1999-10-05  Nick Garnett  <nickg@cygnus.co.uk>

	* include/basetype.h: Made definition of CYG_BYTEORDER dependent
	on definition of CYGPKG_HAL_MIPS_[L|M]SBFIRST.

1999-09-17  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/vectors.S (__default_exception_vsr):
	Rename exception_handler()->cyg_hal_exception_handler()
	After all, we will just do a jump rather than a jal into
	cyg_hal_exception_handler()
	(restore_state): Make the change below (by Hugo) be conditional
	on CYG_HAL_USE_ROM_MONITOR_CYGMON.
	Add explanatory comment about the additions for Cygmon

	* src/hal_misc.c (hal_default_isr): Use new format HAL_DIAG_IRQ_CHECK()
	and check return code is negative; if so, return
	(cyg_hal_exception_handler): Rename from exception_handler()
	Now return cyg_uint32, but default to returning 0 always

1999-09-16  Hugo Tyson  <hmt@cygnus.co.uk>

	This set of changes with matching ones in jmr3904 comes from Mark
	Salter's work to make jmr3904 CygMon talk Ethernet.
	
	* src/vectors.S (restore_state): Call CygMon for exceptions or
	unhandled interrupts if CYG_HAL_USE_ROM_MONITOR.  This is why the
	return value from the ISR is preserved.  Don't fully understand
	this.

	* src/hal_misc.c (hal_default_isr): Call into hal_diag via
	HAL_DIAG_IRQ_CHECK if it's defined and CYG_HAL_USE_ROM_MONITOR.
	This lets CygMon check for network interrupts &c.

1999-09-09  Nick Garnett  <nickg@cygnus.co.uk>

	* include/arch.inc:
	Moved code to initialize cache out to variant header since it is
	variant specific.

1999-09-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (exception_handler): Catch exceptions that come from
	within GDB stubs and return if that's what the stubs intend

1999-08-19  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_io.h: Added include of plf_io.h.

1999-08-10  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/mipsfp.c (cyg_hal_mips_process_fpe): CYG_REPORT_FUNCNAMETYPE()
	must be first in a C file

1999-07-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/arch.inc (hal_fpu_save_caller): Save fcr31 first as
	recommended by user's manual
	(hal_fpu_load_caller): Similarly restore fcr31 last

	Rename CYG_HAL_MIPS_FSR_INIT to CYG_HAL_MIPS_FCSR_INIT since that's
	closer to its documented name

	* include/mips-regs.h: 
	Add floating point register definitions, and bitfields/masks for FCR31
	in particular

	* src/mips-stub.c (__single_step):
	Enable FP branch support if the hardware has an FPU.

	Change register access to FCR using HAL macro names from mips-regs.h

	When comparing branch tests with 0, cast the result of get_register()
	to int so that it works on 64-bit MIPS targets even in 32-bit mode,
	when GDB still insists REG_SIZE must be 8 (in which case negative
	results would otherwise go positive)
	
	* src/mipsfp.c: New file to emulate unimplemented MIPS FP operations
	* src/PKGconf.mak (COMPILE): compile it

	* src/hal_misc.c (exception_handler): If we have an FPU and get an FP
	exception, call cyg_hal_mips_process_fpe() from mipsfp.c to process
	it


1999-07-09  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/mips.inc:
	* include/arch.inc:
	* src/vectors.S:
	Rename "cache" register to "cachectrl" to prevent confusion with
	the "cache" instruction.
	For symmetry therefore also rename mipsreg_cache to mipsreg_cachectrl

	* include/arch.inc (hal_cache_init):
	Invalidate caches at startup

	* include/hal_cache.h:
	Allow cache invalidation when cache disabled
	Add _HAL_ASM_SET_MIPS_ISA() to allow use of cache macros in code
	compiled with a MIPS ISA below 3

1999-06-25  Nick Garnett  <nickg@cygnus.co.uk>

	* include/arch.inc:
	* include/hal_arch.h:
	Added initializer for FPU FSR register.

