Mercurial > flash_v2
view packages/hal/sh/arch/current/include/hal_intr.h @ 82:6736c52df507 ecos-sw-2000-04-14
Merge from eCos master repository on 2000-04-14-13:35:46-BST
| author | jlarmour |
|---|---|
| date | Tue, 18 Apr 2000 21:51:55 +0000 |
| parents | 2085233a121a |
| children | 489eb5632bc3 |
line wrap: on
line source
#ifndef CYGONCE_HAL_INTR_H #define CYGONCE_HAL_INTR_H //========================================================================== // // hal_intr.h // // HAL Interrupt and clock support // //========================================================================== //####COPYRIGHTBEGIN#### // // ------------------------------------------- // The contents of this file are subject to the Red Hat eCos Public License // Version 1.1 (the "License"); you may not use this file except in // compliance with the License. You may obtain a copy of the License at // http://www.redhat.com/ // // Software distributed under the License is distributed on an "AS IS" // basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the // License for the specific language governing rights and limitations under // the License. // // The Original Code is eCos - Embedded Configurable Operating System, // released September 30, 1998. // // The Initial Developer of the Original Code is Red Hat. // Portions created by Red Hat are // Copyright (C) 1998, 1999, 2000 Red Hat, Inc. // All Rights Reserved. // ------------------------------------------- // //####COPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): jskov // Contributors: jskov, // Date: 1999-04-24 // Purpose: Define Interrupt support // Description: The macros defined here provide the HAL APIs for handling // interrupts and the clock. // // Usage: // #include <cyg/hal/hal_intr.h> // ... // // //####DESCRIPTIONEND#### // //========================================================================== #include <pkgconf/hal.h> #include CYGBLD_HAL_CPU_MODULES_H // INTC module selection // More include statements below. First part of this file must be // usable for both assembly and C files, so only use defines here. //-------------------------------------------------------------------------- // SH3 exception vectors. These correspond to VSRs and are the values // to use for HAL_VSR_GET/SET // // Note that exceptions are decoded - there is a VSR slot for each exception // source, while interrupts are handled via the same VSR. #define CYGNUM_HAL_VECTOR_POWERON 0 // power-on #define CYGNUM_HAL_VECTOR_RESET 1 // reset #define CYGNUM_HAL_VECTOR_TLBMISS_ACCESS 2 // TLB-miss/invalid load #define CYGNUM_HAL_VECTOR_TLBMISS_WRITE 3 // TLB-miss/invalid store #define CYGNUM_HAL_VECTOR_INITIAL_WRITE 4 // initial page write #define CYGNUM_HAL_VECTOR_TLBERROR_ACCESS 5 // TLB prot violation l #define CYGNUM_HAL_VECTOR_TLBERROR_WRITE 6 // TLB prot violation s #define CYGNUM_HAL_VECTOR_DATA_ACCESS 7 // address error (load) #define CYGNUM_HAL_VECTOR_DATA_WRITE 8 // address error (store) // define CYGNUM_HAL_VECTOR_RESERVED_9 9 // define CYGNUM_HAL_VECTOR_RESERVED_10 10 #define CYGNUM_HAL_VECTOR_TRAP 11 // unconditional trap #define