch this space for more details in the near
	future."
}

target assabet {
	alias { "Intel StrongARM SA1110 board" assabet }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_ASSABET
		   CYGPKG_IO_SERIAL_ARM_SA11X0
		   CYGPKG_DEVS_PCMCIA_ASSABET
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_ASSABET
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
		   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_NS_DP83902A
        }
        description "
        The assabet target provides the packages needed to run
        eCos on an Intel StrongARM SA1110 evaluation board."
}

target cerf {
	alias { "Intrinsyc SA1110 Cerf board" cerf cerf_cube }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_CERF
		   CYGPKG_IO_SERIAL_ARM_SA11X0
		   CYGPKG_DEVS_PCMCIA_CERF
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_CERF
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
		   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
		   CYGPKG_DEVS_ETH_ARM_CERF
                   CYGPKG_DEVS_ETH_CL_CS8900A
        }
        description "
        The cerf target provides the packages needed to run
        eCos on an Intrinsyc SA1110 Cerf board."
}

target cerfpda {
	alias { "Intrinsyc SA1110 Cerfpda" cerf_pda }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_CERFPDA
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
	           CYGPKG_IO_SERIAL_ARM_CERFPDA
		   CYGPKG_IO_SERIAL_ARM_SA11X0
		   CYGPKG_DEVS_PCMCIA_CERFPDA
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_CERFPDA
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
		   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
		   CYGPKG_DEVS_ETH_ARM_CERFPDA
                   CYGPKG_DEVS_ETH_CL_CS8900A
        }
        description "
        The cerfpda target provides the packages needed to run
        eCos on an Intrinsyc SA1110 cerfpda."
}

target ipaq {
	alias { "Compaq iPAQ Pocket PC" ipaq }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_IPAQ
		   CYGPKG_IO_SERIAL_ARM_SA11X0
		   CYGPKG_DEVS_PCMCIA_IPAQ
                   CYGPKG_DEVS_FLASH_IPAQ
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_TOUCH_IPAQ
                   CYGPKG_DEVS_KBD_IPAQ
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_NS_DP83902A
        }
        description "
        The IPAQ target provides the packages needed to run
        eCos on an Intel StrongARM SA1110 Pocket PC (Compaq iPAQ)."
}


target nano {
	alias { "nanoEngine StrongARM SA1110 board" nano nanoEngine }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_NANO
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_FLASH_NANO
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_ARM_NANO
                   CYGPKG_DEVS_ETH_INTEL_I82559
        }
        description "
        The nanoEngine target provides the packages needed to run
        eCos on a Bright Star Engineering nanoEngine StrongARM SA1110 board."
}

target flexanet {
      alias { "Flexanet StrongARM SA1110 platform" flexanet }
      packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_FLEXANET
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_FLEXANET
                   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
                   CYGPKG_DEVS_ETH_ARM_FLEXANET
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
        }
        description "
          The Flexanet target provides the packages needed to run
          eCos on an SA1110 Flexanet board."
}

target brutus {
	alias { "Intel StrongARM SA1100 board" brutus }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_BRUTUS
		   CYGPKG_IO_SERIAL_ARM_SA11X0
        }
        description "
        The brutus target provides the packages needed to run
        eCos on an Intel StrongARM SA1100 evaluation board."
}

target sa1100mm {
	alias { "Intel StrongARM SA1100 Multimedia board" sa1100mm }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_SA1100MM
		   CYGPKG_IO_SERIAL_ARM_SA11X0
		   CYGPKG_DEVS_FLASH_SA1100MM
        }
        description "
        The sa1100mm target provides the packages needed to run
        eCos on an Intel StrongARM SA1100 Multimedia evaluation board."
}

target iq80310 {
 	alias { "Intel IQ80310 XScale board" cyclone iq80310 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IOP310
                   CYGPKG_HAL_ARM_XSCALE_IQ80310
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
                   CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
        }
        description "
        The iq80310 target provides the packages needed to run
        eCos on a Cyclone IQ80310 board."
}

target npwr {
	alias { "NPWR Linux Engine (Intel XScale)" npwr }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IOP310
                   CYGPKG_HAL_ARM_XSCALE_NPWR
                   CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
                   CYGPKG_DEVS_ETH_INTEL_I82544
                   CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
        }
        description "
        The npwr target provides the packages needed to run
        eCos on a NPWR Linux Engine."
}

target iq80321 {
	alias { "Intel XScale IQ80321 Board" iq80321 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_VERDE
                   CYGPKG_HAL_ARM_XSCALE_IQ80321
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
		   CYGPKG_IO_SERIAL_ARM_IQ80321
                   CYGPKG_DEVS_ETH_INTEL_I82544
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_IQ80321
                   CYGPKG_DEVS_ETH_ARM_IQ80321
        }
        description "
        The IQ80321 target provides the packages needed to run
        eCos on an Intel XScale IQ80321 board."
}

target ixdp425 {
	alias { "IXDP425 board" ixdp425 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
	           CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_IXDP425
		   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
		   CYGPKG_DEVS_ETH_ARM_IXDP425_I82559
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_IXDP425
        }
        description "
        The ixdp425 target provides the packages needed to run
        eCos on an Intel network processor evaluation board."
}

target grg {
	alias { "Generic Residential Gateway" grg }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
	           CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_GRG
		   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_GRG_I82559
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_GRG
        }
        description "
        The grg target provides the packages needed to run
        eCos on an Intel Generic Residential Gateway board."
}

target prpmc1100 {
	alias { "Motorola PrPMC1100" prpmc1100 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
	           CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_PRPMC1100
		   CYGPKG_IO_PCI
                   CYGPKG_DEVS_FLASH_STRATA
		   CYGPKG_DEVS_FLASH_PRPMC1100
        }
        description "
        The prpmc1100 target provides the packages needed to run
        eCos on a Motorola PrPMC1100."
}