1999-06-22  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c (hal_default_isr): When chaining, always try the
	ctrlc ISR, the passed-in vector number can be bogus.

1999-06-18  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Added cyg_hal_clock_period variable.	
	
	* include/hal_intr.h:
	Modified HAL_CLOCK_LATENCY() macro to do the right thing.
	Added cyg_hal_clock_period variable.	

	* include/hal_cache.h: Modified implementations of cache macros to
	only do anything if the appropriate cache is enabled.

1999-06-17  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Added code to discriminate different entry
	conditions to the reset vector. Added code to translate an NMI
	into a standard exception and added a new vector in the VSR table
	for it.
	Made above code not be present in RAM. Tidied away some debug
	code.

1999-06-11  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c: Make sure all symbol addresses are given an
	appropriate type that they won't be relocated relative to $gp
	Fix for CR 100800
	
1999-06-10  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h: Added macros to copy FPU registers between
	HAL and GDB register save states.

1999-06-08  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Dummy __gccmain did not have a delay slot after
	the "jr ra".

	* include/hal_arch.h: Make value of CYGNUM_HAL_STACK_SIZE_TYPICAL
	always be greater than CYGNUM_HAL_STACK_SIZE_MINIMUM.

1999-06-02  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_invoke_constructors): 
	Rework for new constructor scheme for new compilers. Should work
	with old compilers too.

1999-05-28  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Removed references to CYG_HAL_STARTUP_STUBS.
	Removed some defunct code.

	* include/hal_cache.h (HAL_ICACHE_INVALIDATE_ALL): Fixed typo.

1999-05-27  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Move call to hal_diag_intr_start to a more useful place.
	Added a save of the current state pointer to memory for ctrl-c
	support. Ensure that exceptions are enabled before calling the ISR
	to allow breakpoints to function.

	* src/mips-stub.c: Imported asynchronous interrupt support from
	libstub/cygmon.

	* include/hal_intr.h: Added HAL_DEFAULT_ISR to contain the name of
	the default ISR.

	* src/hal_misc.c: Added code to call HAL_CTRLC_ISR to default ISR
	if it is enabled. Added some (disabled) debug code.

	* include/hal_cache.h: Added default implementation of
	HAL_DCACHE_IS_ENABLED(). Made use of it in some cache macros.
	Also fixed some typos in some macros.

1999-05-21  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_intr.h: Define HAL_INTERRUPT_STACK_BASE and
	HAL_INTERRUPT_STACK_TOP so that stack usage macros in
	kernel/.../stackmon.hxx can work.

	* src/vectors.S (cyg_interrupt_stack_base): Define this symbol for
	the interrupt stack and its friend for the stack top so that we
	can publish them with nice names.

1999-05-21  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: 
	Rationalized use of "at" and "noat" setting.
	Made use of "lar" where necessary.
	
	* src/mips-stub.c (__install_breakpoints): Added cache flushes to
	ensure that the just-set breakpoint is migrated to main memory and
	will be fetched by the instruction cache.

	* src/context.S:
	Rationalized use of "at" and "noat" setting.

	* include/arch.inc:
	Added initial value for the config0 register and added code to set
	it to hal_cpu_init.
	Added default "lar" macro.

1999-05-16  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_intr.h (HAL_INTERRUPT_STACK_CALL_PENDING_DSRS): 
	Add macro for new DSR handling mechanism (was override of a
	"weak" symbol in kernel).	

1999-05-13  Nick Garnett  <nickg@cygnus.co.uk>
	The following have been merged from a branch:
	
    1999-05-11  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h: 
	* include/hal_intr.h: 
	* include/hal_cache.h: 
	* include/arch.inc:
	Changed references to "imp" and "implementation" to "var" and
	"variant" respectively. These are better names for these files and
	functions.

	* src/vectors.S: 
	Removed or disabled some development/debug code.
	Same imp->var changes as above.
	
