--- a/Kconfig
+++ b/Kconfig
@@ -12,8 +12,8 @@ config YAFFS_FS
 	  YAFFS2, or Yet Another Flash Filing System, is a filing system
 	  optimised for NAND Flash chips.
 
-	  To compile the YAFFS2 file system support as a module, choose M here:
-	  the module will be called yaffs2.
+	  To compile the YAFFS2 file system support as a module, choose M
+	  here: the module will be called yaffs2.
 
 	  If unsure, say N.
 
@@ -26,6 +26,8 @@ config YAFFS_YAFFS1
 	default y
 	help
 	  Enable YAFFS1 support -- yaffs for 512 byte / page devices
+	  
+	  Not needed for 2K-page devices.
 
 	  If unsure, say Y.
 
@@ -44,9 +46,9 @@ config YAFFS_ECC_WRONG_ORDER
 	depends on YAFFS_FS && YAFFS_DOES_ECC
 	default n
 	help
-	  This makes yaffs_ecc.c use the same ecc byte order as
-	  Steven Hill's nand_ecc.c. If not set, then you get the
-	  same ecc byte order as SmartMedia.
+	  This makes yaffs_ecc.c use the same ecc byte order as Steven
+	  Hill's nand_ecc.c. If not set, then you get the same ecc byte
+	  order as SmartMedia.
 
 	  If unsure, say N.
 
@@ -55,7 +57,7 @@ config YAFFS_YAFFS2
 	depends on YAFFS_FS
 	default y
 	help
-	  Enable YAFFS2 support -- yaffs for >= 2048 byte / page larger devices
+	  Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices
 
 	  If unsure, say Y.
 
@@ -66,7 +68,8 @@ config YAFFS_AUTO_YAFFS2
 	help
 	  Without this, you need to explicitely use yaffs2 as the file
 	  system type. With this, you can say "yaffs" and yaffs or yaffs2
-          will be used depending on the device page size.
+	  will be used depending on the device page size (yaffs on
+	  512-byte page devices, yaffs2 on 2K page devices).
 
 	  If unsure, say Y.
 
@@ -95,31 +98,34 @@ config YAFFS_CHECKPOINT_RESERVED_BLOCKS
 	depends on YAFFS_YAFFS2
 	default 10
 	help
-	  Give the number of Blocks to reserve for checkpointing. These Blocks
-	  are reserved per partition, so if you have very small partitions the
-	  default (10) may be a mess for you. 
-	  You can set this value to 0, but that does not mean checkpointing is
-	  disabled at all. There only won't be any specially reserved blocks for
-	  checkpointing, so if there is enough free space on the filesystem,
-	  it will be used for checkpointing.
+          Give the number of Blocks to reserve for checkpointing.
+	  Checkpointing saves the state at unmount so that mounting is
+	  much faster as a scan of all the flash to regenerate this state
+	  is not needed.  These Blocks are reserved per partition, so if
+	  you have very small partitions the default (10) may be a mess
+	  for you.  You can set this value to 0, but that does not mean
+	  checkpointing is disabled at all. There only won't be any
+	  specially reserved blocks for checkpointing, so if there is
+	  enough free space on the filesystem, it will be used for
+	  checkpointing.
 
-	  If unsure, leave at default (10), but don't wonder if there are always
-	  2MB used on your large page device partition (10 x 2k pagesize). When
-	  using small partitions or when being very small on space, you probably
-	  want to set this to zero.
+	  If unsure, leave at default (10), but don't wonder if there are
+	  always 2MB used on your large page device partition (10 x 2k
+	  pagesize). When using small partitions or when being very small
+	  on space, you probably want to set this to zero.
 
 config YAFFS_DISABLE_WIDE_TNODES
 	bool "Turn off wide tnodes"
 	depends on YAFFS_FS
 	default n
 	help
-	  Wide tnodes are only used for large NAND arrays (>=32MB for
-	  512-byte page devices and >=128MB for 2k page devices). They use 
-	  slightly more RAM but are faster since they eliminate chunk group
+	  Wide tnodes are only used for NAND arrays >=32MB for 512-byte
+	  page devices and >=128MB for 2k page devices. They use slightly
+	  more RAM but are faster since they eliminate chunk group
 	  searching.
 
-	  Setting this to 'y' will force tnode width to 16 bits and make
-	  large arrays slower.
+	  Setting this to 'y' will force tnode width to 16 bits and save
+	  memory but make large arrays slower.
 
 	  If unsure, say N.
 
@@ -129,15 +135,15 @@ config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
 	default n
 	help
           Normally YAFFS only checks chunks before writing until an erased
-	  chunk is found. This helps to detect any partially written chunks
-	  that might have happened due to power loss.
+	  chunk is found. This helps to detect any partially written
+	  chunks that might have happened due to power loss.
 
 	  Enabling this forces on the test that chunks are erased in flash
-	  before writing to them. This takes more time but is potentially a 
-	  bit more secure.
+	  before writing to them. This takes more time but is potentially
+	  a bit more secure.
  
-	  Suggest setting Y during development and ironing out driver issues
-	  etc. Suggest setting to N if you want faster writing.                  
+	  Suggest setting Y during development and ironing out driver
+	  issues etc. Suggest setting to N if you want faster writing.  
 
 	  If unsure, say Y.