CYGNUM_HAL_VECTOR_ILLEGAL_INSTRUCTION 12 // reserved instruction #define CYGNUM_HAL_VECTOR_ILLEGAL_SLOT_INSTRUCTION 13 // illegal instruction in delay slot // define CYGNUM_HAL_VECTOR_RESERVED_14 14 #define CYGNUM_HAL_VECTOR_INSTRUCTION_BP 15 // user breakpoint #define CYG_VECTOR_IS_INTERRUPT(v) \ (CYGNUM_HAL_VECTOR_INSTRUCTION_BP < (v)) #define CYGNUM_HAL_VECTOR_INTERRUPT 16 // all interrupts #define CYGNUM_HAL_VSR_MIN CYGNUM_HAL_VECTOR_POWERON #define CYGNUM_HAL_VSR_MAX CYGNUM_HAL_VECTOR_INTERRUPT #define CYGNUM_HAL_VSR_COUNT ( CYGNUM_HAL_VSR_MAX + 1 ) #define CYGNUM_HAL_VSR_EXCEPTION_COUNT (CYGNUM_HAL_VECTOR_INSTRUCTION_BP-CYGNUM_HAL_VECTOR_POWERON+1) // The decoded interrupts. #define CYGNUM_HAL_INTERRUPT_NMI 0 #define CYGNUM_HAL_INTERRUPT_RESERVED_1E0 1 #define CYGNUM_HAL_INTERRUPT_LVL0 2 #define CYGNUM_HAL_INTERRUPT_LVL1 3 #define CYGNUM_HAL_INTERRUPT_LVL2 4 #define CYGNUM_HAL_INTERRUPT_LVL3 5 #define CYGNUM_HAL_INTERRUPT_LVL4 6 #define CYGNUM_HAL_INTERRUPT_LVL5 7 #define CYGNUM_HAL_INTERRUPT_LVL6 8 #define CYGNUM_HAL_INTERRUPT_LVL7 9 #define CYGNUM_HAL_INTERRUPT_LVL8 10 #define CYGNUM_HAL_INTERRUPT_LVL9 11 #define CYGNUM_HAL_INTERRUPT_LVL10 12 #define CYGNUM_HAL_INTERRUPT_LVL11 13 #define CYGNUM_HAL_INTERRUPT_LVL12 14 #define CYGNUM_HAL_INTERRUPT_LVL13 15 #define CYGNUM_HAL_INTERRUPT_LVL14 16 #define CYGNUM_HAL_INTERRUPT_RESERVED_3E0 17 #define CYGNUM_HAL_INTERRUPT_TMU0_TUNI0 18 #define CYGNUM_HAL_INTERRUPT_TMU1_TUNI1 19 #define CYGNUM_HAL_INTERRUPT_TMU2_TUNI2 20 #define CYGNUM_HAL_INTERRUPT_TMU2_TICPI2 21 #define CYGNUM_HAL_INTERRUPT_RTC_ATI 22 #define CYGNUM_HAL_INTERRUPT_RTC_PRI 23 #define CYGNUM_HAL_INTERRUPT_RTC_CUI 24 #define CYGNUM_HAL_INTERRUPT_SCI_ERI 25 #define CYGNUM_HAL_INTERRUPT_SCI_RXI 26 #define CYGNUM_HAL_INTERRUPT_SCI_TXI 27 #define CYGNUM_HAL_INTERRUPT_SCI_TEI 28 #define CYGNUM_HAL_INTERRUPT_WDT_ITI 29 #define CYGNUM_HAL_INTERRUPT_REF_RCMI 30 #define CYGNUM_HAL_INTERRUPT_REF_ROVI 31 #define CYGNUM_HAL_ISR_MAX CYGNUM_HAL_INTERRUPT_REF_ROVI // CYGNUM_HAL_ISR_COUNT must match CYG_ISR_TABLE_SIZE defined in vectors.S. #define CYGNUM_HAL_ISR_MIN CYGNUM_HAL_INTERRUPT_NMI #define CYGNUM_HAL_ISR_COUNT ( CYGNUM_HAL_ISR_MAX + 1 ) // Exception vectors. These are the values used when passed out to an // external exception handler using cyg_hal_deliver_exception() // The exception indexes are EXPEVT/0x20 #define CYGNUM_HAL_EXCEPTION_POWERON 0 // power-on #define CYGNUM_HAL_EXCEPTION_RESET 1 // reset #define CYGNUM_HAL_EXCEPTION_TLBMISS_ACCESS 2 // TLB-miss/invalid load #define CYGNUM_HAL_EXCEPTION_TLBMISS_WRITE 3 // TLB-miss/invalid store #define CYGNUM_HAL_EXCEPTION_INITIAL_WRITE 4 // initial page write #define CYGNUM_HAL_EXCEPTION_TLBERROR_ACCESS 5 // TLB prot violation l #define CYGNUM_HAL_EXCEPTION_TLBERROR_WRITE 6 // TLB prot violation s #define CYGNUM_HAL_EXCEPTION_DATA_ACCESS 7 // address error (load) #define CYGNUM_HAL_EXCEPTION_DATA_WRITE 8 // address error (store) // define CYGNUM_HAL_EXCEPTION_RESERVED_9 9 // define CYGNUM_HAL_EXCEPTION_RESERVED_10 10 #define CYGNUM_HAL_EXCEPTION_TRAP 11 // unconditional trap #define CYGNUM_HAL_EXCEPTION_ILLEGAL_INSTRUCTION 