    1999-05-06  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Added call to hal_cpu_except_enable in
	__default_exception_vsr to re-enable nested exceptions.

	* src/mips-stub.c: Use _registers[X] rather that register[X] for
	accessing CPU registers, since the former may point to per-thread
	register sets while the latter only refers to the current trap
	register set.

	* include/arch.inc: Added hal_cpu_except_enable macro to
	(re-)enable exception processing and disable interrupts. This is
	necessary if we are to allow nested exceptions (like breakpoints
	in exception handlers).

    1999-04-29  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Reenable interrupts while processing exceptions.
	Several temporary kludges to permit us to test ROM code from RAM
	under PMON.

	* include/mips.inc: Extended list of CP0 register aliases.

	
	* include/arch.inc: Added generic version of hal_cache_init to
	disable kseg0 caching in config0 register.

	* include/hal_cache.h: Moved dummy addresses used in index
	operations to 0x80000000, zero caused MMU exceptions.
	Fixed looping bugs in all macros that use them.

    1999-04-28  Gary Thomas  <gthomas@cygnus.co.uk>

	[v1_2_2_beta branch]
	* src/vectors.S: Add dummy "__gccmain()"

    1999-04-27  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h: Make minimum stack sizes more realistic.
	Also fix size of interrupt stack frame when FPU present.

    1999-04-23  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Added support for floating point register save
	and restore. Fixed hal_interrupt_stack_call_pending_DSRs to use
	hal_cpu_int_merge macro.

	* src/context.S: Added support for floating point register save
	and restore. Started some preparations for 64 bit processor
	support.

	* include/mips.inc: Added floating point register aliases. Moved
	saved state to arch.inc.

	* include/hal_arch.h: Completed support for floating point state
	save and restore. Parameterized GDB support macros a little to
	enable GDB to work properly.

	* include/arch.inc: Added support for floating point state save
	and restore. Moved assembler version of saved state layout here
	from mips.inc.

    1999-04-22  Nick Garnett  <nickg@cygnus.co.uk>

	* src/context.S (hal_thread_load_context): Substituted explicit
	code to reload the interrupt enable state with a macro.

	* include/hal_cache.h: Removed default implementations of
	HAL_[D/I]CACHE_[EN/DIS]ABLE since these were actually TX39
	specific. There is aparrently no standard way of implementing
	these function in the MIPS architecture.

	* include/mips.inc: Added a comment to point out a TX39-only
	register.
	
	* src/vectors.S: Modified hal_interrupt_stack_call_pending_DSRs()
	to also call DSRs with interrupts enabled. Returns interrupt state
	to original value when finished.
	Use hal_cpu_int_ensable macro in place of explicit code in
	hal_interrupt_stack_call_pending_DSRs().

    1999-04-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/arch.inc: Ifdeffed definition of hal_intc_init macro to
	allow it to be defined elsewhere. Added default versions of diag
	macros.

	* src/vectors.S: Added some low-level diagnostic macros to show
	HAL events if there is adequate hardware (such as leds).
	Removed interrupt enable/disables in interrupt processing since we
	can now go through a thread switch with interrupts disabled.
	Ifdeffed ISR tables so they can be defined elsewhere.
	Added implementation of hal_interrupt_stack_call_pending_DSRs.
	Added calls to implementation and platform init routines.
	
	* src/hal_misc.c: Many changes to hal_idle_thread_action() to
	print or instrument various CPU registers. Left with code to
	wiggle an led in the idle loop.
	Stripped out TX39 specific code and moved it to plf_misc.c.
	
	* src/context.S: Added code to save and restore the interrupt mask
	state in thread contexts.

	* include/hal_intr.h:
	Renamed default interrupts to match the hardware more closely.
	Added ifdef around HAL_TRANSLATE_VECTOR() so it can be made
	platform/variant specific. Added implementation of
	HAL_INTERRUPT_ACKNOWLEDGE().

