1998-10-24  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h: 
	Only define anything if we have the correct hardware platform and
	NOT a simulator target for that platform, as well as the device
	package itself being defined.

1998-10-23  Hugo Tyson  <hmt@cygnus.co.uk>

	* tests/mn10300_1_serial_test.cxx: 
	Move include of testing header above the check for "can we test".

	* tests/mn10300_2_serial_test.cxx: 
	Move include of testing header above the check for "can we test".
	Assign dummy to unused baud_rate to prevent warning; this keeps
	this test as similar as possible to the others.
	
Thu Oct 22 13:15:06 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* include/serial_mn10300_1.hxx, include/serial_mn10300_2.hxx
	* src/serial_mn10300_1.cxx, src/serial_mn10300_2.cxx
	Fix PR17883. 0 byte writes hang driver.

	* mn10300_1_serial_test.cxx, mn10300_2_serial_test.cxx
	Fix up some coding standard problems.

Wed Oct 21 17:50:04 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* mn10300_2_serial_out_blocking.cxx: Removed. It is no longer 
        pertinent.  All functionality is in mn10300_2_serial_write_blocking.cxx
        which is an internal test not to be sent out this release.

	* PKGconf.mak: Added two new API tests to build. 

	* mn10300_1_serial_test.cxx, mn10300_2_serial_test.cxx: Two new tests 
        that test just the API and not much of the functionality. These tests 
        meet or exceed the previous existence/spelling tests of the API and 
        therefore replace all the serial[x].cxx tests which were removed.

Tue Oct 20 15:54:43 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/PKGconf.mak: 
	Remove unnecessary override of PKGCONF_CXXFLAGS

Tue Oct 20 11:15:30 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* tests/PKGconf.mak: The defaul build should only build tests that
        can be run with the automated test infrastructure. I.E. None.

        * tests/README, tests/serial3.cxx, tests/serial4.cxx tests/serial5.cxx
        * tests/serial7.cxx, tests/set_baud_rate.cxx: Removed trash tests.
        Much better tests along with testing infrastructure are on the way.

1998-10-19  Jesper Skov  <jskov@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h: Undid 1998-10-16 change.

1998-10-16  Jesper Skov  <jskov@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h: Changed
	CYGPKG_HAL_MN10300_STDEVAL1 to CYG_HAL_MN10300_STDEVAL1.

Thu Oct 15 17:00:00 1998  John Dallaway  <jld@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h: Disable dependence on HAL in CDL.

Sun Sep 27 13:50:23 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/README: Added copyright blurb.

Sun Sep 27 10:30:53 1998  Jesper Skov  <jskov@cygnus.co.uk>

        PR 17505
	
	* src/serial_mn10300_1.cxx (get_baud_rate): Remove seemingly
	spurious mutex.unlock.

Fri Sep 25 20:59:46 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* tests/README: Added.

Fri Sep 25 19:58:38 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/serial_mn10300_2.hxx: Use same serial divisors for 9600,
	19200 and 38400 baud as CygMon.

Fri Sep 25 11:17:31 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/mn10300_2_get_baud_rate.cxx (entry0): Use a signed
 	variable to hold return value (baud_rate).

	* tests/serial6.cxx (entry1): Reduced delay.
	Added some diag info.
	Changed test numbers to match file.

	* tests/PKGconf.mak: Reintroduced input tests.

	* tests/serial3.c: 
	* tests/serial5.c: 
	Added some diag info to help identify these as input tests.

	* tests/serial3.c: 
	* tests/serial4.c: 
	* tests/serial5.c: 
	* tests/serial6.c: 
	Changed NULL-test condition to match default serial port
	configuration.
	
Wed Sep 23 14:34:22 1998  Jesper Skov  <jskov@cygnus.co.uk>
        PR 17424
	
	* src/serial_mn10300_1.cxx:
	* src/serial_mn10300_2.cxx:
	(io_write, io_read) Also do callbacks in poll-mode, if the pointer
 	is non-NULL.

Tue Sep 22 14:26:35 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>

	* include/serial_mn10300_2.hxx: Extended driver class name with
 	_2.

Thu Sep 17 13:01:21 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/pkgconf/serial_mn10300_1.h:
	* include/pkgconf/serial_mn10300_2.h:
	Protect CYG_DEVICE_SERIAL_RS232_MN10300_x_KMODE_INTERRUPT with
	CYGIMP_KERNEL_INTERRUPTS_DSRS.
	Protect CYG_DEVICE_SERIAL_RS232_MUTEX with CYGPKG_KERNEL.
	
	* include/pkgconf/serial_mn10300.h: Put some requires in CDL.

Thu Sep 17 09:46:03 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* tests/PKGconf.mak: Removed TESTS_IN and TESTS_OTHER since they
	fail.

Tue Sep 15 02:23:06 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* include/serial_mn10300_1.hxx, include/serial_mn10300_1.hxx,
	* src/serial_mn10300_1.cxx, src/serial_mn10300_2.cxx:
	Use positive macros instead of negative changing all
	...DO_NOT_DECLARE macros to ...DECLARE

1998-09-12  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h:
	Added missing descriptions (PR 17184)

Fri Sep 11 10:25:20 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* src/serial_mn10300_1.cxx (set_kmode): 
	* src/serial_mn10300_2.cxx (set_kmode): 
	Fixed Assertion.