12 // reserved instruction #define CYGNUM_HAL_EXCEPTION_ILLEGAL_SLOT_INSTRUCTION 13 // illegal instruction in delay slot // define CYGNUM_HAL_EXCEPTION_RESERVED_14 14 #define CYGNUM_HAL_EXCEPTION_INSTRUCTION_BP 15 // user breakpoint #define CYGNUM_HAL_EXCEPTION_MIN CYGNUM_HAL_EXCEPTION_POWERON #define CYGNUM_HAL_EXCEPTION_MAX CYGNUM_HAL_EXCEPTION_INSTRUCTION_BP #define CYGNUM_HAL_EXCEPTION_COUNT \ ( CYGNUM_HAL_EXCEPTION_MAX - CYGNUM_HAL_EXCEPTION_MIN + 1 ) // The vector used by the Real time clock #define CYGNUM_HAL_INTERRUPT_RTC CYGNUM_HAL_INTERRUPT_TMU0_TUNI0 #ifndef __ASSEMBLER__ #include <cyg/infra/cyg_type.h> #include <cyg/hal/sh_regs.h> // register definitions #include <cyg/hal/hal_io.h> // io macros #include <cyg/infra/cyg_ass.h> // CYG_FAIL //-------------------------------------------------------------------------- // Static data used by HAL // ISR tables externC volatile CYG_ADDRESS hal_interrupt_handlers[CYGNUM_HAL_ISR_COUNT]; externC volatile CYG_ADDRWORD hal_interrupt_data[CYGNUM_HAL_ISR_COUNT]; externC volatile CYG_ADDRESS hal_interrupt_objects[CYGNUM_HAL_ISR_COUNT]; // VSR table externC volatile CYG_ADDRESS hal_vsr_table[CYGNUM_HAL_VSR_COUNT]; //-------------------------------------------------------------------------- // Default ISR externC cyg_uint32 hal_default_isr(CYG_ADDRWORD vector, CYG_ADDRWORD data); //-------------------------------------------------------------------------- // Interrupt state storage typedef cyg_uint32 CYG_INTERRUPT_STATE; //-------------------------------------------------------------------------- // Interrupt control macros // // Note that these macros control interrupt state by setting the Imask // of the SR rather than the (more obvious) BL. This is because a CPU // reset is forced if execptions (such as breakpoints) are generated // while the BL flag is set. #define HAL_DISABLE_INTERRUPTS(_old_) \ CYG_MACRO_START \ cyg_uint32 _tmp_; \ asm volatile ( \ "stc sr,%1 \n\t" \ "mov %2,%0 \n\t" \ "and %1,%0 \n\t" \ "or %2,%1 \n\t" \ "ldc %1,sr \n\t" \ : "=&r"(_old_), "=&r" (_tmp_) \ : "r" (CYGARC_REG_SR_IMASK) \ ); \ CYG_MACRO_END #define HAL_ENABLE_INTERRUPTS() \ CYG_MACRO_START \ cyg_uint32 _tmp_; \ asm volatile ( \ "stc sr,%0 \n\t" \ "and %1,%0 \n\t" \ "ldc %0,sr \n\t" \ : "=&r" (_tmp_) \ : "r" (~CYGARC_REG_SR_IMASK) \ ); \ CYG_MACRO_END #define HAL_RESTORE_INTERRUPTS(_old_) \ CYG_MACRO_START \ cyg_uint32 _tmp1_, _tmp2_; \ asm volatile ( \ "stc sr,%0 \n\t" \ "and %3,%0 \n\t" \ "not %3,%1 \n\t" \ "and %2,%1 \n\t" \ "or %1,%0 \n\t" \ "ldc %0,sr \n\t" \ : "=&r" (_tmp1_), "=&r" (_tmp2_) \ : "r" (_old_), "r" (~CYGARC_REG_SR_IMASK) \ ); \ CYG_MACRO_END #define HAL_QUERY_INTERRUPTS(_old_) \ CYG_MACRO_START \ asm volatile ( \ "stc sr,%0 \n\t" \ "and %1,%0 \n\t" \ : "=&r"(_old_) \ : "r" (CYGARC_REG_SR_IMASK) \ ); \ CYG_MACRO_END //-------------------------------------------------------------------------- // Vector translation. #ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN # define HAL_TRANSLATE_VECTOR(_vector_,_index_) (_index_) = 0 #else # define HAL_TRANSLATE_VECTOR(_vector_,_index_) (_index_) = (_vector_) #endif //-------------------------------------------------------------------------- // Routine to execute DSRs using separate interrupt stack #ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK externC void hal_interrupt_stack_call_pending_DSRs(void); #define HAL_INTERRUPT_STACK_CALL_PENDING_DSRS() \ hal_interrupt_stack_call_pending_DSRs() // these are offered solely for stack usage testing // if they are not defined, then there is no interrupt stack. #define HAL_INTERRUPT_STACK_BASE cyg_interrupt_stack_base #define HAL_INTERRUPT_STACK_TOP cyg_interrupt_stack // use them to declare these extern however you want: // extern char HAL_INTERRUPT_STACK_BASE[]; // extern char HAL_INTERRUPT_STACK_TOP[]; // is recommended #endif //-------------------------------------------------------------------------- // Interrupt and VSR attachment macros #define HAL_INTERRUPT_IN_USE( _vector_, _state_) \ CYG_MACRO_START \ cyg_uint32 _index_; \ HAL_TRANSLATE_VECTOR ((_vector_), _index_); \ \ if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)hal_default_isr ) \ (_state_) = 0; \ else \ (_state_) = 1; \ CYG_MACRO_END #define HAL_INTERRUPT_ATTACH( _vector_, _isr_, _data_, _object_ ) \ CYG_MACRO_START \ cyg_uint32 _index_; \ HAL_TRANSLATE_VECTOR ((_vector_), _index_); \ \ if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)hal_default_isr ) \ { \ hal_interrupt_handlers[_index_] = (CYG_ADDRESS)_isr_; \ hal_interrupt_data[_index_] = (CYG_ADDRWORD) _data_; \ hal_interrupt_objects[_index_] = (CYG_ADDRESS)_object_; \ } \ CYG_MACRO_END #define HAL_INTERRUPT_DETACH( _vector_, _isr_ ) \ CYG_MACRO_START \ cyg_uint32 _index_; \ HAL_TRANSLATE_VECTOR ((_vector_), _index_); \ \ if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)_isr_ ) \ { \ hal_interrupt_handlers[_index_] = (CYG_ADDRESS)hal_default_isr; \ hal_interrupt_data[_index_] = 0; \ hal_interrupt_objects[_index_] = 0; \ } \ CYG_MACRO_END #define HAL_VSR_GET( _vector_, _pvsr_ ) \ *(CYG_ADDRESS *)(_pvsr_) = hal_vsr_table[_vector_]; #define HAL_VSR_SET( _vector_, _vsr_, _poldvsr_ ) \ CYG_MACRO_START \ if( _poldvsr_ != NULL ) \ *(CYG_ADDRESS *)_poldvsr_ = hal_vsr_table[_vector_]; \ hal_vsr_table[_vector_] = (CYG_ADDRESS)_vsr_; \ CYG_MACRO_END // This is an ugly name, but what it means is: grab the VSR back to eCos // internal handling, or if you like, the default handler. But if // cooperating with GDB and CygMon, the default behaviour is to pass most // exceptions to CygMon. This macro undoes that so that eCos handles the // exception. So use it with care. externC void cyg_hal_default_interrupt_vsr( void ); externC void cyg_hal_default_exception_vsr( void ); #define HAL_VSR_SET_TO_ECOS_HANDLER( _vector_, _poldvsr_ ) \ CYG_MACRO_START \ if( (void*)_poldvsr_ != (void*)NULL ) \ *(CYG_ADDRESS *)_poldvsr_ = hal_vsr_table[_vector_]; \ hal_vsr_table[_vector_] = ( CYG_VECTOR_IS_INTERRUPT( _vector_ ) \ ? (CYG_ADDRESS)cyg_hal_default_interrupt_vsr \ : (CYG_ADDRESS)cyg_hal_default_exception_vsr ); \ CYG_MACRO_END //-------------------------------------------------------------------------- // Interrupt controller access // // Note: These macros work only