Mercurial > yaffs-ecoscentric
diff packages/fs/yaffs/current/tests/yaffs5.c @ 336:38a956139d12
Import tests from eCosPro
| author | Ross Younger <wry@ecoscentric.com> |
|---|---|
| date | Tue, 03 Nov 2009 18:00:39 +0000 |
| parents | |
| children | b254764fbeac |
line wrap: on
line diff
new file mode 100644 --- /dev/null +++ b/packages/fs/yaffs/current/tests/yaffs5.c @@ -0,0 +1,815 @@ +//========================================================================== +// +// yaffs5.c +// +// Test FAT filesystem +// +//========================================================================== +// ####ECOSGPLCOPYRIGHTBEGIN#### +// ------------------------------------------- +// This file is part of eCos, the Embedded Configurable Operating System. +// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2006, 2007 Free Software Foundation, Inc. +// Copyright (C) 2004, 2006, 2007 eCosCentric Limited +// +// eCos is free software; you can redistribute it and/or modify it under +// the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 or (at your option) any later +// version. +// +// eCos is distributed in the hope that it will be useful, but WITHOUT +// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +// for more details. +// +// You should have received a copy of the GNU General Public License +// along with eCos; if not, write to the Free Software Foundation, Inc., +// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +// +// As a special exception, if other files instantiate templates or use +// macros or inline functions from this file, or you compile this file +// and link it with other works to produce a work based on this file, +// this file does not by itself cause the resulting work to be covered by +// the GNU General Public License. However the source code for this file +// must still be made available in accordance with section (3) of the GNU +// General Public License v2. +// +// This exception does not invalidate any other reasons why a work based +// on this file might be covered by the GNU General Public License. +// ------------------------------------------- +// ####ECOSGPLCOPYRIGHTEND#### +//========================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): nickg +// Contributors: nickg +// Date: 2007-03-28 +// Purpose: Test FAT system +// Description: This test gets some performance figures from the +// FAT filesystem. +// +//####DESCRIPTIONEND#### +// +//========================================================================== + +#include <pkgconf/hal.h> +#include <pkgconf/kernel.h> +#include <pkgconf/io_fileio.h> + +#include CYGDAT_DEVS_DISK_CFG // testing config defines + +#include <cyg/kernel/ktypes.h> // base kernel types +#include <cyg/infra/cyg_trac.h> // tracing macros +#include <cyg/infra/cyg_ass.h> // assertion macros + +#include <unistd.h> +#include <fcntl.h> +#include <sys/stat.h> +#include <errno.h> +#include <string.h> +#include <dirent.h> +#include <stdlib.h> + +#include <cyg/fileio/fileio.h> + +#include <cyg/infra/testcase.h> +#include <cyg/infra/diag.h> // HAL polled output + +//========================================================================== +// Config options + +#define TEST_DEVICE CYGDAT_DEVS_DISK_TEST_DEVICE + +#define TEST_MOUNTPOINT CYGDAT_DEVS_DISK_TEST_MOUNTPOINT + +#define TEST_DIRECTORY CYGDAT_DEVS_DISK_TEST_DIRECTORY + +#define TEST_FSTYPE "yaffs" + +#ifdef CYGDAT_DEVS_DISK_TEST_MOUNTPOINT2 + +#define TEST_DEVICE2 CYGDAT_DEVS_DISK_TEST_DEVICE2 + +#define TEST_MOUNTPOINT2 CYGDAT_DEVS_DISK_TEST_MOUNTPOINT2 + +#define TEST_DIRECTORY2 CYGDAT_DEVS_DISK_TEST_DIRECTORY2 + +#define TEST_FSTYPE2 "yaffs" + +#endif + +//========================================================================== + +#define SHOW_RESULT( _fn, _res ) \ +{ \ + diag_printf("<FAIL>: " #_fn "() returned %ld %s\n", (long)_res, _res<0?strerror(errno):""); \ +} + +//========================================================================== + +typedef struct +{ + cyg_int64 ticks; + cyg_int32 halticks; +} timestamp; + +typedef struct +{ + timestamp start; + timestamp end; + cyg_int64 interval; // In HAL ticks + cyg_int64 us_interval; // Interval in microseconds +} timing; + +static cyg_int64 ticks_overhead = 0; +static cyg_int32 us_per_haltick = 0; +static cyg_int32 halticks_per_us = 0; + +static cyg_int64 rtc_resolution[] = CYGNUM_KERNEL_COUNTERS_RTC_RESOLUTION; +static cyg_int64 rtc_period = CYGNUM_KERNEL_COUNTERS_RTC_PERIOD; +static cyg_int32 ticks_per_second; + +//========================================================================== + +static char date_string[] = __DATE__; +static char time_string[] = __TIME__; + +cyg_uint32 timehash; + +//========================================================================== + +static void wait_for_tick( void ) +{ + cyg_tick_count_t now = cyg_current_time(); + + while( cyg_current_time() == now ) + continue; +} + +static void get_timestamp( timestamp *ts ) +{ + ts->ticks = cyg_current_time(); + HAL_CLOCK_READ( (cyg_uint32 *)&ts->halticks ); +} + +static cyg_int64 ticks_to_us( cyg_int64 ticks ) +{ + cyg_int64 us; + + if( us_per_haltick != 0 ) + us = ticks * us_per_haltick; + else + us = ticks / halticks_per_us; + + return us; +} + +static void calculate_interval( timing *t ) +{ + t->interval = t->end.halticks - t->start.halticks; + + t->interval += (t->end.ticks - t->start.ticks) * rtc_period; + + t->interval -= ticks_overhead; + + t->us_interval = ticks_to_us( t->interval ); +} + +static void init_timing( void ) +{ + timing t; + + ticks_per_second = (1000000000ULL*rtc_resolution[1])/rtc_resolution[0]; + us_per_haltick = 1000000/(rtc_period * rtc_resolution[1]); + halticks_per_us = (rtc_period * rtc_resolution[1])/1000000; + + wait_for_tick(); + + get_timestamp( &t.start ); + get_timestamp( &t.end ); + + calculate_interval( &t ); + + ticks_overhead = t.interval; + + diag_printf("Timing overhead %lld ticks\n", ticks_overhead ); + +} + +//========================================================================== + +#ifndef CYGPKG_LIBC_STRING + +char *strcat( char *s1, const char *s2 ) +{ + char *s = s1; + while( *s1 ) s1++; + while( (*s1++ = *s2++) != 0); + return s; +} + +#endif + +__externC int +rename( const char * /* oldpath */, const char * /* newpath */ ) __THROW; + +//========================================================================== + +static void listdir( char *name, int statp, int numexpected, int *numgot ) +{ + int err; + DIR *dirp; + int num=0; + + diag_printf("<INFO>: reading directory %s\n",name); + +// diag_printf("<INFO>: opendir(%s)\n",name); + dirp = opendir( name ); + if( dirp == NULL ) SHOW_RESULT( opendir, -1 ); + + for(;;) + { + struct dirent *entry = readdir( dirp ); + + if( entry == NULL ) + break; + num++; + diag_printf("<INFO>: entry %14s",entry->d_name); + if( statp ) + { + char fullname[PATH_MAX]; + struct stat sbuf; + + if( name[0] ) + { + strcpy(fullname, name ); + if( !