target edb7xxx {
        alias		{ "Cirrus Logic EDB7xxx development board" edb7211 eb7xxx eb7211 }
	packages	{ CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_EDB7XXX
			  CYGPKG_DEVS_ETH_ARM_EDB7XXX
                          CYGPKG_DEVS_ETH_CL_CS8900A
	                  CYGPKG_IO_SERIAL_ARM_EDB7XXX
			  CYGPKG_DEVS_FLASH_EDB7XXX
        }
        description "
The edb7xxx target provides the packages needed to run eCos on the Cirrus Logic EDB7xxx development boards."
    }

target cma230 {
        alias		{ "Cogent CMA230/222 board" cma222 }
	packages	{ CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_CMA230
	                  CYGPKG_IO_SERIAL_ARM_CMA230
        }
        description "
The cma230 target provides the packages needed to run eCos on a Cogent 
CMA230 (ARM7TDMI) or CMA222 (ARM710T) board."
    }


target snds {
      alias { "Samsung SNDS" SNDS snds snds100 }
      packages { CYGPKG_HAL_ARM 
                 CYGPKG_HAL_ARM_SNDS 
                 CYGPKG_DEVS_ETH_ARM_KS32C5000
               }
      enable { CYGHWR_HAL_ARM_BIGENDIAN }
      description "
        The snds target provides the packages needed to run eCos on a
        Samsung SNDS eval board."
}

target aim711 {
      alias { "ARM Industrial Module AIM 711" AIM711 aim711 }
      packages {
                   CYGPKG_HAL_ARM 
                   CYGPKG_HAL_ARM_AIM711 
                   CYGPKG_DEVS_FLASH_SST_39VFXXX
                   CYGPKG_DEVS_FLASH_ARM_AIM711
                   CYGPKG_DEVS_ETH_ARM_KS32C5000
                   CYGPKG_IO_SERIAL_ARM_AIM711
                   CYGPKG_IO_SERIAL_ARM_S3C4510
                   CYGPKG_IO_SERIAL_ARM_AIM711_S3C4510
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_AIM711_16X5X
                   CYGPKG_DEVICES_WALLCLOCK_ARM_AIM711
                   CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307 
               }
      description "
        The aim711 target provides the packages needed to run eCos on a
        ARM Industrial Module AIM 711."
 }


target mpc50 {
	alias { "MICROPLEX Printer Controller 5.0" mpc50 }
	packages {
				CYGPKG_HAL_ARM
				CYGPKG_HAL_ARM_XSCALE_CORE
				CYGPKG_HAL_ARM_XSCALE_PXA2X0
				CYGPKG_HAL_ARM_XSCALE_MPC50
				CYGPKG_DEVS_FLASH_STRATA
				CYGPKG_DEVS_FLASH_MPC50
        }
        description "
        MICROPLEX Printer Controller 5.0"
}

# --------------------------------------------------------------------------
# SH targets

target sh7708 {
	alias       { "Hitachi EDK/SH7708 board" edk7708 }
	packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_EDK7708
                      CYGPKG_DEVICES_WALLCLOCK_SH3 
	              CYGPKG_IO_SERIAL_SH_SCI
	              CYGPKG_IO_SERIAL_SH_EDK7708
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVS_FLASH_SH_EDK7708
                      CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
        }
        description "
           The sh7708 target provides the packages needed to run
           eCos on a Hitachi EDK/SH7708 board."
}
target cq7708 {
        alias { "CqREEK SH7708 board" cq7708 }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH3
                   CYGPKG_HAL_SH_SH7708_CQ7708
	           CYGPKG_IO_SERIAL_SH_SCI
	           CYGPKG_IO_SERIAL_SH_CQ7708
        }
        description "
           The cq7708 target provides the packages needed to run
           eCos on a CqREEK SH7708 board."
}

target cq7750 {
        alias { "CqREEK SH7750 board" cqsh4 }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH4
                   CYGPKG_HAL_SH_SH7750_CQ7750
		   CYGPKG_DEVS_FLASH_CQ7750
		   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_IO_SERIAL_SH_SCIF }
        description "
           The sh7750 target provides the packages needed to run
           eCos on a CqREEK SH7750 board."
}

target hs7729pci {
        alias       { "Hitachi HS7729PCI board" hs7729 }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_SH7729_HS7729PCI
                      CYGPKG_DEVS_FLASH_SH_HS7729PCI
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_IO_PCI
                      CYGPKG_DEVS_ETH_SH_HS7729PCI
                      CYGPKG_DEVS_ETH_VIA_RHINE
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI
                      CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
        }
        description "
           The hs7729pci target provides the packages needed to run
           eCos on a Hitachi HS7729PCI board."
}

target se77x9 {
        alias       { "Hitachi SE77x9 board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_SH77X9_SE77X9
                      CYGPKG_DEVS_FLASH_SH_SE77X9
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_DEVS_ETH_NS_DP83902A
                      CYGPKG_DEVS_ETH_SH_SE77X9
                      CYGPKG_IO_SERIAL_SH_SE77X9
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_IO_SERIAL_GENERIC_16X5X
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
        }
        description "
           The se77x9 target provides the packages needed to run
           eCos on a Hitachi Solution Engine 77x9 board."
}

target se7751 {
        alias       { "Hitachi SE7751 board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH4
                      CYGPKG_HAL_SH_SH7751_SE7751
                      CYGPKG_IO_PCI
                      CYGPKG_DEVS_FLASH_SH_SE7751
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVS_ETH_SH_SE7751
                      CYGPKG_DEVS_ETH_AMD_PCNET
        }
        description "
           The se7751 target provides the packages needed to run
           eCos on a Hitachi Solution Engine 7751 board."
}

target dreamcast {
        alias { "SEGA Dreamcast" dreamcast }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH4
                   CYGPKG_HAL_SH_SH7750_DREAMCAST
                   CYGPKG_IO_PCI
		   CYGPKG_DEVS_ETH_RLTK_8139
	           CYGPKG_DEVS_ETH_SH_DREAMCAST_RLTK8139
                   CYGPKG_IO_SERIAL_SH_SCIF }
        description "
           The sh7750 target provides the packages needed to run
           eCos on SEGA Dreamcast."
}

