#ifndef CYGONCE_HAL_HAL_ARCH_H
#define CYGONCE_HAL_HAL_ARCH_H

//==========================================================================
//
//      hal_arch.h
//
//      Architecture specific abstractions
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    msalter
// Contributors: msalter
// Date:         2001-02-17
// Purpose:      Define architecture abstractions
// Usage:        #include <cyg/hal/hal_arch.h>
//              
//####DESCRIPTIONEND####
//
//==========================================================================

#ifndef __ASSEMBLER__
#include <pkgconf/hal.h>
#include <cyg/infra/cyg_type.h>

#include <cyg/hal/var_arch.h>

//--------------------------------------------------------------------------
// Processor saved states:
// The layout of this structure is also defined in "arch.inc", for assembly
// code. Do not change this without changing that (or vice versa).
// Notes: This structure is carefully laid out. It is a multiple of 8
// bytes and the pc and badvr fields are positioned to ensure that
// they are on 8 byte boundaries. 


typedef struct 
{
    CYG_WORD16    vector;
    CYG_WORD32    spc_fiq;
    CYG_WORD32    spc_irq;
    CYG_WORD16    ssr_fiq;
    CYG_WORD16    ssr_irq;
    CYG_WORD16    ssr_swi;
    CYG_WORD16    r[8];
    CYG_WORD32    a[8];
} HAL_SavedRegisters;

//--------------------------------------------------------------------------
// Exception handling function.
// This function is defined by the kernel according to this prototype. It is
// invoked from the HAL to deal with any CPU exceptions that the HAL does
// not want to deal with itself. It usually invokes the kernel's exception
// delivery mechanism.

externC void cyg_hal_deliver_exception( CYG_WORD code, CYG_ADDRWORD data );

//--------------------------------------------------------------------------
// Bit manipulation macros

externC cyg_uint32 hal_lsbit_index(cyg_uint32 mask);
externC cyg_uint32 hal_msbit_index(cyg_uint32 mask);

#define HAL_LSBIT_INDEX(index, mask) index = hal_lsbit_index(mask);

#define HAL_MSBIT_INDEX(index, mask) index = hal_msbit_index(mask);

//--------------------------------------------------------------------------
// Context Initialization

// Optional FPU context initialization
#define HAL_THREAD_INIT_FPU_CONTEXT( _regs_, _id_ )

// Initialize the context of a thread.
// Arguments:
// _sparg_ name of variable containing current sp, will be written with new sp
// _thread_ thread object address, passed as argument to entry point
// _entry_ entry point address.
// _id_ bit pattern used in initializing registers, for debugging.
#define HAL_THREAD_INIT_CONTEXT( _sparg_, _thread_, _entry_, _id_ )                     \
{                                                                                       \
}

//--------------------------------------------------------------------------
// Context switch macros.
// The arguments are pointers to locations where the stack pointer
// of the current thread is to be stored, and from where the sp of the
// next thread is to be fetched.

externC void hal_thread_switch_context( CYG_ADDRESS to, CYG_ADDRESS from );
externC void hal_thread_load_context( CYG_ADDRESS to )
    __attribute__ ((noreturn));

#define HAL_THREAD_SWITCH_CONTEXT(_fspptr_,_tspptr_)                    \
        hal_thread_switch_context( (CYG_ADDRESS)_tspptr_,               \
                                   (CYG_ADDRESS)_fspptr_);

#define HAL_THREAD_LOAD_CONTEXT(_tspptr_)                               \
        hal_thread_load_context( (CYG_ADDRESS)_tspptr_ );

//--------------------------------------------------------------------------
// Execution reorder barrier.
// When optimizing the compiler can reorder code. In multithreaded systems
// where the order of actions is vital, this can sometimes cause problems.
// This macro may be inserted into places where reordering should not happen.
// The "memory" keyword is potentially unnecessary, but it is harmless to
// keep it.

#define HAL_REORDER_BARRIER() asm volatile ( "" : : : "memory" )

//--------------------------------------------------------------------------
// Breakpoint support
// HAL_BREAKPOINT() is a code sequence that will cause a breakpoint to
// happen if executed.
// HAL_BREAKINST is the value of the breakpoint instruction and
// HAL_BREAKINST_SIZE is its size in bytes.
// HAL_BREAKINST_TYPE is the type.