	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Aligned the
	intitial stack pointer to 16 byte boundary, added an initial value
	for the status register.

	* include/arch.inc: Added some nops to eret macros.

    1999-04-13  John Dallaway  <jld@cygnus.co.uk>

	* src/mips.ld: Migrate global MIPS linker script to individual
	MIPS variant directories

1999-04-30  Hugo Tyson  <hmt@cygnus.co.uk>

	Merge the following changes from the 1.2.1 release branch,
	but without any CDL for CYGDBG_HAL_MIPS_INSTALL_CTRL_C_ISR,
	it is always on.

    1999-04-30  Jesper Skov  <jskov@cygnus.co.uk>
	* src/hal_misc.c: Added vector decoding to the below.
    1999-04-30  Hugo Tyson  <hmt@masala.cygnus.co.uk>
	* src/hal_misc.c (hal_init_ctrlc_intr): Chain onto the old value
	of the ISR when attaching the ctrl-c ISR; this allows chained
	interrupts to work (otherwise a stack-wrecking interrupt loop
	occurs).
    1999-04-29  Hugo Tyson  <hmt@cygnus.co.uk>
	* include/pkgconf/hal_tx39.h (CYGDBG_HAL_MIPS_INSTALL_CTRL_C_ISR): 
	New config option, on by default.
	* src/hal_misc.c (hal_ctrlc_isr): Enable these features on
	CYGDBG_HAL_MIPS_INSTALL_CTRL_C_ISR new config option.

1999-04-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak:
	Remove the -n argument to tail, it does not appear to be required
	on any supported host and causes problems with some
	implementations of tail.

1999-04-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_intr.h: Don't sync TRR if platform sim - it doesn't need
	it

	* include/pkgconf/hal_tx39.h: 
	Allow CYGARC_TX39_PR19846 to override
	CYGHWR_HAL_MIPS_TX3904_TRR_REQUIRES_SYNC so that we can do something
	sensible in the simulators
	
	Related to PR 19846

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/tx39.ld: Define __bss_end at the end of the BSS
	* src/hal_misc.c (hal_zero_bss): Stop at __bss_end rather than _end
	when clearing BSS
	These fix PR 19750

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c:
	* src/vectors.S:
	Separate parts of cyg_hal_invoke_constructors() out into new functions
	cyg_hal_enable_caches() and cyg_hal_debug_init() so that
	cyg_hal_invoke_constructors() can be called again safely if
	necessary
	Related fix to that of PR19642

1999-04-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/PKGconf.mak (EXTRAS): Don't generate extras.o here any more
	But do define EXTRAS every time for the linker script

1999-04-13  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_intr.h (HAL_CLOCK_READ): 
	Add workaround for tx39 bug - needs to sync and wait for the
	write buffer to clear before reading the clock.
	Submitted by akira.yokosawa@toshiba.co.jp

	* include/pkgconf/hal_tx39.h
	(CYGHWR_HAL_MIPS_TX3904_TRR_REQUIRES_SYNC): Define this by default
	to implement above

1999-04-12  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_intr.h (HAL_VSR_SET_TO_ECOS_HANDLER): Added.
	(HAL_VSR_SET): Cast types to CYG_ADDRESS to prevent warnings

	Part of fix for PRs 19731/19607

1999-04-09  Jesper Skov  <jskov@cygnus.co.uk>

	* src/mips-stub.c: 
	Moved get_register and put_register to hal_stub.c.

1999-04-08  John Dallaway  <jld@cygnus.co.uk>

	* src/*.ld: Use double underscore substitution for period
	character in SECTION_* macro names (PR 19787)

1999-04-08  John Dallaway  <jld@cygnus.co.uk>

	* src/*.ld: Revised SECTION_* macro arguments to
	avoid padded output sections (PR 19787)

1999-03-31  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h: Added include of hal.h and a test that a
	valid set of macros have been added.
	Also moved address used in HAL_DCACHE_INVALIDATE_ALL() to
	0x9fc00000, which is the cached ROM space.

