Mercurial > flash_v2
changeset 1423:440ddbf97b39
2003-09-21 Jonathan Larmour <jifl@eCosCentric.com>
* cdl/hal_sh.cdl: CYGHWR_HAL_SH_FPU_REGS is only needed if there's an
FPU.
* include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Use FPSCR
init value from HAL register definitions.
2003-09-19 John Dallaway <jld@ecoscentric.com>
* cdl/hal_sh.cdl: Specify default CDL values for sh4_202_md target.
2003-09-11 Nick Garnett <nickg@ecoscentric.com>
* include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Changed
initial value of fpscr to do round-to-nearest rather than
round-to-zero.
2003-09-08 Nick Garnett <nickg@ecoscentric.com>
* src/vectors.S (cyg_hal_default_exception_vsr): Added code to
switch to interrupt stack when fielding exceptions from RedBoot or
some other ROM monitor. Without this we get potential stack
overflows when debugging via the network.
2003-09-05 Nick Garnett <nickg@ecoscentric.com>
* include/hal_arch.h:
* include/hal_var_bank.h:
* include/hal_var_bank.inc:
* src/context.S:
Added support for floating point state save and restore and GDB
* src/hal_misc.c (hal_delay_us): Fixed implementation of this
routine so that it actually works.
* src/hal_syscall.c:
Added support for all supportable syscalls.
* src/sh_stub.c:
Added check in __is_bsp_syscall() for trap 34 traps using the TRA
register.
* src/vectors.S: Set startup stack size to the same as the
interrupt stack size. In some configurations of RedBoot the
previous value was too small.
* include/sh_stub.h:
Fixed HAL_STUB_PLATFORM_STUBS_FIXUP() to only rewind for a
breakpoint. Traps are not rewound.
* cdl/hal_sh.cdl: Added option for SH architecture FP register
count.
| author | nickg |
|---|---|
| date | Fri, 05 Dec 2003 17:06:23 +0000 |
| parents | d5f61a251ca3 |
| children | 5268028c09c4 |
| files | packages/hal/sh/arch/current/ChangeLog packages/hal/sh/arch/current/cdl/hal_sh.cdl packages/hal/sh/arch/current/include/hal_arch.h packages/hal/sh/arch/current/include/hal_var_bank.h packages/hal/sh/arch/current/include/hal_var_bank.inc packages/hal/sh/arch/current/include/sh_stub.h packages/hal/sh/arch/current/src/context.S packages/hal/sh/arch/current/src/hal_misc.c packages/hal/sh/arch/current/src/hal_syscall.c packages/hal/sh/arch/current/src/sh_stub.c packages/hal/sh/arch/current/src/vectors.S |
| diffstat | 11 files changed, 422 insertions(+), 34 deletions(-) [+] |
line wrap: on
line diff
--- a/packages/hal/sh/arch/current/ChangeLog +++ b/packages/hal/sh/arch/current/ChangeLog @@ -3,6 +3,60 @@ 2003-12-05 Andrew Lunn <andrew.lunn@as * include/hal_intr_excevt.h: * include/hal_intr_vecs.h: hal_delay_us() is a C function. +2003-09-21 Jonathan Larmour <jifl@eCosCentric.com> + + * cdl/hal_sh.cdl: CYGHWR_HAL_SH_FPU_REGS is only needed if there's an + FPU. + + * include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Use FPSCR + init value from HAL register definitions. + +2003-09-19 John Dallaway <jld@ecoscentric.com> + + * cdl/hal_sh.cdl: Specify