Mercurial > flash_v2

changeset 1640:b958d883e5f5

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
New package whch implements generic support for the serial port on the arm s3c4510
author asl
date Fri, 14 May 2004 14:53:37 +0000
parents 73b71f156116
children 23c0a1c0b988
files packages/devs/serial/arm/s3c4510/current/ChangeLog packages/devs/serial/arm/s3c4510/current/cdl/ser_arm_s3c4510.cdl packages/devs/serial/arm/s3c4510/current/src/s3c4510_serial.c packages/devs/serial/arm/s3c4510/current/src/s3c4510_serial.h
diffstat 4 files changed, 655 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/arm/s3c4510/current/ChangeLog
@@ -0,0 +1,49 @@
+2004-02-11  Roland Caßebohm  <roland.cassebohm@visionsystem.de>
+
+        * src/s3c4510_serial.c: The UART doesn't generate an interrupt
+	  before the first time a character was send. Changed
+	  s3c4510_serial_start_xmit() to first try to send characters.
+
+2003-02-24  Jonathan Larmour  <jifl@eCosCentric.com>
+
+	* cdl/ser_arm_s3c4510.cdl: Remove irrelevant doc link.
+
+2001-10-19  Lars Lindqvist  <Lars.Lindqvist@combitechsystems.com>
+2001-10-19  Jonathan Larmour  <jlarmour@redhat.com>
+
+	* New package.
+
+//===========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//===========================================================================
new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/arm/s3c4510/current/cdl/ser_arm_s3c4510.cdl
@@ -0,0 +1,113 @@
+# ====================================================================
+#
+#      ser_arm_s3c4510.cdl
+#
+#      eCos serial ARM/S3C4510 configuration data
+#
+# ====================================================================
+#####ECOSGPLCOPYRIGHTBEGIN####
+## -------------------------------------------
+## This file is part of eCos, the Embedded Configurable Operating System.
+## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+##
+## eCos is free software; you can redistribute it and/or modify it under
+## the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 or (at your option) any later version.
+##
+## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with eCos; if not, write to the Free Software Foundation, Inc.,
+## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+##
+## As a special exception, if other files instantiate templates or use macros
+## or inline functions from this file, or you compile this file and link it
+## with other works to produce a work based on this file, this file does not
+## by itself cause the resulting work to be covered by the GNU General Public
+## License. However the source code for this file must still be made available
+## in accordance with section (3) of the GNU General Public License.
+##
+## This exception does not invalidate any other reasons why a work based on
+## this file might be covered by the GNU General Public License.
+##
+## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+## at http://sources.redhat.com/ecos/ecos-license/
+## -------------------------------------------
+#####ECOSGPLCOPYRIGHTEND####
+# ====================================================================
+######DESCRIPTIONBEGIN####
+#
+# Author(s):      Lars.Lindqvist@combitechsystems.com
+# Contributors:   jlarmour
+# Date:           2001-10-19
+#
+#####DESCRIPTIONEND####
+#
+# ====================================================================
+
+
+cdl_package CYGPKG_IO_SERIAL_ARM_S3C4510 {
+    display       "ARM S3C4510 serial device drivers"
+
+    parent        CYGPKG_IO_SERIAL_DEVICES
+    active_if     CYGPKG_IO_SERIAL
+
+    active_if     CYGINT_IO_SERIAL_ARM_S3C4510_REQUIRED
+
+    requires      CYGPKG_ERROR
+    include_dir   cyg/io
+    include_files ; # none _exported_ whatsoever
+    description   "
+           This package contains serial device drivers for the
+           ARM S3C4510."
+
+    compile       -library=libextras.a   s3c4510_serial.c
+
+    define_proc {
+        puts $::cdl_system_header "/***** serial driver proc output start *****/"
+        puts $::cdl_system_header "#ifndef CYGDAT_IO_SERIAL_DEVICE_HEADER"
+        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_arm_s3c4510.h>"
+        puts $::cdl_system_header "#endif"
+        puts $::cdl_system_header "/*****  serial driver proc output end  *****/"
+        puts $::cdl_header "#include <pkgconf/system.h>";
+        puts $::cdl_header "#include CYGDAT_IO_SERIAL_ARM_S3C4510_CFG";
+    }
+
+    cdl_component CYGPKG_IO_SERIAL_ARM_S3C4510_OPTIONS {
+        display "Serial device driver build options"
+        flavor  none
+        description   "
+	    Package specific build options including control over
+	    compiler flags used only in building this package,
+	    and details of which tests are built."