target sh4_202_md {
        alias       { "SuperH SH4-202 MicroDev CPU board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH4
                      CYGPKG_HAL_SH_SH4_202_MD
                      CYGPKG_DEVS_FLASH_STRATA
                      CYGPKG_DEVS_FLASH_SH_MICRODEV
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_IO_SERIAL_SH_SH4_202_MD
                      CYGPKG_DEVS_ETH_SH_MICRODEV
                      CYGPKG_DEVS_ETH_SMSC_LAN91CXX
        }
        description "
           The sh4_202_md target provides the packages needed to run
           eCos on a SuperH SH4-202 MicroDev CPU board."
}

# --------------------------------------------------------------------------
# i386 targets
target pc_i82559 {
        alias		{ "i386 PC target with i82559 ethernet" pc }
	packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
			  CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
	                  CYGPKG_IO_SERIAL_I386_PC
			  CYGPKG_DEVS_ETH_INTEL_I82559
			  CYGPKG_DEVS_ETH_I386_PC_I82559
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
    	    The pc_i82559 target provides the 
    	    packages needed to run eCos binaries on a standard i386
    	    PC motherboard with an Intel 82559 based ethernet interface."
}

target pc_i82544 {
        alias		{ "i386 PC target with i82544 gigabit ethernet" pc_giga }
	packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
			  CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
	                  CYGPKG_IO_SERIAL_I386_PC
			  CYGPKG_DEVS_ETH_INTEL_I82544
			  CYGPKG_DEVS_ETH_I386_PC_I82544
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
    	    The pc_i82544 target provides the packages needed to run eCos binaries
            on a standard i386 PC motherboard with an Intel 82543/82544 based
            gigabit ethernet interface."
}

target pc_vmWare {
        alias		{ "i386 PC target (vmWare)" }
	packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
			  CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
	                  CYGPKG_IO_SERIAL_I386_PC
			  CYGPKG_DEVS_ETH_AMD_LANCEPCI
			  CYGPKG_DEVS_ETH_I386_PC_LANCEPCI
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
    	    The pc_vmWare target provides the packages needed to run eCos binaries
            on a standard i386 PC under wmWare."
}

# --------------------------------------------------------------------------
# Synthetic targets.
target linux {
        alias		{ "Linux synthetic target" i386linux }
	packages        { CYGPKG_HAL_SYNTH
                          CYGPKG_HAL_SYNTH_I386
                          CYGPKG_DEVS_FLASH_SYNTH
                          CYGPKG_DEVS_ETH_ECOSYNTH
                          CYGPKG_DEVS_WATCHDOG_SYNTH
                          CYGPKG_DEVS_WALLCLOCK_SYNTH      
        }
        description "
    	    The linux target provides the 
    	    packages needed to run eCos binaries on top of the i386
    	    Linux kernel."
}

# --------------------------------------------------------------------------
# SPARClite targets

target sleb {
	alias		{ "Fujitsu MB86800-MA01 board" }
	packages        { CYGPKG_HAL_SPARCLITE
                          CYGPKG_HAL_SPARCLITE_SLEB
	                  CYGPKG_IO_SERIAL_SPARCLITE_SLEB
        }
        description "
    	    The sleb target provides the packages need to run eCos
            on a Fujitsu MB86800-MA01 board."
}

target sparclite_sim {
	alias		{ "SPARClite simulator" sl_sim sparcl_sim }
	packages        { CYGPKG_HAL_SPARCLITE 
                          CYGPKG_HAL_SPARCLITE_SIM
        }
        description "
    	    The sparclite_sim target provides the packages need to run eCos
            on the SPARClite simulator."
}

# --------------------------------------------------------------------------
# SPARC V7/V8 targets

target sparc_erc32 {
	alias		{ "ERC32 processor" erc32 }
	packages        { CYGPKG_HAL_SPARC 
                          CYGPKG_HAL_SPARC_ERC32
        }
        description "
    	    The sparc_erc32 target provides the packages need to run eCos
            on the ERC32 processor or TSIM/ERC32 simulator."
}

target sparc_leon {
	alias		{ "LEON processor" leon }
	packages        { CYGPKG_HAL_SPARC 
                          CYGPKG_HAL_SPARC_LEON
        }
        description "
    	    The sparc_leon target provides the packages need to run eCos
            on the LEON processor or TSIM/LEON simulator."
}

# --------------------------------------------------------------------------
# PowerPC targets
target cme555 {
        alias           { "Axiom's CME555 board" cme555 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC5xx
                          CYGPKG_HAL_POWERPC_CME555
                          CYGPKG_DEVS_FLASH_CME555
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_POWERPC_CME555
                          CYGPKG_DEVICES_WALLCLOCK_MPC5xx
        }
        description "
            The cme555 target provides the packages needed to run
            eCos on a CME555 MPC555 evaluation board from Axiom
            Manufacturing."
}

target ec555 {
        alias           { "Wuerz ec555" ec555 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC5xx
                          CYGPKG_HAL_POWERPC_EC555
                          CYGPKG_DEVS_FLASH_EC555
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_POWERPC_EC555
                          CYGPKG_DEVICES_WALLCLOCK_MPC5xx
        }
        description "
            The ec555 target provides the packages needed to run
            eCos on a EC555 MPC555 development board from Wuerz
            elektronik."
}

target cma28x {
        alias		{ "Cogent CMA286/287 board" cma286 cma287 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx 
                          CYGPKG_HAL_POWERPC_COGENT
                          CYGPKG_IO_SERIAL_POWERPC_COGENT
        }
        description "
            The cma28x target provides the packages needed to run
            eCos on a Cogent CMA286 or CMA287 board."
}