default CDL values for sh4_202_md target. + +2003-09-11 Nick Garnett <nickg@ecoscentric.com> + + * include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Changed + initial value of fpscr to do round-to-nearest rather than + round-to-zero. + +2003-09-08 Nick Garnett <nickg@ecoscentric.com> + + * src/vectors.S (cyg_hal_default_exception_vsr): Added code to + switch to interrupt stack when fielding exceptions from RedBoot or + some other ROM monitor. Without this we get potential stack + overflows when debugging via the network. + +2003-09-05 Nick Garnett <nickg@ecoscentric.com> + + * include/hal_arch.h: + * include/hal_var_bank.h: + * include/hal_var_bank.inc: + * src/context.S: + Added support for floating point state save and restore and GDB + + * src/hal_misc.c (hal_delay_us): Fixed implementation of this + routine so that it actually works. + + * src/hal_syscall.c: + Added support for all supportable syscalls. + + * src/sh_stub.c: + Added check in __is_bsp_syscall() for trap 34 traps using the TRA + register. + + * src/vectors.S: Set startup stack size to the same as the + interrupt stack size. In some configurations of RedBoot the + previous value was too small. + + * include/sh_stub.h: + Fixed HAL_STUB_PLATFORM_STUBS_FIXUP() to only rewind for a + breakpoint. Traps are not rewound. + + * cdl/hal_sh.cdl: Added option for SH architecture FP register + count. + 2003-07-29 Gary Thomas <gary@mlbassoc.com> on behalf of 2003-07-29 Yoshinori Sato <ysato@users.sourceforge.jp>
--- a/packages/hal/sh/arch/current/cdl/hal_sh.cdl +++ b/packages/hal/sh/arch/current/cdl/hal_sh.cdl @@ -9,6 +9,7 @@ ## ------------------------------------------- ## This file is part of eCos, the Embedded Configurable Operating System. ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +## Copyright (C) 2003 Nick Garnett ## ## eCos is free software; you can redistribute it and/or modify it under ## the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ ######DESCRIPTIONBEGIN#### # # Author(s): jskov -# Original data: jskov +# Original data: jskov, nickg # Contributors: # Date: 1999-10-29 # @@ -130,6 +131,17 @@ cdl_package CYGPKG_HAL_SH { calculated !CYGHWR_HAL_SH_FPU } + cdl_option CYGHWR_HAL_SH_FPU_REGS { + display "Variant FPU register count" + flavor data + active_if CYGHWR_HAL_SH_FPU + default_value 16 + legal_values { 16 32 } + description "Number of FPU registers present. The SH3 has + 16 registers in one bank. The SH4 has 32 + registers in two banks." + } + cdl_option CYGHWR_HAL_SH_BIGENDIAN { display "Use big-endian mode" default_value { (CYGINT_HAL_SH_PLF_BIGENDIAN_DEFAULT != 0) \