(name[0] == '/' && name[1] == 0 ) ) + strcat(fullname, "/" ); + } + else fullname[0] = 0; + + strcat(fullname, entry->d_name ); + + err = stat( fullname, &sbuf ); + if( err < 0 ) + { + if( errno == ENOSYS ) + diag_printf(" <no status available>"); + else SHOW_RESULT( stat, err ); + } + else + { + diag_printf(" [mode %08x ino %08x nlink %d size %ld]", + sbuf.st_mode,sbuf.st_ino,sbuf.st_nlink,sbuf.st_size); + } + } + + diag_printf("\n"); + } + +// diag_printf("<INFO>: closedir(%s)\n",name); + err = closedir( dirp ); + if( err < 0 ) SHOW_RESULT( stat, err ); + if (numexpected >= 0 && num != numexpected) + CYG_TEST_FAIL("Wrong number of dir entries\n"); + if ( numgot != NULL ) + *numgot = num; +} + +//========================================================================== + +static void createfile( char *name, size_t asize, size_t block_size ) +{ + size_t size = asize; + cyg_uint8 *buf; + cyg_uint32 *b; + int fd; + ssize_t wrote; + int i; + int err; + timing opent, writet; + + diag_printf("\n--------------------------------------------------------------------\n"); + diag_printf("<INFO>: create file %s size %ld block_size %ld\n",name, (long)size, (long)block_size); + + buf = malloc( block_size ); + if( buf == NULL ) + { + SHOW_RESULT( malloc, -1 ); + return; + } + b = (cyg_uint32 *)buf; + + err = access( name, F_OK ); + if( err < 0 && errno != EACCES ) SHOW_RESULT( access, err ); + + i = 0; + while( i < block_size/sizeof(cyg_uint32) ) + { + b[i] = i; + i++; + b[i++] = 0; + b[i++] = timehash; + b[i++] = 0x12345678; + } + + + get_timestamp( &opent.start ); + fd = open( name, O_WRONLY|O_CREAT ); + get_timestamp( &opent.end ); + if( fd < 0 ) SHOW_RESULT( open, fd ); + + get_timestamp( &writet.start ); + while( size > 0 ) + { + ssize_t len = size; + if ( len > block_size ) len = block_size; + + b[1] = asize-size; + b[block_size/sizeof(cyg_uint32)-3] = asize-size; + wrote = write( fd, buf, len ); + if( wrote != len ) SHOW_RESULT( write, wrote ); + + size -= wrote; + } + get_timestamp( &writet.end ); + + free( buf ); + + err = close( fd ); + if( err < 0 ) SHOW_RESULT( close, err ); + + calculate_interval( &opent ); + calculate_interval( &writet ); + + diag_printf("CreateFile Results: %s size %ld\n", name, (long)asize); + diag_printf(" Open %8d.%03d ms\n", (int)(opent.us_interval/1000), (int)(opent.us_interval%1000) ); + diag_printf(" Write %8d.%03d ms\n", (int)(writet.us_interval/1000), (int)(writet.us_interval%1000) ); + diag_printf(" Data Rate %10lld KiB/s\n", (1000000LL*asize)/1024/writet.us_interval); +} + +//========================================================================== + +static void checkfile( char *name, size_t block_size ) +{ + cyg_uint8 *buf; + cyg_uint32 *b; + int fd; + ssize_t done; + int err; + off_t pos = 0; + timing opent, readt; + + diag_printf("\n--------------------------------------------------------------------\n"); + diag_printf("<INFO>: check file %s\n",name); + + buf = malloc( block_size ); + if( buf == NULL ) + { + SHOW_RESULT( malloc, -1 ); + return; + } + b = (cyg_uint32 *)buf; + + err = access( name, F_OK ); + if( err != 0 ) SHOW_RESULT( access, err ); + + get_timestamp( &opent.start ); + fd = open( name, O_RDONLY ); + get_timestamp( &opent.end ); + if( fd < 0 ) SHOW_RESULT( open, fd ); + + get_timestamp( &readt.start ); + for(;;) + { + done = read( fd, buf, block_size ); + if( done < 0 ) SHOW_RESULT( read, done ); + + if( done == 0 ) break; + + // Check that this is the block we wrote + if( b[0] != 0 ) + diag_printf("b[%d] != %08x\n", 0, 0 ); + + if( b[1] != pos ) + diag_printf("b[%d] != %08x\n", 1, (unsigned)pos ); + + if( b[2] != timehash ) + diag_printf("b[%d] != %08x\n", 2, timehash ); + + if( b[3] != 0x12345678 ) + diag_printf("b[%d] != %08x\n", 3, 0x12345678 ); + + if( b[(block_size/sizeof(cyg_uint32))-4] != (block_size/sizeof(cyg_uint32)-4) ) + diag_printf("b[%lu](%08x) != %08x\n", (long)block_size/sizeof(cyg_uint32)-4, + b[(block_size/sizeof(cyg_uint32))-4], + (unsigned)(block_size/sizeof(cyg_uint32)-4) ); + + if( b[block_size/sizeof(cyg_uint32)-3] != pos ) + diag_printf("b[%lu] != %08x\n", (long)block_size/sizeof(cyg_uint32)-3, (unsigned)pos ); + + if( b[block_size/sizeof(cyg_uint32)-2] != timehash ) + diag_printf("b[%lu] != %08x\n", (long)block_size/sizeof(cyg_uint32)-2, timehash ); + + if( b[block_size/sizeof(cyg_uint32)-1] != 0x12345678 ) + diag_printf("b[%lu] != %08x\n", (long)block_size/sizeof(cyg_uint32)-1, 0x12345678 ); + + pos += done; + } + get_timestamp( &readt.end ); + + free( buf ); + + err = close( fd ); + if( err < 0 ) SHOW_RESULT( close, err ); + + calculate_interval( &opent ); + calculate_interval( &readt ); + + diag_printf("CheckFile Results: %s size %ld\n", name, pos); + diag_printf(" Open %8d.%03d ms\n", (int)(opent.us_interval/1000), (int)(opent.us_interval%1000) ); + diag_printf(" Read %8d.%03d ms\n", (int)(readt.us_interval/1000), (int)(readt.us_interval%1000) ); + diag_printf(" Data Rate %10lld KiB/s\n", (1000000LL*pos)/1024/readt.us_interval); +} + +//========================================================================== + +#define TIME_DATA_MAX 20 + +static void checkfile1( char *name, size_t block_size ) +{ + cyg_uint8 *buf; + cyg_uint32 *b; + int fd; + ssize_t done; + int err; + off_t pos = 0; + timing totalt; + + struct + { + int valid; + timing mountt; + timing opent; + timing seekt; + timing readt; + timing closet; + timing umountt; + } time_data[TIME_DATA_MAX]; + int td; + + for( td = 0; td < TIME_DATA_MAX; td++ ) + time_data[td].valid = 0; + td = 0; + + diag_printf("\n--------------------------------------------------------------------\n"); + diag_printf("<INFO>: check file1 %s\n",name); + + buf = malloc( block_size ); + if( buf == NULL ) + { + SHOW_RESULT( malloc, -1 ); + return; + } + b = (cyg_uint32 *)buf; + + get_timestamp( &totalt.start ); + for(;;) + { + get_timestamp( &time_data[td].mountt.start ); + err = mount( TEST_DEVICE, TEST_MOUNTPOINT, TEST_FSTYPE ); + get_timestamp( &time_data[td].mountt.end ); + if( err < 0 ) SHOW_RESULT( mount, err ); + + get_timestamp( &time_data[td].opent.start ); + fd = open( name, O_RDONLY ); + get_timestamp( &time_data[td].opent.end ); + if( fd < 0 ) SHOW_RESULT( open, fd ); + + get_timestamp( &time_data[td].seekt.start ); + err = lseek( fd, pos, SEEK_SET ); + get_timestamp( &time_data[td].seekt.end ); + if( err < 0 ) SHOW_RESULT( lseek, err ); + + get_timestamp( &time_data[td].readt.start ); + done = read( fd, buf, block_size ); + get_timestamp( &time_data[td].readt.end ); + if( done < 0 ) SHOW_RESULT( read, done ); + + get_timestamp( &time_data[td].closet.start ); + err = close( fd ); + get_timestamp( &time_data[td].closet.end ); + if( err < 0 ) SHOW_RESULT( close, err ); + + get_timestamp( &time_data[td].umountt.start ); + err = umount( TEST_MOUNTPOINT ); + get_timestamp( &time_data[td].umountt.end ); + if( err < 0 ) SHOW_RESULT( umount, err ); + + if( done == 0 ) break; + + // Check that this is the block we wrote + if( b[0] != 0 ) + diag_printf("b[%d] != %08x\n", 0, 0 ); + + if( b[1] != pos ) + diag_printf("b[%d] != %08x\n", 1, (unsigned)pos ); + +// if( b[2] != timehash ) +// diag_printf("b[%d] != %08x\n", 2, timehash ); + + if( b[3] != 0x12345678 ) + diag_printf("b[%d] != %08x\n", 3, 0x12345678 ); + + if( b[(block_size/sizeof(cyg_uint32))-4] != (block_size/sizeof(cyg_uint32)-4) ) + diag_printf("b[%lu](%08x) != %08x\n", (long)block_size/sizeof(cyg_uint32)-4, + b[(block_size/sizeof(cyg_uint32))-4], + (unsigned)(block_size/sizeof(cyg_uint32)-4) ); + + if( b[block_size/sizeof(cyg_uint32)-3] != pos ) + diag_printf("b[%lu] != %08x\n", (long)block_size/sizeof(cyg_uint32)-3, (unsigned)pos ); + +// if( b[block_size/sizeof(cyg_uint32)-2] != timehash ) +// diag_printf("b[%d] != %08x\n", block_size/sizeof(cyg_uint32)-2, timehash ); + + if( b[block_size/sizeof(cyg_uint32)-1] != 0x12345678 ) + diag_printf("b[%lu] != %08x\n", (long)block_size/sizeof(cyg_uint32)-1, 0x12345678 ); + + pos += done; + + time_data[td].valid = 1; + if( td < (TIME_DATA_MAX-1) ) + td++; + } + get_timestamp( &totalt.end ); + + free( buf ); + + diag_printf("Block Mount Open Seek Read Close Umount\n"); + + for( td = 0; td < TIME_DATA_MAX; td++ ) + { + if( !time_data[td].valid ) + continue; + + calculate_interval( &time_data[td].mountt ); + calculate_interval( &time_data[td].opent ); + calculate_interval( &time_data[td].seekt ); + calculate_interval( &time_data[td].readt ); + calculate_interval( &time_data[td].closet ); + calculate_interval( &time_data[td].umountt ); + + diag_printf("%2d:", td); + diag_printf(" %8d.%03d", (int)(time_data[td].mountt.us_interval/1000), (int)(time_data[td].mountt.us_interval%1000) ); + diag_printf(" %8d.%03d", (int)(time_data[td].opent.us_interval/1000), (int)(time_data[td].opent.us_interval%1000) ); + diag_printf(" %8d.%03d", (int)(time_data[td].seekt.us_interval/1000), (int)(time_data[td].seekt.us_interval%1000) ); + diag_printf(" %8d.%03d", (int)(time_data[td].readt.us_interval/1000), (int)(time_data[td].readt.us_interval%1000) ); + diag_printf(" %8d.%03d", (int)(time_data[td].closet.us_interval/1000), (int)(time_data[td].closet.us_interval%1000) ); + diag_printf(" %8d.%03d", (int)(time_data[td].umountt.us_interval/1000), (int)(time_data[td].umountt.us_interval%1000) ); + diag_printf("\n"); + } + + calculate_interval( &totalt ); + diag_printf("CheckFile1 Results: %s size %ld\n", name, pos); + diag_printf(" Total %8d.