# ====================================================================
#
#      ser_mn10300.cdl
#
#      eCos serial MN10300 configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  gthomas
# Contributors:
# Date:           1999-07-07
#
#####DESCRIPTIONEND####
#
# ====================================================================

# FIXME: Bad name
cdl_option CYGPKG_IO_SERIAL_MN10300_POLLED_MODE {
    display       "MN10300 polled mode serial drivers"
    flavor        bool
    default_value 0
    description   "
        If asserted, this option specifies that the serial device
        drivers for the MN10300 should be polled-mode instead of
        interrupt driven."
}

cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL0 {
    display       "MN10300 serial port 0 driver"
    flavor        bool
    default_value 0
    description   "
        This option includes the serial device driver for port 0 on the 
        MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL0_NAME {
        display       "Device name for MN10300 serial port 0"
        flavor        data
        default_value {"\"/dev/ser0\""}
        description   "
            This option specifies the device name port 0 on the MN10300."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BAUD {
        display       "Baud rate for the MN10300 serial port 0 driver"
        flavor        data
        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
                      4800 7200 9600 14400 19200 38400 57600 115200 234000
        }
        default_value 38400
        description   "
            This option specifies the default baud rate (speed) for the
            MN10300 port 0."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BUFSIZE {
        display       "Buffer size for the MN10300 serial port 0 driver"
        flavor        data
        legal_values  0 to 8192
        default_value 128
        description   "
            This option specifies the size of the internal buffers used
            for the MN10300 port 0."
    }
}

cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL1 {
    display       "MN10300 serial port 1 driver"
    flavor        bool
    default_value 0
    description   "
        This option includes the serial device driver for port 1 on
        the MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL1_NAME {
        display       "Device name for MN10300 serial port 1"
        flavor        data
        default_value {"\"/dev/ser1\""}
        description   "
            This option specifies the device name port 1 on the MN10300."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BAUD {
        display       "Baud rate for the MN10300 serial port 1 driver"
        flavor        data
        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
                      4800 7200 9600 14400 19200 38400 57600 115200 234000
        }
        default_value 38400
        description   "
            This option specifies the default baud rate (speed) for the
	    MN10300 port 1."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BUFSIZE {
        display       "Buffer size for the MN10300 serial port 1 driver"
        flavor        data
        legal_values  0 to 8192
        default_value 128
        description   "
            This option specifies the size of the internal buffers used
	    for the MN10300 port 1."
    }
}
cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL2 {
    display       "MN10300 serial port 2 driver"
    flavor        bool
    default_value 0
    description   "
        This option includes the serial device driver for port 2 on the
        MN10300."

    cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL2_NAME {
        display       "Device name for MN10300 serial port 2"
        flavor        data
        default_value {"\"/dev/ser2\""}
        description   "
            This option specifies the device name port 2 on the MN10300."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BAUD {
        display       "Baud rate for the MN10300 serial port 2 driver"
        flavor        data
        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
                      4800 7200 9600 14400 19200 38400 57600 115200 234000
        }
        default_value 38400
        description   "
            This option specifies the default baud rate (speed) for the 
	    MN10300 port 2."
    }

    cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BUFSIZE {
        display       "Buffer size for the MN10300 serial port 2 driver"
        flavor        data
        legal_values  0 to 8192
        default_value 128
        description   "
            This option specifies the size of the internal buffers used 
	    for the MN10300 port 2."
    }
}