/*==========================================================================
//
//      syscall.c
//
//      Redboot syscall handling for GNUPro bsp support
//
//==========================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 2000 Red Hat, Inc.                             
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    msalter
// Contributors: msalter
// Date:         1999-02-20
// Purpose:      Temporary support for gnupro bsp
//
//####DESCRIPTIONEND####
//
//=========================================================================*/

#include <redboot.h>

#ifdef CYGSEM_REDBOOT_BSP_SYSCALLS

#define	EIO 5		/* I/O error */

// These are required by the ANSI C part of newlib (excluding system() of
// course).
#define	SYS_exit	1
#define	SYS_open	2
#define	SYS_close	3
#define	SYS_read	4
#define	SYS_write	5
#define	SYS_lseek	6
#define	SYS_unlink	7
#define	SYS_getpid	8
#define	SYS_kill	9
#define SYS_fstat       10
//#define SYS_sbrk	11 - not currently a system call, but reserved.

// ARGV support.
#define SYS_argvlen	12
#define SYS_argv	13

// These are extras added for one reason or another.
#define SYS_chdir	14
#define SYS_stat	15
#define SYS_chmod 	16
#define SYS_utime 	17
#define SYS_time 	18

#define SYS_interrupt   1000

#define __GET_SHARED  0xbaad


/*
 * Clients of this BSP will need to have access to BSP functions and
 * data structures. Because, the client and the BSP may not be linked
 * together, a structure of vectors is used to gain this access. A
 * pointer to this structure can be gotten via a syscall. This syscall
 * is made automatically from within the crt0.o file.
 */
typedef struct {
    int		version;	/* version number for future expansion */
    const void **__ictrl_table;
    void **__exc_table;
    void *__dbg_vector;
    void *__kill_vector;
    void *__console_procs;
    void *__debug_procs;
    void (*__flush_dcache)(void *__p, int __nbytes);
    void (*__flush_icache)(void *__p, int __nbytes);
    void *__cpu_data;
    void *__board_data;
    void *__sysinfo;
    int	 (*__set_debug_comm)(int __comm_id);
    int	 (*__set_console_comm)(int __comm_id);
    int  (*__set_serial_baud)(int __comm_id, int baud);
    void *__dbg_data;
    void (*__reset)(void);
    int  __console_interrupt_flag;
} __shared_t;

static __shared_t __shared_data = { 2 };

static inline char __getc(void)
{
    char c;
    hal_virtual_comm_table_t* __chan = CYGACC_CALL_IF_CONSOLE_PROCS();
    
    if (__chan)
        c = CYGACC_COMM_IF_GETC(*__chan);
    else {
        __chan = CYGACC_CALL_IF_DEBUG_PROCS();
        c = CYGACC_COMM_IF_GETC(*__chan);
    }
    return c;
}

static inline void __putc(char c)
{
    hal_virtual_comm_table_t* __chan = CYGACC_CALL_IF_CONSOLE_PROCS();
    if (__chan)
	CYGACC_COMM_IF_PUTC(*__chan, c);
    else {
	__chan = CYGACC_CALL_IF_DEBUG_PROCS();
	CYGACC_COMM_IF_PUTC(*__chan, c);
    }
}


//
// read  -- read bytes from the serial port. Ignore fd, since
//          we only have stdin.
static int
sys_read(int fd, char *buf, int nbytes)
{
    int i = 0;

    for (i = 0; i < nbytes; i++) {
	*(buf + i) = __getc();
	if ((*(buf + i) == '\n') || (*(buf + i) == '\r')) {
	    (*(buf + i + 1)) = 0;
	    break;
	}
    }
    return (i);
}


//
// write -- write bytes to the serial port. Ignore fd, since
//          stdout and stderr are the same. Since we have no filesystem,
//          open will only return an error.
//
static int
sys_write(int fd, char *buf, int nbytes)
{
#define WBUFSIZE  256
    int  tosend;

    tosend = nbytes;

    while (tosend > 0) {
	if (*buf == '\n')
	    __putc('\r');
	__putc(*buf++);
	tosend--;
    }

    return (nbytes);
}


//
// open -- open a file descriptor. We don't have a filesystem, so
//         we return an error.
//
static int
sys_open (const char *buf, int flags, int mode)
{
    return (-EIO);
}


//
// close -- We don't need to do anything, but pretend we did.
//
static int
sys_close(int fd)
{
    return (0);
}


//
// lseek --  Since a serial port is non-seekable, we return an error.
//
static int
sys_lseek(int fd,  int offset, int whence)
{
    return (-EIO);
}


static int
sys_utime(unsigned long *p)
{
#ifdef HAVE_SYS_CLOCK
    extern unsigned long __clock;

    /* target clock runs at CLOCKS_PER_SEC. Convert to HZ */
    if (p)
	*p = (__clock * HZ) / CLOCKS_PER_SEC;
#else
    if (p)
	*p = 0;
#endif
    return 0;
}


//
//  Generic syscall handler.
//
//  Returns 0 if syscall number is not handled by this
//  module, 1 otherwise. This allows applications to
//  extend the syscall handler by using exception chaining.
//
int
__do_syscall(int func,			// syscall function number
	     long arg1, long arg2,	// up to four args.
	     long arg3, long arg4,
	     int *retval)		// syscall return value
{
    int err = 0;

    switch (func) {

      case SYS_read:
	err = sys_read((int)arg1, (char *)arg2, (int)arg3);
	break;

      case SYS_write:
	err = sys_write((int)arg1, (char *)arg2, (int)arg3);
	break;

      case SYS_open:
	err = sys_open((const char *)arg1, (int)arg2, (int)arg3);
	break;

      case SYS_close:
	err = sys_close((int)arg1);
	break;

      case SYS_lseek:
	err = sys_lseek((int)arg1, (int)arg2, (int)arg3);
	break;

      case SYS_utime:
	err = sys_utime((unsigned long *)arg1);
	break;

      case __GET_SHARED:
	*(__shared_t **)arg1 = &__shared_data;
	break;

      default:
	return 0;
    }    

    *retval = err;
    return 1;
}

#endif