//==========================================================================
//
//      plf_misc.c
//
//      HAL platform miscellaneous functions
//
//==========================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    nickg
// Contributors: nickg, jlarmour, dmoseley
// Date:         2000-06-06
// Purpose:      HAL miscellaneous functions
// Description:  This file contains miscellaneous functions provided by the
//               HAL.
//
//####DESCRIPTIONEND####
//
//========================================================================*/

#define CYGARC_HAL_COMMON_EXPORT_CPU_MACROS
#include <pkgconf/hal.h>

#include <cyg/infra/cyg_type.h>         // Base types
#include <cyg/infra/cyg_trac.h>         // tracing macros
#include <cyg/infra/cyg_ass.h>          // assertion macros

#include <cyg/hal/hal_arch.h>           // architectural definitions

#include <cyg/hal/hal_intr.h>           // Interrupt handling

#include <cyg/hal/hal_cache.h>          // Cache handling

#include <cyg/hal/hal_if.h>


#if defined(CYGPKG_IO_PCI)
#include <cyg/io/pci_hw.h>
#include <cyg/io/pci.h>
#endif

/*------------------------------------------------------------------------*/

#if defined(CYGPKG_CYGMON)
#include CYGHWR_MEMORY_LAYOUT_H
extern unsigned long cygmon_memsize;
#endif

void hal_platform_init(void)
{
    HAL_WRITE_UINT32(HAL_DISPLAY_LEDBAR, 0xff);
#if defined(CYGPKG_CYGMON)
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS0, ' ');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS1, 'C');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS2, 'Y');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS3, 'G');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS4, 'M');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS5, 'O');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS6, 'N');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS7, ' ');
#elif defined(CYGPKG_REDBOOT)
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS0, 'R');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS1, 'e');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS2, 'd');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS3, 'B');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS4, 'o');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS5, 'o');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS6, 't');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS7, ' ');
#else
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS0, ' ');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS1, ' ');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS2, 'e');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS3, 'C');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS4, 'O');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS5, 'S');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS6, ' ');
    HAL_WRITE_UINT32(HAL_DISPLAY_ASCIIPOS7, ' ');
#endif

    // Set up eCos/ROM interfaces
    hal_if_init();

    HAL_ICACHE_INVALIDATE_ALL();    
    HAL_ICACHE_ENABLE();
    HAL_DCACHE_INVALIDATE_ALL();
    HAL_DCACHE_ENABLE();

#if defined(CYGPKG_CYGMON)
    {
        // Store the BSP memory info
        unsigned long * ram_real_base = (unsigned long *)0x80000000;
        unsigned long memsize = *ram_real_base;
        // Adjust memsize for the interrupt vectors reserved space
        memsize -= (CYGMEM_REGION_ram - (unsigned long)ram_real_base);
        cygmon_memsize = memsize;
    }

    {
        //
        // Go ahead and enable IM[2] (ie HWInt[0]) so that we get interrupts 
        // from the external devices.  The device interrupts will still be
        // disabled in the CBUS FPGA interrupt controller, so this will not
        // cause spurious interrupts.
        // It is still up to the device drivers to enable the interrupts in
        // the interrupt controller
        //
        register unsigned long status;
        asm volatile (" mfc0 %0, $12" : "=r" (status) : ); 
        status |= SR_IBIT3;
        asm volatile (" mtc0 %0, $12" : : "r" (status));
    }
#endif
}


/*------------------------------------------------------------------------*/
/* Reset support                                                          */

void hal_atlas_reset(void)
{
    *HAL_ATLAS_SOFTRES = HAL_ATLAS_GORESET;
}

/*------------------------------------------------------------------------*/
/* Syscall support                                                        */
#ifdef CYGPKG_CYGMON
// Cygmon provides syscall handling for this board
#include <cyg/hal/hal_stub.h>
int __get_syscall_num (void)
{
    return SIGSYS;
}
#endif


/*------------------------------------------------------------------------*/
/* PCI support                                                            */
#if defined(CYGPKG_IO_PCI)

