Mercurial > flash_v2

view packages/devs/serial/rs232/mn10300/current/include/serial_mn10300_1.hxx @ 0:3111d98ba7b3 ecos-v1_1-release

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Initial commit of eCos version 1.1
author jlarmour
date Tue, 11 May 1999 11:16:07 +0000
parents
children
line wrap: on
line source

#ifndef CYGONCE_DEVS_SERIAL_RS232_MN10300_SERIAL_MN10300_1_HXX
#define CYGONCE_DEVS_SERIAL_RS232_MN10300_SERIAL_MN10300_1_HXX

//==========================================================================
//
//	serial_mn10300_1.hxx
//
//	Header file for the mn10300 serial port #1
//
//==========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): 	proven
// Contributors:	proven
// Date:	1998-04-22
// Purpose:	Define Cyg_Device_Serial_mn10300_1 data structure
// Description:	This file contains the C++ class declaration of 
//		Cyg_Device_Serial_mn10300_1. There can be only one.
// Usage:	#include <cyg/devs/serial/rs232/mn10300/serial_mn10300_1.hxx>
//
//####DESCRIPTIONEND####
//
//==========================================================================

#include <pkgconf/devs.h>		// Device configureation file

#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1
// Include Configureation options specific to the device
#include CYG_DEVICE_SERIAL_RS232_MN10300_1	

#include <cyg/kernel/ktypes.h>
#include <cyg/infra/cyg_ass.h>         	// assertion macros
#include <cyg/infra/cyg_trac.h>        	// tracing macros

#include <cyg/kernel/intr.hxx>		// Cyg_ISR, Cyg_DSR
#include <cyg/kernel/sched.hxx>		// intr.hxx
#include <cyg/kernel/sched.inl>		// intr.hxx
#include <cyg/hal/hal_intr.h>		// vectors
#ifdef CYG_DEVICE_SERIAL_RS232_MUTEX
#include <cyg/kernel/mutex.hxx>
#endif
#include <cyg/devs/serial/rs232/common/rs232.hxx>

// -------------------------------------------------------------------------
// The mn10300 serial 1 device is CURRENTLY unique.

#ifdef CYG_DEVICE_INTERNAL
// Define the serial registers.
#define CYG_DEVICE_SERIAL_RS232_CR     ((volatile cyg_uint16 *)0x34000810)
#define CYG_DEVICE_SERIAL_RS232_ICR    ((volatile cyg_uint8 *) 0x34000814)
#define CYG_DEVICE_SERIAL_RS232_TXR    ((volatile cyg_uint8 *) 0x34000818)
#define CYG_DEVICE_SERIAL_RS232_RXR    ((volatile cyg_uint8 *) 0x34000819)

#define CYG_DEVICE_SERIAL_RS232_SR_ADDR     0x3400081c
#define CYG_DEVICE_SERIAL_RS232_SR_SIZE	    cyg_uint16
#define CYG_DEVICE_SERIAL_RS232_SR          \
  ((volatile CYG_DEVICE_SERIAL_RS232_SR_SIZE *) CYG_DEVICE_SERIAL_RS232_SR_ADDR)

// Timer 2 provides the baud rate divisor for serial 2 exclusivly
#define TIMER1_MD       ((volatile cyg_uint8 *)0x34001001)
#define TIMER1_BR       ((volatile cyg_uint8 *)0x34001011)
#define TIMER2_CR       ((volatile cyg_uint8 *)0x34001021)

#define PORT3_MD        ((volatile cyg_uint8 *)0x36008025)


#define CYG_DEVICE_SERIAL_RS232_TVEC   CYG_VECTOR_SERIAL_1_TX
#define CYG_DEVICE_SERIAL_RS232_RVEC   CYG_VECTOR_SERIAL_1_RX