--- a/packages/hal/sh/arch/current/include/hal_arch.h +++ b/packages/hal/sh/arch/current/include/hal_arch.h @@ -12,6 +12,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -44,7 +45,7 @@ //#####DESCRIPTIONBEGIN#### // // Author(s): jskov -// Contributors:jskov +// Contributors:jskov, nickg // Date: 1999-04-24 // Purpose: Define architecture abstractions // Usage: #include <cyg/hal/hal_arch.h> @@ -169,11 +170,15 @@ externC void hal_idle_thread_action(cyg_ #define CYGNUM_HAL_STACK_FRAME_SIZE (4 * 10) // Stack needed for a context switch (shreg_context_size from sh.inc) -#define CYGNUM_HAL_STACK_CONTEXT_SIZE (4 * 21) +#ifndef CYGHWR_HAL_SH_FPU +#define CYGNUM_HAL_STACK_CONTEXT_SIZE (4 * 24) +#else +#define CYGNUM_HAL_STACK_CONTEXT_SIZE (4 * (26 + CYGHWR_HAL_SH_FPU_REGS)) +#endif // Interrupt + call to ISR, interrupt_end() and the DSR #define CYGNUM_HAL_STACK_INTERRUPT_SIZE \ - ((24*4 /* sizeof(HAL_SavedRegisters) */) + 2 * CYGNUM_HAL_STACK_FRAME_SIZE) + (CYGNUM_HAL_STACK_CONTEXT_SIZE + 2 * CYGNUM_HAL_STACK_FRAME_SIZE) // We define a minimum stack size as the minimum any thread could ever // legitimately get away with. We can throw asserts if users ask for less
--- a/packages/hal/sh/arch/current/include/hal_var_bank.h +++ b/packages/hal/sh/arch/current/include/hal_var_bank.h @@ -11,6 +11,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -43,7 +44,7 @@ //#####DESCRIPTIONBEGIN#### // // Author(s): jskov -// Contributors:jskov +// Contributors:jskov, nickg // Date: 2002-01-11 // Purpose: Architecture abstractions for variants with banked registers // @@ -60,6 +61,13 @@ typedef struct cyg_uint32 r[16]; // Data regs cyg_uint32 macl; // Multiply and accumulate - low cyg_uint32 mach; // Multiply and accumulate - high + +#ifdef CYGHWR_HAL_SH_FPU + cyg_uint32 fr[CYGHWR_HAL_SH_FPU_REGS]; // Floating point registers + cyg_uint32 fpul; // Floating point comm reg + cyg_uint32 fpscr; // Floating point status/control reg +#endif + cyg_uint32 pr; // Procedure Reg cyg_uint32 sr; // Status Reg cyg_uint32 pc; // Program Counter @@ -86,6 +94,20 @@ typedef struct // _entry_ entry point address. // _id_ bit pattern used in initializing registers, for debugging. +#ifdef CYGHWR_HAL_SH_FPU +#include <cyg/hal/sh_regs.h> +#define HAL_THREAD_INIT_CONTEXT_FPU( _regs_ ) \ +{ \ + int _i_; \ + (_regs_)->fpul = 0; \ + (_regs_)->fpscr = CYG_FPSCR; \ + for( _i_ = 0; _i_ < CYGHWR_HAL_SH_FPU_REGS; _i_++ ) \ + (_regs_)->fr[_i_] = 0; \ +} +#else +#define HAL_THREAD_INIT_CONTEXT_FPU( _regs_ ) +#endif + #define HAL_THREAD_INIT_CONTEXT( _sparg_, _thread_, _entry_, _id_ ) \ CYG_MACRO_START \ register CYG_WORD _sp_ = (CYG_WORD)_sparg_; \ @@ -101,8 +123,9 @@ typedef struct (_regs_)->mach = 0; /* MACH = 0 */ \ (_regs_)->macl = 0; /* MACL = 0 */ \ (_regs_)->pr = (CYG_WORD)(_entry_); /* PR = entry point */ \ - (_regs_)->sr = 0; /* SR = enable interrupts */ \ + (_regs_)->sr = 0x70000000; /* SR = enable interrupts */ \ (_regs_)->pc = (CYG_WORD)(_entry_); /* set PC for thread dbg */ \ + HAL_THREAD_INIT_CONTEXT_FPU( _regs_ ); /* Init FPU state */ \ _sparg_ = (CYG_ADDRESS)_regs_; \ CYG_MACRO_END @@ -114,6 +137,29 @@ typedef struct #define HAL_THREAD_GET_SAVED_REGISTERS( _sp_, _regs_ ) \ (_regs_) = (HAL_SavedRegisters *)(_sp_) +#ifdef CYGHWR_HAL_SH_FPU +#define HAL_GET_GDB_REGISTERS_FPU( _regval_, _regs_ ) \ +{ \ + _regval_[23] = (_regs_)->fpul; \ + _regval_[24] = (_regs_)->fpscr; \ + \ + for( _i_ = 0; _i_ < 16; _i_++ ) \ + _regval_[25+_i_] = (_regs_)->fr[_i_]; \ +} + +#define HAL_SET_GDB_REGISTERS_FPU( _regs_, _regval_ ) \ +{ \ + (_regs_)->fpul = _regval_[23]; \ + (_regs_)->fpscr = _regval_[24]; \ + \ + for( _i_ = 0; _i_ < 16; _i_++ ) \ + (_regs_)->fr[_i_] = _regval_[25+_i_]; \ +} +#else +#define HAL_GET_GDB_REGISTERS_FPU( _regval_, _regs_ ) +#define HAL_SET_GDB_REGISTERS_FPU( _regs_, _regval_ ) +#endif + // Copy a set of registers from a HAL_SavedRegisters structure into a // GDB ordered array. #define HAL_GET_GDB_REGISTERS( _aregval_, _regs_ ) \ @@ -121,7 +167,14 @@ typedef struct CYG_ADDRWORD *_regval_ = (CYG_ADDRWORD *)(_aregval_); \ int _i_; \ \ - for( _i_ = 0; _i_ < 16; _i_++ ) \ + for( _i_ = 0; _i_ < 8; _i_++ ) \ + { \ + _regval_[_i_] = (_regs_)->r[_i_]; \ + _regval_[43+_i_] = (_regs_)->r[_i_]; \ + _regval_[51+_i_] = 0; \ + } \ + \ + for( /* _i_ = 8 */ ; _i_ < 16; _i_++ ) \ _regval_[_i_] = (_regs_)->r[_i_]; \ \ _regval_[16] = (_regs_)->pc; \ @@ -132,7 +185,8 @@ typedef struct _regval_[21] = (_regs_)->macl; \ _regval_[22] = (_regs_)->sr; \ \ - /* 23-51 not used atm. */ \ + HAL_GET_GDB_REGISTERS_FPU( _regval_, _regs_ ); \ + \ CYG_MACRO_END // Copy a GDB ordered array into a HAL_SavedRegisters structure. @@ -151,6 +205,9 @@ typedef struct (_regs_)->mach = _regval_[20]; \ (_regs_)->macl = _regval_[21]; \ (_regs_)->sr = _regval_[22]; \ + \ + HAL_SET_GDB_REGISTERS_FPU( _regs_, _regval_ ); \ + \ CYG_MACRO_END //--------------------------------------------------------------------------
--- a/packages/hal/sh/arch/current/include/hal_var_bank.inc +++ b/packages/hal/sh/arch/current/include/hal_var_bank.inc @@ -9,6 +9,7 @@ ## ------------------------------------------- ## This file is part of eCos, the Embedded Configurable Operating System. ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +## Copyright (C) 2003 Nick Garnett ## ## eCos is free software; you can redistribute it and/or modify it under ## the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ #######DESCRIPTIONBEGIN#### ## ## Author(s): jskov -## Contributors: jskov +## Contributors: jskov, nickg ## Date: 2002-01-11 ## Purpose: SH support code for variants using register banks ## @@ -207,6 +208,50 @@ 2: mov.l r0,@-r15 ! SR sts.l pr,@-r15 ! PR + +#ifdef CYGHWR_HAL_SH_FPU + sts.l fpscr,@-r15 + sts.l fpul,@-r15 + mov.l 3f,r0 ! set FPSCR to known value + lds r0,fpscr +#if CYGHWR_HAL_SH_FPU_REGS == 32 + frchg + fmov.s fr15,@-r15 + fmov.s fr14,@-r15 + fmov.s fr13,@-r15 + fmov.s fr12,@-r15 + fmov.s fr11,@-r15 + fmov.s fr10,@-r15 + fmov.s fr9,@-r15 + fmov.s fr8,@-r15 + fmov.s fr7,@-r15 + fmov.s fr6,@-r15 + fmov.s fr5,@-r15 + fmov.s fr4,@-r15 + fmov.s fr3,@-r15 + fmov.s fr2,@-r15 + fmov.s fr1,@-r15 + fmov.s fr0,@-r15 + frchg +#endif + fmov.s fr15,@-r15 + fmov.s fr14,@-r15 + fmov.s fr13,@-r15 + fmov.s fr12,@-r15 + fmov.s fr11,@-r15 + fmov.s fr10,@-r15 + fmov.s fr9,@-r15 + fmov.s fr8,@-r15 + fmov.s fr7,@-r15 + fmov.s fr6,@-r15 + fmov.s fr5,@-r15 + fmov.s fr4,@-r15 + fmov.s fr3,@-r15 + fmov.s fr2,@-r15 + fmov.s fr1,@-r15 + fmov.s fr0,@-r15 +#endif + sts.l mach,@-r15 ! mach sts.l macl,@-r15 ! macl @@ -234,6 +279,7 @@ 2: nop .align 2 1: .long CYG_SR +3: .long CYG_FPSCR # ------------------------------------------------------------ # Register bank has changed now. 2: @@ -285,6 +331,48 @@ 2: lds.l @r0+,macl ! macl lds.l @r0+,mach ! mach + +#ifdef CYGHWR_HAL_SH_FPU + fmov.s @r0+,fr0 + fmov.s @r0+,fr1 + fmov.s @r0+,fr2 + fmov.s @r0+,fr3 + fmov.s @r0+,fr4 + fmov.s @r0+,fr5 + fmov.s @r0+,fr6 + fmov.s @r0+,fr7 + fmov.s @r0+,fr8 + fmov.s @r0+,fr9 + fmov.s @r0+,fr10 + fmov.s @r0+,fr11 + fmov.s @r0+,fr12 + fmov.s @r0+,fr13 + fmov.s @r0+,fr14 + fmov.s @r0+,fr15 +#if CYGHWR_HAL_SH_FPU_REGS == 32 + frchg + fmov.s @r0+,fr0 + fmov.s @r0+,fr1 + fmov.s @r0+,fr2 + fmov.s @r0+,fr3 + fmov.s @r0+,fr4 + fmov.s @r0+,fr5 + fmov.s @r0+,fr6 + fmov.s @r0+,fr7 + fmov.s @r0+,fr8 + fmov.s @r0+,fr9 + fmov.s @r0+,fr10 + fmov.s @r0+,fr11 + fmov.s @r0+,fr12 + fmov.s @r0+,fr13 + fmov.s @r0+,fr14 + fmov.s @r0+,fr15 + frchg +#endif + lds.l @r0+,fpul + lds.l @r0+,fpscr +#endif + lds.l @r0+,pr ! PR mov.l @r0+,r2 @@ -303,7 +391,6 @@ 2: nop .align 2 1: .long CYG_SR_BANK1 - .endm #--------------------------------------------------------------------------- @@ -313,11 +400,12 @@ 1: .long CYG_SR_BANK1 mov.l @r0,r4 mov #-5,r0 ! divide cause by 0x20 shld r0,r4 - mov #CYGARC_SHREG_EVENT,r0 + mov.l 3f,r0 bra 2f mov.l r4,@(r0,r15) ! store decoded vector number back .align 2 1: .long CYGARC_REG_EXCEVT +3: .long CYGARC_SHREG_EVENT 2: .endm
--- a/packages/hal/sh/arch/current/include/sh_stub.h +++ b/packages/hal/sh/arch/current/include/sh_stub.h @@ -12,6 +12,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -44,7 +45,7 @@ //#####DESCRIPTIONBEGIN#### // // Author(s): jskov -// Contributors: jskov, +// Contributors: jskov, nickg // Date: 1999-05-18 // Purpose: Define SH stub stuff // @@ -71,7 +72,9 @@ enum regnames { FPUL, FPSCR, FP0, FP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP9, FP10, FP11, FP12, FP13, FP14, FP15, - SSR, SPC, ROB0, ROB1 + SSR, SPC, + ROB0, R1B0, R2B0, R3B0, R4B0, R5B0, R6B0, R7B0, + ROB1, R1B1, R2B1, R3B1, R4B1, R5B1, R6B1, R7B1 }; // For convenience @@ -119,7 +122,11 @@ extern void __clear_breakpoints (void); #define HAL_STUB_PLATFORM_STUBS_FIXUP() \ CYG_MACRO_START \ if (CYGNUM_HAL_EXCEPTION_TRAP == __get_trap_number()) \ - put_register(PC, get_register(PC) - 2); \ + { \ + CYG_ADDRESS pc = get_register(PC) - 2; \ + if( *(cyg_uint16 *)pc == HAL_BREAKINST ) \ + put_register(PC, pc); \ + } \ CYG_MACRO_END #ifdef __cplusplus