target fads {
        alias		{ "Motorola MPC8xxFADS board" }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx 
                          CYGPKG_HAL_POWERPC_FADS
        }
        description "
            The fads target provides the packages needed to run
            eCos on a Motorola MPC8xxFADS board."
}

target mbx {
        alias		{ "Motorola MBX860/821 board" mbx860 mbx821 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_MBX
                          CYGPKG_HAL_QUICC 
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
                          CYGPKG_DEVS_ETH_POWERPC_QUICC
                          CYGPKG_DEVS_ETH_POWERPC_MBX
                          CYGPKG_DEVS_FLASH_MBX
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
            The mbx target provides the packages needed to run
            eCos on a Motorola MBX860 or MBX821 board."
}

target ts6 {
        alias		{ "Delphi TigerSHARC-6 board" Pleiades sixpack }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8260
                          CYGPKG_HAL_POWERPC_TS6
                          CYGPKG_DEVS_ETH_POWERPC_QUICC2
                          CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
                          CYGPKG_DEVS_FLASH_TS6
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
        }
        description "
            The ts6 target provides the packages needed to run
            eCos on a Delphi TigerSHARC-6 board."
}

target vads {
        alias		{ "Motorola MPC8260 VADS board" }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8260
                          CYGPKG_HAL_POWERPC_VADS
                          CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
                          CYGPKG_DEVS_ETH_POWERPC_QUICC2
                          CYGPKG_DEVS_FLASH_VADS
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
        }
        description "
            The vads target provides the packages needed to run
            eCos on a Motorola MPC8260 VADS board."
}

target viper {
        alias		{ "A&M Viper PPC860 board" viper860 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_VIPER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_VIPER
                          CYGPKG_DEVS_FLASH_VIPER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
            The viper target provides the packages needed to run
            eCos on a A&M Viper PPC860 board."
}

target psim {
	alias		{ "PowerPC simulator" ppc_sim powerpc_sim }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC60x
                          CYGPKG_HAL_POWERPC_SIM
        }
        description "
            The psim target provides the packages needed to run
            eCos in the PSIM simulator."
}

##-------------------------------------------------------------------------------------------
## Cogent CSB281 (PowerPC 8245) packages
##
package CYGPKG_HAL_POWERPC_CSB281 {
	alias		{ "Cogent PowerPC 8245 board" hal_powerpc_csb281 }
	directory	hal/powerpc/csb281
	script		hal_powerpc_csb281.cdl
	hardware
        description "
            The CSB281 HAL package provides the support needed to run
            eCos on a Cogent PowerPC 8245 board."
}

package CYGPKG_DEVS_FLASH_CSB281 {
	alias 		{ "FLASH memory support for Cogent PowerPC 8245 board" flash_csb281 }
	directory	devs/flash/powerpc/csb281
	script		flash_csb281.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Cogent CSB281 (PowerPC 8245) board."
}

package CYGPKG_DEVS_ETH_CSB281 {
	alias 		{ "Cogent CSB281 (PowerPC 8245) 82559 ethernet driver"
			   devs_eth_csb281 }
	hardware
	directory	devs/eth/powerpc/csb281
	script		csb281_eth_drivers.cdl
        description     "Ethernet driver for Cogent CSB281 (PowerPC 8245)
                         with Intel i82559 ethernet interfaces."
}

target csb281 {
	alias		{ "Cogent PowerPC 8245" cogent8245 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC60x
                          CYGPKG_HAL_POWERPC_CSB281
                          CYGPKG_DEVS_FLASH_STRATA
                          CYGPKG_DEVS_FLASH_CSB281
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_CSB281
                          CYGPKG_DEVS_ETH_INTEL_I82559
        }
        description "
            The csb281 target provides the packages needed to run
            eCos on the Cogent CSB281 (8245) board."
}
##-------------------------------------------------------------------------------------------

# --------------------------------------------------------------------------
# MIPS targets

target jmr3904 {
        alias		{ "Toshiba JMR-TX3904 board" jmr tx39 }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX39
                          CYGPKG_HAL_MIPS_TX39_JMR3904
	                  CYGPKG_IO_SERIAL_TX39_JMR3904
        }
        description "
           The jmr3904 target provides the packages needed to run
           eCos on a Toshiba JMR-TX3904 board. This target can also
           be used when running in the full simulator, since the simulator provides an
           accurate simulation of the hardware including I/O devices.
           To use the simulator in this mode the command
           `target sim --board=jmr3904' should be used from inside gdb."
}

target atlas_mips32_4kc {
        alias		{ "MIPS Atlas board with Mips32 4Kc processor" atlas_mips32_4kc }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS32
                          CYGPKG_HAL_MIPS_ATLAS
                          CYGPKG_IO_SERIAL_MIPS_ATLAS
                          CYGPKG_DEVS_FLASH_ATLAS
                          CYGPKG_DEVS_ETH_MIPS_ATLAS
                          CYGPKG_IO_PCI
        }
    set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
        description "
           The atlas_mips32_4Kc target provides the packages needed to run
           eCos on a MIPS Atlas board with a Mips32 4Kc processor."
}

target atlas_mips64_5kc {
        alias		{ "MIPS Atlas board with Mips64 5Kc processor" atlas_mips64_5kc ruby }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS64
                          CYGPKG_HAL_MIPS_ATLAS
                          CYGPKG_IO_SERIAL_MIPS_ATLAS
                          CYGPKG_DEVS_FLASH_ATLAS
                          CYGPKG_DEVS_ETH_MIPS_ATLAS
        }
    set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
        description "
           The atlas_mips32_5Kc target provides the packages needed to run
           eCos on a MIPS Atlas board with a Mips64 5Kc processor."
}
target malta_mips32_4kc {
        alias		{ "MIPS Malta board with Mips32 4Kc processor" malta_mips32_4kc }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS32
                          CYGPKG_HAL_MIPS_MALTA
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
                          CYGPKG_DEVS_FLASH_MALTA
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_AMD_PCNET
                          CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
        }
        set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
        description "
           The malta_mips32_4Kc target provides the packages needed to run
           eCos on a MIPS Malta board with a Mips32 4Kc processor."
}