%03d ms\n", (int)(totalt.us_interval/1000), (int)(totalt.us_interval%1000) ); + diag_printf(" Data Rate %10lld KiB/s\n", (1000000LL*pos)/1024/totalt.us_interval); + +} + +//========================================================================== + +void checkcwd( const char *cwd ) +{ + static char cwdbuf[PATH_MAX]; + char *ret; + + ret = getcwd( cwdbuf, sizeof(cwdbuf)); + if( ret == NULL ) SHOW_RESULT( getcwd, ret ); + + if( strcmp( cwdbuf, cwd ) != 0 ) + { + diag_printf( "cwdbuf %s cwd %s\n",cwdbuf, cwd ); + CYG_TEST_FAIL( "Current directory mismatch"); + } +} + +//========================================================================== + +void fs_callback( cyg_int32 event, CYG_ADDRWORD data ) +{ +#if 1 + diag_printf("Filesystem %sSAFE\n", + event==CYG_FS_CALLBACK_UNSAFE?"UN":""); +#endif +} + + +//========================================================================== +// main + +void yaffs5_main( CYG_ADDRESS id ) +{ + int err; + int existingdirents=-1; + int i; + timing mountt, umountt; + +#if defined(CYGSEM_FILEIO_BLOCK_USAGE) + struct cyg_fs_block_usage usage; +#endif +// struct cyg_fs_callback_info callback; + + CYG_TEST_INIT(); + + init_timing(); + + for( i = 0 ; date_string[i] != 0 ; i++ ) + timehash = (timehash<<1) ^ date_string[i]; + for( i = 0 ; time_string[i] != 0 ; i++ ) + timehash = (timehash<<1) ^ time_string[i]; + + // -------------------------------------------------------------- + +#if 1 +#define DO_UMOUNT + get_timestamp( &mountt.start ); + err = mount( TEST_DEVICE, TEST_MOUNTPOINT, TEST_FSTYPE ); +// err = mount( TEST_DEVICE, TEST_MOUNTPOINT, "yaffs:sync=write" ); +// err = mount( TEST_DEVICE, TEST_MOUNTPOINT, "yaffs:sync=close" ); +// err = mount( TEST_DEVICE, TEST_MOUNTPOINT, "yaffs:sync=data" ); + get_timestamp( &mountt.end ); + if( err < 0 ) { + SHOW_RESULT( mount, err ); + CYG_TEST_FAIL_FINISH("yaffs5"); + } + +#if 0 + callback.callback = fs_callback; + callback.data = 0; + err = cyg_fs_setinfo(TEST_MOUNTPOINT, FS_INFO_CALLBACK, + &callback, sizeof(callback)); + if( err < 0 ) SHOW_RESULT( cyg_fs_setinfo, err ); +#endif + + calculate_interval( &mountt ); + diag_printf(" Mount %8d.%03d ms\n", (int)(mountt.us_interval/1000), (int)(mountt.us_interval%1000) ); + + err = access( TEST_MOUNTPOINT TEST_DIRECTORY, F_OK ); + if( err < 0 && errno != EACCES ) SHOW_RESULT( access, err ); + + if( err < 0 && errno == EACCES ) + { + diag_printf("<INFO>: create %s\n", + TEST_MOUNTPOINT TEST_DIRECTORY); + err = mkdir( TEST_MOUNTPOINT TEST_DIRECTORY, 0 ); + if( err < 0 ) SHOW_RESULT( mkdir, err ); + } + + err = chdir( TEST_MOUNTPOINT TEST_DIRECTORY ); + if( err < 0 ) SHOW_RESULT( chdir, err ); + + checkcwd( TEST_MOUNTPOINT TEST_DIRECTORY ); + + listdir( TEST_MOUNTPOINT TEST_DIRECTORY, true, -1, &existingdirents ); + + // -------------------------------------------------------------- +#if defined(CYGSEM_FILEIO_BLOCK_USAGE) + err = cyg_fs_getinfo(TEST_MOUNTPOINT, FS_INFO_BLOCK_USAGE, + &usage, sizeof(usage)); + if( err < 0 ) SHOW_RESULT( cyg_fs_getinfo, err ); + diag_printf("<INFO>: total size: %6lld blocks, %10lld bytes\n", + usage.total_blocks, usage.total_blocks * usage.block_size); + diag_printf("<INFO>: free size: %6lld blocks, %10lld bytes\n", + usage.free_blocks, usage.free_blocks * usage.block_size); + diag_printf("<INFO>: block size: %6u