2003-10-30  Gary Thomas  <gary@mlbassoc.com>

	* cdl/hal_arm_sa11x0.cdl: 
	* src/sa11x0_misc.c: Add support for profiling, using timer #1

2003-07-18  Nick Garnett  <nickg@balti.calivar.com>

	* cdl/hal_arm_sa11x0.cdl:
        Changed values for CYGNUM_HAL_RTC_NUMERATOR,
        CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
        "default_value" from "calculated". This makes it easier
        to change these values globally.
        
2002-10-26  Gary Thomas  <gthomas@ecoscentric.com> (inspired by)
2002-10-26  Gordon Schumacher <gordon_schumacher@maxtor.com>

	* include/hal_sa11x0.h: Make ROM/RAM/FLASH space layout clearer.

2002-10-25  Gary Thomas  <gthomas@ecoscentric.com> (inspired by)
2002-10-25  Gordon Schumacher <gordon_schumacher@maxtor.com>

	* include/hal_sa11x0.h: Add SRAM definitions.

2002-08-12  Mark Salter  <msalter@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Remove CYGSEM_REDBOOT_ARM_LINUX_BOOT
	requirement.

2002-05-18  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c (cyg_hal_plf_serial_control): Fix return value
	when changing the baud rate.

2002-05-01  Gary Thomas  <gthomas@redhat.com>

	* tests/mmap_test.c: Diagnostic prints for failure cases.

2002-04-24  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: CYGPRI_KERNEL_TESTS_DHRYSTONE_PASSES added.

2002-01-29  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Removed CRUFT_H.

	* include/hal_sa11x0.h: Moved CYGARC_PHYSICAL_ADDRESS definition
	to:
	* include/var_io.h: this file.

2002-01-28  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Declare var_io.h file.
	Tug RedBoot requirements away in a component properly controlled
	by the RedBoot presence.
	* include/var_io.h: Added.

2002-01-25  Jesper Skov  <jskov@redhat.com>

	* include/hal_sa11x0.h (CYGARC_PHYSICAL_ADDRESS): Added.

	* src/redboot_linux_exec.c: Moved to arch directory.
	* cdl/hal_arm_sa11x0.cdl: Replaced options with requirements to
	arch options.

2002-01-25  David Woodhouse  <dwmw2@cambridge.redhat.com>

	* src/redboot_linux_exec.c (do_exec): Trick the compiler into
	thinking that the end1 and lab1 labels are both actually used,
	so it doesn't move them around.
	
2002-01-22  David Woodhouse  <dwmw2@cambridge.redhat.com>

	* src/redboot_linux_exec.c (do_exec): Pass ATAG_MEM to Linux
	kernel, having tried to obtain the appropriate numbers from the
	MLT header file. This could probably do with some improvement -
	the actual information we need isn't necessarily present in the
	required form.

2002-01-14  David Woodhouse  <dwmw2@cambridge.redhat.com>

	* src/redboot_linux_exec.c (do_exec): Use load start/end
	parameters as defaults. Don't copy image if specified length is
	zero.

2001-10-31  Jonathan Larmour  <jlarmour@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Indicate support of variable baud rates.

2001-10-09  Hugo Tyson  <hmt@redhat.com>

	* src/hal_diag.c (cyg_hal_plf_serial_isr): As well as the sticky
	Rx Idle bit, clear the sticky bits for interrupts for start or end
	of a line break, otherwise messing with the wiring can cause an
	interrupt loop and hang the target.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c: 
	printf() is no longer a part of RedBoot.  Thus all programs
	must use diag_printf() and related functions instead.

2001-08-21  Hugo Tyson  <hmt@redhat.com>

	* include/hal_var_ints.h (HAL_CLOCK_LATENCY()): Define this if
	it's needed, for the routine below.

	* src/sa11x0_misc.c (hal_clock_latency): A neater fix for the
	below change: use a separate routine for measuring latency, which
	assumes it is called in the ISR, before the clock is reset.

