Mercurial > flash_v2
view packages/hal/mips/arch/current/include/hal_io.h @ 64:c38311975d4f ecos-sw-2000-01-28
Merge from eCos master repository on 2000-01-28-04:28:11-GMT
| author | jlarmour |
|---|---|
| date | Fri, 28 Jan 2000 04:59:39 +0000 |
| parents | 29bc183297e1 |
| children | bf00f99aec69 |
line wrap: on
line source
#ifndef CYGONCE_HAL_HAL_IO_H #define CYGONCE_HAL_HAL_IO_H //============================================================================= // // hal_io.h // // HAL device IO register support. // //============================================================================= //####COPYRIGHTBEGIN#### // // ------------------------------------------- // The contents of this file are subject to the Red Hat eCos Public License // Version 1.0 (the "License"); you may not use this file except in // compliance with the License. You may obtain a copy of the License at // http://sourceware.cygnus.com/ecos // // Software distributed under the License is distributed on an // basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the // License for the specific language governing rights and limitations under // the License. // // The Original Code is eCos - Embedded Configurable Operating System, // released September 30, 1998. // // The Initial Developer of the Original Code is Red Hat. // Portions created by Red Hat are // Copyright (C) 1998, 1999, 2000 Red Hat, Inc. // All Rights Reserved. // ------------------------------------------- // //####COPYRIGHTEND#### //============================================================================= //#####DESCRIPTIONBEGIN#### // // Author(s): nickg // Contributors: nickg // Date: 1998-02-17 // Purpose: Define IO register support // Description: The macros defined here provide the HAL APIs for handling // device IO control registers. // // Usage: // #include <cyg/hal/hal_io.h> // ... // // //####DESCRIPTIONEND#### // //============================================================================= #include <pkgconf/hal.h> #include <cyg/infra/cyg_type.h> #include <cyg/hal/plf_io.h> //----------------------------------------------------------------------------- // IO Register address. // This type is for recording the address of an IO register. typedef volatile CYG_ADDRWORD HAL_IO_REGISTER; //----------------------------------------------------------------------------- // BYTE Register access. // Individual and vectorized access to 8 bit registers. #define HAL_READ_UINT8( _register_, _value_ ) \ ((_value_) = *((volatile CYG_BYTE *)(_register_))) #define HAL_WRITE_UINT8( _register_, _value_ ) \ (*((volatile CYG_BYTE *)(_register_)) = (_value_)) #define HAL_READ_UINT8_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ (_buf_)[_i_] = ((volatile CYG_BYTE *)(_register_))[_j_]; \ } #define HAL_WRITE_UINT8_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ ((volatile CYG_BYTE *)(_register_))[_j_] = (_buf_)[_i_]; \ } //----------------------------------------------------------------------------- // 16 bit access. // Individual and vectorized access to 16 bit registers. #define HAL_READ_UINT16( _register_, _value_ ) \ ((_value_) = *((volatile CYG_WORD16 *)(_register_))) #define HAL_WRITE_UINT16( _register_, _value_ ) \ (*((volatile CYG_WORD16 *)(_register_)) = (_value_)) #define HAL_READ_UINT16_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ (_buf_)[_i_] = ((volatile CYG_WORD16 *)(_register_))[_j_]; \ } #define HAL_WRITE_UINT16_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ ((volatile CYG_WORD16 *)(_register_))[_j_] = (_buf_)[_i_]; \ } //----------------------------------------------------------------------------- // 32 bit access. // Individual and vectorized access to 32 bit registers. #define HAL_READ_UINT32( _register_, _value_ ) \ ((_value_) = *((volatile CYG_WORD32 *)(_register_))) #define HAL_WRITE_UINT32( _register_, _value_ ) \ (*((volatile CYG_WORD32 *)(_register_)) = (_value_)) #define HAL_READ_UINT32_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ (_buf_)[_i_] = ((volatile CYG_WORD32 *)(_register_))[_j_]; \ } #define HAL_WRITE_UINT32_VECTOR( _register_, _buf_, _count_, _step_ ) \ { \ cyg_count32 _i_,_j_; \ for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) \ ((volatile CYG_WORD32 *)(_register_))[_j_] = (_buf_)[_i_]; \ } //----------------------------------------------------------------------------- #endif // ifndef CYGONCE_HAL_HAL_IO_H // End of hal_io.h