+
+
+        cdl_option CYGPKG_IO_SERIAL_ARM_S3C4510_CFLAGS_ADD {
+            display "Additional compiler flags"
+            flavor  data
+            no_define
+            default_value { "" }
+            description   "
+                This option modifies the set of compiler flags for
+                building these serial device drivers. These flags are used in addition
+                to the set of global flags."
+        }
+
+        cdl_option CYGPKG_IO_SERIAL_ARM_S3C4510_CFLAGS_REMOVE {
+            display "Suppressed compiler flags"
+            flavor  data
+            no_define
+            default_value { "" }
+            description   "
+                This option modifies the set of compiler flags for
+                building these serial device drivers. These flags are removed from
+                the set of global flags if present."
+        }
+    }
+
+}
+
+# EOF ser_arm_s3c4510.cdl
new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/arm/s3c4510/current/src/s3c4510_serial.c
@@ -0,0 +1,297 @@
+//==========================================================================
+//
+//      io/serial/arm/s3c4510_serial.c
+//
+//      ARM S3C4510 Serial I/O Interface Module (interrupt driven)
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+// ====================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):    Lars.Lindqvist@combitechsystems.com
+// Contributors: jlarmour
+// Date:         2001-10-19
+// Purpose:      ARM S3C4510 Serial I/O Interface Module (interrupt driven)
+// Description:
+//
+//####DESCRIPTIONEND####
+//
+// ====================================================================
+
+#include <pkgconf/system.h>
+#include <pkgconf/io_serial.h>
+#include <pkgconf/io.h>
+#include <cyg/io/io.h>
+#include <cyg/hal/hal_intr.h>
+#include <cyg/io/devtab.h>
+#include <cyg/io/serial.h>
+#include <cyg/io/serialio.h>
+#include <cyg/infra/diag.h>
+
+#if defined(CYGPKG_IO_SERIAL_ARM_S3C4510) && defined(CYGDAT_IO_SERIAL_ARM_S3C4510_INL)
+
+typedef struct s3c4510_serial_info {
+    CYG_ADDRWORD   base;
+    CYG_WORD       tx_int_num;
+    CYG_WORD       rx_int_num;
+    cyg_interrupt  serial_tx_interrupt;
+    cyg_interrupt  serial_rx_interrupt;
+    cyg_handle_t   serial_tx_interrupt_handle;
+    cyg_handle_t   serial_rx_interrupt_handle;
+    bool           tx_enabled;
+} s3c4510_serial_info;
+
+static bool s3c4510_serial_init(struct cyg_devtab_entry *tab);
+static bool s3c4510_serial_putc(serial_channel *chan, unsigned char c);
+static Cyg_ErrNo s3c4510_serial_lookup(struct cyg_devtab_entry **tab, 
+                                   struct cyg_devtab_entry *sub_tab,
+                                   const char *name);
+static unsigned char s3c4510_serial_getc(serial_channel *chan);
+static Cyg_ErrNo s3c4510_serial_set_config(serial_channel *chan, 
+                                       cyg_uint32 key,
+                                       const void *xbuf, cyg_uint32 *len);
+static void s3c4510_serial_start_xmit(serial_channel *chan);
+static void s3c4510_serial_stop_xmit(serial_channel *chan);
+
+static cyg_uint32 s3c4510_serial_tx_ISR(cyg_vector_t vector, cyg_addrword_t data);
+static void       s3c4510_serial_tx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data);
+static cyg_uint32 s3c4510_serial_rx_ISR(cyg_vector_t vector, cyg_addrword_t data);
+static void       s3c4510_serial_rx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data);
+
+static SERIAL_FUNS(s3c4510_serial_funs, 
+                   s3c4510_serial_putc, 
+                   s3c4510_serial_getc,
+                   s3c4510_serial_set_config,
+                   s3c4510_serial_start_xmit,
+                   s3c4510_serial_stop_xmit
+    );
+
+#include CYGDAT_IO_SERIAL_ARM_S3C4510_INL
+
+#include "s3c4510_serial.h"
+
+// Internal function to actually configure the hardware to desired baud rate, etc.