on a unit basis ; if one source in a // unit (such as SCI) is unmasked, all sources of that unit get // unmasked. Finer control must be done in the driver/apps. #ifdef CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING externC cyg_uint8 cyg_hal_ILVL_table[]; #define HAL_UPDATE_ILVL_TABLE(_vector_, _level_) \ /* Update the ILVL table, so it is easy for the interrupt entry */ \ /* code to find out the level of a given interrupt source. */ \ cyg_hal_ILVL_table[(_vector_)] = (_level_) #else #define HAL_UPDATE_ILVL_TABLE(_vector_, _level_) #endif #define HAL_INTERRUPT_SET_LEVEL( _vector_, _level_ ) \ CYG_MACRO_START \ cyg_uint16 iprX; \ \ CYG_ASSERT((0 <= (_level_) && 15 >= (_level_)), "Illegal level"); \ CYG_ASSERT((CYGNUM_HAL_ISR_MIN <= (_vector_) \ && CYGNUM_HAL_ISR_MAX >= (_vector_)), "Illegal vector"); \ \ HAL_UPDATE_ILVL_TABLE(_vector_, _level_); \ \ switch( (_vector_) ) { \ case CYGNUM_HAL_INTERRUPT_NMI: \ /* fall through */ \ case CYGNUM_HAL_INTERRUPT_LVL0...CYGNUM_HAL_INTERRUPT_LVL14: \ /* Cannot change levels */ \ break; \ \ /* IPRA */ \ case CYGNUM_HAL_INTERRUPT_TMU0_TUNI0: \ HAL_READ_UINT16(CYGARC_REG_IPRA, iprX); \ iprX &= ~CYGARC_REG_IPRA_TMU0_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRA_TMU0_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRA, iprX); \ break; \ case CYGNUM_HAL_INTERRUPT_TMU1_TUNI1: \ HAL_READ_UINT16(CYGARC_REG_IPRA, iprX); \ iprX &= ~CYGARC_REG_IPRA_TMU1_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRA_TMU1_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRA, iprX); \ break; \ case CYGNUM_HAL_INTERRUPT_TMU2_TUNI2: \ case CYGNUM_HAL_INTERRUPT_TMU2_TICPI2: \ HAL_READ_UINT16(CYGARC_REG_IPRA, iprX); \ iprX &= ~CYGARC_REG_IPRA_TMU2_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRA_TMU2_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRA, iprX); \ break; \ case CYGNUM_HAL_INTERRUPT_RTC_ATI: \ case CYGNUM_HAL_INTERRUPT_RTC_PRI: \ case CYGNUM_HAL_INTERRUPT_RTC_CUI: \ HAL_READ_UINT16(CYGARC_REG_IPRA, iprX); \ iprX &= ~CYGARC_REG_IPRA_RTC_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRA_RTC_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRA, iprX); \ break; \ \ /* IPRB */ \ case CYGNUM_HAL_INTERRUPT_SCI_ERI: \ case CYGNUM_HAL_INTERRUPT_SCI_RXI: \ case CYGNUM_HAL_INTERRUPT_SCI_TXI: \ case CYGNUM_HAL_INTERRUPT_SCI_TEI: \ HAL_READ_UINT16(CYGARC_REG_IPRB, iprX); \ iprX &= ~CYGARC_REG_IPRB_SCI_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRB_SCI_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRB, iprX); \ break; \ case CYGNUM_HAL_INTERRUPT_WDT_ITI: \ HAL_READ_UINT16(CYGARC_REG_IPRB, iprX); \ iprX &= ~CYGARC_REG_IPRB_WDT_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRB_WDT_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRB, iprX); \ break; \ case CYGNUM_HAL_INTERRUPT_REF_RCMI: \ case CYGNUM_HAL_INTERRUPT_REF_ROVI: \ HAL_READ_UINT16(CYGARC_REG_IPRB, iprX); \ iprX &= ~CYGARC_REG_IPRB_REF_MASK; \ iprX |= (_level_)*CYGARC_REG_IPRB_REF_PRI1; \ HAL_WRITE_UINT16(CYGARC_REG_IPRB, iprX); \ break; \ \ case CYGNUM_HAL_INTERRUPT_RESERVED_1E0: \ case CYGNUM_HAL_INTERRUPT_RESERVED_3E0: \ /* Do