// Here are the values for the timers to set the various baud rates
// Timer 1 is the 8 bit timer 1 register
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B0		  0
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B600		  0
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B1200		  0
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B2400		  0
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B4800		  0
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B9600		195
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B19200		 98
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B38400		 48
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B57600		 32
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B115200	 16
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B230400	  8
#define CYG_DEVICE_SERIAL_RS232_T1_VALUE_B460800	  4

// Timer 2 doesn't exist and is always 0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B0		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B600		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B1200		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B2400		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B4800		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B9600		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B19200		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B38400		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B57600		  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B115200	  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B230400	  0
#define CYG_DEVICE_SERIAL_RS232_T2_VALUE_B460800	  0

// Now set the default baudrate
#ifndef CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE
#error "Must specify a default baud rate"
#else
#if ((CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE > 0) && \
    (CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE < 9600))
#error "Baud rates less than 9600 are not supported for the mn10300 serial port 1 at this time"
#endif
#define CYG_DEVICE_SERIAL_RS232_DEFAULT_BAUD_RATE \
	CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE
#endif // CYG_DEVICE_SERIAL_RS232_MN10300_1_DEFAULT_BAUD_RATE

#include <cyg/devs/serial/rs232/common/baud.h>

#endif // CYG_DEVICE_INTERNAL

// -------------------------------------------------------------------------
// Cyg_Device_Serial_RS232_mn10300_1

#define CYG_CLASS_DEVICE_SERIAL_RS232_MN10300_1	Cyg_Device_Serial_RS232_mn10300_1

class CYG_CLASS_DEVICE_SERIAL_RS232_MN10300_1
    : public Cyg_Device_Serial_RS232
{
#ifdef CYG_DEVICE_INTERNAL
#include <cyg/devs/serial/rs232/common/rs232.ht>
#endif

private:
    /* Internal routines */
    cyg_int32 	io_read(Cyg_IORB * iorb);
    cyg_int32 	io_write(Cyg_IORB * iorb);
    void 	io_write_flush(void);

public:

    /* Constructor */
    CYG_CLASS_DEVICE_SERIAL_RS232_MN10300_1();

#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_KMODE_ASSERT
    cyg_int32 io_read_assert(Cyg_IORB * iorb);
    cyg_int32 io_write_assert(Cyg_IORB * iorb);
#endif 
 
    cyg_int32 io_read_cancel(Cyg_IORB * iorb);
    cyg_int32 io_write_cancel(Cyg_IORB * iorb);
    cyg_int32 io_read_blocking(Cyg_IORB * iorb);
    cyg_int32 io_write_blocking(Cyg_IORB * iorb);
    cyg_int32 io_read_asynchronous(Cyg_IORB * iorb);
    cyg_int32 io_write_asynchronous(Cyg_IORB * iorb);

    cyg_int32 set_kmode(cyg_uint32);
    cyg_int32 get_kmode(void);

    cyg_int32 set_baud_rate(cyg_uint32);
    cyg_int32 get_baud_rate(void);

    cyg_int32 set_line_mode(cyg_uint32);
    cyg_int32 get_line_mode(void);

#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_READ_MODES
    cyg_int32 set_read_mode(cyg_uint32);
    cyg_int32 set_read_data(cyg_uint32 /* mode */, const char * /* data */, cyg_uint32 /* count */);
#endif
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_WRITE_MODES
    cyg_int32 set_write_mode(cyg_uint32);
#endif
};

// Declare exported variables
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_NAME
#ifdef CYG_DEVICE_SERIAL_RS232_MN10300_1_DECLARE
extern CYG_CLASS_DEVICE_SERIAL_RS232_MN10300_1 CYG_DEVICE_SERIAL_RS232_MN10300_1_NAME;
#endif
#endif

#endif  // CYG_DEVICE_SERIAL_RS232_MN10300_1

#endif  // CYGONCE_DEVS_SERIAL_RS232_MN10300_SERIAL_MN10300_1_HXX
// End of serial_mn10300_1.hxx