1999-03-24  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Added options to allow different settings for DRAM initialization.
	Fixed some ifdef bugs. 

	* src/hal_misc.c (cyg_hal_invoke_constructors):
	Added ifdefs to control enabling and disabling of timeout
	exceptions.

	* include/pkgconf/hal_tx39.h:
	Added translations from the user friendly CPU speed settings into
	the real CPU frequencies in Hz.

	* include/hal_intr.h:
	Added HAL_TX39_DEBUG_TOE_ENABLE() and ...DISABLE, to switch
	timeout exceptions on and off.

1999-03-23  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h:
	Modified stack size definitions to be more accurate.

1999-03-22  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/mips-regs.h: Update copyright

	* include/mips-stub.h: Update copyright

	* src/mips-stub.c: Update copyright

1999-03-22  Hugo Tyson  <hmt@cygnus.co.uk>

	* include/hal_arch.h: 
	Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of
	CYGNUM_HAL_MINIMUM_STACK_SIZE.

1999-03-17  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_user_break): Remove #warning - it doesn't
	really provide any useful info, and may unnecessarily worry a user
	since it fires in normal situations

1999-03-17  John Dallaway  <jld@cygnus.co.uk>

	* src/PKGconf.mak: Remove dependence on echo '-e' switch.

1999-03-16  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Removed definition of idle thread stack. 

1999-03-15  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h:
	Changed implementation of HAL_DCACHE_INVALIDATE_ALL() to read from
	ROM space rather than RAM. This fixes PR 19510.

1999-03-12  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S: Modified ROMC and SCS settings in line with
	Toshiba's suggestions for compatibility with other CPU variants.

1999-03-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_arch.h: Add definition for 'CYGNUM_HAL_MINIMUM_STACK_SIZE'

1999-03-11  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Disabled use of stand-alone ^C detection interrupt. This is now
	done in the serial driver. Added cyg_hal_is_break() and
	cyg_hal_user_break() to detect and provoke ^C processing. These
	are used by the serial driver and will one day interact with the
	BSP/Cygmon/GDB stubs to do the right thing.

1999-03-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h (HAL_INTERRUPT_IN_USE): Added.

1999-03-10  Nick Garnett  <nickg@cygnus.co.uk>

	* include/pkgconf/hal_tx39.h: 
	* src/vectors.S:
	Changed names used to control CPU frequency into something more
	generic. Moved definition into hal_tx39.h from hal_tx39_jmr3904.h.

1999-03-09  Jesper Skov  <jskov@cygnus.co.uk>
        PR 19370
	* src/hal_misc.c (cyg_hal_invoke_constructors): Changed
	constructor loop.

1999-03-05  Gary Thomas  <gthomas@cygnus.co.uk>

	* src/tx39.ld: 
	* src/PKGconf.mak: Clean up I/O package changes.

1999-03-04  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/tx39.ld: 
	Add INPUT(libextras.a), include libextras.a in GROUP() and include 
	new __DEVTAB__ section for new device drivers

1999-02-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Changed label used to access scheduler lock to one that is not
	mangled by C++. This is intended to make support for interrupt
	handling in non-kernel configurations easier.
	Added some code to initialize DRAM in ROM-only configurations.

1999-02-23  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c: 
	Added support for SIGINT-causing magic breakpoint. This involves
	passing a third, hidden argument to hal_ctrlc_isr() which is a
	pointer to the saved CPU state.
	
	* src/vectors.S:
	Added support for 66MHz part (untested).
	Added support for SIGINT-causing magic breakpoint to allow
	continuation after ^C. This also relies on CYGMON changes.