target malta_mips64_5kc {
        alias		{ "MIPS Malta board with Mips64 5Kc processor" malta_mips64_5kc }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS64
                          CYGPKG_HAL_MIPS_MALTA
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
                          CYGPKG_DEVS_FLASH_MALTA
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_AMD_PCNET
                          CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
        }
        set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
        description "
           The malta_mips64_5Kc target provides the packages needed to run
           eCos on a MIPS Malta board with a Mips64 5Kc processor."
}
target tx39_sim {
        alias		{ "TX39 minimal simulator" }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX39
                          CYGPKG_HAL_MIPS_SIM
        }
        description "
           The tx39_sim target provides the packages needed to run
           eCos in the TX39 minimal simulator. To use this minimal
           simulator the command `target sim --board=jmr3904pal'
           should be used from inside gdb. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}
target ref4955 {
        alias		{ "Toshiba TX4955 reference platform" tx49 }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX49
                          CYGPKG_HAL_MIPS_TX49_REF4955
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_MIPS_REF4955
                          CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742
        }
        description "
           The ref4955 target provides the packages needed to run
           eCos on a Toshiba TX4955 reference platform."
}

target ocelot {
        alias		{ "PMC-Sierra Ocelot platform" ocelot }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_RM7000
                          CYGPKG_HAL_MIPS_RM7000_OCELOT
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_FLASH_MIPS_OCELOT
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_DEVS_ETH_INTEL_I82559
                          CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT
        }
        description "
           The ocelot target provides the packages needed to run
           eCos on a PMC-Sierra Ocelot Hot-Swap Computer."
}

target vrc4373 {
        alias		{ "NEC VRC4373 board" }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_VR4300
                          CYGPKG_HAL_MIPS_VR4300_VRC4373
                          CYGPKG_HAL_MIPS_VR4300_VRC437X
	                  CYGPKG_IO_SERIAL_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_MIPS_VRC437X
			  CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
			  CYGPKG_IO_PCI
        }
        description "
           The vrc4373 target provides the packages needed to run
           eCos on an NEC VRC4373 board."
}
target vrc4375 {
        alias		{ "NEC VRC4375 board" }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_VR4300
                          CYGPKG_HAL_MIPS_VR4300_VRC4375
                          CYGPKG_HAL_MIPS_VR4300_VRC437X
	                  CYGPKG_IO_SERIAL_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_MIPS_VRC437X
			  CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_PCI
			  CYGPKG_DEVS_ETH_INTEL_I21143
			  CYGPKG_DEVS_ETH_MIPS_VRC4375
        }
        description "
           The vrc4375 target provides the packages needed to run
           eCos on an NEC VRC4375 board."
}

target refidt334 {
        alias		{ "MIPS IDT79S334A reference platform" idt32334 }
	packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_IDT32334
                          CYGPKG_HAL_MIPS_IDT32334_REFIDT334
                          CYGPKG_IO_PCI
			  CYGPKG_DEVS_ETH_INTEL_I82559
			  CYGPKG_DEVS_ETH_MIPS_REFIDT334
			  CYGPKG_DEVS_FLASH_MIPS_REFIDT334
			  CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
			  CYGPKG_IO_SERIAL_MIPS_IDT79S334A
        }
        description "
           The refidt334 target provides the packages needed to run
           eCos on a MIPS IDT IDT79S334A reference board."
}

# --------------------------------------------------------------------------
# MN10300 targets

target am31_sim {
        alias		{ "MN10300 AM31 minimal simulator" }
	packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM31
                          CYGPKG_HAL_MN10300_AM31_SIM
        }
        description "
           The am31_sim target provides the packages need to run
           eCos in the MN10300 minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target stdeval1 {
        alias		{ "Matsushita stdeval1 board" }
	packages        { CYGPKG_HAL_MN10300 
                          CYGPKG_HAL_MN10300_AM31_STDEVAL1 
                          CYGPKG_HAL_MN10300_AM31 
                          CYGPKG_IO_SERIAL_MN10300
                          CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
        }
        description "
           The stdeval1 target provides the packages needed to run
           eCos on a Matsushita stdeval1 board. This target can also
           be used when running in the full simulator, since the simulator provides an
           accurate simulation of the hardware including I/O devices."
}
target stb {
        alias		{ "Matsushita STB board" }
	packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_STB
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_IO_SERIAL_MN10300
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_STB
                          CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
        }
        description "
           The stb target provides the packages needed to run
           eCos on a Matsushita STB board."
}

target asb {
        alias		{ "Matsushita ASB2303 board" }
	packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_ASB
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_ASB2303
        }
        description "
           The asb target provides the packages needed to run
           eCos on a Matsushita ASB2303 board."
}

target asb2305 {
        alias		{ "Matsushita ASB2305 board" }
	packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_ASB2305
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_ASB2305
        }
        description "
           The asb2305 target provides the packages needed to run
           eCos on a Matsushita ASB2305 board."
}

# --------------------------------------------------------------------------
# NEC targets

target ceb_v850 {
	alias { "Cosmo CEB-V850 board" CEB ceb_v850_sa1 }
	packages { CYGPKG_HAL_V85X
                   CYGPKG_HAL_V85X_V850
                   CYGPKG_HAL_V85X_V850_CEB
                   CYGPKG_IO_SERIAL_V85X_V850
        }
        description "
The ceb_v850 target provides the packages needed to run eCos on a
Cosmo CEB-V850 evaluation board fitted with a NEC V850/SA1 or NEC V850/SB1."
}

# --------------------------------------------------------------------------
# m68k targets

target mcf5272c3 {
    alias { "Motorola mcf5272c3 evaluation board" }
	packages {
        CYGPKG_HAL_M68K
        CYGPKG_HAL_M68K_MCF52xx
        CYGPKG_HAL_M68K_MCF52xx_MCF5272
        CYGPKG_HAL_M68K_MCF52xx_MCF5272_MCF5272C3
        CYGPKG_DEVS_ETH_MCF5272
        CYGPKG_IO_SERIAL_MCF5272_UART
    }

    description   "The mcf5272c3 target provides  the packages  needed to  run
                eCos on the Motorola mcf5272c3 evaluation board."