	* include/serial_mn10300_2.hxx: 
	* include/serial_mn10300_1.hxx: 
	Use interrupt vectors defined by hal_intr.h.

Thu Sep 10 11:20:08 1998  Jesper Skov  <jskov@cygnus.co.uk>
        PR#17176

	* include/serial_mn10300_1.hxx: Removed conditionals around
	set_kmode.
	* src/serial_mn10300_1.cxx (io_read_cancel): Made to compile
	without KMODE_INTERRUPT.
	(set_kmode): Added dummy function for use when only one kmode is
	configured.

	* include/serial_mn10300_2.hxx: Removed conditionals around
	set_kmode.
	* src/serial_mn10300_2.cxx (io_read_cancel): Made to compile
	without KMODE_INTERRUPT.
	(set_kmode): Added dummy function for use when only one kmode is
	configured.

1998-09-04  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h:
	Fixed the parent definition for the package.

1998-09-03  Bart Veer  <bartv@cygnus.co.uk>

	* src/serial_mn10300_2.cxx: 
	* src/serial_mn10300_1.cxx: 
	* include/pkgconf/serial_mn10300.h:
	Provide minimal support for configuration data.

Thu Sep  3 15:58:13 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/pkgconf/serial_mn10300.h,
	  include/pkgconf/serial_mn10300_2.h: 
	Move these files here from devs/common/current/include/pkgconf/
	renaming serial_mn10300_1.h to serial_mn10300.h

Thu Sep  3 10:09:52 1998  Tim Goodwin  <tgoodwin@cygnus.co.uk>

	* tests/serial7.cxx:
	Comments claim this is test 2 and test 5!

Wed Sep  2 22:11:03 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/serial_mn10300.hxx, include/serial_mn10300_2.hxx:
	Rename serial_mn10300.hxx to serial_mn10300_2.hxx

	* include/serial_mn10300_2.hxx, src/serial_mn10300_2.cxx:
	Change all mentions of serial_mn10300.hxx to serial_mn10300_2.hxx
	including things in comments

Fri Aug 28 09:48:38 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* tests/mn10300_2_get_baud_rate.cxx,
	  tests/mn10300_2_serial_out_asynchronous.cxx,
	  tests/mn10300_2_serial_out_blocking.cxx, tests/serial3.cxx, 
	  tests/serial4.cxx, tests/serial5.cxx, tests/serial6.cxx,
	  tests/serial7.cxx, tests/set_baud_rate.cxx:
        Change use of main() as the entry point to cyg_start() under the
        new entry point scheme. Remove return codes as cyg_start() returns
        void, not int.

Wed Jul 29 17:48:58 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* include/serial_mn10300.hxx, src/serial_mn10300_2.cxx: 
	Support baudrates up to 460800

	* tests/PKGconf.mak, 
	* tests/get_baud_rate.cxx, tests/mn10300_2_get_baud_rate.cxx:
	Rename get_baud_rate.cxx to mn10300_2_get_baud_rate.cxx

Wed Jul 29 16:12:29 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* serial/rs232/mn10300/current/tests/PKGconf.mak:
	Add more tests.

	* tests/mn10300_2_serial_out_blocking.cxx: Use correct
	device macro for identifying declared device.

	* tests/mn10300_2_serial_out_asynchronous.cxx: Replaces
	old serial2.cxx test. Does a lot more testing too.

	* tests/serial1.cxx, tests/serial2.cxx: Remove old tests.
	
Wed Jul 29 13:38:27 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* serial/rs232/mn10300/current/tests/PKGconf.mak:
	Add more tests.
	
	* src/serial_mn10300_2.cxx: If interrupt mode is configured
	then make that the default mode. This is required to let
	devices work with the ROM monitor as the read isr needs to
	catch ^C when the kernel is running.

	* src/serial_mn10300_2.cxx: Fix interrupt mode to DTRT
	when a 0 buffer_length IORB is passed to io_write().

	* tests/mn10300_2_serial_out_blocking.cxx: Replaces old
	serial1.cxx test. Does a lot more testing too.

Tue Jul 28 21:19:17 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* tests/PKGconf.mak: Sort tests by device testing guidelines

	* tests/serial1.cxx: Update test to use CYGVAR_DEVICE_TEST_NAME
	Added small stress test and also test for setting of 
	xferred_length in returned IORB buffer.

	* tests/set_baud_rate.cxx: Some fixes to let it compile.

Mon Jul 27 23:39:57 BST 1998  Chris Provenzano  <proven@cygnus.com>

	* include/serial_mn10300.hxx:
	Remove CYG_DEVICE_..._KMODE_ASSERT configuration option.
        Selective linking will DTRT for this option.

	* tests/get_baud_rate.cxx, tests/serial2.cxx, tests/serial4.cxx,
	* tests/serial6.cxx, tests/serial7.cxx:
	Use macro device names instead of hardcoded names.

Mon Jul 27 17:33:59 BST 1998  Chris Provenzano  <proven@cygnus.com>

        * Changelog: Initial ChangeLog entry.


//===========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//===========================================================================