2002-06-14  Gary Thomas  <gary@chez-thomas.org>

	* src/if_sc_lpe.c: 
	Need to include <pkgconf/io_eth_drivers.h> for proper configuration
	of stand-alone (polled) vs. system (interrupt driven) mode.

2002-05-30  Jonathan Larmour  <jlarmour@redhat.com>

	* src/if_sc_lpe.c: Conditionalize use of thread on CYGPKG_KERNEL
	not CYGPKG_NET.

2002-04-12  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Clean up warnings.

2001-10-16  Jesper Skov  <jskov@redhat.com>

	* include/devs_eth_cf.inl: Added buffer parameters.

2001-08-25  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_card_handler): Rework ESA discovery code.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: 
	printf() is no longer a part of RedBoot.  Thus all programs
	must use diag_printf() and related functions instead.

2001-06-16  Jesper Skov  <jskov@redhat.com>

	* src/if_sc_lpe.c: Use generic DP83902A driver, only redefining
	the init function to handle card details (which incidently do not
	appear to be fully working).

	* include/devs_eth_cf.inl: Device details moved here so the
	generic driver can access them.

	* cdl/cf_eth_drivers.cdl: Changes to use generic driver. Allow ESA
	to be configured.
	Require DP83902A package.

	* src/dp8390.h: Deleted.

2001-04-13  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_card_handler): Work around broken card(s)
	which do not have valid ESA in config EPROM.

2000-09-15  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Suppress noisy message which seems to sometimes
	happen if the card is re-initialized from warm.

2000-09-14  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Better recovery for bad devices [stand-alone].

2000-09-13  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Fix handling of receive buffer overflow,
	i.e. missed data.  [quietly ignored]

	* src/dp8390.h: Update layout of Tx/Rx buffers.

2000-09-12  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_card_handler): Handle case when card 
	is warm (powered up from boot ROM).

2000-09-01  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/if_sc_lpe.c (sc_lpe_init): Work with new fast net
	thread to do all the copying work instead of loading up DSR time.
	In detail:
	 o New "deliver" function in the interface record.  It's the same
	 function as the poll entry; sc_lpe_int().
	 o In registering the interrupt handler, use eth_drv_dsr (from the
	   logical driver) instead of sc_lpe_int.

2000-08-29  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_recv): Better handling if upper layer
	had no buffers [this routine called anyway].

2000-08-28  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Better handling of "hot" cards (i.e. one
	initialized by a debug environment).

2000-08-23  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Add new function to return interrupt vector
	used by interface.  Also, handle interrupts from interface even
	if there is no kernel (CF callback).

2000-08-03  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Ensure DSR locked while initializing hardware.

	* cdl/cf_eth_drivers.cdl: Ethernet driver package hierarchy changed.

2000-07-26  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: Update for new eth_drv interfaces (via *sc).

2000-07-18  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_RxEvent): Handle case where chip gets lost
	and keeps returning the same input packet (hardware bug?).

2000-07-16  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c (sc_lpe_card_handler): Add initialization message and
	timeout when running stand-alone.

2000-07-15  Gary Thomas  <gthomas@redhat.com>

	* src/if_sc_lpe.c: CF interrupts are now handled by the slot handler,
	not directly in this code.

2000-07-14  Gary Thomas  <gthomas@redhat.com>

	* cdl/cf_eth_drivers.cdl: 
	* src/if_sc_lpe.c: Support building in eCos and stand-alone modes.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================