#define PCIMEM_START	0x08000000 // PCI memory address
#define PCIMEM_SIZE	0x10000000 //   256 MByte
#define PCIIO_START	0x18000000 // PCI io address
#define PCIIO_SIZE	0x03E00000 //    62 MByte

static int __check_bar(cyg_uint32 addr, cyg_uint32 size)
{
    int n;

    for (n = 0; n <= 31; n++)
	if (size == (1 << n)) {
	    /* Check that address is naturally aligned */
	    if (addr != (addr & ~(size-1)))
		return 0;
	    return size - 1;
	}
    return 0;
}


// One-time PCI initialization.

void cyg_hal_plf_pci_init(void)
{
    cyg_uint32 bar_ena, start10, start32, end, size;
    cyg_uint8  next_bus;

    // Setup for bus mastering
    cyg_hal_plf_pci_cfg_write_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				    CYG_PCI_CFG_COMMAND,
				    CYG_PCI_CFG_COMMAND_IO |
				    CYG_PCI_CFG_COMMAND_MEMORY |
				    CYG_PCI_CFG_COMMAND_MASTER |
				    CYG_PCI_CFG_COMMAND_PARITY |
				    CYG_PCI_CFG_COMMAND_SERR);

    // Setup latency timer field
    cyg_hal_plf_pci_cfg_write_byte(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				   CYG_PCI_CFG_LATENCY_TIMER, 6);

    // Disable all BARs
    bar_ena = 0x1ff;

    // Check for active SCS10
    start10 = HAL_GALILEO_GETREG(HAL_GALILEO_SCS10_LD_OFFSET) << 21;
    end   = ((HAL_GALILEO_GETREG(HAL_GALILEO_SCS10_HD_OFFSET) & 0x7f) + 1) << 21;
    if (end > start10) {
	if ((size = __check_bar(start10, end - start10)) != 0) {
	    // Enable BAR
	    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_SCS10_SIZE_OFFSET, size);
	    bar_ena &= ~HAL_GALILEO_BAR_ENA_SCS10;
	}
    }

    // Check for active SCS32
    start32 = HAL_GALILEO_GETREG(HAL_GALILEO_SCS32_LD_OFFSET) << 21;
    end   = ((HAL_GALILEO_GETREG(HAL_GALILEO_SCS32_HD_OFFSET) & 0x7f) + 1) << 21;
    if (end > start32) {
	if ((size = __check_bar(start32, end - start32)) != 0) {
	    // Enable BAR
	    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_SCS32_SIZE_OFFSET, size);
	    bar_ena &= ~HAL_GALILEO_BAR_ENA_SCS32;
	}
    }

    bar_ena &= ~HAL_GALILEO_BAR_ENA_SCS10;
    HAL_GALILEO_PUTREG(HAL_GALILEO_BAR_ENA_OFFSET, bar_ena);


    cyg_hal_plf_pci_cfg_write_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				    CYG_PCI_CFG_BAR_0, 0xffffffff);

    end = cyg_hal_plf_pci_cfg_read_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
					 CYG_PCI_CFG_BAR_0);
	
    cyg_hal_plf_pci_cfg_write_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				    CYG_PCI_CFG_BAR_0, start10);


    cyg_hal_plf_pci_cfg_write_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				    CYG_PCI_CFG_BAR_1, 0xffffffff);

    end = cyg_hal_plf_pci_cfg_read_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
					 CYG_PCI_CFG_BAR_1);

    cyg_hal_plf_pci_cfg_write_dword(0, CYG_PCI_DEV_MAKE_DEVFN(0,0),
				    CYG_PCI_CFG_BAR_1, start32);


#if 0  // FIXME

    // SAA9730 was previously initialized just enough to use I2C bus
    // during SDRAM configuration. We reset it here so generic PCI
    // library can deal with it.
    *((volatile unsigned *)(HAL_GALILEO_PCI0_MEM0_BASE + HAL_SAA9730_SYSRESET_OFFSET))
      = HAL_SAA9730_SYSRESET_ALL;
#endif

    // Configure PCI bus.
    next_bus = 1;
    cyg_pci_set_memory_base(CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_PCI_MEM0_BASE));
    cyg_pci_set_io_base(CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_PCI_IO_BASE));
    cyg_pci_configure_bus(0, &next_bus);
}