#define HAL_BREAKPOINT(_label_)                 \
asm volatile (" .globl  _" #_label_ "\n"        \
              "_" #_label_":"                   \
              " break\n"                        \
    );

#define HAL_BREAKINST           0x9e99
#define HAL_BREAKINST_SIZE      2
#define HAL_BREAKINST_TYPE      cyg_uint16

//--------------------------------------------------------------------------
// Thread register state manipulation for GDB support.

// Default to a 32 bit register size for GDB register dumps.
#ifndef CYG_HAL_GDB_REG
#define CYG_HAL_GDB_REG CYG_WORD32
#endif

// Translate a stack pointer as saved by the thread context macros above into
// a pointer to a HAL_SavedRegisters structure.
#define HAL_THREAD_GET_SAVED_REGISTERS( _sp_, _regs_ )          \
        (_regs_) = (HAL_SavedRegisters *)(_sp_)

// Copy a set of registers from a HAL_SavedRegisters structure into a
// GDB ordered array.    
#define HAL_GET_GDB_REGISTERS( _aregval_ , _regs_ )             \
{                                                               \
    CYG_HAL_GDB_REG *_regval_ = (CYG_HAL_GDB_REG *)(_aregval_); \
    int _i_;                                                    \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        _regval_[_i_] = ((CYG_WORD32)((_regs_)->r[_i_])) << 16; \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        _regval_[_i_+8] = ((_regs_)->a[_i_]) << 16;             \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        _regval_[_i_+16] = ((_regs_)->a[_i_]) & 0xffff0000UL;   \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        _regval_[_i_+24] = (_regs_)->a[_i_];                    \
                                                                \
    _regval_[REG_SSR_FIQ] = ((CYG_WORD32)((_regs_)->ssr_fiq)) << 16; \
    _regval_[REG_SSR_IRQ] = ((CYG_WORD32)((_regs_)->ssr_irq)) << 16; \
    _regval_[REG_SSR_SWI] = ((CYG_WORD32)((_regs_)->ssr_swi)) << 16; \
    _regval_[REG_SPC_FIQ] = (_regs_)->spc_fiq;                  \
    _regval_[REG_SPC_IRQ] = (_regs_)->spc_irq;                  \
    switch ((_regs_)->vector) {                                 \
      case CYGNUM_HAL_VECTOR_SWI:                               \
        _regval_[REG_SR] = _regval_[REG_SSR_SWI];               \
        _regval_[REG_PC] = (_regs_)->a[6]; break;               \
      case CYGNUM_HAL_VECTOR_FIQ:                               \
        _regval_[REG_SR] = _regval_[REG_SSR_FIQ];               \
        _regval_[REG_PC] = (_regs_)->spc_fiq; break;            \
      default:                                                  \
        _regval_[REG_SR] = _regval_[REG_SSR_IRQ];               \
        _regval_[REG_PC] = (_regs_)->spc_irq; break;            \
    }                                                           \
}

// Copy a GDB ordered array into a HAL_SavedRegisters structure.
#define HAL_SET_GDB_REGISTERS( _regs_ , _aregval_ )             \
{                                                               \
    CYG_HAL_GDB_REG *_regval_ = (CYG_HAL_GDB_REG *)(_aregval_); \
    int _i_;                                                    \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        (_regs_)->r[_i_] = _regval_[_i_] >> 16;                 \
                                                                \
    for( _i_ = 0; _i_ < 8; _i_++ )                              \
        (_regs_)->a[_i_] = _regval_[_i_+24];                    \
                                                                \
    (_regs_)->ssr_fiq = _regval_[REG_SSR_FIQ] >> 16;            \
    (_regs_)->ssr_irq = _regval_[REG_SSR_IRQ] >> 16;            \
    (_regs_)->ssr_swi = _regval_[REG_SSR_SWI] >> 16;            \
    (_regs_)->spc_fiq = _regval_[REG_SPC_FIQ];                  \
    (_regs_)->spc_irq = _regval_[REG_SPC_IRQ];                  \
    switch (__get_trap_number()) {                              \
      case CYGNUM_HAL_VECTOR_SWI:                               \
        (_regs_)->ssr_swi = _regval_[REG_SR] >> 16;             \
        (_regs_)->a[6] = _regval_[REG_PC]; break;               \
      case CYGNUM_HAL_VECTOR_FIQ:                               \
        (_regs_)->ssr_fiq = _regval_[REG_SR] >> 16;             \
        (_regs_)->spc_fiq = _regval_[REG_PC]; break;            \
      default:                                                  \
        (_regs_)->ssr_irq = _regval_[REG_SR] >> 16;             \
        (_regs_)->spc_irq = _regval_[REG_PC]; break;            \
    }                                                           \
}