2001-08-20  Hugo Tyson  <hmt@redhat.com>

	* src/sa11x0_misc.c (hal_clock_read): Make hal_clock_read() return
	the true value (as expected by the kernel latency test) from the
	last interrupt if we just had that interrupt and didn't yet reset
	the clock.  Otherwise ISR latencies are reported as one tick (1cS,
	10000uS) too large.

2001-07-27  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c: Fix copyright disclaimers to satisfy
	original owner (Linux kernel maintainer Russell King).

2001-07-23  Gary Thomas  <gthomas@redhat.com>

	* src/sa11x0_misc.c (hal_IRQ_handler): Support board/platform
	specific [extended] interrupts.  On the SA11x0, these would often
	be cascaded via GPIO logic.  Use of extended macros allows SA11x0
	variant code to handle the general case, with board specific code
	defined by board packages.  Look at the iPAQ board package for
	a sample of how to use this.

2001-05-19  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c (do_exec): Protect compilation - scripting
	is configurable.

2001-05-17  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c: Allow baud rate to be settable.

2001-04-16  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Add CDL to describe CPU family.

2001-03-23  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c (do_exec): 
	Entry point must be a physical address.

	* cdl/hal_arm_sa11x0.cdl: 
	Allow platforms to override default clock speed.

2001-03-20  Gary Thomas  <gthomas@redhat.com>

	* src/redboot_linux_exec.c (do_exec): Improve wait timeout.

2001-03-07  Hugo Tyson  <hmt@redhat.com>

	* src/redboot_linux_exec.c: Do not build anything if
	HAL_PLATFORM_MACHINE_TYPE is not defined.

2001-03-02  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: HAL_PLF_INIT stuff moved to hal/common.

2001-03-01  Gary Thomas  <gthomas@redhat.com>

	* src/sa11x0_misc.c: 
	* cdl/hal_arm_sa11x0.cdl: New interface CYGINT_HAL_PLF_IF_INIT
	which, if defined, indicates that the platform has plf_if_init.

2001-03-01  Hugo Tyson  <hmt@redhat.com>

	* src/sa11x0_misc.c: Remove warnings from lack of prototype for
	plf_if_init() - for platforms that don't have it.

2001-02-28  Gary Thomas  <gthomas@redhat.com>

	* src/sa11x0_misc.c: Allow platform to perform additional
	I/O initialization (virtual vector based).  The function
	plf_if_init() can be overridden by platform code for this.

2001-02-28  Hugo Tyson  <hmt@redhat.com>

	* include/hal_sa11x0.h (SA11X0_TUCR_RESERVED_BITS):
	(SA11X0_TUCR_EXTERNAL_MEMORY_MASTER): Add definitions of these
	bits for enabling an external bus master.

2001-02-28  Hugo Tyson  <hmt@redhat.com>
 
	* include/hal_sa11x0.h (SA11X0_OWER): Add OS Timer Watchdog Match
	Enable Register for use by Watchdog package.
	(SA11X0_OWER_ENABLE): And a long-winded "1" to enable it.

2001-02-24  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Add RedBoot commands/options.
	
	* src/redboot_linux_exec.c: New file - RedBoot commands to
	support booting Linux kernel.

2001-02-23  Jesper Skov  <jskov@redhat.com>

	* include/hal_cache.h (HAL_FLASH_CACHES_OLD_MACROS): Some
	platforms use deprecated cache handling macros.

2001-02-20  Jonathan Larmour  <jlarmour@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Clarify CYGHWR_HAL_ARM_SA11X0_UART1,3
	description.

2001-02-20  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c: 
	* cdl/hal_arm_sa11x0.cdl: Add CDL to control which serial ports
	are available/used.

2001-02-20  Hugo Tyson  <hmt@redhat.com>
2001-02-12  Robin Farine  <acnrf@dial.eunet.ch>

	* include/hal_sa11x0.h (SA11X0_IRQ_GPIO_9_EDGE_DETECT): Define
	this to be 9 not 0 - simple typo.  Thanks Robin!