nothing for these reserved vectors. */ \ break; \ } \ CYG_MACRO_END #define HAL_INTERRUPT_MASK( _vector_ ) \ CYG_MACRO_START \ switch( (_vector_) ) { \ case CYGNUM_HAL_INTERRUPT_NMI: \ /* fall through */ \ case CYGNUM_HAL_INTERRUPT_LVL0...CYGNUM_HAL_INTERRUPT_LVL14: \ /* Can only be masked by fiddling Imask in SR. */ \ break; \ case CYGNUM_HAL_INTERRUPT_TMU0_TUNI0...CYGNUM_HAL_ISR_MAX: \ HAL_INTERRUPT_SET_LEVEL((_vector_), 0); \ break; \ case CYGNUM_HAL_INTERRUPT_RESERVED_1E0: \ case CYGNUM_HAL_INTERRUPT_RESERVED_3E0: \ /* Do nothing for these reserved vectors. */ \ break; \ default: \ CYG_FAIL("Unknown interrupt vector"); \ break; \ } \ CYG_MACRO_END #define HAL_INTERRUPT_UNMASK( _vector_ ) \ CYG_MACRO_START \ switch( (_vector_) ) { \ case CYGNUM_HAL_INTERRUPT_NMI: \ /* fall through */ \ case CYGNUM_HAL_INTERRUPT_LVL0...CYGNUM_HAL_INTERRUPT_LVL14: \ /* Can only be unmasked by fiddling Imask in SR. */ \ break; \ case CYGNUM_HAL_INTERRUPT_TMU0_TUNI0...CYGNUM_HAL_ISR_MAX: \ HAL_INTERRUPT_SET_LEVEL((_vector_), 1); \ break; \ case CYGNUM_HAL_INTERRUPT_RESERVED_1E0: \ case CYGNUM_HAL_INTERRUPT_RESERVED_3E0: \ /* Do nothing for these reserved vectors. */ \ break; \ default: \ CYG_FAIL("Unknown interrupt vector"); \ break; \ } \ CYG_MACRO_END #define HAL_INTERRUPT_ACKNOWLEDGE( _vector_ ) #define HAL_INTERRUPT_CONFIGURE( _vector_, _level_, _up_ ) //-------------------------------------------------------------------------- // Clock control // Using TMU counter 0, clocked at p/4, with peripheral clock // sourced directly from the 15MHz crystal (which is the default setup // on the EDK). This means 150000/4 oscillations in 1/100 second. #define HAL_CLOCK_INITIALIZE( _period_ ) \ CYG_MACRO_START \ register cyg_uint8 _tstr_; \ \ /* Disable timer while programming it. */ \ HAL_READ_UINT8(CYGARC_REG_TSTR, _tstr_); \ _tstr_ &= ~CYGARC_REG_TSTR_STR0; \ HAL_WRITE_UINT8(CYGARC_REG_TSTR, _tstr_); \ \ /* Set counter registers. */ \ HAL_WRITE_UINT32(CYGARC_REG_TCOR0, (_period_)); \ HAL_WRITE_UINT32(CYGARC_REG_TCNT0, (_period_)); \ \ /* Set interrupt on underflow, decrement frequency at 1/4 of */ \ /* peripheral clock. */ \ HAL_WRITE_UINT16(CYGARC_REG_TCR0, CYGARC_REG_TCR_UNIE); \ \ /* Enable timer. */ \ _tstr_ |= CYGARC_REG_TSTR_STR0; \ HAL_WRITE_UINT8(CYGARC_REG_TSTR, _tstr_); \ \ CYG_MACRO_END #define HAL_CLOCK_RESET( _vector_, _period_ ) \ CYG_MACRO_START \ register cyg_uint16 _tcr_; \ \ /* Clear underflow flag. */ \ HAL_READ_UINT16(CYGARC_REG_TCR0, _tcr_); \ _tcr_ &= ~CYGARC_REG_TCR_UNF; \ HAL_WRITE_UINT16(CYGARC_REG_TCR0, _tcr_); \ HAL_READ_UINT16(CYGARC_REG_TCR0, _tcr_); \ \ CYG_MACRO_END #define HAL_CLOCK_READ( _pvalue_ ) \ CYG_MACRO_START \ register cyg_uint32 _result_; \ \ HAL_READ_UINT32(CYGARC_REG_TCNT0, _result_); \ \ *(_pvalue_) = CYGNUM_KERNEL_COUNTERS_RTC_PERIOD-_result_; \ CYG_MACRO_END #ifdef CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY #define HAL_CLOCK_LATENCY( _pvalue_ ) HAL_CLOCK_READ(_pvalue_) #endif #endif // __ASSEMBLER__ //-------------------------------------------------------------------------- #endif // ifndef CYGONCE_HAL_INTR_H // End of hal_intr.h