#define CYGARC_HAL_GET_PC_REG(_regs_, _val_)                    \
{                                                               \
    switch ((_regs_)->vector) {                                 \
      case CYGNUM_HAL_VECTOR_SWI:                               \
        (_val_) = (_regs_)->a[6]; break;                        \
      case CYGNUM_HAL_VECTOR_FIQ:                               \
        (_val_) = (_regs_)->spc_fiq; break;                     \
      default:                                                  \
        (_val_) = (_regs_)->spc_irq; break;                     \
    }                                                           \
}

//--------------------------------------------------------------------------
// HAL setjmp
// Note: These definitions are repeated in context.S. If changes are
// required remember to update both sets.

#define CYGARC_JMP_BUF_R4        0
#define CYGARC_JMP_BUF_R5        2
#define CYGARC_JMP_BUF_A12       4
#define CYGARC_JMP_BUF_A13       8
#define CYGARC_JMP_BUF_A14      12
#define CYGARC_JMP_BUF_A15      16

#define CYGARC_JMP_BUF_SIZE     20

typedef cyg_uint16 hal_jmp_buf[CYGARC_JMP_BUF_SIZE/sizeof(cyg_uint16)];

externC int hal_setjmp(hal_jmp_buf env);
externC void hal_longjmp(hal_jmp_buf env, int val);

//-------------------------------------------------------------------------
// Idle thread code.
// This macro is called in the idle thread loop, and gives the HAL the
// chance to insert code. Typical idle thread behaviour might be to halt the
// processor.

externC void hal_idle_thread_action(cyg_uint32 loop_count);

#define HAL_IDLE_THREAD_ACTION(_count_) hal_idle_thread_action(_count_)

//--------------------------------------------------------------------------
// Minimal and sensible stack sizes: the intention is that applications
// will use these to provide a stack size in the first instance prior to
// proper analysis.  Idle thread stack should be this big.

//    THESE ARE NOT INTENDED TO BE MICROMETRICALLY ACCURATE FIGURES.
//           THEY ARE HOWEVER ENOUGH TO START PROGRAMMING.
// YOU MUST MAKE YOUR STACKS LARGER IF YOU HAVE LARGE "AUTO" VARIABLES!

// This is not a config option because it should not be adjusted except
// under "enough rope" sort of disclaimers.

// Typical case stack frame size: return link + 4 pushed registers + some locals.
#define CYGNUM_HAL_STACK_FRAME_SIZE (48)

// Stack needed for a context switch:
#define CYGNUM_HAL_STACK_CONTEXT_SIZE ((32+10)*CYG_HAL_MIPS_REG_SIZE)

// Interrupt + call to ISR, interrupt_end() and the DSR
#define CYGNUM_HAL_STACK_INTERRUPT_SIZE (4+2*CYGNUM_HAL_STACK_CONTEXT_SIZE) 

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK

// An interrupt stack which is large enough for all possible interrupt
// conditions (and only used for that purpose) exists.  "User" stacks
// can be much smaller

#define CYGNUM_HAL_STACK_SIZE_MINIMUM (CYGNUM_HAL_STACK_CONTEXT_SIZE+      \
                                       CYGNUM_HAL_STACK_INTERRUPT_SIZE*2+  \
                                       CYGNUM_HAL_STACK_FRAME_SIZE*8)
#define CYGNUM_HAL_STACK_SIZE_TYPICAL (CYGNUM_HAL_STACK_SIZE_MINIMUM+1024)

#else // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK 

// No separate interrupt stack exists.  Make sure all threads contain
// a stack sufficiently large.

#define CYGNUM_HAL_STACK_SIZE_MINIMUM (4096)
#define CYGNUM_HAL_STACK_SIZE_TYPICAL (4096)

#endif

#endif /* __ASSEMBLER__ */


//--------------------------------------------------------------------------
// Macros for switching context between two eCos instances (jump from
// code in ROM to code in RAM or vice versa).
#define CYGARC_HAL_SAVE_GP()
#define CYGARC_HAL_RESTORE_GP()

//--------------------------------------------------------------------------
// Defines for status register bit access

#define CYGARC_SR_PM   (1<<6)
#define CYGARC_SR_TE   (1<<2)
#define CYGARC_SR_IE   (1<<1)
#define CYGARC_SR_FE   (1<<0)

//--------------------------------------------------------------------------
#endif // CYGONCE_HAL_HAL_ARCH_H
// End of hal_arch.h