}
 
# --------------------------------------------------------------------------

# --------------------------------------------------------------------------
# H8 targets

target h8300h_sim {
        alias		{ "H8/300H minimal simulator" }
	packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_SIM
                          CYGPKG_IO_SERIAL_H8300_SCI
        }
        description "
           The h8300h_sim target provides the packages need to run
           eCos in the H8/300H minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target h8s_sim {
        alias		{ "H8S minimal simulator" }
	packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8S
                          CYGPKG_HAL_H8300_H8S_SIM
                          CYGPKG_IO_SERIAL_H8300_SCI
        }
        description "
           The h8300h_sim target provides the packages need to run
           eCos in the H8/300H minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target aki3068net {
        alias		{ "Akizuki H8/3068 Network board" }
	packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_AKI3068NET
                          CYGPKG_IO_SERIAL_H8300_SCI
			  CYGPKG_DEVS_ETH_H8300_AKI3068NET
                          CYGPKG_DEVICES_WATCHDOG_H8300_H8300H
        }
        description "
           The aki3068net target provides the packages need to run
           eCos in the Akizuki H8/3068 Network board."
}

target h8max {
        alias		{ "H8MAX" }
	packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_H8MAX
                          CYGPKG_IO_SERIAL_H8300_SCI
			  CYGPKG_DEVS_ETH_H8300_H8MAX
                          CYGPKG_DEVICES_WATCHDOG_H8300_H8300H
        }
        description "
           The h8max target provides the packages need to run
           eCos in the strawberry-linux.com H8MAX board."
}

target edosk2674 {
        alias		{ "EDOSK-2674" }
	packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8S
                          CYGPKG_HAL_H8300_H8S_EDOSK2674
                          CYGPKG_IO_SERIAL_H8300_SCI
			  CYGPKG_DEVS_ETH_H8300_EDOSK2674
        }
        description "
           The h8max target provides the packages need to run
           eCos in the Hitachi Micro System Europe EDOSK-2674 Evalution board."
}

# --------------------------------------------------------------------------
# CalmRISC16 targets

target calm16_ceb {
        alias		{ "CalmRISC16 Core Eval Board" }
	packages        { CYGPKG_HAL_CALM16
                          CYGPKG_HAL_CALM16_CORE
                          CYGPKG_HAL_CALM16_CEB
        }
        description "
           The calm16_ceb target provides the packages needed to run
           eCos on the CalmRISC16 Core Evaluation Board."
}
# --------------------------------------------------------------------------
# CalmRISC32 targets

target calm32_ceb {
        alias		{ "CalmRISC32 Core Eval Board" }
	packages        { CYGPKG_HAL_CALM32
                          CYGPKG_HAL_CALM32_CORE
                          CYGPKG_HAL_CALM32_CEB
        }
        description "
           The calm32_ceb target provides the packages needed to run
           eCos on the CalmRISC32 Core Evaluation Board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_TS1000 {
	alias		{ "Allied Telesyn TS1000 board" hal_powerpc_ts1000 }
	directory	hal/powerpc/ts1000
	script		hal_powerpc_ts1000.cdl
	hardware
        description "
            The TS1000 HAL package provides the support needed to run
            eCos on a Allied Telesyn TS1000 board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_FLASH_POWERPC_TS1000 {
	alias 		{ "FLASH memory support for Allied Telesyn TS1000 (PPC855) board" flash_ts1000 }
	directory	devs/flash/powerpc/ts1000
	script		flash_ts1000.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the Allied Telesyn TS1000 (PPC855) platform."
}

package CYGPKG_DEVS_ETH_POWERPC_TS1000 {
	alias 		{ "Allied Telesyn TS1000 ethernet driver" ts1000_eth_driver }
	hardware
	directory	devs/eth/powerpc/ts1000
	script		ts1000_eth_drivers.cdl
        description     "Ethernet driver specifics for Allied Telesyn TS1000 (MPC855T) based boards."
}

target ts1000 {
        alias		{ "Allied Telesyn TS1000 board" ts1000_855 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_TS1000
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_POWERPC_TS1000
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_TS1000
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        description "
            The ts1000 target provides the packages needed to run
            eCos on a Allied Telesyn TS1000 (PPC855T) board."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_FLASH_UE250 {
	alias 		{ "FLASH memory support for uE250" flash_uE250 }
	directory	devs/flash/arm/uE250
	script		flash_uE250.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the uE250 platform."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_UE250 {
	alias 		{ "NMI uE250 PCI ethernet driver" devs_eth_arm_ue250 }
	hardware
	directory	devs/eth/arm/uE250
	script		uE250_eth_drivers.cdl
        description     "Ethernet driver for NMI uE250 via PCI card."
}

package CYGPKG_HAL_ARM_XSCALE_UE250 {
	alias		{ "NMI uEngine uE250" hal_arm_xscale_uE250 }
	directory	hal/arm/xscale/uE250
	script		hal_arm_xscale_uE250.cdl
	hardware
        description "
        The UE250 HAL package provides the support needed to run
        eCos on an NMI uEngine u250 board."
}