--- a/packages/hal/sh/arch/current/src/context.S +++ b/packages/hal/sh/arch/current/src/context.S @@ -9,6 +9,7 @@ ## ------------------------------------------- ## This file is part of eCos, the Embedded Configurable Operating System. ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +## Copyright (C) 2003 Nick Garnett ## ## eCos is free software; you can redistribute it and/or modify it under ## the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ #######DESCRIPTIONBEGIN#### ## ## Author(s): jskov -## Contributors:jskov +## Contributors:jskov, nickg ## Date: 1999-05-01 ## Purpose: SH context switch code ## Description: This file contains implementations of the thread context @@ -98,6 +99,48 @@ FUNC_START(hal_thread_switch_context) mov.l r1,@-r15 sts.l pr,@-r15 ! return address + +#ifdef CYGHWR_HAL_SH_FPU + sts.l fpscr,@-r15 + sts.l fpul,@-r15 +#if CYGHWR_HAL_SH_FPU_REGS == 32 + frchg + fmov.s fr15,@-r15 + fmov.s fr14,@-r15 + fmov.s fr13,@-r15 + fmov.s fr12,@-r15 + fmov.s fr11,@-r15 + fmov.s fr10,@-r15 + fmov.s fr9,@-r15 + fmov.s fr8,@-r15 + fmov.s fr7,@-r15 + fmov.s fr6,@-r15 + fmov.s fr5,@-r15 + fmov.s fr4,@-r15 + fmov.s fr3,@-r15 + fmov.s fr2,@-r15 + fmov.s fr1,@-r15 + fmov.s fr0,@-r15 + frchg +#endif + fmov.s fr15,@-r15 + fmov.s fr14,@-r15 + fmov.s fr13,@-r15 + fmov.s fr12,@-r15 + fmov.s fr11,@-r15 + fmov.s fr10,@-r15 + fmov.s fr9,@-r15 + fmov.s fr8,@-r15 + fmov.s fr7,@-r15 + fmov.s fr6,@-r15 + fmov.s fr5,@-r15 + fmov.s fr4,@-r15 + fmov.s fr3,@-r15 + fmov.s fr2,@-r15 + fmov.s fr1,@-r15 + fmov.s fr0,@-r15 +#endif + sts.l macl,@-r15 ! macl sts.l mach,@-r15 ! mach mov.l r0,@-r15 ! saved r15 (entry sp) @@ -153,6 +196,48 @@ FUNC_START(hal_thread_load_context) lds.l @r0+,mach ! mach lds.l @r0+,macl ! macl + +#ifdef CYGHWR_HAL_SH_FPU + fmov.s @r0+,fr0 + fmov.s @r0+,fr1 + fmov.s @r0+,fr2 + fmov.s @r0+,fr3 + fmov.s @r0+,fr4 + fmov.s @r0+,fr5 + fmov.s @r0+,fr6 + fmov.s @r0+,fr7 + fmov.s @r0+,fr8 + fmov.s @r0+,fr9 + fmov.s @r0+,fr10 + fmov.s @r0+,fr11 + fmov.s @r0+,fr12 + fmov.s @r0+,fr13 + fmov.s @r0+,fr14 + fmov.s @r0+,fr15 +#if CYGHWR_HAL_SH_FPU_REGS == 32 + frchg + fmov.s @r0+,fr0 + fmov.s @r0+,fr1 + fmov.s @r0+,fr2 + fmov.s @r0+,fr3 + fmov.s @r0+,fr4 + fmov.s @r0+,fr5 + fmov.s @r0+,fr6 + fmov.s @r0+,fr7 + fmov.s @r0+,fr8 + fmov.s @r0+,fr9 + fmov.s @r0+,fr10 + fmov.s @r0+,fr11 + fmov.s @r0+,fr12 + fmov.s @r0+,fr13 + fmov.s @r0+,fr14 + fmov.s @r0+,fr15 + frchg +#endif + lds.l @r0+,fpul + lds.l @r0+,fpscr +#endif + lds.l @r0+,pr ! pr mov r3,r15 ! update stack pointer
--- a/packages/hal/sh/arch/current/src/hal_misc.c +++ b/packages/hal/sh/arch/current/src/hal_misc.c @@ -9,6 +9,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -214,20 +215,32 @@ hal_delay_us(int usecs) volatile unsigned char *tstr = (volatile unsigned char *)CYGARC_REG_TSTR; volatile unsigned long *tcnt = (volatile unsigned long *)CYGARC_REG_TCNT1; volatile unsigned long *tcor = (volatile unsigned long *)CYGARC_REG_TCOR1; - unsigned long clocks_per_us = (CYGHWR_HAL_SH_ONCHIP_PERIPHERAL_SPEED+(CYGHWR_HAL_SH_TMU_PRESCALE_0-1))/CYGHWR_HAL_SH_TMU_PRESCALE_0; // Rounded up - int diff, diff2; - cyg_uint32 val1, val2; + volatile unsigned short *tcr = (volatile unsigned short *)CYGARC_REG_TCR1; + unsigned long clocks_per_us = (((CYGHWR_HAL_SH_ONCHIP_PERIPHERAL_SPEED/1000000) + + (CYGHWR_HAL_SH_TMU_PRESCALE_0-1)) / + CYGHWR_HAL_SH_TMU_PRESCALE_0); + volatile int diff, diff2; + volatile cyg_uint32 val1, val2; + *tcr = (( 4==CYGHWR_HAL_SH_TMU_PRESCALE_0) ? CYGARC_REG_TCR_TPSC_4 : + (16==CYGHWR_HAL_SH_TMU_PRESCALE_0) ? CYGARC_REG_TCR_TPSC_16: + (64==CYGHWR_HAL_SH_TMU_PRESCALE_0) ? CYGARC_REG_TCR_TPSC_64: + CYGARC_REG_TCR_TPSC_256); + + *tcnt = 0x0FFFFFFF; + *tcor = 0x0FFFFFFF; + _tstr = *tstr; *tstr |= CYGARC_REG_TSTR_STR1; // Enable channel 1 while (usecs-- > 0) { diff = 0; + val1 = *tcnt; while (diff < clocks_per_us) { - val1 = *tcnt; while ((val2 = *tcnt) == val1) ; - diff2 = val2 - val1; + diff2 = val1 - val2; if (diff2 < 0) diff2 += *tcor; diff += diff2; + val1 = val2; } } *tstr = _tstr; // Restore timer to previous state
--- a/packages/hal/sh/arch/current/src/hal_syscall.c +++ b/packages/hal/sh/arch/current/src/hal_syscall.c @@ -9,6 +9,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ //#####DESCRIPTIONBEGIN#### // // Author(s): msalter -// Contributors:msalter, jskov +// Contributors:msalter, jskov, nickg // Date: 2002-02-28 // Purpose: // Description: @@ -98,6 +99,10 @@ extern int __do_syscall(int func, // sy #define _shnewlib_SYS_pipe 42 #define _shnewlib_SYS_execve 59 +#define _shnewlib_SYS_argc 172 /* == 0xAC, for Argument Count :-) */ +#define _shnewlib_SYS_argnlen 173 +#define _shnewlib_SYS_argn 174 + #define _shnewlib_SYS_utime 201 /* not really a system call */ #define _shnewlib_SYS_wait 202 /* nor is this */ @@ -114,6 +119,9 @@ hal_syscall_handler(void) arg4 = *(unsigned int *)(get_register(SP)); switch (func) { + case _shnewlib_SYS_exit: + func = SYS_exit; + break; case _shnewlib_SYS_read: func = SYS_read; break; @@ -129,8 +137,36 @@ hal_syscall_handler(void) case _shnewlib_SYS_lseek: func = SYS_lseek; break; + case _shnewlib_SYS_unlink: + func = SYS_unlink; + break; + case _shnewlib_SYS_getpid: + func = SYS_getpid; + break; + case _shnewlib_SYS_fstat: + func = SYS_fstat; + break; + case _shnewlib_SYS_chdir: + func = SYS_chdir; + break; + case _shnewlib_SYS_stat: + func = SYS_stat; + break; + case _shnewlib_SYS_chmod: + func = SYS_chmod; + break; + case _shnewlib_SYS_time: + func = SYS_time; + break; + case _shnewlib_SYS_isatty: + func = SYS_isatty; + break; case _shnewlib_SYS_utime: func = SYS_utime; + case _shnewlib_SYS_argc: + put_register( R0, 0 ); + put_register( R1, 0 ); + return 0; default: return SIGTRAP; }
--- a/packages/hal/sh/arch/current/src/sh_stub.c +++ b/packages/hal/sh/arch/current/src/sh_stub.c @@ -9,6 +9,7 @@ // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2003 Nick Garnett // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ //#####DESCRIPTIONBEGIN#### // // Author(s): jskov -// Contributors: jskov, Ben Lee, Steve Chamberlain +// Contributors: jskov, Ben Lee, Steve Chamberlain, nickg // Date: 1999-05-18 // Description: GDB Stub support for sh CPU. // @@ -127,7 +128,12 @@ int #if defined(CYGSEM_REDBOOT_BSP_SYSCALLS) int __is_bsp_syscall(void) { - if (_hal_registers->event == 34) +#if defined(CYGARC_REG_TRA) + if (_hal_registers->event == 11 && + (*(CYG_WORD *)CYGARC_REG_TRA) == (34<<2)) +#else + if (_hal_registers->event == 34 ) +#endif return 1; else return 0;