2001-02-19  Hugo Tyson  <hmt@redhat.com>
2001-02-12  Robin Farine  <acnrf@dial.eunet.ch>

	* src/sa11x0_misc.c (hal_clock_reset): Handles SA11X0_OSCR as a
	free running counter.
	(hal_clock_read): Adapts to changes in hal_clock_reset().
	(hal_delay_us): Likewise.

	There is only one counting register (OSCR), but multiple match
	registers and interrupt sources (OSMR1-OSMR3).  Setting our match
	register to COUNT and the counter register to 0 each tick makes it
	very hard to use the other match registers - whereas they are
	intended for easy general use.

	This change sets our match register OSMR0 to the next time
	interval and leaves the OSCR freerunning so that other match
	registers can easily be used, which is much more flexible, and
	much more what was intented.

	Because the OSCR is just a counter, and the match registers
	compare only for exact equality, no special measures to deal with
	the counter wrapping/overflowing are needed.

2001-02-08  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Replace CYGSEM_HAL_DIAG_MANGLER_None with
	CYGDBG_HAL_DIAG_TO_DEBUG_CHAN.

2001-02-01  Jesper Skov  <jskov@redhat.com>

	* include/hal_var_ints.h: Include registers definitions used in
	reset macro.

2001-01-31  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Replaced CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL
	with CYGSEM_HAL_DIAG_MANGLER_None

2001-01-26  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Removed CYGSEM_HAL_VIRTUAL_VECTOR_DIAG check.
	* include/plf_stub.h: Moved reset macro to
	* include/hal_var_ints.h: this file.

2001-01-05  Hugo Tyson  <hmt@redhat.com>

	* include/hal_mm.h: Change bitfields within memmap entry to
	unsigned, so that we can compare values successfully - otherwise
	"0x02" sign-extends and is never equal after promotion!

	* include/hal_cache.h: Include the platform memory map
	interrogation definitions from <cyg/hal/plf_mmap.h> and header for
	the new functions below.

	* src/sa11x0_misc.c (hal_virt_to_phys_address): 
	(hal_phys_to_virt_address): 
	(hal_virt_to_uncached_address): New functions which inspect the
	real memory map in force to verify the static translations defined
	in the efficient macro versions.

	* tests/mmap_test.c (endif): New file: testcase for memory map
	interrogation macros and verification functions.

	* cdl/hal_arm_sa11x0.cdl: Build the testcase.

2000-12-13  Hugo Tyson  <hmt@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Define a symbol CYGBLD_HAL_VAR_INTS_H so
	that the architectural HAL can see <cyg/hal/hal_var_ints.h> below.

	* include/hal_var_ints.h: New file; actually a copy of all the
	platforms' hal_platform_ints.h for all the sa11x0 platforms.

	* include/hal_mm.h: New file; actually an excerpt from all the
	platforms' $PLATFORM_misc.h for all the sa11x0 platforms, which
	describes MM table layout and macros for initializing it.

2000-12-12  Gary Thomas  <gthomas@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: Allow RTC clock rate to be changable.

2000-12-04  Hugo Tyson  <hmt@redhat.com>

	* include/hal_cache.h: Consistently ensure that ARM registers used
	in MCR ops to cache-control coprocessors, where the data doesn't
	matter, all actually have data zero ("SBZ") as in the Jaggar book.
	This may well not be necessary, but for the sake of making sure...

2000-12-01  Hugo Tyson  <hmt@redhat.com>

	* include/hal_cache.h: Define addressable cache line operations
	HAL_DCACHE_STORE(), HAL_DCACHE_INVALIDATE(), HAL_DCACHE_FLUSH()
	now that I have understood how come the test (kcache2) was
	failing.  See kernel ChangeLog for details.  Also tidied up a
	couple of other minor details.

2000-11-27  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c (init_channel): UART setup required on Brutus as well.