target uE250 {
	alias { "NMI uEngine uE250 Board" uE250 ue250 }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_PXA2X0
                   CYGPKG_HAL_ARM_XSCALE_UE250
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_UE250
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_ETH_ARM_XSCALE_UE250
        }
        description "
        The uE250 target provides the packages needed to run
        eCos on an NMI uEngine uE250 board."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_FLASH_PICASSO {
	alias 		{ "FLASH memory support for picasso" flash_picasso }
	directory	devs/flash/arm/picasso
	script		flash_picasso.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the picasso platform."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_PICASSO {
	alias 		{ "NMI picasso PCI ethernet driver" devs_eth_arm_picasso }
	hardware
	directory	devs/eth/arm/picasso
	script		picasso_eth_drivers.cdl
        description     "Ethernet driver for NMI picasso via PCI card."
}

package CYGPKG_HAL_ARM_XSCALE_PICASSO {
	alias		{ "NMI uEngine picasso" hal_arm_xscale_picasso }
	directory	hal/arm/xscale/picasso
	script		hal_arm_xscale_picasso.cdl
	hardware
        description "
        The PICASSO HAL package provides the support needed to run
        eCos on an NMI uEngine u250 board."
}

target picasso {
	alias { "NMI uEngine picasso Board" picasso picasso }
	packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_PXA2X0
                   CYGPKG_HAL_ARM_XSCALE_PICASSO
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_PICASSO
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_ETH_ARM_XSCALE_PICASSO
        }
        description "
        The picasso target provides the packages needed to run
        eCos on an NMI uEngine picasso board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_ADDER {
	alias		{ "A&M Adder PPC85x board" hal_powerpc_adder powerpc_adder_hal }
	directory	hal/powerpc/adder
	script		hal_powerpc_adder.cdl
	hardware
        description "
            The ADDER HAL package provides the support needed to run
            eCos on a A&M ADDER board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_FLASH_POWERPC_ADDER {
	alias 		{ "FLASH memory support for A&M Adder PowerPC/85x" flash_adder }
	directory	devs/flash/powerpc/adder
	script		flash_adder.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the A&M PowerPC/8xx ADDER platforms."
}

package CYGPKG_DEVS_ETH_POWERPC_ADDER {
	alias 		{ "A&M Adder ethernet driver" adder_eth_driver }
	hardware
	directory	devs/eth/powerpc/adder
	script		adder_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Adder (MPC85x) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_ADDERII {
        alias           { "A&M AdderII ethernet driver" adderII_eth_driver }
        hardware
        directory       devs/eth/powerpc/adderII
        script          adderII_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M AdderII (MPC852T) based boards."
}

target adder {
        alias		{ "A&M Adder PPC850 board" adder850 }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_ADDER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_POWERPC_ADDER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_QUICC
                          CYGPKG_DEVS_ETH_POWERPC_ADDER
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        enable { CYGHWR_HAL_POWERPC_ADDER_I }
        description "
            The adder target provides the packages needed to run
            eCos on a A&M Adder PPC850 board."
}

target adderII {
        alias		{ "A&M Adder PPC852T board" adder852T }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_ADDER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_POWERPC_ADDER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_ADDERII
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        enable { CYGHWR_HAL_POWERPC_ADDER_II }
        description "
            The adderII target provides the packages needed to run
            eCos on a A&M Adder PPC852T board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_RATTLER {
	alias		{ "A&M Rattler MPC8250 board" hal_powerpc_rattler powerpc_rattler_hal }
	directory	hal/powerpc/rattler
	script		hal_powerpc_rattler.cdl
	hardware
        description "
            The RATTLER HAL package provides the support needed to run
            eCos on a A&M RATTLER board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_ETH_POWERPC_RATTLER {
        alias           { "A&M Rattler ethernet driver" rattler_eth_driver }
        hardware
        directory       devs/eth/powerpc/rattler
        script          rattler_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Rattler (MPC8250) based boards."
}

package CYGPKG_DEVS_FLASH_POWERPC_RATTLER {
	alias 		{ "FLASH memory support for A&M Rattler (MPC8250)" flash_rattler }
	directory	devs/flash/powerpc/rattler
	script		flash_rattler.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the A&M Rattler (MPC8250) platforms."
}

target rattler {
        alias		{ "A&M Rattler (8250) board" }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8XXX
                          CYGPKG_HAL_POWERPC_RATTLER
                          CYGPKG_DEVS_FLASH_POWERPC_RATTLER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_FCC
                          CYGPKG_DEVS_ETH_POWERPC_RATTLER
                          CYGPKG_DEVS_ETH_PHY
                          CYGPKG_IO_SERIAL_POWERPC_MPC8XXX
        }
        description "
            The rattler target provides the packages needed to run
            eCos on an Analogue & Micro Rattler (MPC8250) board."
}

##-------------------------------------------------------------------------------------------
## TAMS MOAB (PowerPC 405GPr) packages
##
package CYGPKG_HAL_POWERPC_MOAB {
	alias		{ "TAMS PowerPC 405GP board" hal_powerpc_moab }
	directory	hal/powerpc/moab
	script		hal_powerpc_moab.cdl
	hardware
        description "
            The MOAB HAL package provides the support needed to run
            eCos on a TAMS PowerPC 405GP board."
}

package CYGPKG_DEVS_FLASH_POWERPC_MOAB {
	alias 		{ "FLASH memory support for MOAB" flash_moab }
	directory	devs/flash/powerpc/moab
	script		flash_moab.cdl
	hardware
        description "
           This package contains hardware support for both the boot FLASH 
           and NAND (main) memory on the MOAB platform."
}

package CYGPKG_DEVS_ETH_POWERPC_MOAB {
        alias           { "TAMS PowerPC 405GP ethernet support" moab_eth_driver }
        hardware
        directory       devs/eth/powerpc/moab
        script          moab_eth_drivers.cdl
        description     "Ethernet driver specifics for TAMS MOAB (PPC405GP) based boards."
}

package CYGPKG_DEVICES_WALLCLOCK_POWERPC_MOAB {
         alias          { "MOAB RTC device" devs_wallclock_moab_ds1307 moab_rtc }
         hardware
         directory      devs/wallclock/powerpc/moab
         script         moab_wallclock_drivers.cdl
         description    "
            RTC driver for MOAB (PowerPC PPC405GPr) using a
            Dallas DS1307 RTC."
}