1999-02-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/hal_arch.h: 
	Rename deliver_exception() -> cyg_hal_deliver_exception()
	QA improvements

	* include/hal_intr.h:
	Reorganise vector/interrupt/exception names according to purpose
	QA improvements

	* src/hal_misc.c:
	Rename deliver_exception() -> cyg_hal_deliver_exception()
	Rename CYG_VECTOR_SIO_0 -> CYGNUM_HAL_INTERRUPT_SIO_0

1999-02-16  Jesper Skov  <jskov@cygnus.co.uk>

	* src/vectors.S: Added call to initialize_stub.

	* src/mips-stub.c: 
	* include/mips-stub.h:
	Cleaned up to only include arch specific stub code.

	* include/hal_arch.h (HAL_BREAKPOINT): Added SIM breakpoint code
	from (now dead) jmr3904/.../hal_stub.c.

1999-02-05  John Dallaway  <jld@cygnus.co.uk>

	* src/mips.ld: Rename to tx39.ld since this is the target name
        * src/PKGconf.mak: Process tx39.ld instead of mips.ld

1999-02-05  John Dallaway  <jld@cygnus.co.uk>

	* src/mips.ld: Add LMA_EQ_VMA macro definition.

1999-02-03  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: 
	* include/hal_cache.h:
	Moved nested external declarations into top-level scope to avoid
	compiler warnings.

1999-02-02  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h :
	In HAL_ICACHE_INVALIDATE_ALL() and HAL_ICACHE_INVALIDATE(), fixed
	typos in passing arguments to asm sections.
	Fixes PR 18951.

1999-01-26  Hugo Tyson  <hmt@masala.cygnus.co.uk>

	* src/mips.ld:
	Add copyright notice.  (Though these files will later be generated
	by a tool and so not copyright, these default setups are.)

1999-01-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c (cyg_hal_invoke_constructors): 
	Add code to deal with CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG
	Tidy up and update description header
	Shorten needlessly long lines
	Remove all traces of non-CYG_KERNEL_USE_INIT_PRIORITY code

1999-01-15  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/mips.ld:
	Provide alternate definition of macro SECTION_rom_vectors() for
	RAM startup (CYG_HAL_STARTUP_RAM) so that minimal sim testing
	works.  Note: this is an instance where two definitions (of
	identical "API") of a macro occur in the prototype <target>.ld
	file; the MLT is required not to be confused by this.

1999-01-15  John Dallaway  <jld@cygnus.co.uk>

      * src/mips.ld: add section macro for .vsr_table

1999-01-13  John Dallaway  <jld@cygnus.co.uk>

      * src/mips.ld: add section macro for .rel.dyn

1999-01-13  John Dallaway  <jld@cygnus.co.uk>

      * src/mips.ld: new linker script for MLT
      * src/PKGconf.mak: add mips.ld rules for MLT

1999-01-13  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h: CYG_DOUBLE_BYTEORDER now in <infra/cyg_type.h>

1999-01-12  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/basetype.h (CYG_DOUBLE_BYTEORDER): Define ordering
	for words within doubles.

1999-01-12  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h: 
	Modified HAL_DCACHE_INVALIDATE_ALL() to correctly touch all cache
	lines twice to ensure that the cache and memory are
	consistent. This is the best we can do without direct support for
	invalidation.
	
	* src/hal_misc.c: Altered call to patch_dbg_syscalls() to pass
	pointer to base of vector rather than a single vector entry.

1998-12-15  Jesper Skov  <jskov@cygnus.co.uk>
        PR 18543

	* include/hal_cache.h (HAL_DCACHE_INVALIDATE): Fixed variable
	name.

1998-12-15  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_arch.h: 
	* src/context.S (hal_setjmp, hal_longjump):
	Added CYGARC definitions for jmpbuf entries.
	Corrected jmpbuf size.

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_UNLOCK_ALL,
	HAL_ICACHE_UNLOCK_ALL): Added.

1998-11-26  Jesper Skov  <jskov@cygnus.co.uk>

	* include/mips-regs.h:
	* src/mips-stub.c:
	Added use of CYGARC_HAL_COMMON_EXPORT_CPU_MACROS.