+static bool
+s3c4510_serial_config_port(serial_channel *chan, cyg_serial_info_t *new_config, bool init)
+{
+  s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+  volatile struct serial_port *port = (volatile struct serial_port *)s3c4510_chan->base;
+  cyg_uint32 word_length = select_word_length[(new_config->word_length)-CYGNUM_SERIAL_WORD_LENGTH_5];
+  cyg_uint32 stop_bits = select_stop_bits[(new_config->stop)-CYGNUM_SERIAL_STOP_1];
+  cyg_uint32 parity_mode = select_parity[(new_config->parity)-CYGNUM_SERIAL_PARITY_NONE];
+  cyg_uint32 baud_divisor = select_baud[(new_config->baud)-CYGNUM_SERIAL_BAUD_50];
+  cyg_uint32 res = word_length | stop_bits | parity_mode | ULCON_SCI | ULCON_IROFF;
+  if ((word_length|stop_bits|parity_mode|baud_divisor) == U_NOT_SUPP) {
+    return false;
+  };
+  port->REG_ULCON = res;
+  port->REG_UCON = UCON_RXMINT | UCON_RXSIOFF | UCON_TXMINT | UCON_DSROFF | UCON_SBKOFF | UCON_LPBOFF;
+  port->REG_UBRDIV = baud_divisor;
+  if (new_config != &chan->config) {
+    chan->config = *new_config;
+  };
+  return true;
+}
+
+// Function to initialize the device.  Called at bootstrap time.
+static bool 
+s3c4510_serial_init(struct cyg_devtab_entry *tab)
+{
+    serial_channel *chan = (serial_channel *)tab->priv;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+#ifdef CYGDBG_IO_INIT
+    diag_printf("S3C4510 SERIAL init - dev: %x.%d.%d\n", s3c4510_chan->base, s3c4510_chan->tx_int_num, s3c4510_chan->rx_int_num);
+#endif
+    (chan->callbacks->serial_init)(chan);  // Really only required for interrupt driven devices
+    if (chan->out_cbuf.len != 0) {         // If bufferlength > 0 then interrupts are used for tx
+        cyg_drv_interrupt_create(s3c4510_chan->tx_int_num,
+                                 99,                     // Priority - unused
+                                 (cyg_addrword_t)chan,   //  Data item passed to interrupt handler
+                                 s3c4510_serial_tx_ISR,
+                                 s3c4510_serial_tx_DSR,
+                                 &s3c4510_chan->serial_tx_interrupt_handle,
+                                 &s3c4510_chan->serial_tx_interrupt);
+        cyg_drv_interrupt_attach(s3c4510_chan->serial_tx_interrupt_handle);
+        cyg_drv_interrupt_mask(s3c4510_chan->tx_int_num);
+        s3c4510_chan->tx_enabled = false;
+    }
+    if (chan->in_cbuf.len != 0) {         // If bufferlength > 0 then interrupts are used for rx
+        cyg_drv_interrupt_create(s3c4510_chan->rx_int_num,
+                                 99,                     // Priority - unused
+                                 (cyg_addrword_t)chan,   //  Data item passed to interrupt handler
+                                 s3c4510_serial_rx_ISR,
+                                 s3c4510_serial_rx_DSR,
+                                 &s3c4510_chan->serial_rx_interrupt_handle,
+                                 &s3c4510_chan->serial_rx_interrupt);
+        cyg_drv_interrupt_attach(s3c4510_chan->serial_rx_interrupt_handle);
+        cyg_drv_interrupt_unmask(s3c4510_chan->rx_int_num);
+    }
+    s3c4510_serial_config_port(chan, &chan->config, true);
+    return true;
+}
+
+// This routine is called when the device is "looked" up (i.e. attached)
+static Cyg_ErrNo 
+s3c4510_serial_lookup(struct cyg_devtab_entry **tab, 
+                  struct cyg_devtab_entry *sub_tab,
+                  const char *name)
+{
+    serial_channel *chan = (serial_channel *)(*tab)->priv;
+    (chan->callbacks->serial_init)(chan);  // Really only required for interrupt driven devices
+    return ENOERR;
+}
+
+// Send a character to the device output buffer.