target moab {
	alias		{ "TAMS PowerPC 405GPr" moab405GPr }
	packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC40x
                          CYGPKG_HAL_POWERPC_MOAB
                          CYGPKG_DEVS_FLASH_POWERPC_MOAB
                          CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                          CYGPKG_DEVS_FLASH_TOSHIBA_TC58XXX
                          CYGPKG_DEVS_ETH_POWERPC_MOAB
                          CYGPKG_DEVS_ETH_POWERPC_PPC405
                          CYGPKG_DEVS_ETH_NS_DP83816
                          CYGPKG_DEVS_ETH_PHY
                          CYGPKG_IO_PCI
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307
                          CYGPKG_DEVICES_WALLCLOCK_POWERPC_MOAB
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_POWERPC_PPC405
        }
        description "
            The moab target provides the packages needed to run
            eCos on the TAMS MOAB (405GPr) board."
}
##-------------------------------------------------------------------------------------------

# --------------------------------------------------------------------------

# Realtek 8139 (PCI) Ethernet driver
package CYGPKG_DEVS_ETH_RLTK_8139 {
	alias 		{ "Realtek 8139 ethernet driver" rltk8139_eth_driver }
	hardware
	directory	devs/eth/rltk/8139
	script		rltk_8139_eth_drivers.cdl
        description     "Ethernet driver for Realtek 8139 (PCI) card."
}

package CYGPKG_DEVS_ETH_I386_PC_RLTK8139 {
	alias 		{ "Intel PC with Realtek 8139 ethernet driver" pc_rltk8139_eth_driver }
	hardware
	directory	devs/eth/i386/pc/rltk8139
	script		i386_pc_rltk8139_eth_drivers.cdl
        description     "Intel PC using Realtek 8139 (PCI) card."
}

package CYGPKG_DEVS_ETH_SH_DREAMCAST_RLTK8139 {
	alias 		{ "SEGA Dreamcast with BroadBandAdapter driver" dreamcast_rltk8139_eth_driver }
	hardware
	directory	devs/eth/sh/dreamcast
	script		sh_dreamcast_rltk8139_eth_drivers.cdl
        description     "SEGA Dreamcast with BroadBandAdapter."
}

target pc_rltk8139 {
        alias		{ "i386 PC target with RTL8139 ethernet" }
	packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
			  CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
	                  CYGPKG_IO_SERIAL_I386_PC
			  CYGPKG_DEVS_ETH_RLTK_8139
			  CYGPKG_DEVS_ETH_I386_PC_RLTK8139
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
    	    The pc_rltk8139 target provides the packages needed to run eCos binaries 
            on a standard i386 PC motherboard, using a Realtek 8139 network card."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_ARM_GPS4020 {
	alias		{ "GPS4020" hal_gps4020 }
	directory	hal/arm/gps4020
	script		hal_arm_gps4020.cdl
	hardware
        description "
            The GPS4020 HAL package provides the support needed to run
            eCos on a GPS 4020 board using the Firefly MF1 (ARM) processor."
}

package CYGPKG_DEVS_FLASH_GPS4020 {
	alias 		{ "FLASH memory support for GPS4020" flash_gps4020 }
	directory	devs/flash/arm/gps4020
	script		flash_gps4020.cdl
	hardware
        description "
           This package contains hardware support for FLASH memory
	   on the GPS4020 platform."
}

package CYGPKG_IO_SERIAL_ARM_GPS4020 {
    alias             { "GPS4020 serial device drivers"
                        devs_serial_arm_gps4020 gps4020_serial_driver }
    hardware
    directory	      devs/serial/arm/gps4020
    script	      ser_arm_gps4020.cdl	
    description       "GPS4020 serial device drivers"
}

target gps4020 {
        alias		{ "GPS 4020" gps_4020 gps}
	packages        { CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_GPS4020
                          CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                          CYGPKG_DEVS_FLASH_GPS4020
                          CYGPKG_IO_SERIAL_ARM_GPS4020
        }
        description "
            The gps4020 target provides the packages needed to run
            eCos on a GPS-4020 board."
}

# --------------------------------------------------------------------------

package CYGPKG_VNC_SERVER {
    alias       { "VNC server" vnc_server }
    directory   net/vnc_server
    script      vnc-server.cdl
    description "VNC server."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_DISK_V85X_EDB_V850 {
    alias           { "Elatec v850 development board disk driver" edb_v850_disk }
    directory       devs/disk/v85x/edb_v850
    script          v85x_edb_v850_disk.cdl
    hardware
    description     "Disk driver for the Elatec v850 development board." 
}

package CYGPKG_DEVS_DISK_ECOSYNTH {
    alias           { "Synthetic target disk driver" ecosynthdisk ecosynth_disk_driver }
    directory       devs/disk/synth
    script          synthdisk.cdl
    hardware
    description     "Disk driver for the synthetic target."
}

package CYGPKG_IO_DISK {
    alias           { "Disk device drivers" disk io_disk }
    directory       io/disk
    script          io_disk.cdl
    description "
        This package contains drivers for basic I/O services on
        disk devices."
}

package CYGPKG_BLOCK_LIB {
    alias       { "Block cache and access library" blib block_lib }
    directory   services/blib
    script      blib.cdl
    description "
        This package contains the block cache and access library."
}

package CYGPKG_FS_FAT {
    alias       { "FAT Filesystem" fatfs fat_fs fs_fat }
    directory   fs/fat
    script      fatfs.cdl
    description "
        This package contains a FAT filesystem implementation."
}


# --------------------------------------------------------------------------

package CYGPKG_NET_LWIP {
	alias		{"lwIP" lwip}
	directory	net/lwip_tcpip
	script		cdl/lwip_net.cdl
	description	"Lightweight TCP/IP stack: lwIP"
}