1998-11-18  Gary Thomas  <gthomas@cygnus.co.uk>

	* include/hal_intr.h: Add support for interrupt latency
	measurements, controlled by CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY.

1998-10-27  Jesper Skov  <jskov@cygnus.co.uk>
        PR 18033

	* include/hal_intr.h: Replaced CYGIMP_HAL_INTERRUPTS_CHAIN
	with the correct CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN.

1998-10-27  Jesper Skov  <jskov@cygnus.co.uk>
        PR 18021
	* src/hal_misc.c (hal_ctrlc_isr): Removed break; to prevent
	compiler error.

1998-10-25  Jesper Skov  <jskov@cygnus.co.uk>

	* src/mips-stub.c (__build_t_packet): Replaced
	CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT with
	CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT. 
	Fixed #endif comment.

	* src/hal_misc.c (hal_ctrlc_isr): Replaced
	CYGDBG_KERNEL_DEBUG_GDB_INCLUDE_STUBS with
	CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS.

	* include/hal_intr.h: Replaced CYGIMP_KERNEL_INTERRUPTS_CHAIN with
	CYGIMP_HAL_INTERRUPTS_CHAIN.

1998-10-23  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_intr.h: Include pkgconf/hal.h.

1998-10-16  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S (__interrupt_stack):
	Made the interrupt stack size configurable.

1998-10-16  Nick Garnett  <nickg@cygnus.co.uk>

	* src/hal_misc.c:
	Enabled caches by default.

1998-10-14  Nick Garnett  <nickg@cygnus.co.uk>

	* src/context.S (hal_thread_switch_context):
	Store copy of R31(RA) in PC slot in register state to keep GDB
	happy.
	* include/hal_arch.h (HAL_THREAD_INIT_CONTEXT):
	Intialize PC slot in register state.

	* src/hal_misc.c:
	Altered ifdefs to allow building without kernel present.

	* include/mips-stub.h:
	Include generic-stub.h from HAL rather than from kernel.

	* src/mips-stub.c:
	Added signal definitions to avoid including signal.h.

	* include/hal_intr.h:
	Added implementations of HAL_INTERRUPT_ACKNOWLEDGE() and
	HAL_INTERRUPT_SET_LEVEL().

1998-10-13  Jesper Skov  <jskov@cygnus.co.uk>

	* src/hal_misc.c: Use GDB array rather than HAL_SavedRegisters
	structure. Rely on generic stub to pack/unpack the array.

	* include/hal_arch.h (HAL_GET_GDB_REGISTERS,
	HAL_SET_GDB_REGISTERS): get/set full register set.

1998-10-13  Jesper Skov  <jskov@cygnus.co.uk>

	* include/mips-stub.h: Moved first use of regnames below
	definition.

Sun Sep 27 12:17:42 1998  Jesper Skov  <jskov@cygnus.co.uk>

	* include/hal_cache.h (HAL_DCACHE_LOCK): Terminate asm string.

1998-09-26  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h:
	Cleaned up some compilation errors.

Tue Sep 15 19:13:43 1998  David Moore  <dsm@keema.cygnus.co.uk>

	* src/vectors.S: Cleaned up comments.

1998-09-15  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_arch.h (HAL_GET_GDB_REGISTERS):
	Initialized R30 to a copy of SP to avoid GDB making bogus memory
	references.

	* src/hal_misc.c:
	Added support for Ctrl-C processing when running under Cygmon.
	Fixed a compiler warning.

1998-09-14  Bart Veer  <bartv@cygnus.co.uk>

	* src/PKGconf.mak:
	Made vectors.o dependent on the various files that can contain
	makefile variables or rules. This is needed after changes to
	pkgconf.tcl for PRs 17195 and 17286.

Mon Sep 14 11:10:20 1998  Jesper Skov  <jskov@lassi.cygnus.co.uk>
        PR 17230
	
	* src/vectors.S: Replaced CYGIMP_KERNEL_INTERRUPTS_CHAIN with new
 	CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN.