+// Return 'true' if character is sent to device
+static bool
+s3c4510_serial_putc(serial_channel *chan, unsigned char c)
+{
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    volatile struct serial_port *port = (volatile struct serial_port *)s3c4510_chan->base;
+
+    if (port->REG_USTAT & USTAT_TBE) {
+      // Transmit buffer is empty
+      port->REG_UTXBUF = c;
+      return true;
+    } else {
+      // No space
+      return false;
+    }
+}
+
+// Fetch a character from the device input buffer, waiting if necessary
+static unsigned char 
+s3c4510_serial_getc(serial_channel *chan)
+{
+    unsigned char c;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    volatile struct serial_port *port = (volatile struct serial_port *)s3c4510_chan->base;
+    while ((port->REG_USTAT & USTAT_RDR) == 0) ;   // Wait for char
+    c = port->REG_URXBUF;
+    return c;
+}
+
+// Set up the device characteristics; baud rate, etc.
+static Cyg_ErrNo
+s3c4510_serial_set_config(serial_channel *chan, cyg_uint32 key,
+                      const void *xbuf, cyg_uint32 *len)
+{
+    switch (key) {
+    case CYG_IO_SET_CONFIG_SERIAL_INFO:
+      {
+        cyg_serial_info_t *config = (cyg_serial_info_t *)xbuf;
+        if ( *len < sizeof(cyg_serial_info_t) ) {
+            return -EINVAL;
+        }
+        *len = sizeof(cyg_serial_info_t);
+        if ( true != s3c4510_serial_config_port(chan, config, false) )
+            return -EINVAL;
+      }
+      break;
+    default:
+        return -EINVAL;
+    }
+    return ENOERR;
+}
+
+// Enable the transmitter on the device
+static void
+s3c4510_serial_start_xmit(serial_channel *chan)
+{
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    s3c4510_chan->tx_enabled = true;
+    (chan->callbacks->xmt_char)(chan);
+    if (s3c4510_chan->tx_enabled) {
+        cyg_drv_interrupt_unmask(s3c4510_chan->tx_int_num);
+    }
+}
+
+// Disable the transmitter on the device
+static void 
+s3c4510_serial_stop_xmit(serial_channel *chan)
+{
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    cyg_drv_interrupt_mask(s3c4510_chan->tx_int_num);
+    s3c4510_chan->tx_enabled = false;
+}
+
+// Serial I/O - low level tx interrupt handler (ISR)
+static cyg_uint32 
+s3c4510_serial_tx_ISR(cyg_vector_t vector, cyg_addrword_t data)
+{
+    serial_channel *chan = (serial_channel *)data;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    cyg_drv_interrupt_mask(s3c4510_chan->tx_int_num);
+    cyg_drv_interrupt_acknowledge(s3c4510_chan->tx_int_num);
+    return CYG_ISR_CALL_DSR;  // Cause DSR to be run
+}
+
+// Serial I/O - high level tx interrupt handler (DSR)
+static void       
+s3c4510_serial_tx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
+{
+    serial_channel *chan = (serial_channel *)data;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    (chan->callbacks->xmt_char)(chan);
+    if (s3c4510_chan->tx_enabled) {
+        cyg_drv_interrupt_unmask(s3c4510_chan->tx_int_num);
+    }
+}
+
+// Serial I/O - low level rx interrupt handler (ISR)
+static cyg_uint32 
+s3c4510_serial_rx_ISR(cyg_vector_t vector, cyg_addrword_t data)
+{
+    serial_channel *chan = (serial_channel *)data;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    cyg_drv_interrupt_mask(s3c4510_chan->rx_int_num);
+    cyg_drv_interrupt_acknowledge(s3c4510_chan->rx_int_num);
+    return CYG_ISR_CALL_DSR;  // Cause DSR to be run
+}
+
+// Serial I/O - high level rx interrupt handler (DSR)
+static void       
+s3c4510_serial_rx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
+{
+    serial_channel *chan = (serial_channel *)data;
+    s3c4510_serial_info *s3c4510_chan = (s3c4510_serial_info *)chan->dev_priv;
+    volatile struct serial_port *port = (volatile struct serial_port *)s3c4510_chan->base;
+    (chan->callbacks->rcv_char)(chan, port->REG_URXBUF);
