Mercurial > flash_v2
changeset 1049:d0c85774766f
* src/eb40a_misc.c:
LED routines were using the wrong bits.
* include/plf_io.h
LED defines were using the wrong bits
Added defines for the EB40a board push buttons
| author | asl |
|---|---|
| date | Thu, 12 Jun 2003 17:03:56 +0000 |
| parents | 4d9dfbffc2d1 |
| children | c07b9a1eed80 |
| files | packages/hal/arm/at91/eb40a/current/ChangeLog packages/hal/arm/at91/eb40a/current/include/plf_io.h packages/hal/arm/at91/eb40a/current/src/eb40a_misc.c |
| diffstat | 3 files changed, 38 insertions(+), 14 deletions(-) [+] |
line wrap: on
line diff
--- a/packages/hal/arm/at91/eb40a/current/ChangeLog +++ b/packages/hal/arm/at91/eb40a/current/ChangeLog @@ -1,3 +1,12 @@ +2003-06-11 Oyvind Harboe <oyvind.harboe@zylin.com> + + * src/eb40a_misc.c: + LED routines were using the wrong bits. + + * include/plf_io.h + LED defines were using the wrong bits + Added defines for the EB40a board push buttons + 2003-05-12 Nick Garnett <nickg@balti.calivar.com> * src/eb40a_misc.c:
--- a/packages/hal/arm/at91/eb40a/current/include/plf_io.h +++ b/packages/hal/arm/at91/eb40a/current/include/plf_io.h @@ -53,15 +53,30 @@ // //============================================================================= -// EB40A onboard LEDs mapped to PIO pins -#define EB40A_LED1 0x00010000 -#define EB40A_LED2 0x00020000 -#define EB40A_LED3 0x00040000 -#define EB40A_LED4 0x00080000 -#define EB40A_LED5 0x00000008 -#define EB40A_LED6 0x00000010 -#define EB40A_LED7 0x00000020 -#define EB40A_LED8 0x00000040 +// these io pins are for the LEDs. +#define EB40A_LED1 0x00000008 +#define EB40A_LED2 0x00000010 +#define EB40A_LED3 0x00000020 +#define EB40A_LED4 0x00000040 +// these PIOs double as TCLK1, TIOA1, TIOB1, TCLK2 respectively. +#define EB40A_LED5 0x00010000 +#define EB40A_LED6 0x00020000 +#define EB40A_LED7 0x00040000 +#define EB40A_LED8 0x00080000 + +#define EB40A_LED_ALL 0x00f00078 + +// Push buttons. Note that these are connected to interrupt lines. +#define EB40A_SW1 0x00001000 +#define EB40A_SW2 0x00000100 +#define EB40A_SW3 0x00000002 +#define EB40A_SW4 0x00000004 + +// Push buttons. Note that these are connected to interrupt lines. +#define EB40A_SW1 0x00001000 +#define EB40A_SW2 0x00000100 +#define EB40A_SW3 0x00000002 +#define EB40A_SW4 0x00000004 //----------------------------------------------------------------------------- // end of plf_io.h
--- a/packages/hal/arm/at91/eb40a/current/src/eb40a_misc.c +++ b/packages/hal/arm/at91/eb40a/current/src/eb40a_misc.c @@ -62,16 +62,16 @@ void hal_at91_set_leds(int val) { - HAL_WRITE_UINT32(AT91_PIO+AT91_PIO_SODR, 0x000F0078); // turn all LEDs off + HAL_WRITE_UINT32(AT91_PIO+AT91_PIO_SODR, EB40A_LED_ALL); // turn all LEDs off HAL_WRITE_UINT32(AT91_PIO+AT91_PIO_CODR, - ((val&0xf)<<3)|((val&0xf0)<<12)); // turn desired LEDs on + ((val&0xf)<<16)|(((val&0xf0)>>4)<<3)); // turn desired LEDs on } void hal_at91_led_on(int val) { HAL_WRITE_UINT32(AT91_PIO+AT91_PIO_CODR, - ((val&0xf)<<3)|((val&0xf0)<<12)); + ((val&0xf)<<16)|(((val&0xf0)>>4)<<3)); } void @@ -82,11 +82,11 @@ hal_at91_led_off(int val) } int -hal_at91_get_leds() +hal_at91_get_leds(void) { int leds = 0; HAL_READ_UINT32(AT91_PIO+AT91_PIO_PDSR, leds); - return ((leds>>3)&0xf)|((leds>>12)&0xf0); + return (((leds>>3)&0xf)<<4)|((leds>>16)&0xf); } //--------------------------------------------------------------------------