2000-11-21  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c (init_channel): Disable broken uart setups on platforms
	other than the SA1110MM, since this code seems to be somewhat broken.

2000-10-25  Drew Moseley  <dmoseley@redhat.com>

	* src/hal_diag.c: Added UART1 support for SA1100 targets.

	* include/hal_sa11x0.h: Added GPIO bit definitions.

2000-07-14  Gary Thomas  <gthomas@redhat.com>

	* include/hal_diag.h (HAL_DELAY_US): Define.

	* src/sa11x0_misc.c (hal_delay_us): New function.  Used to 
	provide timers/delays in non-kernel systems.

2000-07-05  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: 
	* src/hal_diag.c:
	Cleaned up channel options.
	
	* src/hal_diag.c: Use per-channel structure instead of code cruft.

2000-06-30  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: calling i/f macro changes.

2000-06-28  Jesper Skov  <jskov@redhat.com>

	* cdl/hal_arm_sa11x0.cdl: 
	* include/plf_stub.h:
	* src/plf_stub.c: [deleted]
	Stub uses vector table for all IO.
	
	* src/sa11x0_misc.c: Fix compiler warning.

2000-06-27  Jesper Skov  <jskov@redhat.com>

	* src/hal_diag.c: Some fixes and code layout changes (Gary
	Thomas).

	* src/hal_diag.c:
	* include/hal_diag.h:
	* include/hal_sa11x0.h:
	Changed to initialize all procs tables. Added timeout getc, and
	proper debug channel switch behavior.

2000-06-24  Gary Thomas  <gthomas@redhat.com>

	* src/sa11x0_misc.c (hal_clock_reset): Add code to compensate for
	clock drift since this hardware does not reset on interrupts.
	(hal_clock_read): Also adjust the value returned here for same reason.

2000-06-22  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c (hal_diag_write_char): 
	Fix typo: CYGINT_HAL_GDB_PORT_VECTOR to be CYGHWR_HAL_GDB_PORT_VECTOR
	
2000-06-19  Gary Thomas  <gthomas@redhat.com>

	* include/hal_diag.h: 
	* include/plf_stub.h: 
	* src/hal_diag.c: 
	* src/sa11x0_misc.c: Update for virtual vector (debug) support.

2000-06-12  Gary Thomas  <gthomas@redhat.com>

	* src/hal_diag.c: Fix baud rates for 960,19200.  Take out "announce"
	string in ROM mode.

2000-06-05  Gary Thomas  <gthomas@redhat.com>

	* src/plf_stub.c: 
	* include/plf_stub.h: 'sa1100' shared items renamed to 'sa11x0'.

	* src/sa11x0_misc.c (hal_IRQ_handler): 
	(hal_interrupt_mask): 
	(hal_interrupt_unmask): 
	(hal_interrupt_acknowledge): 
	(hal_interrupt_configure): Complete support for GPIO interrupts.  
	Some of these are direct, others are grouped and the code needs 
	to handle both.  Also update support for GPIO edge detect interrupt 
	circuitry.

2000-06-04  Gary Thomas  <gthomas@redhat.com>

	* include/hal_cache.h: 
	* src/hal_diag.c: 
	* src/sa11x0_misc.c: Renaming of 'sa1100' shared stuff to be
	'sa11x0'.
	
	* include/hal_sa11x0.h: Renamed from 'hal_sa1100.h'.

2000-06-01  Gary Thomas  <gthomas@redhat.com>

	* src/sa11x0_misc.c: Enable caches.

	* include/hal_sa1100.h: Misc cleanups and additions necessary for
	ROM startup mode.

2000-05-10  Gary Thomas  <gthomas@redhat.com>

	* current/src/plf_stub.c:
	* current/src/hal_diag.c:
	* current/src/sa11x0_misc.c: 
	* current/include/hal_diag.h: 
	* current/include/hal_sa1100.h: 
	* current/include/hal_cache.h: 
	* current/include/plf_stub.h: 
	* current/cdl/hal_arm_sa11x0.cdl: New file(s).

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