+    cyg_drv_interrupt_unmask(s3c4510_chan->rx_int_num);
+}
+
+#endif // CYGPKG_IO_SERIAL_ARM_S3C4510 && CYGDAT_IO_SERIAL_ARM_S3C4510_INL
+
+// EOF s3c4510_serial.c
new file mode 100644
--- /dev/null
+++ b/packages/devs/serial/arm/s3c4510/current/src/s3c4510_serial.h
@@ -0,0 +1,196 @@
+#ifndef CYGONCE_ARM_S3C4510_SERIAL_H
+#define CYGONCE_ARM_S3C4510_SERIAL_H
+// ====================================================================
+//
+//      s3c4510_serial.h
+//
+//      Device I/O - Description of ARM S3C4510 serial hardware
+//
+// ====================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+// ====================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):    Lars.Lindqvist@combitechsystems.com
+// Contributors: jlarmour
+// Date:         2001-10-19
+// Purpose:      Internal interfaces for serial I/O drivers
+// Description:
+//
+//####DESCRIPTIONEND####
+//
+// ====================================================================
+
+#include <pkgconf/hal.h>        // Value CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED needed
+#include <cyg/infra/cyg_type.h> // base types
+
+// Description of serial ports on ARM S3C4510
+
+struct serial_port {
+    cyg_uint32 _reg[8];
+};
+
+#define REG(n) _reg[n]
+
+// Misc values
+#define U_NOT_SUPP    (0xFFFFFFFF)  // Used to indicate unsupported parameter values
+
+// Registers
+#define REG_ULCON  REG(0)    // Line control registers
+#define REG_UCON   REG(1)    // Control registers
+#define REG_USTAT  REG(2)    // Status registers
+#define REG_UTXBUF REG(3)    // Transmit buffer registers
+#define REG_URXBUF REG(4)    // Receive buffer registers
+#define REG_UBRDIV REG(5)    // Baud rate divisor registers
+
+// Line Control Register Values
+#define ULCON_WL5     (0x00000000 << 0)  // Word length 5
+#define ULCON_WL6     (0x00000001 << 0)  // Word length 6
+#define ULCON_WL7     (0x00000002 << 0)  // Word length 7
+#define ULCON_WL8     (0x00000003 << 0)  // Word length 8
+#define ULCON_STB1    (0x00000000 << 2)  // One stop bit
+#define ULCON_STB2    (0x00000001 << 2)  // Two stop bits
+#define ULCON_PMDOFF  (0x00000000 << 3)  // No parity
+#define ULCON_PMDODD  (0x00000004 << 3)  // Odd parity
+#define ULCON_PMDEVEN (0x00000005 << 3)  // Even parity
+#define ULCON_PMDFC1  (0x00000006 << 3)  // Parity forced/checked as 1
+#define ULCON_PMDFC0  (0x00000007 << 3)  // Parity forced/checked as 0
+#define ULCON_SCI     (0x00000000 << 6)  // Internal clock
+#define ULCON_SCE     (0x00000001 << 6)  // External clock
+#define ULCON_IROFF   (0x00000000 << 7)  // Normal mode
+#define ULCON_IRON    (0x00000001 << 7)  // IR mode
+
+// Control Register Values
+#define UCON_RXMOFF   (0x00000000 << 0)  // Disable Rx mode
+#define UCON_RXMINT   (0x00000001 << 0)  // Interrupt request Rx mode
+#define UCON_RXMDMA0  (0x00000002 << 0)  // GDMA channel 0 request Rx mode
+#define UCON_RXMDMA1  (0x00000003 << 0)  // GDMA channel 1 request Rx mode
+#define UCON_RXSIOFF  (0x00000000 << 2)  // Rx status interrupt disabled
+#define UCON_RXSION   (0x00000001 << 2)  // Rx status interrupt enabled
+#define UCON_TXMOFF   (0x00000000 << 3)  // Disable Tx mode
+#define UCON_TXMINT   (0x00000001 << 3)  // Interrupt request Tx mode
+#define UCON_TXMDMA0  (0x00000002 << 3)  // GDMA channel 0 request Tx mode
+#define UCON_TXMDMA1  (0x00000003 << 3)  // GDMA channel 1 request Tx mode
+#define UCON_DSROFF   (0x00000000 << 5)  // Data set ready output off
+#define UCON_DSRON    (0x00000001 << 5)  // Data set ready output on
+#define UCON_SBKOFF   (0x00000000 << 6)  // No break sent
+#define UCON_SBKON    (0x00000001 << 6)  // Break sent
+#define UCON_LPBOFF   (0x00000000 << 7)  // Loop back mode off// Baud rate divisor registers
+#define UCON_LPBON    (0x00000001 << 7)  // Loop back mode on^M
+
+// Status Register Values
