#ifndef CYGONCE_HAL_IO_H
#define CYGONCE_HAL_IO_H

//=============================================================================
//
//      hal_io.h
//
//      HAL device IO register support.
//
//=============================================================================
//####COPYRIGHTBEGIN####
//
// -------------------------------------------
// The contents of this file are subject to the Cygnus eCos Public License
// Version 1.0 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://sourceware.cygnus.com/ecos
// 
// Software distributed under the License is distributed on an "AS IS"
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the
// License for the specific language governing rights and limitations under
// the License.
// 
// The Original Code is eCos - Embedded Cygnus Operating System, released
// September 30, 1998.
// 
// The Initial Developer of the Original Code is Cygnus.  Portions created
// by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved.
// -------------------------------------------
//
//####COPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   nickg, hmt
// Contributors:        nickg, hmt
// Date:        1998-02-17
// Purpose:     Define IO register support
// Description: The macros defined here provide the HAL APIs for handling
//              device IO control registers.
//              
// Usage:
//              #include <cyg/hal/hal_io.h>
//              ...
//              
//
//####DESCRIPTIONEND####
//
//=============================================================================

#include <pkgconf/system.h>

#include <cyg/infra/cyg_type.h>

//-----------------------------------------------------------------------------
// Enforce in-order IO for all HAL reads/writes using this macro.
#define HAL_IO_BARRIER()                        \
    asm volatile ( "" : : : "memory" )

//-----------------------------------------------------------------------------
// IO Register address.
// This type is for recording the address of an IO register.

typedef volatile CYG_ADDRWORD HAL_IO_REGISTER;

//-----------------------------------------------------------------------------
// BYTE Register access.
// Individual and vectorized access to 8 bit registers.

#define HAL_READ_UINT8( _register_, _value_ )           \
    CYG_MACRO_START                                     \
    ((_value_) = *((volatile CYG_BYTE *)(_register_))); \
    HAL_IO_BARRIER ();                                  \
    CYG_MACRO_END

#define HAL_WRITE_UINT8( _register_, _value_ )          \
    CYG_MACRO_START                                     \
    (*((volatile CYG_BYTE *)(_register_)) = (_value_)); \
    HAL_IO_BARRIER ();                                  \
    CYG_MACRO_END

#define HAL_READ_UINT8_VECTOR( _register_, _buf_, _count_, _step_ )     \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        (_buf_)[_i_] = ((volatile CYG_BYTE *)(_register_))[_j_];        \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END

#define HAL_WRITE_UINT8_VECTOR( _register_, _buf_, _count_, _step_ )    \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        ((volatile CYG_BYTE *)(_register_))[_j_] = (_buf_)[_i_];        \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END


//-----------------------------------------------------------------------------
// 16 bit access.
// Individual and vectorized access to 16 bit registers.
    
#define HAL_READ_UINT16( _register_, _value_ )                  \
    CYG_MACRO_START                                             \
    ((_value_) = *((volatile CYG_WORD16 *)(_register_)));       \
    HAL_IO_BARRIER ();                                          \
    CYG_MACRO_END

#define HAL_WRITE_UINT16( _register_, _value_ )                 \
    CYG_MACRO_START                                             \
    (*((volatile CYG_WORD16 *)(_register_)) = (_value_));       \
    HAL_IO_BARRIER ();                                          \
    CYG_MACRO_END

#define HAL_READ_UINT16_VECTOR( _register_, _buf_, _count_, _step_ )    \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        (_buf_)[_i_] = ((volatile CYG_WORD16 *)(_register_))[_j_];      \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END

#define HAL_WRITE_UINT16_VECTOR( _register_, _buf_, _count_, _step_ )   \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        ((volatile CYG_WORD16 *)(_register_))[_j_] = (_buf_)[_i_];      \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END

//-----------------------------------------------------------------------------
// 32 bit access.
// Individual and vectorized access to 32 bit registers.
    
#define HAL_READ_UINT32( _register_, _value_ )                  \
    CYG_MACRO_START                                             \
    ((_value_) = *((volatile CYG_WORD32 *)(_register_)));       \
    HAL_IO_BARRIER ();                                          \
    CYG_MACRO_END

#define HAL_WRITE_UINT32( _register_, _value_ )                 \
    CYG_MACRO_START                                             \
    (*((volatile CYG_WORD32 *)(_register_)) = (_value_));       \
    HAL_IO_BARRIER ();                                          \
    CYG_MACRO_END

#define HAL_READ_UINT32_VECTOR( _register_, _buf_, _count_, _step_ )    \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        (_buf_)[_i_] = ((volatile CYG_WORD32 *)(_register_))[_j_];      \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END

#define HAL_WRITE_UINT32_VECTOR( _register_, _buf_, _count_, _step_ )   \
    CYG_MACRO_START                                                     \
    cyg_count32 _i_,_j_;                                                \
    for( _i_ = 0, _j_ = 0; _i_ < (_count_); _i_++, _j_ += (_step_)) {   \
        ((volatile CYG_WORD32 *)(_register_))[_j_] = (_buf_)[_i_];      \
        HAL_IO_BARRIER ();                                              \
    }                                                                   \
    CYG_MACRO_END
    
//-----------------------------------------------------------------------------

#ifndef CYGPKG_HAL_SPARCLITE_SIM
#include <cyg/hal/hal_hwio.h>
#endif // Not the SPARClite simulator

#endif // ifndef CYGONCE_HAL_IO_H
// End of hal_io.h