new file mode 100644
--- /dev/null
+++ b/packages/hal/arm/cma230/current/include/hal_cache.h
@@ -0,0 +1,169 @@
+#ifndef CYGONCE_HAL_CACHE_H
+#define CYGONCE_HAL_CACHE_H
+
+//=============================================================================
+//
+//      hal_cache.h
+//
+//      HAL cache control API
+//
+//=============================================================================
+//####COPYRIGHTBEGIN####
+//
+// -------------------------------------------
+// The contents of this file are subject to the Cygnus eCos Public License
+// Version 1.0 (the "License"); you may not use this file except in
+// compliance with the License.  You may obtain a copy of the License at
+// http://sourceware.cygnus.com/ecos
+// 
+// Software distributed under the License is distributed on an "AS IS"
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
+// License for the specific language governing rights and limitations under
+// the License.
+// 
+// The Original Code is eCos - Embedded Cygnus Operating System, released
+// September 30, 1998.
+// 
+// The Initial Developer of the Original Code is Cygnus.  Portions created
+// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved.
+// -------------------------------------------
+//
+//####COPYRIGHTEND####
+//=============================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):   nickg, gthomas
+// Contributors:        nickg, gthomas
+// Date:        1998-09-28
+// Purpose:     Cache control API
+// Description: The macros defined here provide the HAL APIs for handling
+//              cache control operations.
+// Usage:
+//              #include <cyg/hal/hal_cache.h>
+//              ...
+//              
+//
+//####DESCRIPTIONEND####
+//
+//=============================================================================
+
+#include <cyg/infra/cyg_type.h>
+
+//-----------------------------------------------------------------------------
+// Cache dimensions
+
+// Data cache
+#define HAL_DCACHE_SIZE                 0    // Size of data cache in bytes
+#define HAL_DCACHE_LINE_SIZE            0    // Size of a data cache line
+#define HAL_DCACHE_WAYS                 0    // Associativity of the cache
+
+// Instruction cache
+#define HAL_ICACHE_SIZE                 0    // Size of cache in bytes
+#define HAL_ICACHE_LINE_SIZE            0    // Size of a cache line
+#define HAL_ICACHE_WAYS                 0    // Associativity of the cache
+
+#define HAL_DCACHE_SETS (HAL_DCACHE_SIZE/(HAL_DCACHE_LINE_SIZE*HAL_DCACHE_WAYS))
+#define HAL_ICACHE_SETS (HAL_ICACHE_SIZE/(HAL_ICACHE_LINE_SIZE*HAL_ICACHE_WAYS))
+
+//-----------------------------------------------------------------------------
+// Global control of data cache
+
+// Enable the data cache
+#define HAL_DCACHE_ENABLE()
+
+// Disable the data cache
+#define HAL_DCACHE_DISABLE()
+
+// Invalidate the entire cache
+#define HAL_DCACHE_INVALIDATE_ALL()
+
+// Synchronize the contents of the cache with memory.
+#define HAL_DCACHE_SYNC()
+
+// Purge contents of data cache
+#define HAL_DCACHE_PURGE_ALL()
+
+// Set the data cache refill burst size
+//#define HAL_DCACHE_BURST_SIZE(_size_)
+
+// Set the data cache write mode
+//#define HAL_DCACHE_WRITE_MODE( _mode_ )
+
+//#define HAL_DCACHE_WRITETHRU_MODE       0
+//#define HAL_DCACHE_WRITEBACK_MODE       1
+
+// Load the contents of the given address range into the data cache
+// and then lock the cache so that it stays there.
+//#define HAL_DCACHE_LOCK(_base_, _size_)
+
+// Undo a previous lock operation
+//#define HAL_DCACHE_UNLOCK(_base_, _size_)
+
+// Unlock entire cache
+//#define HAL_DCACHE_UNLOCK_ALL()
+
+//-----------------------------------------------------------------------------
+// Data cache line control
+
+// Allocate cache lines for the given address range without reading its
+// contents from memory.
+//#define HAL_DCACHE_ALLOCATE( _base_ , _size_ )
+
+// Write dirty cache lines to memory and invalidate the cache entries
+// for the given address range.
+//#define HAL_DCACHE_FLUSH( _base_ , _size_ )
+
+// Invalidate cache lines in the given range without writing to memory.
+//#define HAL_DCACHE_INVALIDATE( _base_ , _size_ )
+
+// Write dirty cache lines to memory for the given address range.
+//#define HAL_DCACHE_STORE( _base_ , _size_ )
+
+// Preread the given range into the cache with the intention of reading
+// from it later.
+//#define HAL_DCACHE_READ_HINT( _base_ , _size_ )
+
+// Preread the given range into the cache with the intention of writing
+// to it later.
+//#define HAL_DCACHE_WRITE_HINT( _base_ , _size_ )
+
+// Allocate and zero the cache lines associated with the given range.
+//#define HAL_DCACHE_ZERO( _base_ , _size_ )
+
+//-----------------------------------------------------------------------------
+// Global control of Instruction cache
+
+// Enable the instruction cache
+#define HAL_ICACHE_ENABLE()
+
+// Disable the instruction cache
+#define HAL_ICACHE_DISABLE()
+
+// Invalidate the entire cache
+#define HAL_ICACHE_INVALIDATE_ALL()
+
+// Synchronize the contents of the cache with memory.
+#define HAL_ICACHE_SYNC()
+
+// Set the instruction cache refill burst size
+//#define HAL_ICACHE_BURST_SIZE(_size_)
+
+// Load the contents of the given address range into the instruction cache
+// and then lock the cache so that it stays there.
+//#define HAL_ICACHE_LOCK(_base_, _size_)
+
+// Undo a previous lock operation
+//#define HAL_ICACHE_UNLOCK(_base_, _size_)
+
+// Unlock entire cache
+//#define HAL_ICACHE_UNLOCK_ALL()
+
+//-----------------------------------------------------------------------------
+// Instruction cache line control
+
+// Invalidate cache lines in the given range without writing to memory.
+//#define HAL_ICACHE_INVALIDATE( _base_ , _size_ )
+
+//-----------------------------------------------------------------------------
+#endif // ifndef CYGONCE_HAL_CACHE_H
+// End of hal_cache.h