+#define USTAT_OV      (0x00000001 << 0)  // Overrun error
+#define USTAT_PE      (0x00000001 << 1)  // Parity error
+#define USTAT_FE      (0x00000001 << 2)  // Frame error
+
+#define USTAT_BKD     (0x00000001 << 3)  // Break detect
+#define USTAT_DTR     (0x00000001 << 4)  // Data terminal ready
+#define USTAT_RDR     (0x00000001 << 5)  // Receive data ready
+#define USTAT_TBE     (0x00000001 << 6)  // Transmit buffer register empty
+#define USTAT_TC      (0x00000001 << 7)  // Transmit complete
+
+// Baud rate divisor registers
+#define UBRDIV_50     ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/50)-1)<<4)|1)
+#define UBRDIV_75     ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/75)-1)<<4)|1)
+#define UBRDIV_110    ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/110)-1)<<4)|1)
+#define UBRDIV_134_5  ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/8/269)-1)<<4)|1)
+#define UBRDIV_150    ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/150)-1)<<4)|1)
+#define UBRDIV_200    ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/200)-1)<<4)|1)
+#define UBRDIV_300    ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/16/16/300)-1)<<4)|1)
+#define UBRDIV_600    ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/600)-1)<<4)|0)
+#define UBRDIV_1200   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/1200)-1)<<4)|0)
+#define UBRDIV_1800   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/1800)-1)<<4)|0)
+#define UBRDIV_2400   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/2400)-1)<<4)|0)
+#define UBRDIV_3600   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/3600)-1)<<4)|0)
+#define UBRDIV_4800   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/4800)-1)<<4)|0)
+#define UBRDIV_7200   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/7200)-1)<<4)|0)
+#define UBRDIV_9600   ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/9600)-1)<<4)|0)
+#define UBRDIV_14400  ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/14400)-1)<<4)|0)
+#define UBRDIV_19200  ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/19200)-1)<<4)|0)
+#define UBRDIV_38400  ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/38400)-1)<<4)|0)
+#define UBRDIV_57600  ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/57600)-1)<<4)|0)
+#define UBRDIV_115200 ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/115200)-1)<<4)|0)
+#define UBRDIV_230400 ((((CYGNUM_HAL_ARM_S3C4510_CLOCK_SPEED/2/1/16/230400)-1)<<4)|0)
+
+// Arrays used for conversion of eCos serial driver
+// configuration parameters to parameters for S3C4510
+
+static cyg_uint32 select_word_length[] = {
+    ULCON_WL5,    // 5 bits / word (char)
+    ULCON_WL6,
+    ULCON_WL7,
+    ULCON_WL8
+};
+
+static cyg_uint32 select_stop_bits[] = {
+    ULCON_STB1,    // 1 stop bit
+    U_NOT_SUPP,    // 1.5 stop bit not supported
+    ULCON_STB2     // 2 stop bits
+};
+
+static cyg_uint32 select_parity[] = {
+    ULCON_PMDOFF,     // No parity
+    ULCON_PMDEVEN,    // Even parity
+    ULCON_PMDODD,     // Odd parity
+    ULCON_PMDFC1,     // Mark parity
+    ULCON_PMDFC0,     // Space parity
+};
+
+static cyg_uint32 select_baud[] = {
+     UBRDIV_50,     // 50
+     UBRDIV_75,     // 75
+     UBRDIV_110,    // 110
+     UBRDIV_134_5,  // 134.5
+     UBRDIV_150,    // 150
+     UBRDIV_200,    // 200
+     UBRDIV_300,    // 300
+     UBRDIV_600,    // 600
+     UBRDIV_1200,   // 1200
+     UBRDIV_1800,   // 1800
+     UBRDIV_2400,   // 2400
+     UBRDIV_3600,   // 3600
+     UBRDIV_4800,   // 4800
+     UBRDIV_7200,   // 7200
+     UBRDIV_9600,   // 9600
+     UBRDIV_14400,  // 14400
+     UBRDIV_19200,  // 19200
+     UBRDIV_38400,  // 38400
+     UBRDIV_57600,  // 57600
+     UBRDIV_115200, // 115200
+     UBRDIV_230400, // 230400
+};
+
+#endif // CYGONCE_ARM_S3C4510_SERIAL_H
+
+// EOF s3c4510_serial.h