// Check for configuration error.
static int pci_config_errcheck(void)
{
    cyg_uint32  irq;

    // Check for master or target abort
    irq = HAL_GALILEO_GETREG(HAL_GALILEO_IRQ_CAUSE_OFFSET);

    if (irq & (HAL_GALILEO_IRQCAUSE_MASABT | HAL_GALILEO_IRQCAUSE_TARABT)) {
	// Error. Clear bits.
	HAL_GALILEO_PUTREG(HAL_GALILEO_IRQ_CAUSE_OFFSET,
			   ~(HAL_GALILEO_IRQCAUSE_MASABT | HAL_GALILEO_IRQCAUSE_TARABT));
        return 1;
    }
    return 0;
}

cyg_uint32 cyg_hal_plf_pci_cfg_read_dword (cyg_uint32 bus,
					   cyg_uint32 devfn,
					   cyg_uint32 offset)
{
    cyg_uint32 config_data;

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
                       (bus << 16) | (devfn << 8) | offset);

    config_data = HAL_GALILEO_GETREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET);

    if (pci_config_errcheck())
	return 0xffffffff;
    return config_data;
}

cyg_uint16 cyg_hal_plf_pci_cfg_read_word (cyg_uint32 bus,
					  cyg_uint32 devfn,
					  cyg_uint32 offset)
{
    cyg_uint32 config_dword;

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
		       (bus << 16) | (devfn << 8) | (offset & ~3));

    config_dword = HAL_GALILEO_GETREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET);

    if (pci_config_errcheck())
	return 0xffff;
    return (cyg_uint16)((config_dword >> ((offset & 3) * 8)) & 0xffff);
}

cyg_uint8 cyg_hal_plf_pci_cfg_read_byte (cyg_uint32 bus,
					 cyg_uint32 devfn,
					 cyg_uint32 offset)
{
    cyg_uint32 config_dword;

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
		       (bus << 16) | (devfn << 8) | (offset & ~3));

    config_dword = HAL_GALILEO_GETREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET);

    if (pci_config_errcheck())
	return 0xff;
    return (cyg_uint8)((config_dword >> ((offset & 3) * 8)) & 0xff);
}

void cyg_hal_plf_pci_cfg_write_dword (cyg_uint32 bus,
				      cyg_uint32 devfn,
				      cyg_uint32 offset,
				      cyg_uint32 data)
{
    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
		       (bus << 16) | (devfn << 8) | offset);

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET, data);

    (void)pci_config_errcheck();
}

void cyg_hal_plf_pci_cfg_write_word (cyg_uint32 bus,
				     cyg_uint32 devfn,
				     cyg_uint32 offset,
				     cyg_uint16 data)
{
    cyg_uint32 config_dword, shift;

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
		       (bus << 16) | (devfn << 8) | (offset & ~3));

    config_dword = HAL_GALILEO_GETREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET);
    if (pci_config_errcheck())
	return;

    shift = (offset & 3) * 8;
    config_dword &= ~(0xffff << shift);
    config_dword |= (data << shift);

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET, config_dword);

    (void)pci_config_errcheck();
}

void cyg_hal_plf_pci_cfg_write_byte (cyg_uint32 bus,
				     cyg_uint32 devfn,
				     cyg_uint32 offset,
				     cyg_uint8  data)
{
    cyg_uint32 config_dword, shift;

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET,
		       HAL_GALILEO_PCI0_CONFIG_ADDR_ENABLE |
		       (bus << 16) | (devfn << 8) | (offset & ~3));

    config_dword = HAL_GALILEO_GETREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET);
    if (pci_config_errcheck())
	return;

    shift = (offset & 3) * 8;
    config_dword &= ~(0xff << shift);
    config_dword |= (data << shift);

    HAL_GALILEO_PUTREG(HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET, config_dword);

    (void)pci_config_errcheck();
}
#endif  // defined(CYGPKG_IO_PCI)

/*------------------------------------------------------------------------*/
/* End of plf_misc.c                                                      */