new file mode 100644
--- /dev/null
+++ b/packages/hal/arm/cma230/current/include/pkgconf/hal_arm_cma230.h
@@ -0,0 +1,147 @@
+#ifndef CYGONCE_PKGCONF_HAL_ARM_CMA230_H
+#define CYGONCE_PKGCONF_HAL_ARM_CMA230_H
+// ====================================================================
+//
+//      pkgconf/hal_arm_cma230.h
+//
+//      HAL configuration file
+//
+// ====================================================================
+//####COPYRIGHTBEGIN####
+//
+// -------------------------------------------
+// The contents of this file are subject to the Cygnus eCos Public License
+// Version 1.0 (the "License"); you may not use this file except in
+// compliance with the License.  You may obtain a copy of the License at
+// http://sourceware.cygnus.com/ecos
+// 
+// Software distributed under the License is distributed on an "AS IS"
+// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
+// License for the specific language governing rights and limitations under
+// the License.
+// 
+// The Original Code is eCos - Embedded Cygnus Operating System, released
+// September 30, 1998.
+// 
+// The Initial Developer of the Original Code is Cygnus.  Portions created
+// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved.
+// -------------------------------------------
+//
+//####COPYRIGHTEND####
+// ====================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):           gthomas
+// Contributors:        gthomas
+// Date:                1999-04-21
+// Purpose:             To allow the user to edit HAL configuration options.
+// Description:
+//
+//####DESCRIPTIONEND####
+//
+// ====================================================================
+
+
+/* ---------------------------------------------------------------------
+   {{CFG_DATA
+
+   cdl_package CYGPKG_HAL_ARM_CMA230 {
+       display  "Cogent Computer Systems CMA230 board"
+       type     radio
+       parent   CYGPKG_HAL_ARM
+       description "
+           The cma230 HAL package provides the support needed to run
+           eCos on a Cogent Computer Systems CMA230 board."
+   }
+
+   cdl_option CYGHWR_HAL_ARM_CMA230_STARTUP {
+       display          "Startup type"
+       parent           CYGPKG_HAL_ARM_CMA230
+       #type             count
+       type             enum
+       legal_values     ram rom stubs
+       startup
+       description      "
+           When targetting the CMA230 board it is possible to build
+           the system for either RAM bootstrap or ROM bootstrap(s). Select
+           'ram' when building programs to load into RAM using onboard
+           debug software such as Angel or eCos GDB stubs.  Select 'rom'
+           when building a stand-alone application which will be put
+           into ROM.  Selection of 'stubs' is for the special case of
+           building the eCos GDB stubs themselves."
+   }
+   
+   }}CFG_DATA */
+
+#define CYGHWR_HAL_ARM_CMA230_STARTUP       ram
+
+/* ---------------------------------------------------------------------
+   {{CFG_DATA
+   cdl_option CYGHWR_HAL_ARM_CMA230_DIAG_PORT {
+       display          "Diagnostic serial port"
+       parent           CYGPKG_HAL_ARM_CMA230
+       type             enum
+       legal_values     0 1
+       description      "
+           The CMA230 board has two separate serial ports.  This option
+           chooses which of these ports will be used."
+   }
+   
+   }}CFG_DATA */
+#define CYGHWR_HAL_ARM_CMA230_DIAG_PORT     0
+
+/* ---------------------------------------------------------------------
+   {{CFG_DATA
+   cdl_option CYGHWR_HAL_ARM_CMA230_DIAG_BAUD {
+       display          "Diagnostic serial port baud rate"
+       parent           CYGPKG_HAL_ARM_CMA230
+       type             enum
+       legal_values     9600 19200 38400 115200
+       description      "
+           This option selects the baud rate used for the diagnostic port.
+           Note: this should match the value chosen for the GDB port if the
+           diagnostic and GDB port are the same."
+   }
+   
+   }}CFG_DATA */
+#define CYGHWR_HAL_ARM_CMA230_DIAG_BAUD     38400
+
+/* ---------------------------------------------------------------------
+   {{CFG_DATA
+   cdl_option CYGHWR_HAL_ARM_CMA230_GDB_PORT {
+       display          "GDB serial port"
+       parent           CYGPKG_HAL_ARM_CMA230
+       type             enum
+       legal_values     0 1
+       description      "
+           The CMA230 board has two separate serial ports.  This option
+           chooses which of these ports will be used to connect to a host
+           running GDB."
+   }
+   
+   }}CFG_DATA */
+#define CYGHWR_HAL_ARM_CMA230_GDB_PORT     0
+
+/* ---------------------------------------------------------------------
+   {{CFG_DATA
+   cdl_option CYGHWR_HAL_ARM_CMA230_GDB_BAUD {
+       display          "GDB serial port baud rate"
+       parent           CYGPKG_HAL_ARM_CMA230
+       type             enum
+       legal_values     9600 19200 38400 115200
+       description      "
+           This option controls the baud rate used for the GDB connection."
+   }
+   
+   }}CFG_DATA */
+#define CYGHWR_HAL_ARM_CMA230_GDB_BAUD     38400
+
+// Real-time clock/counter specifics
+
+#define CYGNUM_HAL_RTC_NUMERATOR     1000000000
+#define CYGNUM_HAL_RTC_DENOMINATOR   100
+#define CYGNUM_HAL_RTC_PERIOD        5000   // 2us clock
+
+/* -------------------------------------------------------------------*/
+#endif  /* CYGONCE_PKGCONF_HAL_ARM_CMA230_H */
+/* EOF hal_arm_cma230.h */