--- a/packages/hal/sh/arch/current/src/vectors.S +++ b/packages/hal/sh/arch/current/src/vectors.S @@ -9,6 +9,7 @@ ## ------------------------------------------- ## This file is part of eCos, the Embedded Configurable Operating System. ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +## Copyright (C) 2003 Nick Garnett ## ## eCos is free software; you can redistribute it and/or modify it under ## the terms of the GNU General Public License as published by the Free @@ -41,7 +42,7 @@ #######DESCRIPTIONBEGIN#### ## ## Author(s): jskov -## Contributors: jskov, gthomas +## Contributors: jskov, gthomas, nickg ## Date: 1999-05-01 ## Purpose: SH exception vectors ## Description: This file defines the code placed into the exception @@ -111,21 +112,45 @@ 2: # the decoded exception number hal_exception_translate + mov r15,r4 ! R4 = register dump + +#if (defined(CYGSEM_HAL_ROM_MONITOR) || defined(CYGPKG_REDBOOT)) && \ + defined(CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK) + + mov.l $cyg_interrupt_stack_base,r0 + mov.l $cyg_interrupt_stack,r1 + cmp/hi r15,r0 ! if r0 > r15 or + bt 2f + cmp/hi r1,r15 ! if r15 > r1 + bf 1f +2: mov r1,r15 ! change to supervisor stack +1: mov.l r4,@-r15 ! save old stack pointer + +#endif + # The entire CPU state is now stashed on the stack, # call into C to do something with it. - mov r15,r4 ! R4 = register dump - - mov.l $restore_state,r0 ! get return link - lds r0,pr ! to procedure register - mov.l $cyg_hal_exception_handler,r0 - jmp @r0 ! call C code, r4 = registers + jsr @r0 ! call C code, r4 = registers nop +#if (defined(CYGSEM_HAL_ROM_MONITOR) || defined(CYGPKG_REDBOOT)) && \ + defined(CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK) + + # If we are returning from the last nested exception, move back + # to the thread stack. + # Since we have arranged for the top of stack location to + # contain the sp we need to go back to here, just pop it off + # and put it in SP. + + mov.l @r15,r15 +#endif + + bra restore_state + nop + .align 2 -$restore_state: - .long restore_state SYM_PTR_REF(cyg_hal_exception_handler) #--------------------------------------------------------------------------- @@ -589,10 +614,10 @@ SYM_DEF(cyg_interrupt_stack) #endif // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK -#ifdef CYGSEM_HAL_ROM_MONITOR +#if defined(CYGSEM_HAL_ROM_MONITOR) || defined(CYGPKG_REDBOOT) // Enough space for stub to handle downloads. If using thread capabilities // it will be using the RAM application's stack. -# define STARTUP_STACK_SIZE 1024 +# define STARTUP_STACK_SIZE CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE #else # ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK // Enough space to run constructors.