1998-09-14  Nick Garnett  <nickg@cygnus.co.uk>
        PR 17230

	* include/hal_intr.h:
	Added HAL_TRANSLATE_VECTOR() to translate a supplied vector number
	into one that can be used in the HAL. Added calls to it in
	HAL_INTERRUPT_ATTACH() and HAL_INTERRUPT_DETACH().

1998-09-12  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_tx39.h:
	Added missing descriptions (PR 17184)

	* src/vectors.S:
	<pkgconf/kernel.h> was being included without properly checking
	that the kernel package was enabled.

	* src/hal_misc.c (exception_handler): 
	Sort out exception handling options (PR 16953)

1998-09-11  Nick Garnett  <nickg@cygnus.co.uk>
        PR 17230
	
	* src/vectors.S (__default_interrupt_vsr):
	Modified interrupt decode code to preserve raising interrupt
	number to pass to ISR, even when using chained interrupts.

1998-09-03  Bart Veer  <bartv@cygnus.co.uk>

	* src/mips-stub.c:
	Fixed type in config option name.

1998-09-02  Bart Veer  <bartv@cygnus.co.uk>

	* include/pkgconf/hal_tx39.h: 
	New header file for architecture-specific configuration options
	
	* tests/PKGconf.mak: 
	* src/PKGconf.mak: 
	Sort out package naming conventions.
	
Tue Sep  1 19:26:45 1998  Hugo Tyson  <hmt@cygnus.co.uk>

	* src/hal_misc.c: 
	Use CYGDBG_INFRA_DIAG_USE_DEVICE (from infra.h) instead of
	CYG_DIAG_USE_DEVICE (badly named, from kernel.h).

1998-09-01  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h:
	Added CYG_EXCEPTION_COUNT.

1998-08-28  Bart Veer  <bartv@cygnus.co.uk>

	* src/vectors.S, src/context.S, src/hal_misc.c, src/mips-stub.c:
	Updated for new kernel configuration option symbol names

Fri Aug 28 10:01:24 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* src/hal_misc.c:
	Rename __main() to cyg_hal_invoke_constructors() to prevent the
	implied link with things called, or related to main(). Remove static
	initialised variable as we can now guarantee it is only called
	once.

	* src/vectors.S:
	Instead of calling main(), call cyg_start() which lives in the infra
	package.
	Explicitly invoke constructors as it isn't done magically for us
	any more, now that main() is no longer used.
	

1998-08-25  Nick Garnett  <nickg@cygnus.co.uk>

	* src/vectors.S:
	Now pass pointer to saved registers as third argument to
	interrupt_end().

	* include/hal_arch.h:
	Added macros to support GDB.

Tue Aug 25 02:33:59 1998  Jonathan Larmour  <jlarmour@cygnus.co.uk>

	* include/mips_stub.h, src/hal_misc.c: 
	Add void to prototypes and typedefs that want it to silence warnings

1998-08-21  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_cache.h:
	Now includes cyg_type.h rather than ktypes.h.	

1998-08-18  Nick Garnett  <nickg@cygnus.co.uk>

	* src/context.S: 
	* include/hal_arch.h: 
	* include/hal_io.h: 
	* include/hal_intr.h:
	Now uses cyg_type.h rather than ktypes.h.

	* src/hal_misc.c: 
	* src/vectors.S:
	Now uses hal.h rather than kernel.h.

1998-07-23  Nick Garnett  <nickg@cygnus.co.uk>

	* include/hal_intr.h: Fixed some issues raised bt code review.

	* src/context.S: 
	* include/hal_arch.h: Fixed some typos raised by code review.

	* include/hal_intr.h (HAL_INTERRUPT_MASK): 
	* src/vectors.S (hal_interrupt_level): Added hal_interrupt_level
	to allow for interaction between HAL_INTERRUPT_UNMASK() and
	HAL_INTERRUPT_SET_LEVEL().
	

//===========================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//===========================================================================