bytes\n", usage.block_size); +#endif + // -------------------------------------------------------------- + +#endif + +#if 1 + createfile( "yaffs5.0", 1024*1024, 16*1024 ); + checkfile( "yaffs5.0",16*1024 ); + err = unlink( "yaffs5.0" ); + sync(); +#endif + +#if 1 + createfile( "yaffs5.0", 200*1024, 1024 ); + checkfile( "yaffs5.0", 1024 ); + err = unlink( "yaffs5.0" ); +#endif + +#if 1 + createfile( "yaffs5.1", 1024*1024, 1024 ); + createfile( "yaffs5.2", 1024*1024, 4*1024 ); + sync(); + createfile( "yaffs5.3", 8*1024*1024, 32*1024 ); + + checkfile( "yaffs5.1", 1024 ); + checkfile( "yaffs5.2", 4*1024 ); + checkfile( "yaffs5.3", 32*1024 ); + + diag_printf("\n--------------------------------------------------------------------\n"); + + listdir( "." , true, existingdirents+3, NULL ); + + // -------------------------------------------------------------- + + diag_printf("<INFO>: unlink yaffs5.1\n"); + err = unlink( "yaffs5.1" ); + if( err < 0 ) SHOW_RESULT( unlink, err ); + + diag_printf("<INFO>: unlink yaffs5.2\n"); + err = unlink( "yaffs5.2" ); + if( err < 0 ) SHOW_RESULT( unlink, err ); + + diag_printf("<INFO>: unlink yaffs5.3\n"); + err = unlink( "yaffs5.3" ); + if( err < 0 ) SHOW_RESULT( unlink, err ); +#endif + + // -------------------------------------------------------------- + +#if 1 && defined(DO_UMOUNT) + + diag_printf("<INFO>: unlink yaffs5.4\n"); + err = unlink( "yaffs5.4" ); + + createfile( "yaffs5.4", 5*1024*1024, 32*1024 ); +#endif + + // -------------------------------------------------------------- + +#ifdef DO_UMOUNT + diag_printf("<INFO>: cd /\n"); + err = chdir( "/" ); + if( err == 0 ) + { + checkcwd( "/" ); + + diag_printf("<INFO>: umount %s\n",TEST_MOUNTPOINT); + get_timestamp( &umountt.start ); + err = umount( TEST_MOUNTPOINT ); + get_timestamp( &umountt.end ); + if( err < 0 ) SHOW_RESULT( umount, err ); + + calculate_interval( &umountt ); + diag_printf(" Umount %8d.%03d ms\n", (int)(umountt.us_interval/1000), (int)(umountt.us_interval%1000) ); + + } +#endif + +#if 1 + + diag_printf("<INFO>: syncing\n"); + sync(); + + checkfile1(TEST_MOUNTPOINT TEST_DIRECTORY "/yaffs5.4", 32*1024 ); + + // Remount just to remove yaffs5.4 + err = mount( TEST_DEVICE, TEST_MOUNTPOINT, TEST_FSTYPE ); + if( err < 0 ) { + SHOW_RESULT( mount, err ); + CYG_TEST_FAIL_FINISH("yaffs5"); + } + err = unlink( TEST_MOUNTPOINT TEST_DIRECTORY "/yaffs5.4" ); + if( err < 0 ) SHOW_RESULT( unlink, err ); + err = umount( TEST_MOUNTPOINT ); + if( err < 0 ) SHOW_RESULT( umount, err ); + +#endif + + diag_printf("<INFO>: syncing\n"); + sync(); + + CYG_TEST_PASS_FINISH("yaffs5"); +} + +// ------------------------------------------------------------------------- + +#include <cyg/kernel/kapi.h> + +static cyg_handle_t thread_handle; +static cyg_thread thread; +static char stack[CYGNUM_HAL_STACK_SIZE_TYPICAL+8*1024]; +//static char stack[64*1024]; + +externC void +cyg_start( void ) +{ + cyg_thread_create(3, // Priority - just a number + yaffs5_main, // entry + 0, // index + 0, // no name + &stack[0], // Stack + sizeof(stack), // Size + &thread_handle, // Handle + &thread // Thread data structure + ); + cyg_thread_resume(thread_handle); + + cyg_scheduler_start(); +} + +// ------------------------------------------------------------------------- +// EOF yaffs5.c
